The renderer will always use the sRGB colorspace for drawing, and will default to the sRGB output colorspace. If you want blending in linear space and HDR support, you can select the scRGB output colorspace, which is supported by the direct3d11 and direct3d12
These originally checked for expected ± EPSILON as logged, but since
commit 880c6939 they check for expected ± max_err, where max_err may
need to be greater than EPSILON for very large expected results like
the ones in exp_regularCases().
Also, EPSILON is so small that the default precision of the %f format
(6 decimal places) would never actually have shown its effect, so log
it in scientific notation instead.
Fixes: 880c6939 "testautomation_math: do relative comparison + more precise correct trigonometric values"
Signed-off-by: Simon McVittie <smcv@collabora.com>
While looking at the other tests in this file, I noticed that instead
of checking for a result in the range of expected ± FLT_EPSILON as I
would have expected, these tests would accept any result strictly less
than expected + FLT_EPSILON, for example a wrong result that is very
large and negative. This is presumably not what was intended, so add
the SDL_fabs() that I assume was meant to be here.
Fixes: 474c8d00 "testautomation: don't do float equality tests"
Signed-off-by: Simon McVittie <smcv@collabora.com>
If the magnitude of the expected result is small, then we can safely
assume that the actual calculated result matches it to 10 decimal
places.
However, if the magnitude is very large, as it is for some of our exp()
tests, then 10 decimal places represents an unrealistically high level
of precision, for example 24 decimal digits for the test that is
expected to return approximately 6.6e14. IEEE 754 floating point only
has a precision of about 16 decimal digits, causing test failure on
x86 compilers that use an i387 80-bit extended-precision register for
the result and therefore get a slightly different answer.
To avoid this, scale the required precision with the magnitude of the
expected result, so that we accept a maximum error of either 10 decimal
places or 1 part in 1e10, whichever is greater.
[smcv: Added longer commit message explaining why we need this]
(cherry picked from commit 880c69392a)
In the Steam Runtime 1 'scout' environment, when compiling for i386
using the default gcc-4.6, Exp(34.125) matches the desired value to the
precision shown in the log (6 decimal places) but is not an exact match
for the desired value.
Signed-off-by: Simon McVittie <smcv@collabora.com>
You can't do blending directly in PQ space, which means you have to create a scene render target in linear space and use shaders to convert PQ texture data to linear, etc. All of this is out of scope for the SDL 2D renderer at the moment.
This allows color operations to happen in linear space between sRGB input and sRGB output. This is currently supported on the direct3d11, direct3d12 and opengl renderers.
This is a good resource on blending in linear space vs sRGB space:
https://blog.johnnovak.net/2016/09/21/what-every-coder-should-know-about-gamma/
Also added testcolorspace to verify colorspace changes
The usable fullscreen bounds need to be queried after window creation, as Wayland can send different usable bounds depending on the focused window's scaling mode.
The drawing uses the origin of the viewport as the coordinate origin, so we only need to clip against the size of the viewport.
Also added a unit test to catch this case in the future
These functions historically didn't set the error indicator on overflow.
Before commit 447b508a "error: SDL's allocators now call SDL_OutOfMemory
on error", their callers would call SDL_OutOfMemory() instead, which was
assumed to be close enough in meaning: "that's a silly amount of memory
that would overflow size_t" is similar to "that's more memory than
is available". Now that responsibility for calling SDL_OutOfMemory()
has been pushed down into SDL_calloc() and friends, the functions that
check for overflows might as well set more specific errors.
Signed-off-by: Simon McVittie <smcv@collabora.com>
A surface of width (0x7fff'ffff) / 2 = 0x3fff'ffff is not quite large
enough to make the pitch overflow in the way we wanted to test here:
with a 32-bit format, that makes each row 0xffff'fffc bytes, which
(just) fits in a 32-bit unsigned size_t. Increasing it to 0x4000'0000
pixels per row is enough to trigger the overflow we intended to test.
In SDL 2, this test bug was hidden by the fact that allocating
0xffff'fffc bytes on a 32-bit platform is very likely to fail, and SDL 2
reported both "malloc() failed" and "this amount of memory is too large
for a size_t" with the same error code.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Adding 3 bytes of alignment to 0x7fff'ffff is not enough to make it
overflow a 4-byte unsigned size_t, so this test was not exercising
the intended failure mode. We cannot actually make this overflow
with a signed 32-bit width and an 8-bit format: the maximum width is
not enough to achieve that. However, if we switch to a 24-bit format,
we can make the calculation overflow.
In SDL 2, this test bug was hidden by the fact that allocating
0x7fff'ffff bytes on a 32-bit platform will usually fail, and SDL 2
reported both "malloc() failed" and "this amount of memory is too large
for a size_t" with the same error code.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Add the ability to import and wrap external surfaces from external toolkits such as Qt and GTK.
Wayland surfaces and windows are more intrinsically tied to the client library than other windowing systems, so it is necessary to provide a way to initialize SDL with an existing wl_display object, which needs to be set prior to video system initialization, or export the internal SDL wl_display object for use by external applications or toolkits. For this, the global property SDL_PROPERTY_GLOBAL_VIDEO_WAYLAND_WL_DISPLAY_POINTER is used.
A Wayland example was added to testnative, and a basic example of Qt 6 interoperation is provided in the Wayland readme to demonstrate the use of external windows with both SDL owning the wl_display, and an external toolkit owning it.
Allow for the creation of SDL windows with a roleless surface that applications can use for their own purposes, such as with a windowing protocol other than XDG toplevel.
The property `wayland.surface_role_custom` will create a window with a surface that SDL can render to and handles input for, but is not associated with a toplevel window, so applications can use it for their own, custom purposes (e.g. wlr_layer_shell).
A test/minimal example is included in tests/testwaylandcustom.c
When a test has been disabled because it's known not to work reliably
or it's a test for unimplemented functionality, we probably don't want
to encourage developers and testers to run it and report its failures
as a bug.
Helps: #8798, #8800
Signed-off-by: Simon McVittie <smcv@collabora.com>
Added support for getting the real controller info, as well as the function SDL_GetGamepadSteamHandle() to get the Steam Input API handle, from the virtual gamepads provided by Steam.
Also added an event SDL_EVENT_GAMEPAD_STEAM_HANDLE_UPDATED which is triggered when a controller's API handle changes, e.g. the controllers were reassigned slots in the Steam UI.
Track and check move and resize requests separately, and consider them done if either the window is already at the expected location, or at least one configure event which moved or resized the window was processed. The avoids a timeout condition if resizing the window caused it to be implicitly moved in order to keep it within desktop bounds.
The automated positioning test now runs on GNOME/X11 without any sync requests timing out.
SDL window size, state, and position functions have been considered immediate, with their effects assuming to have taken effect upon successful return of the function. However, several windowing systems handle these requests asynchronously, resulting in the functions blocking until the changes have taken effect, potentially for long periods of time. Additionally, some windowing systems treat these as requests, and can potentially deny or fulfill the request in a manner differently than the application expects, such as not allowing a window to be positioned or sized beyond desktop borders, prohibiting fullscreen, and so on.
With these changes, applications can make requests of the window manager that do not block, with the understanding that an associated event will be sent if the request is fulfilled. Currently, size, position, maximize, minimize, and fullscreen calls are handled as asynchronous requests, with events being returned if the request is honored. If the application requires that the change take effect immediately, it can call the new SDL_SyncWindow function, which will attempt to block until the request is fulfilled, or some arbitrary timeout period elapses, the duration of which depends not only on the windowing system, but on the operation requested as well (e.g. a 100ms timeout is fine for most X11 events, but maximizing a window can take considerably longer for some reason). There is also a new hint 'SDL_VIDEO_SYNC_ALL_WINDOW_OPS' that will mimic the old behavior by synchronizing after every window operation with, again, the understanding that using this may result in the associated calls blocking for a relatively long period.
The deferred model also results in the window size and position getters not reporting false coordinates anymore, as they only forward what the window manager reports vs allowing applications to set arbitrary values, and fullscreen enter/leave events that were initiated via the window manager update the window state appropriately, where they didn't before.
Care was taken to ensure that order of operations is maintained, and that requests are not ignored or dropped. This does require some implicit internal synchronization in the various backends if many requests are made in a short period, as some state and behavior depends on other bits of state that need to be known at that particular point in time, but this isn't something that typical applications will hit, unless they are sending a lot of window state in a short time as the tests do.
The automated tests developed to test the previous behavior also resulted in previously undefined behavior being defined and normalized across platforms, particularly when it comes to the sizing and positioning of windows when they are in a fixed-size state, such as maximized or fullscreen. Size and position requests made when the window is not in a movable or resizable state will be deferred until it can be applied, so no requests are lost. These changes fix another long-standing issue with renderers recreating maximized windows, where the original non-maximized size was lost, resulting in the window being restored to the wrong size. All automated video tests pass across all platforms.
Overall, the "make a request/get an event" model better reflects how most windowing systems work, and some backends avoid spending significant time blocking while waiting for operations to complete.
This means the allocator's caller doesn't need to use SDL_OutOfMemory directly
if the allocation fails.
This applies to the usual allocators: SDL_malloc, SDL_calloc, SDL_realloc
(all of these regardless of if the app supplied a custom allocator or we're
using system malloc() or an internal copy of dlmalloc under the hood),
SDL_aligned_alloc, SDL_small_alloc, SDL_strdup, SDL_asprintf, SDL_wcsdup...
probably others. If it returns something you can pass to SDL_free, it should
work.
The caller might still need to use SDL_OutOfMemory if something that wasn't
SDL allocated the memory: operator new in C++ code, Objective-C's alloc
message, win32 GlobalAlloc, etc.
Fixes#8642.
The included ones need to wait until SDL_Init has run, or you'll get an empty
list, and we might also be adding more from an external gamecontrollerdb.txt
file, too.
Don't do it in POST_BUILD to avoid multiple parallel builds
stepping on each others toes.
Also don't use copy_if_different, but unconditionally copy it.
The build system should take care of dependencies.
Mesa and Nvidia handle it differently, and one or the other may fix their
implementation in the future, so test which way it works at runtime.
Reference Issue #8004.
* Moving forward and backward don't clear the current binding
* Use the tertiary face button to delete the current binding
* More small improvements to make navigation more intuitive
This patch adds an API for querying pressure-
sensitive pens, cf. SDL_pen.h:
- Enumerate all pens
- Get pen capabilities, names, GUIDs
- Distinguishes pens and erasers
- Distinguish attached and detached pens
- Pressure and tilt support
- Rotation, distance, throttle wheel support
(throttle wheel untested)
- Pen type and meta-information reporting
(partially tested)
Pen event reporting:
- Three new event structures: PenTip, PenMotion, and
PenButton
- Report location with sub-pixel precision
- Include axis and button status, is-eraser flag
Internal pen tracker, intended to be independent
of platform APIs, cf. SDL_pen_c.h:
- Track known pens
- Handle pen hotplugging
Automatic test:
- testautomation_pen.c
Other features:
- XInput2 implementation, incl. hotplugging
- Wayland implementation, incl. hotplugging
- Backward compatibility: pen events default to
emulating pens with mouse ID SDL_PEN_MOUSEID
- Can be toggled via SDL_HINT_PEN_NOT_MOUSE
- Test/demo program (testpen)
- Wacom pen feature identification by pen ID
Acknowledgements:
- Ping Cheng (Wacom) provided extensive feedback
on Wacom pen features and detection so that
hopefully untested Wacom devices have a
realistic chance of working out of the box.
Sam Lantinga