* Implemented MakeSpace() (not yet tested).
* Changed intel_wait_engine_idle() to spin() between reads and to timeout
after 1 second of waiting (could probably be done way earlier).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23120 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Therefore, I've added an I/O control that let's it update the boot block
part of this block, so that makebootable can use it on a mounted volume
(this will probably be moved into a disk system API later).
* Added user_memcpy() to the fs_shell.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23082 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit status of (non-main) threads of a team. Fixes bug #1644.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23009 a95241bf-73f2-0310-859d-f6bbb57e9c96
passes that information on to the kernel. This should fix wrong bytes per row with
certain resolutions and graphics cards.
* The boot loader now recognizes 15 bit modes that are advertised as 16 bit modes.
This should fix wrong colors in 16 bit modes on some cards.
* Reenabled setting MTRR for VESA mode - don't remember why I disabled it, but it
works fine on my test machines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23006 a95241bf-73f2-0310-859d-f6bbb57e9c96
serial output, and puts it into the new kernel_args::debug_output field.
* syslog_init() will now check if there is anything in kernel_args::debug_output
and will put that into the syslog buffer.
* dump_block() now also prints an offset.
* Fixed warning in mmu.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The debug_server now sends the registrar messages whenever the debug alert
is shown, and also, if the user wants to debug the team.
* In the latter case, the registrar will now cancel a shutdown process.
* Also, it will now wait with the shutdown process until the user has
acknowledged the debugger alert.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22926 a95241bf-73f2-0310-859d-f6bbb57e9c96
* it now updates the partition data,
* the flags,
* and the disk geometry - and that now allows the session add-on to actually
detect a newly inserted CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22918 a95241bf-73f2-0310-859d-f6bbb57e9c96
the complete extent info or not.
* file_map_translate() now cuts down the request to the file bounds.
* Adjusted BFS and FAT to the API changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22913 a95241bf-73f2-0310-859d-f6bbb57e9c96
device geometry.
* If SetTo() reports no media, and GetGeometry() fails, the device geometry
is now reset as well.
* KDiskDeviceManager::_ScanPartition() no longer unmarks the partition busy;
this is now done by the caller, and done independently from the outcome of
_ScanPartition(). This also fixes the problem that devices with no media
were never marked unbusy (and thus were ignored subsequently).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added vfs_unmount(), which allows unmounting by dev_t (used by the DDM).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22910 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Unmount when uninitializing a partition.
* Finished the media checker implementation, i.e. we rescan when a media
was inserted and uninitialize when ejected.
* Turned the disk device media checker from a kernel daemon into a thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22909 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
system by pretty name (not only module name) now.
* _user_initialize_partition() loads the disk system by pretty name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22880 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually forgot to commit the changes I made to the ide_adapter...
* the IDE bus master command/status stuff is now used via flags; it's no
bitfield anymore.
* Changed a few constants to upper case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22842 a95241bf-73f2-0310-859d-f6bbb57e9c96
K{Disk,File,Partitioning}System writing methods. It is now required
that the caller has marked the concerned partitions busy, hence we can
(read-)access them without needing a lock. The module interfaces will
will be changed to take advantage of the fact as well. The methods take a
disk_job_id instead of a KDiskDeviceJob* now, though I haven't quite
decided, whether we need it at all or just want to add a special
handling in the cases where notifications during the operation make
sense.
* Reimplemented the disk device write support syscalls (save
_user_move_partition() for which other module hooks are needed). They
call the KDiskSystem methods, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22832 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
synchronous scanning is supported.
* Removed the disk device job support from the disk device manager.
* K{Disk,File,Partitioning}System:
- Remove querying and validation methods.
- Commented out the modification methods until their fate is decided.
* Removed obsolete _user_get_partitionable_spaces().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22799 a95241bf-73f2-0310-859d-f6bbb57e9c96
(_kern_{supports,validate}_*(), etc.).
* Adjusted the prototypes of the disk device modification syscalls.
Commented out their implementations for the time -- they'll mostly
have to be rewritten completely.
* Implemented the userland disk device jobs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22781 a95241bf-73f2-0310-859d-f6bbb57e9c96
acceleration works fine, but overlay doesn't - that's next on my list.
Turns out the i965 differentiates between RGB-32 and RGB-32-alpha, and
didn't like trying to use the latter as display mode (the i865 didn't
care at all)... finding that took me *way* too long, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22780 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing job classes (they don't do anything yet, though) and
completed the implementation of the job generator.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22767 a95241bf-73f2-0310-859d-f6bbb57e9c96
We will use SRP (supervisor root pointer) register to hold the current thread pointer.
Its use by the pmmu is optional and I don't plan on using it.
There are 32 other bits left.
Wonder if weshouldn't use it for system_time() instead... will see, but there are no other usable regs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22696 a95241bf-73f2-0310-859d-f6bbb57e9c96
next/prev link order - that messed up the DoublyLinkedListCLink adapter.
* Since it's more likely that someone messes with the C version, the C++ version
now uses the same order than that one.
* This fixes a bug when TCP's BufferQueue tried to iterate over a list, messing
up its integrity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22676 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
status checker now only tries to lock the manager, it won't wait anymore.
* Added MediaChanged() and UpdateMediaStatusIfNeeded() methods to KDiskDevice.
* KDiskDeviceManager::_CheckMediaStatus() now uses these new methods; it should
no longer detect removed media more than once :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22621 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added private _ChildAt() and _CountChildren(), which don't ask the
delegate, thus reflecting the hierarchy as it was before changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22610 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the kernel anymore. The respective functionality will be moved into
the userland. Depending on how we want the API user to interface with
it, we may want to reintroduce a similar class later.
* Cleared remaining references to shadow partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22606 a95241bf-73f2-0310-859d-f6bbb57e9c96
{Prepare,Commit,Cancel}Modifications() using the userland add-on
backend. IsModified() and CommitModifications() are little more than
stubs ATM.
* Made BPartition::VisitEachChild()/VisitEachDescendant() const.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22602 a95241bf-73f2-0310-859d-f6bbb57e9c96
BDiskSystem to BPartition and reimplemented them using the userland
add-on backend instead of syscalls. As a side effect this solves the
TODO I recently added in GetNextSupportedType().
* Reimplemented BDiskSystem::GetTypeForContentType() using the userland
add-on backend instead of a syscall.
* Moved GetTypeForContentType() and IsSubSystemFor() from
BPartitionHandle to BDiskSystemAddOn. They were misplaced.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22592 a95241bf-73f2-0310-859d-f6bbb57e9c96
will happen on earlier i9xx chips for now...). Not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22589 a95241bf-73f2-0310-859d-f6bbb57e9c96
accelerant (or the app_server via EDID info). It's still experimental
API, and opinions are welcome.
* Moved BPrivateScreen into the BPrivate namespace.
* Rewrote Screen.h.
* Introduced a BScreen::GetMonitorInfo() method, and implemented it in the
app server as well (ie. AS_GET_MONITOR_INFO).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22563 a95241bf-73f2-0310-859d-f6bbb57e9c96
and van Flandern (1968), instead of those inefficient loops we had before.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22557 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now supports the new B_GET_EDID_INFO hook under Haiku.
* Fixed build under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22551 a95241bf-73f2-0310-859d-f6bbb57e9c96
collection of no-op methods, which could as well be implemented in
BPartition itself. This makes the Delegate hierarchy unnecessary:
MutableDelegate becomes Delegate, and we save a few casts as a side
effect.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22547 a95241bf-73f2-0310-859d-f6bbb57e9c96
builds the object hierarchy, the second will (in case of MutableDelegate)
let the disk systems do their initialization. This way the disk systems
already find a fully functional object hierarchy they can work with.
* Child creation also takes a partition name as a parameter, now.
* Implemented BMutablePartition child creation/deletion.
* The BDiskSystemAddOn/BPartitionHandle::Validate*() methods return a
status_t instead of a bool, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22540 a95241bf-73f2-0310-859d-f6bbb57e9c96
system add-ons. First work to make this class usable for them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22539 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed private AutoDeleter class. The shared ArrayDeleter is used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22538 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create their mode list. Once it's done, it should cover all possible cases,
and allow the base mode list to reside in the app_server (under Haiku, at least),
so that all drivers will benefit from an updated list.
Right now, it might already work to a degree, but it's not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22517 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be used (and is, by _init_interface_kit()) to initialize the ...
er... default instance of
PaletteConverter using the system color map, thus avoid building the
list of colors, which takes some time. Fixes bug #505.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22508 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_reserve_pages() and vm_page_allocate_page() will now steal pages from
the inactive queue as needed.
* We currently never steal active pages anymore, but this might need to be
revised later (therefore, the page scanner never waits anymore, but uses
mutex_trylock() to lock a cache).
* The page scanner and writer now both run at normal priority - let's see how
that will work out.
* Introduced an inactive queue.
* Instead of shuffling pages around in the queue (and therefore destroying LRU)
the page stealing mechanism now uses a marker page to be able to release the
page lock without losing its position in the queue.
* The page writer now always grabs the whole release count of the semaphore, so
that there won't be a huge backlog to catch up with.
* vm_page_num_free_pages() now also includes the inactive queue as well as the
reserved pages (they are no longer regarded as free pages).
* Added a insert_page_after() function that inserts a page after another one,
needed by the marker code.
* clear_page() now gets a vm_page instead of a physical address which simplified
some code.
* Removed superfluous initialization of the queues (if those aren't zeroed on
start, we would have serious problems, anyway).
* Removed old and unimplemented dump_free_page_table() ("free_pages") KDL
command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22506 a95241bf-73f2-0310-859d-f6bbb57e9c96
it intended to. That resulted in more writable pages where you wouldn't want
them (ie. allowing the area to change pages in lower caches).
* We were losing modified pages: vm_unmap_pages() sometimes has to preserve
the modified flag (eg. when called from page fault).
* Both of these were responsible that stealing active pages would crash
applications - even if less likely, this could also have happened when
stealing inactive pages. Therefore, I've activated stealing active pages
again.
* The page writer now pushes the pages of busy vnodes to the end of the queue,
so that it won't pick them up again too soon (the vnode destruction would
be in the process of writing those pages back, anyway).
* The page thief now triggers the page writer to run once it has to steal
active pages. This might be a bit too aggressive, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22495 a95241bf-73f2-0310-859d-f6bbb57e9c96
busy vnodes.
* dir_create_entry_ref() used get_vnode() incorrectly (and could therefore
potentially prevent a file system from doing proper locking when called
from the kernel).
* The vnode_store now uses this for its acquire_unreferenced_ref()
implementation (and therefore for the page writer).
* read_into_cache() and write_to_cache() were still marked inline.
* The system will now wait 10 secs for a busy vnode before returning an error.
* It will also no longer panic in that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22485 a95241bf-73f2-0310-859d-f6bbb57e9c96
functionality of the kernel add-ons will be moved into userland, which
will simplify the kernel-side significantly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22481 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
BPartition structure with the data retrieved from the kernel. For new
partitions the field is not set in the next step and later code would
use an initialized pointer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22471 a95241bf-73f2-0310-859d-f6bbb57e9c96
* his has to be used by the page writer to make sure the vnode is still valid.
* This should have been the final nail on the Luposian bug - I haven't tested
it yet, but we'll certainly see :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22462 a95241bf-73f2-0310-859d-f6bbb57e9c96
interfere with the page thief, we always need to have reserved a page for
this upfront. I introduced a function to the vm_translation_map layer that
estimates how much pages a mapping might need at maximum. All functions that
map a page now call this and reserve the needed pages upfront.
It might not be a nice solution, but it works.
* The page thief could run into a panic when trying to call vm_cache_release_ref()
on a non-existing (NULL) cache.
* Also, it will now ignore wired active pages.
* There is still a race condition between the page writer and the vnode
destruction - writing a page back needs a valid vnode, but that might just
have been deleted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22455 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
does no longer give partitioning systems precedence over file systems.
The one with the greater identification priority wins. ATM, if a file
system wins, we still mount the first file system that recognized the
partition at all, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22446 a95241bf-73f2-0310-859d-f6bbb57e9c96
the unmapped page.
* This is needed by everyone who calls this to make sure modifications to a
page aren't ignored. Namely, the page scanner and the page thief were
affected.
* Cleaned up locking the page's cache a bit in page_thief(); there is now
a helper class that takes care of everything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
dprintf() with the exception that it doesn't write anything to the
syslog. The reason is that syslog_write() releases a semaphore and can
therefore not be invoked when the thread spinlock is held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22428 a95241bf-73f2-0310-859d-f6bbb57e9c96
vfs_select.h, respectively moved most of it into the new kernel
private header wait_for_objects.h.
* Added new experimental API functions wait_for_objects[_etc](). They
work pretty much like poll(), but also for semaphores, ports, and
threads.
* Removed the "ref" parameter from notify_select_events() and the
select_sync_pool functions as well as from fd_ops::fd_[de]select(). It
is no longer needed. The FS interface select() hook still has it,
though -- the VFS will always pass 0.
* de]select_fd() take a select_info* instead of a select_sync* + ref
pair, now. Added respective functions for semaphores, ports, and
threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22416 a95241bf-73f2-0310-859d-f6bbb57e9c96
and thread spinlock was reverse in Wait() and Notify(). The thread lock
is now the outer lock -- this way it is still possible to call Notify()
with the thread lock being held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22401 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked the select support:
- The io_context additionally stores a table of lists of select_infos,
which enables it to deselect events of a pending select() when
closing a FD. This prevents a race condition potentially causing a
write to stale memory.
- The opaque selectsync* passed to FSs is now actually a select_info*.
This was necessary, since the FDs deselect() hook (unlike the
select() hook) doesn't take a "ref" argument and deselecting a
single info (e.g. caused by a premature close()) was not possible.
The select() hook's "ref" argument has become superfluous.
- It should now be relatively easy to implement a poll_on_steroids()
that can also wait for objects other than FDs (e.g. semaphores,
ports, threads etc.).
* Set/reset the signal mask in common_select(). This makes pselect()
work as required.
* Reorganized vfs_resize_fd_table().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22391 a95241bf-73f2-0310-859d-f6bbb57e9c96
components - now, we divide the initialization of that service into two parts
which allows this (before, most handlers were gone after boot).
* Added debugger command that dumps the low memory handlers.
* The slab allocator now registers its low memory handler with a higher
priority, so that it'll run before the potentially heavier ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We now have a page writer that takes some pages from the modified queue
and writes it back every few seconds. It can be triggered by the page
scanner to do that more often, though. That mechanism can be greatly
improved once we have our I/O scheduler working.
* Removed vm_page_write_modified_page() again - it was all "eaten up" by
the page writer.
* Reworked vm_page_write_modified_pages() a bit: it now uses
vm_test_map_modification() and vm_clear_map_flags() instead of the
iterating over all areas which wouldn't even work correctly.
The code is much simpler now, too.
* You usually put something to the tail of a queue, and remove the contents
from the head, not vice versa - changed queue implementation to reflect this.
* Additionally, there is now a enqueue_page_to_head() if you actually want the
opposite.
* vm_page_requeue() allows you to move a page in a queue to the head or tail.
* Replaced vm_clear_map_activation() with vm_clear_map_flags() which allows
you to clear other flags than PAGE_ACCESSED.
* The page scanner dumps now some arguments with each run.
* Removed the old disabled pageout_daemon() from NewOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22348 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments into vm.h.
* This should fix the broken build from earlier - thanks Stefano for the note!
* That also allowed to clean some other includes a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22331 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the private VM types are including vm_types.h now.
* Removed vm_page, vm_area, vm_cache, and vm_address_space typedefs; it's
cleaner this way, and the actual types are only used in C++ files now,
anyway.
* And that caused changes in many files...
* Made commpage.h self-containing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22329 a95241bf-73f2-0310-859d-f6bbb57e9c96
opaque types for C.
* As a result, I've renamed some more source files to .cpp, and fixed
all warnings caused by that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22326 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced a new vm_page_write_modified_page().
* Resolved a TODO: vm_page_write_modified_pages() did not mark a to be
written page busy but unlocked its cache which could let someone else
steal that page in the mean time.
* Moved the logic when to move a page to the active or inactive queue to
a new function move_page_to_active_or_inactive_queue().
* Moved page_state_to_string() to vm_page(); it's now also used by the
"page" and "page_queue" KDL commands.
* Made the output of the "page_queue list" command more useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22323 a95241bf-73f2-0310-859d-f6bbb57e9c96
are locked, there is now a vm_page_reserve_pages() call to ensure upfront that
there is a page for me when I need it, and may have locked some caches.
* The vm_soft_fault() routine now makes use of that feature.
* vm_page_allocate_page() now resets the vm_page::usage_count, so that the file
cache does not need to do this in read_chunk_into_cache() and
write_chunk_to_cache().
* In cache_io() however, it need to update the usage_count - and it does that
now. Since non-mapped caches don't have mappings, the page scanner will punish
the cache pages stronger than other pages which is accidently just what we
want.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22319 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the vm_cache/vm_store ref_count duality that besides being a bit ugly
also created the page dameon cache retrieval problem: now, only areas (and
cache consumers) retrieve a reference to the store (and therefore, the vnode).
The page daemon doesn't need to care about this at all anymore, and the pseudo
references of the vm_cache could be removed again.
* Rearranged deletion of vnodes such that its ID can be reused directly after
fs_remove_vnode() has been called.
* vm_page_allocate_page() no longer panics when it runs out of pages, but just
waits for new pages to become available using the new sFreeCondition condition
variable - to make sure this happens in an acceptable time frame, it'll
trigger a run of the low memory handlers.
* Implemented a page_thief() that steals inactive pages from caches and puts
them into the free queue. It runs as a low memory handler.
* The file cache now sets the usage count on the pages it inserts into the
cache (needs some rework though, cache_io() doesn't do it yet).
* Instead of panicking, the kernel will currently dead lock in low memory
situations, since BFS does a bit too much in bfs_release_vnode().
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22315 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced release_sem() with release_sem_etc() for future addition of the
B_DO_NOT_RESCHEDULE flag.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22308 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed vm_page_allocate_page_run(): it did not take the pageState into account,
and would therefore return uninitialized memory (ie. B_CONTIGUOUS areas would
contain garbage).
Now, it stores if a page is cleared in a new vm_page::is_cleared field.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22306 a95241bf-73f2-0310-859d-f6bbb57e9c96
not take the VCO limits into account; both could (and would during testing) create invalid
frequencies.
* Also reverted the order in which the PLL divisors are traversed to match the order of what
is used in the X driver to create comparable output (our error computation is based on float,
though, and should therefore create more accurate values).
* The i965 introduced a special register for the surface; the former display base register
is now only used for the view offset. Instead of setting the base manually here and there,
there is now a set_frame_buffer_base() function.
* The DPMS code will now also turn off/on the PLL clock generator.
* The code needs some more cleanup, and while the driver now produces the correct timing on
my i965 system, I'm now greeted by a black screen after startup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22289 a95241bf-73f2-0310-859d-f6bbb57e9c96
nothing is done with the data yet (besides dumping them to the serial output).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22272 a95241bf-73f2-0310-859d-f6bbb57e9c96
* i2c_bus now contains a i2c_timing structure, so that you don't need
both to talk to the I2C bus.
* Therefore, there is now a void ddc2_init_timing() function to get the
the timing DDC needs.
* Cleanup in radeon's monitor_detection.c, and updated it to work with
the DDC/I2C changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22265 a95241bf-73f2-0310-859d-f6bbb57e9c96
diagnostic purposes).
* hash_init() adjusts the table size to a prime number, which should
result in a better element distribution, particularly since usually a
power of two is passed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22210 a95241bf-73f2-0310-859d-f6bbb57e9c96
a reference to a by them not yet referenced cache was not correct.
They only incremented the reference count, but a vnode cache reference
includes also a vnode reference. In case of the page daemon this would
cause vnode references to be lost (causing bug #1465).
* The page daemon used an unsafe method to access a yet unreferenced
page cache. There was nothing that prevented the cache from being
deleted while the page daemon tried to get a reference. The
vm_page::cache field is now protected by the page cache table
spinlock, too, which the new function
vm_cache_acquire_page_cache_ref(), used by the page daemon, also
acquires while trying to get the reference.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22208 a95241bf-73f2-0310-859d-f6bbb57e9c96
group ID with the session and let the terminal update them.
* Added an "orphaned" flag to the process_group structure and code to
maintain it.
* Handle the death of a controlling process correctly: The
foreground process group gets a SIGHUP and all newly-orphaned process
groups containing at least one stopped processes are sent
SIGHUP+SIGCONT.
* The tty handles the O_NOCTTY flag correctly, now.
* The tty handles reads/writes from processes from other sessions
correctly, now.
* Handle tcsetpgrp() from background processes correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22187 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Defined flag SIGNAL_FLAG_TEAMS_LOCKED for send_signal_etc(), so it can
be called with the team lock being held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22186 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocked and no other child status is available.
* Respect SA_NOCLDWAIT and ignored SIGCHLD in waitpid(): Unless a child
status is available immediately, the thread shall block until all
children are gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22161 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vm_translation_map is now correctly held in all of the vm_ mapping
functions.
* Removed the old vm_daemons.c file - there is now a new vm_daemons.cpp
which contains the beginnings of our new page daemon.
So far, it's pretty static and not much tested. What it currently does
is to rescan all pages in the system with a two-handed clock algorithm
and push pages into the modified and inactive lists.
* These inactive pages aren't really stolen yet, even though their mappings
are removed (ie. their next access will cause a page fault). This should
slow down Haiku a bit more, great, huh? :-)
* The page daemon currently only runs on low memory situations, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22156 a95241bf-73f2-0310-859d-f6bbb57e9c96
DEBUG_CACHE_LIST) that prints an unspectacular list of pointers to all
existing caches. Feel free to extend.
* Enhanced MultiAddressSpaceLocker:
- It supports choosing between read and write lock per address space,
now.
- Added AddAreaCacheAndLock(), which adds the address spaces of all
areas that are attached to a given area's cache, locks them, and
locks the cache. It makes sure that the area list didn't change in
the meantime and optionally also that all areas have their
no_cache_change flags cleared.
* Changed vm_copy_on_write_area() to take a cache instead of an area,
requiring it to be locked and all address spaces of affected areas to
be read-locked, plus all areas' no_cache_change flags to be cleared.
Callers simply use MultiAddressSpaceLocker:: AddAreaCacheAndLock() to
do that. This resolves an open TODO, that the areas' base, size, and
protection fields were accessed without their address spaces being
locked.
* vm_copy_area() does now always insert a cache for the target area. Not
doing that would cause source and target area being attached to
the same cache in case the target protection was read-only. This
would make them behave like cloned areas, which would lead to trouble
when one of the areas would be changed to writable later.
* Fixed the !writable -> writable case in vm_set_area_protection(). It
would simply change the protection of all mapped pages for this area,
including ones from lower caches, thus causing later writes to the
area to be seen by areas that shouldn't see them. This fixes a problem
with software breakpoints in gdb. They could cause other programs to
be dropped into the debugger.
* resize_area() uses MultiAddressSpaceLocker::AddAreaCacheAndLock() now,
too, and could be compacted quite a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22152 a95241bf-73f2-0310-859d-f6bbb57e9c96
Condition variables would never be interrupted.
* ConditionVariableEntry::Add() did not correctly insert the entry into
the per-thread list of entries (the next link of the previous entry
was not adjusted), which could leave the entry unnotified when the
previous entry was notified, thus leaving it in the respective
condition variable's list after the end of its life time. This should
fix a crashing bug I rarely encountered.
* Added debug checks in the PrivateConditionVariableEntry
constructor/destructor that should have helped me to find
forementioned bug hours earlier, had I been bright enough to realize
that I didn't include <debug.h> and those KDEBUG guarded checks were
never executed. :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22151 a95241bf-73f2-0310-859d-f6bbb57e9c96
Can be enabled by defining KERNEL_BREAKPOINTS in arch/user_debugger.h
and will provide the arch_{set,clear}_kernel_{break,watch}point()
function. Hitting a break-/watchpoint will throw the thread into KDL.
* Finally added a comment, what's the point of
i386_reinit_user_debug_after_context_switch(), since I wonder every
time I see it. Should be optimized aways soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22150 a95241bf-73f2-0310-859d-f6bbb57e9c96
(needs to account for the parts that the BMenuField draws, ie the shadow
on the right)
* fixed follow mode of BMenuBar in fixed size mode (B_FOLLOW_LEFT_RIGHT)
* don't resize the BMenuField in fixed size mode (endless loop), this should
be more robust anyways, since this endless loop would be triggered if an
application tried to manually resize menuField->MenuBar() in auto resizing
mode
* fixed calculation of the parts that need to be redrawn on resize
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22127 a95241bf-73f2-0310-859d-f6bbb57e9c96
is used instead of death_entry for team::dead_children.
* Added team::{stopped,continued}_children, which, analoguously to
dead_children, are used to track the state of stopped/continued
children.
* A team does have a job_control_entry, which is allocated at team
creation time. It will be inserted into the parent's
{stopped,continued}_children lists as the team's main thread is
stopped/continued and removed when waitpid() retrieves the child
state. When the team dies the entry is detached from the team and goes
into the parent's dead_children list.
* Removed the wait_for_any field from team_dead_children. It was solely
used to avoid deletion of the contained entries in certain situations.
wait_for_child() (the waitpid() backend) always deletes an entry now,
regardless of whether other threads are waiting; that's in
accordance with the waidpid() specification. wait_for_thread() removes
the entry only, if the caller is the parent of the respective team.
* Introduced team_set_job_control_state() which performes the job
control entry transitions between the respective lists and wakes up
threads waiting in wait_for_child(). It is invoked on team death and
when the team's main thread receives job control signals.
* Reorganized wait_for_child(). It handles WCONTINUED and WUNTRACED now,
too. Removed a block that interpreted the supplied ID as thread ID.
* Added missing parts in waitpid().
Job control starts to work, though it seems to have some glitches.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22088 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added class InterruptsSpinLocker, which disables interrupts and
acquires a spinlock all in one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22086 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable. Due to C code including the header I had to turn it from and
aggregated member to a pointer. I'm very close to starting to convert
all remaining .c to .cpp files. :-/
* Got rid of the "waiters" field. It was only written, never read.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22084 a95241bf-73f2-0310-859d-f6bbb57e9c96
exists and thread was notified), B_ENTRY_NOT_FOUND (condition variable
not found or Unpublish()ed while waiting), or B_INTERRUPTED
(interrupted by a signal).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22083 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed left-over commented C implementation.
* It is now possible for a thread to wait for more than one condition
variable at a time.
* Made waiting for condition variables optionally interruptable.
* Renamed Notify() method to NotifyAll() and added a NotifyOne(), so
that it is now possible to wake up only one of the waiting threads.
Pretty much untested at the moment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22081 a95241bf-73f2-0310-859d-f6bbb57e9c96
content name are supported.
* Added file_system_module_info::flags (analogously to
partition_module_info::flags) which indicate which disk device
features the FS supports.
* Replaced the
file_system_module_info/partition_module_info::supports_*()
hooks by a get_supported_operations() hook and for partitioning
systems additionally a get_supported_child_operations() hook.
* Updated file and partitioning systems accordingly.
* Updated fs_shell accordingly.
* Updated the DDM accordingly. The syscall interface remains unchanged,
though.
* _user_supports_initializing_partition() also checks whether the parent
partitioning system is content now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22043 a95241bf-73f2-0310-859d-f6bbb57e9c96
* handle out of memory situations
* don't try to copy (and assign op!) in SetData if opCount/ptCount is 0
-> FontDemo doesn't crash anymore eventually when cycling fonts in outline
mode
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22000 a95241bf-73f2-0310-859d-f6bbb57e9c96
* On exec() the new function thread_reset_for_exec() is called which clears the signals
and cancels an eventually set alarm. Both things weren't done before...
* Some minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21989 a95241bf-73f2-0310-859d-f6bbb57e9c96
as Marcus pointed out, having it outside wasn't thread safe. Moved
PicturePlayer into the BPrivate namespace.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21982 a95241bf-73f2-0310-859d-f6bbb57e9c96
this should fix bug #1293.
I've tested it here on two machines, one works better now, the other stayed the
same (Radeon 9250, and a laptop FireGL (id 4c66) version). This apparently also
fixed bug #1394.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21930 a95241bf-73f2-0310-859d-f6bbb57e9c96
AppendToPicture() (but still doesn't work :( ). Moved some functions
around in PictureDataWriter.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21925 a95241bf-73f2-0310-859d-f6bbb57e9c96
stroke/fill polygon, stroke/fill bezier. some work towards drawing of
nested pictures.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21918 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Also swap the flattened size when creating the read buffer
* Define specialized byte_swap()s for unsigned types too so that type_code and the like get swapped correctly
This should fix bug #1371.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21901 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pulled the actual tree code into a non-templatized class AVLTree to
reduce the amount of code generated each time the template is
instantiated.
* Changed the iterator interface to Java-style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21892 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed a few instances where the page state was set busy directly after
allocating it. This is a no-op, since a page is always busy after
allocation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21875 a95241bf-73f2-0310-859d-f6bbb57e9c96
cheap means to block threads until notified explicitely.
threads
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21874 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts) and SpinLocker (acquires/releases spinlocks).
* Adjusted Jamfiles of components that used <util/AutoLock.h> but didn't
add all header directories required now (<int.h> was added).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21873 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the ref_count from vm_areas. You now always need to have the address
space locked (read or write, depending on what you do) when dealing with
areas.
* Added helper classes for locking the address space: AddressSpace{Read|Write}Locker,
and MultiAddressSpaceLocker which can lock several spaces at once and makes
sure no dead locks can happen.
* resize_area() is now using the MultiAddressSpaceLocker instead of no locking
at all; ie. it should now be safely to use.
* Disabled transfer_area() for now; it will be changed to work like an atomic
clone_area()/delete_area(), that is, it will hand out a new ID for the
transfered area.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21848 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional parameters that are fed into a dprintf() before panic() is
invoked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21838 a95241bf-73f2-0310-859d-f6bbb57e9c96
and DrawString() without
* this change also includes adding the penlocation to the shape to-screem
coordinate conversion (temporarily breaks shape rendering, will be fixed
in next commit)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21821 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the previous AGG implementation is superfluous
* the new implementation is based on that one, but in a way that allows
read/write locking to the list of cache entries (fonts) as well as
read/write locking to the cached glyphs per individual font cache entry
* new GlyphLayoutEngine.h, which is to be the central place for layouting
glyphs along the baseline.
It handles the locking for getting the font cache entries.
It works by giving it a template class GlyphConsumer which does the
actual work.
* changed AGGTextRenderer to use the new font cache
* changed ServerFont::StringWidth(), and the bounding box stuff to use it
* changed DrawingEngine, it doesn't need the global font lock anymore
* our BFont thought that GetBoundingBoxesAsGlyphs and GetBoundingBoxesAsString
is the same, which of course it isn't, hence the two separate functions...
AsGlyphs just gets the bounding box of each glyph in a string, not treating
the string as an actual word
AsString adds the offset of the glyph in the word to the bounding box
* changed ServerProtocol.h accordingly for the different bounding box meaning
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21797 a95241bf-73f2-0310-859d-f6bbb57e9c96
that OpenHashTable.h does not collide with all the other places that this
is used, it seems everything still builds fine. Most problematic could be
the OpenHashTable.h at kernel/util, but it seems it the target using
that are not affected.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21792 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted the FS initialize() hook to have FD and partition_id
parameters like the other hooks instead of the partition path.
* Adjusted initialization in BFS accordingly.
* Implemented the FS initialization method in KFileSystem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21788 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the notification framework: removed the updater stuff completely;
it was only there to account for some peculiarities of the node monitor which
we now solved differently.
* NotificationListener no longer includes a doubly linked list link for convenience;
it might want to listen to more than just one service.
* NotificationService cannot have an abstract destructor.
* Changed the _user_stop_watching() syscall to mirror the Be API; ie. it's no
longer possible to just remove some flags separately, just to stop listening
completely.
* Adapted the node monitor implementation to live in the NodeMonitorService class
that uses the new notification framework.
* Removed the public kernel node monitor API - it wasn't useful that way since you
couldn't do a lot with the KMessage in the kernel without using a private API.
Now you will have to use the (private) notification manager to use the node monitor
from inside the kernel. At a later point, we might introduce a public API for that,
too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21780 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a Current() method to the same class that returns the current element again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21779 a95241bf-73f2-0310-859d-f6bbb57e9c96
Will be used for node monitoring and other stuff, too (like the Registrar or the
VM low memory handler).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21768 a95241bf-73f2-0310-859d-f6bbb57e9c96
private/shared.
* Made AddReference() and CountReferences() inlines.
* The registrar is now using the private Referenceable version in libbe.so.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21767 a95241bf-73f2-0310-859d-f6bbb57e9c96
therefore, we could remove the ugly defines from KMessage again, and compile it
with KMESSAGE_CONTAINER_ONLY.
* Added KMessage::SetDeliveryInfo() to be able to send messages with a correct
header.
* Fixed a bug in KMessage::SendTo() that would not send the senderTeam when passing
a negative value for the parameter, but override it when passing in a valid
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21740 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved method documentation from headers to source files.
* Fixed small problems (memory leaks, unsafe string duplication,...).
* Added TODOs where I spotted problems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21721 a95241bf-73f2-0310-859d-f6bbb57e9c96
for _kern_load_image().
* Added KMessage to the runtime_loader (a bit hacky, though) - it will use
it to deliver the above mentioned functionality.
* load_dependencies() did return the wrong status code in case a library
was missing; now it returns B_MISSING_LIBRARY.
* load_dependencies() will now try to load all dependencies when a report
message is requested; therefore, all missing libraries are listed.
* Renamed uspace_program_args to user_space_program_args.
* The kernel filled in various members of the user_space_program_args structure
unsafely, ie. was not using user_memcpy().
* Renamed some local variables in team.c to better fit our style guide (ie.
uargs to userArgs).
* Changed Tracker to use the new _kern_load_image() variant on Haiku to retrieve
and report all missing libraries. This fixes bug #1324.
* Adapted kernel_cpp.cpp to the runtime loader as well; the latter will now
compile with _LOADER_MODE defined.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21715 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the active ViewLayer is now always mirrored in the Painter instance
of a ServerWindow, so that it doesn't need to be synced on every drawing
command, this was previously incomplete for font handling
* removed the DrawState parameter from all the DrawingEngine functions
* adjusted ServerWindow and ServerPicture accordingly
* made sure that string related functions used by non-drawing related
parts (ServerApp, Decorator) don't interfere with the current drawing
state
* moved AS_SYNC handling from _DispatchViewMessage to _DispatchMessage,
it is actually a window message and doesn't require fCurrentLayer to
be valid
* fixed bug #1300, fCurrentLayer was not updated when a ViewLayer was
deleted by client request which happened to be fCurrentLayer (I am now
handling it so that the parent becomes the current layer, could be
wrong)
* AGGTextRenderer is no longer using it's own scanline, which should save
a few bytes RAM, the Painter already had such an object
* StringWidth() in AGGTextRenderer is now taking the escapement_delta into
account
* Painter::StrokeLine() doesn't need to check the clipping as much, since
that is already done in DrawingEngine
* if a ServerWindow message is not handled because fCurrentLayer is NULL,
a reply is sent in case the messages needs it (client window could
freeze otherwise, waiting for the reply for ever)
* removed unused AS_SET_FONT and AS_SET_FONT_SIZE
* added automatic RGBColor -> rgb_color conversion to RGBColor.h
* minor cleanup for 80 char/line limit
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21685 a95241bf-73f2-0310-859d-f6bbb57e9c96
* More conditional debug code (wrt page transitions between caches).
* Replaced debugger command cache_chain by a nicer cache_tree.
* While handling a soft fault: When we temporarily unlock a cache, it
can theoretically become busy. One such occurrence is now handled
properly, two more panic() ATM, though should be fixed.
* When merging caches, we do now always replace a dummy page in the
upper cache, not only when the concurrent page fault is a read fault.
This prevents a page from the lower (to be discarded) cache from still
remaining mapped (causing a panic).
* When merging caches and replacing a dummy page, we were trying to
remove the dummy page from the wrong cache (causing a panic).
The Haiku kernel seems now to run shockingly stable. ATM, we have more
than two hours uptime of a system booted and running over network. We
didn't manage to get it down by fully building Pe, downloading, unzipping,
and playing with various stuff. Someone should finally fix all those app
server drawing bugs, though (hint, hint! ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21672 a95241bf-73f2-0310-859d-f6bbb57e9c96
stack hungry and would previously hit the stack limit and thus cause a
double fault. Hopefully we'll be able to reduce the stack foot print at
some time.
PXE boot does now fully work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21663 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Images preloaded by the boot loader had to be modules to be of any use
to the kernel. Extended the mechanism so that any images not accepted
by the module code would later be tried to be added as drivers by the
devfs. This is a little hacky ATM, since the devfs manages the drivers
using a hash map keyed by the drivers inode ID, which those drivers
obviously don't have.
* The devfs emulates read_pages() using read(), if the device driver
doesn't implement the former (all old-style drivers), thus making it
possible to BFS, which uses the file cache which in turn requires
read_pages(), on the device. write_pages() emulation is still missing.
* Replaced the kernel_args::boot_disk structure by a KMessage, which can
more flexibly be extended and deals more gracefully with
arbitrarily-size data. The disk_identifier structure still exists,
though. It is added as message field in cases where needed (non net
boot). Moved the boot_drive_number field of the bios_ia32 platform
specific args into the message.
* Made the stage 1 PXE boot loader superfluous. Moved the relevant
initialization code into the stage 2 loader, which can now be loaded
directly via PXE.
* The PXE boot loader does now download a boot tgz archive via TFTP. It
does no longer use the RemoteDisk protocol (it could actually be
removed from the boot loader). It also parses the DHCP options in the
DHCPACK packet provided by PXE and extracts the root path to be
mounted by the kernel.
* Reorganized the boot volume search in the kernel (vfs_boot.cpp) and
added support for network boot. In this case the net stack is
initialized and the network interface the boot loader used is brought
up and configured. Since NBD and RemoteDisk are our only options for
net boot (and those aren't really configurable dynamically) ATM, the
the boot device is found automatically by the disk device manager.
Booting via PXE does work to some degree now. The most grievous problem
is that loading certain drivers or kernel modules (or related activity)
causes a reboot (likely a triple fault, though one wonders where our
double fault handler is on vacation). Namely the keyboard and mouse input
server add-ons need to be deactivated as well as the media server.
A smaller problem is the net server, which apparently tries to
(re-)configure the network interface we're using to boot, which
obviously doesn't work out that well. So, if all this stuff is disabled
Haiku does fully boot, when using the RemoteDisk protocol (not being
able to use keyboard or mouse doesn't make this a particular fascinating
experience, though ;-)). I had no luck with NBD -- it seemed to have
protocol problems with the servers I tried.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21611 a95241bf-73f2-0310-859d-f6bbb57e9c96
François Revol