Commit Graph

1129 Commits

Author SHA1 Message Date
Markus Armbruster
b69c3c21a5 qdev: Unrealize must not fail
Devices may have component devices and buses.

Device realization may fail.  Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).

When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far.  If any of these unrealizes
failed, the device would be left in an inconsistent state.  Must not
happen.

device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.

Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back?  We'd have to
re-realize, which can fail.  This design is fundamentally broken.

device_set_realized() does not roll back at all.  Instead, it keeps
unrealizing, ignoring further errors.

It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.

bus_set_realized() does not roll back either.  Instead, it stops
unrealizing.

Fortunately, no unrealize method can fail, as we'll see below.

To fix the design error, drop parameter @errp from all the unrealize
methods.

Any unrealize method that uses @errp now needs an update.  This leads
us to unrealize() methods that can fail.  Merely passing it to another
unrealize method cannot cause failure, though.  Here are the ones that
do other things with @errp:

* virtio_serial_device_unrealize()

  Fails when qbus_set_hotplug_handler() fails, but still does all the
  other work.  On failure, the device would stay realized with its
  resources completely gone.  Oops.  Can't happen, because
  qbus_set_hotplug_handler() can't actually fail here.  Pass
  &error_abort to qbus_set_hotplug_handler() instead.

* hw/ppc/spapr_drc.c's unrealize()

  Fails when object_property_del() fails, but all the other work is
  already done.  On failure, the device would stay realized with its
  vmstate registration gone.  Oops.  Can't happen, because
  object_property_del() can't actually fail here.  Pass &error_abort
  to object_property_del() instead.

* spapr_phb_unrealize()

  Fails and bails out when remove_drcs() fails, but other work is
  already done.  On failure, the device would stay realized with some
  of its resources gone.  Oops.  remove_drcs() fails only when
  chassis_from_bus()'s object_property_get_uint() fails, and it can't
  here.  Pass &error_abort to remove_drcs() instead.

Therefore, no unrealize method can fail before this patch.

device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool().  Can't drop @errp there, so pass
&error_abort.

We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors.  Pass &error_abort instead.

Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.

One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().

Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15 07:08:14 +02:00
Markus Armbruster
d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Peter Maydell
a2261b2754 trivial patches (20200504)
Silent static analyzer warning
 Remove dead assignments
 Support -chardev serial on macOS
 Update MAINTAINERS
 Some cosmetic changes
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl6wOI4SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748p7UQAIFSNN0FrDV+K7i8qqq0X+JrS+dNOHNm
 DSpOf8IaGm/BezzL6XirXBVpFxg9iB5DQVLsjP1kUggO7rbBO0blx5H5eOPhnXZj
 xg60kLN16ty7NZ/WPS1G9jF4nDsjz0ZUtCXb0OXsuGJIOrsmN2r/lxdJwcjHZaqJ
 RzbcCSFXlvL0g7mOakJinMJH5r/nWCiUoEYsikhP10DcvuSBoCnjr+LYV6Ef02G0
 Y5lgKN2G0EAMgWTJaL3gIF27zS8QLDNll+eO+PIU5K4yo75/wRCKr4e3PpErZlf6
 B+hCAAPnXCpDKw+8sK2z+9OZXUGe1hQ8LHNgNNM921C66f+vLLXpIDTAECihM4K4
 0wThYlFDwT4j+PMHFNlzIobGMtb33ui8m40lepMt/YOVFqY4tr8u3MLhHkVDo2+8
 sNuOOWLXAoFOYyRqgTeVJvZvMUFQqtDiftghw1BR55TyIpDWjvLYRqae5CI+MGXs
 6YylZVHGzVjMVptxvivvIQ735Nq8LaKq7N8Cb7uvcbRaCki39BsxXVPZx4p6NdwN
 dMndUOz/y75dNlRMDjK8l/oRFPJa/p1Yz8mZhl0uVOO6JeJhBwYmk+WkQ7g/GHZb
 Rx15HnVWRu6C/Icbw4kqZYyqrgl5lykS8aAWURePdpjzKY77rY1H71FesMhjifRN
 ZGgfUdWI88M4
 =ibgH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging

trivial patches (20200504)

Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes

# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
  hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
  hw/timer/stm32f2xx_timer: Remove dead assignment
  hw/gpio/aspeed_gpio: Remove dead assignment
  hw/isa/i82378: Remove dead assignment
  hw/ide/sii3112: Remove dead assignment
  hw/input/adb-kbd: Remove dead assignment
  hw/i2c/pm_smbus: Remove dead assignment
  blockdev: Remove dead assignment
  block: Avoid dead assignment
  Compress lines for immediate return
  chardev: Add macOS to list of OSes that support -chardev serial
  MAINTAINERS: Update Keith Busch's email address
  elf_ops: Don't try to g_mapped_file_unref(NULL)
  hw/mem/pc-dimm: Fix line over 80 characters warning
  hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
  MAINTAINERS: Mark the LatticeMico32 target as orphan
  timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
  display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
  scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-05 14:03:28 +01:00
Peter Maydell
5c7c46fea9 Pull request
v2:
  * Fixed stray slirp submodule change [Peter]
 
 Fixes for the lock guard macros, code conversions to the lock guard macros, and
 support for selecting fuzzer targets with argv[0].
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl6wMI8ACgkQnKSrs4Gr
 c8g36Af/fgEhGUVq3S3U+7pupdhFwTJD3oXrayPf/ZlFkACx5vXmV/X7gTMwc7Lw
 nGPEP3Xi+6be3Ca+4eZ6P2J91p1oz6uOmWHajMM9uc9i0yLim+6GsCbUcRDbVZF4
 FRd9dHIqK8I/5yeKSlC1RVdAETPaRTE0XL/kugxOZDlmdhDrD7kpaZmBsCjOEH4E
 +oBEweakkaLwX0yk8zo6tfw4qxsC3wb1gtmQvCE2MdFhASIxdgYzdYXkZnLa+7dy
 fkWLk1F4bRKUyjwoW6EBFGDAGKM5u22tKJOvXwtMOPKMVHm1D36MWau+5oqVMMrs
 JwxHAfPSWJhN1laCykm6ltwo+B9g2w==
 =hRXC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

v2:
 * Fixed stray slirp submodule change [Peter]

Fixes for the lock guard macros, code conversions to the lock guard macros, and
support for selecting fuzzer targets with argv[0].

# gpg: Signature made Mon 04 May 2020 16:11:11 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  lockable: Replace locks with lock guard macros
  lockable: replaced locks with lock guard macros where appropriate
  lockable: fix __COUNTER__ macro to be referenced properly
  fuzz: select fuzz target using executable name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04 20:35:59 +01:00
Daniel Brodsky
6e8a355de6 lockable: replaced locks with lock guard macros where appropriate
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end

Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04 16:07:43 +01:00
Anthoine Bourgeois
15138b5e6f virtio-vga: fix virtio-vga bar ordering
With virtio-vga, pci bar are reordered. Bar #2 is used for compatibility
with stdvga. By default, bar #2 is used by virtio modern io bar.
This bar is the last one introduce in the virtio pci bar layout and it's
crushed by the virtio-vga reordering. So virtio-vga and
modern-pio-notify are incompatible because virtio-vga failed to
initialize with this option.

This fix sets the modern io bar to the bar #5 to avoid conflict.

Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Message-Id: <20200422215455.10244-1-anthoine.bourgeois@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-04 10:25:02 -04:00
Simran Singhal
b3ac2b94cd Compress lines for immediate return
Compress two lines into a single line if immediate return statement is found.

It also remove variables progress, val, data, ret and sock
as they are no longer needed.

Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('

Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;

Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 14:43:22 +02:00
Chen Qun
fd1c220395 display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
Clang static code analyzer show warning:
  hw/display/blizzard.c:940:9: warning: Value stored to 'data' is never read
        data >>= 5;
        ^        ~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200325025919.21316-3-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04 11:17:27 +02:00
Markus Armbruster
ee29f6e92d bochs-display: Fix vgamem=SIZE error handling
bochs_display_realize() rejects out-of-range vgamem.  The error
handling is broken:

    $ qemu-system-x86_64 -S -display none -monitor stdio
    QEMU 4.2.93 monitor - type 'help' for more information
    (qemu) device_add bochs-display,vgamem=1
    Error: bochs-display: video memory too small
    (qemu) device_add bochs-display,vgamem=1
    RAMBlock "0000:00:04.0/bochs-display-vram" already registered, abort!
    Aborted (core dumped)

Cause: bochs_display_realize() neglects to bail out after setting the
error.  Fix that.

Fixes: 765c942908
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200422130719.28225-8-armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2020-04-29 08:01:52 +02:00
BALATON Zoltan
ac2071c379 ati-vga: Fix checks in ati_2d_blt() to avoid crash
In some corner cases (that never happen during normal operation but a
malicious guest could program wrong values) pixman functions were
called with parameters that result in a crash. Fix this and add more
checks to disallow such cases.

Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200406204029.19559747D5D@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-04-07 09:25:23 +02:00
Philippe Mathieu-Daudé
6111a0c0ed hw/arm/bcm283x: Correct the license text
The license is the 'GNU General Public License v2.0 or later',
not 'and':

  This program is free software; you can redistribute it and/ori
  modify it under the terms of the GNU General Public License as
  published by the Free Software Foundation; either version 2 of
  the License, or (at your option) any later version.

Fix the license comment.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-23 17:22:30 +00:00
Philippe Mathieu-Daudé
b9fc4f6e62 hw/display: Let devices own the MemoryRegion they create
Avoid orphan memory regions being added in the /unattached QOM
container.

This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:48 +01:00
Philippe Mathieu-Daudé
52013bcea0 hw/display: Use memory_region_init_rom() with read-only regions
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:46 +01:00
Gerd Hoffmann
f872c76296 stdvga+bochs-display: add dummy mmio handler
The bochs-display mmio bar has some sub-regions with the actual hardware
registers.  What happens when the guest access something outside those
regions depends on the archirecture.  On x86 those reads succeed (and
return 0xff I think).  On risc-v qemu aborts.

This patch adds handlers for the parent region, to make the wanted
behavior explicit and to make things consistent across architectures.

v2:
 - use existing unassigned_io_ops.
 - also cover stdvga.

Cc: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200309100009.17624-1-kraxel@redhat.com
2020-03-16 12:40:47 +01:00
Chen Qun
488a0ddae2 display/exynos4210_fimd: Remove redundant statement in exynos4210_fimd_update()
Clang static code analyzer show warning:
hw/display/exynos4210_fimd.c:1313:17: warning: Value stored to 'is_dirty' is never read
                is_dirty = false;

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-9-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Chen Qun
4e34d82eee display/pxa2xx_lcd: Remove redundant statement in pxa2xx_palette_parse()
Clang static code analyzer show warning:
hw/display/pxa2xx_lcd.c:596:9: warning: Value stored to 'format' is never read
        format = 0;
        ^        ~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Gerd Hoffmann
44b5c1ebfa qxl: map rom r/o
Map qxl rom read-only into the guest, so the guest can't tamper with the
content.  qxl has a shadow copy of the rom to deal with that, but the
shadow doesn't cover the mode list.  A privilidged user in the guest can
manipulate the mode list and that to trick qemu into oob reads, leading
to a DoS via segfault if that read access happens to hit unmapped memory.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200225055920.17261-2-kraxel@redhat.com
2020-03-02 08:24:36 +01:00
Anton V. Boyarshinov
cd8fef8d4b Arithmetic error in EDID generation fixed
To calculate screen size in centimeters we should calculate:
pixels/dpi*2.54
but not
pixels*dpi/2540

Using wrong formula we actually get 65 DPI and very small fonts.

Signed-off-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Message-id: 20200226122054.366b9cda@table.localdomain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-02 08:20:30 +01:00
Paolo Bonzini
9e264985ff Merge branch 'exec_rw_const_v4' of https://github.com/philmd/qemu into HEAD 2020-02-25 13:41:48 +01:00
Peter Maydell
7afee874f1 Fix memory leak with fdt
cosmetic change in code and logs
 update mailmap
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl5NCtwSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748GMMQAIX/UNIKHIIYUYM/5mrBQjQzk/OTZ0F8
 7GqsYkOJ3U189iZsbMTCkCo3uQjP1+qKBRGhEq/hWozItTpvKwwfg6V5e8/8UUYn
 CREUZVBnSj2GcBHCSyK0+h6carG/ThuRc5m6QFPG4OMKDR6FTbvleeUTWhgPAJ3t
 /jhIj9+MlKYFJ9VmMRYs47ZMGoX0KDX1m9L6fx7pllwHM3DbFF5L1GieHrdnnDYu
 7az+KZsFkvIu2yuyonzIApitriRjPmb5DM2udxRoX2ZxhkZU0OARzQVxfx+rsilJ
 puuD1mc8PwQTbdAFi0y/5IvL7OkX7lV09cxnBk4wLoxKsJFn+2F0YN+iMVkcY+B3
 BKr2uwikvolb5BQgfpZg7bJboHABuHy+PGBiX3EC/F93k11bIIF/XM2bEz/Kwt3K
 cY7DLDxEQfEcyuHeFdmT23qE0xyrQytkgIU6Vefp2YuOvpeNNVC7KNnrnIfo32dt
 TvoRFCoW2s3ALevoBHBHmbbZzFGjvBV2377kiA8yDTb0aHsnzXeptVYojFVG76Td
 qpy6e/OWnhh08FB4HTTeWx2VlHMUjC6XiYsbcxvMcmKLd5gNh+fQ5HNYKXseyJ7J
 I0AYCH6l9lYKFp0/NxzW6m8bPso9m5IxltPy+5Y6HaXjGg6RJgwx2aM/U+GYkrY6
 2oN84MPK/PZT
 =HsOM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Fix memory leak with fdt
cosmetic change in code and logs
update mailmap

# gpg: Signature made Wed 19 Feb 2020 10:15:56 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/xtensa/xtfpga:fix leak of fdevice tree blob
  hw/nios2:fix leak of fdevice tree blob
  hw/net/rocker: Report unimplemented feature with qemu_log_mask(UNIMP)
  hw/block/pflash_cfi02: Remove unneeded variable assignment
  hw/display/qxl: Remove unneeded variable assignment
  contrib/rdmacm-mux: Remove superfluous semicolon
  tests/qtest/libqos/qgraph: Remove superfluous semicolons
  target/i386/whpx: Remove superfluous semicolon
  ui/input-barrier: Remove superfluous semicolon
  hw/vfio/display: Remove superfluous semicolon
  hw/scsi/esp: Remove superfluous semicolon
  hw/m68k/next-cube: Remove superfluous semicolon
  hw/arm/xlnx-versal: Remove superfluous semicolon
  audio/alsaaudio: Remove superfluous semicolons
  scripts/checkpatch.pl: Detect superfluous semicolon in C code
  Report stringified errno in VFIO related errors
  mailmap: Add entry for Yu-Chen Lin

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-20 16:51:19 +00:00
Philippe Mathieu-Daudé
85eb7c18ee Let cpu_[physical]_memory() calls pass a boolean 'is_write' argument
Use an explicit boolean type.

This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-20 14:47:08 +01:00
Philippe Mathieu-Daudé
0eeef0a4d3 Remove unnecessary cast when using the cpu_[physical]_memory API
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-20 14:47:08 +01:00
Philippe Mathieu-Daudé
eb9b2ee8f6 hw/display/artist: Remove dead code (CID 1419388 & 1419389)
Coverity reports:

  *** CID 1419388:  Control flow issues  (DEADCODE)
  /hw/display/artist.c: 739 in draw_line_xy()
  733         if (endy < 0) {
  734             endy = 0;
  735         }
  736
  737
  738         if (endx < 0) {
  >>>     CID 1419388:  Control flow issues  (DEADCODE)
  >>>     Execution cannot reach this statement: "return;".
  739             return;
  740         }
  741
  742         if (endy < 0) {
  743             return;
  744         }

  *** CID 1419389:  Control flow issues  (DEADCODE)
  /hw/display/artist.c: 743 in draw_line_xy()
  737
  738         if (endx < 0) {
  739             return;
  740         }
  741
  742         if (endy < 0) {
  >>>     CID 1419389:  Control flow issues  (DEADCODE)
  >>>     Execution cannot reach this statement: "return;".
  743             return;
  744         }
  745
  746         trace_artist_draw_line(startx, starty, endx, endy);
  747         draw_line(s, startx, starty, endx, endy, false, -1, -1);
  748     }

Fixes: Covertiy CID 1419388 and 1419389 (commit 4765384ce3)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
b0f6455fea hw/display/artist: Avoid drawing line when nothing to display
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
0814343ce2 hw/display/artist: Delay some variables initialization
We want to have an early exit path. Delay some initializations
before the variables are used.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
6c69f9c48e hw/display/artist: Remove pointless initialization
We are initializating incy inconditionally:

    if (y1 <= y2) {
        incy = 1;
    } else {
        incy = -1;
    }

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
5646bca36e hw/display/artist: Move trace event to draw_line()
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-18 11:21:47 -08:00
Philippe Mathieu-Daudé
380e6d8119 hw/display/qxl: Remove unneeded variable assignment
Fix warning reported by Clang static code analyzer:

  hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
      uint32_t orig_io_port = io_port;
               ^~~~~~~~~~~~   ~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-18 20:20:49 +01:00
Gerd Hoffmann
ed71c09ffd qxl: introduce hardware revision 5
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.

Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
2020-02-13 08:31:40 +01:00
Thomas Huth
3ab5a6ece5 hw/*/Makefile.objs: Move many .o files to common-objs
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04 09:00:57 +01:00
Peter Maydell
d4aceb2eb7 hw/display/qxl.c: Use trace_event_get_state_backends()
The preferred way to test whether a trace event is enabled is to
use trace_event_get_state_backends(), because this will give the
correct answer (allowing expensive computations to be skipped)
whether the trace event is compile-time or run-time disabled.
Convert the old-style direct use of TRACE_FOO_ENABLED.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200120151142.18954-4-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-4-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30 21:33:50 +00:00
Sven Schnelle
4765384ce3 hppa: Add emulation of Artist graphics
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.

Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-27 10:49:51 -08:00
Marc-André Lureau
4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Philippe Mathieu-Daudé
ada4406516 hw/display/tcx: Add missing fall through comments
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:

  hw/display/tcx.c: In function ‘tcx_dac_writel’:
  hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
    453 |             s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
        |             ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
  hw/display/tcx.c:454:9: note: here
    454 |         default:
        |         ^~~~~~~
  hw/display/tcx.c: In function ‘tcx_dac_readl’:
  hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
    412 |         s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
        |         ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
  hw/display/tcx.c:413:5: note: here
    413 |     default:
        |     ^~~~~~~
  cc1: all warnings being treated as errors

Give a hint to GCC by adding the missing fall through comments.

Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:07 +01:00
Peter Xu
1df2c9a26f migration: Define VMSTATE_INSTANCE_ID_ANY
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID.  Previously it was hard coded
as -1 instead of this macro.  It helps to change this default value in
the follow up patches.  No functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-20 09:10:23 +01:00
Marc-André Lureau
0ed40f16a1 sm501: make SerialMM a child, export chardev property
Embed the SerialMM sybus device, and re-export its "chardev" property.
That way, we can get rid of PROP_PTR "chr-state" and better track
devices relationship.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07 17:24:29 +04:00
Philippe Mathieu-Daudé
7aca3782d9 hw/display/sm501: Always map the UART0
The SM501 is a Mobile Multimedia Companion Chip with 2 UARTs.
This model only implements the first UART. Being part of the
chipset, the UART block is always mapped in memory, regardless
of whether we provide a chardev backend.

Since commit 12051d82f, qemu_chr_fe_init() accepts a NULL chardev.
Let's remove the chardev check and always map the UART in the
chipset memory.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191122133623.13004-1-philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07 16:06:59 +04:00
Peter Maydell
81e6a7345a console: screendump improvements
Hi,
 
 The following patches have been extracted from the "[PATCH v6 00/25]
 monitor: add asynchronous command type", as they are
 reviewable/mergeable independantly.
 
 They introduce some internal API changes, and fix
 qemu_open()/qemu_close()/unlink() misusages which should be quite
 harmless.
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAl4PBGccHG1hcmNhbmRy
 ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5XtXD/4rqC3qSO62L2vYzi7V
 38unjXNMAETqr/dplFuMKapqjZZaRP+yjx2/u3xcXvixLrzlbNOy9vwNy0T0fkRw
 og8bZM8vOgMP8jCfXFEysAsXmTtiJ2tOKlKURedqQLLP4JNz4vEXkmtP4OAidjcR
 AoNEg6uqVQJpidNhN+3+w3SNYlsL4JpXYy8iZ2PPCnlvLBkRc7EFWVvwWvCdpCgL
 a1pMamqbbnxNIwxVe232gpXAbKXzmGCRIvwB7ZIV+USTF3IUH06bIGH4WPFAsD2w
 7wxOxV7G4z16aYmoMHwLP9RyUqb8K4Cb00qOf8jEF04tVAFwCp1czfOYQ6lrO0Qc
 1RU6OaFsHUlVUxu0OHBfIz5tXmwtG97tlN8Oglu8ujqSkhbH0u3uythaid23UEfg
 dF+jqXF1Ex93KkSoqVnT76UqJchdZU+BXYJt3Ir+X6nro3FvAwQB2c4KFAlVOo1w
 trc3NqWNZvxZ6N1LI8cG15d0EfdKG8rL5p49MtgfUNZk5XNqAul+huFr2UAEFykC
 +pnmTIYlc1mrZUZXX6h5Cokj65zYIEYuqK/2ZS6uUC8oWvH8aMo1b5kPxqrvisCl
 TWmXnh5j9k+hhj5d/X7TnR9TGJQiljj4zvfUrYTIG6hKAoEbZIocaPjtNSaflF2P
 3SVhe4g7QkQSJhdq6dpDfHUEPA==
 =aSgS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/elmarco/tags/screendump-pull-request' into staging

console: screendump improvements

Hi,

The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.

They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.

# gpg: Signature made Fri 03 Jan 2020 09:07:51 GMT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/screendump-pull-request:
  screendump: use qemu_unlink()
  osdep: add qemu_unlink()
  screendump: replace FILE with QIOChannel and fix close()/qemu_close()
  object: add g_autoptr support
  ui: add pixman image g_autoptr support
  ppm-save: pass opened fd
  console: add graphic_hw_update_done()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06 14:51:51 +00:00
Peter Maydell
4affd48bfe vga: two little bugfixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJd/GTMAAoJEEy22O7T6HE4n1gP/iVAD4R03r683m9TE1FO+gTx
 qDKeDVgCrWcoMhJZ6VfwH/32Uf31yGiRJvUY5K9MqaR7CKmmiRQrz7Kas7A7M2Qz
 MKLQHr1ylgppBDUfEMdNOf+Wc8oC7ydUPtDH5rBP4i4tUPkSCQoxVeCLLHF1FANg
 L+WN3Oj1eMYdWzFSxQ5TokbSZMvgAaNtLqltz9pCxAISDp1iz5DYWEHCHtXVtnmg
 2w5hg+t3E4wtS1In+8QTwWwvk7Q/5RgjwbGeGhTmNr+YW07eJ1puTwNsoLRb04hK
 Y2IUcZ6fyZsWpCaUceAeqSdN/It0S+Kffsr9HyHh2rIEAUowFbwjZonTMHKE0cLP
 GdfGfUmRd0DPtcZKBEDwOHh8rL2w/MJN5+mC//lZXC4CpgYbFm0KK0SHcncqnbjW
 3D217zMM5gOD2gwNEq5bYlUSmCYYBwBV6DahC38QoYLW1hDR+ZN3/GDLkActD4qt
 g57eMw4ooPTMNF3XDsjWudTUOSSyJYbBM9nOOiO7vq+gy4HY/hnkxrs20XQsuxjP
 estF360PWX3BuFu6tLqZiWueKgZIcLkzlcNWR65LYv195WhLnGdOxuHcWeyHMkTH
 xe8KmCGqwvrQyWyF4GZCvI3+vuRcCKFOUHMgnOx5+3irsgvFtmNNI7GPOj/P+V8S
 Ba9DKC3TiAb2CJQ8Z9ob
 =+HfT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20191220-pull-request' into staging

vga: two little bugfixes.

# gpg: Signature made Fri 20 Dec 2019 06:06:04 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20191220-pull-request:
  display/bochs-display: fix memory leak
  vhost-user-gpu: Drop trailing json comma

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-03 14:29:42 +00:00
Marc-André Lureau
4d6316218b console: add graphic_hw_update_done()
Add a function to be called when a graphic update is done.

Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.

(note: this is preliminary work for asynchronous screendump support)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-02 13:54:57 +04:00
Cameron Esfahani
0d82411d0e display/bochs-display: fix memory leak
Fix memory leak in bochs_display_update().  Leaks 304 bytes per frame.

Fixes: 33ebad5405
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <d6c26e68db134c7b0c7ce8b61596ca2e65e01e12.1576013209.git.dirty@apple.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-12-20 07:05:46 +01:00
Paolo Bonzini
e2328a11bd vga: cleanup mapping of VRAM for non-PCI VGA
vga_init_vbe is now used only from ISA VGA cards.  Since the alias is
not needed anymore, remove it (effectively reverting commit 8294a64d7f,
"vga: fix vram double-mapping with -vga std and -M pc-0.12", 2012-05-29)
and the now unused vbe_mapped field of VGACommonState.  The function now
consists of a single memory_region_add_subregion call, so we can inline
it; this avoids incorrect usage from PCI cards.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Based-on: <05af415a-5058-98b4-4a12-9d093a30b1e3@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18 02:34:13 +01:00
Thomas Huth
97d8381543 hw/display: Remove "rombar" hack from vga-pci and vmware_vga
Now that the old pc-0.x machine types have been removed, we do not need
the old "rombar" hacks anymore.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18 02:34:12 +01:00
Filip Bozuta
68fa5f552a mips: jazz: Renovate coding style
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
    hw/mips/mips_jazz.c
    hw/display/jazz_led.c
    hw/dma/rc4030.c

All these mips jazz machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.

Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-2-git-send-email-Filip.Bozuta@rt-rk.com>
2019-12-16 13:04:46 +01:00
Sai Pavan Boddu
0f6ed883e7 display: xlnx_dp: Provide sufficient bytes for silent audio channel
Fill the audio channel with required number of bytes to cover the
elapsed time. This prevents rate control reset, and avoids debug prints
like below

log:
	Resetting rate control (65692 samples)
	...
	Resetting rate control (65721 samples)
	...

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1573833408-2388-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-11-21 07:12:28 +01:00
Laurent Vivier
8ac919a065 hw/m68k: add Nubus macfb video card
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.

It is accessed as a framebuffer but the color palette can be set.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
2019-10-28 19:06:49 +01:00
Philippe Mathieu-Daudé
e55a8b3790 hw/arm/bcm2835_peripherals: Name various address spaces
Various address spaces from the BCM2835 are reported as
'anonymous' in memory tree:

  (qemu) info mtree

  address-space: anonymous
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: anonymous
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  [...]

Since the address_space_init() function takes a 'name' argument,
set it to correctly describe each address space:

  (qemu) info mtree

  address-space: bcm2835-mbox-memory
    0000000000000000-000000000000008f (prio 0, i/o): bcm2835-mbox
      0000000000000010-000000000000001f (prio 0, i/o): bcm2835-fb
      0000000000000080-000000000000008f (prio 0, i/o): bcm2835-property

  address-space: bcm2835-fb-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-property-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

  address-space: bcm2835-dma-memory
    0000000000000000-00000000ffffffff (prio 0, i/o): bcm2835-gpu
      0000000000000000-000000003fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      0000000040000000-000000007fffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      000000007e000000-000000007effffff (prio 1, i/o): alias bcm2835-peripherals @bcm2835-peripherals 0000000000000000-0000000000ffffff
      0000000080000000-00000000bfffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff
      00000000c0000000-00000000ffffffff (prio 0, i/o): alias bcm2835-gpu-ram-alias[*] @ram 0000000000000000-000000003fffffff

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190926173428.10713-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15 18:09:05 +01:00
Gerd Hoffmann
aab0e2a661 ati: use vga_read_byte in ati_cursor_define
This makes sure reads are confined to vga video memory.

v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.

Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
2019-09-19 10:37:46 +02:00
Gerd Hoffmann
145e543eb3 vga: move access helpers to separate include file
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-2-kraxel@redhat.com
2019-09-19 10:37:46 +02:00
Thomas Huth
e3355a0ca2 m68k: Add NeXTcube framebuffer device emulation
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at

 https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c

and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-09-07 08:30:34 +02:00
Peter Maydell
e1391340c7 vga: a collection of ati fixes/improvements.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdXkykAAoJEEy22O7T6HE4ov4P/2c6oOaDWoD1nPHpVCh8ygQi
 XttAd46/WObe9UG2mqA5Ds91e5cbqilgvAXCfDO9OsmoceEdLwrsbrJf+98Em92t
 Fn+6v8ywGo6YUdvqzvYFBEMQjtd8lVFEnUf3DXrf4OkMkuhJ3FVwTvhrDXr+6MJZ
 4nDj2cSltXvjU9Z+e/7T0chGkqOPkPTg84wMhYyjAFzjOdxSmkeOe5RTRHgaMD/t
 96oQi/tOdk60g/DxZSGA1Hqm2kNbzpi5ZFCuvFPum3rJRpErt/BcxCPNYAOAbbq0
 bjcF1gmAW2RVDtqJyQHiYhm6AAc0FPuFh4otJIgG9HXSevOOq3ijQRZP7xGVhpRF
 Xy2TuWxLuxz298W59/pYcJWPiNpGBCgWeejB10B7KwTegpe51boDLzmqFTN1TOVa
 sgKPr6QUu0BJHwgCxI/Jm79TkBHO54gVXGWE1SNUCxjMpR4VxcvKUM8pzE7pRT7B
 Q6fdqKG+WTeEsWv7aa9kHTWAf9lbsb2zL+9EOgD/tz5s0uUuU/HBIkk0JFC+h+7r
 eZxD49EtOSjteikkE4qqP0iPgH+DOCEASJRFjEe9JoilXWxmhaJw3e4x3V8ey1AK
 Xrro5VOmC+czjCi/gDnx3REB7kwkwEJnBLCGSgCruSPYgEvCA4BSMVtCwNhOEUx1
 lU4IqcpArtrw0B+ci3c2
 =xT8w
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190822-pull-request' into staging

vga: a collection of ati fixes/improvements.

# gpg: Signature made Thu 22 Aug 2019 09:04:52 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190822-pull-request:
  ati-vga: Implement dummy VBlank IRQ
  ati-vga: Add limited support for big endian frame buffer aperture
  ati-vga: Attempt to handle CRTC offset not exact multiple of stride
  ati-vga: Fix hardware cursor image offset
  ati-vga: Fix cursor color with guest_hwcursor=true
  ati-vga: Fix GPIO_MONID register write
  ati-vga: Add some register definitions for debugging
  ati-vga: Add registers for getting apertures

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 16:13:17 +01:00
BALATON Zoltan
b7105d280c ati-vga: Implement dummy VBlank IRQ
The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-22 10:04:20 +02:00
Philippe Mathieu-Daudé
8a9224a250 hw/display: Compile various display devices as common object
Various display devices are not target-specific and can
be compiled once for all the targets.
After this commit, the 'make world' target is reduced by
54 objects

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190812113739.16587-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 13:17:22 +02:00
Philippe Mathieu-Daudé
ea2b7c9faa hw/display/sm501: Remove unused include
The "cpu.h" include makes devices target-specific. Since it
is not used, remove it, so the device become generic (we can
now compile it once for all targets).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190812113739.16587-2-philmd@redhat.com>
[lv: fix conflict with 650d103d3e
     ("Include hw/hw.h exactly where needed")]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21 11:05:40 +02:00
BALATON Zoltan
8bb9a2b26d ati-vga: Add limited support for big endian frame buffer aperture
Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
c026350a84 ati-vga: Attempt to handle CRTC offset not exact multiple of stride
MacOS uses non-0 offset so it needs this and the resulting
vbe_start_addr seems correct but picture is still broken with OpenBIOS
after FCode runs but that maybe due to firmware problems now. After
boot, picture is now correct.

It also occured to me that these CRTC regs are also present in VGA so
I wonder if they should be shared in case some drivers try to poke
them via VGA regs or these are a separate set of regs for extended
mode. Added a comment noting this but drivers I've tried so far
program the card accessing ati regs so I did not attempt to change it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 1c6fce457ef7e6f889e38dc0423791be92310a62.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
747d7ad231 ati-vga: Fix hardware cursor image offset
The crtc_offset is not needed, cur_offset is relative to the start of
vram not the start of displayed area. This fixes broken pointer image
with MacOS that uses non-0 crtc_offset.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e6acb1fa3ca980dc948045443e5986e2aa79bf7c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
50bc6af55e ati-vga: Fix cursor color with guest_hwcursor=true
Fixes: a38127414b
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: d99f9e07923a74932dbb15e93dd50aa8d2816b19.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
006388a8c7 ati-vga: Fix GPIO_MONID register write
Also update bitbang_i2c state when output bits are changed while
enable bits are set. This fixes EDID access by the ATI FCode ROM.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 292e70a92b7fbfd9a4120d433dbdcfda4e5f6c3c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
df1e4cf4e7 ati-vga: Add some register definitions for debugging
Add names for AMCGPIO regs to make it easier to identify these in
trace output. This is where rage128p has the DDC from the DVI port
among others but because we don't implement the flat panel controller
we don't want to connect an EDID here to make sure drivers use the VGA
output instead. But since these are often probed by drivers it helps
to see what happens by logging these registers by name.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 31ff69ca6959d090869907774faa1af7d2c02b2b.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
BALATON Zoltan
1d8d4d866c ati-vga: Add registers for getting apertures
Some drivers (e.g. Linux radeon drm and MacOS) access these to find
apertures to access card. Try to implement these but not sure these
are correct yet.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: b2df13655feecd63c0049ec45fd87d1026f67091.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 10:56:27 +02:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
2f780b6a91 sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).

Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry.  Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there.  Drop the now
superfluous includes of sysemu/sysemu.h from headers.

Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
46517dd497 Include sysemu/sysemu.h a lot less
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()".  This is a bad idea:
hw/qdev-core.h is widely included.

Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.

Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800.  A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d484205210 Include exec/memory.h slightly less
Drop unnecessary inclusions from headers.  Downgrade a few more to
exec/hwaddr.h.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
ca77ee28e0 Include migration/qemu-file-types.h a lot less
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).

The culprit is again hw/hw.h, which supposedly includes it for
convenience.

Include migration/qemu-file-types.h only where it's needed.  Touching
it now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
71e8a91585 Include sysemu/reset.h a lot less
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

The main culprit is hw/hw.h, which supposedly includes it for
convenience.

Include sysemu/reset.h only where it's needed.  Touching it now
recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
1b53ecd909 memory: Fix type of IOMMUMemoryRegionClass member @parent_class
TYPE_IOMMU_MEMORY_REGION is a direct subtype of TYPE_MEMORY_REGION.
Its instance struct is IOMMUMemoryRegion, and its first member is a
MemoryRegion.  Correct.  Its class struct is IOMMUMemoryRegionClass,
and its first member is a DeviceClass.  Wrong.  Messed up when commit
1221a47467 introduced the QOM type.  It even included hw/qdev-core.h
just for that.

TYPE_MEMORY_REGION doesn't bother to define a class struct.  This is
fine, it simply defaults to its super-type TYPE_OBJECT's class struct
ObjectClass.  Changing IOMMUMemoryRegionClass's first member's type to
ObjectClass would be a minimal fix, if a bit brittle: if
TYPE_MEMORY_REGION ever acquired own class struct, we'd have to update
IOMMUMemoryRegionClass to use it.

Fix it the clean and robust way instead: give TYPE_MEMORY_REGION its
own class struct MemoryRegionClass now, and use it for
IOMMUMemoryRegionClass's first member.

Revert the include of hw/qdev-core.h, and fix the few files that have
come to rely on it.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190812052359.30071-5-armbru@redhat.com>
2019-08-16 13:31:51 +02:00
Gerd Hoffmann
5e7bcdcfe6 display/bochs: fix pcie support
Set QEMU_PCI_CAP_EXPRESS unconditionally in init(), then clear it in
realize() in case the device is not connected to a PCIe bus.

This makes sure the pci config space allocation is big enough, so
accessing the PCIe extended config space doesn't overflow the pci
config space buffer.

PCI(e) config space is guest writable.  Writes are limited by
write mask (which probably is also filled with random stuff),
so the guest can only flip enabled bits.  But I suspect it
still might be exploitable, so rather serious because it might
be a host escape for the guest.  On the other hand the device
is probably not yet in widespread use.

(For a QEMU version without this commit, a mitigation for the
bug is available: use "-device bochs-display" as a conventional pci
device only.)

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190812065221.20907-2-kraxel@redhat.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-12 16:36:41 +01:00
Dr. David Alan Gilbert
dd56040d29 Revert "hw: report invalid disable-legacy|modern usage for virtio-1-only devs"
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-29 16:57:27 -04:00
Philippe Mathieu-Daudé
a09ef50404 hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
In the previous commit we fixed a crash when the guest read a
register that pop from an empty FIFO.
By auditing the repository, we found another similar use with
an easy way to reproduce:

  $ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S
  QEMU 4.0.50 monitor - type 'help' for more information
  (qemu) xp/b 0xfd4a0134
  Aborted (core dumped)

  (gdb) bt
  #0  0x00007f6936dea57f in raise () at /lib64/libc.so.6
  #1  0x00007f6936dd4895 in abort () at /lib64/libc.so.6
  #2  0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431
  #3  0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667
  #4  0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439
  #5  0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569
  #6  0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420
  #7  0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447
  #8  0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385
  #9  0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423
  #10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436
  #11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131
  #12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723
  #13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795
  #14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082

Fix by checking the FIFO is not empty before popping from it.

The datasheet is not clear about the reset value of this register,
we choose to return '0'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190709113715.7761-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-15 14:17:03 +01:00
BALATON Zoltan
146dd326c1 ati-vga: Fix setting offset together with pitch for r128pro
Turns out my last fix to this broke one case for Rage 128 Pro so
revert that part of previous patch. This now fixes the remaining
rendering problems for MorphOS which now can produce picture with
-device ati-vga (although it may not be optimised yet and video
overlay emulation is still known to be missing).

Fixes: 866ad5f5ff
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: da33261a841755691f698db8190c868df0c0d3ae.1562276605.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
584acf34cb ati-vga: Fix reverse bit blts
The pixman library only supports blts with left to right, top to
bottom order but the ATI VGA engine can also do different directions.
Fix support for these via a temporary buffer for now. This fixes
rendering issues related to such blts (such as moving windows) but
some other glitches still remain.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e21855faaeb30d7b1771f084f283f6a30bedb1a3.1562227303.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
a38127414b ati-vga: Fix frame buffer endianness for big endian target
The extended mode frame buffer should be little endian even when
emulating big endian machine (such as PPC). This fixes color problems
with MorphOS.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 439aa85061f103446df7b42632d730971a372432.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
BALATON Zoltan
c799d2ee7e ati-vga: Improve readability of ati_2d_blt function
Move common parts before the switch to remove code duplication and
improve readibility.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 04b67ff483223d4722b0b044192558e7d17b36b5.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05 09:50:33 +02:00
Peter Maydell
41742927ee hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface struct
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns.  This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.

Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.

This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-03 10:51:35 +02:00
Li Qiang
b0ee78ff31 virtio-gpu: check if the resource already exists in virtio_gpu_load()
While loading virtio-gpu, the data can be malicious, we
should check if the resource already exists.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190628161358.10400-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-03 10:51:06 +02:00
Gerd Hoffmann
a7f85e03b9 virtio-gpu: fix unmap in error path
We land here in case not everything we've asked for could be mapped.
So unmap only the bytes which have actually been mapped.

Also we didn't access anything, so acces_len can be 0.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190628072357.31782-1-kraxel@redhat.com
2019-07-03 08:57:09 +02:00
Peter Maydell
0094908375 vga: ati fixes, add ati vgabios.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdFe5kAAoJEEy22O7T6HE45qQP/37tN/q9FAjfvwu26zbbhcYd
 V0wchXmnKcZ6mszPKtoYnXJV3poQj8aNQGVb3/vMB+3+ENVbrH1J6G7fxxGiZyNc
 owG4JmMy2OmLdPzSeEwnPafOg8m5UPPgXQwuuCNseUFigcx+3zjB8LPY2jW23DGl
 Jxhd8hvxaozZXbUzi7NA5dcoAq11cG6tz5D6DS5pCtbSj/puYF6Zz12o82E0Poaw
 /sxCAwfhVVWNHXrw10Az3TmZUV9JKyc3XkMIy74P/cD4UhJwXCbzdbSZiIwB3ASD
 psm2QPoEp4/kl2xpitycvHI9eWKojEGN/m093UZiPv6rMVzGDNr97ntRsAtXl0VS
 Gf/sU/5JR9yg8ZmxCKE//Z2r8KPWybqdMhfpxt5JGhd2MA3eHUXo4a3IezXxHkQB
 EJrJK+DV42tp6DMH4iMrnJZPET0DWUVdvbAZc+l8HFmMZBeOMXUFfGUNLQaEn3jC
 bUrPGgtt2G80Ltl4usMSGcAwAo9CrES3egh8InENsZi1VrbBVb+7VXN0g1v+1IIf
 IE12q730HWDwfWcbCAmM3s92ISujRQriCsW+NhW5xMc5a0bACXIoHy7zmw7X/ep7
 N0uyv04c3PsPPH5Kou2IcdhVILT5u4ynT2KVCtYo6ip5/DZTpNhvrrVF93vNkbqe
 XrfF5WwTa8iuaDImdq/T
 =8o+H
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190628-pull-request' into staging

vga: ati fixes, add ati vgabios.

# gpg: Signature made Fri 28 Jun 2019 11:39:32 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190628-pull-request:
  ati-vga: switch to vgabios-ati.bin
  seabios: add ati vgabios binary
  seabios: add config for ati vgabios
  ati-vga: Fixes to offset and pitch registers
  ati-vga: Implement DDC and EDID info from monitor
  i2c: Move bitbang_i2c.h to include/hw/i2c/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 19:11:53 +01:00
Gerd Hoffmann
263807f4e8 ati-vga: switch to vgabios-ati.bin
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620151104.2678-4-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
BALATON Zoltan
866ad5f5ff ati-vga: Fixes to offset and pitch registers
Fix bit masks of registers for offset and pitch and also handle
default values for both R128P and RV100. This improves picture a bit
but does not resolve all problems yet so there might be some more bugs
somewhere.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190624100005.7A1CA746395@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
BALATON Zoltan
c82c7336de ati-vga: Implement DDC and EDID info from monitor
This adds DDC support to ati-vga and connects i2c-ddc to it. This
allows at least MacOS with an ATI ndrv, Linux radeonfb and MorphOS to
get monitor EDID info (although MorphOS splash screen is not displayed
and radeonfb needs additional tables from vgabios-rv100). Xorg needs
additional support from VESA vgabios, it's missing INT10 0x4F15
function (see
https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/vbe/vbe.c)
without which no DDC is available that also prevents loading the
accelerated X driver.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 046ddebb7ec8db48c4e877ee444ec1c41e385a74.1561028123.git.balaton@eik.bme.hu

ati-vga: Clarify comment

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620195213.C54127461AE@zero.eik.bme.hu

ati-vga: Add DDC reg names for debug

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190621181459.2F8207462AA@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
Anthony PERARD
a3434a2d56 xen: Import other xen/io/*.h
A Xen public header have been imported into QEMU (by
f65eadb639 "xen: import ring.h from xen"), but there are other header
that depends on ring.h which come from the system when building QEMU.

This patch resolves the issue of having headers from the system
importing a different copie of ring.h.

This patch is prompt by the build issue described in the previous
patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"'

ring.h and the new imported headers are moved to
"include/hw/xen/interface" as those describe interfaces with a guest.

The imported headers are cleaned up a bit while importing them: some
part of the file that QEMU doesn't use are removed (description
of how to make hypercall in grant_table.h have been removed).

Other cleanup:
- xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h.
- xenfb.c doesn't need event_channel.h.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Gerd Hoffmann
0a71966253 edid: flip the default to enabled
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190607083444.32175-1-kraxel@redhat.com
2019-06-13 09:34:50 +02:00
Markus Armbruster
fe2611b016 Clean up a header guard symbols (again)
Commit d52c454aad "contrib: add vhost-user-gpu" and "c68082c43a
virtio-gpu: split virtio-gpu-pci & virtio-vga" created headers with
unusual header guard symbols.  Clean them up

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190607141321.9726-1-armbru@redhat.com>
2019-06-12 13:20:21 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Marc-André Lureau
267f664658 hw/display: add vhost-user-vga & gpu-pci
Add new virtio-gpu devices with a "vhost-user" property. The
associated vhost-user backend is used to handle the virtio rings and
provide rendering results thanks to the vhost-user-gpu protocol.

Example usage:
-object vhost-user-backend,id=vug,cmd="./vhost-user-gpu"
-device vhost-user-vga,vhost-user=vug

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-10-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
c68082c43a virtio-gpu: split virtio-gpu-pci & virtio-vga
Add base classes that are common to vhost-user-gpu-pci and
vhost-user-vga.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-9-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
50d8e25ea6 virtio-gpu: split virtio-gpu, introduce virtio-gpu-base
Add a base class that is common to virtio-gpu and vhost-user-gpu
devices.

The VirtIOGPUBase base class provides common functionalities necessary
for both virtio-gpu and vhost-user-gpu:
- common configuration (max-outputs, initial resolution, flags)
- virtio device initialization, including queue setup
- device pre-conditions checks (iommu)
- migration blocker
- virtio device callbacks
- hooking up to qemu display subsystem
- a few common helper functions to reset the device, retrieve display
informations
- a class callback to unblock the rendering (for GL updates)

What is left to the virtio-gpu subdevice to take care of, in short,
are all the virtio queues handling, command processing and migration.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Marc-André Lureau
83a7d3c021 virtio-gpu: add a pixman helper header
This will allow to share the format conversion function with
vhost-user-gpu.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:29:07 +02:00
Marc-André Lureau
ad08e67a96 virtio-gpu: add bswap helpers header
The helper functions are useful to build the vhost-user-gpu backend.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:29:07 +02:00
Gerd Hoffmann
da35f7f1ee virtio-gpu: add sanity check
Require a minimum 16x16 size for the scanout, to make sure the guest
can't set either width or height to zero.  This (a) doesn't make sense
at all and (b) causes problems in some UI code.  When using spice this
will triggers an assert().

Reported-by: Tyler Slabinski <tslabinski@slabity.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190527091226.4943-1-kraxel@redhat.com
2019-05-28 08:14:44 +02:00
Hou Qiming
f79081b4b7 hw/display/ramfb: initialize fw-config space with xres/ yres
If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Hou Qiming
a9e0cb67b7 hw/display/ramfb: lock guest resolution after it's set
Only allow one resolution change per guest boot, which prevents a
crash when the guest writes garbage to the configuration space (e.g.
when rebooting).

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-3-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Hou Qiming
d57f252add hw/display/ramfb: fix guest memory un-mapping
Pulled back the `qemu_create_displaysurface_guestmem` function to create
the display surface so that the guest memory gets properly unmapped.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-2-marcel.apfelbaum@gmail.com
[rename the new functions and use QEMU coding style]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Daniel P. Berrangé
f2784eed30 hw: report invalid disable-legacy|modern usage for virtio-1-only devs
A number of virtio devices (gpu, crypto, mouse, keyboard, tablet) only
support the virtio-1 (aka modern) mode. Currently if the user launches
QEMU, setting those devices to enable legacy mode, QEMU will silently
create them in modern mode, ignoring the user's (mistaken) request.

This patch introduces proper data validation so that an attempt to
configure a virtio-1-only devices in legacy mode gets reported as an
error to the user.

Checking this required introduction of a new field to explicitly track
what operating model is to be used for a device, separately from the
disable_modern and disable_legacy fields that record the user's
requested configuration.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215103239.28640-2-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Peter Maydell
e24f44dbea Kconfig settings for the Arm machines
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJc2SifAAoJEC7Z13T+cC21vyAQAJe3IrtArFD+3lNB30BfVYP0
 PT7J//C4wH/E+nAZ7bx6K/MMkutNJyMJArpYGqHk+KGm9oJvVfm9fOZKjUF0rJVo
 /WiXH96Ux8eBI0fFUv+ZLCXGWwALIC0N3LeoHbxuwhUBfKd6vv+trddksx/RQjvo
 dWA5aVwQAYm106Bj/Q6loeXyIVeWkrRxwCEcnAygCLGHFSsXJ9gj2js8OHCywLVo
 kV5KIdaLUw20xh9u6mfNS79Jhe7kHz58GIAMg7VwPZqmiTZJSOMb1uZ6eXk+cGBb
 3I2VE7RfEprd+9tE9aEiu1s7mCsW/Kh9NeWQBjiGwTwsja7ewMy08ugqzFFTtyE+
 M1kf/8D/xyhRnyeNQUR+2BlcDKeTxmaK1Ndk4ybu9QnRcye4ieZLLGDMqKZdiT9U
 vwcilGd0QoxmLXXGTNTcW3sRFl2HDg/h8kaH+9dFZSSMb/T4TaoGebpAT013pSou
 t6EWn5QhLu90ptbv57N/4YMRmjg6kvCytl5XMenEoY4cx0bFXkQE8lFv4WTCB9Sv
 wv5QXA6VbmcIdHfnIFkhxU5kUonLWWiFPdCcbLmqG74OCssr17fq9+BDxC4umMxb
 UTnpxegTX4JcpIup1rvV8vN5J/EBbtrhl+qzCwf+ErK+S34xRqXC80ZWxi0JBleV
 BJLdKdD6oJk+xMznju2/
 =wO8o
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-05-13' into staging

Kconfig settings for the Arm machines

# gpg: Signature made Mon 13 May 2019 09:19:43 BST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-05-13: (29 commits)
  hw/arm: Remove hard-enablement of the remaining PCI devices
  hw/arm: Express dependencies of the musca machines with Kconfig
  hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig
  hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
  hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig
  hw/arm: Express dependencies of the remaining IMX boards with Kconfig
  hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig
  hw/arm: Express dependencies of sabrelite with Kconfig
  hw/arm: Express dependencies of canon-a1100 with Kconfig
  hw/arm: Express dependencies of the raspi machines with Kconfig
  hw/arm: Express dependencies of the MPS2 boards with Kconfig
  hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
  hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
  hw/arm: Express dependencies of the virt machine with Kconfig
  hw/arm: Express dependencies of the aspeed boards with Kconfig
  hw/arm: Express dependencies of collie with Kconfig
  hw/arm: Express dependencies of xilinx-zynq with Kconfig
  hw/arm: Express dependencies of the PXA2xx machines with Kconfig
  hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
  hw/arm: Express dependencies of stellaris with Kconfig
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13 16:52:56 +01:00
Thomas Huth
f3c3a1e2bf hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
This cleans up most settings in default-configs/aarch64-softmmu.mak.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:32 +02:00
Thomas Huth
79e93e24de hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Thomas Huth
4cdea98bfe hw/arm: Express dependencies of integratorcp with Kconfig
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13 09:36:31 +02:00
Markus Armbruster
58ea30f514 Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13 08:58:55 +02:00
Markus Armbruster
bbfff19688 Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:

    contrib/libvhost-user/libvhost-user-glib.h
    contrib/libvhost-user/libvhost-user.c
    contrib/libvhost-user/libvhost-user.h
    linux-user/mips64/cpu_loop.c
    linux-user/mips64/signal.c
    linux-user/sparc64/cpu_loop.c
    linux-user/sparc64/signal.c
    linux-user/x86_64/cpu_loop.c
    linux-user/x86_64/signal.c
    slirp/src/*
    target/s390x/gen-features.c
    tests/fp/platform.h
    tests/migration/s390x/a-b-bios.c
    tests/test-rcu-simpleq.c
    tests/test-rcu-tailq.c
    tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c

We're in the process of spinning out slirp/.  tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't.  tests/uefi-test-tools/ is guest
software.  The remaining reverts are the same as in commit
b7d89466dd.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
2019-05-13 08:58:55 +02:00
Paolo Bonzini
6306cae275 i2c-ddc: move it to hw/display
Move it together with the other EDID code.  hw/i2c should only
include the core and the adapters, not the slaves.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190325155923.30987-1-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:56:10 +02:00
BALATON Zoltan
349ebdd76d ati-vga: Fix check for blt outside vram
Fix the check preventing calling pixman functions that would access
memory outside allocated vram. The r128 X driver sometimes seem to try
blits that span outside vram, this check prevents crashing QEMU in
that case. (The r128 X driver may have problems even on real hardware
so I'm not sure if it's a client bug or emulation problem but at least
QEMU should survive.)

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Message-Id: <20190409110732.5C5FF7465DB@zero.eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:55:13 +02:00
Daniel P. Berrangé
94932c95c1 qxl: avoid unaligned pointer reads/writes
The SPICE_RING_PROD_ITEM() macro is initializing a local
'uint64_t *' variable to point to the 'el' field inside
the QXLReleaseRing struct. This uint64_t field is not
guaranteed aligned as the struct is packed.

Code should not take the address of fields within a
packed struct. Changing the SPICE_RING_PROD_ITEM()
macro to avoid taking the address of the field is
impractical. It is clearer to just remove the macro
and inline its functionality in the three call sites
that need it.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190412121626.19829-6-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:55:07 +02:00
Philippe Mathieu-Daudé
fad691db49 hw/display/cirrus_vga: Remove unused include
Commit ce3cf70eda split the ISA device out of the PCI one,
but forgot to remove the "hw/loader.h" header inclusion (the ISA
device calls rom_add_vga()).  Remove the now unused include.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190505225640.4592-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Philippe Mathieu-Daudé
295854686e hw/display/cirrus_vga: Update the documentation URL
The documentation URL is not working, but is backed up by the
Wayback Machine on the Internet Archive.
Replace the outdated link by a captured one.
Add another link to the VGADOC4b.ZIP archive content.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190504121650.12651-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Prasad J Pandit
d52680fc93 qxl: check release info object
When releasing spice resources in release_resource() routine,
if release info object 'ext.info' is null, it leads to null
pointer dereference. Add check to avoid it.

Reported-by: Bugs SysSec <bugs-syssec@rub.de>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20190425063534.32747-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:11:27 +02:00
Philippe Mathieu-Daudé
8a08cc71d2 hw/devices: Move Blizzard declarations into a new header
Add an entries the Blizzard device in MAINTAINERS.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Philippe Mathieu-Daudé
ee2ccc57e9 hw/devices: Move TC6393XB declarations into a new header
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Philippe Mathieu-Daudé
fae06a33f0 hw/display/tc6393xb: Remove unused functions
No code used the tc6393xb_gpio_in_get() and tc6393xb_gpio_out_set()
functions since their introduction in commit 88d2c950b0. Time to
remove them.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-4-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29 17:57:21 +01:00
Peter Maydell
84bdc58c06 * Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
 * Fix for SEV with VFIO (Brijesh)
 * Allow compilation without CONFIG_PARALLEL (Thomas)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlyTvvAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNNwwf/RrtjBoqu8Ulu6k+HJczdpkhO44c5
 R7sidGaOBHVjT+EsaYZxanXQlsbpDPiXCRoMRMln+O3Kgso/UlVTLBfctIjuf5kp
 P8Amp8rw843yl3TQ+Xaqat1qtfVVN2xjRDoyRwWrTU5w52MVVsan2j1/XzGX/7Bb
 Y3gXRxsN7MyjDCXxhxVwQCxKU2ue3ytvnfdCnu1SNZxZEaFAyGprTNCCTXYugehl
 bVauAs/0qOZWEyvElinNEz+zbqMTm07ULAWBRXgCDcOudsidZFtu0Xl62dXlp1Ou
 0zkaoGiOdMM6OXZkLd6vOK8mY9XDuqaUZE3zAeFMJsK1wSnZdGUVCJO1Hw==
 =Pkcj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
  virtio-vga: only enable for specific boards
  config-all-devices.mak: rebuild on reconfigure
  minikconf: fix parser typo
  intel-iommu: optimize nodmar memory regions
  test-announce-self: convert to qgraph
  hw/alpha/Kconfig: DP264 hardware requires e1000 network card
  hw/hppa/Kconfig: Dino board requires e1000 network card
  hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
  hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
  hw/ppc/Kconfig: Bamboo machine requires e1000 network card
  hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
  hw/mips/Kconfig: Malta machine requires the pcnet network card
  hw/i386/Kconfig: enable devices that can be created by default
  hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
  hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
  prep: do not select I82374
  hw/i386/Kconfig: PC uses I8257, not I82374
  hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
  target/i386: sev: Do not pin the ram device memory region
  memory: Fix the memory region type assignment order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/rdma/Makefile.objs
#	hw/riscv/sifive_plic.c
2019-03-28 09:18:53 +00:00
BALATON Zoltan
339534d402 ati-vga: Fix indexed access to video memory
Coverity (CID 1399700) found that this was wrong so instead of trying
to do it by hand use existing access functions that should work better.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190318223842.427CB7456B2@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-26 12:06:49 +01:00
Markus Armbruster
dec9776049 trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file.  Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of cleanup-trace-events.pl.  Same funnies as in the
previous commit, of course.  Manually shorten its change to
linux-user/trace-events to */signal.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
a9779a3ab0 trace-events: Delete unused trace points
Tracked down with cleanup-trace-events.pl.  Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Paolo Bonzini
938912a866 virtio-vga: only enable for specific boards
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.

The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable.  At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-21 17:42:18 +01:00
Gerd Hoffmann
dc84ed5b57 virtio-gpu: clear command and fence queues on reset
It was never correct to not clear them.  Due to commit "3912e66a3feb
virtio-vga: fix reset." this became more obvious though.  The virtio
rings get properly reset now, and trying to process the stale commands
will trigger an assert in the virtio core.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190314115358.26678-3-kraxel@redhat.com
2019-03-18 13:10:57 +01:00
Gerd Hoffmann
9032e3d71c virtio-gpu: delay virglrenderer reset when blocked.
If renderer_blocked is set do not call virtio_gpu_virgl_reset().
Instead set a flag indicating that virglrenderer needs a reset.
When renderer_blocked gets cleared do the actual reset call.

Without this we can trigger an assert in spice due to calling
spice_qxl_gl_scanout() while another operation is still running:

spice_qxl_gl_scanout: condition `qxl_state->gl_draw_cookie == GL_DRAW_COOKIE_INVALID' failed

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190314115358.26678-2-kraxel@redhat.com
2019-03-18 13:10:57 +01:00
Gerd Hoffmann
a223b478cb ati-vga: fix tracing
HWADDR_PRIx can't be used in tracing, use PRIx64 instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190312081143.24850-1-kraxel@redhat.com
2019-03-18 13:10:17 +01:00
Peter Maydell
cfc3fef6b4 audio: introduce -audiodev
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJch1vTAAoJEEy22O7T6HE4KL8QAI7VfMK8ZKTx/9Su46RL1A0G
 xNYhapdkhK2DEMd7JDY+eg8I8VQEwWroEjphCxLdx3p84Gr44gwgj3T24iRlXugq
 hJEgtBR548bBBdGd6KRihS8ZOro1T2gXol/TRq9z/TEF2LU6AVy52riZ/iydEd2U
 /ibkISR/vLdOnQ1Mj4YpchCZHx1yvMjSOhF/Cw2kXUm8C0jEuj3ws/BfdZQ8DxDG
 ayzS7JwSGOedsoFj+yfWX/YjCiocaXSLux9kyACzhHSJcA/5hw5srbXyhe4JrgdY
 BEqaUa23KiulgFt5fXnprktq+BQba/a4Tbx+YZFaNvX4HXqVccnCNN+VMkV4CvBN
 Y6UwijfaePVaQFP4kP+vpvqdPoJHNGikPlX8j3Q7ofL5+/c7Qk9yChNyB8lpfOIe
 KBNNsIIJO2GVU0IVNuqIGldWZYQw2y8ojpNSntg5lyFIrwZ+ipDFuxD9weZibVgc
 pa4VfPNKW4lOWrDX0PLv5eTNWOLamY3T1wY6pQCOtHgzlChRa28pMWkB7VkzTTQW
 gzipigqpVzmd3l1m2uI7LOovZa326IrGRC1/Yb4a41Gz58p9a1U2sYTijhPlAaeq
 VDMafPTAIJYpg0MW5Uxh1eB05WzNafPfEznjMJ/Z84J4P/oGFxlOGcL99sAbrxpl
 cQWWZlBGINQhxZ1PtvJc
 =7YpW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190312-pull-request' into staging

audio: introduce -audiodev

# gpg: Signature made Tue 12 Mar 2019 07:12:19 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20190312-pull-request:
  audio: -audiodev command line option: cleanup
  wavaudio: port to -audiodev config
  spiceaudio: port to -audiodev config
  sdlaudio: port to -audiodev config
  paaudio: port to -audiodev config
  ossaudio: port to -audiodev config
  noaudio: port to -audiodev config
  dsoundaudio: port to -audiodev config
  coreaudio: port to -audiodev config
  alsaaudio: port to -audiodev config
  audio: -audiodev command line option basic implementation
  audio: -audiodev command line option: documentation
  audio: use qapi AudioFormat instead of audfmt_e
  qapi: qapi for audio backends

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	qemu-deprecated.texi
2019-03-12 16:45:13 +00:00
Kővágó, Zoltán
85bc58520c audio: use qapi AudioFormat instead of audfmt_e
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum.  This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.

This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 10:29:26 +01:00
BALATON Zoltan
862b4a291d hw/display: Add basic ATI VGA emulation
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.

While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 08:04:55 +01:00
Gerd Hoffmann
0be00346d1 virtio-gpu: make virtio_gpu_reset static
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-4-kraxel@redhat.com
2019-03-11 08:04:12 +01:00
Gerd Hoffmann
3912e66a3f virtio-vga: fix reset.
Store reset handler of the parent class and just call that for a
complete virtio reset.  When taking the shortcut and calling
virtio_gpu_reset() directly the generic virtio reset code (for
virtqueues etc) will not be executed.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1597621
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190307080244.9011-3-kraxel@redhat.com
2019-03-11 08:04:12 +01:00
Peter Maydell
234afe7828 - qtest fixes
- Some generic clean-ups by Philippe
 - macOS CI testing via cirrus-ci.com
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcgi7HAAoJEC7Z13T+cC21Y00P/1/m7FcVVfMlDw85+rYjkUri
 QWPvWUORhGbAkv87AfsFezCzoO/n3KX+AefPDWbnIM1Ixt8MvS/8zPOWAXwHUKVy
 ira5jP7CNJDPGr13qoO0lNrvU5cmxRWdmLOMbMsqW3Aparc5RBgDPn0bvcm5l2vX
 i90fdxpXvpQ/FgoX0J1j//awa3JXf94pijBb3pL985qXI670ZkRq13JIlmVZ1+Gw
 Fmx4XvpIwajo2HM1G+CcG8ElAxTgYmjC9bkKJW1fddOkwP7wRnZtAdLZpRTzojCb
 CUNBaTSM/xjinVzOhwgiHFtak/ZMOdUZrGjrbin1e/p+Xppw75P7FdUoiSnJNhga
 BJr8LbGcJwcIXfpMdEw7ZGlWACd+D0+G7363jNWOPyff3by6xx4gdCrBsYc4qwSR
 MJ8Wyb5o4oSisUg06VxghGyPTE/xBgog/YgLb4Bu6FXjCPKsl0mKQMxG0ROZLvT+
 dFiaHeeCKEn7Yw6OkdqW9Sa1uGfna7gRCC7hZErDA3URe+02dUBb4VCtnjAaCLx3
 0Jq8jpb2T57N8roP23QFQBxA+Y859qlZPrWzwRqbgdADZCnFsSJlmBxjDmhbYuF0
 4qAQtGFTgdmhjdG/FjJkcMQkCcx4h6V62kqi8HtP+vCd43SFwLPqHH/HKq5cU/Zt
 YIXF2oo6z5k7iqx1H26G
 =DEp5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging

- qtest fixes
- Some generic clean-ups by Philippe
- macOS CI testing via cirrus-ci.com

# gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-03-08:
  cirrus.yml: Add macOS continuous integration task
  tests/bios-tables: Improve portability by searching bash in the $PATH
  vhost-user-test: fix leaks
  tests: Do not use "\n" in g_test_message() strings
  hw/devices: Remove unused TC6393XB_RAM definition
  hw: Remove unused 'hw/devices.h' include
  tests: Move qdict-test-data.txt to tests/data/qobject/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/vhost-user-test.c
2019-03-08 16:31:34 +00:00
Philippe Mathieu-Daudé
04f3c0084d hw: Remove unused 'hw/devices.h' include
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07 22:16:11 +01:00
Paolo Bonzini
0858746b83 lm32-softmmu.mak: express dependencies with Kconfig
%-softmmu.mak only keep boards and optional device
definitions in Kconfig mode.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:46:19 +01:00
Yang Zhong
b42075bb77 virtio: express virtio dependencies with Kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
32690c8bed display: express dependencies with kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-40-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
1550b0e6bf i2c: express dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
06266ecda7 hw/display: make edid configurable
Use CONFIG_EDID to make edid-generate.c and edid-region.c
configurable.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-26-yang.zhong@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Corey Minyard
2ac4c5f4d2 i2c: have I2C receive operation return uint8_t
It is never supposed to fail and cannot return an error, so just
have it return the proper type.  Have it return 0xff on nothing
available, since that's what would happen on a real bus.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27 21:06:08 -06:00
Peter Maydell
59a568b578 vga: bugfixes and edid support for virtio-vga
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcb7G5AAoJEEy22O7T6HE47MsQANkX98h9JT78GcBhO3UqE1yW
 TDwi6Qj0lUEYdW08LraSIsbDC8XHMmOr35aDEdpUhZyMP1mKmnKaxm+x6YR/q01W
 vExy8nMtyueHSrcJVTe5p+jS5SHXnJlJOvqL/qoh97g0zEbQXnncoBcYdzJGb5DS
 AQGJ/cs+0macNeMcYqauowJONFirKDapntmdCvIHoqZzMhefiyB31U0q6GiC0aiW
 70GjpSX2Mkizit4Chny1Q2DCkJchtM7qwWdVLOLbH8NMsGO3rp9PVVkMMwBGxjyP
 MmT7GVf5cinXfLQGKDuDrgztHjrO2kxRH0St9TBwUVCvMY/zjtVtTc0CabeH+wDd
 2joWGwRPsnYcY6MMAiFoPo0CMXhQhQjVdrqOpn8+L6rs9sdbefk7ZA5fIJoIhvjp
 K5iJ8bCYIdA2R5EdKCKdAariASDAw2/ztqS3WAlpz7gAO2RMJEcqsYlUUXnl4HbB
 0TFuPJpJrCnl5yv/zoKdM8cKyZza/7ULPh4uGfiB7mpcik/UfzkO0VLMuk+7xwJ/
 KoNS4vHZrD7lFDHyvkgHYP7CV12ClaYhEVPWZMZ0Vz7XeVWEe/un1oyryORPSBIO
 kRiqSBCZbolvJlo9Iq3gM8jIFguPD7cGzQoyr+1RaCFX6NT4kqw75n5LW+Pg6CRU
 l25LOigqtUJgKBJKQD/S
 =sx1C
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190222-pull-request' into staging

vga: bugfixes and edid support for virtio-vga

# gpg: Signature made Fri 22 Feb 2019 08:24:25 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190222-pull-request:
  display/virtio: add edid support.
  virtio-gpu: remove useless 'waiting' field
  virtio-gpu: block both 2d and 3d rendering
  virtio-gpu: remove unused config_size
  virtio-gpu: remove unused qdev

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-25 12:49:07 +00:00
Gerd Hoffmann
1ed2cb32dc display/virtio: add edid support.
This patch adds EDID support to the family of virtio-gpu devices.  It is
turned off by default, use the new edid property to enable it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190221081054.13853-1-kraxel@redhat.com
2019-02-22 07:25:04 +01:00
Marc-André Lureau
9a6d74c0de virtio-gpu: remove useless 'waiting' field
Let's check renderer_blocked instead directly.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
ad341aacbf virtio-gpu: block both 2d and 3d rendering
Now that 2d commands are translated to 3d rendering, qemu must stop
sending 3d updates (from 2d) to Spice as well.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1674324

Cc: cfergeau@redhat.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20190221114330.17968-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
4a9102c5eb virtio-gpu: remove unused config_size
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Marc-André Lureau
836682bc03 virtio-gpu: remove unused qdev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190221114330.17968-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22 07:23:57 +01:00
Lukáš Hrázký
be812c0ab7 spice: set device address and device display ID in QXL interface
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).

Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.

Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 10:15:26 +01:00
Philippe Mathieu-Daudé
70cc0c1fb0 hw/display/milkymist-tmu2: Move inlined code from header to source
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Philippe Mathieu-Daudé
57d434407a hw/display/milkymist-tmu2: Explicit the dependency to both X11 / OpenGL
The TMU device requires both X11 and OpenGL.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-4-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Philippe Mathieu-Daudé
3a831fc0df hw/display: Move Milkymist specific hardware out of common-obj list
The Milkymist specific hardware is only used by the LM32 target,
it is pointless to compile those objects in other targets.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-2-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-01 11:58:50 +01:00
Daniel P. Berrangé
00f4269743 display: ensure qxl log_buf is a nul terminated string
The QXL_IO_LOG command allows the guest to send log messages to the host
via a buffer in the QXLRam struct. QEMU prints these to the console if
the qxl 'guestdebug' option is set to non-zero. It will also feed them
to the trace subsystem if any backends are built-in.

In both cases the log_buf data will get treated as being as a nul
terminated string, by the printf '%s' format specifier and / or other
code reading the buffer.

QEMU does nothing to guarantee that the log_buf really is nul terminated,
so there is potential for out of bounds array access.

This would affect any QEMU which has the log, syslog or ftrace trace
backends built into QEMU. It can only be triggered if the 'qxl_io_log'
trace event is enabled, however, so they are not vulnerable without
specific administrative action to enable this.

It would also affect QEMU if the 'guestdebug' parameter is set to a
non-zero value, which again is not the default and requires explicit
admin opt-in.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-24 14:16:56 +00:00
Juan Quintela
7ecb381fcf virtio: split virtio gpu bits from virtio-pci.h
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17 21:10:57 -05:00
Paul Durrant
2d0ed5e642 xen: re-name XenDevice to XenLegacyDevice...
...and xen_backend.h to xen-legacy-backend.h

Rather than attempting to convert the existing backend infrastructure to
be QOM compliant (which would be hard to do in an incremental fashion),
subsequent patches will introduce a completely new framework for Xen PV
backends. Hence it is necessary to re-name parts of existing code to avoid
name clashes. The re-named 'legacy' infrastructure will be removed once all
backends have been ported to the new framework.

This patch is purely cosmetic. No functional change.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14 13:45:40 +00:00
Paolo Bonzini
7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Peter Maydell
823dcd58ea ui: bugfixes, drop keymap include support, drop dead code.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJcNwaOAAoJEEy22O7T6HE4usIQAKMdl63407uCPDP+k9ySKL2l
 W4O3uRZ0sj+RB7hk8evUJIT/oxGcfD2a4CHQPX6UDn5c5XgZoAuHe/gIzQe4v2QS
 o/Ot7qEbES4QitTSqhkiEuKl6iCp2mY+gchsVRMxfjOFvusU0B/nOl9BZCe57EFc
 jJQyI5sKJb/s6ygDp7yMwA5/qfglIv+wHAbX1GDBAiO6Vuwdk1OOXF/mhI/O1TA3
 T8d71v8cFiC1hWl7vLFecejN5lcXAO/1jVkyuEU9bQfMe1qoZ+BhzJvgzet8XzW+
 j1HrcybNjClvr1Iv0SFkwoRC6w8c2tMOtT10LHtiWF38r/1v8gWcQk36Jeim2Kq3
 RcV9IX56PJWSRTa9Roqvemc3hn3e7WcUkmyQX0PMbNq8obJhjNFuyEFunS1Wo4/G
 ldJ+NSK1n3l90s3ZFRLWiL4DADpYeQy34U3iG4VlC6AYXmKWMjbZCiCyyJCRtawP
 aYLbVQ/+6NsVQol4LaOqlP7uukmOBRiHZIdFTQn9xG3tymJZcEGVM3YSkfuK6InQ
 qTmmRFCUhGi0YPkYupk4BfUyHlSpnecoRGTh4jtetr2CctrhotRCC1L4z45KbzMM
 kWQGaqzCqLGuG7eDSNmwPdrjUKgoqTLWgTikCJhCS+QTFRWR23RigD8PrAq62kGc
 oFNGlDkpqizbdoEAfWOp
 =TcEc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190110-pull-request' into staging

ui: bugfixes, drop keymap include support, drop dead code.

# gpg: Signature made Thu 10 Jan 2019 08:47:10 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190110-pull-request:
  spice: Remove unused include
  keymaps: drop support for include files
  keymaps: remove common include
  keymaps: drop nl-be map
  keymaps: remove modifiers include
  ui/console: Remove qemu_create_display_surface_guestmem()
  configure: bump spice-server required version to 0.12.5
  egl-headless: add egl_create_context

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-10 16:29:02 +00:00
Marc-André Lureau
1b63665c2c configure: bump spice-server required version to 0.12.5
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.

(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")

According to repology, all the distros that are build target platforms
for QEMU include it:

      RHEL-7: 0.14.0
      Debian (Stretch): 0.12.8
      Debian (Jessie): 0.12.5
      FreeBSD (ports): 0.14.0
      OpenSUSE Leap 15: 0.14.0
      Ubuntu (Xenial): 0.12.6

Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-10 08:55:13 +01:00
Thomas Huth
0cd0589ecf trivial: Don't include isa.h if it is not really necessary
These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-09 11:24:35 +01:00
Eduardo Habkost
a4ee4c8baa virtio: Helper for registering virtio device types
Introduce a helper for registering different flavours of virtio
devices.  Convert code to use the helper, but keep only the
existing generic types.  Transitional and non-transitional device
types will be added by another patch.

Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19 16:48:16 -05:00
Mao Zhongyi
0323ee4321 display/g364fb: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
g364fb_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: kraxel@redhat.com
Cc: f4bug@amsat.org
Cc: alistair.francis@wdc.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-6-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Marc-André Lureau
03fee66fde vmstate: constify VMStateField
Because they are supposed to remain const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27 15:35:15 +01:00
Wang Xin
b7ee9e4970 cirrus_vga/migration: update the bank offset before use
The cirrus bank0/1 offset should be updated before we update the vram's alias
offset.

Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Message-id: 20181123064646.23036-1-linzhecheng@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-27 07:47:57 +01:00
Marc-André Lureau
627c865d22 edid: silence a stringop-overflow warning
Simplify the code that doesn't need strncpy() since length of string
is already computed.

/home/elmarco/src/qemu/hw/display/edid-generate.c: In function 'edid_desc_text':
/home/elmarco/src/qemu/hw/display/edid-generate.c:168:5: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
     strncpy((char *)(desc + 5), text, len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/edid-generate.c:164:11: note: length computed here
     len = strlen(text);
           ^~~~~~~~~~~~
cc1: all warnings being treated as errors

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181110111623.31356-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-12 14:14:18 +01:00
Peter Maydell
ef3a6af5e7 vga: two fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJb1wEcAAoJEEy22O7T6HE4D9MP/3xvz/3YHPRWug+px7PKeQTO
 K6GfT5zKCYl5xGg+CZPpQDp47UtEkiDb9zduWTP4cMUreVVa46b9iUoPdFuzqCsB
 RRbSAe8tDzW0tgf512XJK7F/BoxPTKvASxDFfH0oknJzXXujoST3oSUGQdkWLT1H
 FJ7Cjx2ko/LUYHGO2u7G+I8h5zvWjaeXy3WEMBQviL7Vyv1r6DYQBhnuDiT6kfuK
 LxbMqfUCvbcNHo3M9U0jlkEaRGSwzsyW3NXXh5IJ4kRnRKq33KjHkCgeIOuA92pj
 CErpT3oacKgAJ5QtYWjZAUS69YX2CBe/PDcMhO2WyhNi7B5avycuCbffJfxt1wtN
 lWmqMCw7ZqB5iQeW2Hs/PVoy7Z7ExN8PRT4qDwiRloayP8ZnJTASDPzat6yofqR3
 7bRMG7DAiBEbMQa6LaFnVNNhUEOAWWfPyofJ03qsOikJ/mGwWN9zq/A03H6XKRFE
 jm1OdS4n9TjmMCMqBc3YtoPy1wTX9bLxJdtGY+cYxaTB0kk/N25cPWMxFQ6NI0nX
 Xc1/DNIvLg8aamIcirlBU6inCwGXa9OdfeFEorSa98u4XD32A7M9vyLHUdVUmna7
 YtrFbTZ6GkrqqPVtQ1KcAJ7q09hyxh4Y1s2u5ZmyQT7RCDeAjQIm19UTthiqTzC1
 nGfup524BpB8+C4W1Hmm
 =BbNm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20181029-pull-request' into staging

vga: two fixes.

# gpg: Signature made Mon 29 Oct 2018 12:46:20 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20181029-pull-request:
  vga_int: remove unused function protype
  qxl: store channel id in qxl->id

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-29 12:59:15 +00:00
yuchenlin
e69a10f468 vga_int: remove unused function protype
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181022080053.9379-1-yuchenlin@synology.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-29 10:43:48 +01:00
Gerd Hoffmann
60e94e4397 qxl: store channel id in qxl->id
See qemu_spice_add_display_interface(), the console index is also used
as channel id.  So put that into the qxl->id field too.

In typical use cases (one primary qxl-vga device, optionally one or more
secondary qxl devices, no non-qxl display devices) this doesn't change
anything.

With this in place the qxl->id can not be used any more to figure
whenever a given device is primary (with vga compat mode) or secondary.
So add a bool to track this.

Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181012114540.27829-1-kraxel@redhat.com
2018-10-29 10:43:19 +01:00
Markus Armbruster
0765691e97 cpus hw target: Use warn_report() & friends to report warnings
Calling error_report() in a function that takes an Error ** argument
is suspicious.  Convert a few that are actually warnings to
warn_report().

While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.

Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Thomas Huth
ce3cf70eda hw/display/cirrus_vga: Move "isa-cirrus-vga" device into a separate file
In downstream distros like RHEL we'd like to disable some of the "legacy"
devices of QEMU. The ISA version of the Cirrus VGA device is one of these
legacy devices. So let's make the build process a little bit more flexible
here by putting the Cirrus ISA code into a separate file which is only
included if both, CONFIG_VGA_CIRRUS and CONFIG_VGA_ISA are set.

Note that this disables "isa-cirrus-vga" for the ppc-softmmu and the
alpha-softmmu target since CONFIG_VGA_ISA is not set there. But I think
this is OK since these targets are only interested in the PCI variant
anyway.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1539339106-32427-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-15 09:57:33 +02:00
Gerd Hoffmann
2f99f80c5d qxl: check qxl_phys2virt return value
Fixes: CID 1395986
Fixes: 979f7ef896
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181005134608.1251-1-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann
a0d098b794 bochs-display: wire up edid support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005160147.892-3-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann
cc22c1bf5d display: add separate config option for bochs-display
This allows modern architectures which don't care about vga
compatibility (risc-v for example) build bochs-display without
including all vga emulation too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181005160147.892-2-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Gerd Hoffmann
2e4a0b1766 edid: fix alignment issues
Use stl_le_p() & friends instead of casts.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181015055333.32030-1-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Peter Maydell
74e2e59b8d hw/display/bcm2835_fb: Silence Coverity warning about multiply overflow
Coverity complains (CID 1395628) that the multiply in the calculation
of the framebuffer base is performed as 32x32 but then used in a
context that takes a 64-bit hwaddr. This can't actually ever
overflow the 32-bit result, because of the constraints placed on
the s->config values in bcm2835_fb_validate_config(). But we
can placate Coverity anyway, by explicitly casting one of the
inputs to a hwaddr, so the whole expression is calculated with
64-bit arithmetic.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181005133012.26490-1-peter.maydell@linaro.org
2018-10-08 14:55:05 +01:00
Gerd Hoffmann
edbc4b24bb edid: fix vendor default
"EMU" actually is "Emulex Corporation", so not a good idea to use that
by default.  Lets use the Red Hat vendor id instead, which is in line
with the pci ids which are allocated from Red Hat vendor ids too.

Vendor list is available from http://www.uefi.org/pnp_id_list

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005091934.12143-1-kraxel@redhat.com
2018-10-05 11:26:56 +02:00
remy.noel
0ab90e6170 secondary-vga: delete mmio subregions upon exit
93abfc88bd introduced a reference cycle in
the vga-pci devices, preventing cleanup of the object upon hotblug.

This patch allows to break the cycle.

Signed-off-by: remy.noel <remy.noel@blade-group.com>
Message-id: 20181002121935.23706-1-remy.noel@blade-group.com

[ kraxel: delete the recently added edid region too ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05 11:23:37 +02:00
Peter Maydell
5a358b39f5 hw/display/qxl: Suppress clang-7 warning about misaligned atomic operation
If QEMU is compiled with clang-7 it results in the warning:

hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
    old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
                  ^

This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute.  clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address).  In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.

Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05 11:21:17 +02:00
Peter Wu
36ffc122dc qxl: support mono cursors with inverted colors
Monochrome cursors are still used by Windows guests with the
QXL-WDDM-DOD driver. Such cursor types have one odd feature, inversion
of colors. GDK does not seem to support it, so implement an alternative
solution: fill the inverted pixels and add an outline to make the cursor
more visible. Tested with the text cursor in Notepad and Windows 10.

cursor_set_mono is also used by the vmware GPU, so add a special check
to avoid breaking its 32bpp format (tested with Kubuntu 14.04.4). I was
unable to find a guest which supports the 1bpp format with a vmware GPU.

The old implementation was buggy and removed in v2.10.0-108-g79c5a10cdd
("qxl: drop mono cursor support"), this version improves upon that by
adding bounds validation, clarifying the semantics of the two masks and
adds a workaround for inverted colors support.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1611984
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180903145447.17142-1-peter@lekensteyn.nl

[ kraxel: minor codestyle fix ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-27 08:10:07 +02:00
Gerd Hoffmann
979f7ef896 qxl: use guest_monitor_config for local renderer.
When processing monitor config from guest store head0 width and height
for single-head configurations.  Use these when creating the
DisplaySurface in the local renderer.

This fixes a rendering issue with wayland.  Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen.  The monitor config has the actual screen size though.

This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com
2018-09-27 08:08:07 +02:00
Gerd Hoffmann
d46b40fce2 display/stdvga: add edid support.
This patch adds edid support to the qemu stdvga.  It is turned off by
default and can be enabled with the new edid property.  The patch also
adds xres and yres properties to specify the video mode you want the
guest use.  Works only with edid enabled and updated guest driver.

The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that.  So let's use that region to place the
EDID data block there.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann
97917e9e02 display/edid: add region helper.
Create a io region for an EDID data block.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann
e7992fc5a0 display/edid: add qemu_edid_size()
Helper function to figure the size of a edid blob, by checking how many
extensions are present.  Both the base edid blob and the extensions are
128 bytes in size.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Gerd Hoffmann
72d277a70e display/edid: add edid generator to qemu.
EDID is a metadata format to describe monitors.  On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.

On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid.  xorg ships a edid-decode utility
which you can use to turn the blob into readable form.

I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers.  This patch is the
first step, it adds an generator for EDID blobs to qemu.  Comes with a
qemu-edid test tool included.

With EDID we can pass more information to the guest.  Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor".  List of video modes.  Display resolution, pretty important
in case we want add HiDPI support some day.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
2018-09-27 08:07:51 +02:00
Marcus Comstedt
f3a60058c9 sm501: Adjust endianness of pixel value in rectangle fill
The value from twoD_foreground (which is in host endian format) must
be converted to the endianness of the framebuffer (currently always
little endian) before it can be used to perform the fill operation.

Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-09-25 11:12:25 +10:00
Gerd Hoffmann
8da132a56f virtio-gpu: add iommu support
Switch from cpu_physical_memory_map to dma_memory_map,
so iommu mappings for virtio-gpu objects work properly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-3-kraxel@redhat.com>
2018-09-03 08:31:57 +02:00
Gerd Hoffmann
3bb68f798d virtio-gpu: pass down VirtIOGPU pointer to a bunch of functions
No functional change, just preparation for a followup patch
which needs a VirtIOGPU pointer.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180829122101.29852-2-kraxel@redhat.com>
2018-09-03 08:31:50 +02:00
Gerd Hoffmann
91155f8bf7 use dpy_gfx_update_full
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180810132856.22833-1-kraxel@redhat.com
2018-08-30 13:24:13 +02:00
Gerd Hoffmann
161f4c4717 Revert "virtio-gpu: fix crashes upon warm reboot with vga mode"
This reverts commit 93f874fe9d.

Now with virtio-vga being resetted properly the
crash workaround is not needed any more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-3-kraxel@redhat.com
2018-08-30 12:52:57 +02:00
Gerd Hoffmann
43e4dbe206 virtio-vga: fix reset
We must call the reset functions for both virtio-gpu
and vga to properly reset the combo device.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-2-kraxel@redhat.com
2018-08-30 12:52:57 +02:00
Peter Maydell
cfb7ba9838 hw/display/bcm2835_fb: Validate bcm2835_fb_mbox_push() config
Refactor bcm2835_fb_mbox_push() to work by calling
bcm2835_fb_validate_config() and bcm2835_fb_reconfigure(),
so that config set this way is also validated.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-9-peter.maydell@linaro.org
2018-08-24 13:17:50 +01:00
Peter Maydell
f8add62c0c hw/display/bcm2835_fb: Validate config settings
Validate the config settings that the guest tries to set.

The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.

Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.

In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.

Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
2018-08-24 13:17:50 +01:00
Peter Maydell
01f18af98b hw/display/bcm2835_fb: Fix handling of virtual framebuffer
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.

Add support for this feature:
 * the property mailbox code needs to distinguish the
   virtual width/height from the physical width/height
 * the framebuffer code needs to do something with the
   virtual width/height/origin information

Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.

If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell
9a1f03f4ee hw/display/bcm2835_fb: Abstract out calculation of pitch, size
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell
9e2938a0fd hw/display/bcm2835_fb: Reset resolution, etc correctly
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell
ea662f7cc8 hw/display/bcm2835_fb: Drop unused size and pitch fields
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
2018-08-24 13:17:49 +01:00
Peter Maydell
193100b571 hw/misc/bcm2835_property: Track fb settings using BCM2835FBConfig
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
2018-08-24 13:17:48 +01:00
Peter Maydell
a02755ece0 hw/misc/bcm2835_fb: Move config fields to their own struct
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.

As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
2018-08-24 13:17:48 +01:00
Peter Maydell
3c825bb7c1 * x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
 * pm_smbus improvements (Corey)
 * Move validation to pre_plug for pc-dimm (David)
 * Fix memory leaks (Eduardo, Marc-André)
 * synchronization profiler (Emilio)
 * Convert the CPU list to RCU (Emilio)
 * LSI support for PPR Extended Message (George)
 * vhost-scsi support for protection information (Greg)
 * Mark mptsas as a storage device in the help (Guenter)
 * checkpatch tweak cherry-picked from Linux (me)
 * Typos, cleanups and dead-code removal (Julia, Marc-André)
 * qemu-pr-helper support for old libmultipath (Murilo)
 * Annotate fallthroughs (me)
 * MemoryRegionOps cleanup (me, Peter)
 * Make s390 qtests independent from libqos, which doesn't actually support it (me)
 * Make cpu_get_ticks independent from BQL (me)
 * Introspection fixes (Thomas)
 * Support QEMU_MODULE_DIR environment variable (ryang)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
 Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
 WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
 LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
 sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
 zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
 =UZiV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)

# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (69 commits)
  KVM: cleanup unnecessary #ifdef KVM_CAP_...
  target/i386: update MPX flags when CPL changes
  i2c: pm_smbus: Add the ability to force block transfer enable
  i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
  i2c: pm_smbus: Add interrupt handling
  i2c: pm_smbus: Add block transfer capability
  i2c: pm_smbus: Make the I2C block read command read-only
  i2c: pm_smbus: Fix the semantics of block I2C transfers
  i2c: pm_smbus: Clean up some style issues
  pc-dimm: assign and verify the "addr" property during pre_plug
  pc: drop memory region alignment check for 0
  util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
  pc-dimm: assign and verify the "slot" property during pre_plug
  ipmi: Use proper struct reference for BT vmstate
  vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
  vhost-scsi: unify vhost-scsi get_features implementations
  vhost-user-scsi: move host_features into VHostSCSICommon
  cpus: allow cpu_get_ticks out of BQL
  cpus: protect TimerState writes with a spinlock
  seqlock: add QemuLockable support
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23 19:03:54 +01:00
Paolo Bonzini
edd7541b8c fix "Missing break in switch" coverity reports
Many of these are marked as "intentional/fix required" because they
just need adding a fall through comment.  This is exactly what this
patch does, except for target/mips/translate.c where it is easier to
duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox
sources and decide to just remove the LOG_UNIMP before the fallthrough.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 13:32:50 +02:00
Peter Maydell
5f92799877 hw/display/vga-isa-mm: Convert away from old_mmio
Convert the vga-isa-mm device away from the old_mmio
MemoryRegion accessors.

This device is only used by the MIPS 'jazz' boards
"magnum" and "pica61".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20180802155147.1863-2-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 09:52:22 +02:00
Gerd Hoffmann
408e2f37be qxl: drop unused generation variable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180810132236.25908-1-kraxel@redhat.com
2018-08-21 09:51:40 +02:00
Thomas Huth
3f4919e49e hw/display/ramfb: Compile the ramfb code only when CONFIG_FW_CFG_DMA is set
According to the ramfb_setup() function, the ramfb device needs fw_cfg
with DMA, so we should also only compile and link it into those targets
which support it, to avoid that the device shows up on systems where it
can not be used at all (e.g. s390x).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1534786083-26559-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21 09:47:16 +02:00
Marc-André Lureau
93f874fe9d virtio-gpu: fix crashes upon warm reboot with vga mode
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.

Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.

https://bugs.launchpad.net/qemu/+bug/1784900/

Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-07 15:03:58 +01:00
Paolo Bonzini
fe04f0b4a1 hw/display/xlnx_dp: Move problematic code from instance_init to realize
aux_create_slave() calls qdev_init_nofail() which in turn "realizes"
the corresponding object. This is unlike qdev_create(), and it is wrong
because qdev_init_nofail() must not be called from an instance_init
function.  Move qdev_init_nofail() and the subsequent aux_map_slave into
the caller's realize function.

There are two more bugs that needs to be fixed here, too, where the
objects are created but not added as children.  Therefore when
you call object_unparent on them, nothing happens.

In particular dpcd and edid give you an infinite loop in bus_unparent,
because device_unparent is not called and does not remove them from
the list of devices on the bus.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1531745974-17187-17-git-send-email-thuth@redhat.com
[thuth: Added Paolo's fixup for the dpcd and edid unparenting]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-17 13:12:49 +01:00
BALATON Zoltan
6730df0514 sm501: Fix warning about unreachable code
Coverity warned that the false arm of conditional expression is
unreachable when it is inside an if with the same condition.
Remove the unreachable code to avoid the warning.

Fixes: CID 1394215
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-16 11:19:10 +10:00
BALATON Zoltan
593a1cdd66 sm501: Update screen on frame buffer address change
When the guest changes the address of the frame buffer we need to
refresh the screen to correctly display the new content. This fixes
display update problems when changing between screens on AmigaOS.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-16 11:18:09 +10:00
BALATON Zoltan
eb76243c9d sm501: Set updated region dirty after 2D operation
Set the changed memory region dirty after performed a 2D operation to
ensure that the screen is updated properly.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
BALATON Zoltan
33159dd7ce sm501: Fix support for non-zero frame buffer start address
Display updates and drawing hardware cursor did not work when frame
buffer address was non-zero. Fix this by taking the frame buffer
address into account in these cases. This fixes screen dragging on
AmigaOS. Based on patch by Sebastian Bauer.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
Sebastian Bauer
06cb926aaa sm501: Log unimplemented raster operation modes
The sm501 currently implements only a very limited set of raster operation
modes. After this change, unknown raster operation modes are logged so
these can be easily spotted.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
Sebastian Bauer
debc7e7dad sm501: Implement negated destination raster operation mode
Add support for the negated destination operation mode. This is used e.g.
by AmigaOS for the INVERSEVID drawing mode. With this change, the cursor
in the shell and non-immediate window adjustment are working now.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
Sebastian Bauer
54b2a4339c sm501: Use values from the pitch register for 2D operations
Before, crt_h_total was used for src_width and dst_width. This is a
property of the current display setting and not relevant for the 2D
operation that also can be done off-screen. The pitch register's purpose
is to describe line pitch relevant of the 2D operation.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
Sebastian Bauer
d27335592a sm501: Perform a full update after palette change
Changing the palette of a color index has as an immediate effect on
all pixels with the corresponding index on real hardware. Performing a
full update after a palette change is a simple way to emulate this
effect.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
BALATON Zoltan
4a1f253adb sm501: Implement i2c part for reading monitor EDID
Emulate the i2c part of SM501 which is used to access the EDID info
from a monitor.

The vmstate structure is changed and its version is increased but
SM501 is only used on SH and PPC sam460ex machines that don't support
cross-version migration.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07 12:12:27 +10:00
Peter Maydell
79c2b203a9 vga: disable global_vmstate, virtio-gpu scanout tracking fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbO0WYAAoJEEy22O7T6HE4omoP/R0aKyojHVxWeL4OK5JxfTJP
 VfEu1JCYhyXhn5KQpnSTyuklr2PuM6Wq89fBx2Rcrvi2RlKfxg1t1hMT10Vmev7R
 CIgyZfxBicIInzU8bFB0d7lS9jPPAIJNuZTCEob/+sE72RK8a2TUT+agpgzfBiC8
 z4D8UU766n/BoyeiFeFeM7HIEe4fl75bqzUW+PHLqoW5HDiz05tBEAhOlPJXrJeM
 35tp8aNUcRFCb8K95bBstDbTgCFlChVNN99+5CQ2rCokPXegW1ldCfRCpXVSuigm
 KT4T073b8/pfrGxiNpKDs1zV5N2Om6g25CLBi1KztenOlT7iancAI72uWxFasc/I
 0VNIZQCMYeR6r8OcUBgquxYQG8JAHf8oNcmqU97UE4jFWY/K/O+WLmwzhw9aifib
 An3bsmo76Q0JTPmqMhbEGpjSM8DygKHqMnXy1Tzzi6EKOQMjnRDFT1uexRH/HPo6
 hdaKUfyeMIY9U6n+YA8VrBn/5BnpsucEpKjMB7KxlyL+NwRVdXQ8axz7SnXkJrHY
 vdobSzQs0TBA7oo0mnWR9AF+MG2yr/bb5yFwTVsg82kexmPw90oVyisIpExNZyTg
 vnrsfdSyGvpGLP9ganMSfgA9TQ+xUORrHp9cZM3yHKrmh5C3w65ynbA4LXsYwJ0h
 HlI+MNbhTjw0P4Iws/PX
 =Xwx6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180703-pull-request' into staging

vga: disable global_vmstate, virtio-gpu scanout tracking fixes.

# gpg: Signature made Tue 03 Jul 2018 10:44:56 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180703-pull-request:
  vga: disable global_vmstate for 3.0+ machine types
  virtio-gpu: disable scanout when backing resource is destroyed
  virtio-gpu: update old resource too.
  virtio-gpu: tweak scanout disable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/display/qxl.c
#	hw/display/vga-isa-mm.c
2018-07-03 21:09:27 +01:00
Gerd Hoffmann
1fcfdc435a vga: disable global_vmstate for 3.0+ machine types
Move global_vmstate from vga_common_init() parameter to VGACommonState
field.  Set global_vmstate to true for isa vga devices, so nothing
changes here.  virtio-vga and secondary-vga already set global_vmstate
to false so no change here either.  All other pci vga devices get a new
global-vmstate property, defaulting to false.  A compat property flips
it to true for older machine types.

With this in place you don't get a vmstate section naming conflict any
more when adding multiple pci vga devices to your vm.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
2018-07-03 11:19:49 +02:00
Gerd Hoffmann
1fccd7c5a9 virtio-gpu: disable scanout when backing resource is destroyed
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-4-kraxel@redhat.com
2018-07-03 11:19:39 +02:00
Gerd Hoffmann
c806cfa036 virtio-gpu: update old resource too.
When switching scanout from one resource to another we must update the
scanout_bitmask field for both new (set bit) and old (clear bit)
resource.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-3-kraxel@redhat.com
2018-07-03 11:19:39 +02:00
Gerd Hoffmann
da566a18a7 virtio-gpu: tweak scanout disable.
- Factor out the code to virtio_gpu_disable_scanout().
- Allow disable scanout 0, show a message then.
- Clear scanout->resource_id.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180702162443.16796-2-kraxel@redhat.com
2018-07-03 11:19:39 +02:00
Peter Maydell
e8c858944e * IEC units series (Philippe)
* Hyper-V PV TLB flush (Vitaly)
 * git archive detection (Daniel)
 * host serial passthrough fix (David)
 * NPT support for SVM emulation (Jan)
 * x86 "info mem" and "info tlb" fix (Doug)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbOkI9AAoJEL/70l94x66DaA0IAIzJD+3hUdwDCqitlW65x/yX
 D+KAoX4Ytpz7+QOtcXC7BBUW3JwvHTS5sfuvaAqKWnqEXSDrQs4/gG2iEB1UJ3Ko
 hC2LHGKygdcD9k3vuQ2q2USOu08jEUYRvvjgHmD6lsyaAQ+cb2heAYz/SxQqbkkt
 qun6TFaWuTGBQF1qy0xjJitdPokGwFZgprlZyVmMId/yLlsbsFlwmGIJh/l1+zqw
 I4DBzRzuhAg/nLH9qVZ3LWOjH1H0MLPGBUG59w4GbIDpwRh1VZu+GTyAmAYaquHl
 dSHYweXywNTvhi0WLroP8SD0Nqf/ZObuSRtop60gqJuP3YAbPrBMeRTlsqoZIRE=
 =Xzc8
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* IEC units series (Philippe)
* Hyper-V PV TLB flush (Vitaly)
* git archive detection (Daniel)
* host serial passthrough fix (David)
* NPT support for SVM emulation (Jan)
* x86 "info mem" and "info tlb" fix (Doug)

# gpg: Signature made Mon 02 Jul 2018 16:18:21 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (50 commits)
  tcg: simplify !CONFIG_TCG handling of tb_invalidate_*
  i386/monitor.c: make addresses canonical for "info mem" and "info tlb"
  target-i386: Add NPT support
  serial: Open non-block
  bsd-user: Use the IEC binary prefix definitions
  linux-user: Use the IEC binary prefix definitions
  tests/crypto: Use the IEC binary prefix definitions
  vl: Use the IEC binary prefix definitions
  monitor: Use the IEC binary prefix definitions
  cutils: Do not include "qemu/units.h" directly
  hw/rdma: Use the IEC binary prefix definitions
  hw/virtio: Use the IEC binary prefix definitions
  hw/vfio: Use the IEC binary prefix definitions
  hw/sd: Use the IEC binary prefix definitions
  hw/usb: Use the IEC binary prefix definitions
  hw/net: Use the IEC binary prefix definitions
  hw/i386: Use the IEC binary prefix definitions
  hw/ppc: Use the IEC binary prefix definitions
  hw/mips: Use the IEC binary prefix definitions
  hw/mips/r4k: Constify params_size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02 19:07:19 +01:00
Gerd Hoffmann
9f5d9c19c7 ramfb: enable vgabios
Add vgabios binary to fw_cfg vgaroms.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02 17:21:52 +02:00
Gerd Hoffmann
7c538789da bochs-display: enable vgabios
Add vgabios binary to pci rom bar.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02 17:21:52 +02:00
Philippe Mathieu-Daudé
f0353b0d10 hw/display: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20180625124238.25339-15-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:13 +02:00
Philippe Mathieu-Daudé
fc6b3cf9e8 hw: Directly use "qemu/units.h" instead of "qemu/cutils.h"
These files don't use anything exposed by "qemu/cutils.h",
simplify preprocessing including directly "qemu/units.h".

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Message-Id: <20180625124238.25339-7-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:12 +02:00
Philippe Mathieu-Daudé
d23b6caadb hw: Use IEC binary prefix definitions from "qemu/units.h"
Code change produced with:

  $ git ls-files | egrep '\.[ch]$' | \
    xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g'

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Message-Id: <20180625124238.25339-6-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:10 +02:00
Stefan Hajnoczi
f18793b096 compiler: add a sizeof_field() macro
Determining the size of a field is useful when you don't have a struct
variable handy.  Open-coding this is ugly.

This patch adds the sizeof_field() macro, which is similar to
typeof_field().  Existing instances are updated to use the macro.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180614164431.29305-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-27 13:01:40 +01:00
Gerd Hoffmann
6b9b3c1e30 ramfb: fix overflow
> CID 1393621:    (OVERFLOW_BEFORE_WIDEN)
> Potentially overflowing expression "stride * s->height" with type "unsigned
> int" (32 bits, unsigned) is evaluated using +32-bit arithmetic, and then used
> in a context that expects an expression of type "hwaddr" (64 bits, unsigned).

Fix by changing stride from uint32_t to hwaddr.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180626083120.19515-1-kraxel@redhat.com
2018-06-26 16:04:01 +02:00
Gerd Hoffmann
93abfc88bd vga: set owner for mmio regions
This makes sure the regions are properly cleaned when unplugging -device
seconday-vga.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180626060941.8326-1-kraxel@redhat.com
2018-06-26 16:03:40 +02:00
Sebastian Bauer
a69232e2a3 sm501: Fix hardware cursor color conversion
According to the sm501 specs the hardware cursor colors are to be given in
the rgb565 format, but the code currently interprets them as bgr565.

Therefore, the colors of the hardware cursors are wrong in the QEMU
display, e.g., the standard mouse pointer of AmigaOS appears blue instead
of red. This change fixes this issue by replacing the existing naive
bgr565 => rgb888 conversion with a standard rgb565 => rgb888 one that also
scales the color component values properly.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-21 21:22:53 +10:00
Peter Maydell
59926de998 vga: add ramfb, print virglrenderer version
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbJ4ISAAoJEEy22O7T6HE4vJsP/11VphYRW9cd7E0+wuH4zqb/
 r0x540BQ+TH8+xVaZDMJgQuwLUFnq/3dWO4ImOSblZs+MD/ojk0XNw8tWLxqAVjk
 CrSA0aZj4tT+Dwpx6ylC+ta6klDr8Y75dK2Zo9ZJrDy3aniqTQNk7QyLuFcrlfPk
 QBJm3J/lrbwTwtFEG9lXe5jZud5eR2rZsPXljuCPAAiIy3WdOMA57OZwND+zngW8
 QCYJH+2K41BXta9o5jKmhDNFc24nnYFtoo9xpZp0S0mP5TKzMP6zmI/JtP270FhC
 KvX4SFgqs2zuQkgbG4MouoXqKAiY8lgarEdiWggAjacTBEkEZ/nBmVLuN7S5nIoA
 M70b+eriybIVVX7fCe0CykcqxXGnuEEPtLGlZ5vk/rCaZiKGmsFaYYF+xcfswMtz
 gVkgZMSgIoJ0pxc4qKOTxy2J6ZxOc+Dz0NEMSSzv8Y4AwYn5d9b+ri8Zc8jnYzLZ
 EHPv+1zXHwXBmwmKcgysW58b4Z5DGyNShpFTPh74Nep72P68Uf4lQOf+gYyjtIIE
 VJ5sdd0kK5cfQHwKaBHgefnyNSPy6WCu4ogEKs3WQKmNVNFS8Zsl4c5kJhgP5pZz
 IEUGyFDV1+yl3ZUilnj/a02IWNOmkHNXdgSUeveqhiaTzl7DMr8oj3byizVnJ/3J
 T6U1DNus9BS7W+UnH+Fw
 =x6JE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180618-pull-request' into staging

vga: add ramfb, print virglrenderer version

# gpg: Signature made Mon 18 Jun 2018 10:57:38 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180618-pull-request:
  Add ramfb MAINTAINERS entry
  hw/display: add standalone ramfb device
  hw/display: add ramfb, a simple boot framebuffer living in guest ram
  configure: print virglrenderer version

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-19 13:43:35 +01:00
Gerd Hoffmann
94692dcd71 hw/display: add standalone ramfb device
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180613122948.18149-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18 11:22:15 +02:00
Gerd Hoffmann
995b30179b hw/display: add ramfb, a simple boot framebuffer living in guest ram
The boot framebuffer is expected to be configured by the firmware, so it
uses fw_cfg as interface.  Initialization goes as follows:

  (1) Check whenever etc/ramfb is present.
  (2) Allocate framebuffer from RAM.
  (3) Fill struct RAMFBCfg, write it to etc/ramfb.

Done.  You can write stuff to the framebuffer now, and it should appear
automagically on the screen.

Note that this isn't very efficient because it does a full display
update on each refresh.  No dirty tracking.  Dirty tracking would have
to be active for the whole ram slot, so that wouldn't be very efficient
either.  For a boot display which is active for a short time only this
isn't a big deal.  As permanent guest display something better should be
used (if possible).

This is the ramfb core code.  Some windup is needed for display devices
which want have a ramfb boot display.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180613122948.18149-2-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18 11:22:15 +02:00
BALATON Zoltan
2100b6b21e sm501: Do not clear read only bits when writing registers
When writing registers that have read only bits we have to avoid
changing these bits as they may have non zero values. Make sure we use
the correct masks to mask out read only and reserved bits when
changing registers.

Also remove extra spaces from dram_control and arbitration_control
assignments.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16 16:32:33 +10:00
Marc-André Lureau
265b578c58 object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().

add_link() doesn't add a reference to the target object, while
set_link() does.

Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.

Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-12 12:07:30 +02:00
Philippe Mathieu-Daudé
f2bbb68628 xilinx-dp: Add trailing '\n' to qemu_log() call
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180606152128.449-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Peter Maydell
5d7ad3ce10 Two little vga fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbFPz1AAoJEEy22O7T6HE42+AP/2/jNWqsXYWNWK14jxCRi50D
 TZpx4t4suUVvH2ZHSKOTbkOsISg4rAceDsoMH25o0w/hZZFUw+aU275+K/wLejQs
 lC3r3Cl0Zs8FNbeRMtw9JIP243hNTuWQhZ1gkIP9zcEpkFY5zik71L/SBb7aYDqb
 ZqXjGGGLVZiDC6WGLebO7orSorr1a86MiAv9tQ9fwELCofaNQzxtcBPMrNmu8T8Z
 3rnZFdjTdSc9A6jlAZP83CR9WRFl5BzJ1cppagHaJIH2YpRgHo4hDd7z+xQpndn3
 jKva+wEYeXuL5PCLk2mKa+3XUPeo3qnROofhogbI8YOORGBgM+efxA7NBAzGrtVa
 n1ZUMc0hYec5/CrHC4U4c/liojT4gXR7xK1senvXnrlwcmXqv3ILOrcugU4c2oMB
 znXOGe++V+RVKYJw2aJCl9/SCJw4taWql4GK7NJSO8+C25IDNaxR/ohX1IvPZDyC
 tlS1v69wZ+o7IyF8B/DZIkswzGvt52WDSdhoA5f4ReeGK/fypuK3VkS4nh63p3OU
 jlf7bvLCGc9RzqwUdj2zWNXKgEA4yOGHYFQ/wGEl3MrKkYzyOoC33ChPUOk5Zn/7
 81Yed9RsAYd0PsT5FLsjhBT2ydOIYg12C+r6MLt4ES2/HKSz86KGY6lMSUHuHd/R
 MHJQ/ihwfUNZGWX7mSQW
 =L6Ri
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180604-pull-request' into staging

Two little vga fixes.

# gpg: Signature made Mon 04 Jun 2018 09:48:53 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180604-pull-request:
  vga: cleanup surface handling
  bochs-display: add missing break

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 15:46:15 +01:00
Peter Maydell
f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00
Gerd Hoffmann
6bc2fd57e1 vga: cleanup surface handling
Just set the full_update flag if we need a new DisplaySurface.  Create
a new surface when the flag is set instead of having two places where
qemu_create_displaysurface_from() is called.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180525131318.28437-1-kraxel@redhat.com
2018-06-04 09:44:10 +02:00
Gerd Hoffmann
bc820db064 bochs-display: add missing break
Fixes: CID 1391291
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180525045344.28347-1-kraxel@redhat.com
2018-06-04 09:44:10 +02:00
Michael S. Tsirkin
e921d6eff9 display: use local path for local headers
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01 19:20:37 +03:00
Paolo Bonzini
b5dfdb082f hw: make virtio devices configurable via default-configs/
This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally.  It is still a
move in the right direction.

Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 15:14:31 +02:00
Philippe Mathieu-Daudé
c8c9e10394 hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init
I2CSlaveClass::init is no more used, remove it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180419212727.26095-3-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180528144509.15812-3-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 15:14:31 +02:00
Philippe Mathieu-Daudé
0304f9ec9c hw: Do not include "sysemu/block-backend.h" if it is not necessary
Remove those unneeded includes to speed up the compilation
process a little bit. (Continue 7eceff5b5a cleanup)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-13-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Philippe Mathieu-Daudé
ab728275e4 hw: Do not include "exec/address-spaces.h" if it is not necessary
Code change produced with:
    $ git grep '#include "exec/address-spaces.h"' hw include/hw | \
      cut -d: -f-1 | \
      xargs egrep -L "(get_system_|address_space_)" | \
      xargs sed -i.bak '/#include "exec\/address-spaces.h"/d'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-12-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Gerd Hoffmann
f2581064a6 bochs-display: add pcie support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180522165058.15404-6-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Gerd Hoffmann
33ebad5405 bochs-display: add dirty tracking support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-5-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Gerd Hoffmann
765c942908 hw/display: add new bochs-display device
After writing up the virtual mdev device emulating a display supporting
the bochs vbe dispi interface (mbochs.ko) and seeing how simple it
actually is I've figured that would be useful for qemu too.

So, here it is, -device bochs-display.  It is basically -device VGA
without legacy vga emulation.  PCI bar 0 is the framebuffer, PCI bar 2
is mmio with the registers.  The vga registers are simply not there
though, neither in the legacy ioport location nor in the mmio bar.
Consequently it is PCI class DISPLAY_OTHER not DISPLAY_VGA.

So there is no text mode emulation, no weird video modes (planar,
256color palette), no memory window at 0xa0000.  Just a linear
framebuffer in the pci memory bar.  And the amount of code to emulate
this (and therefore the attack surface) is an order of magnitude smaller
when compared to vga emulation.

Compatibility wise it works with OVMF (latest git master).
The bochs-drm.ko linux kernel module can handle it just fine too.
So UEFI guests should not see any functional difference to VGA.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-4-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Gerd Hoffmann
83ff909f93 vga-pci: use PCI_VGA_MMIO_SIZE
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180522165058.15404-3-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Gerd Hoffmann
a3ee49f075 vga: move bochs vbe defines to header file
Create a new header file, move the bochs vbe dispi interface
defines to it, so they can be used outside vga code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-2-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Gerd Hoffmann
a89fe6c329 vga: catch depth 0
depth == 0 is used to indicate 256 color modes.  Our region calculation
goes wrong in that case.  So detect that and just take the safe code
path we already have for the wraparound case.

While being at it also catch depth == 15 (where our region size
calculation goes wrong too).  And make the comment more verbose,
explaining what is going on here.

Without this windows guest install might trigger an assert due to trying
to check dirty bitmap outside the snapshot region.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1575541
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180514103117.21059-1-kraxel@redhat.com
2018-05-24 10:42:13 +02:00
Paolo Bonzini
68898bc82b ui: add x_keymap.o to modules
x_keymap.o is common to the SDL and GTK+ modules, and it causes the
QEMU binary to link to the X11 libraries.  Add it separately to the
modules to keep the main QEMU binary smaller.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1526560782-18732-1-git-send-email-pbonzini@redhat.com

[ kraxel: fix lm32 target build (milkymist-tmu2) ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-18 09:13:37 +02:00
Gerd Hoffmann
5bd5c27c7d qxl: fix local renderer crash
Make sure we only ask the spice local renderer for display updates in
case we have a valid primary surface.  Without that spice is confused
and throws errors in case a display update request (triggered by
screendump for example) happens in parallel to a mode switch and hits
the race window where the old primary surface is gone and the new isn't
establisted yet.

Cc: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com//show_bug.cgi?id=1567733
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180427115528.345-1-kraxel@redhat.com
2018-05-07 11:47:57 +02:00
Gerd Hoffmann
fc70514ccf secondary-vga: properly close QemuConsole on unplug
Using the new graphic_console_close() function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-13 11:17:29 -06:00
Gerd Hoffmann
7cdc61becd vga: fix region calculation
Typically the scanline length and the line offset are identical.  But
in case they are not our calculation for region_end is incorrect.  Using
line_offset is fine for all scanlines, except the last one where we have
to use the actual scanline length.

Fixes: CVE-2018-7550
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Tested-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-id: 20180309143704.13420-1-kraxel@redhat.com
2018-03-12 11:45:21 +01:00
Paolo Bonzini
723250d674 g364fb: fix DirtyBitmapSnapshot leak
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:00:58 +01:00
Linus Walleij
a643bd7749 hw/sii9022: Add support for Silicon Image SII9022
This adds support for emulating the Silicon Image SII9022 DVI/HDMI
bridge. It's not very clever right now, it just acknowledges
the switch into DDC I2C mode and back. Combining this with the
existing DDC I2C emulation gives the right behavior on the Versatile
Express emulation passing through the QEMU EDID to the emulated
platform.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-5-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: explictly reset ddc_req/ddc_skip_finish/ddc]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01 11:13:36 +00:00
Dave Airlie
5643cc94ac virtio-gpu-3d: add support for second capability set (v4)
Due to a kernel bug we can never increase the size of capability
set 1, so introduce a new capability set in parallel, old userspace
will continue to use the old set, new userspace will start using
the new one when it detects a fixed kernel.

v2: don't use a define from virglrenderer, just probe it.
v3: fix compilation when virglrenderer disabled
v4: fix style warning, just use ?: op instead.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Message-id: 20180223023814.24459-1-airlied@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26 13:41:34 +01:00
Paolo Bonzini
0fe1eca7dc memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshot
Simplify the users of memory_region_snapshot_and_clear_dirty, so
that they do not have to call memory_region_sync_dirty_bitmap
explicitly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13 16:15:09 +01:00
Paolo Bonzini
f7189ac8e6 g364fb: switch to using DirtyBitmapSnapshot
This removes the last user of memory_region_test_and_clear_dirty
outside memory.c.

Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13 16:15:09 +01:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Marc-André Lureau
6c549dc141 exynos4210: workaround UBSAN compilation error
gcc 5.4.0-6ubuntu1~16.04.5 build with UBSAN enabled error:

  CC      hw/display/exynos4210_fimd.o
/home/petmay01/linaro/qemu-for-merges/hw/display/exynos4210_fimd.c: In
function ‘fimd_get_buffer_id’:
/home/petmay01/linaro/qemu-for-merges/hw/display/exynos4210_fimd.c:1105:5:
error: case label does not reduce to an integer constant
     case FIMD_WINCON_BUF2_STAT:

Because FIMD_WINCON_BUF2_STAT case contains an integer
overflow, use U suffix to get the unsigned type.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05 18:09:45 +01:00
Peter Xu
34e304e975 virtio-gpu: disallow vIOMMU
virtio-gpu has special code path that bypassed vIOMMU protection.  So
for now let's disable iommu_platform for the device until we fully
support that (if needed).

After the patch, both virtio-vga and virtio-gpu won't allow to boot with
iommu_platform parameter set.

CC: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20180131040401.3550-1-peterx@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-02 08:53:22 +01:00
Alistair Francis
07c4a51a29 aarch64-softmmu.mak: Use an ARM specific config
In preperation for having an ARM and MicroBlaze ZynqMP machine let's
split out the current ARM specific config options.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-01-26 11:09:09 +01:00
Peter Maydell
2077fef91d target-arm queue:
* target/arm: Fix address truncation in 64-bit pagetable walks
  * i.MX: Fix FEC/ENET receive functions
  * target/arm: preparatory refactoring for SVE emulation
  * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  * hw/intc/arm_gic: Fix C_RPR value on idle priority
  * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  * hw/arm/virt: Check that the CPU realize method succeeded
  * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
  * xilinx_spips: Correct usage of an uninitialized local variable
  * pl110: Implement vertical compare/next base interrupts
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJaadStAAoJEDwlJe0UNgzeABwP/jJs1ajbRnnwr2eFYno9Wa7p
 jpSHD/4pxMbZVYAPrc5z+EoPw8Fy/qETlzRLlcO4KfmrxHotpoKEPAQBIOohs7Uy
 PZgPhVqic1hAQBlp2wkK9SSL5XFyfI0PHCY3Rb0dGWPSu5eoLlXCglbgajOBbM9r
 t/0KUQPhILfYeDbZ7oO6XLC51F87M0zxmE5GG2Z8feHDSw2zqmZc/jw8nGNkQXKr
 0gniMN2QQyxKEjp6zYa9lmCnvpBMErKo3xl9J3tZ2TgzOSWaX0S1gk3FWh0kNYhk
 ktnnimUzku/gOoCorMf5o7nPCNQqpR4Jgpw3S27j7WfgxGyrgfxT74k4XR/g8nNO
 LGkNzlsdEjHpVe8wTPQZ4LtPcw8ozHQB/Yu77iRaweQipk6PeyoUuoMDrxHq0oX6
 W9rgvwmOJu2xmHyUe1NZuUwiZ9xdidlFg+9TMENLkbzb2xzxYa1qmbVQz7u5d7cx
 zPgy9iy7S77wAwPwHgul3sQlVLxxKSi7Iw+Ka+51uEJ3pbW/JPpZCATi00LGjQZF
 41j5wOPj/LR+B0peay4cneF9DDR5Vxqe+Lg1QMicaj74xP1Q+dvVwvE5e3/XUaiT
 nr42iNjK0HJCqyvvkd6u/ONW8rbSmeL5FF5eEzC6DxAArTBkdJ90tFklinMH/Ovy
 oaBPvo5zP8TSqwDMx6yc
 =aF9Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180125' into staging

target-arm queue:
 * target/arm: Fix address truncation in 64-bit pagetable walks
 * i.MX: Fix FEC/ENET receive functions
 * target/arm: preparatory refactoring for SVE emulation
 * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
 * hw/intc/arm_gic: Fix C_RPR value on idle priority
 * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
 * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
 * hw/arm/virt: Check that the CPU realize method succeeded
 * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
 * xilinx_spips: Correct usage of an uninitialized local variable
 * pl110: Implement vertical compare/next base interrupts

# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
  pl110: Implement vertical compare/next base interrupts
  xilinx_spips: Correct usage of an uninitialized local variable
  sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
  hw/arm/virt: Check that the CPU realize method succeeded
  hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  hw/intc/arm_gic: Fix C_RPR value on idle priority
  hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  target/arm: Simplify fp_exception_el for user-only
  target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
  target/arm: Move cpu_get_tb_cpu_state out of line
  target/arm: Add ARM_FEATURE_SVE
  vmstate: Add VMSTATE_UINT64_SUB_ARRAY
  target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
  target/arm: Change the type of vfp.regs
  target/arm: Use pointers in neon tbl helper
  target/arm: Use pointers in neon zip/uzp helpers
  target/arm: Use pointers in crypto helpers
  target/arm: Mark disas_set_insn_syndrome inline
  i.MX: Fix FEC/ENET receive funtions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 17:04:47 +00:00
Linus Walleij
24da047af0 pl110: Implement vertical compare/next base interrupts
This implements rudimentary support for interrupt generation on the
PL110. I am working on a new DRI/KMS driver for Linux and since that
uses the blanking interrupt, we need something to fire here. Without
any interrupt support Linux waits for a while and then gives ugly
messages about the vblank not working in the console (it does not
hang perpetually or anything though, DRI is pretty forgiving).

I solved it for now by setting up a timer to fire at 60Hz and pull
the interrupts for "vertical compare" and "next memory base"
at this interval. This works fine and fires roughly the same number
of IRQs on QEMU as on the hardware and leaves the console clean
and nice.

People who want to create more accurate emulation can probably work
on top of this if need be. It is certainly closer to the hardware
behaviour than what we have today anyway.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180123225654.5764-1-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: folded long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00
linzhecheng
191f59dc17 vga: check the validation of memory addr when draw text
Start a vm with qemu-kvm -enable-kvm -vnc :66 -smp 1 -m 1024 -hda
redhat_5.11.qcow2  -device pcnet -vga cirrus,
then use VNC client to connect to VM, and excute the code below in guest
OS will lead to qemu crash:

int main()
 {
    iopl(3);
    srand(time(NULL));
    int a,b;
    while(1){
	a = rand()%0x100;
	b = 0x3c0 + (rand()%0x20);
        outb(a,b);
    }
    return 0;
}

The above code is writing the registers of VGA randomly.
We can write VGA CRT controller registers index 0x0C or 0x0D
(which is the start address register) to modify the
the display memory address of the upper left pixel
or character of the screen. The address may be out of the
range of vga ram. So we should check the validation of memory address
when reading or writing it to avoid segfault.

Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-id: 20180111132724.13744-1-linzhecheng@huawei.com
Fixes: CVE-2018-5683
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-25 10:18:39 +01:00
Peter Maydell
52483b067c Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
 maintainer feels really responsible for picking up.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJaZcaYAAoJEC7Z13T+cC21ab0P/3fE52pp0BEWRfM3MkTyJCgs
 c3ZDR2raLsrwl5MMoeV6TCZ8ILp3RR5ipdnpsxAlUKi0e953hduFXJ/A9meElogu
 i1BdCl7SBYUWXg9WKqH5cX9LGiGiRLQ53KehCB6wa4nXBjkL1bGtbprbp5kCb+Sn
 tavBoIqkwxC2VvqJHL23uS7n/3bPkr4XA1bA/VWezm7be6f5bEqBzORdxPabRC3f
 M7b1ntl2Xj9PXpwKZkHgET8Wg1Ne5kCUvvx9o22iMuHhBHsxAmMc06Q96wihDUI3
 /CwzaErGrykGRX95y++yaBMUEYMSk90dv9cXHTMryDw/0id0OMnpcGm6SeQHlcQT
 ATrhnH1VzEcgGJPYpqKxNvb0pJZ7t7gYUSi0HMC83PG2S9wD/kBvtB8rqumTolKB
 cvI6l7PFfCZIr3FsTyGHX1KVRHX8PWljnKIvAbyUEuK4XDnSX7hT+7jQvuxj4HSZ
 /ZlksnSIHcUf5gx6zG2StVKo5TEnY6JUhf8CuQeILW0ZGj6V/aUFbR5aMmgVinyj
 p/2OOUsze6rYCcpVE2kI7hSMrSXk4QfvPyIvjGf86EVxTM4SK03bP4QVFwtZtFzA
 HXXFIgKNcE7I7BhghC6PLcmHaYBiK8A5EIvXpgi4tD7L3PFLos6wtR6T2ze3mBn2
 JyKxGw9rExlAJMi5/WE9
 =JCAM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' into staging

Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.

# gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT
# gpg:                using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg:                 aka "Thomas Huth <thuth@redhat.com>"
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>"
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth/tags/pull-request-2018-01-22:
  hw/isa: Replace fprintf(stderr, "*\n" with error_report()
  hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()
  hw/bt: Replace fprintf(stderr, "*\n" with error_report()
  Fixes after renaming __FUNCTION__ to __func__
  Replace all occurances of __FUNCTION__ with __func__
  tests/cpu-plug-test: Test CPU hot-plugging on s390x
  tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too
  tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too
  tests: Rename pc-cpu-test.c to cpu-plug-test.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-23 10:15:09 +00:00
Alistair Francis
a89f364ae8 Replace all occurances of __FUNCTION__ with __func__
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.

One line in hcd-musb.c was manually tweaked to pass checkpatch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22 09:46:18 +01:00
BALATON Zoltan
cf4969ec35 sm501: Add missing break to case
Noticed by Coverity, forgotten in 5690d9ece

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-20 17:15:05 +11:00
Peter Maydell
c1d5b9add7 * QemuMutex tracing improvements (Alex)
* ram_addr_t optimization (David)
 * SCSI fixes (Fam, Stefan, me)
 * do {} while (0) fixes (Eric)
 * KVM fix for PMU (Jan)
 * memory leak fixes from ASAN (Marc-André)
 * migration fix for HPET, icount, loadvm (Maria, Pavel)
 * hflags fixes (me, Tao)
 * block/iscsi uninitialized variable (Peter L.)
 * full support for GMainContexts in character devices (Peter Xu)
 * more boot-serial-test (Thomas)
 * Memory leak fix (Zhecheng)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJaXgkRAAoJEL/70l94x66DA3EIAI8z8Y+1NAmbLqiHhrrN9Ji/
 b8EHQ8wf0pwwrHuRVKYZvKUU8yvp/CRIoVWZwfeGjRbZC+l7l+BAwdOx42Bj/dUW
 VopNzcJMu3s5SNwoYLvs01OjhciBYNXWTXBkIiErwurF0Ow7oYR7trkLwOw0veSO
 L4qFAGoIBI/7b6BZ3YRQXshhzdSQ6dvHrDness2V1c0crLG+yhvjKJ8PJ2tJyNZO
 DbsrCd7hS6e6liSUqdLj9XgRySFj9R5kgjaLjckjg1SC6kmhLN9hyke8iXgH7uvz
 WGnRPmKjKexFHVYgR0rRFlazcQclAczHuIi/OZe0HLi6trg2YKBkolMaQLQdgfk=
 =HTyS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* QemuMutex tracing improvements (Alex)
* ram_addr_t optimization (David)
* SCSI fixes (Fam, Stefan, me)
* do {} while (0) fixes (Eric)
* KVM fix for PMU (Jan)
* memory leak fixes from ASAN (Marc-André)
* migration fix for HPET, icount, loadvm (Maria, Pavel)
* hflags fixes (me, Tao)
* block/iscsi uninitialized variable (Peter L.)
* full support for GMainContexts in character devices (Peter Xu)
* more boot-serial-test (Thomas)
* Memory leak fix (Zhecheng)

# gpg: Signature made Tue 16 Jan 2018 14:15:45 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (51 commits)
  scripts/analyse-locks-simpletrace.py: script to analyse lock times
  util/qemu-thread-*: add qemu_lock, locked and unlock trace events
  cpu: flush TB cache when loading VMState
  block/iscsi: fix initialization of iTask in iscsi_co_get_block_status
  find_ram_offset: Align ram_addr_t allocation on long boundaries
  find_ram_offset: Add comments and tracing
  cpu_physical_memory_sync_dirty_bitmap: Another alignment fix
  checkpatch: Enforce proper do/while (0) style
  maint: Fix macros with broken 'do/while(0); ' usage
  tests: Avoid 'do/while(false); ' in vhost-user-bridge
  chardev: Clean up previous patch indentation
  chardev: Use goto/label instead of do/break/while(0)
  mips: Tweak location of ';' in macros
  net: Drop unusual use of do { } while (0);
  irq: fix memory leak
  cpus: unify qemu_*_wait_io_event
  icount: fixed saving/restoring of icount warp timers
  scripts/qemu-gdb/timers.py: new helper to dump timer state
  scripts/qemu-gdb: add simple tcg lock status helper
  target-i386: update hflags on Hypervisor.framework
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16 15:45:15 +00:00
Eric Blake
2562755ee7 maint: Fix macros with broken 'do/while(0); ' usage
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'.  Although our coding style frowns on brace-less 'if':
  if (cond)
    statement;
  else
    something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'.  But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'.  Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.

The change should have no semantic impact.  I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.

Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16 14:54:52 +01:00
Frediano Ziglio
9fedfa4909 spice: remove QXLWorker interface field
This fields points to an old interface that is no more
used in the current code.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:35:58 +01:00
BALATON Zoltan
5690d9ecef sm501: Add some more unimplemented registers
These are not really implemented (just return zero or default values)
but add these so guests accessing them can run.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10 12:52:59 +11:00
BALATON Zoltan
a45de1794e sm501: Add panel hardware cursor registers also to read function
These were forgotten when adding panel layer support in ffd3925701
"SM501 emulation for R2D-SH4".

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[dwg: Added reference to earlier commit in message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10 12:52:59 +11:00
Philippe Mathieu-Daudé
866e2b3727 hw/display/vga: extract public API from i386/pc to "hw/display/vga.h"
and remove the old i386/pc dependency.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Philippe Mathieu-Daudé
e07b15891e hw/display/vga: "vga_int.h" requires "ui/console.h"
since The VGACommonState struct has a GraphicHwOps *hw_ops member,
then remove the now unnecessary includes.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Philippe Mathieu-Daudé
d10d69e39d hw/display/vga: "vga.h" only contains registers defs, rename it "vga_regs.h"
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18 17:07:02 +03:00
Peter Maydell
1c3b51a796 Xen 2017/12/14
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaMxayAAoJEIlPj0hw4a6Qkn8P/2Zqb7DX6mXhJgKrIcDSwchb
 txNxIFjpWddAzx2G4bAVF8xWmveBrC8Z5rnIrctcxW8m/ejiL5j946minp0VD5dc
 K97189NNUtd6aYMgDd0y/vxMTo47TYLqBwEjLaR4YxOg4t9HOqN2hPfO0TZ8d83o
 qkH/A1Y7EncipqS3nDmh1eqJfLaVuk5DJxLUpIpLTN55Ni+DWqkPwFbzCznOXgRn
 gzChSzjnsVE/y12YnNBDJIV5ZXt0hSNWvNsQzH5NgSfXfybmlKAjqKCpPRmZ7zzJ
 XgKF+pjShCeptiTjYGfrwMTMGrhzjLcp3WljpXWAavy6en5H3pGj2R8LuPR82jyy
 EL3IFTnGHT4Ax8ZiX4954igB/rdynbx8QAqQwnRUR2lBZXP3ZoUH2F0HL5I5Fy5U
 P4AZJ5MpcAELw44YAI2NFU+QutKR5bJbndFknUi5Vuj9sIvR1pQtnPDjzmKIQ0Wb
 LhrUXL9BPhuSI+YBxBMCSNRNJtWwLTEXJ3Fi9L7tn3KYP86g9q9YFv1Ronh/oxfs
 GsNxuj65KIrGhw42apTwjf4bMF1zjJhJAhbr4kctD5zt26rp8IoQSAjB0W0Fh6E3
 seZA03HNJqRUybUxueDb5gx/8knK9uvQhOxSbm23Pnld860R2HB/02to84eI5uPZ
 yu0Khgyo/yhg0gTCZeRo
 =FtCu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20171214-tag' into staging

Xen 2017/12/14

# gpg: Signature made Fri 15 Dec 2017 00:26:26 GMT
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg:                 aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20171214-tag:
  xen/pt: Set is_express to avoid out-of-bounds write
  xenfb: activate input handlers for raw pointer devices
  xenfb: Add [feature|request]-raw-pointer
  xenfb: Use Input Handlers directly
  ui: generate qcode to linux mappings
  xen-disk: use an IOThread per instance

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-15 09:52:07 +00:00
Owen Smith
d12c5b7ddf xenfb: activate input handlers for raw pointer devices
If the frontend requests raw pointers, the input handlers must be
activated to have the input events delivered to the xenfb backend.
Without activation, the input events are delivered to handlers
registered earlier, which would be the emulated USB tablet or
emulated PS/2 mouse.
HVM xen_kbdfront can incorrectly scale absolute coordinates when
the display resolution is not 800x600.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-12-14 15:24:43 -08:00
Owen Smith
34975e536f xenfb: Add [feature|request]-raw-pointer
Writes "feature-raw-pointer" during init to indicate the backend
can pass raw unscaled values for absolute axes to the frontend.
Frontends set "request-raw-pointer" to indicate the backend should
not attempt to scale absolute values to console size.
"request-raw-pointer" is only valid if "request-abs-pointer" is
also set. Raw unscaled pointer values are in the range [0, 0x7fff]

"feature-raw-pointer" and "request-raw-pointer" added to Xen
header in commit 7868654ff7fe5e4a2eeae2b277644fa884a5031e

Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-12-14 15:24:37 -08:00
Owen Smith
a1ccbafded xenfb: Use Input Handlers directly
Avoid the unneccessary calls through the input-legacy.c file by
using the qemu_input_handler_*() calls directly. This did require
reworking the event and sync handlers to use the reverse mapping
from qcode to linux using qemu_input_qcode_to_linux().
Removes the scancode2linux mapping, and supporting documention.

Signed-off-by: Owen Smith <owen.smith@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-12-14 15:24:33 -08:00
Prasad J Pandit
d6c3768b32 hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
The ctz32() routine could return a value greater than
TC6393XB_GPIOS=16, because the device has 24 GPIO level
bits but we only implement 16 outgoing lines. This could
lead to an OOB array access. Mask 'level' to avoid it.

Reported-by: Moguofang <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171212041539.25700-1-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-13 17:59:26 +00:00
Peter Maydell
4e8a737c09 vga: bugfixes for 2.11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJaBakGAAoJEEy22O7T6HE4BvAQAKyFKukXChjmiM1+DLI/k1L2
 sVlu1yFECNnXfm5oSHF9SWIoZliD7PG3KbAoiwaba8bPKXN8oaCajptyWwTciWrD
 jj1ZUrq13Uz2oVMPciLT4UuEwrBogCMAiCn+QJdBoQZsK85O1mKmdUhH8kyYejtB
 NrmBJKy6xGTeFd2DJGB2MTqdLv9tx+BSxo/X9quWjxZCVE1pXsEez90ECjTqL6pt
 JEJLVhQgmoZ+F+P48tmGtIq4vdnqFNSIn8aMSemOxHixabtEO+YJTRwuZfh0+pnR
 UxKfabYuInG9YArva4p6dvlCFx8f1tKNkIi96BX0UQ+HPeAzgcZG1ygF7PJqqDla
 whOLRdv/+IwtZxbcbaEh/tkcNzXhNFF18meglG9ncnkRUPNupaWBxbuT3KDLPiSW
 3DXqBYZMBht29UukU0tyB6tBAJm48NIJX0+S6PhjtpM5CDB9bgAIOycFTQxYTBCf
 M24PPM8mMoG5jJo2NRcAbkwI63XQwPJuPToWxfCNPWQSncDutD2/IH753Rt3CTAV
 JQjgBHE90gTl99a03tGZ6R8jtYBd2Eahkpvrix9b16YduqyP7t8uhuw9VRFmsAaE
 guhIFV/BA0yOueo1PapKuATN4QowMclQVw/ZGXirDkZ7/HRRFxp8Dpck2vO1eX4S
 gTaiMDTMjuLyIDw6VfuJ
 =VUIS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20171110-pull-request' into staging

vga: bugfixes for 2.11

# gpg: Signature made Fri 10 Nov 2017 13:26:30 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20171110-pull-request:
  vmsvga: use ARRAY_SIZE macro
  vga: fix region checks in wraparound case
  virtio-gpu: fix bug in host memory calculation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13 14:33:29 +00:00
Philippe Mathieu-Daudé
cf7040e284 vmsvga: use ARRAY_SIZE macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170718061005.29518-23-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 14:25:56 +01:00
Gerd Hoffmann
115788d7a7 vga: fix region checks in wraparound case
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20171030102830.4469-1-kraxel@redhat.com
2017-11-10 11:26:55 +01:00
Tao Wu
c53f5b89f1 virtio-gpu: fix bug in host memory calculation.
The old code treats bits as bytes when calculating host memory usage.
Change it to be consistent with allocation logic in pixman library.

Signed-off-by: Tao Wu <lepton@google.com>
Message-Id: <20171109181741.31318-1-lepton@google.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 11:05:19 +01:00
Thomas Huth
79b217dedb hw/display/sm501: Fix comment in sm501_sysbus_class_init()
The "cannot_instantiate_with_device_add_yet" flag has been renamed
to "user_creatable" a while ago.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-11-08 13:21:37 +11:00
Gerd Hoffmann
eb38e1bc37 cirrus: fix oob access in mode4and5 write functions
Move dst calculation into the loop, so we apply the mask on each
interation and will not overflow vga memory.

Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Niu Guoxiang <niuguoxiang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171011084314.21752-1-kraxel@redhat.com
2017-10-17 09:59:00 +02:00
Gerd Hoffmann
b0898b42ef vga: add ram_addr_t cast
Reported by Coverity.

Fixes: CID 1381409
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010141323.14049-4-kraxel@redhat.com
2017-10-17 09:59:00 +02:00
Gerd Hoffmann
28f77de26a vga: handle cirrus vbe mode wraparounds.
Commit "3d90c62548 vga: stop passing pointers to vga_draw_line*
functions" is incomplete.  It doesn't handle the case that the vga
rendering code tries to create a shared surface, i.e. a pixman image
backed by vga video memory.  That can not work in case the guest display
wraps from end of video memory to the start.  So force shadowing in that
case.  Also adjust the snapshot region calculation.

Can trigger with cirrus only, when programming vbe modes using the bochs
api (stdvga, also qxl and virtio-vga in vga compat mode) wrap arounds
can't happen.

Fixes: CVE-2017-13672
Fixes: 3d90c62548
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010141323.14049-3-kraxel@redhat.com
2017-10-17 09:59:00 +02:00
Gerd Hoffmann
362f811793 vga: drop line_offset variable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-17 09:58:37 +02:00
Eduardo Habkost
fd3b02c889 pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:43 +03:00
Dr. David Alan Gilbert
2f168d0708 migration: Route more error paths
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up;  there are lots
of more complex cases where their own error paths need fixing.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Commit message fix up as Peter's review
2017-09-27 11:44:18 +01:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Thomas Huth
e837acfda1 hw/display/virtio-gpu: Put the virtio-gpu-device into the display category
The virtio-gpu-pci device is already in the display category, so the
virtio-gpu-device should be there, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26 09:11:22 +03:00
Liang Yan
6ec83befe1 hw/display/xenfb.c: Add trace_xenfb_key_event
It may be better to add a trace event to monitor the last moment of
a key event from QEMU to guest VM

Signed-off-by: Liang Yan <lyan@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-26 09:06:02 +03:00
Farhan Ali
1715d6b59c virtio-gpu: Handle endian conversion
Virtio GPU code currently only supports litte endian format,
and so using the Virtio GPU device on a big endian machine
does not work.

Let's fix it by supporting the correct host cpu byte order.

Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Message-Id: <dc748e15f36db808f90b4f2393bc29ba7556a9f6.1505485574.git.alifm@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:32 +02:00
Gerd Hoffmann
79d16c21a5 virtio-gpu: don't clear QemuUIInfo information on reset
Don't reset window layout information (passed via virtio_gpu_ui_info) on
device reset, so the user interface window layout will be kept intact
over reboots.  The head size and position was commented out already, so
this patch just drops the dead code.  Additionally the enabled head mask
must be kept so multihead setups work properly too.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1460595
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142058.2460-1-kraxel@redhat.com
2017-09-13 09:39:32 +02:00
Dr. David Alan Gilbert
138bc2df84 vga/migration: Update memory map in post_load
After migration the chain4 alias mapping added by 80763888 (in 2011)
might be missing, since there's no call to vga_update_memory_access
in the post_load after the registers are updated.  Add it back.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20170804113329.13609-1-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-01 13:52:43 +02:00
Gerd Hoffmann
b21330b513 qxl: add support for chunked cursors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828123933.30323-3-kraxel@redhat.com
2017-09-01 13:52:43 +02:00
Gerd Hoffmann
79c5a10cdd qxl: drop mono cursor support
The chunk size sanity check in qxl_render_cursor works for
SPICE_CURSOR_TYPE_ALPHA cursors only.  So support for
SPICE_CURSOR_TYPE_MONO cursors must be broken for ages without anyone
noticing.  Most likely it simply isn't used any more by guest drivers.
Drop the dead code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828123933.30323-2-kraxel@redhat.com
2017-09-01 13:52:43 +02:00
Gerd Hoffmann
3d90c62548 vga: stop passing pointers to vga_draw_line* functions
Instead pass around the address (aka offset into vga memory).
Add vga_read_* helper functions which apply vbe_size_mask to
the address, to make sure the address stays within the valid
range, similar to the cirrus blitter fixes (commits ffaf857778
and 026aeffcb4).

Impact:  DoS for privileged guest users.  qemu crashes with
a segfault, when hitting the guard page after vga memory
allocation, while reading vga memory for display updates.

Fixes: CVE-2017-13672
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828122906.18993-1-kraxel@redhat.com
2017-09-01 13:52:43 +02:00
Gerd Hoffmann
e65294157d vga: fix display update region calculation (split screen)
vga display update mis-calculated the region for the dirty bitmap
snapshot in case split screen mode is used.  This can trigger an
assert in cpu_physical_memory_snapshot_get_dirty().

Impact:  DoS for privileged guest users.

Fixes: CVE-2017-13673
Fixes: fec5e8c92b
Cc: P J P <ppandit@redhat.com>
Reported-by: David Buchanan <d@vidbuchanan.co.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170828123307.15392-1-kraxel@redhat.com
2017-09-01 13:52:43 +02:00
Marc-André Lureau
e5f9903748 virtio-gpu: use DIV_ROUND_UP
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31 12:29:07 +02:00
Marc-André Lureau
2c23ce22c6 vga: use DIV_ROUND_UP
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31 12:29:07 +02:00
Paolo Bonzini
47025a0193 qxl: call qemu_spice_display_init_common for secondary devices
Fixes this 2.10 regression:

  $ qemu-system-x86_64  -cpu host -m 6144 -vga qxl -device qxl
  qemu-system-x86_64: util/qemu-thread-posix.c:64: qemu_mutex_lock: Assertion `mutex->initialized' failed.

Reported-by: ademaria@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170814231552.24593-1-pbonzini@redhat.com
Cc: kraxel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-15 15:04:51 +01:00
Vladimir Sementsov-Ogievskiy
8908eb1a4a trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
 #!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
    for line in fileinput.input(fname, inplace=True):
        arr = re.split(rgroup, line)
        for i in range(0, len(arr), 2):
            arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

        sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Vladimir Sementsov-Ogievskiy
db73ee4bc8 trace-events: fix code style: %# -> 0x%
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.

This patch is created by the following:

check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56

check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0

check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0

fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'

[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 12:13:07 +01:00
Philippe Mathieu-Daudé
87e0331c5a docs: fix broken paths to docs/devel/tracing.txt
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31 13:12:53 +03:00
Peter Maydell
4c4414a438 hw/display/sm501: Don't use vmstate_register_ram_global()
The sm501 device uses vmstate_register_ram_global() to register its
memory region for migration.  This means it gets a name that is
assumed to be global to the whole system, which in turn means that if
you create two of the device we assert because of the duplication:

qemu-system-ppc -device sm501 -device sm501
RAMBlock "sm501.local" already registered, abort!
Aborted (core dumped)

Changing this to just use memory_region_init_ram()'s automatic
registration of the memory region with a device-local name fixes
this.  The downside is that it breaks migration compatibility, but
luckily we only added migration support to this device in the 2.10
release cycle so we haven't released a QEMU version with the broken
implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1500309462-12792-1-git-send-email-peter.maydell@linaro.org
2017-07-25 13:04:28 +01:00
Peter Maydell
df55c7e8c8 virtio-gpu migration fix for 2.10
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZbIZdAAoJEEy22O7T6HE4legP/3V4lFzuVQquaJZcMG6EFiUx
 bpvQ63hFNRdpB/TglgqR66ijut1TwoC7N9AzeTTDYaze2sywNq32ySmqSQWLZUiN
 oKHl6Oo7s5YVLNj2qtCRHtJIaqurWjWun7ayGei9Q8hTpsbD7DeZiUHMWBusNc6y
 xhhttuzZnAhywm2vuQjXDs/gpqDTDp8eNF/9oQwAF8mV8g2L8TTD2QzWIgB277pO
 sjfvlNs6F5wWh2yawhFznMzXzCBr6k01TlzPHVlZfdgaasrbXW9iHPJIoWIo9R+R
 BAAAlbu7t4lrwOc9DKd6NfP3VpblqvoQuTo9mhhQvVRXYf1vxaKK1HMaFygibiaO
 qnkYXt/Ofk5lsRgTVvFbKiAPmJ1WmInwwwzDiycA2tvXbJSxi8lsYzuQ+Me7diqY
 rvd2OxKQEG0XqpQKUG104i4NDJxXV+xRMh7wgENa02cylcrpjs48BokGSybGfw7D
 C/DcONQfghwGhsqiPXsoYPke/yFH/DMq3UyCBpy4c2W4LzFoDiUah1G2eB3s9DB9
 tobc7yuCcCiM/kGX3T1teqy83T4ssHogaVwbYyhFSNq7mwspDyVDYB8XKnH+E3k0
 znws1MOpiRQE49u9iJ4CW8FU67lI90+5C/SMoVqLFx/hVl6iDe4u2PmnSMLdFm3v
 GxIcTezItHsqYIPxmHti
 =PwkY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20170717-pull-request' into staging

virtio-gpu migration fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:41:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20170717-pull-request:
  virtio-gpu: skip update cursor in post_load if we don't have one

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17 17:12:41 +01:00
Gerd Hoffmann
10750ee0d6 virtio-gpu: skip update cursor in post_load if we don't have one
If the cursor resource id isn't set the guest didn't define a cursor.
Skip the cursor update in post_load in that that case.

Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: wanghaibin <wanghaibin.wang@huawei.com>
Message-id: 20170710070432.856-1-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-17 11:41:23 +02:00
Peter Maydell
ce66d778cd hw/display/qxl.c Use memory_region_init_ram()
Switch to memory_region_init_ram(), since we pass the same DeviceState
to both memory_region_init_ram_nomigrate() and vmstate_register_ram().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-11-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Peter Maydell
98a99ce084 hw: Use new memory_region_init_{ram, rom, rom_device}() functions
Use the new functions memory_region_init_{ram,rom,rom_device}()
instead of manually calling the _nomigrate() version and then
vmstate_register_ram_global().

Patch automatically created using coccinelle script:
 spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw

(As it turns out, there are no instances of the rom and
rom_device functions that are caught by this script.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Peter Maydell
1cfe48c1ce memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Igor Mammedov
8f5d58ef2c qom: enforce readonly nature of link's check callback
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:42 +02:00
Stefano Stabellini
9f2130f58d xenfb: remove xen_init_display "temporary" hack
Initialize xenfb properly, as all other backends, from its own
"initialise" function.

Remove the dependency of vkbd on vfb: use qemu_console_lookup_by_index
to find the principal console (to get the size of the screen) instead of
relying on a vfb backend to be available (which adds a dependency
between the two).

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
2017-07-07 11:10:03 -07:00
Edgar E. Iglesias
31cf950ea2 xilinx-dp: Add support for the yuy2 video format
Add support for the yuy2 video format.

Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Acked-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-07-04 09:22:20 +02:00
Halil Pasic
d2164ad35c vmstate: error hint for failed equal checks
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.

Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28 11:18:44 +02:00
Marc-André Lureau
f664b88247 Remove/replace sysemu/char.h inclusion
Those are apparently unnecessary includes.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Juan Quintela
795c40b8bd migration: Create migration/blocker.h
This allows us to remove lots of includes of migration/migration.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17 12:04:59 +02:00
Stefan Hajnoczi
384d9d554a ui: add egl-headless
ui: some vnc cleanups
 ui: absolute events for input-linux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZFaFvAAoJEEy22O7T6HE4TqgP/1bwf3/W6Xmg51A93URWK4uq
 RWGc9nCtIPh+CieqUByHGwDdV88p/6UBuLsXosHG3DM4olRgynAUOjTMBCe9Mq8Q
 nF2LSPW273Ir/H5bzrDP+3m6roxoMQQbSeXRuA5vQ8u4HpD+Y17T7NOeiwCLFg49
 96zSKlucIWHFkGHO4n6fwWR+sIVhsPXwOykFO7EScGav5Ir9SuFJDUx+JeBQ7wot
 eOKiYEKaJKKnjFHFUYQnyUq+6cZBbuR9B3FRHaCNTxGuWjCXxPO8O1Pz4B2oIZH9
 +pcvg+2f12Zw+dm0pMZHO5sH5hkIY7xzRMkFH0ifpscmGNuJT6oJ9xA4x+sJkAiX
 FrcunzAH939LtcgNloZq07PXhA8O+LqHiTKIPr1ZXomnW3jSmfuNvW1TwADJsL2E
 1Pnateibdiz7Xyb4b7hcvgYvjXA3iKbMgfpvu4n7x2P5orHaylmadXFfBjiOJ+u+
 z5n1ip3v417javuIAKwYepvHYjvkbcMPtUrkKwja6F+C3jvTH6wc+wMRrKPQxnOJ
 ZTPrlcEJOqSCYdzxI/fqg8B/HSDr1bcMX+odrCeJWC2O8deAld1aVXaFXz+JW483
 zi2vIBh+kHh6VHDtJynv7Sv7mUCY7jWEiBY6AidnMLR6zomKtwrn7wWqxBbCvI5g
 IVWjoRqul6sTNl3ywMhc
 =FimK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-ui-20170512-1' into staging

ui: add egl-headless
ui: some vnc cleanups
ui: absolute events for input-linux

# gpg: Signature made Fri 12 May 2017 12:50:07 PM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-ui-20170512-1:
  vnc: replace hweight_long() with ctpopl()
  vnc: simple clean up
  opengl: add egl-headless display
  egl: explicitly ask for core context
  egl-helpers: add missing error check
  egl-helpers: fix display init for x11
  egl-helpers: drop support for gles and debug logging
  virtio-gpu: move virtio_gpu_gl_block
  ui: input-linux: Add absolute event support
  ui: Support non-zero minimum values for absolute input axes

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15 14:26:47 +01:00
Stefan Hajnoczi
43ad494c04 make display updates thread safe, batch #2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZFHgvAAoJEEy22O7T6HE4744P/jzTCZRV40/lQ//NVKW05HGN
 OlrvTt3gLG20TAgZqNR4jgocrTi0fBkvCnret1Q1rwgp2dBRZ1mTmxpxVH9HJL7A
 kHvSNmOT2qfpxQGKxe+ZucLOWvLsJAL9SjzdHJ7A5+09KfKBtLNL93avYqw5erPt
 la6Nf9j6Dhi/OCD6AU+aTyBWEn1awrhNrRGMO9Z+pzF2VaVQ5V5lejGU1jvWmXiE
 Tq+xCa/oOe/tmLYsZw9CiWM44WMMC5fOTksY/wGs53HMayAkoFHJoba4MMyArmOv
 xFw/iR2IesjJXRfTda8cdp+GbqZTBZYgdaABl3trMl4TR36CrNxcXehGsU+eiCOG
 pdJ6QOTNJ/QJ3fWssC9X5tT+DbqjFc934ewXAHbVIDQ63dac3AaazeOeEzD8CF6R
 TzWd/nS79GRwo67HOeJTTGeQCGWBe/Ca8MUd2HItQyUUDIe1dllXf2cUHd5Ml9Pf
 4SoH7EEaKC9ZXfpN50duOaSI3UflcyAN2EWXeV5XxtwPPdvXXEm3LO/Uzjh5QgYH
 +V5FFsNmGnEn/vMp4nfuCiuZhScIH3BOVXFGAHuxuXnVw0F1cy9GLKpLKHxfQuZC
 gC03p0GcMkmyPmoXIiNc8ASyXBar6tMdz0PjRfKi2r4UTp1ZTjzM9EaF29KE2AXT
 WsEHAb++2mfb8gNH6J7Y
 =78eq
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-vga-20170511-1' into staging

make display updates thread safe, batch #2

# gpg: Signature made Thu 11 May 2017 03:41:51 PM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-vga-20170511-1:
  vga: fix display update region calculation
  sm501: make display updates thread safe
  tcx: make display updates thread safe
  cg3: make display updates thread safe

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15 14:07:07 +01:00
Gerd Hoffmann
c19f4fbce1 virtio-gpu: move virtio_gpu_gl_block
Move to virtio-gpu-3d.c where all the other virgl code lives too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170505104101.30589-2-kraxel@redhat.com
2017-05-12 12:02:48 +02:00
Gerd Hoffmann
bfc56535f7 vga: fix display update region calculation
vga display update mis-calculated the region for the dirty bitmap
snapshot in case the scanlines are padded.  This can triggere an
assert in cpu_physical_memory_snapshot_get_dirty().

Fixes: fec5e8c92b
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170509104839.19415-1-kraxel@redhat.com
2017-05-11 09:50:32 +02:00
Gerd Hoffmann
ca7f544123 sm501: make display updates thread safe
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170509111928.30935-1-kraxel@redhat.com
2017-05-11 09:50:29 +02:00
Mark Cave-Ayland
2dd285b5f3 tcx: make display updates thread safe
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1494449551-20227-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-11 09:49:27 +02:00
Mark Cave-Ayland
344a68bf9d cg3: make display updates thread safe
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1494449551-20227-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-11 09:49:27 +02:00
Stefan Hajnoczi
f465706e59 trivial patches for 2017-05-10
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAlkSvwIPHG1qdEB0bHMu
 bXNrLnJ1AAoJEHAbT2saaT5Zys4IAMZLWicv1c7O3m1ajmmg7iGfRbsajcx9FSBi
 NxdrqG3zgV10gz8/R7goMYGkeFs8MAoDfagbBkXgwFgA31M+ecOe93XyoOQLpe9/
 43fx2u8exVdruIb60F5yDEd51RLwK2C4Iz7SVNRoVWMqDcMOCuC+WBog+AbTB0V+
 19RjhKStMyXMXPYVO0bLhQIcH+ixFLUljbpwDvz5FKor5NqGG+FzHjmwYciiTbr3
 o7Z3OIMWT7rDr9V5/553miiNP9ufG3fJreMyXDrTkFRVmDZaqRBp+tvdrYcb77ed
 /DDxC5vafgCRzwsrmCIsIQXV0janFGDQiqbR+hzBMBG1RTRoBiM=
 =AAfU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2017-05-10

# gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* mjt/tags/trivial-patches-fetch: (23 commits)
  tests: Remove redundant assignment
  MAINTAINERS: Update paths for AioContext implementation
  MAINTAINERS: Update paths for main loop
  jazz_led: fix bad snprintf
  tests: Ignore another built executable (test-hmp)
  scripts: Switch to more portable Perl shebang
  scripts/qemu-binfmt-conf.sh: Fix shell portability issue
  virtfs: allow a device id to be specified in the -virtfs option
  hw/core/generic-loader: Fix crash when running without CPU
  virtio-blk: Remove useless condition around g_free()
  qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip
  use _Static_assert in QEMU_BUILD_BUG_ON
  channel-file: fix wrong parameter comments
  block: Make 'replication_state' an enum
  util: Use g_malloc/g_free in envlist.c
  qga: fix compiler warnings (clang 5)
  device_tree: fix compiler warnings (clang 5)
  usb-ccid: make ccid_write_data_block() cope with null buffers
  tests: Ignore more test executables
  Add 'none' as type for drive's if option
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-10 12:31:19 -04:00
Paolo Bonzini
e9c6ab62c7 jazz_led: fix bad snprintf
Detected by GCC 7's -Wformat-truncation.  snprintf writes at most
2 bytes here including the terminating NUL, so the result is
truncated.  In addition, the newline at the end is pointless.
Fix the buffer size and the format string.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-10 10:19:24 +03:00
Mark Cave-Ayland
8eb57ae3f9 cg3: add explicit ram_addr_t cast to scanline page variable
Coverity warns that multiplying two 32-bit values gives a 32-bit result which
is assigned to a 64-bit variable. Add an explicit ram_addr_t cast to silence
the warning.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-05 09:49:00 +01:00
Mark Cave-Ayland
b290f3b12e tcx: fix cut/paste error in update_palette_entries()
Commit ee72bed0 "tcx: remove primitives for non-32-bit surfaces" accidentally
left a trailing break in update_palette_entries() causing the palette update
routine to exit after just one iteration. Remove it.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-05-05 09:48:32 +01:00
Peter Maydell
eab1e53cac fix display update races, part one.
add xres + yres properties to qxl and virtio.
 misc fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJY/ew5AAoJEEy22O7T6HE4sXIP/2UxIRxgqIG/Gj+WWp4hHI7L
 9IharsFTO2OvZmwko+FdX8EKTJrDUNkCclei8FpYXmL3xnSALwYSokEjJV5wJ9r3
 Owf+ymWgwLfr6k/pnHb4F6iBQk82m052ZXJB4nsAJV1RbCA2cEnyuF7IVA/uPZf7
 HCjkXwJcg53XyVy7OzDilgZkNxFeioc4I32pjTBtWKmqsFqZqsLMJMZ5pD3ubpRz
 7wfwBFvH910TjB7YVPfZN0l8b2X6dUiK1b+pQCqvogoDLhItxG6aN3J3sjDbOoSP
 6Bwm815oPWziVWXHvPEoMhdorGhkoGpJXBdkSTeiW/CCdl6zF1EUJZc6yDWh+2SS
 ZKjV/aY0qPOxNMlaN4gf2scKVbn8nrsB/NnH53uczAUaelfn1v8S0aRr01i0z43v
 TWu87OszG14cQNssVjI8v80G+29Dr2bw0tFN2JAjVB7ZrNWCOkOgelxFEOBPK4EU
 eBeH1fUN0/QrTvRi2JS9b4GOW94LyY20AQPvQo7aqV9PVY+5qbiVi6BSavwdhjbR
 IAh8A60xIOTm3gyM2riKi5/0YBpyUFB6dnTVn5fLwipD9pjpdT/jQyn4Kl7ZSq7T
 q8gDJ99A/zKfte0y/JyL+iJ0JPNhzQwviTpemupDa9hbrHEkpIy7LKE74JXVicEO
 zBzIa3b+I9iogSLf3V5v
 =1F5z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170424-1' into staging

fix display update races, part one.
add xres + yres properties to qxl and virtio.
misc fixes and cleanups.

# gpg: Signature made Mon 24 Apr 2017 13:14:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vga-20170424-1:
  virtio-gpu: add xres and yres properties
  qxl: add xres and yres properties
  vmsvga: fix vmsvga_update_display
  g364fb: make display updates thread safe
  exynos: make display updates thread safe
  framebuffer: make display updates thread safe
  vga: make display updates thread safe.
  vga: add vga_scanline_invalidated helper
  memory: add support getting and using a dirty bitmap copy.
  bitmap: add bitmap_copy_and_clear_atomic
  virtio-gpu: replace PIXMAN_* by PIXMAN_BE_*
  console: add same displaychangelistener registration pre-condition
  console: add same surface replace pre-condition

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 15:37:30 +01:00
BALATON Zoltan
2edd6e4ac5 sm501: Add vmstate descriptor
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 86803c6f40cd678b61b3b1a1429683f60f0aa89a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
b612a49db2 sm501: Add some more missing registers
This is to allow clients to initialise these without failing as long
as no 2D engine function is called that would use the written value.
Saved values are not used yet (may get used when more of 2D engine is
added sometimes) and clients normally only write to most of these
registers, nothing is known to ever read them but they are documented
as read/write so also implement read for these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
1ae5e6eb42 sm501: Add support for panel layer
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 2029a276362c0c3a14c78acb56baa9466848dd51.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
01d2d584c9 sm501: Misc clean ups
- Rename a variable
- Move variable declarations out of loop to the beginning in draw_hwc_line

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 187c9e4e09d9bc2967b2454b36bb088ceef0b8bc.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
6a2a5aae02 sm501: Fix hardware cursor
Rework HWC handling to simplify it and fix cursor not updating on
screen as needed. Previously cursor was not updated because checking
for changes in a line overrode the update flag set for the cursor but
fixing this is not enough because the cursor should also be updated if
its shape or location changes. Introduce hwc_invalidate() function to
handle that similar to other display controller models.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
afef2e1d53 sm501: Fix device endianness
We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.

Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
efae27848d sm501: Add emulation of chip connected via PCI
Only the display controller part is created automatically on PCI

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
c795fa8447 sm501: Get rid of base address in draw_hwc_line
Do not use the base address to access data in local memory. This is in
preparation to allow chip connected via PCI where base address depends
on where the BAR is mapped so it will be unknown.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
ca8a110470 sm501: QOMify
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
70e46ca887 sm501: Add missing arbitration control register
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: d1eaf3b19c40aeb32a343a211f2b56664a67f948.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
e2ee84760e sm501: Use defined constants instead of literal values where available
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 31205c2df623e7b133ef942ff4f5e95fff800a14.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
64f1603b07 sm501: Fixed code style and a few typos in comments
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 36288b703e7d56822c818567193ff28cdc47377e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
Gerd Hoffmann
729abb6a92 virtio-gpu: add xres and yres properties
So the default resolution is configurable.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170421092214.8176-1-kraxel@redhat.com
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
6f663d7be9 qxl: add xres and yres properties
Add properties for the default display resolution, pass
on that information to the guest so the driver can use it.

Also move up qxl_crc32() function so we don't need a
forward declaration.

Additionally guest driver updates are needed so the
guest driver will actually pick this up, which will
probably land in linux kernel 4.12.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421092234.8368-1-kraxel@redhat.com
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
104bd1dc70 vmsvga: fix vmsvga_update_display
Fix standard vga mode check:  Both s->config and s->enabled must be set
to enable vmware command fifo processing.

Drop dirty tracking code from the fifo rendering code path, it isn't
used anyway because vmsvga turns off dirty tracking when leaving
standard vga mode.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-9-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
7fcf0c24e7 g364fb: make display updates thread safe
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-8-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
553bcce5ac exynos: make display updates thread safe
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-7-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
167e9c7982 framebuffer: make display updates thread safe
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-6-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
fec5e8c92b vga: make display updates thread safe.
The vga code clears the dirty bits *after* reading the framebuffer
memory.  So if the guest framebuffer updates hits the race window
between vga reading the framebuffer and vga clearing the dirty bits
vga will miss that update

Fix it by using the new memory_region_copy_and_clear_dirty()
memory_region_copy_get_dirty() functions.  That way we clear the
dirty bitmap before reading the framebuffer.  Any guest display
updates happening in parallel will be properly tracked in the
dirty bitmap then and the next display refresh will pick them up.

Problem triggers with mttcg only.  Before mttcg was merged tcg
never ran in parallel to vga emulation.  Using kvm will hide the
problem too, due to qemu operating on a userspace copy of the
kernel's dirty bitmap.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
f3289f6f0f vga: add vga_scanline_invalidated helper
Add vga_scanline_invalidated helper to check whenever a scanline was
invalidated.  Add a sanity check to fix OOB read access for display
heights larger than 2048.

Only cirrus uses this, for hardware cursor rendering, so having this
work properly for the first 2048 scanlines only shouldn't be a problem
as the cirrus can't handle large resolutions anyway.  Also changing the
invalidated_y_table size would break live migration.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-4-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Laurent Vivier
a27450ec04 virtio-gpu: replace PIXMAN_* by PIXMAN_BE_*
This avoids a "#ifdef HOST_WORDS_BIGENDIAN" and this is the purpose
of PIXMAN_BE_* macros.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com>
Message-id: 20170403114044.15762-1-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24 10:12:28 +02:00
Mark Cave-Ayland
7497638642 tcx: switch to load_image_mr() and remove prom_addr hack
Previous to the existence of load_image_mr(), the only way to load in the
FCode ROM image was to pass in its physical address via qdev properties
and use load_image_targphys().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
973945804d tcx: use tcx_set_dirty() for accelerated ops
Rather than calling memory_region_set_dirty() directly, make sure that we call
tcx_set_dirty() instead. This ensures that the 24-bit plane and cplane are
also invalidated correctly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
ee72bed08c tcx: remove primitives for non-32-bit surfaces
As all surfaces in QEMU are now either shared or 32-bit ARGB regardless of
the guest depth, remove all non-32-bit primitives from tcx_update_display()
and consequence their implementation which are no longer required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
d18e101225 tcx: remove TARGET_PAGE_SIZE from tcx24_update_display()
Now that page alignment is handled by the memory API, there is no need to
duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE).

Finally we have now removed all traces of TARGET_PAGE_SIZE.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
0a97c6c4f9 tcx: remove TARGET_PAGE_SIZE from tcx_update_display()
Now that page alignment is handled by the memory API, there is no need to
duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
66dcabea47 tcx: remove page24 and cpage from tcx24_update_display()
Since all of the tcx_*_dirty() functions now calculate the 24-bit and
cplane offsets themselves from the base address, these variables are no
longer needed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
36180430ac tcx: alter tcx24_reset_dirty() to accept address and length parameters
This can now be used by both the 8-bit and 24-bit display code, so rename
to tcx_check_dirty().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
427ee02bc9 tcx: alter tcx24_check_dirty() to accept address and length parameters
This can now be used by both the 8-bit and 24-bit display code, so rename
to tcx_check_dirty().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
4b865c2809 tcx: ensure tcx_set_dirty() also invalidates the 24-bit plane and cplane
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
9800b3c20e tcx: alter tcx_set_dirty() to accept address and length parameters
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 09:02:04 +01:00
Mark Cave-Ayland
8c95e1f20c cg3: switch to load_image_mr() and remove prom-addr hack
Previous to the existence of load_image_mr(), the only way to load in the
FCode ROM image was to pass in its physical address via qdev properties
and use load_image_targphys().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-21 09:01:49 +01:00
Mark Cave-Ayland
be4221d993 cg3: fix up size parameter for memory_region_get_dirty()
The code was incorrectly calculating the end address rather than the size of
the required region.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 08:31:30 +01:00
Mark Cave-Ayland
66e2f304a3 cg3: remove TARGET_PAGE_SIZE rounding on dirty page detection
This was an artifact from very early versions of the code from before the
memory API and is no longer needed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21 08:31:15 +01:00
Gerd Hoffmann
86dbcdd9c7 qxl: add migration blocker to avoid pre-save assert
Cc: 1635339@bugs.launchpad.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170410113131.2585-1-kraxel@redhat.com
2017-04-11 08:38:17 +02:00
Marc-André Lureau
a703d3aef5 qxl: switch display on entering VGA
Since commit cd958edb1f, same size console resize is skipped. This
change broke QXL incoming migration in VGA mode,
qemu_spice_display_switch() is no longer called during qxl_post_load(),
because default message surface is of the same size, and during
displaychangelistener registration, PCIQXLDevice.mode is
QXL_MODE_UNDEFINED. This triggers a later crash on refresh:

==2634== Invalid read of size 4
==3516== at 0x65F3050: pixman_image_get_data (in /usr/lib64/libpixman-1.so.0.34.0)
==3516== by 0x6F0CEB: qemu_spice_create_update (spice-display.c:215)
==3516== by 0x6F1CC7: qemu_spice_display_refresh (spice-display.c:502)
==3516== by 0x58CF77: display_refresh (qxl.c:1948)
==3516== by 0x6E8084: do_safe_dpy_refresh (console.c:1591)
==3516== by 0x6E80D5: dpy_refresh (console.c:1604)
==3516== by 0x6E4508: gui_update (console.c:201)
==3516== by 0x81898E: timerlist_run_timers (qemu-timer.c:536)
==3516== by 0x8189D6: qemu_clock_run_timers (qemu-timer.c:547)
==3516== by 0x818D98: qemu_clock_run_all_timers (qemu-timer.c:662)
==3516== by 0x81952A: main_loop_wait (main-loop.c:514)
==3516== by 0x4ADD29: main_loop (vl.c:1898)

One way to solve this is to explicitely call qemu_spice_display_switch()
on entering VGA mode, which is called during qxl_post_load().

Fixes:
"null pointer access on migration resume of systemrescuecd boot menu with qxl-vga"
https://bugs.launchpad.net/qemu/+bug/1679126
https://bugzilla.redhat.com/show_bug.cgi?id=1438566

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-07 12:31:46 +02:00
Gerd Hoffmann
db6cd4c855 cirrus: fix PUTPIXEL macro
Should be "c" not "col".  The macro is used with "col" as third parameter
everywhere, so this tyops doesn't break something.

Fixes: 026aeffcb4
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1490168303-24588-1-git-send-email-kraxel@redhat.com
2017-03-27 12:14:45 +02:00
Gerd Hoffmann
cc720a5dc4 add opengl_cflags to QEMU_CFLAGS
... and drop OPENGL_CFLAGS from Makefiles.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-21 10:25:01 +00:00
Peter Maydell
940a8ce075 fixes for 2.9-rc1, plus removal of -mno-cygwin references
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQExBAABCAAbBQJYz7wTFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
 AYwH/ip/ZIxsAEKMpQnGfwgHiLgGvFD+10wJECXLChyzcQLqqs4KingQEHMh6o9f
 Y1DTMyJBDk65k5zSEVx7nqisI82SUlvwOZJpVqCfF2AbY/HR+a+tUOp9njuz6EDh
 ZVSAnvIDfZC1P2BcXOPzEySXBNCZcZG0iHO9U4eobGAxRGVUs/8a8qHTuRVc2Mwg
 bT7lxLzE4chgQ1jFu2D7TzjwkFvAYeUHWdj2rl+U3KwEF9pUm0hAEfvymEP4d6hE
 hPqcE2X9W42n8wbxL7edI0EVZnc+bltfakioy+BxgrkxEZFLgMmKsUtNOuQ7sUdT
 VvQ3Zbw2solv6ltOqCbexLWueM4=
 =Vli2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

fixes for 2.9-rc1, plus removal of -mno-cygwin references

# gpg: Signature made Mon 20 Mar 2017 11:25:07 GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  hax: fix breakage in locking
  configure: remove Cygwin
  xen: do not build backends for targets that do not support xen
  qemu-ga: obey LISTEN_PID when using systemd socket activation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-20 16:34:26 +00:00
Stefano Stabellini
6b827cca9a xen: do not build backends for targets that do not support xen
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.

Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-19 11:12:12 +01:00
Gerd Hoffmann
f019722cbb cirrus: fix off-by-one in cirrus_bitblt_rop_bkwd_transp_*_16
The switch from pointers to addresses (commit
026aeffcb4 and
ffaf857778) added
a off-by-one bug to 16bit backward blits.  Fix.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 1489735296-19047-1-git-send-email-kraxel@redhat.com
2017-03-17 10:23:44 +01:00
Gerd Hoffmann
ffaf857778 cirrus: stop passing around src pointers in the blitter
Does basically the same as "cirrus: stop passing around dst pointers in
the blitter", just for the src pointer instead of the dst pointer.

For the src we have to care about cputovideo blits though and fetch the
data from s->cirrus_bltbuf instead of vga memory.  The cirrus_src*()
helper functions handle that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489584487-3489-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:16 +01:00
Gerd Hoffmann
026aeffcb4 cirrus: stop passing around dst pointers in the blitter
Instead pass around the address (aka offset into vga memory).  Calculate
the pointer in the rop_* functions, after applying the mask to the
address, to make sure the address stays within the valid range.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489574872-8679-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:15 +01:00
Gerd Hoffmann
e048dac616 cirrus: fix cirrus_invalidate_region
off_cur_end is exclusive, so off_cur_end == cirrus_addr_mask is valid.
Fix calculation to make sure to allow that, otherwise the assert added
by commit f153b563f8 can trigger for valid
blits.

Test case: boot windows nt 4.0

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489579606-26020-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:15 +01:00
Gerd Hoffmann
827bd51726 cirrus: add option to disable blitter
Ok, we have this beast in the cirrus code which is not used at all by
modern guests, except when you try to find security holes in qemu.  So,
add an option to disable blitter altogether.  Guests released within
the last ten years should not show any rendering issues if you turn off
blitter support.

There are no known bugs in the cirrus blitter code.  But in the past we
hoped a few times already that we've finally nailed the last issue.  So
having some easy way to mitigate in case yet another blitter issue shows
up certainly makes me sleep a bit better at night.

For completeness:  The by far better way to mitigate is to switch away
from cirrus and use stdvga instead.  Or something more modern like
virtio-vga in case your guest has support for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494540-15745-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:15 +01:00
Gerd Hoffmann
73c148130b cirrus: switch to 4 MB video memory by default
Quoting cirrus source code:
   Follow real hardware, cirrus card emulated has 4 MB video memory.
   Also accept 8 MB/16 MB for backward compatibility.

So just use 4MB by default.  We decided to leave that at 8MB by default
a while ago, for live migration compatibility reasons.  But we have
compat properties to handle that, so that isn't a compeling reason.

This also removes some sanity check inconsistencies in the cirrus code.
Some places check against the allocated video memory, some places check
against the 4MB physical hardware has.  Guest code can trigger asserts
because of that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494514-15606-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:15 +01:00
Gerd Hoffmann
50628d3479 cirrus/vnc: zap bitblit support from console code.
There is a special code path (dpy_gfx_copy) to allow graphic emulation
notify user interface code about bitblit operations carryed out by
guests.  It is supported by cirrus and vnc server.  The intended purpose
is to optimize display scrolls and just send over the scroll op instead
of a full display update.

This is rarely used these days though because modern guests simply don't
use the cirrus blitter any more.  Any linux guest using the cirrus drm
driver doesn't.  Any windows guest newer than winxp doesn't ship with a
cirrus driver any more and thus uses the cirrus as simple framebuffer.

So this code tends to bitrot and bugs can go unnoticed for a long time.
See for example commit "3e10c3e vnc: fix qemu crash because of SIGSEGV"
which fixes a bug lingering in the code for almost a year, added by
commit "c7628bf vnc: only alloc server surface with clients connected".

Also the vnc server will throttle the frame rate in case it figures the
network can't keep up (send buffers are full).  This doesn't work with
dpy_gfx_copy, for any copy operation sent to the vnc client we have to
send all outstanding updates beforehand, otherwise the vnc client might
run the client side blit on outdated data and thereby corrupt the
display.  So this dpy_gfx_copy "optimization" might even make things
worse on slow network links.

Lets kill it once for all.

Oh, and one more reason: Turns out (after writing the patch) we have a
security bug in that code path ...

Fixes: CVE-2016-9603
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494419-14340-1-git-send-email-kraxel@redhat.com
2017-03-16 08:58:15 +01:00
hangaohuai
215902d7b6 fix :cirrus_vga fix OOB read case qemu Segmentation fault
check the validity of parameters in cirrus_bitblt_rop_fwd_transp_xxx
and cirrus_bitblt_rop_fwd_xxx to avoid the OOB read which causes qemu Segmentation fault.

After the fix, we will touch the assert in
cirrus_invalidate_region:
assert(off_cur_end >= off_cur);

Signed-off-by: fangying <fangying1@huawei.com>
Signed-off-by: hangaohuai <hangaohuai@huawei.com>
Message-id: 20170314063919.16200-1-hangaohuai@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-03-16 08:58:15 +01:00
Gerd Hoffmann
dbb5fb8d35 qxl: clear guest_cursor on QXL_CURSOR_HIDE
Make sure we don't leave guest_cursor pointing into nowhere.  This might
lead to (rare) live migration failures, due to target trying to restore
the cursor from the stale pointer.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1421788
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1488789111-27340-1-git-send-email-kraxel@redhat.com
2017-03-09 09:47:26 +01:00
Peter Maydell
7d1730b7d9 trivial patches for 2017-02-28
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJYtRwrAAoJEHAbT2saaT5ZQSQIAKWIXrxhIGO6hGEDc50YL6x6
 tQMOnPQOulLtS76rGDAZrJwc47wqpXUtBCuevgwwqbxraLHF4LRnMf0I+xSR+lTt
 PF9vmgDgB4BVDpSTqphjaCBccXPYPqXzUtYaDcT6xePy8aB+/40nqsnby5hf+BXT
 zNpZZrn23papmftS3LnZ5j/lKNIsIlS/v5WIy8xNK0pBTKx4W1ZzDWrYq8crqW+v
 NqQSoVbNOEHOt1+C+nEX6gxUnY6rJXAVB0ICT0fSY9NRhFjPeu1Fx6EtCRNaluXm
 zOZ7t4kTjpB7IcHy3lqDTaWV6VVwBFUym5pfwjRLcge4ln+a5O454+/i8mxerfo=
 =jvkw
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2017-02-28

# gpg: Signature made Tue 28 Feb 2017 06:43:55 GMT
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch:
  syscall: fixed mincore(2) not failing with ENOMEM
  hw/acpi/tco.c: fix tco timer stop
  lm32: milkymist-tmu2: fix a third integer overflow
  qemu-options.hx: add missing id=chr0 chardev argument in vhost-user example
  Update copyright year
  tests/prom-env: Enable the test for the sun4u machine, too
  cadence_gem: Remove unused parameter debug message
  register: fix incorrect read mask
  ide: remove undefined behavior in ide-test
  CODING_STYLE: Mention preferred comment form
  hw/core/register: Mark the device with cannot_instantiate_with_device_add_yet
  hw/core/or-irq: Mark the device with cannot_instantiate_with_device_add_yet
  softfloat: Use correct type in float64_to_uint64_round_to_zero()
  target/s390x: Fix typo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 16:22:41 +00:00
Peter Maydell
3d74ee7dca lm32: milkymist-tmu2: fix a third integer overflow
Don't truncate the multiplication and do a 64 bit one instead
because the result is stored in a 64 bit variable.

This fixes a similar coverity warning to commits 237a8650d6 and
4382fa6554, in a similar way, and is the final third of the fix for
coverity CID 1167561 (hopefully!).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-28 09:03:39 +03:00
Gerd Hoffmann
975896fc88 virtio-gpu: use dpy_gl_scanout_disable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-4-git-send-email-kraxel@redhat.com
2017-02-27 16:15:29 +01:00
Gerd Hoffmann
f4c36bdab6 console: rename dpy_gl_scanout to dpy_gl_scanout_texture
We'll add a variant which accepts dmabufs soon.  Change
the name so we can easily disturgish the two variants.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
2017-02-27 16:15:28 +01:00
Gerd Hoffmann
92f2b88cea cirrus: add blit_is_unsafe call to cirrus_bitblt_cputovideo (CVE-2017-2620)
CIRRUS_BLTMODE_MEMSYSSRC blits do NOT check blit destination
and blit width, at all.  Oops.  Fix it.

Security impact: high.

The missing blit destination check allows to write to host memory.
Basically same as CVE-2014-8106 for the other blit variants.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-24 14:35:50 +01:00
Halil Pasic
59046ec29a migration: consolidate VMStateField.start
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.

The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.

Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13 17:27:13 +00:00
Gerd Hoffmann
12e97ec399 Revert "cirrus: allow zero source pitch in pattern fill rops"
This reverts commit 5858dd1801.

Conflicts:
	hw/display/cirrus_vga.c

Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-2-git-send-email-kraxel@redhat.com
2017-02-10 16:49:45 +01:00
Gerd Hoffmann
95280c31cd cirrus: fix patterncopy checks
The blit_region_is_unsafe checks don't work correctly for the
patterncopy source.  It's a fixed-sized region, which doesn't
depend on cirrus_blt_{width,height}.  So go do the check in
cirrus_bitblt_common_patterncopy instead, then tell blit_is_unsafe that
it doesn't need to verify the source.  Also handle the case where we
blit from cirrus_bitbuf correctly.

This patch replaces 5858dd1801.

Security impact:  I think for the most part error on the safe side this
time, refusing blits which should have been allowed.

Only exception is placing the blit source at the end of the video ram,
so cirrus_blt_srcaddr + 256 goes beyond the end of video memory.  But
even in that case I'm not fully sure this actually allows read access to
host memory.  To trick the commit 5858dd18 security checks one has to
pick very small cirrus_blt_{width,height} values, which in turn implies
only a fraction of the blit source will actually be used.

Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-1-git-send-email-kraxel@redhat.com
2017-02-10 16:49:45 +01:00
Gerd Hoffmann
ec87f206d7 cirrus: replace debug printf with trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486561893-26470-2-git-send-email-kraxel@redhat.com
2017-02-10 16:49:45 +01:00
Gerd Hoffmann
cf7dabeebc vga: replace debug printf with trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486561893-26470-1-git-send-email-kraxel@redhat.com
2017-02-10 16:49:45 +01:00
Gerd Hoffmann
5e8e3c4c75 virtio-gpu: fix resource leak in virgl_cmd_resource_unref
When the guest sends VIRTIO_GPU_CMD_RESOURCE_UNREF without detaching the
backing storage beforehand (VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING)
we'll leak memory.

This patch fixes it for 3d mode, simliar to the 2d mode fix in commit
"b8e2392 virtio-gpu: call cleanup mapping function in resource destroy".

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485167210-4757-1-git-send-email-kraxel@redhat.com
2017-02-10 16:49:45 +01:00
Li Qiang
dd248ed7e2 virtio-gpu: fix memory leak in set scanout
In virtio_gpu_set_scanout function, when creating the 'rect'
its refcount is set to 2, by pixman_image_create_bits and
qemu_create_displaysurface_pixman function. This can lead
a memory leak issues. This patch avoid this issue.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 5884626f.5b2f6b0a.1bfff.3037@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-10 16:49:45 +01:00
Peter Maydell
5b66d7ae89 cirrus: multiple bugfixes, including CVE-2017-2615 fix.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJYk0pHAAoJEEy22O7T6HE4jNEP/3wpFsWF+6nsLWKHJLweuEZh
 cuI/Nsr2b2Y53geug3GALcTujKAE0ZNiBvYqnf+7NB0Z6NRmAYMW7cYoPEbeQ9PN
 JvBMJahHpcqOeXjex05ZWrrMXHA0hHEXTfzcCyxV+45QlajLoJFDRBEp2vGQb71y
 UxKostXjH4YKzVVA5ApKlrl2HkpSqsyvqSRTknehRHguDtED/BIt5MSTuZYgc38A
 wvHMyF5CJO4K5TGl9KbYRl6fuUCZyPpsUh3+CBoPKid3V6D2JCW6E7hDrI3oUoEQ
 D+P4/Ugq+UagDlpg0vxWHk1P3eQM+SZfdsu7JOtP/OYbQV7h8Vg201yw5mZwru0f
 qyuv7Hio8eZfsxDLNJq8yO/bD1R76EYnO1ehtRljJcYfnk+wWnreysCSgRfFNj/M
 rZSXvjPkWy/4aDMF+6Vwbz/o3zt1791rVX1HSL9LCSXeHlPYZn0h8QTcE/6nJz97
 TDokZ0aLykoB37AhvL/tj4K/9Bv2RY/NAhj/5Q9VEv2O24fQz9J+EhrG9liBKfM8
 cORPJvbR8OIxttih8A1PCXcBiOfBJ1pEHrXHEHwM5O/YEAGJt5me9kPLdsBCqR3I
 Y1zi6aVTQyeKvIHa+Gq3KLlpJzAqJUiwuwfEvDeOg09ogM6m7g3+hruP16DJu+o3
 z9w3E9ZHUF0ayqvHjTtZ
 =HXaP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170202-2' into staging

cirrus: multiple bugfixes, including CVE-2017-2615 fix.

# gpg: Signature made Thu 02 Feb 2017 15:03:35 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vga-20170202-2:
  cirrus: fix oob access issue (CVE-2017-2615)
  cirrus: fix blit address mask handling
  cirrus: allow zero source pitch in pattern fill rops
  cirrus: handle negative pitch in cirrus_invalidate_region()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-03 09:52:51 +00:00
Peter Maydell
4e9f5244e1 -----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYkeZAAAoJEJykq7OBq3PI6oUH/3qlRvQrWmhWLR+XCtwU0gON
 HRApL57Of+B1YbqJzb8wzjLMLfzZQYLoT7kf3FDRON751Iwpv2Qyl6j79kbmOQwy
 txvtgUTtPZrOZ9HMk6M1VboiKrkM1t0I1QiRYy/af2f1gD3KTqIt8YN1ic3xatKD
 Fgmx+oD+6EkrNilthemvDyaXtGsdTl4GC9ZbGcJB2VJzzWkksRUfeZWysIu9p2zP
 l6viegW/1+o5wYgBt6DxMalfNGbEiuBgXgx6PVFPbkw0xNURC52qDHhQ91xTSWt1
 pvFrIhYWR/ETN0twJh+jtmCjkawKWSsx2nrLlrSh4H0EpwFoRfFqH/ZrOFSg0wg=
 =QnCX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Wed 01 Feb 2017 13:44:32 GMT
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: clean up trace-events files
  qapi: add missing trace_visit_type_enum() call
  trace: improve error reporting when parsing simpletrace header
  trace: update docs to reflect new code generation approach
  trace: switch to modular code generation for sub-directories
  trace: move setting of group name into Makefiles
  trace: move hw/i386/xen events to correct subdir
  trace: move hw/xen events to correct subdir
  trace: move hw/block/dataplane events to correct subdir
  make: move top level dir to end of include search path

# Conflicts:
#	Makefile

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-02 16:08:28 +00:00
Li Qiang
62d4c6bd52 cirrus: fix oob access issue (CVE-2017-2615)
When doing bitblt copy in backward mode, we should minus the
blt width first just like the adding in the forward mode. This
can avoid the oob access of the front of vga's vram.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>

{ kraxel: with backward blits (negative pitch) addr is the topmost
          address, so check it as-is against vram size ]

Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: d3532a0db0 (CVE-2014-8106)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485938101-26602-1-git-send-email-kraxel@redhat.com
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2017-02-02 15:58:23 +01:00
Gerd Hoffmann
60cd23e851 cirrus: fix blit address mask handling
Apply the cirrus_addr_mask to cirrus_blt_dstaddr and cirrus_blt_srcaddr
right after assigning them, in cirrus_bitblt_start(), instead of having
this all over the place in the cirrus code, and missing a few places.

Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485338996-17095-1-git-send-email-kraxel@redhat.com
2017-02-01 09:47:22 +01:00
Wolfgang Bumiller
5858dd1801 cirrus: allow zero source pitch in pattern fill rops
The rops used by cirrus_bitblt_common_patterncopy only use
the destination pitch, so the source pitch shoul allowed to
be zero and the blit with used for the range check around the
source address.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485272138-23249-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-01 09:43:09 +01:00