tcg: Split CONFIG_ATOMIC128

GCC7+ will no longer advertise support for 16-byte __atomic operations
if only cmpxchg is supported, as for x86_64.  Fortunately, x86_64 still
has support for __sync_compare_and_swap_16 and we can make use of that.
AArch64 does not have, nor ever has had such support, so open-code it.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg/atomic_template.h

@@ -100,19 +100,24 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
     DATA_TYPE ret;
 
     ATOMIC_TRACE_RMW;
+#if DATA_SIZE == 16
+    ret = atomic16_cmpxchg(haddr, cmpv, newv);
+#else
     ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
+#endif
     ATOMIC_MMU_CLEANUP;
     return ret;
 }
 
 #if DATA_SIZE >= 16
+#if HAVE_ATOMIC128
 ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
 {
     ATOMIC_MMU_DECLS;
     DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
 
     ATOMIC_TRACE_LD;
-    __atomic_load(haddr, &val, __ATOMIC_RELAXED);
+    val = atomic16_read(haddr);
     ATOMIC_MMU_CLEANUP;
     return val;
 }
@@ -124,9 +129,10 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
     DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
 
     ATOMIC_TRACE_ST;
-    __atomic_store(haddr, &val, __ATOMIC_RELAXED);
+    atomic16_set(haddr, val);
     ATOMIC_MMU_CLEANUP;
 }
+#endif
 #else
 ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
                            ABI_TYPE val EXTRA_ARGS)
@@ -228,19 +234,24 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
     DATA_TYPE ret;
 
     ATOMIC_TRACE_RMW;
+#if DATA_SIZE == 16
+    ret = atomic16_cmpxchg(haddr, BSWAP(cmpv), BSWAP(newv));
+#else
     ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
+#endif
     ATOMIC_MMU_CLEANUP;
     return BSWAP(ret);
 }
 
 #if DATA_SIZE >= 16
+#if HAVE_ATOMIC128
 ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
 {
     ATOMIC_MMU_DECLS;
     DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
 
     ATOMIC_TRACE_LD;
-    __atomic_load(haddr, &val, __ATOMIC_RELAXED);
+    val = atomic16_read(haddr);
     ATOMIC_MMU_CLEANUP;
     return BSWAP(val);
 }
@@ -253,9 +264,10 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
 
     ATOMIC_TRACE_ST;
     val = BSWAP(val);
-    __atomic_store(haddr, &val, __ATOMIC_RELAXED);
+    atomic16_set(haddr, val);
     ATOMIC_MMU_CLEANUP;
 }
+#endif
 #else
 ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
                            ABI_TYPE val EXTRA_ARGS)

accel/tcg/cputlb.c

@@ -32,6 +32,7 @@
 #include "exec/log.h"
 #include "exec/helper-proto.h"
 #include "qemu/atomic.h"
+#include "qemu/atomic128.h"
 
 /* DEBUG defines, enable DEBUG_TLB_LOG to log to the CPU_LOG_MMU target */
 /* #define DEBUG_TLB */
@@ -1112,7 +1113,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
 #include "atomic_template.h"
 #endif
 
-#ifdef CONFIG_ATOMIC128
+#if HAVE_CMPXCHG128 || HAVE_ATOMIC128
 #define DATA_SIZE 16
 #include "atomic_template.h"
 #endif

accel/tcg/user-exec.c

@@ -25,6 +25,7 @@
 #include "exec/cpu_ldst.h"
 #include "translate-all.h"
 #include "exec/helper-proto.h"
+#include "qemu/atomic128.h"
 
 #undef EAX
 #undef ECX
@@ -615,7 +616,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
 /* The following is only callable from other helpers, and matches up
    with the softmmu version.  */
 
-#ifdef CONFIG_ATOMIC128
+#if HAVE_ATOMIC128 || HAVE_CMPXCHG128
 
 #undef EXTRA_ARGS
 #undef ATOMIC_NAME
@@ -628,4 +629,4 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
 
 #define DATA_SIZE 16
 #include "atomic_template.h"
-#endif /* CONFIG_ATOMIC128 */
+#endif

configure

@@ -5154,6 +5154,21 @@ EOF
   fi
 fi
 
+cmpxchg128=no
+if test "$int128" = yes -a "$atomic128" = no; then
+  cat > $TMPC << EOF
+int main(void)
+{
+  unsigned __int128 x = 0, y = 0;
+  __sync_val_compare_and_swap_16(&x, y, x);
+  return 0;
+}
+EOF
+  if compile_prog "" "" ; then
+    cmpxchg128=yes
+  fi
+fi
+
 #########################################
 # See if 64-bit atomic operations are supported.
 # Note that without __atomic builtins, we can only
@@ -6663,6 +6678,10 @@ if test "$atomic128" = "yes" ; then
   echo "CONFIG_ATOMIC128=y" >> $config_host_mak
 fi
 
+if test "$cmpxchg128" = "yes" ; then
+  echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
+fi
+
 if test "$atomic64" = "yes" ; then
   echo "CONFIG_ATOMIC64=y" >> $config_host_mak
 fi

include/qemu/atomic128.h

@@ -0,0 +1,153 @@
+/*
+ * Simple interface for 128-bit atomic operations.
+ *
+ * Copyright (C) 2018 Linaro, Ltd.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * See docs/devel/atomics.txt for discussion about the guarantees each
+ * atomic primitive is meant to provide.
+ */
+
+#ifndef QEMU_ATOMIC128_H
+#define QEMU_ATOMIC128_H
+
+/*
+ * GCC is a house divided about supporting large atomic operations.
+ *
+ * For hosts that only have large compare-and-swap, a legalistic reading
+ * of the C++ standard means that one cannot implement __atomic_read on
+ * read-only memory, and thus all atomic operations must synchronize
+ * through libatomic.
+ *
+ * See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80878
+ *
+ * This interpretation is not especially helpful for QEMU.
+ * For softmmu, all RAM is always read/write from the hypervisor.
+ * For user-only, if the guest doesn't implement such an __atomic_read
+ * then the host need not worry about it either.
+ *
+ * Moreover, using libatomic is not an option, because its interface is
+ * built for std::atomic<T>, and requires that *all* accesses to such an
+ * object go through the library.  In our case we do not have an object
+ * in the C/C++ sense, but a view of memory as seen by the guest.
+ * The guest may issue a large atomic operation and then access those
+ * pieces using word-sized accesses.  From the hypervisor, we have no
+ * way to connect those two actions.
+ *
+ * Therefore, special case each platform.
+ */
+
+#if defined(CONFIG_ATOMIC128)
+static inline Int128 atomic16_cmpxchg(Int128 *ptr, Int128 cmp, Int128 new)
+{
+    return atomic_cmpxchg__nocheck(ptr, cmp, new);
+}
+# define HAVE_CMPXCHG128 1
+#elif defined(CONFIG_CMPXCHG128)
+static inline Int128 atomic16_cmpxchg(Int128 *ptr, Int128 cmp, Int128 new)
+{
+    return __sync_val_compare_and_swap_16(ptr, cmp, new);
+}
+# define HAVE_CMPXCHG128 1
+#elif defined(__aarch64__)
+/* Through gcc 8, aarch64 has no support for 128-bit at all.  */
+static inline Int128 atomic16_cmpxchg(Int128 *ptr, Int128 cmp, Int128 new)
+{
+    uint64_t cmpl = int128_getlo(cmp), cmph = int128_gethi(cmp);
+    uint64_t newl = int128_getlo(new), newh = int128_gethi(new);
+    uint64_t oldl, oldh;
+    uint32_t tmp;
+
+    asm("0: ldaxp %[oldl], %[oldh], %[mem]\n\t"
+        "cmp %[oldl], %[cmpl]\n\t"
+        "ccmp %[oldh], %[cmph], #0, eq\n\t"
+        "b.ne 1f\n\t"
+        "stlxp %w[tmp], %[newl], %[newh], %[mem]\n\t"
+        "cbnz %w[tmp], 0b\n"
+        "1:"
+        : [mem] "+m"(*ptr), [tmp] "=&r"(tmp),
+          [oldl] "=&r"(oldl), [oldh] "=r"(oldh)
+        : [cmpl] "r"(cmpl), [cmph] "r"(cmph),
+          [newl] "r"(newl), [newh] "r"(newh)
+        : "memory", "cc");
+
+    return int128_make128(oldl, oldh);
+}
+# define HAVE_CMPXCHG128 1
+#else
+/* Fallback definition that must be optimized away, or error.  */
+Int128 QEMU_ERROR("unsupported atomic")
+    atomic16_cmpxchg(Int128 *ptr, Int128 cmp, Int128 new);
+# define HAVE_CMPXCHG128 0
+#endif /* Some definition for HAVE_CMPXCHG128 */
+
+
+#if defined(CONFIG_ATOMIC128)
+static inline Int128 atomic16_read(Int128 *ptr)
+{
+    return atomic_read__nocheck(ptr);
+}
+
+static inline void atomic16_set(Int128 *ptr, Int128 val)
+{
+    atomic_set__nocheck(ptr, val);
+}
+
+# define HAVE_ATOMIC128 1
+#elif !defined(CONFIG_USER_ONLY) && defined(__aarch64__)
+/* We can do better than cmpxchg for AArch64.  */
+static inline Int128 atomic16_read(Int128 *ptr)
+{
+    uint64_t l, h;
+    uint32_t tmp;
+
+    /* The load must be paired with the store to guarantee not tearing.  */
+    asm("0: ldxp %[l], %[h], %[mem]\n\t"
+        "stxp %w[tmp], %[l], %[h], %[mem]\n\t"
+        "cbnz %w[tmp], 0b"
+        : [mem] "+m"(*ptr), [tmp] "=r"(tmp), [l] "=r"(l), [h] "=r"(h));
+
+    return int128_make128(l, h);
+}
+
+static inline void atomic16_set(Int128 *ptr, Int128 val)
+{
+    uint64_t l = int128_getlo(val), h = int128_gethi(val);
+    uint64_t t1, t2;
+
+    /* Load into temporaries to acquire the exclusive access lock.  */
+    asm("0: ldxp %[t1], %[t2], %[mem]\n\t"
+        "stxp %w[t1], %[l], %[h], %[mem]\n\t"
+        "cbnz %w[t1], 0b"
+        : [mem] "+m"(*ptr), [t1] "=&r"(t1), [t2] "=&r"(t2)
+        : [l] "r"(l), [h] "r"(h));
+}
+
+# define HAVE_ATOMIC128 1
+#elif !defined(CONFIG_USER_ONLY) && HAVE_CMPXCHG128
+static inline Int128 atomic16_read(Int128 *ptr)
+{
+    /* Maybe replace 0 with 0, returning the old value.  */
+    return atomic16_cmpxchg(ptr, 0, 0);
+}
+
+static inline void atomic16_set(Int128 *ptr, Int128 val)
+{
+    Int128 old = *ptr, cmp;
+    do {
+        cmp = old;
+        old = atomic16_cmpxchg(ptr, cmp, val);
+    } while (old != cmp);
+}
+
+# define HAVE_ATOMIC128 1
+#else
+/* Fallback definitions that must be optimized away, or error.  */
+Int128 QEMU_ERROR("unsupported atomic") atomic16_read(Int128 *ptr);
+void QEMU_ERROR("unsupported atomic") atomic16_set(Int128 *ptr, Int128 val);
+# define HAVE_ATOMIC128 0
+#endif /* Some definition for HAVE_ATOMIC128 */
+
+#endif /* QEMU_ATOMIC128_H */

include/qemu/compiler.h

@@ -146,6 +146,17 @@
 # define QEMU_FLATTEN
 #endif
 
+/*
+ * If __attribute__((error)) is present, use it to produce an error at
+ * compile time.  Otherwise, one must wait for the linker to diagnose
+ * the missing symbol.
+ */
+#if __has_attribute(error)
+# define QEMU_ERROR(X) __attribute__((error(X)))
+#else
+# define QEMU_ERROR(X)
+#endif
+
 /* Implement C11 _Generic via GCC builtins.  Example:
  *
  *    QEMU_GENERIC(x, (float, sinf), (long double, sinl), sin) (x)

tcg/tcg.h

@@ -32,6 +32,7 @@
 #include "qemu/queue.h"
 #include "tcg-mo.h"
 #include "tcg-target.h"
+#include "qemu/int128.h"
 
 /* XXX: make safe guess about sizes */
 #define MAX_OP_PER_INSTR 266
@@ -1456,11 +1457,14 @@ GEN_ATOMIC_HELPER_ALL(xchg)
 #undef GEN_ATOMIC_HELPER
 #endif /* CONFIG_SOFTMMU */
 
-#ifdef CONFIG_ATOMIC128
-#include "qemu/int128.h"
-
-/* These aren't really a "proper" helpers because TCG cannot manage Int128.
-   However, use the same format as the others, for use by the backends. */
+/*
+ * These aren't really a "proper" helpers because TCG cannot manage Int128.
+ * However, use the same format as the others, for use by the backends.
+ *
+ * The cmpxchg functions are only defined if HAVE_CMPXCHG128;
+ * the ld/st functions are only defined if HAVE_ATOMIC128,
+ * as defined by <qemu/atomic128.h>.
+ */
 Int128 helper_atomic_cmpxchgo_le_mmu(CPUArchState *env, target_ulong addr,
                                      Int128 cmpv, Int128 newv,
                                      TCGMemOpIdx oi, uintptr_t retaddr);
@@ -1477,6 +1481,4 @@ void helper_atomic_sto_le_mmu(CPUArchState *env, target_ulong addr, Int128 val,
 void helper_atomic_sto_be_mmu(CPUArchState *env, target_ulong addr, Int128 val,
                               TCGMemOpIdx oi, uintptr_t retaddr);
 
-#endif /* CONFIG_ATOMIC128 */
-
 #endif /* TCG_H */