Commit Graph

162 Commits

Author SHA1 Message Date
Vijaya Kumar K
d3a3e52962 target-arm: Add GICv3CPUState in CPUARMState struct
Add gicv3state void pointer to CPUARMState struct
to store GICv3CPUState.

In case of usecase like CPU reset, we need to reset
GICv3CPUState of the CPU. In such scenario, this pointer
becomes handy.

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 17:10:00 +00:00
Peter Maydell
e13886e3a7 armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set.  We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell
aa488fe3bb armv7m: Check exception return consistency
Implement the exception return consistency checks
described in the v7M pseudocode ExceptionReturn().

Inspired by a patch from Michael Davidsaver's series, but
this is a reimplementation from scratch based on the
ARM ARM pseudocode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell
39ae2474e3 armv7m: Extract "exception taken" code into functions
Extract the code from the tail end of arm_v7m_do_interrupt() which
enters the exception handler into a pair of utility functions
v7m_exception_taken() and v7m_push_stack(), which correspond roughly
to the pseudocode PushStack() and ExceptionTaken().

This also requires us to move the arm_v7m_load_vector() utility
routine up so we can call it.

Handling illegal exception returns has some cases where we want to
take a UsageFault either on an existing stack frame or with a new
stack frame but with a specific LR value, so we want to be able to
call these without having to go via arm_v7m_cpu_do_interrupt().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver
a25dc805e2 armv7m: Simpler and faster exception start
All the places in armv7m_cpu_do_interrupt() which pend an
exception in the NVIC are doing so for synchronous
exceptions. We know that we will always take some
exception in this case, so we can just acknowledge it
immediately, rather than returning and then immediately
being called again because the NVIC has raised its outbound
IRQ line.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: tweaked commit message; added DEBUG to the set of
exceptions we handle immediately, since it is synchronous
when it results from the BKPT instruction]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Peter Maydell
a5d8235545 armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver
a73c98e159 armv7m: Escalate exceptions to HardFault if necessary
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Peter Maydell
7ecdaa4a96 armv7m: Fix condition check for taking exceptions
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile.  The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.

[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Nick Reilly
a4f5c5b723 Add missing fp_access_check() to aarch64 crypto instructions
The aarch64 crypto instructions for AES and SHA are missing the
check for if the FPU is enabled.

Signed-off-by: Nick Reilly <nreilly@blackberry.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 12:08:15 +00:00
Alex Bennée
ca759f9e38 tcg: enable MTTCG by default for ARM on x86 hosts
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:

  - The ARM translate.c/translate-64.c have been converted to
    - use MTTCG safe atomic primitives
    - emit the appropriate barrier ops
  - The ARM machine has been updated to
    - hold the BQL when modifying shared cross-vCPU state
    - defer powerctl changes to async safe work

All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-02-24 10:32:46 +00:00
Alex Bennée
a67cf27727 target-arm: ensure all cross vCPUs TLB flushes complete
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.

To solve this we call the cputlb *_all_cpus_synced() functions to do
the flushes which ensures all flushes are completed by the time the
vCPU next schedules its own work. As the TLB instructions are modelled
as CP writes the TB ends at this point meaning cpu->exit_request will
be checked before the next instruction is executed.

Deferring the work until the architectural sync point is a possible
future optimisation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée
c22edfebff target-arm: don't generate WFE/YIELD calls for MTTCG
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée
062ba099e0 target-arm/powerctl: defer cpu reset work to CPU context
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.

This avoids potential races in MTTCG system emulation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée
0336cbf853 cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmap
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.

For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:

    tlb_flush_page_by_mmuidx(other_cs, pageaddr,
                             (1 << ARMMMUIdx_S1SE1) |
                             (1 << ARMMMUIdx_S1SE0));

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Jan Kiszka
8d04fb55de tcg: drop global lock during TCG code execution
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.

We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.

Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:

20338 jan       20   0  331m  75m 6904 R   99  0.9   0:50.95 qemu-system-arm
20337 jan       20   0  331m  75m 6904 S   20  0.9   0:26.50 qemu-system-arm

The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond

32206 jan       20   0  330m  73m 7036 R   82  0.9   1:06.00 qemu-system-arm
32204 jan       20   0  330m  73m 7036 S   21  0.9   0:17.03 qemu-system-arm

We don't benefit significantly, though, when the guest is not fully
loading a host CPU.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:45 +00:00
Wei Huang
d6f02ce3b8 target-arm: Enable vPMU support under TCG mode
This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang
e6ec54571e target-arm: Add support for PMU register PMINTENSET_EL1
This patch adds access support for PMINTENSET_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang
fdb8665672 target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
In order to support Linux perf, which uses PMXEVTYPER register,
this patch adds read/write access support for PMXEVTYPER. The access
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
this patch adds support for PMXEVTYPER_EL0.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang
6b0407805d target-arm: Add support for PMU register PMSELR_EL0
This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Peter Maydell
9bb6558a21 target/arm: A32, T32: Create Instruction Syndromes for Data Aborts
Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.

This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954d4.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:30:00 +00:00
Peter Maydell
63f26fcfda target/arm: Abstract out pbit/wbit tests in ARM ldr/str decode
In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:29:59 +00:00
Julian Brown
4061200059 arm: Correctly handle watchpoints for BE32 CPUs
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers.  This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.

This version of the patch augments and tidies up comments a little.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown
f7478a92dd Fix Thumb-1 BE32 execution and disassembly.
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.

This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown
3a062d5730 target/arm: Add cfgend parameter for ARM CPU selection.
Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not.  This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
 move the integratorcp changes to their own patch;
 drop an unnecessary extra #include;
 rephrase commit message accordingly;
 move setting of reset_sctlr above registration of cpregs
 so it actually has an effect]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Michael S. Tsirkin
1b28762a33 arm: add trailing ; after MISMATCH_CHECK
Macro calls without a trailing ; look weird in C, this works as a side
effect of how QEMU_BUILD_BUG_ON is implemented. Fix this up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Michael S. Tsirkin
705ae59fec arm: better stub version for MISMATCH_CHECK
stub version of MISMATCH_CHECK is empty so it's easy to misuse for
people not building kvm on arm.  Use QEMU_BUILD_BUG_ON similar to the
non-stub version to make it easier to catch bugs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Peter Maydell
056f43df91 armv7m: R14 should reset to 0xffffffff
For M profile (unlike A profile) the reset value of R14 is specified
as 0xffffffff.  (The rationale is that this is an illegal exception
return value, so if guest code tries to return to it it will result
in a helpful exception.)

Registers r0 to r12 and the flags are architecturally UNKNOWN on
reset, so we leave those at zero.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-11-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver
dc7abe4d65 armv7m: FAULTMASK should be 0 on reset
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK.
QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the
I bit) we have to clear these to undo the A profile default of 1.

Update the comment accordingly and move it so that it's closer to the
code it's referring to.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-10-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message, moved comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Peter Maydell
7517748e3f armv7m: Report no-coprocessor faults correctly
For v7M attempts to access a nonexistent coprocessor are reported
differently from plain undefined instructions (as UsageFaults of type
NOCP rather than type UNDEFINSTR).  Split them out into a new
EXCP_NOCP so we can report the FSR value correctly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-8-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver
81dd9648c6 armv7m: set CFSR.UNDEFINSTR on undefined instructions
When we take an exception for an undefined instruction, set the
appropriate CFSR bit.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-7-git-send-email-peter.maydell@linaro.org
[PMM: tweaked commit message, comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Michael Davidsaver
dc858c6633 armv7m: honour CCR.STACKALIGN on exception entry
The CCR.STACKALIGN bit controls whether the CPU is supposed to force
8-alignment of the stack pointer on entry to the exception handler.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Message-id: 1485285380-10565-6-git-send-email-peter.maydell@linaro.org
[PMM: commit message and comment tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00
Peter Maydell
2c4da50d94 armv7m: add state for v7M CCR, CFSR, HFSR, DFSR, MMFAR, BFAR
Add the structure fields, VMState fields, reset code and macros for
the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and
BFAR.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-4-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Peter Maydell
531c60a97a target/arm: Drop IS_M() macro
We only use the IS_M() macro in two places, and it's a bit of a
namespace grab to put in cpu.h.  Drop it in favour of just explicitly
calling arm_feature() in the places where it was used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-2-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver
a20ee60055 armv7m: Clear FAULTMASK on return from non-NMI exceptions
FAULTMASK must be cleared on return from all
exceptions other than NMI.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-7-git-send-email-peter.maydell@linaro.org
2017-01-27 15:20:22 +00:00
Michael Davidsaver
abc24d86cc armv7m: Fix reads of CONTROL register bit 1
The v7m CONTROL register bit 1 is SPSEL, which indicates
the stack being used. We were storing this information
not in v7m.control but in the separate v7m.other_sp
structure field. Unfortunately, the code handling reads
of the CONTROL register didn't take account of this, and
so if SPSEL was updated by an exception entry or exit then
a subsequent guest read of CONTROL would get the wrong value.

Using a separate structure field doesn't really gain us
anything in efficiency, so drop this unnecessary complexity
in favour of simply storing all the bits in v7m.control.

This is a migration compatibility break for M profile
CPUs only.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-6-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message;
 use deposit32(); use FIELD to define constants for
 masking and shifting of CONTROL register fields
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver
1b9ea408fc armv7m: Explicit error for bad vector table
Give an explicit error and abort when a load
from the vector table fails. Architecturally this
should HardFault (which will then immediately
fail to load the HardFault vector and go into Lockup).
Since we don't model Lockup, just report this guest
error via cpu_abort(). This is more helpful than the
previous behaviour of reading a zero, which is the
address of the reset stack pointer and not a sensible
location to jump to.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-4-git-send-email-peter.maydell@linaro.org
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver
542b3478a0 armv7m: Replace armv7m.hack with unassigned_access handler
For v7m we need to catch attempts to execute from special
addresses at 0xfffffff0 and above. Previously we did this
with the aid of a hacky special purpose lump of memory
in the address space and a check in translate.c for whether
we were translating code at those addresses.

We can implement this more cleanly using a CPU
unassigned access handler which throws the exception
if the unassigned access is for one of the special addresses.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-3-git-send-email-peter.maydell@linaro.org
[PMM:
 * drop the deletion of the "don't interrupt if PC is magic"
   code in arm_v7m_cpu_exec_interrupt() -- this is still
   required
 * don't generate an exception for unassigned accesses
   which aren't to the magic address -- although doing
   this is in theory correct in practice it will break
   currently working guests which rely on the RAZ/WI
   behaviour when they touch devices which we haven't
   modelled.
 * trigger EXCP_EXCEPTION_EXIT on is_exec, not !is_write
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:21 +00:00
Michael Davidsaver
58117c9bb4 armv7m: MRS/MSR: handle unprivileged access
The MRS and MSR instruction handling has a number of flaws:
 * unprivileged accesses should only be able to read
   CONTROL and the xPSR subfields, and only write APSR
   (others RAZ/WI)
 * privileged access should not be able to write xPSR
   subfields other than APSR
 * accesses to unimplemented registers should log as
   guest errors, not abort QEMU

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484937883-1068-2-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:20:20 +00:00
Jianjun Duan
2c21ee769e migration: extend VMStateInfo
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Peter Maydell
598cf1c805 * QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
 * Memory leak fixes (Li Qiang, me)
 * Ctrl-a b regression (Marc-André)
 * Stubs cleanups and fixes (Leif, me)
 * hxtool tweak (me)
 * HAX support (Vincent)
 * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
 * PC_COMPAT_2_8 fix (Marcelo)
 * stronger bitmap assertions (Peter)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQExBAABCAAbBQJYggc9FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
 5pMH/092iVHw1la8VmphQd8W7hkCHckvVbwaEJ+n4BP8MjeUNmYFJX+op9Qlpqfe
 ekYqQgK69v2UwuofVK2gqS+Y2EyFHivTESk5pS3SM3lTewV1fzCM/HVG3pTxV/ol
 V+eBnp+shrfNG3Eg7YThTqx4LkDUp24Pd3HJVblQZMVpqGzL2xUuUQzSf8F/eeQJ
 xO61pm0ovpCY5MCg3kPLx8GIkPAmcXo5jhMCTz5aLnQW6TO/mwx271a4UE2RTLZ7
 cFjNhxdGSzlnn2RwId4HVYWGU42taW6mpa8NX1hVVUXa1A2qlAfi5N/WLaH0aGYR
 J5ZTIaXdPUBx2SrUmd8udj4a818=
 =H5BQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QOM interface fix (Eduardo)
* RTC fixes (Gaohuai, Igor)
* Memory leak fixes (Li Qiang, me)
* Ctrl-a b regression (Marc-André)
* Stubs cleanups and fixes (Leif, me)
* hxtool tweak (me)
* HAX support (Vincent)
* QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me)
* PC_COMPAT_2_8 fix (Marcelo)
* stronger bitmap assertions (Peter)

# gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (35 commits)
  pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8
  bitmap: assert that start and nr are non negative
  Revert "win32: don't run subprocess tests on Mingw32 platform"
  hax: add Darwin support
  Plumb the HAXM-based hardware acceleration support
  target/i386: Add Intel HAX files
  kvm: move cpu synchronization code
  KVM: PPC: eliminate unnecessary duplicate constants
  ramblock-notifier: new
  char: fix ctrl-a b not working
  exec: Add missing rcu_read_unlock
  x86: ioapic: fix fail migration when irqchip=split
  x86: ioapic: dump version for "info ioapic"
  x86: ioapic: add traces for ioapic
  hxtool: emit Texinfo headings as @subsection
  qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create()
  serial: fix memory leak in serial exit
  scsi-block: fix direction of BYTCHK test for VERIFY commands
  pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged
  acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
  ...

# Conflicts:
#	include/hw/i386/pc.h
2017-01-20 16:42:07 +00:00
Peter Maydell
c25bd18a04 target-arm: Enable EL2 feature bit on A53 and A57
Enable the ARM_FEATURE_EL2 bit on Cortex-A52 and
Cortex-A57, since this is all now sufficiently implemented
to work with the GICv3. We provide the usual CPU property
to disable it for backwards compatibility with the older
virt boards.

In this commit, we disable the EL2 feature on the
virt and ZynpMP boards, so there is no overall effect.
Another commit will expose a board-level property to
allow the user to enable EL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-18-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:10 +00:00
Peter Maydell
3f591a2022 target/arm/psci.c: If EL2 implemented, start CPUs in EL2
The PSCI spec states that a CPU_ON call should cause the new
CPU to be started in the highest implemented Non-secure
exception level. We were incorrectly starting it at the
exception level of the caller, which happens to be correct
if EL2 is not implemented. Implement the correct logic
as described in the PSCI 1.0 spec section 6.4:
 * if EL2 exists and SCR_EL3.HCE is set: start in EL2
 * otherwise start in EL1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Message-id: 1483977924-14522-17-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:10 +00:00
Peter Maydell
e45868a3f3 target-arm: Add ARMCPU fields for GIC CPU i/f config
Add fields to the ARMCPU structure to allow CPU classes to
specify the configurable aspects of their GIC CPU interface.
In particular, the virtualization support allows different
values for number of list registers, priority bits and
preemption bits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-6-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:09 +00:00
Peter Maydell
aa1b3111b3 target-arm: Expose output GPIO line for VCPU maintenance interrupt
The GICv3 support for virtualization includes an outbound
maintenance interrupt signal which is asserted when the
CPU interface wants to signal to the hypervisor that it
needs attention. Expose this as an outbound GPIO line from
the CPU object which can be wired up as a physical interrupt
line by the board code (as we do already for the CPU timers).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-4-git-send-email-peter.maydell@linaro.org
2017-01-20 11:15:09 +00:00
Peter Maydell
4d2ec4da1c target/arm: Implement DBGVCR32_EL2 system register
The DBGVCR_EL2 system register is needed to run a 32-bit
EL1 guest under a Linux EL2 64-bit hypervisor. Its only
purpose is to provide AArch64 with access to the state of
the DBGVCR AArch32 register. Since we only have a dummy
DBGVCR, implement a corresponding dummy DBGVCR32_EL2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-01-20 11:15:07 +00:00
Peter Maydell
87a4b27034 target/arm: Handle VIRQ and VFIQ in arm_cpu_do_interrupt_aarch32()
To run a VM in 32-bit EL1 our AArch32 interrupt handling code
needs to be able to cope with VIRQ and VFIQ exceptions.
These behave like IRQ and FIQ except that we don't need to try
to route them to Monitor mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-01-20 11:15:07 +00:00
Vincent Palatin
b39466269b kvm: move cpu synchronization code
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-19 22:07:46 +01:00
Peter Maydell
a8c611e113 This is the same as the v3 posted except a re-base and a few extra signoffs
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYeOOmAAoJEPvQ2wlanipE3ZUH/Rsfpl23kXCMmqoXEIhWXy+h
 yf8ARWCmpU6UKfwb+sH4vLegBfU56f62vVkGQ6oaaAbuyQ4SxCUlZGMO/rqY8/TE
 m57aM+VfEE+bIdinAtLjFM24EVp/exMfkeutK7ItzLv7GwlrBos0J5veyCuyJ15q
 pccV24jrpbJGilEeJ2GblKp3r2I3dInQGauOQhtoP3MNjHmYNSQD7noSbdN/JiTR
 9H2eV700pg3ZPaSfO+CTVQN+cHjK1FC6qLi6916YZY9llnSOnDAegBYgbwE1RIBw
 AULpWrezYveKy71eFhHVtGxnPeCJ8J4GVECMK0P0cdxzprIXFh1kZezyM4bxAGk=
 =sboI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1' into staging

This is the same as the v3 posted except a re-base and a few extra signoffs

# gpg: Signature made Fri 13 Jan 2017 14:26:46 GMT
# gpg:                using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1:
  cputlb: drop flush_global flag from tlb_flush
  cpu_common_reset: wrap TCG specific code in tcg_enabled()
  qom/cpu: move tlb_flush to cpu_common_reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-16 18:23:02 +00:00
Richard Henderson
86c9ab2776 target/arm: Fix ubfx et al for aarch64
The patch in 59a71b4c5b suffered from a merge failure
when compared to the original patch in

  http://lists.nongnu.org/archive/html/qemu-devel/2016-12/msg00137.html

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-13 09:48:20 -08:00
Peter Maydell
b6af8ea602 x86 and machine queue, 2017-01-17
Includes i386, CPU, NUMA, and memory backends changes.
 
 i386:
  target/i386: Fix bad patch application to translate.c
 
 CPU:
  qmp: Report QOM type name on query-cpu-definitions
 
 NUMA:
  numa: make -numa parser dynamically allocate CPUs masks
 
 Memory backends:
  qom: remove unused header
  monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
  monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYd8KHAAoJECgHk2+YTcWmHL4QALOeGD9hts4xw+1Q/kIzZYKt
 4fDdhGxyZ5faOiSUL8F2bOMXcOCsH+oNgvapxyKsZw1z79VbdEHgSUJtgv89Dz58
 sZ6UA1YAg2cWVaKFbRm98qGOImHmPEyNS/C7EpkejB41TXWAXM6Oh4PYeYgaibi3
 HxHW+oi7/4ugAs0dnIihaE/kMQmO4qWTtuDGosTPkTl4XuwWeMbC2BXaYIyZKAS5
 F2MgEXbxph889PcsNMeE5xy5hw3CA34gpq+Xs+ai+Box7AjIGemZVgqHdYcSjMSI
 pmaLO8R1ciyzPfjgwojOkVzFIft1A5XyoAiWUTmR0o3KQLs0gmG7XkKpjId2UzTk
 Xl2mxQjWAxZNlbfOoNYRf6UhwAIjpKYrjYyr0nrrumXB+9YH1d/0ix+3UjtZLU+e
 Qgg+sSgv11MPpdc9t1gcvXVzB+h+eqp7WLYH3j5vdYJZwLVVJJusXJxmyy72BrdK
 2AdL14RziPYvVvlQZ4fM5wp1HtTMUe96VLhHxwOpBDcdcdZIk1E8SxZXde1fUk41
 OS+egry27xgoJ6pJMZlB8t4TKqcSj8x5dNLi9+qjtfDSRonPAROCBus4jugUd6Ds
 xeW06s7Hbm0BxGYn/3s860RPTJrJPX3+MjLtFbIdXSbwHWM6jsy4U9qQdLRlneR9
 oTCyWo0AeuDFe0bQ110m
 =KII3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue, 2017-01-17

Includes i386, CPU, NUMA, and memory backends changes.

i386:
 target/i386: Fix bad patch application to translate.c

CPU:
 qmp: Report QOM type name on query-cpu-definitions

NUMA:
 numa: make -numa parser dynamically allocate CPUs masks

Memory backends:
 qom: remove unused header
 monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
 monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends

# gpg: Signature made Thu 12 Jan 2017 17:53:11 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-and-machine-pull-request:
  qmp: Report QOM type name on query-cpu-definitions
  numa: make -numa parser dynamically allocate CPUs masks
  target/i386: Fix bad patch application to translate.c
  monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends
  monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
  qom: remove unused header

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-13 14:38:21 +00:00
Alex Bennée
d10eb08f5d cputlb: drop flush_global flag from tlb_flush
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:37 +00:00
Alex Bennée
1f5c00cfdb qom/cpu: move tlb_flush to cpu_common_reset
It is a common thing amongst the various cpu reset functions want to
flush the SoftMMU's TLB entries. This is done either by calling
tlb_flush directly or by way of a general memset of the CPU
structure (sometimes both).

This moves the tlb_flush call to the common reset function and
additionally ensures it is only done for the CONFIG_SOFTMMU case and
when tcg is enabled.

In some target cases we add an empty end_of_reset_fields structure to the
target vCPU structure so have a clear end point for any memset which
is resetting value in the structure before CPU_COMMON (where the TLB
structures are).

While this is a nice clean-up in general it is also a precursor for
changes coming to cputlb for MTTCG where the clearing of entries
can't be done arbitrarily across vCPUs. Currently the cpu_reset
function is usually called from the context of another vCPU as the
architectural power up sequence is run. By using the cputlb API
functions we can ensure the right behaviour in the future.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:31 +00:00
Eduardo Habkost
8ed877b784 qmp: Report QOM type name on query-cpu-definitions
The new typename attribute on query-cpu-definitions will be used
to help management software use device-list-properties to check
which properties can be set using -cpu or -global for the CPU
model.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1479320499-29818-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12 15:51:36 -02:00
Richard Henderson
bc21dbcc12 target-arm: Use clrsb helper
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:47:48 -08:00
Richard Henderson
7539a012f6 target-arm: Use clz opcode
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Richard Henderson
59a71b4c5b target-arm: Use new deposit and extract ops
Use the new primitives for UBFX and SBFX.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:10 -08:00
Cédric Le Goater
91db4642f8 target-arm: Add VBAR support to ARM1176 CPUs
ARM1176 CPUs have TrustZone support and can use the Vector Base
Address Register, but currently, qemu only adds VBAR support to ARMv7
CPUs. Fix this by adding a new feature ARM_FEATURE_VBAR which can used
for ARMv7 and ARM1176 CPUs.

The VBAR feature is always set for ARMv7 because some legacy boards
require it even if this is not architecturally correct.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1481810970-9692-1-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:30 +00:00
Peter Maydell
c9b61d9aa1 target-arm: Log AArch64 exception returns
We already log exception entry; add logging of the AArch64 exception
return path as well.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27 14:59:25 +00:00
Richard Henderson
0a97c40f8e target-arm: Fix aarch64 disas_ldst_single_struct
We add s->be_data within do_vec_ld/st.  Adding it here means that
we have the wrong bits set in SIZE for a big-endian host, leading
to g_assert_not_reached in write_vec_element and read_vec_element.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:24 +00:00
Richard Henderson
416d72b97b target-arm: Fix aarch64 vec_reg_offset
Since CPUARMState.vfp.regs is not 16 byte aligned, the ^ 8 fixup used
for a big-endian host doesn't do what's intended.  Fix this by adding
in the vfp.regs offset after computing the inter-register offset.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-2-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:24 +00:00
Julian Brown
0f1944735b Correct value of ARM Cortex-A8 MVFR1 register.
The value of the MVFR1 (Media and VFP Feature Register 1) register for
the Cortex-A8 appears to be incorrect (according to the TRM, DDI0344K),
with the "full denormal arithmetic" and "propagation of NaN" fields
holding both 0 instead of both 1.

I had a go tracing the history of the use of this value, and it seems
it's always just been wrong in QEMU: maybe it was derived from early
documentation, or guessed based on the use of a "VFP Lite" implementation
in the Cortex-A8.

Depending on the startup/early-boot code in use, this can manifest as
failure to perform denormal arithmetic properly: in our case, selecting
a Cortex-A8 CPU when using QEMU as an instruction-set simulator for
bare-metal GCC testing caused tests using denormal arithmetic to
fail. Problems might be masked (or not occur) when using a full OS kernel
with suitable trap handlers (I'm not sure).

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 1481130858-31767-1-git-send-email-julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27 14:59:23 +00:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00