Introduce this field to control whether ACPI build is enabled by a
particular machine or accelerator.
It defaults to true if the machine itself supports ACPI build. Xen
accelerator will disable it because Xen is in charge of building ACPI
tables for the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Upstream NBD protocol recently added the ability to efficiently
write zeroes without having to send the zeroes over the wire,
along with a flag to control whether the client wants to allow
a hole.
Note that when it comes to requiring full allocation, vs.
permitting optimizations, the NBD spec intentionally picked a
different sense for the flag; the rules in qemu are:
MAY_UNMAP == 0: must write zeroes
MAY_UNMAP == 1: may use holes if reads will see zeroes
while in NBD, the rules are:
FLAG_NO_HOLE == 1: must write zeroes
FLAG_NO_HOLE == 0: may use holes if reads will see zeroes
In all cases, the 'may use holes' scenario is optional (the
server need not use a hole, and must not use a hole if
subsequent reads would not see zeroes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-16-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NBD commit 6d34500b clarified how clients and servers are supposed
to behave before closing a connection. It added NBD_REP_ERR_SHUTDOWN
(for the server to announce it is about to go away during option
haggling, so the client should quit sending NBD_OPT_* other than
NBD_OPT_ABORT) and ESHUTDOWN (for the server to announce it is about
to go away during transmission, so the client should quit sending
NBD_CMD_* other than NBD_CMD_DISC). It also clarified that
NBD_OPT_ABORT gets a reply, while NBD_CMD_DISC does not.
This patch merely adds the missing reply to NBD_OPT_ABORT and teaches
the client to recognize server errors. Actually teaching the server
to send NBD_REP_ERR_SHUTDOWN or ESHUTDOWN would require knowing that
the server has been requested to shut down soon (maybe we could do
that by installing a SIGINT handler in qemu-nbd, which transitions
from RUNNING to a new state that waits for the client to react,
rather than just out-right quitting - but that's a bigger task for
another day).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-15-git-send-email-eblake@redhat.com>
[Move dummy ESHUTDOWN to include/qemu/osdep.h. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol allows the server and client to mutually agree
on a shorter handshake (omit the 124 bytes of reserved 0), via
the server advertising NBD_FLAG_NO_ZEROES and the client
acknowledging with NBD_FLAG_C_NO_ZEROES (only possible in
newstyle, whether or not it is fixed newstyle). It doesn't
shave much off the wire, but we might as well implement it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Message-Id: <1476469998-28592-13-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than open-coding each option request, it's easier to
have common helper functions do the work. That in turn requires
having convenient packed types for handling option requests
and replies.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-9-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our coding convention prefers CamelCase names, and we already
have other existing structs with NBDFoo naming. Let's be
consistent, before later patches add even more structs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-6-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current upstream NBD documents that requests have a 16-bit flags,
followed by a 16-bit type integer; although older versions mentioned
only a 32-bit field with masking to find flags. Since the protocol
is in network order (big-endian over the wire), the ABI is unchanged;
but dealing with the flags as a separate field rather than masking
will make it easier to add support for upcoming NBD extensions that
increase the number of both flags and commands.
Improve some comments in nbd.h based on the current upstream
NBD protocol (https://github.com/yoe/nbd/blob/master/doc/proto.md),
and touch some nearby code to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol allows servers to advertise a human-readable
description alongside an export name during NBD_OPT_LIST. Add
an option to pass through the user's string to the NBD client.
Doing this also makes it easier to test commit 200650d4, which
is the client counterpart of receiving the description.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
_GPE.E04 is dedicated for nvdimm device hotplug
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug
As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.
@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access
As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an ACPI Namespace Device under
the root device
So it builds nvdimm devices for all slots to support vNVDIMM hotplug
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make crypto operations are executed asynchronously,
so that other QEMU threads and monitor couldn't
be blocked at the virtqueue handling context.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use an opaque point to the VirtIOCryptoReq which
can support different packets based on different
algorithms.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduces VirtIOCryptoReq structure to store
crypto request so that we can easily support
asynchronous crypto operation in the future.
At present, we only support cipher and algorithm
chaining.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the capacity of algorithms supported by
virtio crypto device to the frontend driver using
pci configuration space.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the virtio crypto realization, I'll
finish the core code in the following patches. The
thoughts came from virtio net realization.
For more information see:
http://qemu-project.org/Features/VirtioCrypto
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reuse the existing locking provided by stdio to keep in_asm, cpu,
op, op_opt, op_ind, and out_asm as contiguous blocks.
While it isn't possible to interleave e.g. in_asm or op_opt logs
because of the TB lock protecting all code generation, it is
possible to interleave cpu logs, or to interleave a cpu dump with
an out_asm dump.
For mingw32, we appear to have no viable solution for this. The locking
functions are not properly exported from the system runtime library.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Implement error_vprintf to send the output of error_report to
the test log. This silences test-vmstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-3-git-send-email-pbonzini@redhat.com>
Leave the implementation of error_vprintf and error_vprintf_unless_qmp
(the latter now trivially wrapped by error_printf_unless_qmp) to
libqemustub.a and monitor.c. This has two advantages: it lets us
remove the monitor_printf and monitor_vprintf stubs, and it lets
tests provide a different implementation of the functions that uses
g_test_message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-2-git-send-email-pbonzini@redhat.com>
(Trivial)
Fix wrong function names in documentation.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-8-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
To make it a little more obvious which functions are intended to be
public interface and which are intended to be for use only by jobs
themselves, split the interface into "public" and "private" files.
Convert blockjobs (e.g. block/backup) to using the private interface.
Leave blockdev and others on the public interface.
There are remaining uses of private state by qemu-img, and several
cases in blockdev.c and block/io.c where we grab job->blk for the
purposes of acquiring an AIOContext.
These will be corrected in future patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-7-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
BlockJobs will begin hiding their state in preparation for some
refactorings anyway, so let's internalize the user_pause mechanism
instead of leaving it to callers to correctly manage.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
There's no reason to leave this to blockdev; we can do it in blockjobs
directly and get rid of an extra callback for most users.
All non-internal events, even those created outside of QMP, will
consistently emit events.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-5-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Bubble up the internal interface to commit and backup jobs, then switch
replication tasks over to using this methodology.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add the ability to create jobs without an ID.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1477584421-1399-3-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
If jobs are not created directly by the user, do not allow them to be
seen by the user/management utility. At the moment, 'internal' jobs are
those that do not have an ID. As of this patch it is impossible to
create such jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1477584421-1399-2-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Hglo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 31 Oct 2016 16:10:07 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (29 commits)
qapi: allow blockdev-add for NFS
block/nfs: Introduce runtime_opts in NFS
block: Mention replication in BlockdevDriver enum docs
qemu-iotests: test 'offset' and 'size' options in raw driver
raw_bsd: add offset and size options
qemu-iotests: Test the 'base-node' parameter of 'block-stream'
block: Add 'base-node' parameter to the 'block-stream' command
qemu-iotests: Test streaming to a Quorum child
qemu-iotests: Add iotests.supports_quorum()
qemu-iotests: Test block-stream and block-commit in parallel
qemu-iotests: Test overlapping stream and commit operations
qemu-iotests: Test block-stream operations in parallel
qemu-iotests: Test streaming to an intermediate layer
docs: Document how to stream to an intermediate layer
block: Add QMP support for streaming to an intermediate layer
block: Support streaming to an intermediate layer
block: Block all intermediate nodes in commit_active_start()
block: Block all nodes involved in the block-commit operation
block: Check blockers in all nodes involved in a block-commit job
block: Use block_job_add_bdrv() in backup_start()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With a vfio assigned device we lay down a base MemoryRegion registered
as an IO region, giving us read & write accessors. If the region
supports mmap, we lay down a higher priority sub-region MemoryRegion
on top of the base layer initialized as a RAM device pointer to the
mmap. Finally, if we have any quirks for the device (ie. address
ranges that need additional virtualization support), we put another IO
sub-region on top of the mmap MemoryRegion. When this is flattened,
we now potentially have sub-page mmap MemoryRegions exposed which
cannot be directly mapped through KVM.
This is as expected, but a subtle detail of this is that we end up
with two different access mechanisms through QEMU. If we disable the
mmap MemoryRegion, we make use of the IO MemoryRegion and service
accesses using pread and pwrite to the vfio device file descriptor.
If the mmap MemoryRegion is enabled and results in one of these
sub-page gaps, QEMU handles the access as RAM, using memcpy to the
mmap. Using either pread/pwrite or the mmap directly should be
correct, but using memcpy causes us problems. I expect that not only
does memcpy not necessarily honor the original width and alignment in
performing a copy, but it potentially also uses processor instructions
not intended for MMIO spaces. It turns out that this has been a
problem for Realtek NIC assignment, which has such a quirk that
creates a sub-page mmap MemoryRegion access.
To resolve this, we disable memory_access_is_direct() for ram_device
regions since QEMU assumes that it can use memcpy for those regions.
Instead we access through MemoryRegionOps, which replaces the memcpy
with simple de-references of standard sizes to the host memory.
With this patch we attempt to provide unrestricted access to the RAM
device, allowing byte through qword access as well as unaligned
access. The assumption here is that accesses initiated by the VM are
driven by a device specific driver, which knows the device
capabilities. If unaligned accesses are not supported by the device,
we don't want them to work in a VM by performing multiple aligned
accesses to compose the unaligned access. A down-side of this
philosophy is that the xp command from the monitor attempts to use
the largest available access weidth, unaware of the underlying
device. Using memcpy had this same restriction, but at least now an
operator can dump individual registers, even if blocks of device
memory may result in access widths beyond the capabilities of a
given device (RTL NICs only support up to dword).
Reported-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Setting skip_dump on a MemoryRegion allows us to modify one specific
code path, but the restriction we're trying to address encompasses
more than that. If we have a RAM MemoryRegion backed by a physical
device, it not only restricts our ability to dump that region, but
also affects how we should manipulate it. Here we recognize that
MemoryRegions do not change to sometimes allow dumps and other times
not, so we replace setting the skip_dump flag with a new initializer
so that we know exactly the type of region to which we're applying
this behavior.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
When a block job is created on a certain BlockDriverState, operations
are blocked there while the job exists. However, some block jobs may
involve additional BDSs, which must be blocked separately when the job
is created and unblocked manually afterwards.
This patch adds block_job_add_bdrv(), that simplifies this process by
keeping a list of BDSs that are involved in the specified block job.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_drain_all() doesn't allow the caller to do anything after all
pending requests have been completed but before block jobs are
resumed.
This patch splits bdrv_drain_all() into _begin() and _end() for that
purpose. It also adds aio_{disable,enable}_external() calls to disable
external clients in the meantime.
An important restriction of this split is that no new block jobs or
BlockDriverStates can be created between the bdrv_drain_all_begin()
and bdrv_drain_all_end() calls. This is not a concern now because
we'll only be using this in bdrv_reopen_multiple(), but it must be
dealt with if we ever have other uses cases in the future.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make inet_connect_saddr() in util/qemu-sockets.c public in order to be
able to use it with InetSocketAddress sockets outside of
util/qemu-sockets.c independently.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes the *_run_on_cpu APIs (and helpers) to pass data in a
run_on_cpu_data type instead of a plain void *. This is because we
sometimes want to pass a target address (target_ulong) and this fails on
32 bit hosts emulating 64 bit guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sur7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging
Migration bits from the COLO project
# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg: using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6
# Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670
* remotes/amit-migration/tags/migration-for-2.8:
MAINTAINERS: Add maintainer for COLO framework related files
configure: Support enable/disable COLO feature
docs: Add documentation for COLO feature
COLO: Implement failover work for secondary VM
COLO: Implement the process of failover for primary VM
COLO: Introduce state to record failover process
COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
COLO: Synchronize PVM's state to SVM periodically
COLO: Add checkpoint-delay parameter for migrate-set-parameters
COLO: Load VMState into QIOChannelBuffer before restore it
COLO: Send PVM state to secondary side when do checkpoint
COLO: Add a new RunState RUN_STATE_COLO
COLO: Introduce checkpointing protocol
COLO: Establish a new communicating path for COLO
migration: Switch to COLO process after finishing loadvm
migration: Enter into COLO mode after migration if COLO is enabled
COLO: migrate COLO related info to secondary node
migration: Introduce capability 'x-colo' to migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJYE2ULAAoJEMo1YkxqkXHGvvAH/iDPIAiwBXbndL3KhQTneSHn
ctd4I3VK1/VVTIBRJIetqETiWiAm/WoRhI9kBc/NrQxBFx3ko+fpSYFS2t6lJYnV
EX0vjTKjFhr05tOTQDH/SQtHdU5x/x2M8SsxqrCcTyLm5VDfdPeBlMBfSNMj/L2K
bwinANVEwr6LOM0h8weQ0SvOCa5MLII2p5ufGwKQmhUY5tgZvFlyPa+quDVisKoE
7CpLwWHmUQSNxUXSaru90osUJyk90wCcYxPpJN3YO1MHvpH4kG8DpZ8bnFqLAoNw
zkRdqIrlfntD+mKDqRU1y0GXxu9I4VK1UDcQyRFoSdMi2oHR+L018sQEjCYTAXo=
=n+CF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
aio: convert from RFifoLock to QemuRecMutex
qemu-thread: introduce QemuRecMutex
iothread: release AioContext around aio_poll
block: only call aio_poll on the current thread's AioContext
qemu-img: call aio_context_acquire/release around block job
qemu-io: acquire AioContext
block: prepare bdrv_reopen_multiple to release AioContext
replication: pass BlockDriverState to reopen_backing_file
iothread: detach all block devices before stopping them
aio: introduce qemu_get_current_aio_context
sheepdog: use BDRV_POLL_WHILE
nfs: use BDRV_POLL_WHILE
nfs: move nfs_set_events out of the while loops
block: introduce BDRV_POLL_WHILE
qed: Implement .bdrv_drain
block: change drain to look only at one child at a time
block: add BDS field to count in-flight requests
mirror: use bdrv_drained_begin/bdrv_drained_end
blockjob: introduce .drain callback for jobs
replication: interrupt failover if the main device is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
softmmu requires more functions to be thread-safe, because translation
blocks can be invalidated from e.g. notdirty callbacks. Probably the
same holds for user-mode emulation, it's just that no one has ever
tried to produce a coherent locking there.
This patch will guide the introduction of more tb_lock and tb_unlock
calls for system emulation.
Note that after this patch some (most) of the mentioned functions are
still called outside tb_lock/tb_unlock. The next one will rectify this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-7-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds asserts to check the locking on the various translation
engines structures. There are two sets of structures that are protected
by locks.
The first the l1map and PageDesc structures used to track which
translation blocks are associated with which physical addresses. In
user-mode this is covered by the mmap_lock.
The second case are TB context related structures which are protected by
tb_lock which is also user-mode only.
Currently the asserts do nothing in SoftMMU mode but this will change
for MTTCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the virtio_crypto.h which follows
virtio-crypto specification.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds session operation and crypto operation
stuff in the cryptodev backend, including function
pointers and corresponding structures.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cryptodev backend interface is used to realize the active work for
virtual crypto device.
This patch only add the framework, doesn't include specific operations.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that there is not anymore a switch from the generic ioeventfd handler
to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is
always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd
does nothing in this case. Move the invocation to vhost.c, which is the
only place that needs it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 872dd82c83.
virtio_add_queue_aio is unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Override start_ioeventfd and stop_ioeventfd to start/stop the
whole dataplane logic. This has some positive side effects:
- no need anymore for virtio_add_queue_aio (i.e. a revert of
commit 1c627137c1)
- no need anymore to switch from generic ioeventfd handlers to
dataplane
It detects some errors better:
$ qemu-system-x86_64 -object iothread,id=io \
-device virtio-scsi-pci,ioeventfd=off,iothread=io
qemu-system-x86_64: -device virtio-scsi-pci,ioeventfd=off,iothread=io:
ioeventfd is required for iothread
while previously it would have started just fine.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow customization of the start and stop of ioeventfd. This will
allow direct start of dataplane without passing through the default
ioeventfd handlers, which in turn allows using the dataplane logic
instead of virtio_add_queue_aio. It will also enable some code
simplification, because the sole entry point to ioeventfd setup
will be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a vmsd pointer for VirtIO devices to use instead of the
load/save methods.
We'll eventually kill off the load/save methods.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.
We reuse migration thread, so the process of checkpointing will be handled
in migration thread.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We can determine whether or not VM in destination should go into COLO mode
by referring to the info that was migrated.
We skip this section if COLO is not enabled (i.e.
migrate_set_capability colo off), so that, It doesn't break compatibility
with migration no matter whether users configure the --enable-colo/disable-colo
on the source/destination side or not;
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
The default value for COLO (COarse-Grain LOck Stepping) is disabled.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Prepare xen_be_del_xendev to be shared with frontends:
* xen_be_del_xendev -> xen_pv_del_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_find_xendev to be shared with frontends:
* xen_be_find_xendev -> xen_pv_find_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_evtchn_event to be shared with frontends:
* xen_be_evtchn_event -> xen_pv_evtchn_event
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_send_notify to be shared with frontends:
* xen_be_send_notify -> xen_pv_send_notify
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_unbind_evtchn to be shared with frontends:
* xen_be_unbind_evtchn -> xen_pv_unbind_evtchn
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_printf to be used by both backend and frontends:
* xen_be_printf -> xen_pv_printf
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
* move xendevs qtail to xen_pvdev.c
* change xen_be_get_xendev to use a new function: xen_pv_insert_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The name of the functions moved:
* xen_be_evtchn_event
* xen_be_unbind_evtchn
* xen_be_send_notify
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The purpose of the new file is to store generic functions shared by frontend
and backends such as xenstore operations, xendevs.
Signed-off-by: Quan Xu <quan.xu@intel.com>
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes:
* WARNING: line over 80 characters
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3Z5V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYEfjrAAoJEL6G67QVEE/fdU4P/i7yBJo436OpkdgeWS8AWuFr
ptZ+Fj/weGka5GU9E3KQu36kbSgrtfcgwTHphCMXnZ0YCeKQDuM57f7LNiN6qheB
nqgJvJioLbUvLTQvCHOISM7bWOnYvASBmYtLJFtUcP/jhdOy61KaADnJ+7MbliNv
yJSW2RN+s/y9nUb+dxEpIXXUVMRa6BX+wHW3O44c1oLn6/Pe20aJeHTyDx3qiBhD
8RYXUgRZopH2bouBSzXgMQTbn/QMD/dC81WQlHKlt4swffyei2D/1pciOcuc0SXz
+SZdkTre5JB5Kd6DU8zQ6PrrIt1nPmLSptSyhQvNxm+uWNWHnFcW1s2aYmf/ikjl
4boW37ayJx09mns8yv7TerzEPbL5qJvVX8Dsnb6telkvrS9hy9S1xuIB5xHbt6/h
vwFmCdwaZoGpDDaoXRL+9k9TOI9BbEMKX33nAPDqvEXLMIf+og4fmweTKcY4XTRL
/Fdg1H71v8Ayv+r5TJOKwFg3PNNjnvqkbk1psS+aaW7dup43iaYGIKWy+VFaCufk
hPXLOtR5lUsYC2qm+nkjPIgoP7D8oZx4AGkCHbYsqzi+l1lynZH3rBIs8ggLr72o
FFk4g0sNYe1ccAa89jFEgWIQbS0N6ckUXCv12g3eyF/UIC1F35/mGGugSRnTXuc2
a/WsvgU7pGBrtqXcg7lF
=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is simpler and a bit faster, and QEMU does not need the contention
callbacks (and thus the fairness) anymore.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-21-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
GRecMutex is new in glib 2.32, so we cannot use it. Introduce
a recursive mutex in qemu-thread instead, which will be used
instead of RFifoLock.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-20-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is the first step towards having fine-grained critical sections in
dataplane threads, which will resolve lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Previously applied as a0710f7995 and
then reverted.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
After the next patch bdrv_drain_all will have to be called without holding any
AioContext. Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain)
to choose how to wait for I/O completion.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We want the BDS event loop to run exclusively in the iothread that
owns the BDS's AioContext. This macro will provide the synchronization
between the two event loops; for now it just wraps the common idiom
of a while loop around aio_poll.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-8-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Unlike tracked_requests, this field also counts throttled requests,
and remains non-zero if an AIO operation needs a BH to be "really"
completed.
With this change, it is no longer necessary to have a dummy
BdrvTrackedRequest for requests that are never serialising, and
it is no longer necessary to poll the AioContext once after
bdrv_requests_pending(bs) returns false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-5-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is required to decouple block jobs from running in an
AioContext. With multiqueue block devices, a BlockDriverState
does not really belong to a single AioContext.
The solution is to first wait until all I/O operations are
complete; then loop in the main thread for the block job to
complete entirely.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Add support for DRC count indexed hotplug ID type which is primarily
needed for memory hot unplug. This type allows for specifying the
number of DRs that should be plugged/unplugged starting from a given
DRC index.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
* updated rtas_event_log_v6_hp to reflect count/index field ordering
used in PAPR hotplug ACR
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hotplug events were previously delivered using an EPOW interrupt
and were queued by linux guests into a circular buffer. For traditional
EPOW events like shutdown/resets, this isn't an issue, but for hotplug
events there are cases where this buffer can be exhausted, resulting
in the loss of hotplug events, resets, etc.
Newer-style hotplug event are delivered using a dedicated event source.
We enable this in supported guests by adding standard an additional
event source in the guest device-tree via /event-sources, and, if
the guest advertises support for the newer-style hotplug events,
using the corresponding interrupt to signal the available of
hotplug/unplug events.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ibm,architecture-vec-5 is supposed to encode all option vector 5 bits
negotiated between platform/guest. Currently we hardcode this property
in the boot-time device tree to advertise a single negotiated
capability, "Form 1" NUMA Affinity, regardless of whether or not CAS
has been invoked or that capability has actually been negotiated.
Improve this by generating ibm,architecture-vec-5 based on the full
set of option vector 5 capabilities negotiated via CAS.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases, ibm,client-architecture-support calls can fail. This
could happen in the current code for situations where the modified
device tree segment exceeds the buffer size provided by the guest
via the call parameters. In these cases, QEMU will reset, allowing
an opportunity to regenerate the device tree from scratch via
boot-time handling. There are potentially other scenarios as well,
not currently reachable in the current code, but possible in theory,
such as cases where device-tree properties or nodes need to be removed.
We currently don't handle either of these properly for option vector
capabilities however. Instead of carrying the negotiated capability
beyond the reset and creating the boot-time device tree accordingly,
we start from scratch, generating the same boot-time device tree as we
did prior to the CAS-generated and the same device tree updates as we
did before. This could (in theory) cause us to get stuck in a reset
loop. This hasn't been observed, but depending on the extensiveness
of CAS-induced device tree updates in the future, could eventually
become an issue.
Address this by pulling capability-related device tree
updates resulting from CAS calls into a common routine,
spapr_dt_cas_updates(), and adding an sPAPROptionVector*
parameter that allows us to test for newly-negotiated capabilities.
We invoke it as follows:
1) When ibm,client-architecture-support gets called, we
call spapr_dt_cas_updates() with the set of capabilities
added since the previous call to ibm,client-architecture-support.
For the initial boot, or a system reset generated by something
other than the CAS call itself, this set will consist of *all*
options supported both the platform and the guest. For calls
to ibm,client-architecture-support immediately after a CAS-induced
reset, we call spapr_dt_cas_updates() with only the set
of capabilities added since the previous call, since the other
capabilities will have already been addressed by the boot-time
device-tree this time around. In the unlikely event that
capabilities are *removed* since the previous CAS, we will
generate a CAS-induced reset. In the unlikely event that we
cannot fit the device-tree updates into the buffer provided
by the guest, well generate a CAS-induced reset.
2) When a CAS update results in the need to reset the machine and
include the updates in the boot-time device tree, we call the
spapr_dt_cas_updates() using the full set of negotiated
capabilities as part of the reset path. At initial boot, or after
a reset generated by something other than the CAS call itself,
this set will be empty, resulting in what should be the same
boot-time device-tree as we generated prior to this patch. For
CAS-induced reset, this routine will be called with the full set of
capabilities negotiated by the platform/guest in the previous
CAS call, which should result in CAS updates from previous call
being accounted for in the initial boot-time device tree.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Changed an int -> bool conversion to be more explicit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we access individual bytes of an option vector via
ldub_phys() to test for the presence of a particular capability
within that byte. Currently this is only done for the "dynamic
reconfiguration memory" capability bit. If that bit is present,
we pass a boolean value to spapr_h_cas_compose_response()
to generate a modified device tree segment with the additional
properties required to enable this functionality.
As more capability bits are added, will would need to modify the
code to add additional option vector accesses and extend the
param list for spapr_h_cas_compose_response() to include similar
boolean values for these parameters.
Avoid this by switching to spapr_ovec_* helpers so we can do all
the parsing in one shot and then test for these additional bits
within spapr_h_cas_compose_response() directly.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR guests advertise their capabilities to the platform by passing
an ibm,architecture-vec structure via an
ibm,client-architecture-support hcall as described by LoPAPR v11,
B.6.2.3. during early boot.
Using this information, the platform enables the capabilities it
supports, then encodes a subset of those enabled capabilities (the
5th option vector of the ibm,architecture-vec structure passed to
ibm,client-architecture-support) into the guest device tree via
"/chosen/ibm,architecture-vec-5".
The logical format of these these option vectors is a bit-vector,
where individual bits are addressed/documented based on the byte-wise
offset from the beginning of the bit-vector, followed by the bit-wise
index starting from the byte-wise offset. Thus the bits of each of
these bytes are stored in reverse order. Additionally, the first
byte of each option vector is encodes the length of the option vector,
so byte offsets begin at 1, and bit offset at 0.
This is not very intuitive for the purposes of mapping these bits to
a particular documented capability, so this patch introduces a set
of abstractions that encapsulate the work of parsing/encoding these
options vectors and testing for individual capabilities.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Tweaked double-include protection to not trigger a checkpatch
false positive]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For historical reasons construction of the guest device tree in spapr is
divided between spapr_create_fdt_skel() which is called at init time, and
spapr_build_fdt() which runs at reset time. Over time, more and more
things have needed to be moved to reset time.
Previous cleanups mean the only things left in spapr_create_fdt_skel() are
the properties of the root node itself. Finish consolidating these two
parts of device tree construction, by moving this to the start of
spapr_build_fdt(), and removing spapr_create_fdt_skel() entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Construction of the /vdevice node (and its children) is divided between
spapr_create_fdt_skel() (at init time), which creates the base node, and
spapr_populate_vdevice() (at reset time) which creates the nodes for each
individual virtual device.
This consolidates both into a single function called from
spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The /event-sources device tree node is built from spapr_create_fdt_skel().
As part of consolidating device tree construction to reset time, this moves
it to spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons construction of the /rtas node in the device
tree (amongst others) is split into several places. In particular
it's split between spapr_create_fdt_skel(), spapr_build_fdt() and
spapr_rtas_device_tree_setup().
In fact, as well as adding the actual RTAS tokens to the device tree,
spapr_rtas_device_tree_setup() just adds the ibm,lrdr-capacity
property, which despite going in the /rtas node, doesn't have a lot to
do with RTAS.
This patch consolidates the code constructing /rtas together into a new
spapr_dt_rtas() function. spapr_rtas_device_tree_setup() is renamed to
spapr_dt_rtas_tokens() and now only adds the token properties.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons, building the /chosen node in the guest device tree
is split across several places and includes both parts which write the DT
sequentially and others which use random access functions.
This patch consolidates construction of the node into one place, using
random access functions throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the device tree node for the XICS interrupt controller is in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, this moves it to a function called from spapr_build_fdt().
In addition we move the actual code into hw/intc/xics_spapr.c with the
rest of the PAPR specific interrupt controller code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At each system reset, the pseries machine needs to load RTAS (the runtime
portion of the guest firmware) into the VM. This means copying
the actual RTAS code into guest memory, and also updating the device
tree so that the guest OS and boot firmware can locate it.
For historical reasons the copy and update to the device tree were in
different parts of the code. This cleanup brings them both together in
an spapr_load_rtas() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently spapr_create_fdt_skel() takes a bunch of individual parameters
for various things it will put in the device tree. Some of these can
already be taken directly from sPAPRMachineState. This patch alters it so
that all of them can be taken from there, which will allow this code to
be moved away from its current caller in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These values are used only within ppc_spapr_reset(), so just change them
to local variables.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As Qemu only supports a single instance of the ISA bus, we use the LPC
controller of chip 0 to create one and plug in a couple of useful
devices, like an UART and RTC. An IPMI BT device, which is also an ISA
device, can be defined on the command line to connect an external BMC.
That is for later.
The PowerNV machine now has a console. Skiboot should load a kernel
and jump into it but execution will stop quite early because we lack a
model for the native XICS controller for the moment :
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] XICS: Cannot find a Presentation Controller !
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/powerpc/platforms/powernv/setup.c:81
...
[ 0.000000] NIP [c00000000079d65c] pnv_init_IRQ+0x30/0x44
You can still do a few things under xmon.
Based on previous work from :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Trivial fix for a change in the serial_hds_isa_init() interface]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LPC (Low Pin Count) interface on a POWER8 is made accessible to
the system through the ADU (XSCOM interface). This interface is part
of set of units connected together via a local OPB (On-Chip Peripheral
Bus) which act as a bridge between the ADU and the off chip LPC
endpoints, like external flash modules.
The most important units of this OPB are :
- OPB Master: contains the ADU slave logic, a set of internal
registers and the logic to control the OPB.
- LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of
internal registers and the LPC HOST Controller to control the LPC
interface.
Four address spaces are provided to the ADU :
- LPC Bus Firmware Memory
- LPC Bus Memory
- LPC Bus I/O (ISA bus)
- and the registers for the OPB Master and the LPC Host Controller
On POWER8, an intermediate hop is necessary to reach the OPB, through
a unit called the ECCB. OPB commands are simply mangled in ECCB write
commands.
On POWER9, the OPB master address space can be accessed via MMIO. The
logic is same but the code will be simpler as the XSCOM and ECCB hops
are not necessary anymore.
This version of the LPC controller model doesn't yet implement support
for the SerIRQ deserializer present in the Naples version of the chip
though some preliminary work is there.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- ported on latest PowerNV patchset
- changed the XSCOM interface to fit new model
- QOMified the model
- moved the ISA hunks in another patch
- removed printf logging
- added a couple of UNIMP logging
- rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we are using real HW ids for the cores in PowerNV chips, we
can route the XSCOM accesses to them. We just need to attach a
specific XSCOM memory region to each core in the appropriate window
for the core number.
To start with, let's install the DTS (Digital Thermal Sensor) handlers
which should return 38°C for each core.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves
as a backbone to connect different units of the system. The host
firmware connects to the PIB through a bridge unit, the
Alter-Display-Unit (ADU), which gives him access to all the chiplets
on the PCB network (Pervasive Connect Bus), the PIB acting as the root
of this network.
XSCOM (serial communication) is the interface to the sideband bus
provided by the POWER8 pervasive unit to read and write to chiplets
resources. This is needed by the host firmware, OPAL and to a lesser
extent, Linux. This is among others how the PCI Host bridges get
configured at boot or how the LPC bus is accessed.
To represent the ADU of a real system, we introduce a specific
AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The
translation of an XSCOM address into a PCB register address is
slightly different between the P9 and the P8. This is handled before
the dispatch using a 8byte alignment for all.
To customize the device tree, a QOM InterfaceClass, PnvXScomInterface,
is provided with a populate() handler. The chip populates the device
tree by simply looping on its children. Therefore, each model needing
custom nodes should not forget to declare itself as a child at
instantiation time.
Based on previous work done by :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Added cpu parameter to xscom_complete()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is largy inspired by sPAPRCPUCore with some simplification, no
hotplug for instance. A set of PnvCore objects is added to the PnvChip
and the device tree is populated looping on these cores.
Real HW cpu ids are now generated depending on the chip cpu model, the
chip id and a core mask. The id is propagated to the CPU object, using
properties, to set the SPR_PIR (Processor Identification Register)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Identification Register (PIR) is a register that holds a
processor identifier which is used for bus transactions (XSCOM) and
for processor differentiation in multiprocessor systems. It also used
in the interrupt vector entries (IVE) to identify the thread serving
the interrupts.
P9 and P8 have some differences in the CPU PIR encoding.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be used to build real HW ids for the cores and enforce some
limits on the available cores per chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is is an abstraction of a POWER8 chip which is a set of cores
plus other 'units', like the pervasive unit, the interrupt controller,
the memory controller, the on-chip microcontroller, etc. The whole can
be seen as a socket. It depends on a cpu model and its characteristics:
max cores and specific inits are defined in a PnvChipClass.
We start with an near empty PnvChip with only a few cpu constants
which we will grow in the subsequent patches with the controllers
required to run the system.
The Chip CFAM (Common FRU Access Module) ID gives the model of the
chip and its version number. It is generally the first thing firmwares
fetch, available at XSCOM PCB address 0xf000f, to start initialization.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to emulate a PowerNV system at the level of the skiboot
firmware, which loads the OS and provides some runtime services. Power
Systems have a lower firmware (HostBoot) that does low level system
initialization, like DRAM training. This is beyond the scope of what
qemu will address in a PowerNV guest.
No devices yet, not even an interrupt controller. Just to get started,
some RAM to load the skiboot firmware, the kernel and initrd. The
device tree is fully created in the machine reset op.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- replaced fprintf by error_report
- used a common definition of _FDT macro
- removed VMStateDescription as migration is not yet supported
- added IBM Copyright statements
- reworked kernel_filename handling
- merged PnvSystem and sPowerNVMachineState
- removed PHANDLE_XICP
- added ppc_create_page_sizes_prop helper
- removed nmi support
- removed kvm support
- updated powernv machine to version 2.8
- removed chips and cpus, They will be provided in another patches
- added a machine reset routine to initialize the device tree (also)
- french has a squelette and english a skeleton.
- improved commit log.
- reworked prototypes parameters
- added a check on the ram size (thanks to Michael Ellerman)
- fixed chip-id cell
- changed MAX_CPUS to 2048
- simplified memory node creation to one node only
- removed machine version
- rewrote the device tree creation with the fdt "rw" routines
- s/sPowerNVMachineState/PnvMachineState/
- etc.]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original QOMification of the spapr VIO devices in 3954d33 "spapr:
convert to QEMU Object Model (v2)" moved some callbacks from the
VIOsPAPRBus structure to the VIOsPAPRDeviceClass. Except, that it
forgot to actually remove them from the VIOsPAPRBus structure (which
still exists, though it doesn't fulfill quite the same function as it
did pre-QOM).
This patch removes those now unused callback fields.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The routines :
void icp_set_cppr(ICPState *icp, uint8_t cppr);
void icp_set_mfrr(ICPState *icp, uint8_t mfrr);
void icp_eoi(ICPState *icp, uint32_t xirr);
now use one 'ICPState *icp' argument instead of a 'XICSState *' and a
server arguments. The backlink on XICSState* is used whenever needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The link will be used to change the API of the icp_* routines which
are still using an XICSState as an argument.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_spapr and xics_kvm nearly define the same 'set_nr_servers'
handler. Only the type of the ICP differs. So let's make a common one
to remove some duplicated code.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The header now only contains inline functions related to the
Sun NVRAM, so the a name like sun_nvram.h seems to be more
appropriate now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Everything that is related to CHRP NVRAM should rather reside in
chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "system partition" and "free space" partition layouts are
defined by the CHRP and LoPAPR specification, and used by
OpenBIOS and SLOF. We can re-use this code for other machines
that use OpenBIOS and SLOF, too. So let's make this code independent
from the MAC NVRAM environment and put it into two proper helper
functions.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hard-coded default alignment is BDRV_SECTOR_SIZE, however this is not
necessarily the case for all platforms. Use this as the default alignment for
all current callers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1476445266-27503-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
This allows drivers to implement ioctls in a coroutine-based way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All read/write functions already have a single coroutine-based function
on the BlockBackend level through which all requests go (no matter what
API style the external caller used) and which passes the requests down
to the block node level.
This patch exports a bdrv_co_ioctl() function and uses it to extend this
mode of operation to ioctls.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Ensure that all I/O channels created for character devices
are given names to distinguish their respective roles.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The GSource object has ability to have a name, which is useful
when debugging performance problems with the mainloop event
callbacks that take too long. By associating a name with a
QIOChannel object, we can then set the name on any GSource
associated with the channel.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Testing QIOChannel feature support can be done with a helper called
qio_channel_has_feature(). Setting feature support, however, was
done manually with a logical OR. This patch introduces a new helper
called qio_channel_set_feature() and makes use of it where applicable.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When QIOChannels were introduced in 666a3af9, the feature bits were
already defined shifted. However, when using them, the code was shifting
them again. The incorrect use was consistent until 74b6ce43, where
QIO_CHANNEL_FEATURE_LISTEN was defined shifted but tested unshifted.
This patch changes the definition to be unshifted and fixes the
incorrect usage introduced on 74b6ce43.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Force the use of cmpxchg16b on x86_64.
Wikipedia suggests that only very old AMD64 (circa 2004) did not have
this instruction. Further, it's required by Windows 8 so no new cpus
will ever omit it.
If we truely care about these, then we could check this at startup time
and then avoid executing paths that use it.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allows Int128 to be used more generally, rather than having to
begin with 64-bit inputs and accumulate.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While the check against sizeof(void *) is appropriate for
normal usage within qemu, there are places in which we want
wider operaions and have checked for their existance.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This paves the way for upcoming work.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-9-git-send-email-cota@braap.org>
This paves the way for upcoming work.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-8-git-send-email-cota@braap.org>
Making these functional rather than object macros will
prevent later problems with complex macro expansion.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The qdict_flatten() method will take a dict whose elements are
further nested dicts/lists and flatten them by concatenating
keys.
The qdict_crumple() method aims to do the reverse, taking a flat
qdict, and turning it into a set of nested dicts/lists. It will
apply nesting based on the key name, with a '.' indicating a
new level in the hierarchy. If the keys in the nested structure
are all numeric, it will create a list, otherwise it will create
a dict.
If the keys are a mixture of numeric and non-numeric, or the
numeric keys are not in strictly ascending order, an error will
be reported.
As an example, a flat dict containing
{
'foo.0.bar': 'one',
'foo.0.wizz': '1',
'foo.1.bar': 'two',
'foo.1.wizz': '2'
}
will get turned into a dict with one element 'foo' whose
value is a list. The list elements will each in turn be
dicts.
{
'foo': [
{ 'bar': 'one', 'wizz': '1' },
{ 'bar': 'two', 'wizz': '2' }
],
}
If the key is intended to contain a literal '.', then it must
be escaped as '..'. ie a flat dict
{
'foo..bar': 'wizz',
'bar.foo..bar': 'eek',
'bar.hello': 'world'
}
Will end up as
{
'foo.bar': 'wizz',
'bar': {
'foo.bar': 'eek',
'hello': 'world'
}
}
The intent of this function is that it allows a set of QemuOpts
to be turned into a nested data structure that mirrors the nesting
used when the same object is defined over QMP.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-3-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Parameter recursive dropped along with its tests; whitespace style
touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QmpOutputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one wants a QObject. Rename it
to better reflect its functionality as a generic QAPI
to QObject converter.
The commit before previous renamed the files, this one renames C
identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file rename and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QmpInputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one has a QObject. Rename it
to better reflect its functionality as a generic QObject
to QAPI converter.
The previous commit renamed the files, this one renames C identifiers.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Straightforwardly rebased, split into file and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.
This is the first of three parts: rename the files. The next two
parts will rename C identifiers. The split is necessary to make git
rename detection work.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
-----BEGIN PGP SIGNATURE-----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=T2kg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and CPU queue, 2016-10-24
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
# gpg: Signature made Mon 24 Oct 2016 20:51:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
exec: call cpu_exec_exit() from a CPU unrealize common function
exec: move cpu_exec_init() calls to realize functions
exec: split cpu_exec_init()
pc: q35: Bump max_cpus to 288
pc: Require IRQ remapping and EIM if there could be x2APIC CPUs
pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Increase MAX_CPUMASK_BITS from 255 to 288
pc: Clarify FW_CFG_MAX_CPUS usage comment
pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode
pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode
pc: apic_common: Restore APIC ID to initial ID on reset
pc: apic_common: Extend APIC ID property to 32bit
pc: Leave max apic_id_limit only in legacy cpu hotplug code
acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
pc: acpi: x2APIC support for SRAT table
pc: acpi: x2APIC support for MADT table and _MAT method
Conflicts:
target-arm/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As cpu_exec_exit() mirrors the cpu_exec_realizefn(),
rename it as cpu_exec_unrealizefn().
Create and register a cpu_common_unrealizefn() function for
the CPU device class and call cpu_exec_unrealizefn() from
this function.
Remove cpu_exec_exit() from cpu_common_finalize()
(which mirrors init, not realize), and as x86_cpu_unrealizefn()
and ppc_cpu_unrealizefn() overwrite the device class unrealize function,
add a call to a parent_unrealize pointer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Modify all CPUs to call it from XXX_cpu_realizefn() function.
Remove all the cannot_destroy_with_object_finalize_yet as
unsafe references have been moved to cpu_exec_realizefn().
(tested with QOM command provided by commit 4c315c27)
for arm:
Setting of cpu->mp_affinity is moved from arm_cpu_initfn()
to arm_cpu_realizefn() as setting of cpu_index is now done
in cpu_exec_realizefn(). To avoid to overwrite an user defined
value, we set it to an invalid value by default, and update
it in realize function only if the value is still invalid.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Put in cpu_exec_initfn() what initializes the CPU,
and leave in cpu_exec_init() what adds it to the environment.
As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it
directly in cpu_common_initfn().
cpu_exec_init() is now a realize function, it will be renamed
to cpu_exec_realizefn() and moved to the XX_cpu_realizefn()
function in a following patch.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently firmware uses 1 byte at 0x5F offset in RTC CMOS
to get number of CPUs present at boot. However 1 byte is
not enough to handle more than 255 CPUs. So add a new
fw_cfg file that would allow QEMU to tell it.
For compat reasons add file only for machine types that
support more than 255 CPUs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ACPI ID is 32 bit wide on CPUs with x2APIC support.
Extend 'id' property to support it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Callers can create an iterator of meta bitmap with
bdrv_dirty_meta_iter_new(), then use the bdrv_dirty_iter_* operations on
it. Meta iterators are also counted by bitmap->active_iterators.
Also add a couple of functions to retrieve granularity and count.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-11-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Several functions to provide necessary access to BdrvDirtyBitmap for
block-migration.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Add the "finish" parameters. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-9-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Functions to serialize / deserialize(restore) HBitmap. HBitmap should be
saved to linear sequence of bits independently of endianness and bitmap
array element (unsigned long) size. Therefore Little Endian is chosen.
These functions are appropriate for dirty bitmap migration, restoring
the bitmap in several steps is available. To save performance, every
step writes only the last level of the bitmap. All other levels are
restored by hbitmap_deserialize_finish() as a last step of restoring.
So, HBitmap is inconsistent while restoring.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Fix left shift operand to 1UL; add "finish" parameter. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-8-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For dirty bitmap users to get the size and the name of a
BdrvDirtyBitmap.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-6-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The added group of operations enables tracking of the changed bits in
the dirty bitmap.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-5-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Upon each bit toggle, the corresponding bit in the meta bitmap will be
set.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Amended text inline. --js]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-3-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
HBitmap is an implementation detail of block dirty bitmap that should be hidden
from users. Introduce a BdrvDirtyBitmapIter to encapsulate the underlying
HBitmapIter.
A small difference in the interface is, before, an HBitmapIter is initialized
in place, now the new BdrvDirtyBitmapIter must be dynamically allocated because
the structure definition is in block/dirty-bitmap.c.
Two current users are converted too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1476395910-8697-2-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
ACPI Spec 6.0 introduces IO Remapping Table Structure. This patch
introduces the definitions required to describe the IO relationship
between the PCIe root complex and the ITS.
This conforms to:
"IO Remapping Table System Software on ARM Platforms",
Document number: ARM DEN 0049B, October 2015.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1476707466-14300-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current ARM MPTimer implementation uses QEMUTimer for the actual timer,
this implementation isn't complete and mostly tries to duplicate of what
generic ptimer is already doing fine.
Conversion to ptimer brings the following benefits and fixes:
- Simple timer pausing implementation
- Fixes counter value preservation after stopping the timer
- Properly handles prescaler != 0 / counter = 0 / load = 0 cases
- Code simplification and reduction
Bump VMSD to version 3, since VMState is changed and is not compatible
with the previous implementation.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 37f378c33bb5a28d5cd71167a6bd5bff5e59cbc3.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For most of the timers counter starts to decrement after first period
expires. Due to rounding down performed by the ptimer_get_count, it returns
counter - 1 for the running timer, so that for the ptimer user it looks
like counter gets decremented immediately after running the timer. Add "no
counter round down" policy that provides correct behaviour for those timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: ef39622d0ebfdc32a0877e59ffdf6910dc3db688.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Immediate counter re-load on setting (or on starting to run with)
counter = 0 is a wrong behaviour for some of the timers. Add "no
immediate reload" policy that provides correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: bf9385cd2550ca451d564fa46007688cee3f3d9d.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Performing trigger on setting (or starting to run with) counter = 0 could
be a wrong behaviour for some of the timers, provide "no immediate trigger"
policy to maintain correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 72c0319cf2ec599f22397b7da280c06c34dc40dd.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic timer that has load = delta = 0 performs trigger
on timer reload and stops, printing a "period zero" error message.
Introduce new policy that makes periodic timer to continuously trigger
with a period interval in case of load = 0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 632b23dd11055d9bd5e338d66b38fac0bd51462e.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic counter wraps around immediately once counter reaches
"0", this is wrong behaviour for some of the timers, resulting in one period
being lost. Add new ptimer policy that provides correct behaviour for such
timers, so that counter stays with "0" for a one period before wrapping
around.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: f22a670cf1f4be298b31640cb5f4be1df0f20ab6.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support target CPUs having a page size which isn't knownn
at compile time. To use this, the CPU implementation should:
* define TARGET_PAGE_BITS_VARY
* not define TARGET_PAGE_BITS
* define TARGET_PAGE_BITS_MIN to the smallest value it
might possibly want for TARGET_PAGE_BITS
* call set_preferred_target_page_bits() in its realize
function to indicate the actual preferred target page
size for the CPU (and report any error from it)
In CONFIG_USER_ONLY, the CPU implementation should continue
to define TARGET_PAGE_BITS appropriately for the guest
OS page size.
Machines which want to take advantage of having the page
size something larger than TARGET_PAGE_BITS_MIN must
set the MachineClass minimum_page_bits field to a value
which they guarantee will be no greater than the preferred
page size for any CPU they create.
Note that changing the target page size by setting
minimum_page_bits is a migration compatibility break
for that machine.
For debugging purposes, attempts to use TARGET_PAGE_SIZE
before it has been finally confirmed will assert.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
It's only used in qmp_chardev_add(), so use a create() argument instead.
Also switched to typedef functions for CharDriverParse/CharDriverCreate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to count the users of a CharDriverState, it can rely on the fact
of whether there is a CharBackend associated or if there is enough space
in the muxer.
Simplify and fold chr_mux_new_fe() in qemu_chr_fe_init() since there is
a single user now. Also switch from fprintf to raising error instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I introduced this function in d61b0c9a2f, but it isn't
used. Furthermore, it was incomplete, as it would need to translate QEMU
chr events to Spice port events.
(presumably it was used in the follow-up NBD-spice series that was not
completed: http://lists.gnu.org/archive/html/qemu-devel/2013-11/msg02024.html)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This may help to catch unhandled cases, and avoid having to maintain
numbering.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Usage has long been removed, since commit f220174de8.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fe_open state belongs to front end.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is used to free the backend opaque pointer, let's name it
accordingly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-23-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the hanlders are associated with a CharBackend, rather than the
CharDriverState, it is more appropriate to store in CharBackend. This
avoids the handler copy dance in qemu_chr_fe_set_handlers() then
mux_chr_update_read_handler(), by storing the CharBackend pointer
directly.
Also a mux CharDriver should go through mux->backends[focused], since
chr->be will stay NULL. Before that, it was possible to call
chr->handler by mistake with surprising results, for ex through
qemu_chr_be_can_write(), which would result in calling the last set
handler front end, not the one with focus.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In most cases, front ends do not care about the side effect of
CharBackend, so we can simply skip the checks and call the qemu_chr_fe
functions even without associated CharDriver.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_add_handlers*() have been removed in previous change, so the
common qemu_chr_set_handlers() is no longer needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-17-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new structure is meant to keep the details associated with a char
driver usage. On initialization, it gets a tag from the mux backend.
It can change its handlers thanks to qemu_chr_fe_set_handlers().
This structure is introduced so that all frontend will be moved to hold
and use a CharBackend. This will allow to better track char usage and
allocation, and help prevent some memory leaks or corruption.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-10-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make qemu_chr_add_handlers_full() aware of mux handling. This allows
introduction of a tag associated with the fe handlers and a
qemu_chr_set_handlers() function to set the handler for a particular
tag. That will allow to get rid of qemu_chr_add_handlers*() in later
changes, in favor of qemu_chr_fe_set_handler().
To this end, chr_update_read_handler callback is enhanced with a tag
argument, and mux_chr_update_read_handler() is splitted in new
functions: mux_chr_new_handler_tag(), mux_chr_set_handlers(),
mux_set_focus().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit b6607a1a20, serial_hds_isa_init() was introduced to
factor out serial_isa_init() loops. However, sun4uv shouldn't start from
0 when there is a mm serial on 0 already. Add a "from" argument to
serial_hds_isa_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This speeds up MEMORY_LISTENER_CALL noticeably. Right now,
with many PCI devices you have N regions added to M AddressSpaces
(M = # PCI devices with bus-master enabled) and each call looks
up the whole listener list, with at least M listeners in it.
Because most of the regions in N are BARs, which are also roughly
proportional to M, the whole thing is O(M^3). This changes it
to O(M^2), which is the best we can do without rewriting the
whole thing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces load-acquire and store-release operations in QEMU.
For now, just use them as an implementation detail of atomic_mb_read
and atomic_mb_set.
Since docs/atomics.txt documents that atomic_mb_read only synchronizes
with an atomic_mb_set of the same variable, we can use the new implementation
everywhere instead of seq-cst loads and stores.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce CTR mode support for the cipher APIs.
CTR mode uses a counter rather than a traditional IV.
The counter has additional properties, including a nonce
and initial counter block. We reuse the ctx->iv as
the counter for conveniences.
Both libgcrypt and nettle are support CTR mode, the
cipher-builtin doesn't support yet.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It can't guarantee all cipher modes are supported
if one cipher algorithm is supported by a backend.
Let's extend qcrypto_cipher_supports() to take both
the algorithm and mode as parameters.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We should avoid exposing new hardware (through DT and ACPI) on older
machine types. This patch keeps 2.7 and older from changing, despite
the introduction of ITS support for 2.8.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1476117341-32690-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controllers on the Aspeed AST2500 SoC are very similar to the
ones found on the AST2400. The differences are on the number of
supported flash modules and their default mappings in the SoC address
space.
The Aspeed AST2500 has one SPI controller for the BMC firmware and two
for the host firmware. All controllers have now the same set of
registers compatible with the AST2400 FMC controller and the legacy
'SMC' controller is fully gone.
We keep the FMC object to act as the BMC SPI controller and add a new
SPI controller for the host. We also have to introduce new type names
to handle the differences in the flash modules memory mappping.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2500 SoC has two. Let's prepare ground for the next changes
which will add the required definitions for the second host SPI
controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will ease the definition of the new controllers for the AST2500
SoC and also ease the support of the segment registers, which provide
a way to reconfigure the mapping window of each slave.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
