It is now declared with architecture x86_gcc2, though it probably
has been built with gcc4. That issue has to be solved for real
eventually, since the package resolver won't allow mixing of gcc2
and gcc4 packages.
It's sufficient to simply check if the gcc version is 4 or higher since
we enforce the use of the latest ported compiler for the build anyways,
and these multi-level checks would fail in their current state if gcc
moved to e.g. version 5.0.
Added the optional package for system sounds that
were collected for GCI 2012. Also added the demo
packges to the "contents" at the top of OptionalPackages.
* Tried to use EFI::Header class, but there doesn't seem to be an easy
way to actually hit the disk -- which we'll have to do to find out
how large the GPT table is.
* Initialization of GPT disks is now working which is why I added the disk
system add-on to the image. However, there is a caveat, as the backup
header and table aren't written yet.
* Partitions can be deleted.
* Creating partitions does not work yet, but I don't know yet why; in
theory it could already work.
..and Haiku64Image. While I'm at it split the commands so each letter
in the alphabet gets it's own line(s). This will make these kinds of
changes more atomic in the future.
* Version of Vim package for x86_64 added;
* Version of KeymapSwitcher package for x86_64 added;
* KeymapSwitcher package fixed to preserve Cmd <-> Ctrl swap settings on
keymaps switch. Fixes#9142;
* UnRAR updated from 3.7.8 to 4.2.4, fixed for multibyte characters
support and build for x86_64. Partially fixes#4879;
If no hrev tags are found the revision is blank and shows up as
0 in About System. This commit updates the revision function so that
it falls back to the current short hash instead. Only affects devel
builds and only if you've deleted your tags.
* Try to keep each renderer designed
the same.
* swrast will build... swpipe won't
build until we have an llvm build
package. (should in a few days once
llvm 3.2 is released)
* libmesa and libgallium no longer live in libGL
* opengl kit gets libglapi for dispatch
* swrast will get libmesa
* swpipe will get libmesagallium + gallium drivers + llvm
Work I did at Begeistert, trying to use the new driver manager and
detecting display controls. It should probably be a good example of
how a new driver is built. It currently loads and detects
display controls correctly but doesn't do any actual work yet.
Not sure when I have the time to finish the driver, it shouldn't be
that hard but I currently have have other priorities. Feel free to
work on it in the meantime.
Got rid of X86_ONLY and friends in HaikuImage, FloppyBootImage, etc.
Instead we use build feature specification annotated lists with
FFilterByBuildFeatures (either explicitly or implicitly where passing
the list directly to the image rules).
I just translated the variables to the respective annotatation in most
cases, though in some cases different annotation would be more correct
(e.g. for the OpenGL stuff).
Provides a simple framework for addressing #3798. The interested reader
may add the build features and add/adjust the annotations accordingly.
An archive (ramfs) to be loaded can be specified in the raspberry pi
config.txt with a certain base address. We can use this to put our
floppy boot archive into memory on startup.
During the start procedure we now map that archive so we can later
load the kernel from it.
* As of Mesa3D 9.0+, GLU is a seperate project
* Our in-tree GLUT builds with GLU-9.0 without
modification.
* We ignore the GLU libraries that Mesa-7.8.2 and
Mesa-8.1-devel provide and use the glu-9.0 ones
* This is kind of a limbo state, but works for now.
* Eventually we will be on Mesa 9.0 (which requires
the external GLU) and Mesa 7.8.2 (which works with
the newer external GLU) and will rip GLU out of the
7.8.2 OptionalBuildPackage.
* I don't *think* we are using the Mesa GLU headers...
we will know for sure when I pull'em out of the
OptionalBuildPackages :D
Currently hardcoded to Verdex target. Code prepared to pick up configuration
details from FDT when implemented. Only enabled in FloppyImage for ARM.
This actually enables the kernel to read the content of the image file
passed using the "-pflash" parameter to QEMU....
* Fixed issue with unwanted keymap switching in case UnZip started in
* background (expanding optional packages during Haiku build, for
* example). UnZip executable has no background application flag
* for unknown reason.
+alpha4
Introduce HAIKU_DOWNLOAD_CACHE variable that can point to a directory.
containing optional packages to check first before downloading.
Missing packages are also added to the cache.
This allows sharing and reusing them to make builds without a connection.
* Puri wouldn't work after the update to libpng 1.5
* It was still looking for libpng.so.1.4
* Not intended for r1alpha4 branch, as it's still on libpng 1.4
* These were updated again due to recent changes to the buildtools
* Packages are based on btrev43045, whereas the previous set was based on btrev43040
+alpha 4 (GCC2 package needed to match recent date versioning change to configure script)
* This package is current as of btrev43040
* Primarily did this rebuild to assure the GCC4 package was made with the latest buildtool sources
* This invalidates the need to cherry pick hrev44704 for R1A4
+alpha4
* This package is smaller in size than the previous due to the fix in btrev43038
* This package addresses issue building code with SSP due to fix in btrev43039
* This commit along with btrev43039 fixes#8931
+alpha4 (and hopefully last update to GCC before R1A4 release)
Setting 'HAIKU_STRIP_DEBUG_FROM_OPTIONAL_PACKAGES = 1' will enable the
mechanism. By default all packages will be stripped. Passing anything
other than '1' or 'true' in the InstallOptionalHaikuImagePackage call
will disable it for a particular package.
* added optional feature package for libpng 1.5.12 gcc4/gcc2 x86 and ppc
* drop libpng sources and headers from the tree.
* added optional feature package for jpeg 8d gcc4/gcc2 x86 and ppc
* drop jpeg sources and headers from the tree.
The original package was cross-compiled to Haiku, turns out flex's
build system uses paths to stuff from the host system, so the package
was broken. Rebuilt from Haiku.
Added autoconf, automake, libtool, texinfo, perl, gettext and nano.
Building an image with the nightly targets should give you an image
with these included.
This adds some of the development packages for x86_64. All of the
DevelopmentBase packages (gcc, make, jam, bison, flex, m4, mkdepend)
have been built and uploaded.
* made private Catalog.h header public by moving it to
os/locale/tools/CollectingCatalog.h
* reintroduce B_COLLECTING_CATKEYS define (which is expected to be set
during a collectcatkeys session) in order to decide whether or not
to automatically include the CollecingCatalog.h header from Catalog.h
* adjust jam rule for collecting catalog keys accordingly
Turns out that libgcc is needed, for some reason building the kernel
with -O0 does not end up referencing libgcc but -O2 does. A separate
build of it is done with -mno-red-zone, same reason as for libsupc++.
Ended up being easy to rebuild with different CFLAGS: previously I'd
tried doing `CFLAGS="-mno-red-zone" make` in the libgcc dir which
didn't override, the correct way is `make CFLAGS="-mno-red-zone"`
Kernel mode code on x86_64 needs to be built with -mno-red-zone as
interrupts would corrupt the red zone if it were in use. However, the
kernel is linked with libsupc++, which was not compiled with
-mno-red-zone. If an interrupt occurred in libsupc++ code the red zone
would get corrupted. This was causing random panics, particularly under
heavy system load. Therefore, on x86_64 a separate build of libsupc++
with -mno-red-zone is now done for the kernel to use. Note: this commit
will require a rerun of configure and rebuild of cross tools.
This reverts commit 14b654326d.
Unfortunately that changeset causes a regression on GCC 2, which
makes playback of (some?) video impossible. This is due to Libavcodec
being miscompiled, which requires gcc >= 4.2
Resolves the regression of #8856, but does not fix the root issue.
* Various compilation fixes.
* Fixes to the FreeBSD compatibility layer (from comparing the x86-
specific bits with the equivalent amd64 sources in FreeBSD).
* Compile all the Ethernet drivers except for sis900 and wb840, these
require a bit more work to fix (will file a ticket soon). Tested
ipro1000 and rtl81xx, no issues.
Some preference apps, mount_server and AboutSystem. Removed the check
for x86_64 in the boot script, the normal path through the script will
work now. Also removed a temporary hack to workaround AboutSystem not
being there in build_haiku_image.
As mentioned in one of the previous commits, breakpoints don't work
properly yet, and I haven't done much extensive testing yet, but the
basic functionality works.
With this commit, app_server now compiles and runs at boot! Nothing
particularly interesting happens, just the blue background and a mouse
pointer. Remote backends are broken and not compiled in, see #8834.
Note that it won't be possible to build this quite yet, need to get
the FreeType package uploaded.
This module provides an interface for drivers to use to perform calls
to the BIOS (only really for use by graphics drivers which need to use
the VESA BIOS). It uses the x86emu library from X.org which emulates
a real mode x86 CPU. This is necessary for x86_64 as virtual 8086 mode
no longer exists there.
* This puts the registers in a better state and ensures
all model dependant defines are prefixed with card series
* Consolidate evergreen defines into single header
The boot script now launches consoled instead if app_server does not
exist, so there is now an interactive Bash prompt! libbe requires ICU,
which is an optional package, so I've built the packages and they've
been uploaded to haiku-files.org (thanks umccullough).
GCC 2 built for OS X 10.7/10.8 was broken, the Haiku build would fail
with some strange errors. Forcing compilation of GCC 2 in 32-bit mode
results in a working GCC.
* Added x86_64 linker script and relocation code.
* Some 64-bit safety fixes to the heap code.
* Added runtime_loader, libroot and bash to the x86_64 image. The boot
script will be launched, but will panic shortly after because fork
is broken.
Added a temporary Haiku64Image file that gets included instead of
HaikuImage when building for x86_64, which I will add to as I port
stuff. Images currently only include the boot loader, kernel and
a bunch of add-ons.
This adds disk drivers, intel/session partitioning systems, and ISO9660
(+ write/attribute_overlay) modules to the CD/floppy boot image targets
for x86_64. The kernel now detects and mounts the boot CD, and runs up
to attempting to start the boot script.
Uses the x86 architecture code, made fixes to printf formats and a
couple of 64-bit fixes. Only potentially intrusive change is that I've
changed PCI.h to use uint32 rather than ulong. I don't see any way
this would cause any issues, though.
- The cdrecord port was using the wrong path for searching for SCSI
devices. This led to it failing to find SATA CD drives. Updated
package by Chris Roberts.
Added the necessary build flags for modules, and added a module (dpc)
to the floppy image for x86_64 builds for testing purposes. The module
gets loaded correctly and its code runs without issue. Only non-trivial
addition is the different method for generating kernel.so, this is
explained in the kernel Jamfile.
* Add WebKit optional package.
* Make WebKit a dependency of WebPositive
* Enable building of WebPositive from source.
Note: WebKit currently expands to lib/. Alternative gcc-subdirectories
are not taken into consideration. Though it is trivial to change.
* Use gcc and g++ rather than cc and c++, as the latter now point to
clang with recent Xcode versions and compilation of the host tools
fail for various reasons with it.
* Replace the case-sensitive filesystem check with a more basic one,
as diskutil no longer supports the behaviour of getting info for the
volume that any path is on.
* Updated ReadMe with a correct list of prerequisites for OS X.
* GCC 2 builds are still broken due to a strange error that only
occurs with a GCC 2 built on OS X 10.7
Will be merged with the x86 one later on. Requires -fno-omit-frame-pointer on
the kernel build flags, GCC defaults to not generating stack frames on x86_64.
Since x86 and x86_64 share a lot of common code, x86_64 kernel sources/headers
are going to reside under headers/private/kernel/arch/x86 and
src/system/kernel/arch/x86 along with the existing x86 code. This commit
changes the build system to handle this. A new variable, TARGET_KERNEL_ARCH,
has been added. This is the name of the kernel/boot architecture directory
name, set to x86 on both x86 and x86_64. This is now used in all places where
TARGET_ARCH was used to get to kernel arch sources/headers (I've changed
everything necessary as far as I can tell). Kernel won't build for x86_64
at the moment as the sources have not been merged, loader does.
* platform_allocate_elf_region() is removed, it is implemented in platform-
independent code now (ELF*Class::AllocateRegion). For ELF64 it is now
assumed that 64-bit addresses are mapped in the loader's 32-bit address space
as (address - KERNEL_BASE_64BIT + KERNEL_BASE).
* mapped_delta field from preloaded_*_image removed, now handled compile-time
using the ELF*Class::Map method.
* Also link the kernel with -z max-page-size=0x1000, removes the need for
2MB alignment on the data segment (not going to map the kernel with large
pages for the time being).
* set_haiku_revision doesn't currently support ELF64, don't use a
revisioned kernel image on x86_64 for now.
* Don't try to build add-ons for x86_64 yet.
The red zone is a 128-byte area below the stack pointer specified by the
AMD64 ABI that can be used by leaf functions for their stack frame without
modifying the stack pointer. It is guaranteed not to be modified by signal
handlers. This cannot be used in kernel mode code, as an interrupt handler
could overwrite it, so stop GCC from generating code that uses it.
* our current gcc can't be built with multilib for ppc anyway,
* this allows going further on real hardware, though dprintf() sends wrong data to the serial port.
* x86_64 is using the existing *_ia32 boot platforms.
* Special flags are required when compiling the loader to get GCC to compile
32-bit code. This adds a new set of rules for compiling boot code rather
than using the kernel rules, which compile using the necessary flags.
* Some x86_64 private headers have been stubbed by #include'ing the x86
versions. These will be replaced later.
* since we include BoardSetup earlier now, the TARGET_* flags were discarded. Use HAIKU_* instead.
* Add variables to hold the default entry point and the desired uimage OS emulation.
* Pi firmware was updated to note that Broadcom
had to be included with firmware blobs.
* While we have permission from Eben to have the
blobs in-tree, they are now offically on github
in a fixed location removing the need to have
these in-tree.
* Clean up BoardConfig, note firmware URL and
files needed
* Update info.txt with how Haiku boot process works
* while it seemed to work before, BuildSetup was actually adding includes from the default boot platform, before BoardSetup had a chance of changing it.
* Thanks go out to Simon Arlott for replacing
the first32k.bin blob with assembly removing
the need for first32k.bin hack.
* This assembly is a modified version removing
the Linux kernel boot args.
* haiku_loader renamed to kernel.img will boot
on Raspberry Pi directly.
* move versions of the B_TRANSLATE_...-macros used during collecting
of catalog keys to a specific header file, which will only be picked
up when running collectcatkeys
* fix a couple of build problems during the preprocessing of the libbe-
sources when extracting catalog keys, all due to private headers not
being found
* move ZombieReplicantView.h from kits/interface to
headers/private/interface, as this way it can be picked up when
building the libbe catalog
* Rename 3D Rendering to GL Info
* Moved it in the source tree from src/preferences/3drendering/
to src/tests/kits/opengl/glinfo/
* Moved in HaikuImage from SYSTEM_PREFERENCES to SYSTEM_APPS
* Does not show up in DESKBAR_APPLICATIONS like AboutSystem
but can be found in the resulting image in /boot/system/apps/
This appears to be a problem with GCC's build system: it defaults to having
multilib enabled, but if it is explicitly enabled with --enable-multilib,
the build fails.
Signed-off-by: Ingo Weinhold <ingo_weinhold@gmx.de>
* Make the locale kit a part of libbe.
* Drop the LocaleBackend kludge used from within libbe (and from
other places, too) in order to access system catalog strings.
This is now done via gSystemCatalog, which is provided and initialized
by libbe.
* Drop all references to liblocale.so from all Jamfiles.
* Add legacy symlink liblocale.so in order to keep optional packages
that rely on it in a working state.
TODO: the documentation hasn't been updated.
* as pointed out by diver: libgutenberg has been configured to
expect its data files in /system/data, but we used to install them
into common.
This way, the Gutenberg printer add-on actually shows some printers.
- Fixes a problem in Web+'s autocompletion handler that would
result in it eating things like workspace switching shortcuts
if Web+'s URL input had focus.
* The sources are unchanged, and most of it doesn't follow Haiku's coding
style -- stuff that I updated over the years might also have seen a coding
style update.
* This was also the basis on which Haiku's BFS has been written.
* In the long run, the stuff in 'lib' that is already part of BFS should
be removed, and used directly from BFS itself.
* I haven't yet added any other of the tools to the image. Not sure if they
are ready for inclusion yet; 'recover' could also be renamed to reflect that
it is BFS specific.
* Not sure where this optional package went however
it is no longer on haiku-files.org
* A newer speex package does exist however.
* Should fix#8371
* If this doesn't work speex (and maybe sdl) optional
packages need rebuilt
* haiku-devlibs-ppc-gcc4 zip archive contains libroot and glue (but no stdc++).
* fixed /boot/develop/lib/$arch symlink to point to the right dir instead of current.
* setgcc now handles the ppc arch and updates the arch link /boot/develop/lib.
* added optional feature package for freetype 2.4.6 gcc4/gcc2 x86 and gcc4 ppc.
* FT_CONFIG_OPTION_SUBPIXEL_RENDERING is disabled, --include-patented-code doesn't
change this setting anymore. This would require different packages.
* drop freetype sources and headers from the tree.
* fix decorators, test app server and appearance to use feature package headers.
* hybrid build untested.
* added optional feature package for ffmpeg 0.10 gcc4 and gcc2
* increased probe buffer size to 8K for now.
* built the optional packages the default way, it might need adjustments
like dependencies on speex, ogg, theora, vorbis, which I left out for now.
* Version 17-02-2012
* Used to initialize the Raspberry Pi GPU and boot it
* License is permissive, I've also included the
confirmation email on this license.
* Little bootloader documentation.
* Still nothing to get excited about, preliminary.
* Move to new mesa optional package whih build options:
-march=i586 -mtune=i686 -mmmx (removing all -msse*)
* SSE asm still executes based on CPU flags
* Fixes blocker #8318
This package contains only the app + libs. The certificate file
is satisfied through OptionalPackageDependencies. The bookmarks
have been moved (and updated) to a separate archive.
Thanks Rene Gollent and Chris Roberts for the help!
This group of changesets should close#7707, though it is possible
that other optional-packages, pre-built software will still fail to
locate the certificates file in the new location.
Via a cron script, www.haiku-files.org will automatically create a new package
from http://curl.haxx.se/ca/cacert.pem. This new package satisfies our
OpenSSL's expectations of where the certificate file lives. It also ensures
that new builds of Haiku will have the newest certificate file. As an example,
the cacert.pem included in Web+ was from Sept-2009.
Updated builds of Curl and Web+ to follow.
* Prevent trademark issues with "OpenGL" text.
* Rename OpenGL preference pane "3D Rendering"
* Update catkeys
* Add a better image to 3D Rendering preferences
(we can change this if there are objections, just
trying to pretty the pane up a little)
* Use non-debug version which is a *lot* smaller
* Represents bug fixes to Mesa under Haiku, x86
assembly + sse is now used with swrast.
* Remove state.h requirement as I can't find anything
that actually uses it.
* Move compiled binaries into lib.haiku within Mesa optional
pacakge, this enables us to use Make or scons to build Mesa
* Untangle libGL linking and order library inclusion
* Remove zmuldef hacks
* Compile libgallium into the libGL on Mesa 8.0 / gcc4 images
* Don't Mesa calculate cpu optimizations due to visibility
issues, use Mesa cpu functions for this.
* Don't allow undefined symbols in libGL.so to ensure sanity.
* Move Mesa optional packages to haiku-files
* Implemented writembr tool used to update MBR area with easy boot
loader starting the system from currently active partition;
* This work fixes#5595;
* This is result of GCI2011 task.
Signed-off-by: Siarzhuk Zharski <zharik@gmx.li>
At least this should fix other platform builds to the point they worked before.
The ICU_DEVEL zip name assign was moved inside the if block, making it empty for other archs, and ExtractArchive was of course having issues with this.
So I moved the rest inside the if block as well. Should fix at least kernel builds.
Note:
As InvokeSubJam invokes a jam process separate from the first, JAMJOBS may
result in up to 2 * n - 1 jobs in total being run. While this is not accurate,
it is a better scenario than only a single job running.
* provide separate icu-devel packages for x86/gcc{2,4} and ppc, in
order to bypass problems with this package trying to make use of
the /boot/develop/abi/current symlink.
* Support for bitmap and vector icons added;
* Attribute type representation is improved;
* Fixed problem with current attributes loading;
* sniffer rule checking fixed;
* supress useless lines in -dumpIcons and -dumpSniffRules for MIME types
without icons and sniffer rules correspondently.
Signed-off-by: Siarzhuk Zharski <zharik@gmx.li>
* make room in mbstate_t for containing an ICU-converter's state
(well, in fact the whole converter object)
* adjust libroot's locale add-on to clone converters into a given
mbstate_t directly
* adjust ICUThreadLocalStorageValue to contain the converter pointer
instead of a converter-ID (if the converter is related to an
mbstate_t, it points into the mbstate_t).
* adjust users of converters to directly use converter pointers
instead of ICUConverterRef
* drop now unused ICUConverterManager and ICUConverterRef
* update gcc4 optional package
This brings our multibyte implementation into a fully working state,
both non-ascii and non-8-bit characters can now be handled normally
in the Terminal, i.e. this finally fixes#6276.
N.B.: Since the size of mbstate_t has changed, everything (including
the compiler!) needs to be rebuilt.
This allows to use the debug features of the guarded heap also on
allocations made through the object cache API. This is obivously
horrible for performance and uses up huge amounts of memory, so the
initial and grow sizes are adjusted accordingly.
Note that this is a rather simple hack, using the object_cache pointer
to transport the allocation size. The alignment is neglected completely.
This is a very simple heap implementation that allocates memory so that
the end of each allocation always coincides with a page end and is
followed by a guard page which is marked non-present. Out of bounds
access (both read and write) therefore cause a crash (unhandled page
fault).
Note that this allocator is neither speed nor space efficient, indeed it
wastes huge amounts of pages and address space so it is quite easy to
hit limits. It is intended as a pure debug feature.
* instead of in /boot/home/config/settings/be, the compatibility
link has to live directly in the config folder, as otherwise
it doesn't help compatibility-wise at all ;-)
Package management will move the directory from common/etc to
common/settings/etc. The kernel side change that sets up the etc symlink
in the rootfs was already commited, everything still installs into the
old dir however. This symlink makes things that depend on /etc work for
now and can be removed once the files aren't populated to the old place
anymore.
* uncomment the building of libroot_build.a again
* add function remapper to HOST_STATIC_LIBROOT
* drop TODO about the function remapper not working with the static
libroot
Ingo: please review - I think this should work, but I'm not so sure
where HOST_STATIC_LIBROOT should be in the list of libraries of its
only user (<build>bfs_fuse): where it is now or right at the end?
As it is now, the resulting binary still contains references to
host-libc-implementations of close() & others, which are triggered by
the other libs (like libfuse.so). If I put HOST_STATIC_LIBROOT right at
the end, those references are gone, though. But which is correct?
This makes opening symlinks work universally in the build system tools.
Two mechanisms have been implemented, both of which don't always work.
The first is remapping via preprocessor macros. This fails where equally
named methods are used (e.g. STL fstream::open()). The other is using
hidden functions in the new libroot_build_function_remapper.a that is
linked into everything that is linked against libroot_build.so. This one
fails for functions that are defined inline in headers (Linux/glibc does
that). Together they seem to cover our build system needs ATM.
Bring the changes that aren't package management related and the ones
that are but don't take effect as long as they are ignored by the build
system into the master.
Summary of changes:
* Introduce private header <directories.h> with constants for a good
deal of paths that should usually be retrieved via find_directory().
* Replace hard-coded paths by using find_directory() or the
<directories.h> constants (e.g. in drivers and the kernel).
* Add find_directory() constants needed for package management.
* Add __HAIKU_ABI_NAME and B_HAIKU_ABI_NAME macros.
* src/apps/deskbar: BeMenu.* -> DeskbarMenu.*,
DeskBarUtils.* -> DeskbarUtils.*
* Change deskbar menu settings directory from ~/config/be to
~/config/settings/deskbar.
* Other smaller cleanups, changes, and fixes.
* Apparently caused by the fact that we no longer run fixincludes,
math.h is not being generated anymore. I haven't removed the rm
from the script in order to be compatible with older compilers.
As PulkoMandy pointed out on IRC, darwin10 and 11 (10.6 and 10.7) are at least partially 64bit, so
the test only applies there. When darwin12 comes out it'll have to be fixed.
* Resolve TODO: HOST_GCC_BASE_FLAGS should not be included in
HOST_LDFLAGS. Enable adding "-fno-strict-aliasing -fno-tree-vrp"
accordingly.
* Fix handling of HOST_PLATFORM_IS_64_BIT and HAIKU_HOST_USE_32BIT: The
former does now state whether the platform is effectively treated as
64 bit platform, i.e. it actually is 64 bit and the 32 bit mode is
not enforced. HAIKU_HOST_USE_32BIT is now only set when the platform
is actually 64 bit, but 32 bit mode is enforced.
* Map build variables HOST_CPU and HOST_ARCH to x86_64, if it they are
* x86 and
64 bit and define the __x86_64__ C macro instead of __INTEL__ in that
case.
* <OS.h>: Also handle __x86_64__.
* ensure host isn't darwin as Apple doesn't use binutils
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@43202 a95241bf-73f2-0310-859d-f6bbb57e9c96
