Bochs/bochs/main.cc

1538 lines
48 KiB
C++
Raw Normal View History

2001-10-03 16:56:51 +04:00
/////////////////////////////////////////////////////////////////////////
// $Id$
2001-10-03 16:56:51 +04:00
/////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2001-2021 The Bochs Project
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
2009-08-22 23:30:23 +04:00
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#include "bochs.h"
#include "bxversion.h"
#include "param_names.h"
#include "gui/textconfig.h"
#if BX_USE_WIN32CONFIG
#include "gui/win32dialog.h"
#endif
#include "cpu/cpu.h"
#include "iodev/iodev.h"
#include "iodev/hdimage/hdimage.h"
2003-08-04 20:03:09 +04:00
#ifdef HAVE_LOCALE_H
#include <locale.h>
#endif
#if BX_WITH_SDL || BX_WITH_SDL2
// since SDL redefines main() to SDL_main(), we must include SDL.h so that the
// C language prototype is found. Otherwise SDL_main() will get its name
// mangled and not match what the SDL library is expecting.
#include <SDL.h>
#if defined(macintosh)
// Work around a bug in SDL 1.2.4 on MacOS X, which redefines getenv to
// SDL_getenv, but then neglects to provide SDL_getenv. It happens
// because we are defining -Dmacintosh.
#undef getenv
#endif
#endif
#if BX_WITH_CARBON
#include <Carbon/Carbon.h>
#endif
extern "C" {
#include <signal.h>
}
#if BX_GUI_SIGHANDLER
bx_bool bx_gui_sighandler = 0;
#endif
int bx_init_main(int argc, char *argv[]);
void bx_init_hardware(void);
void bx_plugin_ctrl_reset(bx_bool init_done);
void bx_init_options(void);
void bx_init_bx_dbg(void);
2007-10-25 03:29:40 +04:00
static const char *divider = "========================================================================";
bx_startup_flags_t bx_startup_flags;
bx_bool bx_user_quit;
Bit8u bx_cpu_count;
#if BX_SUPPORT_APIC
2010-02-28 17:52:17 +03:00
Bit32u apic_id_mask; // determinted by XAPIC option
bx_bool simulate_xapic;
#endif
/* typedefs */
2001-06-19 20:25:41 +04:00
#define LOG_THIS genlog->
bx_pc_system_c bx_pc_system;
bx_debug_t bx_dbg;
typedef BX_CPU_C *BX_CPU_C_PTR;
#if BX_SUPPORT_SMP
// multiprocessor simulation, we need an array of cpus
BOCHSAPI BX_CPU_C_PTR *bx_cpu_array = NULL;
#else
// single processor simulation, so there's one of everything
BOCHSAPI BX_CPU_C bx_cpu;
#endif
BOCHSAPI BX_MEM_C bx_mem;
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
char *bochsrc_filename = NULL;
size_t bx_get_timestamp(char *buffer)
{
#if VER_SVNFLAG == 1
#ifdef __DATE__
#ifdef __TIME__
sprintf(buffer, "Compiled on %s at %s", __DATE__, __TIME__);
#else
sprintf(buffer, "Compiled on %s", __DATE__);
#endif
#else
buffer[0] = 0;
#endif
#else
// Releases use the timestamp from README file
sprintf(buffer, "Timestamp: %s", REL_TIMESTAMP);
#endif
return strlen(buffer);
}
2009-03-26 12:51:22 +03:00
void bx_print_header()
2001-06-19 20:25:41 +04:00
{
char buffer[128];
printf("%s\n", divider);
sprintf (buffer, "Bochs x86 Emulator %s\n", VERSION);
2009-03-26 12:51:22 +03:00
bx_center_print(stdout, buffer, 72);
2001-06-19 20:25:41 +04:00
if (REL_STRING[0]) {
2009-03-26 12:51:22 +03:00
sprintf(buffer, "%s\n", REL_STRING);
bx_center_print(stdout, buffer, 72);
if (bx_get_timestamp(buffer) > 0) {
bx_center_print(stdout, buffer, 72);
printf("\n");
}
2001-06-19 20:25:41 +04:00
}
2009-03-26 12:51:22 +03:00
printf("%s\n", divider);
2001-06-19 20:25:41 +04:00
}
#if BX_WITH_CARBON
/* Original code by Darrell Walisser - dwaliss1@purdue.edu */
static void setupWorkingDirectory(char *path)
{
char parentdir[MAXPATHLEN];
char *c;
strncpy (parentdir, path, MAXPATHLEN);
c = (char*) parentdir;
while (*c != '\0') /* go to end */
c++;
while (*c != '/') /* back up to parent */
c--;
*c = '\0'; /* cut off last part (binary name) */
/* chdir to the binary app's parent */
int n;
n = chdir (parentdir);
if (n) BX_PANIC(("failed to change dir to parent"));
/* chdir to the .app's parent */
n = chdir ("../../../");
if (n) BX_PANIC(("failed to change to ../../.."));
}
/* Panic button to display fatal errors.
Completely self contained, can't rely on carbon.cc being available */
static void carbonFatalDialog(const char *error, const char *exposition)
{
DialogRef alertDialog;
CFStringRef cfError;
CFStringRef cfExposition;
DialogItemIndex index;
AlertStdCFStringAlertParamRec alertParam = {0};
fprintf(stderr, "Entering carbonFatalDialog: %s\n", error);
// Init libraries
InitCursor();
// Assemble dialog
cfError = CFStringCreateWithCString(NULL, error, kCFStringEncodingASCII);
if(exposition != NULL)
{
cfExposition = CFStringCreateWithCString(NULL, exposition, kCFStringEncodingASCII);
}
else { cfExposition = NULL; }
alertParam.version = kStdCFStringAlertVersionOne;
alertParam.defaultText = CFSTR("Quit");
alertParam.position = kWindowDefaultPosition;
alertParam.defaultButton = kAlertStdAlertOKButton;
// Display Dialog
CreateStandardAlert(
kAlertStopAlert,
cfError,
cfExposition, /* can be NULL */
&alertParam, /* can be NULL */
&alertDialog);
RunStandardAlert(alertDialog, NULL, &index);
// Cleanup
CFRelease(cfError);
if(cfExposition != NULL) { CFRelease(cfExposition); }
}
#endif
#if BX_DEBUGGER
void print_tree(bx_param_c *node, int level, bx_bool xml)
{
int i;
char tmpstr[BX_PATHNAME_LEN];
for (i=0; i<level; i++)
dbg_printf(" ");
if (node == NULL) {
dbg_printf("NULL pointer\n");
return;
}
if (xml)
dbg_printf("<%s>", node->get_name());
else
dbg_printf("%s = ", node->get_name());
switch (node->get_type()) {
case BXT_PARAM_NUM:
case BXT_PARAM_BOOL:
case BXT_PARAM_ENUM:
case BXT_PARAM_STRING:
node->dump_param(tmpstr, BX_PATHNAME_LEN, 1);
dbg_printf("%s", tmpstr);
break;
case BXT_LIST:
{
if (!xml) dbg_printf("{");
dbg_printf("\n");
bx_list_c *list = (bx_list_c*)node;
for (i=0; i < list->get_size(); i++) {
print_tree(list->get(i), level+1, xml);
}
for (i=0; i<level; i++)
dbg_printf(" ");
if (!xml) dbg_printf("}");
break;
}
case BXT_PARAM_DATA:
dbg_printf("'binary data size=%d'", ((bx_shadow_data_c*)node)->get_size());
break;
default:
dbg_printf("(unknown parameter type)");
}
if (xml) dbg_printf("</%s>", node->get_name());
dbg_printf("\n");
}
#endif
#if BX_ENABLE_STATISTICS
void print_statistics_tree(bx_param_c *node, int level)
{
for (int i=0; i<level; i++)
printf(" ");
if (node == NULL) {
printf("NULL pointer\n");
return;
}
switch (node->get_type()) {
case BXT_PARAM_NUM:
{
bx_param_num_c* param = (bx_param_num_c*) node;
printf("%s = " FMT_LL "d\n", node->get_name(), param->get64());
param->set(0); // clear the statistic
}
break;
case BXT_PARAM_BOOL:
BX_PANIC(("boolean statistics are not supported !"));
break;
case BXT_PARAM_ENUM:
BX_PANIC(("enum statistics are not supported !"));
break;
case BXT_PARAM_STRING:
BX_PANIC(("string statistics are not supported !"));
break;
case BXT_LIST:
{
bx_list_c *list = (bx_list_c*)node;
if (list->get_size() > 0) {
printf("%s = \n", node->get_name());
for (int i=0; i < list->get_size(); i++) {
print_statistics_tree(list->get(i), level+1);
}
}
break;
}
case BXT_PARAM_DATA:
BX_PANIC(("binary data statistics are not supported !"));
break;
default:
BX_PANIC(("%s (unknown parameter type)\n", node->get_name()));
break;
}
}
#endif
int bxmain(void)
{
2003-08-04 20:03:09 +04:00
#ifdef HAVE_LOCALE_H
// Initialize locale (for isprint() and other functions)
setlocale (LC_ALL, "");
#endif
bx_init_siminterface(); // create the SIM object
static jmp_buf context;
if (setjmp (context) == 0) {
SIM->set_quit_context (&context);
BX_INSTR_INIT_ENV();
if (bx_init_main(bx_startup_flags.argc, bx_startup_flags.argv) < 0) {
BX_INSTR_EXIT_ENV();
return 0;
}
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
// read a param to decide which config interface to start.
// If one exists, start it. If not, just begin.
bx_param_enum_c *ci_param = SIM->get_param_enum(BXPN_SEL_CONFIG_INTERFACE);
2007-10-25 03:29:40 +04:00
const char *ci_name = ci_param->get_selected();
if (!strcmp(ci_name, "textconfig")) {
#if BX_USE_TEXTCONFIG
init_text_config_interface(); // in textconfig.h
#else
BX_PANIC(("configuration interface 'textconfig' not present"));
#endif
}
else if (!strcmp(ci_name, "win32config")) {
#if BX_USE_WIN32CONFIG
init_win32_config_interface();
#else
BX_PANIC(("configuration interface 'win32config' not present"));
#endif
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
#if BX_WITH_WX
else if (!strcmp(ci_name, "wx")) {
PLUG_load_gui_plugin("wx");
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
}
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
#endif
else {
BX_PANIC(("unsupported configuration interface '%s'", ci_name));
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
ci_param->set_enabled(0);
int status = SIM->configuration_interface(ci_name, CI_START);
if (status == CI_ERR_NO_TEXT_CONSOLE)
BX_PANIC(("Bochs needed the text console, but it was not usable"));
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
// user quit the config interface, so just quit
} else {
// quit via longjmp
}
SIM->set_quit_context(NULL);
#if defined(WIN32)
if (!bx_user_quit) {
// ask user to press ENTER before exiting, so that they can read messages
// before the console window is closed. This isn't necessary after pressing
// the power button.
fprintf(stderr, "\nBochs is exiting. Press ENTER when you're ready to close this window.\n");
char buf[16];
fgets(buf, sizeof(buf), stdin);
}
#endif
plugin_cleanup();
BX_INSTR_EXIT_ENV();
return SIM->get_exit_code();
}
#if defined(__WXMSW__)
// win32 applications get the whole command line in one long string.
// This function is used to split up the string into argc and argv,
// so that the command line can be used on win32 just like on every
// other platform.
//
// I'm sure other people have written this same function, and they may have
// done it better, but I don't know where to find it. -BBD
#ifndef MAX_ARGLEN
#define MAX_ARGLEN 80
#endif
int split_string_into_argv(char *string, int *argc_out, char **argv, int max_argv)
{
char *buf0 = new char[strlen(string)+1];
strcpy (buf0, string);
char *buf = buf0;
int in_double_quote = 0, in_single_quote = 0;
for (int i=0; i<max_argv; i++)
argv[i] = NULL;
argv[0] = new char[6];
strcpy (argv[0], "bochs");
int argc = 1;
argv[argc] = new char[MAX_ARGLEN];
char *outp = &argv[argc][0];
// trim leading and trailing spaces
while (*buf==' ') buf++;
char *p;
char *last_nonspace = buf;
for (p=buf; *p; p++) {
if (*p!=' ') last_nonspace = p;
}
if (last_nonspace != buf) *(last_nonspace+1) = 0;
p = buf;
bx_bool done = false;
while (!done) {
//fprintf (stderr, "parsing '%c' with singlequote=%d, dblquote=%d\n", *p, in_single_quote, in_double_quote);
switch (*p) {
case '\0':
done = true;
// fall through into behavior for space
case ' ':
if (in_double_quote || in_single_quote)
goto do_default;
*outp = 0;
//fprintf (stderr, "completed arg %d = '%s'\n", argc, argv[argc]);
argc++;
if (argc >= max_argv) {
fprintf (stderr, "too many arguments. Increase MAX_ARGUMENTS\n");
return -1;
}
argv[argc] = new char[MAX_ARGLEN];
outp = &argv[argc][0];
while (*p==' ') p++;
break;
case '"':
if (in_single_quote) goto do_default;
in_double_quote = !in_double_quote;
p++;
break;
case '\'':
if (in_double_quote) goto do_default;
in_single_quote = !in_single_quote;
p++;
break;
do_default:
default:
if (outp-&argv[argc][0] >= MAX_ARGLEN) {
//fprintf (stderr, "command line arg %d exceeded max size %d\n", argc, MAX_ARGLEN);
return -1;
}
*(outp++) = *(p++);
}
}
if (in_single_quote) {
fprintf (stderr, "end of string with mismatched single quote (')\n");
return -1;
}
if (in_double_quote) {
fprintf (stderr, "end of string with mismatched double quote (\")\n");
return -1;
}
*argc_out = argc;
return 0;
}
#endif /* if defined(__WXMSW__) */
2014-06-29 03:49:10 +04:00
#if defined(__WXMSW__) || ((BX_WITH_SDL || BX_WITH_SDL2) && defined(WIN32))
// The RedirectIOToConsole() function is copied from an article called "Adding
// Console I/O to a Win32 GUI App" in Windows Developer Journal, December 1997.
// It creates a console window.
//
// NOTE: It could probably be written so that it can safely be called for all
// win32 builds.
int RedirectIOToConsole()
{
int hConHandle;
Bit64s lStdHandle;
FILE *fp;
// allocate a console for this app
FreeConsole();
if (!AllocConsole()) {
MessageBox(NULL, "Failed to create text console", "Error", MB_ICONERROR);
return 0;
}
// redirect unbuffered STDOUT to the console
lStdHandle = (Bit64s)GetStdHandle(STD_OUTPUT_HANDLE);
hConHandle = _open_osfhandle((long)lStdHandle, _O_TEXT);
fp = _fdopen(hConHandle, "w");
*stdout = *fp;
setvbuf(stdout, NULL, _IONBF, 0);
// redirect unbuffered STDIN to the console
lStdHandle = (Bit64s)GetStdHandle(STD_INPUT_HANDLE);
hConHandle = _open_osfhandle((long)lStdHandle, _O_TEXT);
fp = _fdopen(hConHandle, "r");
*stdin = *fp;
setvbuf(stdin, NULL, _IONBF, 0);
// redirect unbuffered STDERR to the console
lStdHandle = (Bit64s)GetStdHandle(STD_ERROR_HANDLE);
hConHandle = _open_osfhandle((long)lStdHandle, _O_TEXT);
fp = _fdopen(hConHandle, "w");
*stderr = *fp;
setvbuf(stderr, NULL, _IONBF, 0);
return 1;
}
2014-06-29 03:49:10 +04:00
#endif /* if defined(__WXMSW__) || ((BX_WITH_SDL || BX_WITH_SDL2) && defined(WIN32)) */
#if defined(__WXMSW__)
// only used for wxWidgets/win32.
// This works ok in Cygwin with a standard wxWidgets compile. In
// VC++ wxWidgets must be compiled with -DNOMAIN=1.
int WINAPI WinMain(
HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR m_lpCmdLine, int nCmdShow)
{
bx_startup_flags.hInstance = hInstance;
bx_startup_flags.hPrevInstance = hPrevInstance;
bx_startup_flags.m_lpCmdLine = m_lpCmdLine;
bx_startup_flags.nCmdShow = nCmdShow;
int max_argv = 20;
bx_startup_flags.argv = (char**) malloc (max_argv * sizeof (char*));
split_string_into_argv(m_lpCmdLine, &bx_startup_flags.argc, bx_startup_flags.argv, max_argv);
int arg = 1;
bx_bool bx_noconsole = 0;
while (arg < bx_startup_flags.argc) {
if (!strcmp("-noconsole", bx_startup_flags.argv[arg])) {
bx_noconsole = 1;
break;
}
arg++;
}
if (!bx_noconsole) {
if (!RedirectIOToConsole()) {
return 1;
}
SetConsoleTitle("Bochs for Windows (wxWidgets port) - Console");
}
return bxmain();
}
#endif
#if !defined(__WXMSW__)
// normal main function, presently in for all cases except for
// wxWidgets under win32.
int CDECL main(int argc, char *argv[])
{
bx_startup_flags.argc = argc;
bx_startup_flags.argv = argv;
#ifdef WIN32
int arg = 1;
bx_bool bx_noconsole = 0;
while (arg < argc) {
if (!strcmp("-noconsole", argv[arg])) {
bx_noconsole = 1;
break;
}
arg++;
}
if (bx_noconsole) {
FreeConsole();
} else {
2014-06-29 03:49:10 +04:00
#if BX_WITH_SDL || BX_WITH_SDL2
// if SDL/win32, try to create a console window.
if (!RedirectIOToConsole()) {
return 1;
}
#endif
SetConsoleTitle("Bochs for Windows - Console");
}
#endif
return bxmain();
}
#endif
void print_usage(void)
{
fprintf(stderr,
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
"Usage: bochs [flags] [bochsrc options]\n\n"
" -n no configuration file\n"
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
" -f configfile specify configuration file\n"
" -q quick start (skip configuration interface)\n"
" -benchmark N run Bochs in benchmark mode for N millions of emulated ticks\n"
#if BX_ENABLE_STATISTICS
" -dumpstats N dump Bochs stats every N millions of emulated ticks\n"
#endif
2006-05-27 19:54:49 +04:00
" -r path restore the Bochs state from path\n"
" -log filename specify Bochs log file name\n"
" -unlock unlock Bochs images leftover from previous session\n"
#if BX_DEBUGGER
" -rc filename execute debugger commands stored in file\n"
" -dbglog filename specify Bochs internal debugger log file name\n"
#endif
#ifdef WIN32
" -noconsole disable console window\n"
#endif
" --help display this help and exit\n"
" --help features display available features / devices and exit\n"
#if BX_CPU_LEVEL > 4
" --help cpu display supported CPU models and exit\n"
#endif
"\nFor information on Bochs configuration file arguments, see the\n"
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
#if (!defined(WIN32)) && !BX_WITH_MACOS
"bochsrc section in the user documentation or the man page of bochsrc.\n");
#else
"bochsrc section in the user documentation.\n");
#endif
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
}
int bx_init_main(int argc, char *argv[])
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
{
// To deal with initialization order problems inherent in C++, use the macros
// SAFE_GET_IOFUNC and SAFE_GET_GENLOG to retrieve "io" and "genlog" in all
// constructors or functions called by constructors. The macros test for
// NULL and create the object if necessary, then return it. Ensure that io
// and genlog get created, by making one reference to each macro right here.
// All other code can reference io and genlog directly. Because these
// objects are required for logging, and logging is so fundamental to
// knowing what the program is doing, they are never free()d.
SAFE_GET_IOFUNC(); // never freed
SAFE_GET_GENLOG(); // never freed
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
// initalization must be done early because some destructors expect
// the bochs config options to exist by the time they are called.
bx_init_bx_dbg();
#if BX_PLUGINS && BX_HAVE_GETENV && BX_HAVE_SETENV
// set a default plugin path, in case the user did not specify one
if (getenv("LTDL_LIBRARY_PATH") != NULL) {
BX_INFO(("LTDL_LIBRARY_PATH is set to '%s'", getenv("LTDL_LIBRARY_PATH")));
} else {
BX_INFO(("LTDL_LIBRARY_PATH not set. using compile time default '%s'",
BX_PLUGIN_PATH));
setenv("LTDL_LIBRARY_PATH", BX_PLUGIN_PATH, 1);
}
#endif
// initialize plugin system. This must happen before we attempt to
// load any modules.
plugin_startup();
bx_init_options();
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
bx_print_header();
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_RUN_START);
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
// interpret the args that start with -, like -q, -f, etc.
int arg = 1, load_rcfile=1;
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
while (arg < argc) {
// parse next arg
if (!strcmp("--help", argv[arg]) || !strncmp("-h", argv[arg], 2)
#if defined(WIN32)
|| !strncmp("/?", argv[arg], 2)
#endif
) {
if ((arg+1) < argc) {
if (!strcmp("features", argv[arg+1])) {
fprintf(stderr, "Supported features:\n\n");
#if BX_SUPPORT_CLGD54XX
fprintf(stderr, "cirrus\n");
#endif
#if BX_SUPPORT_VOODOO
fprintf(stderr, "voodoo\n");
#endif
#if BX_SUPPORT_PCI
fprintf(stderr, "pci\n");
#endif
#if BX_SUPPORT_PCIDEV
fprintf(stderr, "pcidev\n");
#endif
#if BX_SUPPORT_NE2K
fprintf(stderr, "ne2k\n");
#endif
#if BX_SUPPORT_PCIPNIC
fprintf(stderr, "pcipnic\n");
#endif
#if BX_SUPPORT_E1000
fprintf(stderr, "e1000\n");
#endif
#if BX_SUPPORT_SB16
fprintf(stderr, "sb16\n");
#endif
#if BX_SUPPORT_ES1370
fprintf(stderr, "es1370\n");
#endif
#if BX_SUPPORT_USB_OHCI
fprintf(stderr, "usb_ohci\n");
#endif
#if BX_SUPPORT_USB_UHCI
fprintf(stderr, "usb_uhci\n");
#endif
#if BX_SUPPORT_USB_EHCI
fprintf(stderr, "usb_ehci\n");
#endif
#if BX_SUPPORT_USB_XHCI
fprintf(stderr, "usb_xhci\n");
#endif
#if BX_GDBSTUB
fprintf(stderr, "gdbstub\n");
#endif
fprintf(stderr, "\n");
arg++;
}
#if BX_CPU_LEVEL > 4
else if (!strcmp("cpu", argv[arg+1])) {
int i = 0;
fprintf(stderr, "Supported CPU models:\n\n");
do {
fprintf(stderr, "%s\n", SIM->get_param_enum(BXPN_CPU_MODEL)->get_choice(i));
} while (i++ < SIM->get_param_enum(BXPN_CPU_MODEL)->get_max());
2011-08-29 00:14:53 +04:00
fprintf(stderr, "\n");
arg++;
}
#endif
} else {
print_usage();
}
SIM->quit_sim(0);
}
else if (!strcmp("-n", argv[arg])) {
load_rcfile = 0;
}
else if (!strcmp("-q", argv[arg])) {
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
}
else if (!strcmp("-log", argv[arg])) {
if (++arg >= argc) BX_PANIC(("-log must be followed by a filename"));
else SIM->get_param_string(BXPN_LOG_FILENAME)->set(argv[arg]);
}
else if (!strcmp("-unlock", argv[arg])) {
SIM->get_param_bool(BXPN_UNLOCK_IMAGES)->set(1);
}
#if BX_DEBUGGER
else if (!strcmp("-dbglog", argv[arg])) {
if (++arg >= argc) BX_PANIC(("-dbglog must be followed by a filename"));
else SIM->get_param_string(BXPN_DEBUGGER_LOG_FILENAME)->set(argv[arg]);
}
#endif
else if (!strcmp("-f", argv[arg])) {
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
if (++arg >= argc) BX_PANIC(("-f must be followed by a filename"));
else bochsrc_filename = argv[arg];
}
else if (!strcmp("-qf", argv[arg])) {
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
if (++arg >= argc) BX_PANIC(("-qf must be followed by a filename"));
else bochsrc_filename = argv[arg];
}
else if (!strcmp("-benchmark", argv[arg])) {
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
if (++arg >= argc) BX_PANIC(("-benchmark must be followed by a number"));
else SIM->get_param_num(BXPN_BOCHS_BENCHMARK)->set(atoi(argv[arg]));
}
#if BX_ENABLE_STATISTICS
else if (!strcmp("-dumpstats", argv[arg])) {
if (++arg >= argc) BX_PANIC(("-dumpstats must be followed by a number"));
else SIM->get_param_num(BXPN_DUMP_STATS)->set(atoi(argv[arg]));
}
#endif
else if (!strcmp("-r", argv[arg])) {
if (++arg >= argc) BX_PANIC(("-r must be followed by a path"));
else {
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
SIM->get_param_bool(BXPN_RESTORE_FLAG)->set(1);
SIM->get_param_string(BXPN_RESTORE_PATH)->set(argv[arg]);
}
}
#ifdef WIN32
else if (!strcmp("-noconsole", argv[arg])) {
// already handled in main() / WinMain()
}
#endif
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
#if BX_WITH_CARBON
else if (!strncmp("-psn", argv[arg], 4)) {
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
// "-psn" is passed if we are launched by double-clicking
// ugly hack. I don't know how to open a window to print messages in,
// so put them in /tmp/early-bochs-out.txt. Sorry. -bbd
io->init_log("/tmp/early-bochs-out.txt");
BX_INFO(("I was launched by double clicking. Fixing home directory."));
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
arg = argc; // ignore all other args.
setupWorkingDirectory (argv[0]);
// there is no stdin/stdout so disable the text-based config interface.
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
char cwd[MAXPATHLEN];
2003-10-02 15:33:42 +04:00
getwd (cwd);
BX_INFO(("Now my working directory is %s", cwd));
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
// if it was started from command line, there could be some args still.
for (int a=0; a<argc; a++) {
BX_INFO(("argument %d is %s", a, argv[a]));
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
}
}
#endif
#if BX_DEBUGGER
else if (!strcmp("-rc", argv[arg])) {
// process "-rc filename" option, if it exists
if (++arg >= argc) BX_PANIC(("-rc must be followed by a filename"));
else bx_dbg_set_rcfile(argv[arg]);
}
#endif
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
else if (argv[arg][0] == '-') {
print_usage();
BX_PANIC(("command line arg '%s' was not understood", argv[arg]));
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
}
else {
// the arg did not start with -, so stop interpreting flags
break;
}
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
arg++;
}
#if BX_WITH_CARBON
if(!getenv("BXSHARE"))
{
CFBundleRef mainBundle;
CFURLRef bxshareDir;
char bxshareDirPath[MAXPATHLEN];
BX_INFO(("fixing default bxshare location ..."));
// set bxshare to the directory that contains our application
mainBundle = CFBundleGetMainBundle();
BX_ASSERT(mainBundle != NULL);
bxshareDir = CFBundleCopyBundleURL(mainBundle);
BX_ASSERT(bxshareDir != NULL);
// translate this to a unix style full path
if(!CFURLGetFileSystemRepresentation(bxshareDir, true, (UInt8 *)bxshareDirPath, MAXPATHLEN))
{
BX_PANIC(("Unable to work out bxshare path! (Most likely path too long!)"));
return -1;
}
char *c;
c = (char*) bxshareDirPath;
while (*c != '\0') /* go to end */
c++;
while (*c != '/') /* back up to parent */
c--;
*c = '\0'; /* cut off last part (binary name) */
setenv("BXSHARE", bxshareDirPath, 1);
BX_INFO(("now my BXSHARE is %s", getenv("BXSHARE")));
CFRelease(bxshareDir);
}
#endif
#if BX_PLUGINS && BX_WITH_CARBON
// if there is no stdin, then we must create our own LTDL_LIBRARY_PATH.
// also if there is no LTDL_LIBRARY_PATH, but we have a bundle since we're here
// This is here so that it is available whenever --with-carbon is defined but
// the above code might be skipped, as in --with-sdl --with-carbon
if(!isatty(STDIN_FILENO) || !getenv("LTDL_LIBRARY_PATH"))
{
CFBundleRef mainBundle;
CFURLRef libDir;
char libDirPath[MAXPATHLEN];
if(!isatty(STDIN_FILENO))
{
// there is no stdin/stdout so disable the text-based config interface.
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_QUICK_START);
}
BX_INFO(("fixing default lib location ..."));
// locate the lib directory within the application bundle.
// our libs have been placed in bochs.app/Contents/(current platform aka MacOS)/lib
// This isn't quite right, but they are platform specific and we haven't put
// our plugins into true frameworks and bundles either
mainBundle = CFBundleGetMainBundle();
BX_ASSERT(mainBundle != NULL);
libDir = CFBundleCopyAuxiliaryExecutableURL(mainBundle, CFSTR("lib"));
BX_ASSERT(libDir != NULL);
// translate this to a unix style full path
if(!CFURLGetFileSystemRepresentation(libDir, true, (UInt8 *)libDirPath, MAXPATHLEN))
{
BX_PANIC(("Unable to work out ltdl library path within bochs bundle! (Most likely path too long!)"));
return -1;
}
setenv("LTDL_LIBRARY_PATH", libDirPath, 1);
BX_INFO(("now my LTDL_LIBRARY_PATH is %s", getenv("LTDL_LIBRARY_PATH")));
CFRelease(libDir);
}
#endif /* if BX_PLUGINS && BX_WITH_CARBON */
#if BX_HAVE_GETENV && BX_HAVE_SETENV
if (getenv("BXSHARE") != NULL) {
BX_INFO(("BXSHARE is set to '%s'", getenv("BXSHARE")));
} else {
#ifdef WIN32
BX_INFO(("BXSHARE not set. using system default '%s'",
get_builtin_variable("BXSHARE")));
setenv("BXSHARE", get_builtin_variable("BXSHARE"), 1);
#else
BX_INFO(("BXSHARE not set. using compile time default '%s'",
BX_SHARE_PATH));
setenv("BXSHARE", BX_SHARE_PATH, 1);
#endif
}
#else
// we don't have getenv or setenv. Do nothing.
#endif
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
int norcfile = 1;
if (SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
load_rcfile = 0;
norcfile = 0;
} else {
// set up and load pre-defined optional plugins before parsing configuration
bx_plugin_ctrl_reset(0);
}
SIM->init_save_restore();
SIM->init_statistics();
if (load_rcfile) {
// parse configuration file and command line arguments
#ifdef WIN32
int length;
if (bochsrc_filename != NULL) {
lstrcpy(bx_startup_flags.initial_dir, bochsrc_filename);
length = lstrlen(bx_startup_flags.initial_dir);
while ((length > 1) && (bx_startup_flags.initial_dir[length-1] != 92)) length--;
bx_startup_flags.initial_dir[length] = 0;
} else {
bx_startup_flags.initial_dir[0] = 0;
}
#endif
if (bochsrc_filename == NULL) bochsrc_filename = bx_find_bochsrc ();
if (bochsrc_filename)
norcfile = bx_read_configuration(bochsrc_filename);
}
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
if (norcfile) {
// No configuration was loaded, so the current settings are unusable.
// Switch off quick start so that we will drop into the configuration
// interface.
if (SIM->get_param_enum(BXPN_BOCHS_START)->get() == BX_QUICK_START) {
if (!SIM->test_for_text_console())
BX_PANIC(("Unable to start Bochs without a bochsrc.txt and without a text console"));
else
2006-05-27 19:54:49 +04:00
BX_ERROR(("Switching off quick start, because no configuration file was found."));
}
SIM->get_param_enum(BXPN_BOCHS_START)->set(BX_LOAD_START);
}
2006-05-27 19:54:49 +04:00
if (SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
if (arg < argc) {
BX_ERROR(("WARNING: bochsrc options are ignored in restore mode!"));
}
}
else {
2006-05-27 19:54:49 +04:00
// parse the rest of the command line. This is done after reading the
// configuration file so that the command line arguments can override
// the settings from the file.
if (bx_parse_cmdline(arg, argc, argv)) {
BX_PANIC(("There were errors while parsing the command line"));
return -1;
}
}
- clean up the command line argument parsing. Before, we had two slightly different versions of the code for wxWindows and non-wxWindows and the GDB stub did not accept any command line options at all. - IMPORTANT CHANGE: the quick start option used to cause two things: 1) read the bochsrc immediately, 2) start simulation immediately without going into the config interface. This has changed in a subtle way. Now, we always try to read the bochsrc immediately. Then if the quick start option is on, we start the simulation immediately. - add "Restore Factory Default Configuration" in text config menu. It was already there in wx. Now the default choice is always "5. Begin simulation" and because the bochsrc is always read now, this works. - When the user chooses "Read configuration file" from either text mode or wx interfaces, reset all bochs parameters first, then read in the new file. This means that every time you read a configuration file you are starting from a consistent "blank slate". - move much of the code from bx_do_text_config_interface into bx_init_main so that wxWindows and non-wxWindows code uses the same logic. There was only a tiny bit left in bx_do_text_config_interface so I eliminated it. - move the "help" message into a separate function print_usage() - detect all flags (cmdline args that start with -) in a loop, instead of a big if/else. This makes it easy to add others. - fix problem with Carbon gui, so that -psn arg gets ignored - print usage if you type -h, --help, or if flags are not recognized - code that called io->set_log_action (that sets the log action for all devices) was only called if the configuration interface was on; I'm not sure why. Now it is called all the time. - the wxWindows equivalent of main() is called MyApp::OnInit. Now OnInit and main() are very similar. They both call bx_init_siminterface, then bx_init_main (and quit if it fails), then show the config interface if quickstart is off, and then simulate. - modified: main.cc gui/control.cc gui/wxmain.cc
2002-10-14 17:37:20 +04:00
return 0;
}
bx_bool load_and_init_display_lib(void)
{
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
if (bx_gui != NULL) {
// bx_gui has already been filled in. This happens when you start
// the simulation for the second time.
// Also, if you load wxWidgets as the configuration interface. Its
// plugin_init will install wxWidgets as the bx_gui.
return 1;
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
BX_ASSERT(bx_gui == NULL);
bx_param_enum_c *ci_param = SIM->get_param_enum(BXPN_SEL_CONFIG_INTERFACE);
2007-10-25 03:29:40 +04:00
const char *ci_name = ci_param->get_selected();
bx_param_enum_c *gui_param = SIM->get_param_enum(BXPN_SEL_DISPLAY_LIBRARY);
2007-10-25 03:29:40 +04:00
const char *gui_name = gui_param->get_selected();
if (!strcmp(ci_name, "wx")) {
BX_ERROR(("change of the config interface to wx not implemented yet"));
}
if (!strcmp(gui_name, "wx")) {
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
// they must not have used wx as the configuration interface, or bx_gui
// would already be initialized. Sorry, it doesn't work that way.
BX_ERROR(("wxWidgets was not used as the configuration interface, so it cannot be used as the display library"));
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
// choose another, hopefully different!
gui_param->set(0);
gui_name = gui_param->get_selected();
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
if (!strcmp (gui_name, "wx")) {
BX_PANIC(("no alternative display libraries are available"));
return 0;
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
BX_ERROR(("changing display library to '%s' instead", gui_name));
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
PLUG_load_gui_plugin(gui_name);
#if BX_GUI_SIGHANDLER
// set the flag for guis requiring a GUI sighandler.
// useful when guis are compiled as plugins
// only term for now
if (!strcmp(gui_name, "term")) {
bx_gui_sighandler = 1;
}
#endif
return (bx_gui != NULL);
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
}
int bx_begin_simulation(int argc, char *argv[])
{
bx_user_quit = 0;
if (SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
if (!SIM->restore_config()) {
BX_PANIC(("cannot restore configuration"));
SIM->get_param_bool(BXPN_RESTORE_FLAG)->set(0);
}
} else {
// make sure all optional plugins have been loaded
SIM->opt_plugin_ctrl("*", 1);
}
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
// deal with gui selection
if (!load_and_init_display_lib()) {
BX_PANIC(("no gui module was loaded"));
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
return 0;
}
bx_cpu_count = SIM->get_param_num(BXPN_CPU_NPROCESSORS)->get() *
SIM->get_param_num(BXPN_CPU_NCORES)->get() *
SIM->get_param_num(BXPN_CPU_NTHREADS)->get();
#if BX_SUPPORT_APIC
simulate_xapic = (SIM->get_param_enum(BXPN_CPUID_APIC)->get() >= BX_CPUID_SUPPORT_XAPIC);
2010-02-28 17:52:17 +03:00
// For P6 and Pentium family processors the local APIC ID feild is 4 bits
// APIC_MAX_ID indicate broadcast so it can't be used as valid APIC ID
apic_id_mask = simulate_xapic ? 0xFF : 0xF;
2010-02-28 17:52:17 +03:00
// leave one APIC ID to I/O APIC
unsigned max_smp_threads = apic_id_mask - 1;
if (bx_cpu_count > max_smp_threads) {
BX_PANIC(("cpu: too many SMP threads defined, only %u threads supported by %sAPIC",
max_smp_threads, simulate_xapic ? "x" : "legacy "));
2010-02-28 17:52:17 +03:00
}
#endif
2010-02-28 17:52:17 +03:00
BX_ASSERT(bx_cpu_count > 0);
bx_init_hardware();
SIM->set_init_done(1);
// update headerbar buttons since drive status can change during init
bx_gui->update_drive_status_buttons();
2020-03-09 10:27:55 +03:00
// initialize statusbar and set all items inactive
if (!SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
bx_gui->statusbar_setitem(-1, 0);
} else {
SIM->get_param_string(BXPN_RESTORE_PATH)->set("none");
}
// The set handler for mouse_enabled does not actually update the gui
// until init_done is set. This forces the set handler to be called,
// which sets up the mouse enabled GUI-specific stuff correctly.
// Not a great solution but it works. BBD
SIM->get_param_bool(BXPN_MOUSE_ENABLED)->set(SIM->get_param_bool(BXPN_MOUSE_ENABLED)->get());
#if BX_DEBUGGER
// If using the debugger, it will take control and call
// bx_init_hardware() and cpu_loop()
bx_dbg_main();
#else
#if BX_GDBSTUB
// If using gdbstub, it will take control and call
// bx_init_hardware() and cpu_loop()
if (bx_dbg.gdbstub_enabled) bx_gdbstub_init();
else
#endif
{
if (BX_SMP_PROCESSORS == 1) {
// only one processor, run as fast as possible by not messing with
// quantums and loops.
while (1) {
BX_CPU(0)->cpu_loop();
if (bx_pc_system.kill_bochs_request)
break;
}
// for one processor, the only reason for cpu_loop to return is
// that kill_bochs_request was set by the GUI interface.
}
2011-07-10 02:17:16 +04:00
#if BX_SUPPORT_SMP
else {
// SMP simulation: do a few instructions on each processor, then switch
// to another. Increasing quantum speeds up overall performance, but
// reduces granularity of synchronization between processors.
// Current implementation uses dynamic quantum, each processor will
// execute exactly one trace then quit the cpu_loop and switch to
// the next processor.
static int quantum = SIM->get_param_num(BXPN_SMP_QUANTUM)->get();
Bit32u executed = 0, processor = 0;
bool run = true;
if (setjmp(BX_CPU_C::jmp_buf_env)) {
// can get here only from exception function or VMEXIT
BX_CPU(processor)->icount++;
run = false;
}
while (1) {
// do some instructions in each processor
if (run)
BX_CPU(processor)->cpu_run_trace();
else
run = true;
// see how many instruction it was able to run
Bit32u n = (Bit32u)(BX_CPU(processor)->get_icount() - BX_CPU(processor)->icount_last_sync);
if (n == 0) n = quantum; // the CPU was halted
executed += n;
2011-09-23 01:48:54 +04:00
if (++processor == BX_SMP_PROCESSORS) {
processor = 0;
BX_TICKN(executed / BX_SMP_PROCESSORS);
executed %= BX_SMP_PROCESSORS;
}
BX_CPU(processor)->icount_last_sync = BX_CPU(processor)->get_icount();
if (bx_pc_system.kill_bochs_request)
break;
}
}
2011-07-10 02:17:16 +04:00
#endif /* BX_SUPPORT_SMP */
}
#endif /* BX_DEBUGGER == 0 */
BX_INFO(("cpu loop quit, shutting down simulator"));
bx_atexit();
return(0);
}
void bx_stop_simulation(void)
{
// in wxWidgets, the whole simulator is running in a separate thread.
// our only job is to end the thread as soon as possible, NOT to shut
// down the whole application with an exit.
BX_CPU(0)->async_event = 1;
bx_pc_system.kill_bochs_request = 1;
// the cpu loop will exit very soon after this condition is set.
}
void bx_sr_after_restore_state(void)
{
2006-05-27 19:54:49 +04:00
#if BX_SUPPORT_SMP == 0
BX_CPU(0)->after_restore_state();
#else
for (unsigned i=0; i<BX_SMP_PROCESSORS; i++) {
BX_CPU(i)->after_restore_state();
}
#endif
DEV_after_restore_state();
}
void bx_set_log_actions_by_device(bx_bool panic_flag)
{
int id, l, m, val;
bx_list_c *loglev, *level;
bx_param_num_c *action;
loglev = (bx_list_c*) SIM->get_param("general.logfn");
for (l = 0; l < loglev->get_size(); l++) {
level = (bx_list_c*) loglev->get(l);
for (m = 0; m < level->get_size(); m++) {
action = (bx_param_num_c*) level->get(m);
id = SIM->get_logfn_id(action->get_name());
val = action->get();
if (id < 0) {
if (panic_flag) {
BX_PANIC(("unknown log function module '%s'", action->get_name()));
}
} else if (val >= 0) {
SIM->set_log_action(id, l, val);
// mark as 'done'
action->set(-1);
}
}
}
}
void bx_init_hardware()
{
int i;
char pname[16];
bx_list_c *base;
char buffer[128];
2004-06-05 02:06:55 +04:00
// all configuration has been read, now initialize everything.
bx_pc_system.initialize(SIM->get_param_num(BXPN_IPS)->get());
if (SIM->get_param_string(BXPN_LOG_FILENAME)->getptr()[0]!='-') {
BX_INFO(("using log file %s", SIM->get_param_string(BXPN_LOG_FILENAME)->getptr()));
io->init_log(SIM->get_param_string(BXPN_LOG_FILENAME)->getptr());
2001-05-22 23:07:53 +04:00
}
io->set_log_prefix(SIM->get_param_string(BXPN_LOG_PREFIX)->getptr());
2002-06-28 18:03:47 +04:00
// Output to the log file the cpu and device settings
// This will by handy for bug reports
BX_INFO(("Bochs x86 Emulator %s", VERSION));
BX_INFO((" %s", REL_STRING));
if (bx_get_timestamp(buffer) > 0) {
BX_INFO((" %s", buffer));
}
BX_INFO(("System configuration"));
BX_INFO((" processors: %d (cores=%u, HT threads=%u)", BX_SMP_PROCESSORS,
SIM->get_param_num(BXPN_CPU_NCORES)->get(), SIM->get_param_num(BXPN_CPU_NTHREADS)->get()));
BX_INFO((" A20 line support: %s", BX_SUPPORT_A20?"yes":"no"));
2008-12-28 23:49:03 +03:00
#if BX_CONFIGURE_MSRS
const char *msrs_file = SIM->get_param_string(BXPN_CONFIGURABLE_MSRS_PATH)->getptr();
if ((strlen(msrs_file) > 0) && strcmp(msrs_file, "none"))
2008-12-28 23:53:31 +03:00
BX_INFO((" load configurable MSRs from file \"%s\"", msrs_file));
2008-12-28 23:49:03 +03:00
#endif
2011-05-04 23:26:11 +04:00
BX_INFO(("IPS is set to %d", (Bit32u) SIM->get_param_num(BXPN_IPS)->get()));
BX_INFO(("CPU configuration"));
#if BX_SUPPORT_SMP
BX_INFO((" SMP support: yes, quantum=%d", SIM->get_param_num(BXPN_SMP_QUANTUM)->get()));
#else
BX_INFO((" SMP support: no"));
#endif
unsigned cpu_model = SIM->get_param_enum(BXPN_CPU_MODEL)->get();
if (! cpu_model) {
#if BX_CPU_LEVEL >= 5
unsigned cpu_level = SIM->get_param_num(BXPN_CPUID_LEVEL)->get();
BX_INFO((" level: %d", cpu_level));
BX_INFO((" APIC support: %s", SIM->get_param_enum(BXPN_CPUID_APIC)->get_selected()));
#else
BX_INFO((" level: %d", BX_CPU_LEVEL));
BX_INFO((" APIC support: no"));
#endif
BX_INFO((" FPU support: %s", BX_SUPPORT_FPU?"yes":"no"));
2010-03-01 21:53:53 +03:00
#if BX_CPU_LEVEL >= 5
bx_bool mmx_enabled = SIM->get_param_bool(BXPN_CPUID_MMX)->get();
BX_INFO((" MMX support: %s", mmx_enabled?"yes":"no"));
BX_INFO((" 3dnow! support: %s", BX_SUPPORT_3DNOW?"yes":"no"));
2008-12-18 22:37:05 +03:00
#endif
2010-03-01 21:53:53 +03:00
#if BX_CPU_LEVEL >= 6
bx_bool sep_enabled = SIM->get_param_bool(BXPN_CPUID_SEP)->get();
BX_INFO((" SEP support: %s", sep_enabled?"yes":"no"));
BX_INFO((" SIMD support: %s", SIM->get_param_enum(BXPN_CPUID_SIMD)->get_selected()));
bx_bool xsave_enabled = SIM->get_param_bool(BXPN_CPUID_XSAVE)->get();
bx_bool xsaveopt_enabled = SIM->get_param_bool(BXPN_CPUID_XSAVEOPT)->get();
BX_INFO((" XSAVE support: %s %s",
xsave_enabled?"xsave":"no", xsaveopt_enabled?"xsaveopt":""));
bx_bool aes_enabled = SIM->get_param_bool(BXPN_CPUID_AES)->get();
BX_INFO((" AES support: %s", aes_enabled?"yes":"no"));
bx_bool sha_enabled = SIM->get_param_bool(BXPN_CPUID_SHA)->get();
BX_INFO((" SHA support: %s", sha_enabled?"yes":"no"));
bx_bool movbe_enabled = SIM->get_param_bool(BXPN_CPUID_MOVBE)->get();
BX_INFO((" MOVBE support: %s", movbe_enabled?"yes":"no"));
bx_bool adx_enabled = SIM->get_param_bool(BXPN_CPUID_ADX)->get();
BX_INFO((" ADX support: %s", adx_enabled?"yes":"no"));
2010-03-01 21:53:53 +03:00
#if BX_SUPPORT_X86_64
bx_bool x86_64_enabled = SIM->get_param_bool(BXPN_CPUID_X86_64)->get();
BX_INFO((" x86-64 support: %s", x86_64_enabled?"yes":"no"));
bx_bool xlarge_enabled = SIM->get_param_bool(BXPN_CPUID_1G_PAGES)->get();
BX_INFO((" 1G paging support: %s", xlarge_enabled?"yes":"no"));
#else
BX_INFO((" x86-64 support: no"));
2010-03-01 21:53:53 +03:00
#endif
#if BX_SUPPORT_MONITOR_MWAIT
bx_bool mwait_enabled = SIM->get_param_bool(BXPN_CPUID_MWAIT)->get();
BX_INFO((" MWAIT support: %s", mwait_enabled?"yes":"no"));
#endif
#if BX_SUPPORT_VMX
unsigned vmx_enabled = SIM->get_param_num(BXPN_CPUID_VMX)->get();
if (vmx_enabled) {
BX_INFO((" VMX support: %d", vmx_enabled));
}
else {
BX_INFO((" VMX support: no"));
}
2010-03-01 21:53:53 +03:00
#endif
#if BX_SUPPORT_SVM
bx_bool svm_enabled = SIM->get_param_bool(BXPN_CPUID_SVM)->get();
BX_INFO((" SVM support: %s", svm_enabled?"yes":"no"));
#endif
#endif // BX_CPU_LEVEL >= 6
}
else {
BX_INFO((" Using pre-defined CPU configuration: %s",
SIM->get_param_enum(BXPN_CPU_MODEL)->get_selected()));
}
BX_INFO(("Optimization configuration"));
BX_INFO((" RepeatSpeedups support: %s", BX_SUPPORT_REPEAT_SPEEDUPS?"yes":"no"));
BX_INFO((" Fast function calls: %s", BX_FAST_FUNC_CALL?"yes":"no"));
BX_INFO((" Handlers Chaining speedups: %s", BX_SUPPORT_HANDLERS_CHAINING_SPEEDUPS?"yes":"no"));
BX_INFO(("Devices configuration"));
BX_INFO((" PCI support: %s", BX_SUPPORT_PCI?"i440FX i430FX i440BX":"no"));
#if BX_SUPPORT_NE2K || BX_SUPPORT_E1000
BX_INFO((" Networking support:%s%s",
BX_SUPPORT_NE2K?" NE2000":"", BX_SUPPORT_E1000?" E1000":""));
#else
BX_INFO((" Networking: no"));
#endif
#if BX_SUPPORT_SB16 || BX_SUPPORT_ES1370
BX_INFO((" Sound support:%s%s",
BX_SUPPORT_SB16?" SB16":"", BX_SUPPORT_ES1370?" ES1370":""));
#else
BX_INFO((" Sound support: no"));
#endif
#if BX_SUPPORT_PCIUSB
BX_INFO((" USB support:%s%s%s%s",
BX_SUPPORT_USB_UHCI?" UHCI":"", BX_SUPPORT_USB_OHCI?" OHCI":"",
BX_SUPPORT_USB_EHCI?" EHCI":"", BX_SUPPORT_USB_XHCI?" xHCI":""));
#else
BX_INFO((" USB support: no"));
#endif
BX_INFO((" VGA extension support: vbe%s%s",
BX_SUPPORT_CLGD54XX?" cirrus":"", BX_SUPPORT_VOODOO?" voodoo":""));
bx_hdimage_ctl.list_modules();
// Check if there is a romimage
if (SIM->get_param_string(BXPN_ROM_PATH)->isempty()) {
BX_ERROR(("No romimage to load. Is your bochsrc file loaded/valid ?"));
}
// set one shot timer for benchmark mode if needed, the timer will fire
// once and kill Bochs simulation after predefined amount of emulated
// ticks
int benchmark_mode = SIM->get_param_num(BXPN_BOCHS_BENCHMARK)->get();
if (benchmark_mode) {
BX_INFO(("Bochs benchmark mode is ON (~%d millions of ticks)", benchmark_mode));
bx_pc_system.register_timer_ticks(&bx_pc_system, bx_pc_system_c::benchmarkTimer,
(Bit64u) benchmark_mode * 1000000, 0 /* one shot */, 1, "benchmark.timer");
}
#if BX_ENABLE_STATISTICS
// set periodic timer for dumping statistics collected during Bochs run
int dumpstats = SIM->get_param_num(BXPN_DUMP_STATS)->get();
if (dumpstats) {
BX_INFO(("Dump statistics every %d millions of ticks", dumpstats));
bx_pc_system.register_timer_ticks(&bx_pc_system, bx_pc_system_c::dumpStatsTimer,
(Bit64u) dumpstats * 1000000, 1 /* continuous */, 1, "dumpstats.timer");
}
#endif
// set up memory and CPU objects
bx_param_num_c *bxp_memsize = SIM->get_param_num(BXPN_MEM_SIZE);
2009-10-17 22:17:28 +04:00
Bit64u memSize = bxp_memsize->get64() * BX_CONST64(1024*1024);
2009-10-17 21:38:58 +04:00
bx_param_num_c *bxp_host_memsize = SIM->get_param_num(BXPN_HOST_MEM_SIZE);
2009-10-17 22:17:28 +04:00
Bit64u hostMemSize = bxp_host_memsize->get64() * BX_CONST64(1024*1024);
2009-10-17 21:38:58 +04:00
2009-10-17 21:52:26 +04:00
// do not allocate more host memory than needed for emulation of guest RAM
if (memSize < hostMemSize) hostMemSize = memSize;
2009-10-17 21:38:58 +04:00
BX_MEM(0)->init_memory(memSize, hostMemSize);
// First load the system BIOS (VGABIOS loading moved to the vga code)
BX_MEM(0)->load_ROM(SIM->get_param_string(BXPN_ROM_PATH)->getptr(),
SIM->get_param_num(BXPN_ROM_ADDRESS)->get(), 0);
// Then load the optional ROM images
for (i=0; i<BX_N_OPTROM_IMAGES; i++) {
sprintf(pname, "%s.%d", BXPN_OPTROM_BASE, i+1);
base = (bx_list_c*) SIM->get_param(pname);
if (!SIM->get_param_string("file", base)->isempty())
BX_MEM(0)->load_ROM(SIM->get_param_string("file", base)->getptr(),
SIM->get_param_num("address", base)->get(), 2);
}
// Then load the optional RAM images
for (i=0; i<BX_N_OPTRAM_IMAGES; i++) {
sprintf(pname, "%s.%d", BXPN_OPTRAM_BASE, i+1);
base = (bx_list_c*) SIM->get_param(pname);
if (!SIM->get_param_string("file", base)->isempty())
BX_MEM(0)->load_RAM(SIM->get_param_string("file", base)->getptr(),
SIM->get_param_num("address", base)->get());
}
#if BX_SUPPORT_SMP == 0
BX_CPU(0)->initialize();
BX_CPU(0)->sanity_checks();
2006-05-27 19:54:49 +04:00
BX_CPU(0)->register_state();
2008-11-18 23:58:09 +03:00
BX_INSTR_INITIALIZE(0);
#else
bx_cpu_array = new BX_CPU_C_PTR[BX_SMP_PROCESSORS];
for (unsigned i=0; i<BX_SMP_PROCESSORS; i++) {
BX_CPU(i) = new BX_CPU_C(i);
BX_CPU(i)->initialize(); // assign local apic id in 'initialize' method
BX_CPU(i)->sanity_checks();
2006-05-27 19:54:49 +04:00
BX_CPU(i)->register_state();
2008-11-18 23:58:09 +03:00
BX_INSTR_INITIALIZE(i);
}
#endif
Add plugin support to Bochs by merging all the changes from the BRANCH_PLUGINS branch! Authors: Bryce Denney Christophe Bothamy Kevin Lawton (we grabbed a lot of plugin code from plex86) Testing help from: Volker Ruppert Don Becker (Psyon) Jeremy Parsons (Br'fin) The change log is too long to paste in here. To read the change log, do cvs log patches/patch.final-from-BRANCH_PLUGINS.gz All the changes and a detailed description are contained in a patch called patch.final-from-BRANCH_PLUGINS.gz. To look at the complete patch, do cvs upd -r1.1 patches/patch.final-from-BRANCH_PLUGINS.gz Then you will have a local copy of the patch, which you can gunzip and play with however you want. Modified Files: .bochsrc Makefile.in aclocal.m4 bochs.h config.h.in configure configure.in gdbstub.cc logio.cc main.cc pc_system.cc pc_system.h state_file.h bios/Makefile.in bios/rombios.c cpu/Makefile.in cpu/access.cc cpu/apic.cc cpu/arith16.cc cpu/arith32.cc cpu/arith8.cc cpu/cpu.cc cpu/cpu.h cpu/ctrl_xfer32.cc cpu/exception.cc cpu/fetchdecode.cc cpu/fetchdecode64.cc cpu/flag_ctrl.cc cpu/flag_ctrl_pro.cc cpu/init.cc cpu/io.cc cpu/logical16.cc cpu/logical32.cc cpu/logical8.cc cpu/paging.cc cpu/proc_ctrl.cc cpu/protect_ctrl.cc cpu/segment_ctrl_pro.cc cpu/shift16.cc cpu/shift32.cc cpu/stack64.cc cpu/string.cc cpu/tasking.cc debug/Makefile.in debug/dbg_main.cc disasm/Makefile.in doc/docbook/user/user.dbk dynamic/Makefile.in fpu/Makefile.in gui/Makefile.in gui/amigaos.cc gui/beos.cc gui/carbon.cc gui/control.cc gui/control.h gui/gui.cc gui/gui.h gui/keymap.cc gui/keymap.h gui/macintosh.cc gui/nogui.cc gui/rfb.cc gui/sdl.cc gui/sdlkeys.h gui/siminterface.cc gui/siminterface.h gui/term.cc gui/win32.cc gui/wx.cc gui/wxdialog.cc gui/wxdialog.h gui/wxmain.cc gui/wxmain.h gui/x.cc gui/keymaps/sdl-pc-de.map gui/keymaps/sdl-pc-us.map gui/keymaps/x11-pc-de.map instrument/example0/instrument.h instrument/example1/instrument.h instrument/stubs/instrument.cc instrument/stubs/instrument.h iodev/Makefile.in iodev/biosdev.cc iodev/biosdev.h iodev/cdrom.cc iodev/cmos.cc iodev/cmos.h iodev/devices.cc iodev/dma.cc iodev/dma.h iodev/eth_fbsd.cc iodev/eth_linux.cc iodev/eth_null.cc iodev/eth_tap.cc iodev/floppy.cc iodev/floppy.h iodev/guest2host.cc iodev/guest2host.h iodev/harddrv.cc iodev/harddrv.h iodev/iodebug.cc iodev/iodebug.h iodev/iodev.h iodev/keyboard.cc iodev/keyboard.h iodev/ne2k.cc iodev/ne2k.h iodev/parallel.cc iodev/parallel.h iodev/pci.cc iodev/pci.h iodev/pci2isa.cc iodev/pci2isa.h iodev/pic.cc iodev/pic.h iodev/pit.cc iodev/pit.h iodev/pit_wrap.cc iodev/pit_wrap.h iodev/sb16.cc iodev/sb16.h iodev/scancodes.cc iodev/scancodes.h iodev/serial.cc iodev/serial.h iodev/slowdown_timer.cc iodev/slowdown_timer.h iodev/unmapped.cc iodev/unmapped.h iodev/vga.cc iodev/vga.h memory/Makefile.in memory/memory.cc memory/memory.h memory/misc_mem.cc misc/bximage.c misc/niclist.c Added Files: README-plugins extplugin.h ltdl.c ltdl.h ltdlconf.h.in ltmain.sh plugin.cc plugin.h
2002-10-25 01:07:56 +04:00
DEV_init_devices();
// unload optional plugins which are unused and marked for removal
SIM->opt_plugin_ctrl("*", 0);
2006-05-27 19:54:49 +04:00
bx_pc_system.register_state();
DEV_register_state();
if (!SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
bx_set_log_actions_by_device(1);
}
// will enable A20 line and reset CPU and devices
bx_pc_system.Reset(BX_RESET_HARDWARE);
if (SIM->get_param_bool(BXPN_RESTORE_FLAG)->get()) {
if (SIM->restore_hardware()) {
if (!SIM->restore_logopts()) {
BX_PANIC(("cannot restore log options"));
SIM->get_param_bool(BXPN_RESTORE_FLAG)->set(0);
}
bx_sr_after_restore_state();
} else {
BX_PANIC(("cannot restore hardware state"));
SIM->get_param_bool(BXPN_RESTORE_FLAG)->set(0);
}
}
bx_gui->init_signal_handlers();
bx_pc_system.start_timers();
BX_DEBUG(("bx_init_hardware is setting signal handlers"));
// if not using debugger, then we can take control of SIGINT.
#if !BX_DEBUGGER
signal(SIGINT, bx_signal_handler);
#endif
#if BX_SHOW_IPS
#if !defined(WIN32)
if (!SIM->is_wx_selected()) {
signal(SIGALRM, bx_signal_handler);
alarm(1);
}
#endif
#endif
}
void bx_init_bx_dbg(void)
{
#if BX_DEBUGGER
bx_dbg_init_infile();
#endif
memset(&bx_dbg, 0, sizeof(bx_debug_t));
}
int bx_atexit(void)
{
if (!SIM->get_init_done()) return 1; // protect from reentry
// in case we ended up in simulation mode, change back to config mode
// so that the user can see any messages left behind on the console.
SIM->set_display_mode(DISP_MODE_CONFIG);
#if BX_DEBUGGER == 0
if (SIM && SIM->get_init_done()) {
for (int cpu=0; cpu<BX_SMP_PROCESSORS; cpu++)
2007-10-25 03:29:40 +04:00
#if BX_SUPPORT_SMP
if (BX_CPU(cpu))
#endif
BX_CPU(cpu)->atexit();
}
#endif
BX_MEM(0)->cleanup_memory();
bx_pc_system.exit();
// restore signal handling to defaults
#if BX_DEBUGGER == 0
BX_INFO(("restoring default signal behavior"));
signal(SIGINT, SIG_DFL);
#endif
#if BX_SHOW_IPS
#if !defined(__MINGW32__) && !defined(_MSC_VER)
if (!SIM->is_wx_selected()) {
alarm(0);
signal(SIGALRM, SIG_DFL);
}
#endif
#endif
SIM->cleanup_save_restore();
SIM->cleanup_statistics();
SIM->set_init_done(0);
return 0;
}
#if BX_SHOW_IPS
void bx_show_ips_handler(void)
{
static Bit64u ticks_count = 0;
static Bit64u counts = 0;
// amount of system ticks passed from last time the handler was called
Bit64u ips_count = bx_pc_system.time_ticks() - ticks_count;
if (ips_count) {
bx_gui->show_ips((Bit32u) ips_count);
ticks_count = bx_pc_system.time_ticks();
counts++;
if (bx_dbg.print_timestamps) {
printf("IPS: %u\taverage = %u\t\t(%us)\n",
(unsigned) ips_count, (unsigned) (ticks_count/counts), (unsigned) counts);
fflush(stdout);
}
}
return;
}
#endif
void CDECL bx_signal_handler(int signum)
{
// in a multithreaded environment, a signal such as SIGINT can be sent to all
// threads. This function is only intended to handle signals in the
// simulator thread. It will simply return if called from any other thread.
// Otherwise the BX_PANIC() below can be called in multiple threads at
// once, leading to multiple threads trying to display a dialog box,
// leading to GUI deadlock.
if (!SIM->is_sim_thread()) {
BX_INFO(("bx_signal_handler: ignored sig %d because it wasn't called from the simulator thread", signum));
return;
}
#if BX_GUI_SIGHANDLER
if (bx_gui_sighandler) {
// GUI signal handler gets first priority, if the mask says it's wanted
if ((1<<signum) & bx_gui->get_sighandler_mask()) {
bx_gui->sighandler(signum);
return;
}
}
#endif
#if BX_SHOW_IPS
if (signum == SIGALRM) {
bx_show_ips_handler();
#if !defined(WIN32)
if (!SIM->is_wx_selected()) {
signal(SIGALRM, bx_signal_handler);
alarm(1);
}
#endif
return;
}
#endif
#if BX_GUI_SIGHANDLER
if (bx_gui_sighandler) {
if ((1<<signum) & bx_gui->get_sighandler_mask()) {
bx_gui->sighandler(signum);
return;
}
}
#endif
BX_PANIC(("SIGNAL %u caught", signum));
}