commit 5ec01c2e96 broke "-cpu ..,enforce",
as it has moved kvm_check_features_against_host() after the
filter_features_for_kvm() call. filter_features_for_kvm() removes all
features not supported by the host, so this effectively made
kvm_check_features_against_host() impossible to fail.
This patch changes the call so we check for host feature support before
filtering the feature bits.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1364935692-24004-1-git-send-email-ehabkost@redhat.com
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
valids can equals to -1 if the reg/mem string is empty. Change the
expression to have an empty xor mask in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The inner loop should only change the current bit of the result, instead
of the whole result.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pcmpXstrX instructions in "Equal each" mode force both invalid element
pair to true. It means (upper - MAX(valids, validd)) bits should be set
to 1, not (upper - MAX(valids, validd) + 1).
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the order of the of the comparisons to match the "Intel 64 and
IA-32 Architectures Software Developer's Manual".
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pcmpXstrm instructions returns their result in the XMM0 register and
not in the first operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ffs1 returns the first bit set to one starting counting from the most
significant bit.
pcmpXstri returns the most significant bit set to one, starting counting
from the least significant bit.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The "Intel 64 and IA-32 Architectures Software Developer's Manual" (at
least recent versions) clearly says that the comparison is signed.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
gen_op_mov_TN_reg() loads the value in cpu_T[0], so this temporary should
be used instead of cpu_tmp0.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We can compute the value in cpu_dump_state anyway, and gratuitous
modifications to eflags creates heisenbugs.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When starting from CC_OP_DYNAMIC, and issuing adox before adcx,
a typo used the wrong value for the resulting CC_OP.
Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: Torbjorn Granlund <tg@gmplib.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRL1gUAAoJECgfDbjSjVRpIk4IAL17zSadWgd99ZrH6EtZ3/cw
mhuxgm+vRfZPHl82lGC/NthLrTbJ5hpVe1Ff9vrMIkx3OZsh97iqoXS4iPjo9804
Pb5zhDqHJQJDTQKCllb9seu6e5D9Fw3aPp+BcH5QfyEOc/X5l0c5IffRdo6xDT9G
1dDEywntl/wwfCej/kVBu4H7G2/bF7wEMvda7kvBPzZsc6y0TsDSAewk5EX54+/p
wRKw8IBa/T2/ldSoBcqPW1Zd2oeuvKhty4vrXlO1UVZi+uTWNmJxUm6Z1GqNInvE
im0FGlSxwTJF7nX3JQv6tB46GRL8V/IC5+9I5UJc5nT8ScrX4rIxRbJTnsRkn4Y=
=eUQN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,vhost,pci,e1000
Mostly bugfixes, but also some ICH work by Laszlo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 28 Feb 2013 07:13:56 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Set virtio-serial device to have a default of 2 MSI vectors.
ICH9 LPC: Reset Control Register, basic implementation
Fix guest OS hang when 64bit PCI bar present
e1000: unbreak the guest network migration to 1.3
vhost: memory sync fixes
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce ENV_OFFSET macros which can be used in non-target-specific
code that needs to generate TCG instructions which reference CPUState
fields given the cpu_env register that TCG targets set up with a
pointer to the CPUArchState struct.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These correspond very closely to the insns that we're emulating.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch addresses the issue fully described here:
http://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg01804.html
Linux kernels prior to 2.6.36 do not disable the PCI device during
enumeration process. Since lower and higher parts of a 64bit BAR
are programmed separately this leads to qemu receiving a request to occupy
a completely wrong address region for a short period of time.
We have found that the boot process screws up completely if kvm-apic range
is overlapped even for a short period of time (it is fine for other
regions though).
This patch raises the priority of the kvm-apic memory region, so it is
never pushed out by PCI devices. The patch is quite safe as it does not
touch memory manager.
Signed-off-by: Alexey Korolev <akorolex@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The shift and rotate insns use movcond to set CC_OP, and thus
achieve a conditional EFLAGS setting. By discarding CC_OP in
a later flags setting insn, we can discard that movcond.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We weren't computing flags for lzcnt at all. At the same time,
adjust the implementation of bsf/bsr to avoid the local branch,
using movcond instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
As this is the first of the BMI insns to be implemented,
this carries quite a bit more baggage than normal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add another slot in ENV and store two of the three inputs. This lets us
do less work when carry-out is not needed, and avoids the unpredictable
CC_OP after translating these insns.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Pass the data in explicitly, rather than indirectly via env.
This avoids all sorts of unnecessary register spillage.
Signed-off-by: Richard Henderson <rth@twiddle.net>
In preparation for making this a const helper.
By using the proper types in the parameters to the helper functions,
we get to avoid quite a lot of subsequent casting.
Signed-off-by: Richard Henderson <rth@twiddle.net>
After a comparison or subtraction, the original value of the LHS will
currently be reconstructed using an addition. However, in most cases
it is already available: store it in a temp-local variable and save 1
or 2 TCG ops (2 if the result of the addition needs to be extended).
The temp-local can be declared dead as soon as the cc_op changes again,
or also before the translation block ends because gen_prepare_cc will
always make a copy before returning it. All this magic, plus copy
propagation and dead-code elimination, ensures that the temp local will
(almost) never be spilled.
Example (cmp $0x21,%rax + jbe):
Before After
----------------------------------------------------------------------------
movi_i64 tmp1,$0x21 movi_i64 tmp1,$0x21
movi_i64 cc_src,$0x21 movi_i64 cc_src,$0x21
sub_i64 cc_dst,rax,tmp1 sub_i64 cc_dst,rax,tmp1
add_i64 tmp7,cc_dst,cc_src
movi_i32 cc_op,$0x11 movi_i32 cc_op,$0x11
brcond_i64 tmp7,cc_src,leu,$0x0 discard loc11
brcond_i64 rax,cc_src,leu,$0x0
Before After
----------------------------------------------------------------------------
mov (%r14),%rbp mov (%r14),%rbp
mov %rbp,%rbx mov %rbp,%rbx
sub $0x21,%rbx sub $0x21,%rbx
lea 0x21(%rbx),%r12
movl $0x11,0xa0(%r14) movl $0x11,0xa0(%r14)
movq $0x21,0x90(%r14) movq $0x21,0x90(%r14)
mov %rbx,0x98(%r14) mov %rbx,0x98(%r14)
cmp $0x21,%r12 | cmp $0x21,%rbp
jbe ... jbe ...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Placing the CC_OP_DYNAMIC at the join is less effective than
before the branch, as the branch will have forced global registers
to their home locations. This way we have a chance to discard
CC_SRC2 before it gets stored.
Signed-off-by: Richard Henderson <rth@twiddle.net>
A jump that ends a basic block or otherwise falls back to CC_OP_DYNAMIC
will always have to call gen_op_set_cc_op. However, not all jumps end
a basic block, so introduce a variant that does not do this.
This was partially undone earlier (i386: drop cc_op argument of gen_jcc1),
redo it now also to prepare for the introduction of src2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace low-level ops with a higher-level "cmp %al, (A0)" in the case
of scas, and "cmp T0, (A0)" in the case of cmps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It is almost unused, and it is simpler to pass a TCG value directly
to gen_shiftd_rm_T1_T3. This value is then written to t2 without
going through a temporary register.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This simplifies all the jump generation code. CCPrepare allows the
code to create an efficient brcond always, so there is no need to
duplicate the setcc and jcc code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This makes the i386 front-end able to create CCPrepare structs for all
condition, not just those that come from a single flag. In particular,
JCC_L and JCC_LE can be optimized because gen_prepare_cc is not forced
to return a result in bit 0 (unlike gen_setcc_slow).
However, for now the slow jcc operations will still go through CC
computation in a single-bit temporary, followed by a brcond if the
temporary is nonzero.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce a struct that describes how to build a *cond operation
that checks for a given x86 condition code. For now, just change
gen_compute_eflags_* to return the new struct, generate code for
the CCPrepare struct, and go on as before.
[rth: Use ctz with the proper width rather than ffs.]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reconstruct the arguments for complex conditions involving CC_OP_SUBx (BE,
L, LE). In the others do it via setcond and gen_setcc_slow (which is
not that slow in many cases).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And allow gen_setcc_slow to operate on cpu_cc_src.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is looking at EFLAGS, but it can do so more efficiently with
setcond.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Do not hard code the destination register.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Do the switch at translation time, converting the helper templates to
TCG opcodes. In some cases CF can be computed with a single setcond,
though others it may require a little more work.
In the CC_OP_DYNAMIC case, compute the whole EFLAGS, same as for ZF/SF/PF.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Make gen_compute_eflags_z and gen_compute_eflags_s able to compute the
inverted condition, and use this in gen_setcc_slow_T0. We cannot do it
yet in gen_compute_eflags_c, but prepare the code for it anyway. It is
not worthwhile for PF, as usual.
shr+and+xor could be replaced by and+setcond. I'm not doing it yet.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
ZF, SF and PF can always be computed from CC_DST except in the
CC_OP_EFLAGS case (and CC_OP_DYNAMIC, which just resolves to CC_OP_EFLAGS
in gen_compute_eflags). Use setcond to compute ZF and SF.
We could also use a table lookup to compute PF.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This gets us universal coverage, rather than scattering discards
around at various places. As a bonus, we do not emit redundant
discards e.g. between sequential logic insns.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This makes code more similar to the other callers of gen_eob, especially
loopz/loopnz/jcxz.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
After calling gen_compute_eflags, leave the computed value in cc_reg_src
and set cc_op to CC_OP_EFLAGS. The next few patches will remove anyway
most calls to gen_compute_eflags.
As a result of this change it is more natural to remove the register
argument from gen_compute_eflags and change all the callers.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce new functions to extract PF, SF, OF, ZF in addition to CF.
These provide single entry points for optimizing accesses to a single
flag.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All of the conditional calls to gen_op_set_cc_op go away, and
gen_op_set_cc_op itself gets inlined into its only remaining caller.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use a dirty flag to know whether env->cc_op is up to date,
rather than forcing s->cc_op to DYNAMIC and losing info.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Before computing flags we need to store the cc_op to memory. Move this
to gen_compute_eflags_c and gen_compute_eflags rather than doing it all
over the place.
Alo, after computing the flags in cpu_cc_src we are in EFLAGS mode.
Set s->cc_op and discard cpu_cc_dst in gen_compute_eflags, rather than
doing it all over the place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Discard CC_DST and set s->cc_op immediately after computing EFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always compute EFLAGS first since it is needed whenever
the shift is non-zero, i.e. most of the time. This makes it possible
to remove some writes of CC_OP_EFLAGS to cpu_cc_op and more importantly
removes cases where s->cc_op becomes CC_OP_DYNAMIC. Also, we can
remove cc_tmp and just modify cc_src from within the helper.
Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers. The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.
Always compute EFLAGS first since it is needed whenever the shift is
non-zero, i.e. most of the time. This makes it possible to remove some
writes of CC_OP_EFLAGS to cpu_cc_op and more importantly removes cases
where s->cc_op becomes CC_OP_DYNAMIC. These are slow and we want to
avoid them: CC_OP_EFLAGS is quite efficient once we paid the initial
cost of computing the flags.
Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers. The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As in the gen_repz_scas/gen_repz_cmps case, delay setting
CC_OP_DYNAMIC in gen_jcc until after code generation. All of
gen_jcc1/is_fast_jcc/gen_setcc_slow_T0 now work on s->cc_op, which makes
things a bit easier to follow and to patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Set it to the appropriate CC_OP_SUBx constant in gen_scas/gen_cmps.
In the repz case it can be overridden to CC_OP_DYNAMIC after generating
the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce a function that abstracts extracting an 8, 16, 32 or 64-bit value
with or without sign, generalizing gen_extu and gen_exts.
Reviewed-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In order to instantiate a CPU subtype we will need to know which type,
so move the cpu_model splitting into cpu_x86_init().
Parameters need to be set on the X86CPU instance, so move
cpu_x86_parse_featurestr() into cpu_x86_init() as well.
This leaves cpu_x86_register() operating on the model name only.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Consolidate CPU functions in cpu.c.
Allows to make cpu_x86_register() static.
No functional changes.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adapt the signature of x86_cpu_realize(), hook up to
DeviceClass::realize and set realized = true in cpu_x86_init().
The QOM realizefn cannot depend on errp being non-NULL as in
cpu_x86_init(), so use a local Error to preserve error handling behavior
on APIC initialization errors.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Invoke parent's realizefn]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use clz32 directly. Which makes slightly more sense given
that the input is type "int" and not type "long".
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
CPUs are never added to the composition tree, so delete is achieved
simply by removing the last references to them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prepares for cpu_interrupt() changing argument to CPUState.
While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
* qemu-kvm/uq/master:
target-i386: kvm: prevent buffer overflow if -cpu foo, [x]level is too big
vmxcap: bit 9 of VMX_PROCBASED_CTLS2 is 'virtual interrupt delivery'
Conflicts:
target-i386/kvm.c
Trivial merge resolution due to lack of context.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stack corruption may occur if too big 'level' or 'xlevel' values passed
on command line with KVM enabled, due to limited size of cpuid_data
in kvm_arch_init_vcpu().
reproduces with:
qemu -enable-kvm -cpu qemu64,level=4294967295
or
qemu -enable-kvm -cpu qemu64,xlevel=4294967295
Check if there is space in cpuid_data before passing it to cpu_x86_cpuid()
or abort() if there is not space.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Setting tsc-frequency from x86_def_t is NOP because default tsc_khz
in x86_def_t is 0 and CPUX86State.tsc_khz is also initialized to 0
by default. So there is no need to overwrite tsc_khz with default 0
because field was already initialized to 0.
Custom tsc-frequency setting is not affected due to it being set
without using x86_def_t.
Field tsc_khz in x86_def_t becomes unused with this patch, so drop it
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move custom features parsing after built-in cpu_model defaults are set
and set custom features directly on CPU instance. That allows to make a
clear distinction between built-in cpu model defaults that eventually
should go into class_init() and extra property setting which is done
after defaults are set on CPU instance.
Impl. details:
* use object_property_parse() property setter so it would be a mechanical
change to switch to global properties later.
* And after all current features/properties are converted into static
properties, it will take a trivial patch to switch to global properties.
Which will allow to:
* get CPU instance initialized with all parameters passed on -cpu ...
cmd. line from object_new() call.
* call cpu_model/featurestr parsing only once before CPUs are created
* open a road for removing CPUxxxState.cpu_model_str field, when other
CPUs are similarly converted to subclasses and static properties.
- re-factor error handling, to use Error instead of fprintf()s, since
it is anyway passed in for property setter.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 8935499831 makes cpuid return to guest host's vendor value
instead of built-in one by default if kvm_enabled() == true and allows
to override this behavior if 'vendor' is specified on -cpu command line.
But every time guest calls cpuid to get 'vendor' value, host's value is
read again and again in default case.
It complicates semantics of vendor property and makes it harder to use.
Instead of reading 'vendor' value from host every time cpuid[vendor] is
called, override 'vendor' value only once in cpu_x86_find_by_name(), when
built-in CPU model is found and if(kvm_enabled() == true).
It provides the same default semantics
if (kvm_enabled() == true) vendor = host's vendor
else vendor = built-in vendor
and then later:
if (custom vendor) vendor = custom vendor
'vendor' value is overridden when user provides it on -cpu command line,
and there is no need for vendor_override field anymore, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Vendor property setter takes string as vendor value but cpudefs
use uint32_t vendor[123] fields to define vendor value. It makes it
difficult to unify and use property setter for values from cpudefs.
Simplify code by using vendor property setter, vendor[123] fields
are converted into vendor[13] array to keep its value. And vendor
property setter is used to access/set value on CPU.
- Make for() cycle reusable for the next patch by adding
x86_cpu_vendor_words2str()
Intel's CPUID spec[1] says:
"
5.1.1 ...
These registers contain the ASCII string: GenuineIntel
...
"
List[2] of known vendor values shows that they all are 12 ASCII
characters long, padded where necessary with space.
Current supported values are all ASCII characters packed in
ebx, edx, ecx. So lets state that QEMU supports 12 printable ASCII
characters packed in ebx, edx, ecx registers for cpuid(0) instruction.
*1 - http://www.intel.com/Assets/PDF/appnote/241618.pdf
*2 - http://en.wikipedia.org/wiki/CPUID#EAX.3D0:_Get_vendor_ID
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is no longer needed since dropping cpudef config file support.
Cleaning this up removes knowledge about other models from x86_def_t,
in preparation for reusing x86_def_t as intermediate step towards pure
QOM X86CPU subclasses.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Catch NULL name argument early to avoid repeated checks.
Similarly, check for -cpu host early and untangle from iterating through
model definitions. This prepares for introducing X86CPU subclasses.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This keeps compatibility on machine-types pc-1.2 and older, and prints a
warning in case the requested configuration won't get the correct
topology.
I couldn't think of a better way to warn about broken topology when in
compat mode other than using error_report(). The warning message will
probably be buried in a log file somewhere, but it's better than
nothing.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This introduces utility functions for the APIC ID calculation, based on:
Intel® 64 Architecture Processor Topology Enumeration
http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/
The code should be compatible with AMD's "Extended Method" described at:
AMD CPUID Specification (Publication #25481)
Section 3: Multiple Core Calcuation
as long as:
- nr_threads is set to 1;
- OFFSET_IDX is assumed to be 0;
- CPUID Fn8000_0008_ECX[ApicIdCoreIdSize[3:0]] is set to
apicid_core_width().
Unit tests included.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This function will be used by both the CPU initialization code and the
fw_cfg table initialization code.
Later this function will be updated to generate APIC IDs according to
the CPU topology.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The CPU ID in KVM is supposed to be the APIC ID, so change the
KVM_CREATE_VCPU call to match it. The current behavior didn't break
anything yet because today the APIC ID is assumed to be equal to the CPU
index, but this won't be true in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently, the pc-1.4 machine init function enables PV EOI and then
calls the pc-1.2 machine init function. The problem with this approach
is that now we can't enable any additional compatibility code inside the
pc-1.2 init function because it would end up enabling the compatibility
behavior on pc-1.3 and pc-1.4 as well.
This reverses the logic so that the pc-1.2 machine init function will
disable PV EOI, and then call the pc-1.4 machine init function.
This way we can change older machine-types to enable compatibility
behavior, and the newer machine-types (pc-1.3, pc-q35-1.4 and
pc-i440fx-1.4) would just use the default behavior.
(This means that one nice side-effect of this change is that pc-q35-1.4
will get PV EOI enabled by default, too)
It would be interesting to eventually change pc_init_pci_no_kvmclock()
and pc_init_isa() to reuse pc_init_pci_1_2() as well (so we don't need
to duplicate compatibility code on those two functions). But this will
be probably much easier to do after we create a PCInitArgs struct for
the PC initialization arguments, and/or after we use global-properties
to implement the compatibility modes present in pc_init_pci_1_2().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is a cleanup that tries to solve two small issues:
- We don't need a separate kvm_pv_eoi_features variable just to keep a
constant calculated at compile-time, and this style would require
adding a separate variable (that's declared twice because of the
CONFIG_KVM ifdef) for each feature that's going to be
enabled/disabled by machine-type compat code.
- The pc-1.3 code is setting the kvm_pv_eoi flag on cpuid_kvm_features
even when KVM is disabled at runtime. This small inconsistency in
the cpuid_kvm_features field isn't a problem today because
cpuid_kvm_features is ignored by the TCG code, but it may cause
unexpected problems later when refactoring the CPUID handling code.
This patch eliminates the kvm_pv_eoi_features variable and simply uses
kvm_enabled() inside the enable_kvm_pv_eoi() compat function, so it
enables kvm_pv_eoi only if KVM is enabled. I believe this makes the
behavior of enable_kvm_pv_eoi() clearer and easier to understand.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.
Resolve a Coding Style warning in openpic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace an if statement using magic numbers for breakpoint type with a
more explicit switch statement. This is to aid readability.
Change the return type and force_dr6_update argument type to bool.
While at it, fix Coding Style issues (missing braces).
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
"Go To Statement Considered Harmful" -- E. Dijkstra
To avoid an unnecessary goto within the switch statement, move
watchpoint insertion out of the switch statement. Improves readability.
While at it, fix Coding Style issues (missing braces, indentation).
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
hw_breakpoint_enabled() returned a bit field indicating whether a local
breakpoint and/or global breakpoint was enabled. Avoid this number magic
by using explicit boolean helper functions hw_local_breakpoint_enabled()
and hw_global_breakpoint_enabled(), to aid readability.
Reuse them for the hw_breakpoint_enabled() implementation and change
its return type to bool.
While at it, fix Coding Style issues (missing braces).
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implicit use of dr7 bit field is a little hard to understand,
so define constants for them and use them consistently.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
kvm_check_features_against_host() should be called when features can't
be changed, and when features are converted to properties it would be
possible to change them until realize time, so correct way is to call
kvm_check_features_against_host() in x86_cpu_realize().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Freeing resources in one place would require setting 'error'
to not NULL, so add some more error reporting before jumping to
exit branch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, needed for simplifying conversion to properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds the following feature words to the list of flags to be checked
by kvm_check_features_against_host():
- cpuid_7_0_ebx_features
- ext4_features
- kvm_features
- svm_features
This will ensure the "enforce" flag works as it should: it won't allow
QEMU to be started unless every flag that was requested by the user or
defined in the CPU model is supported by the host.
This patch may cause existing configurations where "enforce" wasn't
preventing QEMU from being started to abort QEMU. But that's exactly the
point of this patch: if a flag was not supported by the host and QEMU
wasn't aborting, it was a bug in the "enforce" code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Feature names were taken from the X86_FEATURE_* constants in the Linux
kernel code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of carrying the CPUID leaf/register and feature name array on
the model_features_t struct, move that information into
feature_word_info so it can be reused by other functions.
The goal is to eventually kill model_features_t entirely, but to do that
we have to either convert x86_def_t.features to an array or use
offsetof() inside FeatureWordInfo (to replace the pointers inside
model_features_t). So by now just move most of the model_features_t
fields to FeatureWordInfo except for the two pointers to local
arguments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This introduces a FeatureWord enum, FeatureWordInfo struct (with
generation information about a feature word), and a FeatureWordArray
typedef, and changes add_flagname_to_bitmaps() code and
cpu_x86_parse_featurestr() to use the new typedefs instead of separate
variables for each feature word.
This will help us keep the code at kvm_check_features_against_host(),
cpu_x86_parse_featurestr() and add_flagname_to_bitmaps() sane while
adding new feature name arrays.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
KVM_CAP_PV_MMU capability reporting was removed from the kernel since
v2.6.33 (see commit a68a6a7282373), and was completely removed from the
kernel since v3.3 (see commit fb92045843). It doesn't make sense to keep
it enabled by default, as it would cause unnecessary hassle when using
the "enforce" flag.
This disables kvm_mmu on all machine-types. With this fix, the possible
scenarios when migrating from QEMU <= 1.3 to QEMU 1.4 are:
------------+----------+----------------------------------------------------
src kernel | dst kern.| Result
------------+----------+----------------------------------------------------
>= 2.6.33 | any | kvm_mmu was already disabled and will stay disabled
<= 2.6.32 | >= 3.3 | correct live migration is impossible
<= 2.6.32 | <= 3.2 | kvm_mmu will be disabled on next guest reboot *
------------+----------+----------------------------------------------------
* If they are running kernel <= 2.6.32 and want kvm_mmu to be kept
enabled on guest reboot, they can explicitly add +kvm_mmu to the QEMU
command-line. Using 2.6.33 and higher, it is not possible to enable
kvm_mmu explicitly anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
To facilitate the field movements, pass MIPSCPU to malta_mips_config();
avoid that for mips_cpu_map_tc() since callers only access MIPS Thread
Contexts, inside TCG helpers.
Signed-off-by: Andreas Färber <afaerber@suse.de>
((pde & 0x1fe000) << 19) is the bits 39:32 of the final physical address, and
we shouldn't use unit32_t to calculate it. Convert the type to hwaddr to fix
this problem.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since cpudef config is not supported anymore and all remaining sources
now always set x86_def_t.vendor[123] fields, remove setting default
vendor to simplify future re-factoring.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When CPU properties are implemented, ext2_features may change
between object_new(CPU) and cpu_realize_fn(). Sanitizing
ext2_features for AMD based CPU at realize() time will keep
current behavior after CPU features are converted to properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that all entries have check_feat=~0 in
kvm_check_features_against_host(), we can eliminate check_feat entirely
and make the code check all bits.
This patch shouldn't introduce any behavior change, as check_feat is set
to ~0 on all entries.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When nested SVM is supported, the kernel returns the SVM flag on
GET_SUPPORTED_CPUID[1], so we can check the SVM flag safely in
kvm_check_features_against_host().
I don't know why the original code ignored the SVM flag. Maybe it was
because kvm_cpu_fill_host() used the CPUID instruction directly instead
of GET_SUPPORTED_CPUID
[1] Older kernels (before v2.6.37) returned the SVM flag even if nested
SVM was _not_ supported. So the only cases where this patch should
change behavior is when SVM is being requested by the user or the
CPU model, but not supported by the host. And on these cases we
really want QEMU to abort if the "enforce" option is set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
I have no idea why PPRO_FEATURES was being ignored on the check of the
CPUID.80000001H.EDX bits. I believe it was a mistake, and it was
supposed to be ~(PPRO_FEATURES & CPUID_EXT2_AMD_ALIASES) or just
~CPUID_EXT2_AMD_ALIASES, because some time ago kvm_cpu_fill_host() used
the CPUID instruction directly (instead of
kvm_arch_get_supported_cpuid()).
But now kvm_cpu_fill_host() uses kvm_arch_get_supported_cpuid(), and
kvm_arch_get_supported_cpuid() returns all supported bits for
CPUID.80000001H.EDX, even the AMD aliases (that are explicitly copied
from CPUID.01H.EDX), so we can make the code check/enforce all the
CPUID.80000001H.EDX bits.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We don't need any hack to ignore CPUID_EXT_HYPERVISOR anymore, because
kvm_arch_get_supported_cpuid() now sets CPUID_EXT_HYPERVISOR properly.
So, this shouldn't introduce any behavior change, but it makes the code
simpler.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The -cpu check/enforce warnings are printing incorrect information about the
missing flags. There are no feature flags on CPUID leaves 0 and 0x80000000, but
there were references to 0 and 0x80000000 in the table at
kvm_check_features_against_host().
This changes the model_features_t struct to contain the register number as
well, so the error messages print the correct CPUID leaf+register information,
instead of wrong CPUID leaf numbers.
This also changes the format of the error messages, so they follow the
"CPUID.<leaf>.<register>.<name> [bit <offset>]" convention used in Intel
documentation. Example output:
$ qemu-system-x86_64 -machine pc-1.0,accel=kvm -cpu Opteron_G4,+ia64,enforce
warning: host doesn't support requested feature: CPUID.01H:EDX.ia64 [bit 30]
warning: host doesn't support requested feature: CPUID.01H:ECX.xsave [bit 26]
warning: host doesn't support requested feature: CPUID.01H:ECX.avx [bit 28]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.abm [bit 5]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.sse4a [bit 6]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.misalignsse [bit 7]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.3dnowprefetch [bit 8]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.xop [bit 11]
warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
Unable to find x86 CPU definition
$
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When using -cpu host, we don't need to use the kvm_default_features
variable, as the user is explicitly asking QEMU to enable all feature
supported by the host.
This changes the kvm_cpu_fill_host() code to use GET_SUPPORTED_CPUID to
initialize the kvm_features field, so we get all host KVM features
enabled.
This will also allow us to properly check/enforce KVM features inside
kvm_check_features_against_host() later. For example, we will be able to
make this:
$ qemu-system-x86_64 -cpu ...,+kvm_pv_eoi,enforce
refuse to start if kvm_pv_eoi is not supported by the host (after we fix
kvm_check_features_against_host() to check KVM flags as well).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The existing -cpu host code simply sets every bit inside svm_features
(initializing it to -1), and that makes it impossible to make the
enforce/check options work properly when the user asks for SVM features
explicitly in the command-line.
So, instead of initializing svm_features to -1, use GET_SUPPORTED_CPUID
to fill only the bits that are supported by the host (just like we do
for all other CPUID feature words inside kvm_cpu_fill_host()).
This will keep the existing behavior (as filter_features_for_kvm()
already uses GET_SUPPORTED_CPUID to filter svm_features), but will allow
us to properly check for KVM features inside
kvm_check_features_against_host() later.
For example, we will be able to make this:
$ qemu-system-x86_64 -cpu ...,+pfthreshold,enforce
refuse to start if the SVM "pfthreshold" feature is not supported by the
host (after we fix kvm_check_features_against_host() to check SVM flags
as well).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 'qom-cpu' of git://repo.or.cz/qemu/afaerber:
MAINTAINERS: Include X86CPU in CPU maintenance area
cpu: Move kvm_run into CPUState
cpu: Move kvm_state field into CPUState
ppc_booke: Pass PowerPCCPU to ppc_booke_timers_init()
ppc4xx_devs: Return PowerPCCPU from ppc4xx_init()
ppc_booke: Pass PowerPCCPU to {decr,fit,wdt} timer callbacks
ppc: Pass PowerPCCPU to [h]decr timer callbacks
ppc: Pass PowerPCCPU to [h]decr callbacks
ppc: Pass PowerPCCPU to ppc_set_irq()
kvm: Pass CPUState to kvm_vcpu_ioctl()
kvm: Pass CPUState to kvm_arch_*
cpu: Move kvm_fd into CPUState
qdev-properties.c: Separate core from the code used only by qemu-system-*
qdev: Coding style fixes
cpu: Introduce CPUListState struct
target-alpha: Add support for -cpu ?
target-alpha: Turn CPU definitions into subclasses
target-alpha: Avoid leaking the alarm timer over reset
alpha: Pass AlphaCPU array to Typhoon
target-alpha: Let cpu_alpha_init() return AlphaCPU
This fixes a subtle bug. A bug that probably won't cause trouble for any
existing OS, but a bug anyway:
Intel SDM Volume 2, CPUID Instruction states:
> Two types of information are returned: basic and extended function
> information. If a value entered for CPUID.EAX is higher than the maximum
> input value for basic or extended function for that processor then the
> data for the highest basic information leaf is returned. For example,
> using the Intel Core i7 processor, the following is true:
>
> CPUID.EAX = 05H (* Returns MONITOR/MWAIT leaf. *)
> CPUID.EAX = 0AH (* Returns Architectural Performance Monitoring leaf. *)
> CPUID.EAX = 0BH (* Returns Extended Topology Enumeration leaf. *)
> CPUID.EAX = 0CH (* INVALID: Returns the same information as CPUID.EAX = 0BH. *)
> CPUID.EAX = 80000008H (* Returns linear/physical address size data. *)
> CPUID.EAX = 8000000AH (* INVALID: Returns same information as CPUID.EAX = 0BH. *)
AMD's CPUID Specification, on the other hand, is less specific:
> The CPUID instruction supports two sets or ranges of functions,
> standard and extended.
>
> • The smallest function number of the standard function range is
> Fn0000_0000. The largest function num- ber of the standard function
> range, for a particular implementation, is returned in CPUID
> Fn0000_0000_EAX.
>
> • The smallest function number of the extended function range is
> Fn8000_0000. The largest function num- ber of the extended function
> range, for a particular implementation, is returned in CPUID
> Fn8000_0000_EAX.
>
> Functions that are neither standard nor extended are undefined and
> should not be relied upon.
QEMU's behavior matched Intel's specification before, but this was
changed by commit b3baa152aa. This patch
restores the behavior documented by Intel when cpuid_xlevel2 is 0.
The existing behavior when cpuid_xlevel2 is set (falling back to
level=cpuid_xlevel) is being kept, as I couldn't find any public
documentation on the CPUID 0xC0000000 function range on Centaur CPUs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The file is only including error.h and qerror.h. Prefer explicit
inclusion of whatever files are needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported
Basic design is to emulate the MSR by allowing reads and writes to the
hypervisor vcpu specific locations to store the value of the emulated MSRs.
In this way the IA32_TSC_ADJUST value will be included in all reads to
the TSC MSR whether through rdmsr or rdtsc.
As this is a new MSR that the guest may access and modify its value needs
to be migrated along with the other MRSs. The changes here are specifically
for recognizing when IA32_TSC_ADJUST is enabled in CPUID and code added
for migrating its value.
Signed-off-by: Will Auld <will.auld@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* afaerber/qom-cpu:
target-i386: Postpone cpuid_level update to realize time
target-i386: Use define for cpuid vendor string size
target-i386: Separate feature string parsing from CPU model lookup
target-i386/cpu.c: Coding style fixes
qdev: qdev_create(): use error_report() instead of hw_error()
sysemu.h: Include qemu-types.h instead of qemu-common.h
Create qemu-types.h for struct typedefs
qlist.h: Do not include qemu-common.h
qga/channel-posix.c: Include headers it needs
qapi/qmp-registry.c: Include headers it needs
ui/vnc-palette.c: Include headers it needs
user: Rename qemu-types.h to qemu-user-types.h
user: Move *-user/qemu-types.h to main directory
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Delay capping cpuid_level to 7 to realize time so property setters
for cpuid_7_0_ebx_features and "level" could be used in any order/time
between x86_cpu_initfn() and x86_cpu_realize().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of parsing the whole cpu_model string inside
cpu_x86_find_by_name(), first split it into the CPU model name and the
full feature string, then parse the feature string into pieces.
When using CPU model classes, those two pieces of information will be
used at different moments (CPU model name will be used to find CPU
class, feature string will be used after CPU object was created), so
making the split in two steps will make it easier to refactor the code
later.
This should also help on the CPU properties work, that will just need to
replace the cpu_x86_parse_featurestr() logic (and can keep the CPU model
lookup code as-is).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
- Use spaces instead of tabs on cpu_x86_cpuid().
- Use braces on 'if' statement cpu_x86_find_by_name().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
SSSE3 support has been added to TCG more than 4 years ago in commit
4242b1bd8a. It has been disabled by
mistake in commit 551a2dec8f.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When adding the Haswell CPU model, I intended to make it a superset of the
features present on the SandyBridge model, but I have removed the SEP and
RDTSCP features from the feature list by mistake. This patch adds the
missing SEP and RDTSCP features (that are present on SandyBridge) to
Haswell.
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* afaerber/qom-cpu:
target-i386: Add Haswell CPU model
target-i386/cpu: Add new Opteron CPU model
target-i386/cpu: Name new CPUID bits
qapi-types.h: Don't include qemu-common.h
osdep: Move qemu_{open,close}() prototypes
qemu-config.h: Include headers it needs
vnc-palette.h: Include <stdbool.h>
qemu-fsdev-dummy.c: Include module.h
qdev: Split up header so it can be used in cpu.h
Move qemu_irq typedef out of qemu-common.h
qemu-common.h: Comment about usage rules
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new base CPU model called Opteron_G5 to model the latest
Opteron CPUs. This increases the model value and model numbers and
adds TBM, F16C and FMA over the latest G4 model.
Signed-off-by: Andre Przywara <osp@andrep.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: edited commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Update QEMU's knowledge of CPUID bit names. This allows to
enable/disable those new features on QEMU's command line when
using KVM and prepares future feature enablement in QEMU.
This adds F16C, RDRAND, LWP, TBM, TopoExt, PerfCtr_Core, PerfCtr_NB,
FSGSBASE, BMI1, AVX2, BMI2, ERMS, PCID, InvPCID, RTM, RDSeed and ADX.
Sources where the AMD BKDG for Family 15h/Model 10h, Intel Software
Developer Manual, and the Linux kernel for the leaf 7 bits.
Signed-off-by: Andre Przywara <osp@andrep.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: added CPUID_EXT_PCID]
[ehabkost: edited commit message]
[ehabkost: rebased against latest qemu.git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This fixes the following:
target-i386/cpu.o: In function `kvm_cpu_fill_host':
target-i386/cpu.c:783: undefined reference to `kvm_state'
I didn't notice the problem before because GCC was optimizing the entire
kvm_cpu_fill_host() function out (because all calls are conditional on
kvm_enabled()).
* cpu_x86_fill_model_id() is used only if CONFIG_KVM is set, so #ifdef it
entirely to avoid compiler warnings.
* kvm_cpu_fill_host() should be called only if KVM is enabled, so
use #ifdef CONFIG_KVM around the entire function body.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* qemu-kvm/uq/master: (28 commits)
update-linux-headers.sh: Handle new kernel uapi/ directories
target-i386: kvm_cpu_fill_host: use GET_SUPPORTED_CPUID
target-i386: cpu: make -cpu host/check/enforce code KVM-specific
target-i386: make cpu_x86_fill_host() void
Emulate qemu-kvms -no-kvm option
Issue warning when deprecated -tdf option is used
Issue warning when deprecated drive parameter boot=on|off is used
Use global properties to emulate -no-kvm-pit-reinjection
Issue warning when deprecated -no-kvm-pit is used
Use machine options to emulate -no-kvm-irqchip
cirrus_vga: allow configurable vram size
target-i386: Add missing kvm cpuid feature name
i386: cpu: add missing CPUID[EAX=7,ECX=0] flag names
i386: kvm: filter CPUID leaf 7 based on GET_SUPPORTED_CPUID, too
i386: kvm: reformat filter_features_for_kvm() code
i386: kvm: filter CPUID feature words earlier, on cpu.c
i386: kvm: mask cpuid_ext4_features bits earlier
i386: kvm: mask cpuid_kvm_features earlier
i386: kvm: x2apic is not supported without in-kernel irqchip
i386: kvm: set CPUID_EXT_TSC_DEADLINE_TIMER on kvm_arch_get_supported_cpuid()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Change the kvm_cpu_fill_host() function to use
kvm_arch_get_supported_cpuid() instead of running the CPUID instruction
directly, when checking for supported CPUID features.
This should solve two problems at the same time:
* "-cpu host" was not enabling features that don't need support on
the host CPU (e.g. x2apic);
* "check" and "enforce" options were not detecting problems when the
host CPU did support a feature, but the KVM kernel code didn't
support it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rationale:
* "-cpu host" is available only when using KVM
* The current implementation of -cpu check/enforce
(check_features_against_host()) makes sense only when using KVM.
So this makes the functions check_features_against_host() and
cpu_x86_fill_host() KVM-specific, document them as such, and rename them
to kvm_check_features_against_host() and kvm_cpu_fill_host().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The return value of that function is always 0, and is always ignored.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently "-cpu host,-kvmclock,-kvm_nopiodelay,-kvm_mmu" does not
turn off all bits in CPUID 0x40000001 EAX.
The missing ones is KVM_FEATURE_STEAL_TIME.
This adds the name kvm_steal_time.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Now that CPUID leaf 7 features can be enabled/disabled on the
command-line, we need to filter them properly using GET_SUPPORTED_CPUID,
at the same place where other features are filtered out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cosmetic, but it will also help to make futher patches easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
cpu.c contains the code that will check if all requested CPU features
are available, so the filtering of KVM features must be there, so we can
implement "check" and "enforce" properly.
The only point where kvm_arch_init_vcpu() is called on i386 is:
- cpu_x86_init()
- x86_cpu_realize() (after cpu_x86_register() is called)
- qemu_init_vcpu()
- qemu_kvm_start_vcpu()
- qemu_kvm_thread_fn() (on a new thread)
- kvm_init_vcpu()
- kvm_arch_init_vcpu()
With this patch, the filtering will be done earlier, at:
- cpu_x86_init()
- cpu_x86_register() (before x86_cpu_realize() is called)
Also, the KVM CPUID filtering will now be done at the same place where
the TCG CPUID feature filtering is done. Later, the code can be changed
to use the same filtering code for the "check" and "enforce" modes, as
now the cpu.c code knows exactly which CPU features are going to be
exposed to the guest (and much earlier).
One thing I was worrying about when doing this is that
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(), and
maybe the 'kvm_kernel_irqchip' global variable wasn't initialized yet at
CPU creation time. But kvm_kernel_irqchip is initialized during
kvm_init(), that is called very early (much earlier than the machine
init function), and kvm_init() is already a requirement to run the
GET_SUPPORTED_CPUID ioctl() (as kvm_init() initializes the kvm_state
global variable).
Side note: it would be nice to keep KVM-specific code inside kvm.c. The
problem is that properly implementing -cpu check/enforce code (that's
inside cpu.c) depends directly on the feature bit filtering done using
kvm_arch_get_supported_cpuid(). Currently -cpu check/enforce is broken
because it simply uses the host CPU feature bits instead of
GET_SUPPORTED_CPUID, and we need to fix that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This way all the filtering by GET_SUPPORTED_CPUID is being done at the
same place in the code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of masking the KVM feature bits very late (while building the
KVM_SET_CPUID2 data), mask it out on env->cpuid_kvm_features, at the
same point where the other feature words are masked out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is necessary so that x2apic is not improperly enabled when the
in-kernel irqchip is disabled.
This won't generate a warning with "-cpu ...,check" because the current
check/enforce code is broken (it checks the host CPU data directly,
instead of using kvm_arch_get_supported_cpuid()), but it will be
eventually fixed to properly report the missing x2apic flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This moves the CPUID_EXT_TSC_DEADLINE_TIMER CPUID flag hacking from
kvm_arch_init_vcpu() to kvm_arch_get_supported_cpuid().
Full git grep for kvm_arch_get_supported_cpuid:
kvm.h:uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
target-i386/cpu.c: x86_cpu_def->cpuid_7_0_ebx_features = kvm_arch_get_supported_cpuid(kvm_state, 0x7, 0, R_EBX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EDX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
target-i386/kvm.c:uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
target-i386/kvm.c: cpuid_1_edx = kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
target-i386/kvm.c: env->cpuid_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
* target-i386/kvm.c: env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_ECX);
target-i386/kvm.c: env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(s, 0x8000000A,
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, KVM_CPUID_FEATURES, 0, R_EAX);
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX);
Note that there is only one call for CPUID[1].ECX above (*), and it is
the one that gets hacked to include CPUID_EXT_TSC_DEADLINE_TIMER, so we
can simply make kvm_arch_get_supported_cpuid() set it, to let the rest
of the code know the flag can be safely set by QEMU.
One thing I was worrying about when doing this is that now
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(). But
the 'kvm_kernel_irqchip' global variable is initialized during
kvm_init(), that is called very early, and kvm_init() is already a
requirement to run the GET_SUPPORTED_CPUID ioctl() (as kvm_init() is the
function that initializes the 'kvm_state' global variable).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Additional fixups will be added, and making them a single 'if/else if'
chain makes it clearer than two nested switch statements.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The reg switch will be moved to a separate function, so store the entry
pointer in a variable.
No behavior change, just code movement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of a function-specific has_kvm_features variable, simply use a
"found" variable that will be checked in case we have to use the legacy
get_para_features() interface.
No behavior change, just code cleanup.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The for loop will become a separate function, so clean it up so it can
become independent from the bit hacking for R_EDX.
No behavior change[1], just code movement.
[1] Well, only if the kernel returned CPUID leafs 1 or 0x80000001 as
unsupported, but there's no kernel version that does that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]
Simplifies the call in apic_sipi() again and needed for moving halted
field to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Prepares for using a link<> property to connect APIC with CPU and for
changing the CPU APIs to CPUState.
Resolve Coding Style warnings by moving the closing parenthesis of
foreach_apic() macro to next line.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This prepares for changing the variable type from void*.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
(L)APIC is a part of cpu [1] so move APIC initialization inside of
x86_cpu object. Since cpu_model and override flags currently specify
whether APIC should be created or not, APIC creation&initialization is
moved into x86_cpu_apic_init() which is called from x86_cpu_realize().
[1] - all x86 cpus have integrated APIC if we overlook existence of i486,
and it's more convenient to model after majority of them.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enable KVM PV EOI by default. You can still disable it with
-kvm_pv_eoi cpu flag. To avoid breaking cross-version migration,
enable only for qemu 1.3 (or in the future, newer) machine type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I removed a line by mistake on commit
3b671a40ca, containing the flags lm/i64,
3dnow, and 3dnowext. This patch restores the removed line.
Reviewed-by: Don Slutz <Don@cloudswitch.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Supervisor Mode Execution Prevention (SMEP) and
Supervisor Mode Access Prevention (SMAP) for x86. The purpose of the
patch, obviously, is to help kernel developers debug the support for
those features.
A fair bit of the code relates to the handling of CPUID features. The
CPUID code probably would get greatly simplified if all the feature
bit words were unified into a single vector object, but in the
interest of producing a minimal patch for SMEP/SMAP, and because I had
very limited time for this project, I followed the existing style.
[ v2: don't change the definition of the qemu64 CPU shorthand, since
that breaks loading old snapshots. Per Anthony Liguori this can be
fixed once the CPU feature set is snapshot.
Change the coding style slightly to conform to checkpatch.pl. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The -cpu configuration interface is based on a list of feature names or
properties, on a single namespace, so there's no need to mention on
which CPUID leaf/register each flag is located.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of having duplicate feature names on the ext2_feature array for
the AMD feature bit aliases, we keep the feature names only on the
feature_name[] array, and copy the corresponding bits to
cpuid_ext2_features in case the CPU vendor is AMD.
This will:
- Make sure we don't set the feature bit aliases on Intel CPUs;
- Make it easier to convert feature bits to CPU properties, as now we
have a single bit on the x86_def_t struct for each CPU feature.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Both constants have the same value, but CPUID_EXT2_AMD_ALIASES is
defined without using magic numbers.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instea of using a hardcoded hex constant, define CPUID_EXT2_AMD_ALIASES
as the set of CPUID[8000_0001].EDX bits that on AMD are the same as the
bits of CPUID[1].EDX.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Bit 10 of CPUID[8000_0001].EDX is not defined as an alias of
CPUID[1].EDX[10], so do not duplicate it on
kvm_arch_get_supported_cpuid().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* stefanha/trivial-patches:
w32: Always use standard instead of native format strings
net/socket: Fix compiler warning (regression for MinGW)
linux-user: Remove redundant null check and replace free by g_free
qemu-timer: simplify qemu_run_timers
TextConsole: saturate escape parameter in TTY_STATE_CSI
curses: don't initialize curses when qemu is daemonized
dtrace backend: add function to reserved words
pflash_cfi01: Fix warning caused by unreachable code
ioh3420: Remove unreachable code
lm4549: Fix buffer overflow
cadence_uart: Fix buffer overflow
qemu-sockets: Fix potential memory leak
qemu-ga: Remove unreachable code after g_error
target-i386: Allow tsc-frequency to be larger then 2.147G
The check using INT_MAX (2147483647) is wrong in this case.
Signed-off-by: Fred Oliveira <foliveira@cloudswitch.com>
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
It was only used by now removed setfeatures() function.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It's nice to have a flexible system to maintain CPU models as data, but
this is holding us from making improvements in the CPU code because it's
not using the common infra-structure, and because the machine-type data
is still inside C code.
Users who want to configure CPU features directly may simply use the
"-cpu" command-line option (and maybe an equivalent -device option in
the future) to set CPU features.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Those models are maintained by QEMU and may require compatibility code
to be added when making some changes. Keeping the data in the C source
code should make it simpler to handle those details.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Those constants will be used by new CPU model definitions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit c8057f95 (accidentally) disabled the ability to pass
option strings starting with '?' to the target-specific
cpu_list function, so the target-i386 specific "-cpu ?dump",
"-cpu ?cpuid" and "-cpu ?model" stopped working.
Since these options are undocumented and not used by libvirt,
simply drop them completely rather than reinstating them
with new style syntax. Instead, we fold the ?model and ?cpuid
output into the output of the plain "-cpu help" output. The
detailed output produced by ?dump is dropped.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
These helpers abstract the interaction of upcoming pci-assign with the
KVM kernel services. Put them under i386 only as other archs will
implement device pass-through via VFIO and not this classic interface.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit ef8621b1a3 added an include
file which is not available for MinGW compilations.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support get/set of new PV EOI MSR, for migration.
Add an optional section for MSR value - send it
out in case MSR was changed from the default value (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have a problem with how we handle migration with KVM paravirt features.
We unconditionally enable paravirt features regardless of whether we know how
to migrate them.
We also don't tie paravirt features to specific machine types so an old QEMU on
a new kernel would expose features that never existed.
The 1.2 cycle is over and as things stand, migration is broken. Michael has
another series that adds support for migrating PV EOI and attempts to make it
work correctly for different machine types.
After speaking with Michael on IRC, we agreed to take this patch plus 1 & 4
from his series. This makes sure QEMU can migrate PV EOI if it's enabled, but
does not enable it by default.
This also means that we won't unconditionally enable new features for guests
future proofing us from this happening again in the future.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
> This instruction is always treated as a register-to-register (MOD = 11)
> instruction, regardless of the encoding of the MOD field in the MODR/M
> byte.
Also, Microport UNIX System V/386 v 2.1 (ca 1987) runs fine on
real Intel 386 and 486 CPU's (at least), but does not run in qemu without
this patch.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
mingw32 seems to want the declaration to also carry the weak attribute.
Strangely, gcc on Linux absolutely does not want the declaration to be marked
as weak. This may not be the right fix, but it seems to do the trick.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Rename remains of op_helper.c to seg_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make FPU helpers take a parameter for CPUState instead
of relying on global env.
Introduce temporary wrappers for FPU load and store ops. Remove
wrappers for non-AREG0 code. Don't call unconverted helpers
directly.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
* qemu-kvm/uq/master:
kvm: Add documentation comment for kvm_irqchip_in_kernel()
kvm: Decouple 'GSI routing' from 'kernel irqchip'
kvm: Decouple 'MSI routing via irqfds' from 'kernel irqchip'
kvm: Decouple 'irqfds usable' from 'kernel irqchip'
kvm: Move kvm_allows_irq0_override() to target-i386, fix return type
kvm: Rename kvm_irqchip_set_irq() to kvm_set_irq()
kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'
configure: Don't implicitly hardcode list of KVM architectures
kvm: Check if smp_cpus exceeds max cpus supported by kvm
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
Don't assume having an in-kernel irqchip means that GSI
routing is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Decouple another x86-specific assumption about what irqchips imply.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of assuming that we can use irqfds if and only if
kvm_irqchip_in_kernel(), add a bool to the KVMState which
indicates this, and is set only on x86 and only if the
irqchip is in the kernel.
The kernel documentation implies that the only thing
you need to use KVM_IRQFD is that KVM_CAP_IRQFD is
advertised, but this seems to be untrue. In particular
the kernel does not (alas) return a sensible error if you
try to set up an irqfd when you haven't created an irqchip.
If it did we could remove all this nonsense and let the
kernel return the error code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_allows_irq0_override() is a totally x86 specific concept:
move it to the target-specific source file where it belongs.
This means we need a new header file for the prototype:
kvm_i386.h, in line with the existing kvm_ppc.h.
While we are moving it, fix the return type to be 'bool' rather
than 'int'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.
When reset over QOM hierarchy is implemented, reset callback
should be removed.
v2:
- leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
init is moved in cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to the Intel manual
"Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3", "3.4.4 Segment Loading Instructions in IA-32e Mode":
"When in compatibility mode, FS and GS overrides operate as defined by
32-bit mode behavior regardless of the value loaded into the upper 32
linear-address bits of the hidden descriptor register base field.
Compatibility mode ignores the upper 32 bits when calculating an effective address."
However, the code misses the 64-bit mode case, where an instruction with
address and segment size override would be translated incorrectly. For example,
inc dword ptr gs:260h[ebx*4] gets incorrectly translated to:
(uint32_t)(gs.base + ebx * 4 + 0x260)
instead of
gs.base + (uint32_t)(ebx * 4 + 0x260)
Signed-off-by: Vitaly Chipounov <vitaly.chipounov@epfl.ch>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes Qemu recognize the PCID feature specified from configuration or command line options.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* qemu-kvm/uq/master:
virtio: move common irqfd handling out of virtio-pci
virtio: move common ioeventfd handling out of virtio-pci
event_notifier: add event_notifier_set_handler
memory: pass EventNotifier, not eventfd
ivshmem: wrap ivshmem_del_eventfd loops with transaction
ivshmem: use EventNotifier and memory API
event_notifier: add event_notifier_init_fd
event_notifier: remove event_notifier_test
event_notifier: add event_notifier_set
apic: Defer interrupt updates to VCPU thread
apic: Reevaluate pending interrupts on LVT_LINT0 changes
apic: Resolve potential endless loop around apic_update_irq
kvm: expose tsc deadline timer feature to guest
kvm_pv_eoi: add flag support
kvm: Don't abort on kvm_irqchip_add_msi_route()
KVM performs TPR raising asynchronously to QEMU, specifically outside
QEMU's global lock. When an interrupt is injected into the APIC and TPR
is checked to decide if this can be delivered, a stale TPR value may be
used, causing spurious interrupts in the end.
Fix this by deferring apic_update_irq to the context of the target VCPU.
We introduce a new interrupt flag for this, CPU_INTERRUPT_POLL. When it
is set, the VCPU calls apic_poll_irq before checking for further pending
interrupts. To avoid special-casing KVM, we also implement this logic
for TCG mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Rephrase some of the expressions used to select an entry
in the SSE op table arrays so that it's clearer that they
don't overrun the op table array size.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The X86_64_DEF macro is a confusing way of making some terms
in a conditional only appear if TARGET_X86_64 is defined. We
only use it in two places, and in both cases this is for making
the same test, so abstract that check out into a function
where we can use a more conventional #ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 11f8cdb removed all the uses of the X86_64_ONLY
macro. The BUGGY_64() macro has been unused for a long time:
it originally marked some ops which couldn't be enabled
because of issues with the pre-TCG code generation scheme.
Remove the now-unnecessary definitions of both macros.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit c4baa0503d improved SSE table
type safety which now raises compiler errors when latest QEMU was
configured with --enable-debug.
Fix this by splitting the SSE tables even further to separate
helper functions with different signatures.
Instead of crashing by calling address 0, the code now jumps to
label illegal_op.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch exposes tsc deadline timer feature to guest if
1). in-kernel irqchip is used, and
2). kvm has emulated tsc deadline timer, and
3). user authorize the feature exposing via -cpu or +/- tsc-deadline
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support the new PV EOI flag in kvm - it recently got merged
into kvm.git. Set by default with -cpu kvm.
Set for -cpu qemu by adding +kvm_pv_eoi.
Clear by adding -kvm_pv_eoi to -cpu option.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move condition code helpers to cc_helper.c.
Move the shared inline functions lshift(), cpu_load_eflags() and
cpu_cc_compute_all() to cpu.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move shift templates from helper_template.h to
shift_helper_template.h and the condition code helpers
to cc_helper_template.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SSE function tables could easily be corrupted because of use
of void pointers.
Introduce function pointer types and helper variables in order
to improve type safety.
Split sse_op_table3 according to types used.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().
Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In order to make cpu object not depended on external ad-hoc
initialization routines, move tcg initialization from cpu_x86_init
inside cpu object "x86_cpu_initfn()".
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Chains of exception handlers are currently unused feature, drop it
for now so as not to expose prev_debug_excp_handler at global
scope when moving tcg initialization into target-i386/cpu.c
Later we probably could re-invent better interface for this.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
This new 'QEmu' was recently added.
Replace it by the official all upper case 'QEMU'.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This simplifies things, because they will only be included for softmmu
targets and because the stubs are taken out-of-line in separate files,
which in the future could even be compiled only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qmp/queue/qmp: (29 commits)
Add 'query-events' command to QMP to query async events
qapi: convert netdev_del
qapi: convert netdev_add
net: net_client_init(): use error_set()
net: purge the monitor object from all init functions
qemu-config: introduce qemu_find_opts_err()
qemu-config: find_list(): use error_set()
qerror: introduce QERR_INVALID_OPTION_GROUP
qemu-option: qemu_opts_from_qdict(): use error_set()
qemu-option: introduce qemu_opt_set_err()
qemu-option: opt_set(): use error_set()
qemu-option: qemu_opts_validate(): use error_set()
qemu-option: qemu_opt_parse(): use error_set()
qemu-option: parse_option_size(): use error_set()
qemu-option: parse_option_bool(): use error_set()
qemu-option: parse_option_number(): use error_set()
qemu-option: qemu_opts_create(): use error_set()
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
make gdb_id() generally avialable and rename it to cpu_index()
target-i386: Add API to get note's size
...
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Turn cpu_init macro into a static inline function returning CPUX86State
for backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Allows to use cpu_reset() in place of cpu_state_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
We should know where the note and memory is stored before writing
them to vmcore. If we know this, we can avoid using lseek() when
creating vmcore.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Dump info contains: endian, class and architecture. The next
patch will use these information to create vmcore. Note: on
x86 box, the class is ELFCLASS64 if the memory is larger than 4G.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The core file has register's value. But it does not include all registers value.
Store the cpu status into QEMU note, and the user can get more information
from vmcore. If you change QEMUCPUState, please count up QEMUCPUSTATE_VERSION.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This API will be used in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Changes v2 -> v3;
- Check for kvm_enabled() before setting cpuid_7_0_ebx_features
Changes v1 -> v2:
- Use kvm_arch_get_supported_cpuid() instead of host_cpuid() on
cpu_x86_fill_host().
We should use GET_SUPPORTED_CPUID for all bits on "-cpu host"
eventually, but I am not changing all the other CPUID leaves because
we may not be able to test such an intrusive change in time for 1.1.
Description of the bug:
Since QEMU 0.15, the CPUID information on CPUID[EAX=7,ECX=0] is being
returned unfiltered to the guest, directly from the GET_SUPPORTED_CPUID
return value.
The problem is that this makes the resulting CPU feature flags
unpredictable and dependent on the host CPU and kernel version. This
breaks live-migration badly if migrating from a host CPU that supports
some features on that CPUID leaf (running a recent kernel) to a kernel
or host CPU that doesn't support it.
Migration also is incorrect (the virtual CPU changes under the guest's
feet) if you migrate in the opposite direction (from an old CPU/kernel
to a new CPU/kernel), but with less serious consequences (guests
normally query CPUID information only once on boot).
Fortunately, the bug affects only users using cpudefs with level >= 7.
The right behavior should be to explicitly enable those features on
[cpudef] config sections or on the "-cpu" command-line arguments. Right
now there is no predefined CPU model on QEMU that has those features:
the latest Intel model we have is Sandy Bridge.
I would like to get this fixed on 1.1, so I am submitting this patch,
that enables those features only if "-cpu host" is being used (as we
don't have any pre-defined CPU model that actually have those features).
After 1.1 is released, we can make those features properly configurable
on [cpudef] and -cpu configuration.
One problem is: with this patch, users with the following setup:
- Running QEMU 1.0;
- Using a cpudef having level >= 7;
- Running a kernel that supports the features on CPUID leaf 7; and
- Running on a CPU that supports some features on CPUID leaf 7
won't be able to live-migrate to QEMU 1.1. But for these users
live-migration is already broken (they can't live-migrate to hosts with
older CPUs or older kernels, already), I don't see how to avoid this
problem.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit de024815e3 (target-i386: QOM'ify
CPU init) moved mce_init() call from helper.c:cpu_x86_init() into
X86CPU's cpu.c:x86_cpu_initfn().
mce_init() checks for a family >= 6 though, so we could end up with a
sequence such as for -cpu somecpu,family=6:
x86_cpu_initfn => X86CPU::family == 5
mce_init => no-op
cpu_x86_register => X86CPU::family = 6
=> MCE unexpectedly not init'ed
or for -cpu someothercpu,family=5:
x86_cpu_initfn => X86CPU::family == 6
mce_init => init'ed
cpu_x86_register => X86CPU::family = 5
=> MCE unexpectedly init'ed
Therefore partially revert the above commit. To avoid moving
mce_init() back into helper.c, foresightedly move it into a
new x86_cpu_realize() function and, in lack of ObjectClass::realize,
call it directly from cpu_x86_init().
While at it, move the qemu_init_vcpu() call that used to follow
mce_init() in cpu_x86_init() into the new realizefn as well.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Use Hz as unit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Using it now would incur converting the three x86_def_t vendor words
into a string for object_property_set_str(), then back to three words
in the "vendor" setter.
The built-in CPU definitions use numeric preprocessor defines to
initialize the three words in a charset-safe way, so do not change the
fields to char[12] just to use the setter.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add the property early in the initfn so that it can be used in helpers
such as mce_init().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Add an error_free(), spotted by Michael Roth]
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
A family field value of 0xf and extended family field value of 0xff is
the maximum representable unsigned family number.
All other CPUID property values are bounds-checked, so add a check here
for symmetry before we adopt it in a property setter.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Avoids an x86_env_get_cpu() call there, to work with QOM properties.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Don't assume zeroed cpuid_model[] fields.
This didn't break anything yet but QOM properties should be able to set
the value to something else without setting an intermediate zero string.
Reviewed-by: Eduardo Habhost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Use memset() instead of for loop, suggested by Igor]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move code from cpu_x86_init() to new QOM x86_cpu_initfn().
Also move mce_init() to cpu.c since it's used nowhere else.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Embed CPUX86State as first member of X86CPU.
Distinguish between "x86_64-cpu" and "i386-cpu".
Drop cpu_x86_close() in favor of calling object_delete() directly.
For now let CPUClass::reset() call cpu_state_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc]
sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
This was a long pending bug, now revealed by the assert in
phys_page_find that stumbled over the large page index returned by
cpu_get_phys_page_debug for NX-marked pages: We need to mask out NX and
all user-definable bits 52..62 from PDEs and the final PTE to avoid
corrupting physical addresses.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
valgrind warns about padding fields which are passed
to vcpu ioctls uninitialized.
This is not an error in practice because kvm ignored padding.
Since the ioctls in question are off data path and
the cost is zero anyway, initialize padding to 0
to suppress these errors.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'upstream' of git://qemu.weilnetz.de/qemu:
Move definition of HOST_LONG_BITS to qemu-common.h
target-xtensa: Clean includes
target-unicore32: Clean includes
target-sh4: Clean includes
target-s390x: Clean includes
target-ppc: Clean includes
target-mips: Clean includes
target-microblaze: Clean includes
target-m68k: Clean includes
target-lm32: Clean includes
target-i386: Clean includes
target-cris: Clean includes
target-arm: Clean includes
target-alpha: Clean includes
Remove macro HOST_LONG_SIZE
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
Move the logic to transform the 48-char model ID into the 12-word model
value into a helper.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the stepping field into a helper function.
To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous stepping values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the model and extended model fields
into a helper function.
To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous model values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the family and extended family into a
helper function.
To make the helper self-contained and in preparation of future
unordered/multiple uses, mask out any previous family values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use 'i64' instead of 'lm' and 'xd' instead of 'nx' on Intel models.
The flags have different names on Intel docs, so use those names for clarity.
This is based on a previous patch from John Cooper where this was introduced
with many other changes at the same time. Original John's patch submission is
at Message-ID: <4DDAD5E7.2020002@redhat.com>, <http://marc.info/?l=qemu-devel&m=130618871926030>.
Changes v1 -> v2:
- Rebase patch against latest Qemu git tree
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pclmulqdq: /proc/cpuinfo on Linux and all documentation I have seen uses
pclmulqdq as the flag name. As the only document using pclmuldq seems to
be the Intel CPUID documentation (Application Note 485), it looks like a
typo and not the correct name for the flag.
ffxsr: AMD docs refer to fxsr_opt as ffxsr, so allow this named to be
used too.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow the APIC core to file a TPR access report. Depending on
the accelerator and kernel irqchip mode, it will either be delivered
right away or queued for later reporting.
In TCG mode, we can restart the triggering instruction and can therefore
forward the event directly. KVM does not allows us to restart, so we
postpone the delivery of events recording in the user space APIC until
the current instruction is completed.
Note that KVM without in-kernel irqchip will report the address after
the instruction that triggered the access.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Call to kvm_cpu_synchronize_state() is missing.
kvm_arch_stop_on_emulation_error may look at outdated registers here.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
To both avoid that kvm_irqchip_in_kernel always has to be paired with
kvm_enabled and that the former ends up in a function call, implement it
like the latter. This means keeping the state in a global variable and
defining kvm_irqchip_in_kernel as a preprocessor macro.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce the KVM-specific machine option kvm_shadow_mem. It allows to
set a custom shadow MMU size for the virtual machine. This is useful for
stress testing e.g.
Only x86 supports this for now, but it is in principle a generic
concept for all targets with shadow MMUs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This introduces the alternative APIC device which makes use of KVM's
in-kernel device model. External NMI injection via LINT1 is emulated by
checking the current state of the in-kernel APIC, only injecting a NMI
into the VCPU if LINT1 is unmasked and configured to DM_NMI.
MSI is not yet supported, so we disable this when the in-kernel model is
in use.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add the basic infrastructure to active in-kernel irqchip support, inject
interrupts into these models, and maintain IRQ routes.
Routing is optional and depends on the host arch supporting
KVM_CAP_IRQ_ROUTING. When it's not available on x86, we looe the HPET as
we can't route GSI0 to IOAPIC pin 2.
In-kernel irqchip support will once be controlled by the machine
property 'kernel_irqchip', but this is not yet wired up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit 2355c16e74 introduced a new ldmxcsr
helper taking an i32 argument, but the helper is actually passed a long.
Fix that by truncating the long to i32.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SSE rounding and flush to zero control has never been implemented. However
given that softfloat-native was using a single state for FPU and SSE and
given that glibc is setting both FPU and SSE state in fesetround(), this
was working correctly up to the switch to softfloat.
Fix that by adding an update_sse_status() function similar to
update_fpu_status(), and callin git on write to mxcsr.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers implemented dpps and dppd SSE instructions are not passing
the correct argument types to the softfloat functions. While they do
work anyway providing a correct behaviour, this patch fixes that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
roundps and roundss SSE2 instructions have been broken when switching
target-i386 to softfloat. They use float64_round_to_int to convert a
float32, and while the implicit conversion from float32 to float64 was
correct for softfloat-native, it is not for pure softfloat. Fix that by
using the correct registers and correct functions.
Also fix roundpd and roundsd implementation at the same time, even if
these functions are behaving correctly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
minpd, minps, minsd, minss and maxpd, maxps, maxsd, maxss SSE2
instructions have been broken when switching target-i386 to softfloat.
It's not possible to use comparison instructions on float types anymore
to softfloat, so use the floatXX_lt function instead, as the
float_XX_min and float_XX_max functions can't be used due to the Intel
specific behaviour.
As it implements the correct NaNs behaviour, let's remove the
corresponding entry from the TODO.
It fixes GDM screen display on Debian Lenny.
Thanks to Peter Maydell and Jason Wessel for their analysis of the
problem.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* qemu-kvm/memory/page_desc: (22 commits)
Remove cpu_get_physical_page_desc()
sparc: avoid cpu_get_physical_page_desc()
virtio-balloon: avoid cpu_get_physical_page_desc()
vhost: avoid cpu_get_physical_page_desc()
kvm: avoid cpu_get_physical_page_desc()
memory: remove CPUPhysMemoryClient
xen: convert to MemoryListener API
memory: temporarily add memory_region_get_ram_addr()
xen, vga: add API for registering the framebuffer
vhost: convert to MemoryListener API
kvm: convert to MemoryListener API
kvm: switch kvm slots to use host virtual address instead of ram_addr_t
memory: add API for observing updates to the physical memory map
memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
loader: remove calls to cpu_get_physical_page_desc()
framebuffer: drop use of cpu_get_physical_page_desc()
memory: introduce memory_region_find()
memory: add memory_region_is_logging()
memory: add memory_region_is_rom()
...
The latter was already commented out, the former is redundant as well.
We always get the latest changes after return from the guest via
kvm_arch_post_run.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Keep a per-VCPU xsave buffer for kvm_put/get_xsave instead of
continuously allocating and freeing it on state sync.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Field 0 (FCW+FSW) and 1 (FTW+FOP) were hard-coded so far.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When the i386 cmpxchg instruction is executed with a memory operand
and the comparison result is "unequal", do the memory write before
changing the accumulator instead of the other way around, because
otherwise the new accumulator value will incorrectly be used in the
comparison when the instruction is restarted after a page fault.
This bug was originally reported on 2010-04-25 as
https://bugs.launchpad.net/qemu/+bug/569760
Signed-off-by: Andreas Gustafsson <gson@gson.org>
cpu_x86_find_by_name() uses strtosz_suffix_unit(), but screws up the
error checking. It detects some failures, but not all. Undetected
failures result in a zero tsc_khz value (error value -1 divided by
1000), which means "no tsc_freq set".
To reproduce, try "-cpu qemu64,tsc_freq=9999999T".
strtosz_suffix_unit() fails, because the value overflows int64_t,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 66e3dd9282.
From Avi,
"Anthony, I think we should revert that commit and refactor cpuid for
1.1. The logic is spread over too many places which makes it hard to
reason about."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix obvious typos (decrement and off-by-one error) in pcmpestrm and pcmpistrm
which resulted in infinite loop. Reported by Frank Mehnert,
spotted also by Coverity (bug 84752853).
Reported-by: Frank Mehnert <frank.mehnert@oracle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
One n too many for running, need we say more.
Signed-Off-By: Vagrant Cascadian <vagrant@freegeek.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To reproduce the leak, put two name options into the same [cpudef]
section of target-x86_64.conf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The fact that a host cpu supports a feature doesn't mean that QEMU and KVM
will also support it, yet -cpuid host brings host features wholesale.
We need to whitelist each feature separately to make sure we support it.
This patch adds KVM whitelisting (by simply using KVM_GET_SUPPORTED_CPUID
instead of the CPUID instruction).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
apic id returned to guest kernel in ebx for cpuid(function=1) depends on
CPUX86State->cpuid_apic_id which gets populated after the cpuid information
is cached in the host kernel. This results in broken CPU topology in guest.
Fix this by setting cpuid_apic_id before cpuid information is passed to
the host kernel. This is done by moving the setting of cpuid_apic_id
to cpu_x86_init() where it will work for both KVM as well as TCG modes.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's needed for its default value - bit 0 specifies that "rep movs" is
good enough for memcpy, and Linux may use a slower memcpu if it is not set,
depending on cpu family/model.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Use subsections to save/restore the field (mtosatti).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
T0 was already masked to 16 bits when loading it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove also two assert statements which were the last remaining users.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
haddp[sd], hsubp[sd] and addsubp[sd] operate on floats, thus it is
necessary to use the appropriate floating point calculation functions.
If this is not done, those functions operate merely on integers, which
is not correct.
Signed-off-by: Max Reitz <max@tyndur.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Avoid these warnings from clang analyzer:
/src/qemu/target-i386/kvm.c:772:5: warning: Value stored to 'cwd' is never read
cwd = swd = twd = 0;
/src/qemu/target-i386/kvm.c:772:11: warning: Although the value stored to 'swd' is used in the enclosing expression, the value is never actually read from 'swd'
cwd = swd = twd = 0;
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The (x << (cl - 1)) quantity is only used if CL != 0. Move the
computation of that quantity nearer its use.
This avoids the creation of undefined TCG operations when the
constant propagation optimization proves that CL == 0, and thus
CL-1 is outside the range [0-wordsize).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: malc <av1474@comtv.ru>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The second if statement should consider the original al register value,
and not the new one.
Signed-off-by: Boris Figovsky <boris.figovksy@ravellosystems.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
