performance of the ne2K driver in win9x."
- receive timer set to 10000 instructions instead of 1000000.
- placed if (WaitForSingleObject(lpAdapter->ReadEvent,0) == WAIT_OBJECT_0) {}
around the read code.
> This is the bug fix to make the reset button work properly when the cpu
> is in the halt state. There is another patch in init.cc as well to clear
> async_event. If you don't do this, if a cpu goes into HLT, the only thing
> which will fix it is another interrupt. The reset button won't work.
a consistent way of accessing these flags that works both inside and
outside the BX_CPU class, I added inline accessor methods for each
flag: assert_FLAG(), clear_FLAG(), set_FLAG(value), and get_FLAG ()
that returns its value. I use assert to mean "set the value to one"
to avoid confusion, since there's also a set method that takes a value.
- the eflags access macros (e.g. GetEFlagsDFLogical, ClearEFlagsTF) are
now defined in terms of the inline accessors. In most cases it will
result in the same code anyway. The major advantage of the accesors
is that they can be used from inside or outside the BX_CPU object, while
the macros can only be used from inside.
- since almost all eflags were stored in val32 now, I went ahead and
removed the if_, rf, and vm fields. Now the val32 bit is the
"official" value for these flags, and they have accessors just like
everything else.
- init.cc: move the registration of registers until after they have been
initialized so that the initial value of each parameter is correct.
Modified files:
debug/dbg_main.cc cpu/cpu.h cpu/debugstuff.cc cpu/flag_ctrl.cc
cpu/flag_ctrl_pro.cc cpu/init.cc
length. (The first guinea pig is the 2-bit IOPL field in eflags.)
Also it can have a pointer to a Bit8u, Bit16u, Bit32u and signed
equivalents and do the right thing.
- add lots more CPU fields as parameters: EBP ESI EDI ESP, all segment regs,
LDTR, GDTR, eflags, DR*, TR*, CR*. These are all visible on a
ridiculously tall dialog box that will one day become the debugger.
wxWindows thread. However, when the wxWindows thread calls
Bochs code, for example SIM->some_action() that triggers a
BX_PANIC(), then the Sim2CI event is created in the wxWindows
thread. This used to cause thread deadlock, but now it is
recognized and handled safely.
You need to use '--enable-global-pages' to configure in support.
If you have something to boot that uses them, give them a
spin. Really the were introduced for PPro and above, but
I haven't put in any limits. CPUID and CR4 report the proper
bits when configured, regardless of --enable-cpu-level at the
moment.
if off, we were still reading CR3 from the TSS and reloading
it! This was causing problems with a DOS extender. When
paging is turned back on, CR3 would be incorrect.
with GCC) align them with the GCC special alignment attribute.
Since there was then one available field, I split the protection
attributes and native host pointers into their own fields.
Before, with 3 dwords per TLB entry, some entries (about 3/8)
were spanning two processor cache lines (assuming a 32-byte
cache line). Now, they all fit within one cache line.
Knocked about 1.4% off Win95 boot time, probably more off normal
software runs.
BX_READ not 0. BX_READ was 10. While I was at it, I did
change BX_{READ,WRITE,RW} to {0,1,2} rather than {10,11,12}
in case that helps optimize code.
There may be more paging checks we should do before changing
any state, to avoid receiving a page fault in the middle.
I put some extra comments in there.
to request bulk IO operations to IO devices which are bulk IO aware.
Currently, I modified only harddrv.cc to be aware. I added some
fields to the bx_devices_c class for the IO instructions to
place requests and receive responses from the IO device emulation.
Devices except the hard drive, don't monitor these fields so they
respond as normal. The hard drive now monitors these fields for
bulk requests, and if enabled, it memcpy()'s data straight from
the disk buffer to memory. This eliminates numerous inp/outp calling
sequences per disk sector.
I used the fields in bx_devices_c so that I would not have to
disrupt most IO device modules. Enhancements can be made to
other devices if they use high-bandwidth IO via in/out instructions.
vga_charmap
- the SDL gui uses the charmap data for the vga text display
* TODO: implement this feature for other guis
- removed unused variables in sdl.cc and gui.cc
- fixed a warning in vga.cc
All the EFLAGS bits used to be cached in separate fields. I left
a few of them in separate fields for now - might remove them
at some point also. When the arithmetic fields are known
(ie they're not in lazy mode), they are all cached in a
32-bit EFLAGS image, just like the x86 EFLAGS register expects.
All other eflags are store in the 32-bit register also, with
a few also mirrored in separate fields for now.
The reason I did this, was so that on x86 hosts, asm() statements
can be #ifdef'd in to do the calculation and get the native
eflags results very cheaply. Just to test that it works, I
coded ADD_EdId() and ADD_EwIw() with some conditionally compiled
asm()s for accelerated eflags processing and it works.
-Kevin
it can decide how to proceed. Some of those bits are necessary
to make TLB invalidation decisions. INVLPG doesn't cause
a whole TLB flush anymore, just one page. Some of the
current CPU behaviours model the P6, especially on CR0
reloads. Earlier processors kept some pre-change pre-fetched
instructions until a branch. We could probably model that
by setting a flag, and letting the revalidate_prefetch_q
function cause serialization.
The TLB flush code only invalidates entries which are not
already invalidated for the case where the TLB invalidation
ID trick is not in use.
Read-Modify-Write instructions. The first read phase stores
the host pointer in the "pages" field if a direct use pointer
is available. The Write phase first checks if a pointer was
issued and uses it for a direct write if available.
I chose the "pages" field since it needs to be checked by the
write_RMW_virtual variants anyways and thus needs to be
cached anyways.
Mostly the mods where to access.cc, but I did also macro-ize
the calls to write_RMW_virtual...() in files which use it
and cpu.h. Right now, the macro is just a straight pass-through.
I tried expanding it to a quick initial check for the pointer
availability to do the write in-place, with a function call
as a fall-back. That didn't seemed to matter at all.
Booting is not helped by this really. The upper bound of
the gain is 5 or 6%, and that's only if you have a loop that
looks like:
label:
add [eax], ebx ;; mega read-modify-write instruction
jmp label ;; intensive loop.
Kevin Lawton says he doesn't get a performance benefit.
I'm not sure if I do. Either way, the difference isn't
very large.
This code may get removed if it turns out to be useless.
- modified files: config.h.in cpu/init.cc debug/dbg_main.cc gui/control.cc
gui/siminterface.cc gui/siminterface.h gui/wxdialog.cc gui/wxdialog.h
gui/wxmain.cc gui/wxmain.h iodev/keyboard.cc
----------------------------------------------------------------------
Patch name: patch.wx-show-cpu2
Author: Bryce Denney
Date: Fri Sep 6 12:13:28 EDT 2002
Description:
Second try at implementing the "Debug:Show Cpu" and "Debug:Show
Keyboard" dialog with values that change as the simulation proceeds.
(Nobody gets to see the first try.) This is the first step toward
making something resembling a wxWindows debugger.
First, variables which are going to be visible in the CI must be
registered as parameters. For some variables, it might be acceptable
to change them from Bit32u into bx_param_num_c and access them only
with set/get methods, but for most variables it would be a horrible
pain and wreck performance.
To deal with this, I introduced the concept of a shadow parameter. A
normal parameter has its value stored inside the struct, but a shadow
parameter has only a pointer to the value. Shadow params allow you to
treat any variable as if it was a parameter, without having to change
its type and access it using get/set methods. Of course, a shadow
param's value is controlled by someone else, so it can change at any
time.
To demonstrate and test the registration of shadow parameters, I
added code in cpu/init.cc to register a few CPU registers and
code in iodev/keyboard.cc to register a few keyboard state values.
Now these parameters are visible in the Debug:Show CPU and
Debug:Show Keyboard dialog boxes.
The Debug:Show* dialog boxes are created by the ParamDialog class,
which already understands how to display each type of parameter,
including the new shadow parameters (because they are just a subclass
of a normal parameter class). I have added a ParamDialog::Refresh()
method, which rereads the value from every parameter that it is
displaying and changes the displayed value. At the moment, in the
Debug:Show CPU dialog, changing the values has no effect. However
this is trivial to add when it's time (just call CommitChanges!). It
wouldn't really make sense to change the values unless you have paused
the simulation, for example when single stepping with the debugger.
The Refresh() method must be called periodically or else the dialog
will show the initial values forever. At the moment, Refresh() is
called when the simulator sends an async event called
BX_ASYNC_EVT_REFRESH, created by a call to SIM->refresh_ci ().
Details:
- implement shadow parameter class for Bit32s, called bx_shadow_num_c.
implement shadow parameter class for Boolean, called bx_shadow_bool_c.
more to follow (I need one for every type!)
- now the simulator thread can request that the config interface refresh
its display. For now, the refresh event causes the CI to check every
parameter it is watching and change the display value. Later, it may
be worth the trouble to keep track of which parameters have actually
changed. Code in the simulator thread calls SIM->refresh_ci(), which
creates an async event called BX_ASYNC_EVT_REFRESH and sends it to
the config interface. When it arrives in the wxWindows gui thread,
it calls RefreshDialogs(), which calls the Refresh() method on any
dialogs that might need it.
- in the debugger, SIM->refresh_ci() is called before every prompt
is printed. Otherwise, the refresh would wait until the next
SIM->periodic(), which might be thousands of cycles. This way,
when you're single stepping, the dialogs update with every step.
- To improve performance, the CI has a flag (MyFrame::WantRefresh())
which tells whether it has any need for refresh events. If no
dialogs are showing that need refresh events, then no event is sent
between threads.
- add a few defaults to the param classes that affect the settings of
newly created parameters. When declaring a lot of params with
similar settings it's more compact to set the default for new params
rather than to change each one separately. default_text_format is
the printf format string for displaying numbers. default_base is
the default base for displaying numbers (0, 16, 2, etc.)
- I added to ParamDialog to make it able to display modeless dialog
boxes such as "Debug:Show CPU". The new Refresh() method queries
all the parameters for their current value and changes the value in
the wxWindows control. The ParamDialog class still needs a little
work; for example, if it's modal it should have Cancel/Ok buttons,
but if it's going to be modeless it should maybe have Apply (commit
any changes) and Close.
- bx_gen_reg cannot be declared with BX_SMF or it can't read gen_reg
when static member functions are turned on.
- use "BX_CPU_C_PREFIX" instead of "BX_CPU_C::" for get_segment_base.
- the SMF (static member function) tricks are just plain wierd. The only way to
really be sure that you're not breaking something is to try compiling it with
SMF on and with SMF off. e.g. "configure && make" and
"configure --enable-processors=2 && make".
work (control-C kills process instead of returning to debugger prompt), give
a configure-time error if they are enabled together. If we can fix the
signal problem in readline, this check can be removed.
problems with control-C handling if you enable readline, because readline()
installs its own signal handlers every time you call it. I'm having
good luck with "--with-wx --enable-debugger --disable-readline" now.
