- it works only on x86 with gcc2.95+
- uses the GCC function atribute "regparm(n)" to declare that certain
functions use the register calling convention
- performance improvement is about 6%
1) fixed the type of "hostPageAddr" and associated typecasts.
2) fixed the type of "pages" and associated typecasts (overloaded variable)
3) patch to cpu.cc to calculate "eipPageBias" correctly in 64 bit mode
* renamed CPU_ID to BX_CPU_ID.
with this new name there is no possibility for name contentions and BX_CPU_ID
definition could be moved out to NEED_CPU_REG_SHORTCUTS block
* returned back `unsigned BX_CPU::which_cpu(void)` function
* added BX_CPU_ID parameter for
BX_INSTR_PHY_READ(a20addr, len);
BX_INSTR_PHY_WRITE(a20addr, len);
now it will be
BX_INSTR_PHY_READ(cpu_id, a20addr, len);
BX_INSTR_PHY_WRITE(cpu_id, a20addr, len);
- Now compiles for plain ia-32
- Fixed some printf formatting for ia32 only.
- Update to latest Win32 DLL
- Added an ICEBP (Undoc 0xF8, INT 01) facility.
- updated to use latest VGA refresh routine
"bx_bool" which is always defined as Bit32u on all platforms. In Carbon
specific code, Boolean is still used because the Carbon header files
define it to unsigned char.
- this fixes bug [ 623152 ] MacOSX: Triple Exception Booting win95.
The bug was that some code in Bochs depends on Boolean to be a
32 bit value. (This should be fixed, but I don't know all the places
where it needs to be fixed yet.) Because Carbon defined Boolean as
an unsigned char, Bochs just followed along and used the unsigned char
definition to avoid compile problems. This exposed the dependency
on 32 bit Boolean on MacOS X only and led to major simulation problems,
that could only be reproduced and debugged on that platform.
- On the mailing list we debated whether to make all Booleans into "bool" or
our own type. I chose bx_bool for several reasons.
1. Unlike C++'s bool, we can guarantee that bx_bool is the same size on all
platforms, which makes it much less likely to have more platform-specific
simulation differences in the future. (I spent hours on a borrowed
MacOSX machine chasing bug 618388 before discovering that different sized
Booleans were the problem, and I don't want to repeat that.)
2. We still have at least one dependency on 32 bit Booleans which must be
fixed some time, but I don't want to risk introducing new bugs into the
simulation just before the 2.0 release.
Modified Files:
bochs.h config.h.in gdbstub.cc logio.cc main.cc pc_system.cc
pc_system.h plugin.cc plugin.h bios/rombios.c cpu/apic.cc
cpu/arith16.cc cpu/arith32.cc cpu/arith64.cc cpu/arith8.cc
cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer16.cc cpu/ctrl_xfer32.cc
cpu/ctrl_xfer64.cc cpu/data_xfer16.cc cpu/data_xfer32.cc
cpu/data_xfer64.cc cpu/debugstuff.cc cpu/exception.cc
cpu/fetchdecode.cc cpu/flag_ctrl_pro.cc cpu/init.cc
cpu/io_pro.cc cpu/lazy_flags.cc cpu/lazy_flags.h cpu/mult16.cc
cpu/mult32.cc cpu/mult64.cc cpu/mult8.cc cpu/paging.cc
cpu/proc_ctrl.cc cpu/segment_ctrl_pro.cc cpu/stack_pro.cc
cpu/tasking.cc debug/dbg_main.cc debug/debug.h debug/sim2.cc
disasm/dis_decode.cc disasm/disasm.h doc/docbook/Makefile
docs-html/cosimulation.html fpu/wmFPUemu_glue.cc
gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/gui.cc gui/gui.h
gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc
gui/rfb.cc gui/sdl.cc gui/siminterface.cc gui/siminterface.h
gui/term.cc gui/win32.cc gui/wx.cc gui/wxmain.cc gui/wxmain.h
gui/x.cc instrument/example0/instrument.cc
instrument/example0/instrument.h
instrument/example1/instrument.cc
instrument/example1/instrument.h
instrument/stubs/instrument.cc instrument/stubs/instrument.h
iodev/cdrom.cc iodev/cdrom.h iodev/cdrom_osx.cc iodev/cmos.cc
iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_arpback.cc
iodev/eth_packetmaker.cc iodev/eth_packetmaker.h
iodev/floppy.cc iodev/floppy.h iodev/guest2host.h
iodev/harddrv.cc iodev/harddrv.h iodev/ioapic.cc
iodev/ioapic.h iodev/iodebug.cc iodev/iodev.h
iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.h
iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pic.h
iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h
iodev/sb16.cc iodev/sb16.h iodev/serial.cc iodev/serial.h
iodev/vga.cc iodev/vga.h memory/memory.h memory/misc_mem.cc
This is an interim update to allow others to test.
We have userland code running!!! (up to a point)
Able to start executing "sash" as /sbin/init in userland from linux 64 bit
kernel until it crashes trying to access a null pointer. No kernel panics
though, just a segfault loop.
Some things changed in the ctrl_xfer*.cc, fetchdecode*.cc,
and cpu.cc since the original patches, so I did some patch
integration by hand. Check the placement of the
macros BX_INSTR_FETCH_DECODE_COMPLETED() and BX_INSTR_OPCODE()
in cpu.cc to make sure I go them right. Also, I changed the
parameters to BX_INSTR_OPCODE() to update them to the new code.
I put some comments before each of these to help determine if
the placement is right.
These macros are only compiled in if you are gathering instrumentation
data from bochs, so they shouldn't effect others.
in cpu.cc out of the main loop, and into the asynchronous
events handling. I went through all the code paths, and
there doesn't seem to be any reason for that code to be
in the hot loop.
Added another accessor for getting instruction data, called
modC0(). A lot of instructions test whether the mod field
of mod-nnn-rm is 0xc0 or not, ie., it's a register operation
and not memory. So I flag this in fetchdecode{,64}.cc.
This added on the order of 1% performance improvement for
a Win95 boot.
Macroized a few leftover calls to Write_RMV_virtual_xyz()
that didn't get modified in the x86-64 merge. Really, they
just call the real function for now, but I want to have them
available to do direct writes with the guest2host TLB pointers.
but if you hand edit cpu/cpu.h, and change BxICacheEntries,
you can try different sizes. I'll make this more flexible
with configure. For now, use "--enable-icache" with no parameters.
- Modified fetchdecode.cc/fetchdecode64.cc just enough so that
instructions which encode a direct address now use a memory
resolution function which just sticks the immediate address
into rm_addr. With cached instructions we need this.
with accessors. Had to touch a number of files to update the
access using the new accessors.
Moved rm_addr to the CPU structure, to slim down bxInstruction_c
and to prevent future instruction caching from getting sprayed
with writes to individual rm_addr fields. There only needs to
be one. Though need to deal with instructions which have
static non-modrm addresses, but which are using rm_addr since
that will change.
bxInstruction_c is down to about 40 bytes now. Trying to
get down to 24 bytes.
use accessors. This lets me work on compressing the
size of fetch-decode structure (now called bxInstruction_c).
I've reduced it down to about 76 bytes. We should be able
to do much better soon. I needed the abstraction of the
accessors, so I have a lot of freedom to re-arrange things
without making massive future changes.
Lost a few percent of performance in these mods, but my
main focus was to get the abstraction.
enhancement to bochs. You can now configure with
--enable-guest2host-tlb.
Force the support of big pages (PSE) when x86-64 is configured.
Reverted back to only one kind of TLB entry style, since everything
is ported.
Fixed one bug in io.cc with as_64 and the index registers.
There are others, as noticed by Peter.
You need to use '--enable-global-pages' to configure in support.
If you have something to boot that uses them, give them a
spin. Really the were introduced for PPro and above, but
I haven't put in any limits. CPUID and CR4 report the proper
bits when configured, regardless of --enable-cpu-level at the
moment.
with GCC) align them with the GCC special alignment attribute.
Since there was then one available field, I split the protection
attributes and native host pointers into their own fields.
Before, with 3 dwords per TLB entry, some entries (about 3/8)
were spanning two processor cache lines (assuming a 32-byte
cache line). Now, they all fit within one cache line.
Knocked about 1.4% off Win95 boot time, probably more off normal
software runs.
it can decide how to proceed. Some of those bits are necessary
to make TLB invalidation decisions. INVLPG doesn't cause
a whole TLB flush anymore, just one page. Some of the
current CPU behaviours model the P6, especially on CR0
reloads. Earlier processors kept some pre-change pre-fetched
instructions until a branch. We could probably model that
by setting a flag, and letting the revalidate_prefetch_q
function cause serialization.
The TLB flush code only invalidates entries which are not
already invalidated for the case where the TLB invalidation
ID trick is not in use.
Kevin Lawton says he doesn't get a performance benefit.
I'm not sure if I do. Either way, the difference isn't
very large.
This code may get removed if it turns out to be useless.
direct reads/writes from native variables to the x86 (guest)
memory image. Look at the end of bochs.h. Don't know if that's
the right place to put them, but here you can extend these
macros to platform-specific asm() code if you like, or just
use the generic C code I supplied. Some platforms have special
instructions for byte-order swapping etc. Also, you can't
make any assumptions about the alignment of the pointers
passed.
mode uses the notion of the guest-to-host TLB. This has the
benefit of allowing more uniform and streamlined acceleration
code in access.cc which does not have to check if CR0.PG
is set, eliminating a few instructions per guest access.
Shaved just a little off execution time, as expected.
Also, access_linear now breaks accesses which span two pages,
into two calls the the physical memory routines, when paging
is off, just like it always has for paging on. Besides
being more uniform, this allows the physical memory access
routines to known the complete data item is contained
within a single physical page, and stop reapplying the
A20ADDR() macro to pointers as it increments them.
Perhaps things can be optimized a little more now there too...
I renamed the routines to {read,write}PhysicalPage() as
a reminder that these routines now operate on data
solely within one page.
I also added a little code so that the paging module is
notified when the A20 line is tweaked, so it can dump
whatever mappings it wants to.
so that a compare of the current access could be done more
efficiently against the cached values, both in the normal
paging routines, and in the accelerated code in access.cc.
This cut down the amount of code path needed to get to
direct use of a host address nicely, and speed definitely
got a boost as a result, especially if you use the
--enable-guest2host-tlb option.
The CR0.WP flag was a real pain, because it imparts
a complication on the way protections work. Fortunately
it's not a high-change flag, so I just base the new
cached info on the current CR0.WP value, and dump
the TLB cache when it changes.
- Paging code rehash. You must now use --enable-4meg-pages to
use 4Meg pages, with the default of disabled, since we don't well
support 4Meg pages yet. Paging table walks model a real CPU
more closely now, and I fixed some bugs in the old logic.
- Segment check redundancy elimination. After a segment is loaded,
reads and writes are marked when a segment type check succeeds, and
they are skipped thereafter, when possible.
- Repeated IO and memory string copy acceleration. Only some variants
of instructions are available on all platforms, word and dword
variants only on x86 for the moment due to alignment and endian issues.
This is compiled in currently with no option - I should add a configure
option.
- Added a guest linear address to host TLB. Actually, I just stick
the host address (mem.vector[addr] address) in the upper 29 bits
of the field 'combined_access' since they are unused. Convenient
for now. I'm only storing page frame addresses. This was the
simplest for of such a TLB. We can likely enhance this. Also,
I only accelerated the normal read/write routines in access.cc.
Could also modify the read-modify-write versions too. You must
use --enable-guest2host-tlb, to try this out. Currently speeds
up Win95 boot time by about 3.5% for me. More ground to cover...
- Minor mods to CPUI/MOV_CdRd for CMOV.
- Integrated enhancements from Volker to getHostMemAddr() for PCI
being enabled.
tries to fix it. The shortcuts to register names such as AX and DL are
#defines in cpu/cpu.h, and they are defined in terms of BX_CPU_THIS_PTR.
When BX_USE_CPU_SMF=1, this works fine. (This is what bochs used for
a long time, and nobody used the SMF=0 mode at all.) To make SMP bochs
work, I had to get SMF=0 mode working for the CPU so that there could
be an array of cpus.
When SMF=0 for the CPU, BX_CPU_THIS_PTR is defined to be "this->" which
only works within methods of BX_CPU_C. Code outside of BX_CPU_C must
reference BX_CPU(num) instead.
- to try to enforce the correct use of AL/AX/DL/etc. shortcuts, they are
now only #defined when "NEED_CPU_REG_SHORTCUTS" is #defined. This is
only done in the cpu/*.cc code.
in BRANCH-smp-bochs revisions.
- The general task was to make multiple CPU's which communicate
through their APICs. So instead of BX_CPU and BX_MEM, we now have
BX_CPU(x) and BX_MEM(y). For an SMP simulation you have several
processors in a shared memory space, so there might be processors
BX_CPU(0..3) but only one memory space BX_MEM(0). For cosimulation,
you could have BX_CPU(0) with BX_MEM(0), then BX_CPU(1) with
BX_MEM(1). WARNING: Cosimulation is almost certainly broken by the
SMP changes.
- to simulate multiple CPUs, you have to give each CPU time to execute
in turn. This is currently implemented using debugger guards. The
cpu loop steps one CPU for a few instructions, then steps the
next CPU for a few instructions, etc.
- there is some limited support in the debugger for two CPUs, for
example printing information from each CPU when single stepping.
To see the commit logs for this use either cvsweb or
cvs update -r BRANCH-io-cleanup and then 'cvs log' the various files.
In general this provides a generic interface for logging.
logfunctions:: is a class that is inherited by some classes, and also
. allocated as a standalone global called 'genlog'. All logging uses
. one of the ::info(), ::error(), ::ldebug(), ::panic() methods of this
. class through 'BX_INFO(), BX_ERROR(), BX_DEBUG(), BX_PANIC()' macros
. respectively.
.
. An example usage:
. BX_INFO(("Hello, World!\n"));
iofunctions:: is a class that is allocated once by default, and assigned
as the iofunction of each logfunctions instance. It is this class that
maintains the file descriptor and other output related code, at this
point using vfprintf(). At some future point, someone may choose to
write a gui 'console' for bochs to which messages would be redirected
simply by assigning a different iofunction class to the various logfunctions
objects.
More cleanup is coming, but this works for now. If you want to see alot
of debugging output, in main.cc, change onoff[LOGLEV_DEBUG]=0 to =1.
Comments, bugs, flames, to me: todd@fries.net
