The FEAT_DoubleFault extension adds the following:
* All external aborts on instruction fetches and translation table
walks for instruction fetches must be synchronous. For QEMU this
is already true.
* SCR_EL3 has a new bit NMEA which disables the masking of SError
interrupts by PSTATE.A when the SError interrupt is taken to EL3.
For QEMU we only need to make the bit writable, because we have no
sources of SError interrupts.
* SCR_EL3 has a new bit EASE which causes synchronous external
aborts taken to EL3 to be taken at the same entry point as SError.
(Note that this does not mean that they are SErrors for purposes
of PSTATE.A masking or that the syndrome register reports them as
SErrors: it just means that the vector offset is different.)
* The existing SCTLR_EL3.IESB has an effective value of 1 when
SCR_EL3.NMEA is 1. For QEMU this is a no-op because we don't need
different behaviour based on IESB (we don't need to do anything to
ensure that error exceptions are synchronized).
So for QEMU the things we need to change are:
* Make SCR_EL3.{NMEA,EASE} writable
* When taking a synchronous external abort at EL3, adjust the
vector entry point if SCR_EL3.EASE is set
* Advertise the feature in the ID registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220531151431.949322-1-peter.maydell@linaro.org
We had a few CPTR_* bits defined, but missed quite a few.
Complete all of the fields up to ARMv9.2.
Use FIELD_EX64 instead of manual extract32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature adds a new register, HCRX_EL2, which controls
many of the newer AArch64 features. So far the register is
effectively RES0, because none of the new features are done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters instead of 4 for:
Cortex-A9, Cortex-A15, Cortex-A53, Cortex-A57, Cortex-A72,
Cortex-A76, Neoverse-N1, '-cpu max'
This CPU goes from 4 to 8 counters:
A64FX
These CPUs remain with 4 counters:
Cortex-A7, Cortex-A8
This CPU goes down from 4 to 3 counters:
Cortex-R5
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
This change was originally landed in commit f7fb73b8cd (during
the 6.0 release cycle) but was then reverted by commit
21c2dd77a6 before that release because it did not work with KVM.
This version fixes that by creating the scratch vCPU in
kvm_arm_get_host_cpu_features() with the KVM_ARM_VCPU_PMU_V3 feature
if KVM supports it, and then only asking KVM for the PMCR_EL0 value
if the vCPU has a PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Added the correct value for a64fx]
Message-id: 20220513122852.4063586-1-peter.maydell@linaro.org
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
The Armv8.4 feature FEAT_IDST specifies that exceptions generated by
read accesses to the feature ID space should report a syndrome code
of 0x18 (EC_SYSTEMREGISTERTRAP) rather than 0x00 (EC_UNCATEGORIZED).
The feature ID space is defined to be:
op0 == 3, op1 == {0,1,3}, CRn == 0, CRm == {0-7}, op2 == {0-7}
In our implementation we might return the EC_UNCATEGORIZED syndrome
value for a system register access in four cases:
* no reginfo struct in the hashtable
* cp_access_ok() fails (ie ri->access doesn't permit the access)
* ri->accessfn returns CP_ACCESS_TRAP_UNCATEGORIZED at runtime
* ri->type includes ARM_CP_RAISES_EXC, and the readfn raises
an UNDEF exception at runtime
We have very few regdefs that set ARM_CP_RAISES_EXC, and none of
them are in the feature ID space. (In the unlikely event that any
are added in future they would need to take care of setting the
correct syndrome themselves.) This patch deals with the other
three cases, and enables FEAT_IDST for AArch64 -cpu max.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509155457.3560724-1-peter.maydell@linaro.org
Implement the handling of FEAT_S2FWB; the meat of this is in the new
combined_attrs_fwb() function which combines S1 and S2 attributes
when HCR_EL2.FWB is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-4-peter.maydell@linaro.org
There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtual SError exceptions are raised by setting HCR_EL2.VSE,
and are routed to EL1 just like other virtual exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add only the system registers required to implement zero error
records. This means that all values for ERRSELR are out of range,
which means that it and all of the indexed error record registers
need not be implemented.
Add the EL2 registers required for injecting virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the aa64 predicate for detecting RAS support from id registers.
We already have the aa32 version from the M-profile work.
Add the 'any' predicate for testing both aa64 and aa32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move ARMCPRegInfo and all related declarations to a new
internal header, out of the public cpu.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220501055028.646596-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is incorrect in that it does not properly consider
CPTR_EL2.FPEN. We've already got another mechanism for raising
an FPU access trap: ARM_CP_FPU, so use that instead.
Remove CP_ACCESS_TRAP_FP_EL{2,3}, which becomes unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bool is a more appropriate type for this value.
Adjust the assignments to use true/false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCTLR_ELx fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update SCR_EL3 fields per ARM DDI0487 H.a.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update isar fields per ARM DDI0487 H.a.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the rvbar property settable after realize. This is done
in preparation to model the ZynqMP's runtime configurable rvbar.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
-----BEGIN PGP SIGNATURE-----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=ix0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging
target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
* target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
* target/arm/translate-neon: Simplify align field check for VLD3
* GICv3 ITS: add more trace events
* GICv3 ITS: implement 8-byte accesses properly
* GICv3: fix minor issues with some trace/log messages
* ui/cocoa: Use the standard about panel
* target/arm: Provide cpu property for controling FEAT_LPA2
* hw/arm/virt: Disable LPA2 for -machine virt-6.2
# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220307:
hw/arm/virt: Disable LPA2 for -machine virt-6.2
target/arm: Provide cpu property for controling FEAT_LPA2
ui/cocoa: Use the standard about panel
hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
hw/intc/arm_gicv3: Fix missing spaces in error log messages
hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
hw/intc/arm_gicv3_its: Add trace events for table reads and writes
hw/intc/arm_gicv3_its: Add trace events for commands
target/arm/translate-neon: Simplify align field check for VLD3
target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
osdep: Move memalign-related functions to their own header
util: Put qemu_vfree() in memalign.c
util: Use meson checks for valloc() and memalign() presence
util: Share qemu_try_memalign() implementation between POSIX and Windows
meson.build: Don't misdetect posix_memalign() on Windows
util: Return valid allocation for qemu_try_memalign() with zero size
util: Unify implementations of qemu_memalign()
util: Make qemu_oom_check() a static function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our current codegen for MVE always calls out to helper functions,
because some byte lanes might be predicated. The common case is that
in fact there is no predication active and all lanes should be
updated together, so we can produce better code by detecting that and
using the TCG generic vector infrastructure.
Add a TB flag that is set when we can guarantee that there is no
active MVE predication, and a bool in the DisasContext. Subsequent
patches will use this flag to generate improved code for some
instructions.
In most cases when the predication state changes we simply end the TB
after that instruction. For the code called from vfp_access_check()
that handles lazy state preservation and creating a new FP context,
we can usually avoid having to try to end the TB because luckily the
new value of the flag following the register changes in those
sequences doesn't depend on any runtime decisions. We do have to end
the TB if the guest has enabled lazy FP state preservation but not
automatic state preservation, but this is an odd corner case that is
not going to be common in real-world code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210913095440.13462-4-peter.maydell@linaro.org
Now that we have working system register sync, we push more target CPU
properties into the virtual machine. That might be useful in some
situations, but is not the typical case that users want.
So let's add a -cpu host option that allows them to explicitly pass all
CPU capabilities of their host CPU into the guest.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210916155404.86958-7-agraf@csgraf.de
[PMM: drop unnecessary #include line from .h file]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Restrict cpu_exec_interrupt() and its callees to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-8-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In v8A, the PSTATE.IL bit is set for various kinds of illegal
exception return or mode-change attempts. We already set PSTATE.IL
(or its AArch32 equivalent CPSR.IL) in all those cases, but we
weren't implementing the part of the behaviour where attempting to
execute an instruction with PSTATE.IL takes an immediate exception
with an appropriate syndrome value.
Add a new TB flags bit tracking PSTATE.IL/CPSR.IL, and generate code
to take an exception instead of whatever the instruction would have
been.
PSTATE.IL and CPSR.IL change only on exception entry, attempted
exception exit, and various AArch32 mode changes via cpsr_write().
These places generally already rebuild the hflags, so the only place
we need an extra rebuild_hflags call is in the illegal-return
codepath of the AArch64 exception_return helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210821195958.41312-2-richard.henderson@linaro.org
Message-Id: <20210817162118.24319-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Added missing returns; set IL bit in syndrome]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags. This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.
Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.
We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway. For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.
This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.
This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org
In v7A, the HSTR register has a TJDBX bit which traps NS EL0/EL1
access to the JOSCR and JMCR trivial Jazelle registers, and also BXJ.
Implement these traps. In v8A this HSTR bit doesn't exist, so don't
trap for v8A CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-3-peter.maydell@linaro.org
In v7, the HSTR register has a TTEE bit which allows EL0/EL1 accesses
to the Thumb2EE TEECR and TEEHBR registers to be trapped to the
hypervisor. Implement these traps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-2-peter.maydell@linaro.org
Allow CPUs that support SVE to specify which SVE vector lengths they
support by setting them in this bitmap. Currently only the 'max' and
'host' CPU types supports SVE and 'host' requires KVM which obtains
its supported bitmap from the host. So, we only need to initialize the
bitmap for 'max' with TCG. And, since 'max' should support all SVE
vector lengths we simply fill the bitmap. Future CPU types may have
less trivial maps though.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike A-profile, for M-profile the UDIV and SDIV insns can be
configured to raise an exception on division by zero, using the CCR
DIV_0_TRP bit.
Implement support for setting this bit by making the helper functions
raise the appropriate exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730151636.17254-3-peter.maydell@linaro.org
Mirror the behavour of /proc/sys/abi/sve_default_vector_length
under the real linux kernel. We have no way of passing along
a real default across exec like the kernel can, but this is a
decent way of adjusting the startup vector length of a process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-4-richard.henderson@linaro.org
[PMM: tweaked docs formatting, document -1 special-case,
added fixup patch from RTH mentioning QEMU's maximum veclen.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note that the SVE BFLOAT16 support does not require SVE2,
it is an independent extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU. Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org
The M-profile FPSCR has an LTPSIZE field, but if MVE is not
implemented it is read-only and always reads as 4; this is how QEMU
currently handles it.
Make the field writable when MVE is implemented.
We can safely add the field to the MVE migration struct because
currently no CPUs enable MVE and so the migration struct is never
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-8-peter.maydell@linaro.org
If MVE is implemented for an M-profile CPU then it has a VPR
register, which tracks predication information.
Implement the read and write handling of this register, and
the migration of its state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-7-peter.maydell@linaro.org
Add the isar feature check functions we will need for v8.1M MVE:
* a check for MVE present: this corresponds to the pseudocode's
CheckDecodeFaults(ExtType_Mve)
* a check for the optional floating-point part of MVE: this
corresponds to CheckDecodeFaults(ExtType_MveFp)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-2-peter.maydell@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-71-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-47-richard.henderson@linaro.org
Message-Id: <20200422165503.13511-1-steplong@quicinc.com>
[rth: Fix indexing in helpers, expand macro to straight functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Will be used for SVE2 isa subset enablement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8.4 adds the mandatory FEAT_TLBIOS. It provides TLBI
maintenance instructions that extend to the Outer Shareable domain.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv8.4 adds the mandatory FEAT_TLBIRANGE. It provides TLBI
maintenance instructions that apply to a range of input addresses.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use this to signal when memory access alignment is required.
This value comes from the CCR register for M-profile, and
from the SCTLR register for A-profile.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that other bits have been moved out of tb->flags,
there's no point in filling from the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that these bits have been moved out of tb->flags,
where TBFLAG_ANY was filling from the top, move AM32
to fill from the top, and A32 and M32 to fill from the
bottom. This means fewer changes when adding new bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have all of the proper macros defined, expanding
the CPUARMTBFlags structure and populating the two TB fields
is relatively simple.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for splitting tb->flags across multiple
fields, introduce a structure to hold the value(s).
So far this only migrates the one uint32_t and fixes
all of the places that require adjustment to match.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to split tbflags into two parts. These macros
will ensure that the correct part is used with the correct
set of bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So PSTATE_SS -> PSTATE__SS in the uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to rearrange the macro expansion surrounding tbflags,
and this field name will be expanded using the bit definition of
the same name, resulting in a token pasting error.
So SCTLR_B -> SCTLR__B in the 3 uses, and document it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add support for FEAT_SSBS. SSBS (Speculative Store Bypass Safe) is an
optional feature in ARMv8.0, and mandatory in ARMv8.5.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2.
Otherwise this does not yet have effect.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the prctl bit that controls whether syscalls accept tagged
addresses. See Documentation/arm64/tagged-address-abi.rst in the
linux kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_DIT. DIT (Data Independent Timing) is a required
feature for ARMv8.4. Since virtual machine execution is largely
nondeterministic and TCG is outside of the security domain, it's
implemented as a NOP.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210208065700.19454-2-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FW and AW bits of SCR_EL3 are RES1 only in some contexts. Force them
to 1 only when there is no support for AArch32 at EL1 or above.
The reset value will be 0x30 only if the CPU is AArch64-only; if there
is support for AArch32 at EL1 or above, it will be reset to 0.
Also adds helper function isar_feature_aa64_aa32_el1 to check if AArch32
is supported at EL1 or above.
Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210203165552.16306-2-michael.nawrocki@gtri.gatech.edu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds handling for the SCR_EL3.EEL2 bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Message-id: 20210112104511.36576-17-remi.denis.courmont@huawei.com
[PMM: Applied fixes for review issues noted by RTH:
- check for FEATURE_AARCH64 before checking sel2 isar feature
- correct the commit message subject line]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
TminLine field in bits [37:32].
Extend the ctr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-4-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds for the Small Translation tables extension in AArch64 state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR. In v8.1M things become significantly more complicated
in two ways:
* there are several new FP system registers; some have side effects
on read, and one (FPCXT_NS) needs to avoid the usual
vfp_access_check() and the "only if FPU implemented" check
* all sysregs are now accessible both by VMRS/VMSR (which
reads/writes a general purpose register) and also by VLDR/VSTR
(which reads/writes them directly to memory)
Refactor the structure of how we handle VMSR/VMRS to cope with this:
* keep the M-profile code entirely separate from the A-profile code
* abstract out the "read or write the general purpose register" part
of the code into a loadfn or storefn function pointer, so we can
reuse it for VLDR/VSTR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org
Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.
Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122913.19561-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Transform the prot bit to a qemu internal page bit, and save
it in the page tables.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
