Pages can't be both write and executable at the same time on Apple
Silicon. macOS provides public API to switch write protection [1] for
JIT applications, like TCG.
1. https://developer.apple.com/documentation/apple_silicon/porting_just-in-time_compilers_to_apple_silicon
Tested-by: Alexander Graf <agraf@csgraf.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210113032806.18220-1-r.bolshakov@yadro.com>
[rth: Inline the qemu_thread_jit_* functions;
drop the MAP_JIT change for a follow-on patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve rotrv_vec to reduce "t1 = -v2, t2 = t1 + c" to
"t1 = -v2, t2 = c - v2". This avoids a serial dependency
between t1 and t2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Improve expand_vec_shi to use sign-extraction for MO_32.
This allows a single VSPLTISB instruction to load all of
the valid shift constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These interfaces have been replaced by tcg_gen_dupi_vec
and tcg_constant_vec.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several ways we can expand a vector dup of a 64-bit
element on a 32-bit host.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The normal movi opcodes are going away. We need something
for TCI to use internally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we now store uint64_t in TCGTemp, we can now always
store the full 64-bit duplicate immediate. So remove the
difference between 32- and 64-bit hosts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allocate a large block for indexing. Instead, allocate
for each temporary as they are seen.
In general, this will use less memory, if we consider that most
TBs do not touch every target register. This also allows us to
allocate TempOptInfo for new temps created during optimization.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will hold a single constant for the duration of the TB.
They are hashed, so that each value has one temp across the TB.
Not used yet, this is all infrastructure.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This propagates the extended value of TCGTemp.val that we did before.
In addition, it will be required for vector constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix this name vs our coding style.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will reduce the differences between 32-bit and 64-bit hosts,
allowing full 64-bit constants to be created with the same interface.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In most, but not all, places that we check for TEMP_FIXED,
we are really testing that we do not modify the temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The temp_fixed, temp_global, temp_local bits are all related.
Combine them into a single enumeration.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we don't store more than tcg_target_long in TCGTemp,
we shouldn't be limited to that for code generation. We will
be able to use this for INDEX_op_dup2_vec with 2 constants.
Also pass along the minimal vece that may be said to apply
to the constant. This allows some simplification in the
various backends.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having dupi pass though movi is confusing and arguably wrong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx, remove the define.
Replace the one use with a test for CONFIG_TCG_INTERPRETER.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This target was not updated with 7ecd02a06f, and so did
not allow re-compilation with relocation overflow.
Remove reloc_26 and reloc_26_val as unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 7ecd02a06f, we are prepared to re-start code generation
with a smaller TB if a relocation is out of range. We no longer
need to leave a nop in the stream Just In Case.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The offset even checks were folded into the range check incorrectly.
By offsetting by 1, and not decrementing the width, we silently
allowed out of range branches.
Assert that the offset is always even instead. Move tcg_out_goto
down into the CONFIG_SOFTMMU block so that it is not unused.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_tbrel_diff when we need a displacement to a label,
and with a NULL argument when we need the normalizing addend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The maximum TB code gen size is UINT16_MAX, which the current
code does not support. Use our utility function to optimally
add an arbitrary constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_tbrel_diff when we need a displacement to a label,
and with a NULL argument when we need the normalizing addend.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo generated a branch-and-link insn instead of plain branch.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This produces a small pc-relative displacement within the
generated code to the TB structure that preceeds it.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Plumb the value through to alloc_code_gen_buffer. This is not
supported by any os or tcg backend, so for now enabling it will
result in an error.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass both rx and rw addresses to tb_target_set_jmp_target.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the arguments to always use s->code_ptr instead of
take it as an argument. That makes it easy to ensure that
the value_ptr is always the rx version.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change TCGLabel.u.value_ptr to const, and initialize it with
tcg_splitwx_to_rx. Propagate const through tcg/host/ only
as far as needed to avoid errors from the value_ptr change.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two helper functions, using a global variable to hold
the displacement. The displacement is currently always 0,
so no change in behaviour.
Begin using the functions in tcg common code only.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.
Use the correct function pointer type, and name the variable
tcg_qemu_tb_exec, which means that we are able to remove the
macro that does the casting.
Replace HAVE_TCG_QEMU_TB_EXEC with CONFIG_TCG_INTERPRETER,
as this is somewhat clearer in intent.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are shortly going to have a split rw/rx jit buffer. Depending
on the host, we need to flush the dcache at the rw data pointer and
flush the icache at the rx code pointer.
For now, the two passed pointers are identical, so there is no
effective change in behaviour.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is currently a no-op within tci/tcg-target.h, but
is about to be moved to a more generic location.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable this on i386 to restrict the set of input registers
for an 8-bit store, as required by the architecture. This
removes the last use of scratch registers for user-only mode.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always true when movbe is available, otherwise leave
this to generic code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Out-of-range shifts have undefined results, but must not trap.
Mask off immediate shift counts to solve this problem.
This bug can be reproduced by running the following guest instructions:
xor %ecx,%ecx
sar %cl,%eax
cmovne %edi,%eax
After optimization, the tcg opcodes of the sar are
movi_i32 tmp3,$0xffffffffffffffff pref=all
sar_i32 tmp3,eax,tmp3 dead: 2 pref=all
mov_i32 cc_dst,eax sync: 0 dead: 1 pref=0xffc0300
mov_i32 cc_src,tmp3 sync: 0 dead: 0 1 pref=all
movi_i32 cc_op,$0x31 sync: 0 dead: 0 pref=all
The sar_i32 opcode is a shift by -1, which unmasked generates
0x200808d618: fffa5b9b illegal
Signed-off-by: Zihao Yu <yuzihao@ict.ac.cn>
Message-Id: <20201216081206.9628-1-yuzihao@ict.ac.cn>
[rth: Reworded the patch description.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In f47db80cc0, we handled odd-sized tail clearing for
the case of hosts that have vector operations, but did
not handle the case of hosts that do not have vector ops.
This was ok until e2e7168a21, which changed the encoding
of simd_desc such that the odd sizes are impossible.
Add memset as a tcg helper, and use that for all out-of-line
byte stores to vectors. This includes, but is not limited to,
the tail clearing operation in question.
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/bugs/1907817
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c. This can cause
link errors when tcg is disabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LLVM/Clang, supports runtime checks for forward-edge Control-Flow
Integrity (CFI).
CFI on indirect function calls (cfi-icall) ensures that, in indirect
function calls, the function called is of the right signature for the
pointer type defined at compile time.
For this check to work, the code must always respect the function
signature when using function pointer, the function must be defined
at compile time, and be compiled with link-time optimization.
This rules out, for example, shared libraries that are dynamically loaded
(given that functions are not known at compile time), and code that is
dynamically generated at run-time.
This patch:
1) Introduces the CONFIG_CFI flag to support cfi in QEMU
2) Introduces a decorator to allow the definition of "sensitive"
functions, where a non-instrumented function may be called at runtime
through a pointer. The decorator will take care of disabling cfi-icall
checks on such functions, when cfi is enabled.
3) Marks functions currently in QEMU that exhibit such behavior,
in particular:
- The function in TCG that calls pre-compiled TBs
- The function in TCI that interprets instructions
- Functions in the plugin infrastructures that jump to callbacks
- Functions in util that directly call a signal handler
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be able to compile this file with -Werror=implicit-fallthrough,
we need to add some fallthrough annotations to the case statements
that might fall through. Unfortunately, the typical "/* fallthrough */"
comments do not work here as expected since some case labels are
wrapped in macros and the compiler fails to match the comments in
this case. But using __attribute__((fallthrough)) seems to work fine,
so let's use that instead (by introducing a new QEMU_FALLTHROUGH
macro in our compiler.h header file).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201211152426.350966-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit cd0372c515.
The patch is incorrect in that it retains copies between globals and
non-local temps, and non-local temps still die at the end of the BB.
Failing test case for hppa:
.globl _start
_start:
cmpiclr,= 0x24,%r19,%r0
cmpiclr,<> 0x2f,%r19,%r19
---- 00010057 0001005b
movi_i32 tmp0,$0x24
sub_i32 tmp1,tmp0,r19
mov_i32 tmp2,tmp0
mov_i32 tmp3,r19
movi_i32 tmp1,$0x0
---- 0001005b 0001005f
brcond_i32 tmp2,tmp3,eq,$L1
movi_i32 tmp0,$0x2f
sub_i32 tmp1,tmp0,r19
mov_i32 tmp2,tmp0
mov_i32 tmp3,r19
movi_i32 tmp1,$0x0
mov_i32 r19,tmp1
setcond_i32 psw_n,tmp2,tmp3,ne
set_label $L1
In this case, both copies of "mov_i32 tmp3,r19" are removed. The
second because opt thought it was redundant. The first is removed
later by liveness because tmp3 is known to be dead. This leaves
the setcond_i32 with an uninitialized input.
Revert the entire patch for 5.2, and a proper optimization across
the branch may be considered for the next development cycle.
Reported-by: qemu@igor2.repo.hu
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6e6c4efed9, there has been a more appropriate range check
done later at the end of tcg_gen_code. There, a failing range
check results in a returned error code, which causes the TB to
be restarted at half the size.
Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can easily propagate temp values through the entire extended
basic block (in this case, the set of blocks connected by fallthru),
simply by not discarding the register state at the branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can easily register allocate the entire extended basic block
(in this case, the set of blocks connected by fallthru), simply
by not discarding the register state at the branch.
This does not help blocks starting with a label, as they are
reached via a taken branch, and that would require saving the
complete register state at the branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmp_vec opcode is mandatory; this symbol is unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the two arguments are identical, this can be reduced to
dup_vec or to mov_vec from a tcg_constant_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The definition of INDEX_op_dupi_vec is that it operates on
units of tcg_target_ulong -- in this case 32 bits. It does
not work to use this for a uint64_t value that happens to be
small enough to fit in tcg_target_ulong.
Fixes: d2fd745fe8
Fixes: db432672dc
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change wrongly stated that 32-bit avx2 should have
used VPBROADCASTW. But that's a 16-bit broadcast and we want a
32-bit broadcast.
Fixes: 7b60ef3264
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are easier to set and test when they have their own fields.
Reduce the size of alias_index and sort_index to 4 bits, which is
sufficient for TCG_MAX_OP_ARGS. This leaves only the bits indicating
constants within the ct field.
Move all initialization to allocation time, rather than init
individual fields in process_op_defs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This uses an existing hole in the TCGArgConstraint structure
and will be convenient for keeping the data in one place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With larger vector sizes, it turns out oprsz == maxsz, and we only
need to represent mismatch for oprsz <= 32. We do, however, need
to represent larger oprsz and do so without reducing SIMD_DATA_BITS.
Reduce the size of the oprsz field and increase the maxsz field.
Steal the oprsz value of 24 to indicate equality with maxsz.
Tested-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
We already support duplication of 128-bit blocks. This extends
that support to 256-bit blocks. This will be needed by SVE2.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not store back to the exact memory from which we just loaded.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback inline expansion for vectorized absolute value,
when the host doesn't support such an insn was flawed.
E.g. when a vector of bytes has all elements negative, mask
will be 0xffff_ffff_ffff_ffff. Subtracting mask only adds 1
to the low element instead of all elements becase -mask is 1
and not 0x0101_0101_0101_0101.
Signed-off-by: Stephen Long <steplong@quicinc.com>
Message-Id: <20200813161818.190-1-steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
-----BEGIN PGP SIGNATURE-----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=L9Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging
ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group vmuluwm and vmulld. Make vmulld-specific
changes since it belongs to new ISA 3.1.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-3-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Forgetting this asserts when tcg_gen_cmp_vec is called from
within tcg_gen_cmpsel_vec.
Fixes: 72b4c792c7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1594600421-22942-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The smin/smax/umin/umax operations require the operands to be
properly sign extended. Do not drop the MO_SIGN bit from the
load, and additionally extend the val input.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reported-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200701165646.1901320-1-richard.henderson@linaro.org>
Sanitize shift constants so that shift operations with
large constants don't generate invalid instructions.
Signed-off-by: Catherine A. Frederick <chocola@animebitch.es>
Message-Id: <20200607211100.22858-1-agrecascino123@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the output of the move is dead, then the last use is in
the store. If we propagate the input to the store, then we
can remove the move opcode entirely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had support for rotlv, using a target-specific opcode;
convert to use the generic opcode. Handle rotrv via simple negation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For immediate rotate , we can implement this in two instructions,
using SLI. For variable rotate, the oddness of aarch64 right-shift-
as-negative-left-shift means a backend-specific expansion works best.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For immediates, we must continue the special casing of 8-bit
elements. The other element sizes and shift types are trivially
implemented with shifts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not reflect this expansion in tcg_can_emit_vecop_list,
so it is unused and unusable. However, we actually perform
the same expansion in do_gvec_shifts, so it is also unneeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will become useful shortly for providing more information about
output assembly inline. While there fix up the indenting and code
formatting in disas().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513175134.19619-9-alex.bennee@linaro.org>
For the benefit of compatibility of function pointer types,
we have standardized on int32_t and int64_t as the integral
argument to tcg expanders.
We converted most of them in 474b2e8f0f, but missed the rotates.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have this same parameter for GVecGen2i, GVecGen3,
and GVecGen3i. This will make some SVE2 insns easier
to parameterize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Better handling of non-power-of-2 tails as seen with Arm 8-byte
vector operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These interfaces are now unused.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the outgoing interface.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
OPC_SYNC_WMB, OPC_SYNC_MB, OPC_SYNC_ACQUIRE, OPC_SYNC_RELEASE and
OPC_SYNC_RMB have wrong encode. According to the mips manual,
their encode should be 'OPC_SYNC | 0x?? << 6' rather than
'OPC_SYNC | 0x?? << 5'. Wrong encode can lead illegal instruction
errors. These instructions often appear with multi-threaded
simulation.
Fixes: 6f0b99104a ("tcg/mips: Add support for fence")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: lixinyu <precinct@mail.ustc.edu.cn>
Message-Id: <20200411124612.12560-1-precinct@mail.ustc.edu.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When %gs cannot be used, we use register offset addressing.
This path is almost never used, so it was clearly not tested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200406174803.8192-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We were only constructing the 64-bit element, and not
replicating the 64-bit element across the rest of the vector.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A given RISU testcase for SVE can produce
tcg-op-vec.c:511: do_shifti: Assertion `i >= 0 && i < (8 << vece)' failed.
because expand_vec_sari gave a shift count of 32 to a MO_32
vector shift.
In 44f1441dbe, we changed from direct expansion of vector opcodes
to re-use of the tcg expanders. So while the comment correctly notes
that the hw will handle such a shift count, we now have to take our
own sanity checks into account. Which is easy in this particular case.
Fixes: 44f1441dbe
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is, after all, just two instructions.
Profiling on a cortex-a15, using -d nochain to increase the number
of exit_tb that are executed, shows a minor improvement of 0.5%.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We will shortly use this function from tcg_out_op as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While do_gen_mem_cb does copy (via extu_tl_i64) vaddr into a new temp
this won't help if the vaddr temp gets clobbered by the actual
load/store op. To avoid this clobbering we explicitly copy vaddr
before the op to ensure it is live my the time we do the
instrumentation.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Cc: qemu-stable@nongnu.org
Message-Id: <20200225124710.14152-18-alex.bennee@linaro.org>
Extend the vector generator infrastructure to handle
5 vector arguments.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-4-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All the *.inc.c files included by tcg/$TARGET/tcg-target.inc.c
are in tcg/, their parent directory. To simplify the preprocessor
search path, include the relative parent path: '..'.
Patch created mechanically by running:
$ for x in tcg-pool.inc.c tcg-ldst.inc.c; do \
sed -i "s,#include \"$x\",#include \"../$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This now allows changing the logfile while logging is active,
and also solves the issue of a seg fault while changing the logfile.
Any read access to the qemu_logfile handle will use
the rcu_read_lock()/unlock() around the use of the handle.
To fetch the handle we will use atomic_rcu_read().
We also in many cases do a check for validity of the
logfile handle before using it to deal with the case where the
file is closed and set to NULL.
The cases where we write to the qemu_logfile will use atomic_rcu_set().
Writers will also use call_rcu() with a newly added qemu_logfile_free
function for freeing/closing when readers have finished.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-6-robert.foley@linaro.org>
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a
handle to unlock. This allows for changing the handle during logging
and ensures the lock() and unlock() are for the same file.
Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock()
calls (and the log("\n")), since the translator can longjmp out of the
loop if it attempts to translate an instruction in an inaccessible page.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
Since 2008 the tcg/LICENSE file has not changed: it claims that
everything under tcg/ is BSD-licensed.
This is not true and hasn't been true for years: in 2013 we
accepted the tcg/aarch64 target code under a GPLv2-or-later
license statement. We also have generic vector optimisation
code under the LGPL2.1-or-later, and the TCI backend is
GPLv2-or-later. Further, many of the files are not BSD
licensed but MIT licensed.
We don't really consider the tcg subdirectory to be a distinct part
of QEMU anyway.
Remove the LICENSE file, since claiming false information
about the license of the code is confusing.
Update the main project LICENSE file also to be clearer about
the licenses used by TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-5-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for tcg/i386/tcg-target.opc.h.
This file has had only two commits, 4b06c21682 and
d9897efa1f, both by a Linaro engineer.
The license is MIT, since that's what the rest of tcg/ppc/ is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-4-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for tcg/i386/tcg-target.opc.h.
This file has had only one commit, 770c2fc7bb, by
a Linaro engineer.
The license is MIT, since that's what the rest of tcg/i386/ is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the copyright/license boilerplate for target/aarch64/tcg-target.opc.h.
This file has only had two commits: 14e4c1e235
and 79525dfd08, both by the same Linaro engineer.
The license is GPL-2-or-later, since that's what the
rest of tcg/aarch64 uses.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191025155848.17362-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
To capture all memory accesses we need hook into all the various
helper functions that are involved in memory operations as well as the
injected inline helper calls. A later commit will allow us to resolve
the actual guest HW addresses by replaying the lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: drop haddr handling, just deal in vaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We first inject empty instrumentation from translator_loop.
After translation, we go through the plugins to see what
they want to register for, filling in the empty instrumentation.
If if turns out that some instrumentation remains unused, we
remove it.
This approach supports the following features:
- Inlining TCG code for simple operations. Note that we do not
export TCG ops to plugins. Instead, we give them a C API to
insert inlined ops. So far we only support adding an immediate
to a u64, e.g. to count events.
- "Direct" callbacks. These are callbacks that do not go via
a helper. Instead, the helper is defined at run-time, so that
the plugin code is directly called from TCG. This makes direct
callbacks as efficient as possible; they are therefore used
for very frequent events, e.g. memory callbacks.
- Passing the host address to memory callbacks. Most of this
is implemented in a later patch though.
- Instrumentation of memory accesses performed from helpers.
See the corresponding comment, as well as a later patch.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: add alloc_tcg_plugin_context, use glib, rm hwaddr]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Will gain a user soon.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We document this in docs/devel/load-stores.rst so lets follow it. The
32 bit and 64 bit access functions have historically not included the
sign so we leave those as is. We also introduce some signed helpers
which are used for loading immediate values in the translator.
Fixes: 282dffc8
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191021150910.23216-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes "make check-tcg" on a Debian x86_64 host.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190410194838.10123-1-sw@weilnetz.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional on MSR.VEC for TX=1,
so we can consider these Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are a mix of those like LXSD that are
only conditional only on MSR.VEC and those like LXV that are
conditional on MSR.VEC for TX=1. Thus, in the end, we can
consider all of these as Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VEC and
are thus part of the Altivec instruction set, and not VSX.
This includes negation and compare not equal.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional on MSR.FP when TX=0 and
MSR.VEC when TX=1. Since we only care about the Altivec registers,
and force TX=1, we can consider these to be Altivec instructions.
Since Altivec is true for any use of vector types, we only need
test have_isa_2_07.
This includes moves to and from the integer registers.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VSX and
are thus part of the VSX instruction set, and not Altivec.
This includes double-word loads and stores.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These new instructions are conditional only on MSR.VEC and
are thus part of the Altivec instruction set, and not VSX.
This includes lots of double-word arithmetic and a few extra
logical operations.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VSX instruction set instructions include double-word loads and
stores, double-word load and splat, double-word permute, and bit
select. All of which require multiple operations in the Altivec
instruction set.
Because the VSX registers map %vsr32 to %vr0, and we have no current
intention or need to use vector registers outside %vr0-%vr19, force
on the {ax,bx,cx,tx} bits within the added VSX insns so that we don't
have to otherwise modify the VR[TABC] macros.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Now that we have implemented the required tcg operations,
we can enable detection of host vector support.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (PPC32)
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is only used for 32-bit hosts.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
For Altivec, this is always an expansion.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
For Altivec, this is done via vector shift by vector,
and loading the immediate into a register.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector saturated add/subtract using Altivec
instructions:
VADDSBS, VADDSHS, VADDSWS, VADDUBS, VADDUHS, VADDUWS, and
VSUBSBS, VSUBSHS, VSUBSWS, VSUBUBS, VSUBUHS, VSUBUWS.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector add/subtract using Altivec instructions:
VADDUBM, VADDUHM, VADDUWM, VSUBUBM, VSUBUHM, VSUBUWM.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for vector maximum/minimum using Altivec instructions
VMAXSB, VMAXSH, VMAXSW, VMAXUB, VMAXUH, VMAXUW, and
VMINSB, VMINSH, VMINSW, VMINUB, VMINUH, VMINUW.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add various bits and peaces related mostly to load and store
operations. In that context, logic, compare, and splat Altivec
instructions are used, and, therefore, the support for emitting
them is included in this patch too.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Introduce all of the flags required to enable tcg backend vector support,
and a runtime flag to indicate the host supports Altivec instructions.
For now, do not actually set have_isa_altivec to true, because we have not
yet added all of the code to actually generate all of the required insns.
However, we must define these flags in order to disable ifndefs that create
stub versions of the functions added here.
The change to tcg_out_movi works around a buglet in tcg.c wherein if we
do not define tcg_out_dupi_vec we get a declared but not defined Werror,
but if we only declare it we get a defined but not used Werror. We need
to this change to tcg_out_movi eventually anyway, so it's no biggie.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Previously we've been hard-coding knowledge that Power7 has ISEL, but
it was an optional instruction before that. Use the AT_HWCAP2 bit,
when present, to properly determine support.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical to have_isa_2_06, so replace it.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce an enum to hold base < 2.06 < 3.00. Use macros to
preserve the existing have_isa_2_06 and have_isa_3_00 predicates.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce macros VRT(), VRA(), VRB(), VRC() used for encoding
elements of Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Introduce macro VX4() used for encoding Altivec instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Altivec supports 32 128-bit vector registers, whose names are
by convention v0 through v31.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Afterwise is "wise after the fact", as in "hindsight".
Here we meant "afterwards" (as in "subsequently"). Fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
This patch fixes two problems:
(1) The inputs to the EXTR insn were reversed,
(2) The input constraints use rZ, which means that we need to use
the REG0 macro in order to supply XZR for a constant 0 input.
Fixes: 464c2969d5
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On a 64-bit host, discard any replications of the 32-bit
sign bit when performing the shift and merge.
Fixes: https://bugs.launchpad.net/bugs/1834496
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation can always be emitted, even if we need to
fall back to xor. Adjust the assertions to match.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 269bd5d8 "cpu: Move the softmmu tlb to CPUNegativeOffsetState'
broke the RISC-V host build as there are two variables that are used but
not defined.
This patch renames the undefined variables mask_off and table_off to the
existing (but unused) mask_ofs and table_ofs variables.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <79729cc88ca509e08b5c4aa0aa8a52847af70c0f.1561039316.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
There was nothing armv7 specific about the bic+cmp sequence, however
looking at the set of guests more closely shows that the 8-bit immediate
operand for the bic can only be satisfied with one guest in tree:
baseline m-profile -- 10-bit pages with aligned 4-byte memory ops.
Therefore it does not seem useful to keep this path.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the code generation for the tlb from e.g.
ldr ip, [r6, #-0x10]
ldr r2, [r6, #-0xc]
and ip, ip, r4, lsr #8
ldrd r0, r1, [r2, ip]!
ldr r2, [r2, #0x18]
to
ldrd r0, r1, [r6, #-0x10]
and r0, r0, r4, lsr #8
ldrd r2, r3, [r1, r0]!
ldr r1, [r1, #0x18]
for armv7 hosts. Rearranging the register allocation in
order to avoid overlap between the two ldrd pairs causes
the patch to be larger than it ordinarily would be.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have for some time had code within the tcg backends to
handle large positive offsets from env. This move makes
sure that need not happen. Indeed, we are able to assert
at build time that simple offsets suffice for all hosts.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all softmmu tlb data into this structure. Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This instruction raises #GP, aka SIGSEGV, if the effective address
is not aligned to 16-bytes.
We have assertions in tcg-op-gvec.c that the offset from ENV is
aligned, for vector types <= V128. But the offset itself does not
validate that the final pointer is aligned -- one must also remember
to use the QEMU_ALIGNED() attribute on the vector member within ENV.
PowerPC Altivec has vector load/store instructions that silently
discard the low 4 bits of the address, making alignment mistakes
difficult to discover. Aid that by making the most popular host
visibly signal the error.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The allows immediates to be used for ORR and BIC,
as well as the trivial inversions, ORC and AND.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use MOVI+ORR or MVNI+BIC in order to build some vector constants,
as opposed to dropping them to the constant pool. This includes
all 16-bit constants and a similar set of 32-bit constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several sub-classes of vector immediate, and only MOVI
can use them all. This will enable usage of MVNI and ORRI, which
use progressively fewer sub-classes.
This patch adds no new functionality, merely splits the function
and moves part of the logic into tcg_out_dupi_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The instruction set has 3 insns that perform the same operation,
only varying in which operand must overlap the destination. We
can represent the operation without overlap and choose based on
the operands seen.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using umin(a, b) == a as an expansion for TCG_COND_LEU is a
better alternative to (a - INT_MIN) <= (b - INT_MIN).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already had backend support for this feature. Expand the new
cmpsel opcode using vpblendb. The combination allows us to avoid
an extra NOT for some comparison codes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If INDEX_op_foo is always expanded by tcg_expand_vec_op, then
there may be no reasonable set of constraints to return from
tcg_target_op_def for that opcode.
Let TCG_TARGET_HAS_foo be specified as -1 in that case. Thus a
boolean test for TCG_TARGET_HAS_foo is true, but we will not
assert within process_op_defs when no constraints are specified.
Compare this with tcg_can_emit_vec_op, which already uses this
tri-state indication.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform a per-element conditional move. This combination operation is
easier to implement on some host vector units than plain cmp+bitsel.
Omit the usual gvec interface, as this is intended to be used by
target-specific gvec expansion call-backs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This operation performs d = (b & a) | (c & ~a), and is present
on a majority of host vector units. Include gvec expanders.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The paths through tcg_gen_dup_mem_vec and through MO_128 were
missing the check_size_align. The path through MO_128 was also
missing the expand_clr. This last was not visible because the
only user is ARM SVE, which would set oprsz == maxsz, and not
require the clear.
Fix by adding the check_size_align and using do_dup directly
instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VBROADCASTSD instruction only allows %ymm registers as destination.
Rather than forcing VEX.L and writing to the entire 256-bit register,
revert to using MOVDDUP with an %xmm register. This is sufficient for
an avx1 host since we do not support TCG_TYPE_V256 for that case.
Also fix the 32-bit avx2, which should have used VPBROADCASTW.
Fixes: 1e262b49b5
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow expansion either via shift by scalar or by replicating
the scalar for shift by vector.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use a private structure for do_gvec_shifts.
The gvec expanders perform a modulo on the shift count. If the target
requires alternate behaviour, then it cannot use the generic gvec
expanders anyway, and will have to have its own custom code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the backend to expand dup from memory directly, instead of
forcing the value into a temp first. This is especially important
if integer/vector register moves do not exist.
Note that officially tcg_out_dupm_vec is allowed to fail.
If it did, we could fix this up relatively easily:
VECE == 32/64:
Load the value into a vector register, then dup.
Both of these must work.
VECE == 8/16:
If the value happens to be at an offset such that an aligned
load would place the desired value in the least significant
end of the register, go ahead and load w/garbage in high bits.
Load the value w/INDEX_op_ld{8,16}_i32.
Attempt a move directly to vector reg, which may fail.
Store the value into the backing store for OTS.
Load the value into the vector reg w/TCG_TYPE_I32, which must work.
Duplicate from the vector reg into itself, which must work.
All of which is well and good, except that all supported
hosts can support dupm for all vece, so all of the failure
paths would be dead code and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LD1R instruction does all the work. Note that the only
useful addressing mode is a base register with no offset.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This case is similar to INDEX_op_mov_* in that we need to do
different things depending on the current location of the source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Added some commentary to the tcg_reg_alloc_* functions.
The i386 backend already has these functions, and the aarch64 backend
could easily split out one. Nothing is done with these functions yet,
but this will aid register allocation of INDEX_op_dup_vec in a later patch.
Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support direct moves between vector registers
and general registers. So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch merely changes the interface, aborting on all failures,
of which there are currently none.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a function that takes an additional condition parameter
over the standard backend interface. It already takes care of
eliding no-op moves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only fixed_reg is cpu_env, and it should not be modified
during any TB. Therefore code that tries to special-case moves
into a fixed_reg is dead. Remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will not necessarily restrict the size of the TB, since for v7
the majority of constant pool usage is for calls from the out-of-line
ldst code, which is already at the end of the TB. But this does
allow us to save one insn per reference on the off-chance.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no point in coding for a 2GB offset when the max TB size
is already limited to 64k. If we further restrict to 32k then we
can eliminate the extra ADDIS instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB. In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.
This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will let backends implement the double-word shift operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225154204.26751-1-david@redhat.com>
[rth: Add matching tcg_gen_extract2_i32.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
The last update to this file was 9 years ago. In the meantime,
4 of the 6 ideas have actually been completed. The lat two do
not actually make sense anymore.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to a cut/paste error in the original implementation, the unsigned
vector saturating arithmetic was erroneously being calculated as signed
vector saturating arithmetic.
Fixes: 8ffafbcec2 ("tcg/i386: Implement vector saturating arithmetic")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190207224258.426-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently, a jump to a label that is not defined anywhere will
be emitted not be relocated. This results in a jump to a random
jump target. With tcg debugging, print a diagnostic to the -d op
file and abort.
This could help debug or detect errors like
c2d9644e6d ("target/arm: Fix crash on conditional instruction in an IT block")
Reported-by: Roman Kapl <code@rkapl.cz>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disabled in all TCG backends for now.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The avx instruction set does not directly provide MO_64.
We can still implement 64-bit with comparison and vpblendvb.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We handle many of these during integer expansion, and the
rest of them during integer optimization.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the argument register only after we have verified that the
temporary is not already in that register. This case is likely
now that we are back propagating the preferred register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With these preferences, we can arrange for function call arguments to
be computed into the proper registers instead of requiring extra moves.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use this to notice the opcodes that exit the TB, which implies
that local temps are really dead and need not be synced.
Previously we so marked the true end of the TB, but that was
immediately overwritten by the la_bb_end invoked by any
TCG_OPF_BB_END opcode, like exit_tb.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No need for a "tcg_" prefix for a static function; we already
have another "la_" prefix for indicating liveness analysis.
Pass in nb_globals and nb_temps, as we will already have them
in registers for other loops within the parent function.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two blocks of the form
if (foo) {
stuff1;
goto bar;
} else {
baz:
stuff2;
}
which have unnecessary and confusing indentation.
Remove the else and unindent stuff2.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Try harder to honor the output_pref. When we're forced to allocate
a second register for the input, it does not need to use the input
constraint; that will be honored by the register we allocate for the
output and a move is already required.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate storage for, but do not yet fill in, per-opcode
preferences for the output operands. Pass it in to the
register allocation routines for output operands.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This new argument will aid register allocation by indicating how
the temporary will be used in future. If the preference cannot
be satisfied, fall back to the constraints of the current insn.
Short circuit the preference when it cannot be satisfied or if
it does not further constrain the operation.
With an eye toward optimizing function call sequences, optimize
for the preferred_reg set containing a single register.
For the moment, all users pass 0 for preference.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Delete trivially dead code that follows unconditional branches and
noreturn helpers. These can occur either via optimization or via
the structure of a target's translator following an exception.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Increment when adding branches, and decrement when removing them.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remember which helpers have been marked noreturn.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Previously, the low 4 bits were used for TCG_CALL_TYPE_MASK,
which was removed in 6a18ae2d29.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dd6e439ab81883974b8fd91f904f6de26ab5d697.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d023127967a0217d8d1eabdf5de6c0e8f8c228.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <7c47f00cb4a9a777120456e0704b4076a5d943ab.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <2e047a95c39c007c66cda024c095e29b0ac4c43e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1a0a7e8f3347764f212c5efa5c07c9be17efdec6.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c356657e627168d89cb5b012b7e21e4efbbe83f3.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <5665a57809e32b35775e8e98fdab898853af37b8.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d5d88ff29163788938368bbdbd18815d59cef6a0.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2afba46efefa9388cf3205fcedbb9a5fa411f.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <bd6a45c73a67b77ddaa2fe590a6bb8ee422b9683.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6ac4f4b0d5ea93cb0ee9a3b8b47ee9f7b3711494.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c740aca183675625bb9cf3ce7b9e8b9d431ca694.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d54dc56303fd1b0d7ed53869de2dbb59b111c7ca.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dba7315e4e20e879933f72d47ccf98f1cc612b8a.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6e43abaa64361d57b9bc9439820d0e7701f2d47e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <a135ee1a88cd7bd08993a519d4d654da27785254.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's unused since 75e8b9b7aa.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181209193749.12277-9-cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of hard coding 31 for the shift right use TCG_TARGET_REG_BITS - 1.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7dfbddf7014a595150aa79011ddb342c3cc17ec3.1544648105.git.alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For now, defined universally as true, since we previously required
backends to implement swapped memory operations. Future patches
may now remove that support where it is onerous.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Somehow we forgot these operations, once upon a time.
This will allow immediate stores to have their bswap
optimized away.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Based on the only current user, Sparc:
New code uses 2 constants that take 2 insns to load from constant pool,
plus 13. Old code used 6 constants that took 1 or 2 insns to create,
plus 21. The result is a new total of 17 vs an old total of 29.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Based on the only current user, Sparc:
New code uses 1 constant that takes 2 insns to create, plus 8.
Old code used 2 constants that took 2 insns to create, plus 9.
The result is a new total of 10 vs an old total of 13.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These values are constant between all qemu_ld/st invocations;
there is no need to figure this out each time. If we cannot
use a segment or an offset directly for guest_base, load the
value into a register in the prologue.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have an invariant that all TCG_TYPE_I32 values are
zero-extended, which means that we do not need to extend
them again during qemu_ld/st, either explicitly via a separate
tcg_out_ext32u or implicitly via P_ADDR32.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This preserves the invariant that all TCG_TYPE_I32 values are
zero-extended in the 64-bit host register.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This does require an extra two checks within the slow paths
to replace the assert that we're moving. Also add two checks
within existing functions that lacked any kind of assert for
out of range branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The reloc_pc{14,24}_val routines retain their asserts.
Use these directly within the slow paths.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This does require an extra two checks within the slow paths
to replace the assert that we're moving.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This does require an extra two checks within the slow paths
to replace the assert that we're moving.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will move the assert for success from within (subroutines of)
patch_reloc into the callers. It will also let new code do something
different when a relocation is out of range.
For the moment, all backends are trivially converted to return true.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are one use apiece for these. There is no longer a need for
preserving branch offset operands, as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are one use apiece for these. There is no longer a need for
preserving branch offset operands, as we no longer re-translate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For x86_64, this can remove a REX prefix resulting in smaller code
when manipulating globals of type i32, as we move them between backing
store via cpu_env, aka TCG_AREG0.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Partially reverts ab20bdc116. The 14-bit displacement that we
allowed to reach the constant pool is not always sufficient.
Retain the tb-relative addressing, as that is how most return
values from the tb are computed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both GCC v4.8 and Clang v3.4 (our minimum versions) support
__builtin_unreachable(), so we can remove the version check here now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tcg-op.h header was missing the usual guard against multiple
inclusion; add it.
(Spotted by lgtm.com's static analyzer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181108125256.30986-1-peter.maydell@linaro.org
GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we implemented per-vCPU TCG contexts, we forgot to also
distribute the tcg_time counter, which has remained as a global
accessed without any serialization, leading to potentially missed
counts.
Fix it by distributing the field over the TCG contexts, embedding
it into TCGProfile with a field called "cpu_exec_time", which is more
descriptive than "tcg_time". Add a function to query this value
directly, and for completeness, fill in the field in
tcg_profile_snapshot, even though its callers do not use it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-5-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This plugs two 4-byte holes in 64-bit.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically
allocate TCGOps", 2017-12-29).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181010144853.13005-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than test NOCHAIN before linking, do not emit the
goto_tb opcode at all. We already do this for goto_ptr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG backend uses LOWREGMASK to get the low 3 bits of register numbers.
This was defined as no-op for 32-bit x86, with the assumption that we have
eight registers anyway. This assumption is not true once we have xmm regs.
Since LOWREGMASK was a no-op, xmm register indidices were wrong in opcodes
and have overflown into other opcode fields, wreaking havoc.
To trigger these problems, you can try running the "movi d8, #0x0" AArch64
instruction on 32-bit x86. "vpxor %xmm0, %xmm0, %xmm0" should be generated,
but instead TCG generated "vpxor %xmm0, %xmm0, %xmm2".
Fixes: 770c2fc7bb ("Add vector operations")
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20180824131734.18557-1-rka@sysgo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we do not opimize away dup_vec, we must mark its output as changed.
Fixes: 170ba88f45
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180805233258.31892-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.
Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In AdvSIMD we can only do 32x32 integer multiples although SVE is
capable of larger 64 bit multiples. As a result we can end up
generating invalid opcodes. Fix this by only reprting we can emit
mul vector ops if the size is small enough.
Fixes a crash on:
sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin
When running on AArch64 hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org>
[rth: Removed the tcg_debug_assert -- there are plenty of other
cases that we do not diagnose within the insn encoding helpers.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Normally this is automatic in the size restrictions that are placed
on vector sizes coming from the implementation. However, for the
legitimate size tuple [oprsz=8, maxsz=32], we need to clear the final
24 bytes of the vector register. Without this check, do_dup selects
TCG_TYPE_V128 and clears only 16 bytes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180705191929.30773-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also, assert that we don't overflow any of two different offsets into
the TB. Both unwind and goto_tb both record a uint16_t for later use.
This fixes an arm-softmmu test case utilizing NEON in which there is
a TB generated that runs to 7800 opcodes, and compiles to 96k on an
x86_64 host. This overflows the 16-bit offset in which we record the
goto_tb reset offset. Because of that overflow, we install a jump
destination that goes to neverland. Boom.
With this reduced op count, the same TB compiles to about 48k for
aarch64, ppc64le, and x86_64 hosts, and neither assertion fires.
Cc: qemu-stable@nongnu.org
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby making it per-TCGContext. Once we remove tb_lock, this will
avoid an atomic increment every time a TB is invalidated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This paves the way for enabling scalable parallel generation of TCG code.
Instead of tracking TBs with a single binary search tree (BST), use a
BST for each TCG region, protecting it with a lock. This is as scalable
as it gets, since each TCG thread operates on a separate region.
The core of this change is the introduction of struct tcg_region_tree,
which contains a pointer to a GTree and an associated lock to serialize
accesses to it. We then allocate an array of tcg_region_tree's, adding
the appropriate padding to avoid false sharing based on
qemu_dcache_linesize.
Given a tc_ptr, we first find the corresponding region_tree. This
is done by special-casing the first and last regions first, since they
might be of size != region.size; otherwise we just divide the offset
by region.stride. I was worried about this division (several dozen
cycles of latency), but profiling shows that this is not a fast path.
Note that region.stride is not required to be a power of two; it
is only required to be a multiple of the host's page size.
Note that with this design we can also provide consistent snapshots
about all region trees at once; for instance, tcg_tb_foreach
acquires/releases all region_tree locks before/after iterating over them.
For this reason we now drop tb_lock in dump_exec_info().
As an alternative I considered implementing a concurrent BST, but this
can be tricky to get right, offers no consistent snapshots of the BST,
and performance and scalability-wise I don't think it could ever beat
having separate GTrees, given that our workload is insert-mostly (all
concurrent BST designs I've seen focus, understandably, on making
lookups fast, which comes at the expense of convoluted, non-wait-free
insertions/removals).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The assembler in most versions of Mac OS X is pretty old and does not
support the xgetbv instruction. To go around this problem, the raw
encoding of the instruction is used instead.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20180604215102.11002-1-programmingkidx@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uXY+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These operations are re-invented by several targets so far.
Several supported hosts have insns for these, so place the
expanders out-of-line for a future introduction of tcg opcodes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 6001f7729e we partially attempt to address the branch
displacement overflow caused by 15fa08f845.
However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case. This is still
much less than the maximum forward branch distance of 32764 bytes.
Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
DUP v26.16b, w21
which becomes TCG IR ops:
dup_vec v128,e8,tmp2,x21
st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c: c4 c1 7a 7e 86 e8 00 00 vmovq 0xe8(%r14), %xmm0
0x607c5694: 00
0x607c5695: c5 f9 60 c8 vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699: c5 f9 61 c9 vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d: c5 f9 70 c9 00 vpshufd $0, %xmm1, %xmm1
0x607c56a2: c4 c1 7a 7f 8e 40 0a 00 vmovdqu %xmm1, 0xa40(%r14)
0x607c56aa: 00
when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=0000320000003200:0000320000003200
when given an input of x21 == 0000000002803200
rather than the expected all-zeroes.
Pass the correct source register number to tcg_out_vex_modrm()
for these insns.
Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ppc64 uses a BC instruction to call the tcg_out_qemu_ld/st
slow path. BC instruction uses a relative address encoded
on 14 bits.
The slow path functions are added at the end of the generated
instructions buffer, in the reverse order of the callers.
So more we have slow path functions more the distance between
the caller (BC) and the function increases.
This patch changes the behavior to generate the functions in
the same order of the callers.
Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180429235840.16659-1-lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros.
Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr,
tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32.
Use inlines instead of macros where possible.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In db432672, we allow wide inputs for operations such as add.
However, in 212be173 and 3774030a we didn't do the same for
compare and multiply.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I found with qemu 2.11.x or newer that I would get an illegal instruction
error running some Intel binaries on my ARM chromebook. On investigation,
I found it was quitting on memory barriers.
qemu instruction:
mb $0x31
was translating as:
0x604050cc: 5bf07ff5 blpl #0x600250a8
After patch it gives:
0x604050cc: f57ff05b dmb ish
In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be
correct based on online docs, but due to some endian-related shenanigans it
had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory
barrier for ARMv6) also should be byte swapped (and this patch does so).
I have not checked for correctness of aarch64's barrier instruction.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MIPS TCG target makes the assumption that the offset from the
target env pointer to the tlb_table is less than about 64K. This
used to be true, but gradual addition of features to the Arm
target means that it's no longer true there. This results in
the build-time assertion failing:
In file included from /home/pm215/qemu/include/qemu/osdep.h:36:0,
from /home/pm215/qemu/tcg/tcg.c:28:
/home/pm215/qemu/tcg/mips/tcg-target.inc.c: In function ‘tcg_out_tlb_load’:
/home/pm215/qemu/include/qemu/compiler.h:90:36: error: static assertion failed: "not expecting: offsetof(CPUArchState, tlb_table[NB_MMU_MODES - 1][1]) > 0x7ff0 + 0x7fff"
#define QEMU_BUILD_BUG_MSG(x, msg) _Static_assert(!(x), msg)
^
/home/pm215/qemu/include/qemu/compiler.h:98:30: note: in expansion of macro ‘QEMU_BUILD_BUG_MSG’
#define QEMU_BUILD_BUG_ON(x) QEMU_BUILD_BUG_MSG(x, "not expecting: " #x)
^
/home/pm215/qemu/tcg/mips/tcg-target.inc.c:1236:9: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
QEMU_BUILD_BUG_ON(offsetof(CPUArchState,
^
/home/pm215/qemu/rules.mak:66: recipe for target 'tcg/tcg.o' failed
An ideal long term approach would be to rearrange the CPU state
so that the tlb_table was not so far along it, but this is tricky
because it would move it from the "not cleared on CPU reset" part
of the struct to the "cleared on CPU reset" part. As a simple fix
for the 2.12 release, make the MIPS TCG target handle an arbitrary
offset by emitting more add instructions. This will mean an extra
instruction in the fastpath for TCG loads and stores for the
affected guests (currently just aarch64-softmmu).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20180413142336.32163-1-peter.maydell@linaro.org
The parameters for tcg_gen_insn_start are target_ulong, which may be split
into two TCGArg parameters for storage in the opcode on 32-bit hosts.
Fixes the ARM target and its direct use of tcg_set_insn_param, which would
set the wrong argument in the 64-on-32 case.
Cc: qemu-stable@nongnu.org
Reported-by: alarson@ddci.com
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180410003558.2470-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Failure to do so results in the tcg optimizer sign-extending
any constant fold from 32-bits. This turns out to be visible
in the RISC-V testsuite using a host that emits these opcodes
(e.g. any non-x86_64).
Reported-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This unifies 5 copies of checks for supported vector size,
and in the process fixes a missing check in tcg_gen_gvec_2s.
This lead to an assertion failure for 64-bit vector multiply,
which is not available in the AVX instruction set.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unknown why -m32 was passing with gcc but not clang; it should have
failed for both. This would be used for tcg_gen_dup_i64_vec, and
visible with the right TB and an aarch64 guest.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert multiplication by power of two to left shift.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The x86 vector instruction set is extremely irregular. With newer
editions, Intel has filled in some of the blanks. However, we don't
get many 64-bit operations until SSE4.2, introduced in 2009.
The subsequent edition was for AVX1, introduced in 2011, which added
three-operand addressing, and adjusts how all instructions should be
encoded.
Given the relatively narrow 2 year window between possible to support
and desirable to support, and to vastly simplify code maintainence,
I am only planning to support AVX1 and later cpus.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trivial move and constant propagation. Some identity and constant
function folding, but nothing that requires knowledge of the size
of the vector element.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use dup to convert a non-constant scalar to a third vector.
Add addition, multiplication, and logical operations with an immediate.
Add addition, subtraction, multiplication, and logical operations with
a non-constant scalar. Allow for the front-end to build operations in
which the scalar operand comes first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No vector ops as yet. SSE only has direct support for 8- and 16-bit
saturation; handling 32- and 64-bit saturation is much more expensive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Opcodes are added for scalar and vector shifts, but considering the
varied semantics of these do not expose them to the front ends. Do
go ahead and provide them in case they are needed for backend expansion.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some functions use intN_t arguments, some use uintN_t, some just
used "unsigned". To aid putting function pointers in tables, we
need consistency.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be required for storing vector constants.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We recently relaxed the limit of the number of opcodes that can
appear in a TranslationBlock. In certain cases this has resulted
in relocation overflow.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code sequence we were generating was only good for unsigned
comparisons. For signed comparisions, use the sequence from gcc.
Fixes booting of ppc64 firmware, with a patch changing the code
sequence for ppc comparisons.
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already handle this in the backends, and the lifetime datum
for the TCGOp is already large enough.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had two fields specific to INDEX_op_call. Rename these and
add some macros so that the fields may be reused for other opcodes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With no fixed array allocation, we can't overflow a buffer.
This will be important as optimizations related to host vectors
may expand the number of ops used.
Use QTAILQ to link the ops together.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now trivial sets and tests against NULL. Unwrap.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than have separate code only used for guest_base,
rely on a recent change to handle constant pool entries.
Cc: qemu-s390x@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Both ARMv6 and AArch64 currently may drop complex guest_base values
into the constant pool. But generic code wasn't expecting that, and
the pool is not emitted. Correct that.
Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is identical for each target. So, move the initialization to
common code. Move the variable itself out of tcg_ctx and name it
cpu_env to minimize changes within targets.
This also means we can remove tcg_global_reg_new_{ptr,i32,i64},
since there are no longer global-register temps created by targets.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This enables parallel TCG code generation. However, we do not take
advantage of it yet since tb_lock is still held during tb_gen_code.
In user-mode we use a single TCG context; see the documentation
added to tcg_region_init for the rationale.
Note that targets do not need any conversion: targets initialize a
TCGContext (e.g. defining TCG globals), and after this initialization
has finished, the context is cloned by the vCPU threads, each of
them keeping a separate copy.
TCG threads claim one entry in tcg_ctxs[] by atomically increasing
n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's
of that variable and tcg_ctxs; they are there just to play nice with
analysis tools such as thread sanitizer.
Note that we do not allocate an array of contexts (we allocate
an array of pointers instead) because when tcg_context_init
is called, we do not know yet how many contexts we'll use since
the bool behind qemu_tcg_mttcg_enabled() isn't set yet.
Previous patches folded some TCG globals into TCGContext. The non-const
globals remaining are only set at init time, i.e. before the TCG
threads are spawned. Here is a list of these set-at-init-time globals
under tcg/:
Only written by tcg_context_init:
- indirect_reg_alloc_order
- tcg_op_defs
Only written by tcg_target_init (called from tcg_context_init):
- tcg_target_available_regs
- tcg_target_call_clobber_regs
- arm: arm_arch, use_idiv_instructions
- i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt,
have_movbe, have_popcnt
- mips: use_movnz_instructions, use_mips32_instructions,
use_mips32r2_instructions, got_sigill (tcg_target_detect_isa)
- ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr
- s390: tb_ret_addr, s390_facilities
- sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines),
use_vis3_instructions
Only written by tcg_prologue_init:
- 'struct jit_code_entry one_entry'
- aarch64: tb_ret_addr
- arm: tb_ret_addr
- i386: tb_ret_addr, guest_base_flags
- ia64: tb_ret_addr
- mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
The naive solution here is to split code_gen_buffer statically
among the TCG threads; this however results in poor utilization
if translation needs are different across TCG threads.
What we do here is to add an extra layer of indirection, assigning
regions that act just like pages do in virtual memory allocation.
(BTW if you are wondering about the chosen naming, I did not want
to use blocks or pages because those are already heavily used in QEMU).
We use a global lock to serialize allocations as well as statistics
reporting (we now export the size of the used code_gen_buffer with
tcg_code_size()). Note that for the allocator we could just use
a counter and atomic_inc; however, that would complicate the gathering
of tcg_code_size()-like stats. So given that the region operations are
not a fast path, a lock seems the most reasonable choice.
The effectiveness of this approach is clear after seeing some numbers.
I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark.
Note that I'm evaluating this after enabling per-thread TCG (which
is done by a subsequent commit).
* -smp 1, 1 region (entire buffer):
qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357
qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363
qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364
qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373
qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373
qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360
qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370
qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367
That is, 8 flushes.
* -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]:
qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356
qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361
qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361
qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375
qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375
qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360
qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365
qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368
Again, 8 flushes. Note how buffer utilization is not 100%, but it
is close. Smaller region sizes would yield higher utilization,
but we want region allocation to be rare (it acquires a lock), so
we do not want to go too small.
* -smp 8, static partitioning of 8 regions (10 MB per region):
qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354
qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370
qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365
qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377
qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358
qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367
qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364
qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358
qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362
qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372
qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374
qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376
qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374
qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372
qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359
qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362
qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368
qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378
qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367
qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364
That is, 20 flushes. Note how a static partitioning approach uses
the code buffer poorly, leading to many unnecessary flushes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
While at it, also allocate temps_used directly as a bitmap of the
required size, instead of using a bitmap of TCG_MAX_TEMPS via
TCGTempSet.
Performance-wise we lose about 1.12% in a translation-heavy workload
such as booting+shutting down debian-arm:
Performance counter stats for 'taskset -c 0 arm-softmmu/qemu-system-arm \
-machine type=virt -nographic -smp 1 -m 4096 \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-device,netdev=unet \
-drive file=die-on-boot.qcow2,id=myblock,index=0,if=none \
-device virtio-blk-device,drive=myblock \
-kernel kernel.img -append console=ttyAMA0 root=/dev/vda1 \
-name arm,debug-threads=on -smp 1' (10 runs):
exec time (s) Relative slowdown wrt original (%)
---------------------------------------------------------------
original 20.213321616 0.
tcg_malloc 20.441130078 1.1270214
TCGContext 20.477846517 1.3086662
g_malloc 20.780527895 2.8061013
The other two alternatives shown in the table are:
- TCGContext: embed temps[TCG_MAX_TEMPS] and TCGTempSet used_temps
in TCGContext. This is simple enough but it isn't faster than using
tcg_malloc; moreover, it wastes memory.
- g_malloc: allocate/deallocate both temps and used_temps every time
tcg_optimize is executed.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is groundwork for supporting multiple TCG contexts.
To avoid scalability issues when profiling info is enabled, this patch
makes the profiling info counters distributed via the following changes:
1) Consolidate profile info into its own struct, TCGProfile, which
TCGContext also includes. Note that tcg_table_op_count is brought
into TCGProfile after dropping the tcg_ prefix.
2) Iterate over the TCG contexts in the system to obtain the total counts.
This change also requires updating the accessors to TCGProfile fields to
use atomic_read/set whenever there may be conflicting accesses (as defined
in C11) to them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Note that having n_tcg_ctxs is unnecessary. However, it is
convenient to have it, since it will simplify iterating over the
array: we'll have just a for loop instead of having to iterate
over a NULL-terminated array (which would require n+1 elems)
or having to check with ifdef's for usermode/softmmu.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
The core of this patch is this change to tcg/tcg.h:
> -extern TCGContext tcg_ctx;
> +extern TCGContext tcg_init_ctx;
> +extern TCGContext *tcg_ctx;
Note that for now we set *tcg_ctx to whatever TCGContext is passed
to tcg_context_init -- in this case &tcg_init_ctx.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting multiple TCG contexts.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby decoupling the resulting translated code from the current state
of the system.
The tb->cflags field is not passed to tcg generation functions. So
we add a field to TCGContext, storing there a copy of tb->cflags.
Most architectures have <= 32 registers, which results in a 4-byte hole
in TCGContext. Use this hole for the new field.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using the offset of a temporary, relative to TCGContext, rather than
its index means that we don't use 0. That leaves offset 0 free for
a NULL representation without having to leave index 0 unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we used structures for TCGv_*, we needed a macro in order to
perform a comparison. Now that we use pointers, this is just clutter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GET and MAKE functions weren't really specific enough.
We now have a full complement of functions that convert exactly
between temporaries, arguments, tcgv pointers, and indices.
The target/sparc change is also a bug fix, which would have affected
a host that defines TCG_TARGET_HAS_extr[lh]_i64_i32, i.e. MIPS64.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Transform TCGv_* to an "argument" or a temporary.
For now, an argument is simply the temporary index.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we're touching many of the lines anyway, adjust the naming
of the functions to better distinguish when "TCGArg" vs "TCGTemp"
should be used.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Copy s->nb_globals or s->nb_temps to a local variable for the purposes
of iteration. This should allow the compiler to use low-overhead
looping constructs on some hosts.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This avoids having to allocate external memory for each temporary.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, drop the TCGContext argument and use tcg_ctx instead.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
