* Also drop unused vblank semaphore storage
* Spotted by X512. These are from intel_extreme
which was used as a base *ages* ago.
Change-Id: I2a6baaa4849baeb8c8cf10e2046d0fbe10c3a356
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5389
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
this needed for dp aux before skylake, only for DP A (eDP).
should help with #17771
Change-Id: I4bdcca1fdc05294fb5b56c5c96164b6936a5881e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5355
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
* also uses the BAR size when dumping regs (as done by the intel_reg tool).
Change-Id: Ie29768afc8f9c42bb9a03b2866db34c4b0e43b7d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5334
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
hraw_clock is possibly dynamic, but for the usecase this seems good enough.
Tested on SandyBridge and Haswell laptops.
Change-Id: I045b3c03f6b37bbffb3d8688658ffaa2a97311ae
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5319
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* also handle dp aux on PCH.
* tested on Gen7, should work from Gen6.
Change-Id: I8d99bcdc10c817e66441a6a644df490dd988a74d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5290
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
we enable every port interrupt instead of relying on the ports found in the VBT.
ATM only log the plug state when it changes.
Change-Id: I5175fb137d11f0114beb2915a4f363341cfe8e36
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5287
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
* BDB version from 111
* for DDI from Gen9
* for HDMI and DisplayPort from Gen6
* use the first port to create the mode list
* also probe DDI Port A
* the aux channel helps to select the correct dp aux registers.
Change-Id: I80549a6ec0477bed768cc5f388959b606d50c1b7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5286
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
This assumes a Gen9 or Gen11 configuration, and aux channel 0. As a result, the same EDID will
be found for every DDI port. The mapping should be found in the VBT.
Tested on KabyLake and JasperLake
Change-Id: I27f5ac8ec8e6ba519fbe9aaf745e78a7361175b9
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5175
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
- Newer devices use a different layout for the backlight PWM registers
- Get the min brightness level from the BDB
Change-Id: I99745a022dd38733a4c2386f91c4c57016dd2acd
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5162
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Internal display on my laptop isn't detected yet so modesetting doesn't
work, but at least I get vblank interrupts and backlight control.
Fixes#17569
Change-Id: I86dd56bc3fc2c288688242e34d9220028036ab74
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5156
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Get the OEM string from the VESA info block (and also get the memory
size from there while we are at it). If the string is empty, use the
BIOS type (identified in other ways) to still report something.
Change-Id: I8cbd75d19f624a43db05e82d1e1b2a536cc418b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4625
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The VESA standard does not define any way for software to set a custom
video mode, which means normally we would be constrained to whichever
modes the video card manufacturer decided to provide. However, since we
run the BIOS in an emulated environment, it is possible (and even quite
easy) to patch it and inject any video mode we want, provided we know
the format to use and where to put the info in.
This approach was used in the NewOS VESA driver, as well as in
915resolution (a tool that predates the availability of native drivers
for Linux for Intel videocards). Later on it was also used in Chameleon
and Clover, bootloaders that are used for hackintoshes (running MacOS on
unsupported hardware).
This commit implements full support for Intel cards only, AMD and NVidia
will be added later (but there is preliminary code to detect them)
Change-Id: I2c528ba18b3863f486da694860a10761efcbfb3f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4624
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* We pack the first 8 bits into a union for the raw
edid since alignment matters.
* Handing the raw_edid is a bit ugly, so in the edid struct
we drop the input_type from the union since packing doesn't
matter as much.
Change-Id: I32dbfe9484f9eb83cf491a44d30a32ca36d65b7b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4775
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
In most cases we don't need to use the complete display_mode struct and
we just need the timings. This will avoid future confusion between the
virtual width/height and the actual display timings, if we implement
scrolling someday.
Change-Id: I6c4430b84130b956a47ea0a01afb0843f5a34fd2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4665
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This cuts out almost 40,000 lines of these headers. (I did something similar
in the atheroswifi AR93xx/94xx driver when importing it from FreeBSD,
which had a lot more than 40,000 lines.)
