arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added smp_send_multicast_ici(), which sends the message to all CPUs
specified via a mask.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27910 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer format, the buffer can now also contain other events than just
stack traces. ATM these are only references to the image events
(created/deleted). Therefore we no longer have to flush the profiling
buffer after such an event, since the debugger can exactly match the
samples. Since we couldn't flush when the profiling timer hit while the
thread was in the kernel, that wasn't working that well anyway.
"profile -f" fails to translate stack trace addresses only very rarely,
now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27775 a95241bf-73f2-0310-859d-f6bbb57e9c96
letting the boot loader provide full paths for the pre-loaded images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27753 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted, before anyone could try to load any modules from it.
Also pass it a flag whether the boot volume is where the boot loader
pre-loaded the modules from.
* module_init_post_boot_device() changes the pre-loaded module image
paths to normalized boot volume paths, now. Got rid of the code in
register_preloaded_module_image() which tried something like this.
* Changed module image ref counting. A referenced module has single
reference to its image, which is released when the module becomes
unreferenced.
* get_module() for a reference module will not try to re-get and re-set
the module's image anymore. That could lead to a similar module (from
different paths) being loaded at the same time. A module from a new
file can only be loaded when the old one has been put completely.
* Simplified B_KEEP_ALIVE module handling a bit. When the module is
initialized, we add another reference, which we'll never free. Thus
the module remains loaded without special handling. Removed
module_image::keep_loaded. A B_KEEP_ALIVE module remains referenced
and thus its image remains referenced, too.
* Removed module::file, a cached path to the module's image. An
optimization that wouldn't work with multiple root directories for
modules (/boot/beos/..., /boot/common/...) or when module files were
moved. get_module() does now always search the image file, when the
module is still unreferenced. This should be a bit slower than before,
but I didn't notice any difference in VMware at least. If it turns out
to be a problem we could introduce a more intelligent cache that stays
up to date by using node monitoring.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27752 a95241bf-73f2-0310-859d-f6bbb57e9c96
function (normalize_path()), now. There was some code duplication
before.
* Added "bool traverseLink" parameter to vfs_normalize_path(). When
true and the leaf component is a symlink, it will be resolved.
* KPath:
- Added similar leaf link traversal parameter to SetTo() and
SetPath().
- Added Normalize().
- Added DetachBuffer(), which returns the object's current buffer and
unsets itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27751 a95241bf-73f2-0310-859d-f6bbb57e9c96
elf_add_memory_image_symbol(). The former creates and registers a new
image that has not been loaded from a file. The latter adds a symbol to
its symbol table. This is mainly a debug feature, allowing to name code
or data in memory regions that aren't associated with loaded ELF
objects.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27721 a95241bf-73f2-0310-859d-f6bbb57e9c96
been called for a team, and fail installing the default debugger if it
is set. This makes disable_debugger() actually work. Fixes bug #2763.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27713 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the profiling API by an option to record a variable number of
samples per tick. The stack depth is used as a maximum.
* Added new option "-f" to the "profile" tool. When specified it
increments the hit counts of all symbols in the full available caller
stack. I.e. the resulting hit counts will approximate the total time
spent in each function or any function directly or indirectly called
by it. Thus "_start" and "main" will usually get 100% and leaf
functions only what time has actually been spent in them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Relaxed the stack depth and profiling interval limits a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reduced the kernel_args array size from 32 to 16 (7 are used on a normal
build).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27690 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed hash_remove_current(): It didn't update "lastElement" and thus
always also removed all elements in the same bucket preceding the one
to be removed. Also got rid of the useless "for" loop.
Fixes#2757.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted used files systems accordingly.
* BFS::Stream::GetName() was broken. It accessed the small data region
which wasn't loaded, since BFS::Stream derived from bfs_inode, which
is a variably-sized structure with the small data region at the end.
Changed that to a ref-counted, shared member instead.
* Implemented RootFileSystem::GetName().
* Added Directory::GetPath() to get a full path of the directory or an
entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27664 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer during a timer event that interrupted a kernel function: We do
now flush the buffer as soon as it is 70% full, *if* we didn't interrupt
a kernel function. When the buffer runs full and we still haven't hit a
user function, we drop the tick. The number of dropped ticks is recorded
and sent to the debugger with the next update message.
Reverted the previous partial solution (the temporary disabling of
profiling while in debugger support code).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27658 a95241bf-73f2-0310-859d-f6bbb57e9c96
is created or deleted (or exec*() has been invoked). The counter is
sent with several debugger messages.
* Track the image event counter that is used when samples are added to
the profiling buffer. If the current team counter differs, we flush
the buffer first (sending an update message to the debugger), so that
the debugger has a chance to match the addresses to the correct images.
* Disable profiling for a thread while it runs in the debugger support
code. This fixes potential deadlocks which could occur when a
profiling timer event occurred that would require the buffer to be
flushed while the thread was just sending something to the debugger or
waiting for a command. As it turns out, this is not sufficient either,
since we should never try to flush the buffer when the timer event
occurred in the kernel, since the thread might hold a lock that the
debugger thread could try to acquire. Will implement a more general
solution later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27656 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We can't enable interrupts in an interrupt handler. Instead we use the
newly introduced callback feature, which notifies the debugger right
before returning from the interrupt.
* We didn't indicate that the profiling buffer was full and that the
thread shouldn't be profiled ATM. Therefore it could happen that it
was profiled while trying to notify the debugger that the profiling
buffer was full, resulting in a deadlock. Introduce a respective flag
in the thread debug structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27649 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler and will be executed right before returning from the
interrupt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27648 a95241bf-73f2-0310-859d-f6bbb57e9c96
be tracked to the kernel, which then counts the hits, an area is
passed to kernel in which the hits are recorded. When the area is
full, the debugger is notified. For some reason that part doesn't work
yet -- the whole system freezes when waiting for a reply.
* Reorganized the profile tool code a bit. For one with respect to the
changed API, but also to prepare tracking of image creation/deletion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27640 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
VMware this doesn't produce very good results though. In my tests I only
got twice as many hits as with 1 ms, although it should be roughly ten
times as many. Might work better on real hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27572 a95241bf-73f2-0310-859d-f6bbb57e9c96
still pretty much work in progress.
* Introduced init_thread_debug_info() which is used instead of
clear_thread_debug_info() when the thread is created. The latter
requires former initialization.
* user_debug_thread_deleted() is now already invoked in thread_exit(),
not in the undertaker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27531 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified, the message is read but not removed from the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27527 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Imported radix bitmap tree implementation from FreeBSD and adjusted it
for Haiku.
* Make use of the radix tree in the swap support implementation instead
of using simple bitmaps. This will allow for faster swap slot
allocations. ATM Haiku doesn't benefit that much, since we always
allocate single pages, but that will change eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27355 a95241bf-73f2-0310-859d-f6bbb57e9c96
unscheduled was incorrect.
* Introduced _kern_analyze_scheduling() syscall. It requires scheduler
kernel tracing to be enabled. It uses the tracing entries for a given
period of time to do a similar analysis the "scheduler" debugger
command does (i.e. number of runs, run time, latencies, preemption
times) for each thread. Additionally the analysis includes for each
thread how long the thread waited on each locking primitive in total.
* Added kernel tracing for the creation of semaphores and initialization
of condition variables, mutexes, and rw locks. The enabling macro is
SCHEDULING_ANALYSIS_TRACING. The only purpose is to provide
_kern_analyze_scheduling() with more info on the locking primitives
(the name in particular).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27304 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing buffer entries even when not in the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27302 a95241bf-73f2-0310-859d-f6bbb57e9c96
for message queue
* Removed unnecessary header Vector.h
* Removed HasSemaphoreSet method: since there will be an IPC table for each
subsystem, if a key exist, it already has a semaphore set associated
with it
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27256 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented _kern_msgget()
Work in progress, some stuff may be removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27254 a95241bf-73f2-0310-859d-f6bbb57e9c96
256 MB RAM, 1.5 GB swap, and "jam -j2", so it basically seems to do its
job alright.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27233 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement color palette generation for the boot splash images in the
generate_boot_screen build tool. Only 4-bit screen support is missing now.
* Adopted images.h with the new results from generate_boot_screen.
This should fix black boot screens for graphics cards that don't support
true color modes for the native resolution. I've tried to find the ticket,
#2177 almost looks like the one, but it looks more like the mode is out
of range if I understand the ticket right.
Thanks a lot, David, and sorry it took so very long to apply your patch!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27223 a95241bf-73f2-0310-859d-f6bbb57e9c96
referencing iframe registers. Their prefix is "$". E.g. "$eax" refers to
the eax register of the current iframe. The features cooperates with the
"in_context" command, i.e. "in_context 92 $eip = 0" will set the eip
register of thread 92 to 0 (thus sealing its fate ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27192 a95241bf-73f2-0310-859d-f6bbb57e9c96
due to alignment padding before.
* Reorganized merging of caches a bit. Renamed MergeStore() to Merge()
and moved some more functionality into it. The method also moves the
pages from source to consumer, now. This is necessary, since
VMAnonymousCache needs to consider both physical pages and swap pages
at the same time. Before we first moved the physical pages and the
swap pages later, which was broken for two reasons: (1) A swap page in
the consumer cache shadows a physical page of the source cache, which
we ignored. (2) A source cache's physical page that also had a swap
page would lose the latter in the process when moved to the consumer
cache, i.e. if the page was not marked modified, it could be stolen
and its data would be lost.
These changes improve the situation when building Haiku with 256 MB RAM
in that jam doesn't crash anymore, but in my test the system became
totally unusable after about an hour or 7000 targets (GUI froze). For
some reason it didn't manage to free pages anymore although swapping
heavily.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27179 a95241bf-73f2-0310-859d-f6bbb57e9c96
PC of the innermost iframe.
* The "in_context" command does now set the currently debugged thread
respectively.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27166 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger and added respective getter/setter methods
debug_{get,set}_debugged_thread(). By default the currently debugged
thread is the thread that dropped into the kernel debugger, but commands
like "in_context" can change it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27164 a95241bf-73f2-0310-859d-f6bbb57e9c96
state_to_text().
* state_to_text() can now deal with a NULL thread argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27163 a95241bf-73f2-0310-859d-f6bbb57e9c96
first command line argument of a given command line string.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27155 a95241bf-73f2-0310-859d-f6bbb57e9c96
as they aren't unloaded when there is no boot device yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27136 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a second kernel daemon service, resource resizer, which is
mainly supposed to be used for resizing allocations asynchrounously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27122 a95241bf-73f2-0310-859d-f6bbb57e9c96
create_area_etc().
* When the new flag CREATE_AREA_DONT_WAIT is specified, the functions
don't wait for memory or pages to become available. They fail
immediately instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27117 a95241bf-73f2-0310-859d-f6bbb57e9c96
of free objects an object cache should try to have ready. If the number
of free objects drops below the threshold, a new urgent priority thread
is asked to asynchronously resize the object cache (pretty similar to
the heap grower thread). Such a mechanism is necessary for code paths
that are supposed to free pages, but may need memory themselves (like
the swap support).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27100 a95241bf-73f2-0310-859d-f6bbb57e9c96
is enabled to set a per-heap get_caller() function.
* Added "-h <heap>" option to the "allocations_per_caller" command. If
given only the allocation for the specified heap are considered.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27097 a95241bf-73f2-0310-859d-f6bbb57e9c96
be passed on to the IORequest. Most relevantly physical pages can now
be written directly by passing B_PHYSICAL_IO_REQUEST.
* Added VMCache::WriteAsync() which is supposed to write pages
asynchronously. The base class version version falls back to the
synchronous Write(). Only VMVnodeCache implements WriteAsync() ATM,
VMAnonymousCache (swap support) still has to be adjusted accordingly.
* write_page() doesn't need to map the page anymore as it can write the
physical page directly.
* Modified the page writer to write pages asynchronously. This shouldn't
have any noticeable effect yet. It will though as soon as the I/O
scheduler reorders I/O operations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27056 a95241bf-73f2-0310-859d-f6bbb57e9c96
writes the given page iovecs asynchronously. The new class
AsyncIOCallback is used to inform the caller when the request has been
finished.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27055 a95241bf-73f2-0310-859d-f6bbb57e9c96
Ingo suggestions: instead of having one global sem_undo list,
we now have two local list, one per semaphore set and one per team
which is held in its xsi_sem_context structure, along with a mutex.
A mutex has also been added to the semaphore set class in order to
protect the local list, but also in order to (hopefully) improve
concurrency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26993 a95241bf-73f2-0310-859d-f6bbb57e9c96
heap_class object now. Removed unused heap_allocator::heap_class.
* Made heap_class, heap_create_allocator(), heap_memalign(), heap_free()
public, so that a specialized allocator can be used elsewhere in the
kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26965 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed TraceEntryIterator::Current(): If fEntry was NULL, it would
return 0x4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26955 a95241bf-73f2-0310-859d-f6bbb57e9c96
(fault address, pc, read/write) when a page fault occurs, and print them
in case this caused the termination of a debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26949 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the protection of each page (4 bits per page).
* Added no-op implementation of posix_madvise().
* Replaced a few "addr_t size" parameters by "size_t size".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26871 a95241bf-73f2-0310-859d-f6bbb57e9c96
dedicated functions.
* Introduced gMappedPagesCount variable which counts the total number of
physical pages that are mapped.
* Added vm_page_get_stats() which fills in the memory related part of
the system_info structure. Used and cached pages are computed
differently, now. The "available" (== not committed) memory is no
longer used for the computation as it doesn't say anything about the
actually used/free pages (with swap support enabled it is even
less meaningful, since we first commit swap space when possible).
We do also consider the memory used by the block cache as cached
pages, now. All in all these changes should fix the memory statistics
reported by get_system_info(), IOW bug #2574.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26837 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the guard pages. Adjusted the kernel and boot loader code
accordingly -- the guard pages size is added/not removed respectively.
The stack size passed to _kern_spawn_thread() is now the actually usable
size, and it is no longer possible to specify a size smaller than or
equal to the guard pages size.
* vm_create_anonymous_area(): Precommit two pages maximum -- a stack with
only one page usable size obviously doesn't need two pages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26819 a95241bf-73f2-0310-859d-f6bbb57e9c96
now a lot earlier.
* That makes it now possible to use modules pretty early in the kernel (like
before timer_init(), or int_init_post_vm()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26790 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
gTeamSpinlock.
* Renamed the static global variables in smp.c to match our style guide.
* Minor other cleanup.
* Removed superfluous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26730 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed deadlock in xsi_sem_undo - RecordUndo
- Fixed issue in xsi_sem_undo: if the semaphore set does not exist
anymore, ignore the request but do remove the process from the sUndoList,
which wasn't previously done.
- free() in ClearUndos was called with interrupts disabled
- when a semaphore set ends to exist, remove all it's sem_undo request as it's ID
will be reused in the future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26727 a95241bf-73f2-0310-859d-f6bbb57e9c96
partially (e.g. due to hitting the end of file). The respective
classes have grown new methods and attributes to deal with that. The
"finished" callbacks have got additional parameters to indicate
whether the transfer was only partial and how much has been
transferred. Other callbacks and functions have a size_t* in/out
parameter instead of a simple size_t, now.
* vfs_{read,write}_pages() do now use the I/O request framework instead
of the underlying FS's {read,write}_pages() hooks (those should be
unused now). Furthermore they've got an additional "flags" parameter,
which is passed to IORequest::Init(), i.e. it allows to specify that
the given vecs refer to physical addresses.
* The file cache's read_into_cache() reads directly into physical
pages, now.
* Fixed bug in DoIO::IO(): The offset was not adjusted, so that all
pages were incorrectly transferred from/to the same location.
* Fixed broken subrequest scheduling loop head in
do_iterative_fd_io_iterate().
* Adjusted the test driver and implemented its io() hook. Using this
driver I/O requests are passed all the way from the VFS/VM to the
driver and through the I/O scheduler. It even seems to work. :-)
* Added missing const to the iovec* parameter of the IORequest::Init()
methods.
* Disabled some debug output by default. Added new optional debug
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26692 a95241bf-73f2-0310-859d-f6bbb57e9c96
is defined to 1; this allows asserting the read lock case, too.
* Added ASSERT_{READ|WRITE}_LOCKED_RW_LOCK() macros. The read assertion is only
working when KDEBUG_RW_LOCK_DEBUG is defined to 1, the write assertion works
always.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "syslog" command that dumps the contents of the syslog ring buffer into
KDL. Use the '-n' option to only show what hasn't been sent to the syslog
daemon yet.
* When entering the kernel debugger, the current thread ID and name are also
printed (not only the current CPU).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26684 a95241bf-73f2-0310-859d-f6bbb57e9c96
by myself:
* renamed xsi_do_undo() to xsi_sem_undo() (there is more to XSI than sems).
* Fixed coding style issues in sys/sem.h and xsi_sem.cpp.
* Added _kern_*() syscall prototypes to syscalls.h.
* Added a TODO in xsi_sem.cpp and xsi_semaphore.h about moving union semun to
a shared header.
* Made the team::xsi_sem_undo_requests int32 - due to padding, it would have
needed 4 bytes anyway; please always use specific types over int/short/long.
* xsi_sem_undo() now checks if it needs to do anything - the calls in team.cpp
no longer needs to do this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26676 a95241bf-73f2-0310-859d-f6bbb57e9c96
vnode (falling back to synchronous I/O if the io() is not supported).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26672 a95241bf-73f2-0310-859d-f6bbb57e9c96
to provide asynchrounous (or only synchronous, if asynchronous is not
supported) I/O request support. It will eventually replace
{read,write}_pages(). None of the FS implementations implement them
yet.
* Implemented some support functions for request-based I/O. File system
implementations can use do_fd_io() which passes an I/O request to the
layer responsible for a given FD, and do_iterative_fd_io(), which
translates a request for a file to subrequests for the underlying
device and passes them on. Both fall back to synchrounous processing
when the io() hook is not supported.
Furthermore added vfs_synchronous_io() which should be handy for the
devfs to perform io_requests synchronously for devices that don't
support the io() hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26655 a95241bf-73f2-0310-859d-f6bbb57e9c96
- add 040 cpu and mmu stuff
- use leftover from the page root table to put interrupt vector table to set VBR to
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26627 a95241bf-73f2-0310-859d-f6bbb57e9c96
- rewrote early_query() to use the TT0 mapping to remove the page_hole stuff.
- fixed natfeat, using a page set up from the bootloader for now as it wants physical address. At least it's enough to see from the debugger:
load kernel...
kernel entry at 8003711a
Welcome to kernel debugger output!
Haiku revision: 26582
PANIC: unknown cpu_type 68040
Welcome to Kernel Debugging Land...
Running on CPU 0
kdebug>
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26599 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As this was the last user of the READ_COUNT/WRITE_COUNT definitions in
vm_priv.h, I removed those as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26582 a95241bf-73f2-0310-859d-f6bbb57e9c96
It does its job by using part of libsupc++, with fake malloc and friends to make sure it won't double fault.
Works here, but cp-demangle must be extracted by hand from the lib, can't get the rule to work as I want, Ingo ?
Maybe using it directly without malloc hack would be ok with 16KB buffer, but I'm not sure of that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26581 a95241bf-73f2-0310-859d-f6bbb57e9c96
fs_vnode_ops::write_pages() to be called with fsReenter = true. Since
this is no longer the case, the argument has become superfluous. For
read_pages() it always was. Removed the argument from the functions
and all functions that propagated it.
* Some whitespace at the end of lines was removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26579 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduces the following relevant changes:
* VMCache:
- Renamed vm_cache to VMCache, merged it with vm_store and made it a
C++ class with virtual methods (replacing the store operations).
Turned the different store implementations into subclasses.
- Introduced MergeStore() callback, changed semantics of Commit().
- Changed locking and referencing semantics. A reference can only be
acquired/released with the cache locked. An unreferenced cache is
deleted and a mergeable cache merged when it is unlocked. This
removes the "busy" state of a cache and simplifies the page fault
code.
* Added VMAnonymousCache, which will implement swap support (work by
Zhao Shuai). It is not integrated and used yet, though.
* Enabled the mutex/recursive lock holder asserts.
* Fixed DoublyLinkedList::Swap().
* Generalized the low memory handler to a low resource handler. And made
semaphores and reserved memory handled resources. Made
vm_try_resource_memory() optionally wait (with timeout), and used that
feature to reserve memory for areas.
...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26572 a95241bf-73f2-0310-859d-f6bbb57e9c96
bootloader's smp init and into its own unit.
ACPI tables can now generally be found with acpi_find_table(signature).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26538 a95241bf-73f2-0310-859d-f6bbb57e9c96
- bitfield definitions of page dirs were reversed... 040 is still wrong though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26528 a95241bf-73f2-0310-859d-f6bbb57e9c96
- move part of mmu handling to mmu-dependant files and extend ops
- implemented 040 mmu init. doing so I spotted a bug in ARAnyM which ignored [ID]TT0. Linux likely doesn't use them but I was too lazy touse temporary page tables. I also noticed bitfields were in wrong order, to be fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26527 a95241bf-73f2-0310-859d-f6bbb57e9c96
though until we use ACPI for proper PCI IRQ routing through the IO APIC.
Therefore the IO APIC code path is not yet enabled and the IO APIC isn't used.
ISA interrupts would work though, as would PCI interrupts if you'd hardcode
them for your specific configuration.
Note that this change also modifies some parts in the bootloader and in the PIC
setup to make local APICs available even on non-SMP systems. This causes APIC
timers to be used instead the normal PIT if it is available (also on non-SMP
configurations).
Also fixes some general errors in SMP and PIC code as well as some code cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26492 a95241bf-73f2-0310-859d-f6bbb57e9c96
This allows drivers to lock the memory outside of the original team context.
* create_area_etc() got a struct team as first argument, but that should have
been a team_id.
* Removed delete_area_etc() - there is already vm_delete_area() doing the same
thing.
* Renamed vm_get_address_space_by_id() to vm_get_address_space(), as there is
no other method of getting an address space.
* Removed erroneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26455 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the superfluous "flags" parameter from ConditionVariable::Add()
that we forgot there when we moved the flags field from
ConditionVariableEntry::Add() to Wait().
* Using this method was therefore not a good idea - only UnixFifo did, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26454 a95241bf-73f2-0310-859d-f6bbb57e9c96
disk system lists.
* Added module watching; on module changes, it will now automatically rescan
the disk systems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26368 a95241bf-73f2-0310-859d-f6bbb57e9c96
it clear when boot_splash_set_stage() must no longer be used.
* Free the memory associated with the kernel args before starting the
init process. Unlike the original TODO stated there are quite a few
more users of the kernel args (including the boot splash screen),
hence we can't really do that earlier, unless we decide to copy the
data over to the kernel heap.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26344 a95241bf-73f2-0310-859d-f6bbb57e9c96
It follows the semantics of the BFS R/W lock, though, that is, if you unlock
your write lock before the read locks, the read locks effectively become
write locks, too.
* Added a mutex_transfer_lock() function that will allow you to unlock a mutex
in a different thread than the one which locked it (only matters if KDEBUG
is enabled, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26316 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically selected at boot time. Pit and Apic timers are implemented
for now. Thanks Dustin!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26265 a95241bf-73f2-0310-859d-f6bbb57e9c96
serve, bin sizes and page size. This minimizes the amount of "large"
allocations made in heaps that don't have a bin for the allocation size
(combining multiple pages). This is desirable as such large allocations
are generally pretty inefficient, and also because it separates larger from
smaller allocations better, making the chance of a heap becoming empty higher.
For now there are three heap classes "small", "large" and "huge", with a
predefined set of bin sizes for each. This might need some finetuning later on.
Reduce the grow size to 4MB though as the allocations should now be spread
across heap classes which each grow on their own.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26210 a95241bf-73f2-0310-859d-f6bbb57e9c96
the newly found disk systems.
* _ScanPartition() now allows to restrict the disk systems to a predefined set.
* _ScanPartition() now even scans partitions that already have a disk system
assigned; if a better one is found, the existing one is replaced. It will
ignore mounted or partitions with children, though.
* KPartition now also stores the priority of the disk system assigned to it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26177 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Use the platform object to determine the platform type in system_info.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26166 a95241bf-73f2-0310-859d-f6bbb57e9c96
per cache.
* Changed the strategy vm_cache_acquire_page_cache_ref() uses to ensure
that the cache isn't deleted while trying to get a reference. Instead
of the global cache pages hash table lock, it holds the global cache
list lock now. We acquire + release this lock in delete_cache() after
removing all pages and just before deleting the object.
* Some small optimizations using the property that the cache's pages are
ordered, now (vm_cache_resize(), vm_page_write_modified_page_range(),
vm_page_schedule_write_page_range()).
* Replaced some code counting a cache's pages by simply using
vm_cache::page_count.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26160 a95241bf-73f2-0310-859d-f6bbb57e9c96
D. Sleater. Also added a IteratableSplayTree class that extends
SplayTree, additionally maintaining a singly-linked list, thus allowing
for efficient forward iteration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26159 a95241bf-73f2-0310-859d-f6bbb57e9c96
always returned B_OK) by a Init() method, which sets the initial size
and returns an error, if that fails.
* Adjusted code using the classes accordingly. Replaced a few
InitCheck() methods in the network code by Init().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26127 a95241bf-73f2-0310-859d-f6bbb57e9c96
a flattened argument/environment buffer now. This simplifies the work
for the kernel a bit, since it can just copy the buffer and check
whether it looks OK instead of messing around with individual strings.
The runtime loader also gets a flattened array.
* Set the maximum size of the arguments/environment buffer to 128 KB.
When more arguments are passed, we fail with a proper error code
(instead of just truncating the arguments as before).
* On exec*() the first argument was silently replaced by the given path
name, which is not correct.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26119 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove unneeded include to make those usable by bootloader.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26117 a95241bf-73f2-0310-859d-f6bbb57e9c96
- kernel_m68K almost links now, jsut bails out on the linker script...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26096 a95241bf-73f2-0310-859d-f6bbb57e9c96
- we'll just use decimal chip number (68030, ...) to identify cpu, fpu, and mmu for simplicity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26041 a95241bf-73f2-0310-859d-f6bbb57e9c96
waiting for a heap grow.
* Use that nogrow version in the VM code to avoid a deadlock with the address
space lock when a grow operation would try to create an area while a malloc
happened from such a function in the VM.
* When waiting for a grow to happen, notify the waiting thread from the grower
also if it failed to allocate a new heap. Otherwise a thread would just sit
there and wait until another thread requested growing too and that one
succeeded (or just forever in the worst case).
* Make the dedicated grow heap growable too. If the current grow heaps run low
on memory it will instruct the grower to allocate a new grow heap. This
reduces the likelyhood of running out of memory with no way to grow to a
minimum. As the growing is done asynchronously it is still possible to
happen, but it is highly unlikely as the grow heap is solely used to
allocate memory in the process of creating new heap areas and it will even
try using normal public memory if the dedicated memory has run out.
* Reduced the dedicated grow heap from 2 to 1MB. As it can now grow itself, it
doesn't need to last so long.
* Extract heap creation into it's own function that does area creation and heap
attach and use this function for growing normal and grow heaps.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26009 a95241bf-73f2-0310-859d-f6bbb57e9c96
and remove the then unneeded mutex_init() for them.
* Remove the workaround for allowing uninitialized mutexes on kernel startup.
As they are all initialized statically through the MUTEX_INITIALIZER() now
this is not needed anymore.
* An uninitialized mutex will now cause a panic when used to find possibly
remaining cases.
* Remove now unnecessary driver_settings_init_post_sem() function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25812 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleanup the license header and add authors
* Sort the available keymaps list in the config file and add 'dv'
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25806 a95241bf-73f2-0310-859d-f6bbb57e9c96
keymap there too.
* Add a config header where one can select what KDL keymap should be used
(currently only 'us' and 'sg' are available though).
* Provide a third keymap that is used when the alt modifier is used (the swiss
german keymap is pretty useless without alt as all the useful keys like
backslash and curly braces use alt).
Our KDL is so powerful and nice to use, the only thing that bothered me was
that I always had to think about where some of the special keys are located in
the US keymap. So this simple compile-time keymap switching provided to be
helpful for me and might be for others too. Keymaps for other layouts obviously
have to be written before this becomes really useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25803 a95241bf-73f2-0310-859d-f6bbb57e9c96
be put into a boot_item in frame_buffer_console_init().
* The VESA driver now supports gettings the EDID information as well; this
is necessary now, since the app_server no longer takes over the mode the
boot loader had chosen.
* Note, we might want to do this via vm86 instead in the future, and remove
the kernel part again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25786 a95241bf-73f2-0310-859d-f6bbb57e9c96
file for hpet implementation. Not yet added to the build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25773 a95241bf-73f2-0310-859d-f6bbb57e9c96
B_DEBUG_SPINLOCK_CONTENTION is defined to 1. It typedefs spinlock to a
structure (thus breaking BeOS binary compatibility), containing a
counter which is incremented whenever a thread has to wait for the
spinlock.
* Added macros for spinlock initialization and access and changed
code using spinlocks accordingly. This breaks compilation for BeOS --
the macros should be defined in the respective compatibility wrappers.
* Added generic syscall to get the spinlock counters for the thread and
the team spinlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25752 a95241bf-73f2-0310-859d-f6bbb57e9c96
pipes in the shell, though the semantics is a little different: The
second command is invoked whenever the first command has written a
complete line. The line is passed as last argument to the second
command. The new command flag B_KDEBUG_PIPE_FINAL_RERUN causes the
second command to be invoked again (with NULL argument) after the
first command is done.
* Added kprintf_unfiltered() and kputs_unfiltered() which bypass the
pipe mechanism and directly print to the bluescreen/serial output.
* Moved most commands from debug.cpp to the new
debug_builtin_commands.cpp.
* B_KDEBUG_DONT_PARSE_ARGUMENTS commands don't get an argument anymore,
if it would consist of white space only.
* Added new debugger command return value B_KDEBUG_ERROR, which
indicates that executing the command failed. This return code will
abort a complete pipe.
* Since debugger commands can nest (i.e. one command can invoke another
one) the setjmp()/longjmp() mechanism to restore the stack after a
page fault in a command needs more than one jump buffer.
* Added abort_debugger_command(), which longjmp()s out of the currently
executed command. This will also abort the current pipe.
* When pagination is enabled pressing "a" will abort the running command
(as opposed to "q" which only disables the blue screen output, but
lets the command continue).
* Added debugger commands:
- "grep" which can be used to filter output by pattern. Removed the
"filter" command and the underlying mechanism that did that before.
- "head" which prints only the first lines of output of another
command.
- "wc" counts lines, words, and characters of another command's
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25744 a95241bf-73f2-0310-859d-f6bbb57e9c96
remains. This replaces the previous mechanism of switching the thread to
a dedicated death stack. We might consider moving more cleanup work to
the undertaker, but that seems a little more involved.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25704 a95241bf-73f2-0310-859d-f6bbb57e9c96
than a semaphore, and can already be used in the early boot process.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted code using recursive locks respectively. The initialization
cannot fail anymore, and it is possible to use recursive locks in the
early boot process (even uninitialized, if in BSS), which simplifies
things a little.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25687 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use vm86 mode to call the VESA BIOS to do the actual mode switching by
providing an ioctl in the vesa driver.
* Fix vm86.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25680 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved devfs from fs/ to device_manager/, and separated the legacy driver
support from it.
* Removed fast_log module.
* There are a couple of (temporary) regressions, though:
- legacy SATA and ISA IDE support is disabled, the drivers haven't been
ported yet.
- The not yet used ATA bus manager hasn't been ported yet, either.
- AHCI changes have not been tested.
- the listdev command has been removed from the build (as it currently
doesn't work anymore).
- device manager generated IDs currently are not freed anymore when a device
node is removed.
- generic drivers can't yet use the new driver architecture.
- simple busses that do not support device types won't work yet.
- legacy driver publishing/unpublishing (ie. what USB needs) has not been
tested, and may be broken.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25662 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_write_modified_pages(), save that it only writes pages in the
given range.
* Added vm_page_schedule_write_page_range() which schedules all modified
pages in the given cache's range for writing by the page writer.
* Added _kern_sync_memory() syscall and the msync() POSIX function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25620 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The new function vm86_do_int(struct vm86_state *state, uint8 vec) provides a
facility to call BIOS interupt handlers. The function must only be called from
a user thread context because the lower 1MB of the address space is used.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25610 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a "fault_callback" to the thread structure which is called when a
unhandled page fault happens in user space. A SIGSEGV will only be sent
if the callback returns "true".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25609 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In vm86 mode CS will have arbitrary values so we check for both USER_CODE_SEG
and the VM flag in EFLAGS. This is also done when entering interrupt gates.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25607 a95241bf-73f2-0310-859d-f6bbb57e9c96
compatible with what our code assumed (pointers to objects of
TraceEntry and its POD base class trace_entry aren't identical
anymore).
* Added optional stack traces for ktrace_printf() output in the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25531 a95241bf-73f2-0310-859d-f6bbb57e9c96
Changed condition variables so that it is allowed to block (e.g. lock
mutexes etc.) between Add() and Wait(). This fixes#2059, since the
block writer used them this way and could thusly fail to wait for a
condition variable, causing a temporary stack object to be used past its
lifetime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25525 a95241bf-73f2-0310-859d-f6bbb57e9c96
to contain headers shared by kernel and userland (mainly libroot).
* Moved quite a few private kernel headers to the new location. Split
several kernel headers into a shared part and one that is still kernel
private. Adjusted all affected Jamfiles and source in the standard x86
build accordingly. The build for other architectures and for test code
may be broken.
* Quite a bit of userland code still includes private kernel headers.
Mostly those are <util/*> headers. The ones that aren't strictly
kernel-only should be moved to some other place (maybe
headers/private/shared/util).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25486 a95241bf-73f2-0310-859d-f6bbb57e9c96
address space that is fully locked and marked B_KERNEL_AREA. It can
thus be accessed by the kernel without additional checks.
* For each userland thread we do create a user_thread structure in that
area. The structure is accessible from userland via TLS, using the
private get_user_thread() function.
* Introduced private userland functions [un]defer_signals(). They can be
used to cheaply disable/re-enable signal delivery. They use the
user_thread::defer_signals/pending_signals fields which are
checked/updated by the kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25451 a95241bf-73f2-0310-859d-f6bbb57e9c96
changes to the area (delete, resize, clone) from userland.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BDiskDeviceRoster::GetDiskSystem() method, that can get a disk system
by short/pretty/module name - since they should all be unique, I put them
in a single namespace, please complain if you don't like that :-)
* Cleaned up DiskSystem.h and DiskDeviceRoster.h according to the updated
header guidelines.
* Renamed ntfs pretty name from "ntfs File System" to "Windows NT File System".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25414 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments they get a single thread_creation_attributes structure now.
* Added stack_address and stack_size to thread_creation_attributes,
which allow to specify the stack size or the stack to be used for the
new user thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25389 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed operator=(): the second argument of SetTo() is a boolean (normalize),
not the length of the buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25382 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the semantics of unnamed semaphores. Before parent and child
of a fork() would always share an earlier created semaphore. Now we do
that only, if the "shared" parameter of sem_init() was true. That's
still not quite the behavior Linux and Solaris have, but should be
perfectly fine with how reasonable code would use the API.
* There's a global table for shared unnamed semaphores now. ATM a
semaphore is leaked when no one explicitly destroys it (just as with
named sems).
* Enforce per-team and global semaphore number limits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25362 a95241bf-73f2-0310-859d-f6bbb57e9c96
not supposed to be passed to pathconf() or sysconf().
* Added POSIX semaphore related macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25361 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow userland teams to create areas below 1 MB when requested specifically.
* Note, this is a temporary solution - see the comments in the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25358 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed the old kernel_posix[_arch...].o to kernel_lib_posix...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25336 a95241bf-73f2-0310-859d-f6bbb57e9c96
Realtime option group). The implementation should be complete, but is
totally untested yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25326 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Trivial adjustments of code using mutexes. Mostly removing the
mutex_init() return value check.
* Added mutex_lock_threads_locked(), which is called with the threads
spinlock being held. The spinlock is released while waiting, of
course. This function is useful in cases where the existence of the
mutex object is ensured by holding the threads spinlock.
* Changed the two instances in the VFS code where an IO context of
another team needs to be locked to use mutex_lock_threads_locked().
Before it required a semaphore-based mutex implementation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25283 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can unlock the mutex, so one bit is sufficient.
* Added cutex_init_etc() which has an additional "flags" parameter.
The only specifyable flag is CUTEX_FLAG_CLONE_NAME, which causes the
function to strdup() the given name and free() its copy in
cutex_destroy().
* cutex_destroy() does now unblock waiting threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25280 a95241bf-73f2-0310-859d-f6bbb57e9c96
name, couldn't resist :-P). It's semantically equivalent to a mutex,
but doesn't need a semaphore (it uses thread blocking and a simple
queue instead). Initialization can't fail. In fact it is ready to use
without initialization when living in the bss segment, also in the
early boot process. It's as fast as a benaphore in cases of low lock
contention, and faster otherwise. Only disadvantage is the higher
immediate memory footprint of 16 bytes.
* Changed how the "thread" and "threads" debugger commands list the
objects they are waiting for. Cutexes are also included.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25276 a95241bf-73f2-0310-859d-f6bbb57e9c96
the selecting thread, which has obviously no effect.
* Changed select_info::events to vint32. It is now updated atomically.
This removes a race condition when concurrent threads would notify at
the same time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25273 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the pointers const.
* Changed how the ARP module maintains its arp_entry::request_buffer: it
now uses the atomic_pointer*() functions to make sure there is no race
condition, and it's deleted only once.
* Getting an ARP entry would return uninitialized data, if the entry hadn't
been resolved yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25263 a95241bf-73f2-0310-859d-f6bbb57e9c96
64-bit safe version of atomic_test_and_set() for pointers:
atomic_pointer_test_and_set().
* The VFS is now using this function (it's not used anywhere else in the
kernel this way).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25260 a95241bf-73f2-0310-859d-f6bbb57e9c96
* cache paranoia was always enabled.
* Changed from paranoia on/off to levels. Adjusted the macros to take a
level argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25215 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "mode" parameter to set_paranoia_check(), which specifies
whether the check is supposed to already exist/not exist yet. This
allows for, as it turns out, very useful additional tests. Added
{ADD,UPDATE}_PARANOIA_CHECK macros that imply the used "mode"
parameter.
* PARANOIA_SLOT_COUNT was accidentally redefined in the source file.
* Fixed remove_paranoia_check(). It didn't remove anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25207 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added capture_tracing_stack_trace() which allocates space in the
tracing buffer and captures the stack trace according to the given
parameters.
* Added TraceOutput::PrintStackTrace() to print a stack trace thus
created.
* Added TraceEntry::DumpStackTrace() callback which is supposed to print
a stack trace for the entry, if it can do that.
* Added "--stacktrace" switch to the "traced" command, which causes the
stack traces for all entries that have one to be printed as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25205 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added support for non-published condition variables. One has to call
Init() on those, and add entries directly with the
ConditionVariable::Add() method.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25110 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Made the object pointer passed to thread_prepare_to_block() const, so
that strings can be passed without casting. Passing a string could
maybe be made a convention for THREAD_BLOCK_TYPE_OTHER.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25109 a95241bf-73f2-0310-859d-f6bbb57e9c96
respective Private* base class.
* Changed sigwait() and sigsuspend() to use thread_block() instead of a
condition variable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25100 a95241bf-73f2-0310-859d-f6bbb57e9c96
thread_block(), thread_unblock(),...) that allow a thread to wait for
something without needing a semaphore or condition variable. It can
simply block and another thread can unblock it. Supports timeouts and
interrupting. Both semaphores and condition variables use this
common mechanism, now.
* Semaphores:
- Some simplifications due to the thread blocking mechanism.
- Changed locking order to sem -> thread. It was the other way around
before and when introducing the wait_for_objects() support I had
also introduced a situation where the locking was reverse, which
could potentially cause a dead lock on SMP systems.
- Instead of queueing thread structures, a semaphore queues
queued_thread entries now, which are created on the stack. The
thread::sem structure could thus be removed.
- Added sem_entry::net_count, which is sem_entry::count plus the
acquisition count of all waiting threads. This number is needed in
remove_thread_from_sem() and instead of computing it there we
maintain it.
- Fixed remove_thread_from_sem(). It would not unblock threads, if
the sem count was <= 0.
- Made sem::last_acquirer unconditional. It is actually needed for
sem_info::latest_holder. Fixed fill_sem_info() accordingly.
- Added some optional tracing output, though only via ktrace_printf().
* Condition variables:
- Could be simplified significantly through the use of the thread
blocking mechanism. Removed a good deal of unnecessary code.
- Moved the ConditionVariableEntry "flags" parameter from Wait() to
Add(), and adjusted all places where condition variables are used
accordingly.
* snooze() uses thread_block_with_timeout() instead of a semaphore.
* Simplified thread interrupting in the signal and user debugger code.
Instead of separate functions for threads waiting on a semaphore or
condititon variable, we only have a single thread_interrupt(), now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25099 a95241bf-73f2-0310-859d-f6bbb57e9c96
- If the hook of the timer we're cancelling is currently being
executed, we do now wait till it is finished. This is how the BeBook
specifies the function to behave.
- Periodic timers would not be cancelled, if their hook was being
invoked at the same time, since they weren't in the queue during
that time.
- Since we know the CPU on which the timer is scheduled (timer::cpu),
we don't have to look through any other CPU queue to find it.
- Fixed the return value. It should report whether the timer had
already fired, and was not always doing that.
* Added private add_timer() flag B_TIMER_ACQUIRE_THREAD_LOCK. It causes
the thread spinlock to be acquired before the event hook is called.
cancel_timer() doesn't wait for timers with the flag set. Instead we
check in the timer interrupt function after acquiring the thread
spinlock whether the timer was cancelled in the meantime. Calling
cancel_timer() with the thread spinlock being held does thus avoid any
race conditions and won't deadlock, if the event hook needs to acquire
the thread spinlock, too. This feature proves handy for some kernel
internal needs.
* The scheduler uses a B_TIMER_ACQUIRE_THREAD_LOCK timer now and
cancel_timer() instead of the no longer needed
_local_timer_cancel_event().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25098 a95241bf-73f2-0310-859d-f6bbb57e9c96
kernel and added a WrapperTraceFilter* parameter, which allows for
additional filtering. This way other commands can print tracing output
with special filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25094 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable at once. It wasn't used anymore, and the code gets simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25080 a95241bf-73f2-0310-859d-f6bbb57e9c96
ones) for wait_for_child(), which is notified when any job control
condition (child dead, stopped, continued) occurs. These events are
relatively rare anyway, and it simplifies the code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25079 a95241bf-73f2-0310-859d-f6bbb57e9c96
to port_buffer_size_etc(), but returns the info through a structure,
which also identifies the sender (uid, gid, team ID) of the message.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25003 a95241bf-73f2-0310-859d-f6bbb57e9c96
and defines the macros needed by them.
* Renamed syscall sys_vm_map_file() to _kern_map_file() and changed the
path to an FD parameter. Changed vm_map_file() accordingly and
adjusted the kernel ELF loader and the runtime loader.
* Added syscall _kern_unmap_memory().
* Added bool unmapAddressRange parameter to vm_create_anonymous_area()
and map_backing_store(). If true and the address specification is
B_EXACT_ADDRESS, all areas in the specified address range will be
deleted (unless an area is covered only partially).
* Introduced B_SHARED_AREA flag, which is set on areas that have been
created by {vm,_user}_map_file() with REGION_NO_PRIVATE_MAP. When
fork()ing those areas won't be copied CoW, but rather be cloned. This
is needed for mmap() MAP_SHARED.
* {vm,_user}_map_file() also accept an FD argument < 0, in which case an
anonymous area is created.
* Implemented mmap() and munmap(). Currently there's the restriction
that we can't partially unmap areas. Otherwise the functions should be
rather compliant. We also support the non-POSIX extension
MAP_ANONYMOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24964 a95241bf-73f2-0310-859d-f6bbb57e9c96
That would explain why syscall restarts were broken. In fact there's no
reason to check the flag at all, since we know we set it.
ftp appears to work again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24918 a95241bf-73f2-0310-859d-f6bbb57e9c96
ATM.
* Changed common_fcntl() to also work for non-vnode-based FDs. Only the
operations that require a vnode do fail now. F_SETFL uses the new
fd_ops::set_flags() if available, falling back to the vnode respective
operation.
* Changed some direct accesses to file_descriptor::u::vnode. It was safe
in those cases, but might not be anymore if we ever change fd_vnode().
ftp can at least connect to servers again, now, but apparently we still
have a problem with syscall restarts -- downloads fail after one second,
when the timer goes off.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24917 a95241bf-73f2-0310-859d-f6bbb57e9c96
syscall_restart_ioctl_is_restarted() to syscall_restart_is_restarted,
IoctlSyscallFlagUnsetter to SyscallFlagUnsetter, and
IoctlSyscallRestartWrapper to SyscallRestartWrapper, as they are no
longer only used for ioctl().
* Removed unused syscall_restart_ioctl_handle_post().
* Made SyscallRestartWrapper a lot fancier. Instead of storing a
reference to the result value, it stores the value itself, and it
features all the interesting operators that make it appear like that
value. This simplifies the use of the class quite a bit.
* THREAD_FLAGS_SYSCALL is now set for all socket function and the
read[v](), write[v]() syscalls.
* Added is_syscall() function and net_stack hook to the net stack.
* Removed "kernel" parameter from all net_stack_interface and net_socket
module hooks. They aren't need any longer, since is_syscall() can be
used instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24914 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The net_stack driver is no longer used. Instead we have a kernel
module which is directly used by syscall implementations in the
kernel. I.e. we no longer tunnel those functions through ioctls, but
have normal syscalls.
- Removed the superfluous net starter module.
- Implemented the FDTYPE_SOCKET type file_descriptors, that is sockets
are no longer vnode based.
- Adjusted libnetwork (the socket function implementations)
accordingly.
- Adjusted netstat accordingly.
* Socket module:
- Implemented socketpair().
- Added "kernel" parameter to the control hook. Quite a few more hooks
would actually need the parameter, but I didn't change those yet,
since that would probably also require changes to the protocol
module interface.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24908 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Revised the RLE algorithm used for compressing the boot splash artwork to
handle uncompressed runs.
* Compress the RGB channels separately for improved efficiency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24844 a95241bf-73f2-0310-859d-f6bbb57e9c96
FIFO. Reimplemented pipe() to use it.
* pipefs is no longer mounted. Will remove the superfluous code soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24823 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved most file_system_module_info hooks into separate structures.
Those that operate on mounted volumes to fs_volume_ops, those
operating on a vnode to fs_vnode_ops.
- Got rid of the fs_volume, fs_cookie, fs_vnode typedefs. We use void*
again.
- Instead of a void* volume and node cookie hooks are passed a
fs_volume and fs_vnode structure pointer, which contain the cookie
and an ops pointer (fs_volume a few more things).
- The VFS {new,publish,get,...}_vnode() functions take a fs_volume*
instead of the volume ID. So does vfs_get_fs_node_from_path().
- Added type and flags arguments to publish_vnode() and the
get_vnode() hook and removed the type argument from lookup() hook.
Added vnode::type using formerly unused bits to store the node type.
Simplified a few things in the VFS due to the now always available
node type.
- Added fs_volume_ops::{create,delete}_sub_vnode() and
fs_vnode_ops::get_super_vnode() hooks. They are used to support file
system layers, e.g. allowing to extend an FS not supporting BeOS
attribute with attribute support. Needs some more work in the VFS.
- Added fs_vnode_ops::create_special_node() hook for creating special
nodes (e.g. FIFOs).
* Adjusted the built-in file systems and BFS according to the interface
changes. Removed all other FSs from the image for the time being.
We'll see whether further API changes are necessary before porting
them.
* Adjusted the bfs_shell accordingly.
* Implemented create_special_node() in rootfs to support special nodes.
* Added support for FIFOs:
- Added syscall _kern_create_fifo() (used by mkfifo()), which creates
a special node (type S_IFIFO) in the respective file system.
- When a special node is published the VFS creates a respective sub
node. Currently only FIFOs are supported.
- Added a little support for FIFO subnodes by using functionality from
the pipefs.
- Added mkfifo to the image. It can create FIFOs in the rootfs, but
the FIFOs aren't really usable ATM, since they still work like
pipes, i.e. readers and writers need to have them open at the same
time.
* Some smaller changes in the VFS:
- Made the *_CALL macros nicer to use (vargs).
- Refactored FS entry lookup into new function lookup_dir_entry().
- create_vnode() no longer just calls the FS create() hook. First it
looks up the entry and uses open_vnode(), if it already exists. This
is necessary for two reasons: 1) The FS might not support create()
while still allowing to open() entries. 2) When the FS has other
layers on to of it (or the respective node) it might not be
responsible for opening the node.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24816 a95241bf-73f2-0310-859d-f6bbb57e9c96
and ino_t instead of a path. Supposed to work with node monitoring messages.
Took the name from vfs_entry_ref_to_path() that takes the same arguments, but
suggestions for a better name are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24813 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented RLE compression for the boot splash images, resulting in
smaller kernel and boot loader.
* Only the boot loader contains the RLE compressed images, the decompressed
buffer for the icons is passed to the kernel via kernel args.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24812 a95241bf-73f2-0310-859d-f6bbb57e9c96
The dividing line is back although with a little more spacing. Also the icon
spacing is a little increased and I added a subtle outline as well as a little
brighter background for the active icon look. The placement logic is now not
independant of each other anymore, otherwise I couldn't center both images
as a unit. But only the vertical placement is affected.
Comments as always on the commit mailing list... :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added {Create|Delete}Device() analogous to {Create|Delete}FileDevice
* Added a small DeviceWatcher class that reacts to entry creation/removal
* Implemented a way to start/stop node monitoring
* Start watching for devices after the boot volume has been mounted and the
the second initial scan was run
The disk device manager now creates and scans a device when a "raw" node is
published and deletes the device on removal. This makes hot-plugging of disk
devices (for example memory sticks using usb_disk) work. Their partitions will
be scanned and published so they can be mounted. Somehow the removal of the
partitions does not yet work however, any insights are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24777 a95241bf-73f2-0310-859d-f6bbb57e9c96
the icons are centered.
* The boot loader and kernel now use the placement info that
generate_boot_screen now generates.
* Made the code that draws the images handle the case where any of the images
is larger than the frame buffer.
* All drawing functions need to know the image width (analogous for bytes per
row).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24773 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Not sure if it works as intended, as the specs are a bit vague.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24717 a95241bf-73f2-0310-859d-f6bbb57e9c96
item entry.
* The bios_ia32 video platform code now stores the available VESA modes in
the new vesa_modes kernel_args field.
* When configuring a VESA mode via settings file, it's no longer needed to
specify the exact mode - the closest available mode is now used. This should
help with bug #1962.
* frame_buffer_console_init() now also creates a boot_item for the VESA modes
in the kernel_args.
* The VESA accelerant now filters the mode list to only contain modes that
are actually supported.
* Moved non-shared vesa driver data into its own file vesa_private.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24675 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Added a "root" vnode to the io_context. It is used for resolving
paths and converting nodes to paths instead of sRoot. Some more
passing around of io_context structures was necessary.
- Introduced a new lock sIOContextRootLock to protect
io_context::root. The current uses of io_context::io_mutex
(put_vnode(), remove_vnode() while holding it) looked too suspicious
to use that mutex in vnode_path_to_vnode().
- Added _kern_change_root() syscall and chroot() libroot function.
- Added chroot coreutils program to the image. Funnily it seems to be
much easier to set up a little jail than under Linux (just copy
bash and libroot.so into respective subdirs; mount another pipefs
if you want pipe support).
With Haiku allowing direct access to directories via inode IDs
jailing is obviously not very secure at the moment.
- Added /var/empty to the image. It will be the chroot target for ssh.
* Changed vfs.cpp:get_cwd() so that the io_context::io_mutex is no
longer held when calling dir_vnode_to_path().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24673 a95241bf-73f2-0310-859d-f6bbb57e9c96
- The kernel stores the group IDs in the team structure. They are
correctly inherited on fork() and load_image_etc().
- Implemented getgroups() for real, i.e. it retrieves the groups
associated with the process.
- Implemented setgroups(), initgroups() and (the BSDish)
getgrouplist(). The latter two read the group information from the
"group database" /etc/group (if existing).
- Change the BIND port config, since we do have getgrouplist() now.
* The set-uid feature was broken when the path to the executable was
relative, since we used stat(), which, in the kernel, uses the kernel
IO context.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24669 a95241bf-73f2-0310-859d-f6bbb57e9c96
reference counted memory allocations. Can be used for sharing immutable
structures.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24666 a95241bf-73f2-0310-859d-f6bbb57e9c96
finally created a solution to avoid that: Header files that contain
configuration settings (and nothing else) go to build/config_headers.
To change settings, create a directory build/user_config_headers (which
is ignored by svn), copy the respective header there and modify it at
your leisure. Currently only tracing_config.h has been moved to the new
location, but more files will follow eventually. It is also recommended
to move optional macro definitions in Jamfile (as for BFS) to a config
header instead; the build system will then automatically rebuild on
changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24611 a95241bf-73f2-0310-859d-f6bbb57e9c96
a call chain contains a specific symbol (or address).
* Added a new KDL command "calling" that you can use to get a list of
threads that have a specific function in their call chain.
* Removed extraneous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24594 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add a cached_pages field to the system_info structure, and change the
meaning of the used_pages field to not include cached pages.
* Provide the needed info using the new calls vm_get_available_memory(),
and vm_page_num_available_pages().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24571 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Take extended family and model into account when generating the cpu
type and revision.
- Added Intel Core 2 Extreme to the cpu list.
Please review.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24509 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The boot splash code now checks wether debug screen output is enabled or not
using the above function.
* The boot splash code no longer maps it's own copy of the frame buffer, instead,
it will use the boot item feature as the VESA driver does. Also removed the
lock, as that's not needed at all.
* Renamed splash.cpp to boot_splash.cpp, and boot/splash.h to boot_splash.h
(it's not part of the boot loader, but the kernel).
* Removed dead code from boot_splash.cpp, added license. Replaced license
header in boot_splash.h to a style guide conforming one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24489 a95241bf-73f2-0310-859d-f6bbb57e9c96
executable permissions of the file by hand. We use _kern_access()
instead, which also handles the root case correctly.
* The user and group arguments of test_executable() aren't needed any
longer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24483 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed the icons image, it was upside down.
* Support the new 24 bit boot screen images in the boot_loader and the kernel.
* Prepare the code for future indexed versions of the boot screen images.
But the generate_boot_screen tool currently does not generate those.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24449 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Calculate icon offset from stage in splash.cpp, remove hard coded placement
values. Draw only icon, not the whole image from top/left to right of
icon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24439 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added the feature of an animated boot screen (icons lighting up at
different boot stages).
* Added first version of new boot splash images, generated by the new
hsbg tool. (Also finally contains the "new" Haiku logo.)
changes by myself:
* Added Artur to the contributors list in About System.
* Fixed some left overs in the patch, kept tracing turned off.
TODO:
* Remove the need for hard coding the icon positions. (Maybe generate
those from hsbg and put them into images.h? Have user provide icon
spacing/offsets at the command line for hsbg?)
* Rename the stages to something meaningful.
* Use hsbg as a build system tool and generate images.h during build
from PNGs provided in the artwork folder.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24434 a95241bf-73f2-0310-859d-f6bbb57e9c96
structure. They are properly inherited and updated on
fork(), load_image(), and exec().
* Implemented the get[e]{u,g}id(), set[[r]e]{u,g}id() family for real.
* getgroups() also calls the kernel now, but only returns the effective
group ID. Supplementary groups support is still missing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24359 a95241bf-73f2-0310-859d-f6bbb57e9c96
as the death entries of a deceased processes that were in this group
and have not yet been reaped hold references to the group, so that it
won't be deleted until the group is empty and all gone group members
have been reaped. This fixes#1799 at last.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24335 a95241bf-73f2-0310-859d-f6bbb57e9c96
in code that has interrupts disabled. The chunks of memories are queued
and free()d periodically by a kernel daemon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24332 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the resolved ToDo, but could probably be made more efficient. Instead of
transfering the area, the area is cloned into the target teams' address space
and the original is deleted. This generates a new area_id for the transfered
area (as suggested by the ToDo). Updated syscall prototypes according to the
status_t to area_id return type change.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24320 a95241bf-73f2-0310-859d-f6bbb57e9c96
options.
* module_init() now sets sDisableUserAddOns to whatever the safemode settings
say, ie. the B_SAFEMODE_DISABLE_USER_ADD_ONS setting is now respected by
the module code.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24315 a95241bf-73f2-0310-859d-f6bbb57e9c96
* driver_entry::api_version now stores the actual version instead of a
pointer to it.
* Renamed node_path_entry to path_entry and reused it for driver
reloading: handle_driver_events() will now also check for drivers to
add in the sDriversToAdd list.
* Added new devfs_driver_added(), and devfs_driver_removed() functions
that trigger certain driver actions.
* Implemented notifying devfs on B_ENTRY_CREATED, B_ENTRY_REMOVED, and
B_ENTRY_MOVED events in probe.cpp. The watched directory inode numbers
are now stored in a hash for B_ENTRY_MOVED.
* unpublish_driver() did not actually delete the node, it only marked
it removable since we never get/put the node. We now do, and so the
node is actually removed as intended.
* Added "devfs_driver" KDL command.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24152 a95241bf-73f2-0310-859d-f6bbb57e9c96
and made it public (within the kernel).
* _user_entry_ref_to_path() is now using that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24151 a95241bf-73f2-0310-859d-f6bbb57e9c96
negative relative timeout would be converted to B_INFINITE_TIMEOUT.
For some reason the ScreenSaver preflet is snooze()ing with such
a value.
* Some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24080 a95241bf-73f2-0310-859d-f6bbb57e9c96
utilizes the THREAD_FLAG_DONT_RESTART_SYSCALL (but only in SIGCONT
for now).
* resume_thread() is now using that flag to be compatible with BeOS.
* This fixes the Terminal hanging on close.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24045 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added team::flags. Currently only used for setting a flag when a team
has exec()ed.
* Some improvements of _user_setpgid():
- It failed incorrectly when the target process was a process group
leader. According to the standard it shall fail when the process is
a session leader. Moving a process group leader to another process
group is fine, even if that leaves the group leaderless.
- Fixed race conditions. We need to recheck the error conditions when
we hold the team spinlock. Otherwise the situation could change
while we allocated the new process group. This was one of the
reasons for bug #1799 -- after the shell fork()'s both parent and
child invoke setpgid() for the child.
- Fixed behavior for pid == pgid. It doesn't necessarily mean that a
new group has to be created.
- Fixed update of target process group orphaned state.
- Squashed TODO: setpgid() on a child is supposed to fail after the
child has exec()ed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24041 a95241bf-73f2-0310-859d-f6bbb57e9c96
This eliminates the edge case where the grow thread would not be able to create
a new area because no memory could be allocated for the allocation of the area.
As this case cannot happen anymore, it is also not possible to deadlock in
memalign. Therefore the timeout (which would only have prevented the deadlock
but wouldn't have solved the edge case anyway) has been removed too.
Add options to dump the dedicated grow heap and to only print the current heap
count to the "heap" debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23994 a95241bf-73f2-0310-859d-f6bbb57e9c96
but there's a special handling for 0 us relative timeouts. Syscalls
usually return B_WOULD_BLOCK instead of B_TIMED_OUT in this case, and
callers might explicitely check for it. Hence we don't convert 0 us
timeouts anymore. gdb works again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23989 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented automatic syscall restarts:
- A syscall can indicate that it has been interrupted and can be
restarted by setting a respective bit in thread::flags. It can
store parameters it wants to be preserved for the restart in
thread::syscall_restart::parameters. Another thread::flags bit
indicates whether it has been restarted.
- handle_signals() clears the restart flag, if the handled signal
has a handler function installed and SA_RESTART is not set. Another
thread flag (THREAD_FLAGS_DONT_RESTART_SYSCALL) can prevent syscalls
from being restarted, even if they could be (not used yet, but we
might want to use it in resume_thread(), so that we stay
behaviorally compatible with BeOS).
- The architecture specific syscall handler restarts the syscall, if
the restart flag is set. Implemented for x86 only.
- Added some support functions in the private <syscall_restart.h> to
simplify the syscall restart code in the syscalls.
- Adjusted all syscalls that can potentially be restarted accordingly.
- _user_ioctl() sets new thread flag THREAD_FLAGS_IOCTL_SYSCALL while
calling the underlying FS's/driver's hook, so that syscall restarts
can also be supported there.
* thread_at_kernel_exit() invokes handle_signals() in a loop now, as
long as the latter indicates that the thread shall be suspended, so
that after waking up signals received in the meantime will be handled
before the thread returns to userland. Adjusted handle_signals()
accordingly -- when encountering a suspending signal we don't check
for further signals.
* Fixed sigsuspend(): Suspending the thread and rescheduling doesn't
result in the correct behavior. Instead we employ a temporary
condition variable and interruptably wait on it. The POSIX test
suite test passes, now.
* Made the switch_sem[_etc]() behavior on interruption consistent.
Depending on when the signal arrived (before the call or when already
waiting) the first semaphore would or wouldn't be released. Now we
consistently release it.
* Refactored _user_{read,write}[v]() syscalls. Use a common function for
either pair. The iovec version doesn't fail anymore, if anything could
be read/written at all. It also checks whether a complete vector
could be read/written, so that we won't skip data, if the underlying
FS/driver couldn't read/write more ATM.
* Some refactoring in the x86 syscall handler: The int 99 and sysenter
handlers use a common subroutine to avoid code duplication.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23983 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Tracing of allocations, reallocations and frees
* Leak checking infrastructure to dump allocations
The leak checking code records the team and thread id when an allocation is
made as well as stores the originally requested size. It also adds the
"allocations" debugger command that can dump all current allocations (usually
a huge list) or filter by either a team or thread id. This way it's easily
possible to find leftover allocations of no more active teams/threads.
Combined with the tracing support one might be able to track down the time and
reason of an allocation and possibly find the corresponding leak if it is one.
Note that kernel heap leak checking has to be enabled manually by setting the
KERNEL_HEAP_LEAK_CHECK define to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23953 a95241bf-73f2-0310-859d-f6bbb57e9c96
and pages are now kept in lists as well. This allows to return free pages once
a bin does not need them anymore. Partially filled pages are kept in a sorted
linked list so that allocation will always happen on the fullest page - this
favours having full pages and makes it more likely lightly used pages will get
completely empty so they can be returned. Generally this now goes more in the
direction of a slab allocator.
The allocation logic has been extracted, so a heap is now simply attachable to
a region of memory. This allows for multiple heaps and for dynamic growing. In
case the allocator runs out of free pages, an asynchronous growing thread is
notified to create a new area and attach a new heap to it.
By default the kernel heap is now set to 16MB and grows by 8MB each time all
heaps run full.
This should solve quite a few issues, like certain bins just claiming all pages
so that even if there is free space nothing can be allocated. Also it obviously
does aways with filling the heap page by page until it overgrows.
I think this is now a well performing and scalable allocator we can live with
for quite some time. It is well tested under emulation and real hardware and
performs as expected. If problems come up there is an extensive sanity checker
that can be enabled by PARANOID_VALIDATION that covers most aspects of the
allocator. For normal operation this is not necessary though and is therefore
disabled by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23939 a95241bf-73f2-0310-859d-f6bbb57e9c96
function has the old behavior. When false, it just calls the scheduler
without any priority adjustment or other stuff.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23906 a95241bf-73f2-0310-859d-f6bbb57e9c96
TraceOutput for output options instead.
* Added "traced" option --difftime. Instead of the absolute system time
it prints the difference time to the previously printed entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23864 a95241bf-73f2-0310-859d-f6bbb57e9c96
(must also compare to BSD; I've looked at their sources, but I might have
missed something).
* Added sys/file.h and the flock() system call.
* common_fcntl() could forget to put back the file descriptor on some error
conditions (I guess we should introduce and use a DescriptorGetter class).
* Cleaned up fcntl.h, moved the BSD extensions S_IREAD and S_IWRITE to
sys/stat.h where they belong, and added the missing S_IEXEC to them.
* Added some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While this is not a really good idea for a lock with supposedly little
contention, but it'll fix bug #1731. I haven't tested it yet, but will
do so in a minute :-)
* I will need to rework the slab anyway so that it's possible to use it
as a replacement for our heap, and then I'll switch back to a benaphore
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23822 a95241bf-73f2-0310-859d-f6bbb57e9c96
destination of the message and it's "what" field are stored. It might be
nice to also get some info about its fields -- maybe as an additional
option.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23810 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
For commands with this flag set, the parser won't parse the
arguments provided (it will only check for matching parentheses and
brackets), but will pass the unparsed argument list string to the
command instead.
* Set the new flag for the "expr" command, so one doesn't have to quote
the expression to evaluate anymore (or put it in parentheses).
* Fixed tokenizing of quoted and unquoted strings in expression mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the public hash_grow() function again (at least for now, it's only
private).
* Removed the newSize argument from hash_grow(); it will compute the new size
automatically.
* The block cache is now using hash_insert_grow() instead of hash_insert()
which should make hash lookups much faster with some 10 thousand blocks,
also increased the initial table size from 32 to 1024...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23692 a95241bf-73f2-0310-859d-f6bbb57e9c96
kSyscallParametersInfos to kExtendedSyscallInfos) and added "name"
field. Now the classes for syscall kernel tracing don't need to lookup
the syscall function symbol anymore, which speeds up printing/filtering
of those entries dramatically.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23687 a95241bf-73f2-0310-859d-f6bbb57e9c96
is recorded in a kernel trace entry (if tracing is enabled).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "printteam" switch to "traced" command, enabling the printing of
the team ID.
* Added "team" filter to the "traced" command expression language.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23684 a95241bf-73f2-0310-859d-f6bbb57e9c96
write code aligned to what one has written in the comment (or the
other way around).
* Made trace_entry structure doubly linked, by introducing a
previous_size member. By using bit fields, shrinking the flags field
to 4 bits, and not saving the lower two bits of size and previous_size
(which are always 0 due to alignment), the structure remains 4 byte
sized and can still address the same entry size.
* kBufferSize is no longer one less than it could be.
* "traced" command:
- Use static variable for the iteration state rather then cluttering
the temporary debug variable name space.
- The <count> parameter can now be negative, in which case the entries
before (and including) <start> are printed.
- Added a new optional parameter, specifying the maximal number of
entries to be filtered. Filtered iteration is beautifully
comfortable now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23678 a95241bf-73f2-0310-859d-f6bbb57e9c96
command usage texts, which can be too long for kprintf().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23677 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add platform methods for timer as it is platform dependent.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23673 a95241bf-73f2-0310-859d-f6bbb57e9c96
boolean operators ("not", "and", "or") and filters matching thread IDs
or contained strings.
I'm still not fully happy with the command. It should be possible to
define a filter and then comfortably scroll through the matching
entries. Currently having to specify an index range of the unfiltered
entries is rather unhandy in combination with filtering.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23658 a95241bf-73f2-0310-859d-f6bbb57e9c96
So now there's a central place to enable tracing in general and for
individual components.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23645 a95241bf-73f2-0310-859d-f6bbb57e9c96
used it for an hour or so, I really wonder how we could live without it.
:-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23640 a95241bf-73f2-0310-859d-f6bbb57e9c96
about syscall parameters. Particularly interesting is a type_code field
for each parameter. The mechanism isn't very accurate, but we can
classify everything in string, pointer, and integer types.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23618 a95241bf-73f2-0310-859d-f6bbb57e9c96
add_debugger_command(), but additionally takes parameters "usage"
and "flags".
* Added add_debugger_command_alias() which creates another name for an
existing command.
* Added print_debugger_command_usage() to print a command's usage.
* invoke_debugger_command() intercepts invocations with "--help" and
prints the command's usage text, if it is known. If unknown, the
command will be called normally.
* Made use of the new functions in debug.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23573 a95241bf-73f2-0310-859d-f6bbb57e9c96
a command is executed anymore. Instead the least recently used
temporary variable is overwritten, if there's no free slot for a new
temporary variable.
* Removed the special handling for the command result variable ("_"). It
just works like any other temporary variable, now.
* Individual temporary variables can be removed (e.g. using the "unset"
command).
* Added unset_all_debug_variables() and "unset_all" command to unset
all persistent and temporary variables.
* Removed remove_all_temporary_debug_variables and renamed
remove_debug_variable() to unset_debug_variable().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23568 a95241bf-73f2-0310-859d-f6bbb57e9c96
* As a temporary work-around for the current slab allocator's area usage,
I added the CACHE_LARGE_SLAB flag, which will force the allocator to
use larger areas.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23564 a95241bf-73f2-0310-859d-f6bbb57e9c96
that is a little more powerful than BeOS'. It features:
- Persistent and temporary uint64 variables. The former kind is set
only by the user. The latter (those prefixed "_") can be set
automatically by commands, thus e.g. making it easier to access
members of a dumped structure. They are unset when the next command
is invoked. The special temporary variable "_" is defined as a
command's return value.
- Expressions can contain nested command invocations using brackets
("[ ... ]").
- Command lines are parsed by the expression parser, too. They can
contain command invocations (in brackets) and expressions (in
parentheses).
* Added debugger commands:
- expr: Evaluates the given expression and prints the result.
- unset: Undefines a variable.
- vars: Prints the values of all defined variables.
* Moved debugger command code into its own source file.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23546 a95241bf-73f2-0310-859d-f6bbb57e9c96
As (our) gcc unfortunately uses atexit() to clean up lazily initialized static
variables inside functions we have to ensure that we do the right thing with
unloadable shared objects. In case a shared object was unloaded that installed
an atexit() hook the application would crash on exit. We now implement a
callback into libroot that is used to call all the atexit() hooks of a
component that is to be unloaded. Most prominently this fixes the media_server
crash at shutdown.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23486 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added function to allocate space in the buffer.
* Dump() now fills a buffer instead of printing its data directly.
* This allows the new "#pattern" argument of the "traced" command to
work. When you're using that, the index of the trace entry is printed
out, too, so that you can then get a full dump around the hits.
* Added an AddDump() method to the AbstractTraceEntry class so that
there is no need to call the inherited function anymore.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23479 a95241bf-73f2-0310-859d-f6bbb57e9c96
will not accept if the allocator returns NULL and crashes instead
(ie. not compiling in tracing would have crashed if some module tried
to use it).
* Added total entries count to the KDL command output.
* Fixed computing the start index of the KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23460 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented an optional tracing layer that can be used in the kernel.
Nice to use if you don't have serial output or need something that doesn't
slow down the system as much.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23447 a95241bf-73f2-0310-859d-f6bbb57e9c96
23139 into trunk, with roughly the following changes (for details svn
log the branch):
* The int 99 syscall handler is now fully in assembly.
* Added a sysenter/sysexit handler and use it on Pentiums that support
it (via commpage).
* Got rid of i386_handle_trap(). A bit of functionality was moved into
the assembly handler which now uses a jump table to call C functions
handling the respective interrupt.
* Some optimizations to get user debugger support code out of the
interrupt handling path.
* Introduced a thread::flags fields which allows to skip handling of
rare events (signals, user debug enabling/disabling) on the
common interrupt handling path.
* Got rid of the explicit iframe stack. The iframes can still be
retrieved by iterating through the stack frames.
* Made the commpage an architecture independent feature. It's used for
the real time data stuff (instead of creating a separate area).
* The x86 CPU modules can now provide processor optimized versions for
common functions (currently memcpy() only). They are used in the
kernel and are provided to the userland via commpage entries.
* Introduced build system feature allowing easy use of C structure
member offsets in assembly code.
Changes after merging:
* Fixed merge conflict in src/system/kernel/arch/x86/arch_debug.cpp
(caused by refactoring and introduction of "call" debugger command).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23370 a95241bf-73f2-0310-859d-f6bbb57e9c96
resized but still had dirty pages to be written back,
vm_cache_resize() (which is called with the inode lock being held)
deadlocked with the page writer.
* Now, I reintroduced busy_writing: it'll be set by everything that
writes back pages (vm_page_write_modified(), and the page writer),
and will be checked for in vm_cache_resize() - other functions are not
affected for now, AFAICT.
* vm_cache_resize() will clear that flag, and the writer will check it
again after it wrote back the page (which will fail when it's outside
the file bounds), and if it's cleared, it will get rid of the page
(if the file has been resized again in the mean time, writing it will
succeed then, and we'll keep the page around).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23334 a95241bf-73f2-0310-859d-f6bbb57e9c96
appear: when freeing a modified page, it wouldn't have a cache
anymore, but set_page_state_nolock() depended on it.
* To work around this, I added a vm_page_free() function, which the
caches that free modified pages have to call (but others may, too).
It will correctly maintain the sModifiedTemporaryPages counter in case
the cache has already been removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23318 a95241bf-73f2-0310-859d-f6bbb57e9c96
* ACPI is evaluated first as it also handles things like multi core or hyper threading setups
* Removed other (disabled) hyper threading code per the notes in the corresponding ToDo
* Limit the detected CPU count to 2 for now as I wasn't able to get it working in either emulation nor real hardware with more than 2 CPUs
* Added a reserved byte to the mp_config_table struct, it worked only by luck as the compiler did padding there to get to the same size
I can now boot my Core 2 Quad with two out of four processors active :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23100 a95241bf-73f2-0310-859d-f6bbb57e9c96
exit status of (non-main) threads of a team. Fixes bug #1644.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23009 a95241bf-73f2-0310-859d-f6bbb57e9c96
passes that information on to the kernel. This should fix wrong bytes per row with
certain resolutions and graphics cards.
* The boot loader now recognizes 15 bit modes that are advertised as 16 bit modes.
This should fix wrong colors in 16 bit modes on some cards.
* Reenabled setting MTRR for VESA mode - don't remember why I disabled it, but it
works fine on my test machines.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23006 a95241bf-73f2-0310-859d-f6bbb57e9c96
serial output, and puts it into the new kernel_args::debug_output field.
* syslog_init() will now check if there is anything in kernel_args::debug_output
and will put that into the syslog buffer.
* dump_block() now also prints an offset.
* Fixed warning in mmu.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23003 a95241bf-73f2-0310-859d-f6bbb57e9c96
* it now updates the partition data,
* the flags,
* and the disk geometry - and that now allows the session add-on to actually
detect a newly inserted CD.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22918 a95241bf-73f2-0310-859d-f6bbb57e9c96
device geometry.
* If SetTo() reports no media, and GetGeometry() fails, the device geometry
is now reset as well.
* KDiskDeviceManager::_ScanPartition() no longer unmarks the partition busy;
this is now done by the caller, and done independently from the outcome of
_ScanPartition(). This also fixes the problem that devices with no media
were never marked unbusy (and thus were ignored subsequently).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added vfs_unmount(), which allows unmounting by dev_t (used by the DDM).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22910 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Unmount when uninitializing a partition.
* Finished the media checker implementation, i.e. we rescan when a media
was inserted and uninitialize when ejected.
* Turned the disk device media checker from a kernel daemon into a thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22909 a95241bf-73f2-0310-859d-f6bbb57e9c96
that can be used by file systems.
* Changed the way the file cache works: instead of reading/writing to the
underlying device directly, it can now be used for any data source, ie.
also network file systems.
* As a result, the former pages_io() moved to the VFS layer, and can now be
called by a file system via {read|write}_file_io_vec_pages() (naming
suggestions are always welcomed :-)). It now gets an FD, and uses that to
communicate with the device (via its fs_{read|write}_pages() hooks).
* The file_cache_{read|write}() functions must now be called without holding
an I/O relevant file system lock. That allows the file cache to prepare the
pages without colliding with the page writer, IOW the "mayBlock" flag can
go into the attic again (yay!).
* This also results in a much better performance when the system does I/O and
is low on memory, as the page writer can now finally write back some pages,
and that even without maxing out the CPU :)
* The API changes put slightly more burden on the fs_{read|write}_pages()
hooks, but in combination with the file_map it's still pretty straight
forward. It just will have to dispatch the call to the underlying device
directly, usually it will just call its fs_{read|write}_pages() hooks
via the above mentioned calls.
* Ported BFS and FAT to the new API, the latter has not been tested, though.
* Also ported the API changes to the fs_shell. I also completely removed its
file cache level page handling - the downside is that device access is no
longer cached (ie. depends on the host OS now), the upside is that the code
is greatly simplified.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22886 a95241bf-73f2-0310-859d-f6bbb57e9c96
system by pretty name (not only module name) now.
* _user_initialize_partition() loads the disk system by pretty name.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22880 a95241bf-73f2-0310-859d-f6bbb57e9c96
K{Disk,File,Partitioning}System writing methods. It is now required
that the caller has marked the concerned partitions busy, hence we can
(read-)access them without needing a lock. The module interfaces will
will be changed to take advantage of the fact as well. The methods take a
disk_job_id instead of a KDiskDeviceJob* now, though I haven't quite
decided, whether we need it at all or just want to add a special
handling in the cases where notifications during the operation make
sense.
* Reimplemented the disk device write support syscalls (save
_user_move_partition() for which other module hooks are needed). They
call the KDiskSystem methods, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22832 a95241bf-73f2-0310-859d-f6bbb57e9c96
Abstracted cpu and mmu version dependant stuff (compatibility where are you) into ops like func arrays.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22821 a95241bf-73f2-0310-859d-f6bbb57e9c96
synchronous scanning is supported.
* Removed the disk device job support from the disk device manager.
* K{Disk,File,Partitioning}System:
- Remove querying and validation methods.
- Commented out the modification methods until their fate is decided.
* Removed obsolete _user_get_partitionable_spaces().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22799 a95241bf-73f2-0310-859d-f6bbb57e9c96
(_kern_{supports,validate}_*(), etc.).
* Adjusted the prototypes of the disk device modification syscalls.
Commented out their implementations for the time -- they'll mostly
have to be rewritten completely.
* Implemented the userland disk device jobs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22781 a95241bf-73f2-0310-859d-f6bbb57e9c96
We will use SRP (supervisor root pointer) register to hold the current thread pointer.
Its use by the pmmu is optional and I don't plan on using it.
There are 32 other bits left.
Wonder if weshouldn't use it for system_time() instead... will see, but there are no other usable regs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22696 a95241bf-73f2-0310-859d-f6bbb57e9c96
next/prev link order - that messed up the DoublyLinkedListCLink adapter.
* Since it's more likely that someone messes with the C version, the C++ version
now uses the same order than that one.
* This fixes a bug when TCP's BufferQueue tried to iterate over a list, messing
up its integrity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22676 a95241bf-73f2-0310-859d-f6bbb57e9c96
status checker now only tries to lock the manager, it won't wait anymore.
* Added MediaChanged() and UpdateMediaStatusIfNeeded() methods to KDiskDevice.
* KDiskDeviceManager::_CheckMediaStatus() now uses these new methods; it should
no longer detect removed media more than once :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22621 a95241bf-73f2-0310-859d-f6bbb57e9c96
and van Flandern (1968), instead of those inefficient loops we had before.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22557 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_reserve_pages() and vm_page_allocate_page() will now steal pages from
the inactive queue as needed.
* We currently never steal active pages anymore, but this might need to be
revised later (therefore, the page scanner never waits anymore, but uses
mutex_trylock() to lock a cache).
* The page scanner and writer now both run at normal priority - let's see how
that will work out.
* Introduced an inactive queue.
* Instead of shuffling pages around in the queue (and therefore destroying LRU)
the page stealing mechanism now uses a marker page to be able to release the
page lock without losing its position in the queue.
* The page writer now always grabs the whole release count of the semaphore, so
that there won't be a huge backlog to catch up with.
* vm_page_num_free_pages() now also includes the inactive queue as well as the
reserved pages (they are no longer regarded as free pages).
* Added a insert_page_after() function that inserts a page after another one,
needed by the marker code.
* clear_page() now gets a vm_page instead of a physical address which simplified
some code.
* Removed superfluous initialization of the queues (if those aren't zeroed on
start, we would have serious problems, anyway).
* Removed old and unimplemented dump_free_page_table() ("free_pages") KDL
command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22506 a95241bf-73f2-0310-859d-f6bbb57e9c96
it intended to. That resulted in more writable pages where you wouldn't want
them (ie. allowing the area to change pages in lower caches).
* We were losing modified pages: vm_unmap_pages() sometimes has to preserve
the modified flag (eg. when called from page fault).
* Both of these were responsible that stealing active pages would crash
applications - even if less likely, this could also have happened when
stealing inactive pages. Therefore, I've activated stealing active pages
again.
* The page writer now pushes the pages of busy vnodes to the end of the queue,
so that it won't pick them up again too soon (the vnode destruction would
be in the process of writing those pages back, anyway).
* The page thief now triggers the page writer to run once it has to steal
active pages. This might be a bit too aggressive, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22495 a95241bf-73f2-0310-859d-f6bbb57e9c96
busy vnodes.
* dir_create_entry_ref() used get_vnode() incorrectly (and could therefore
potentially prevent a file system from doing proper locking when called
from the kernel).
* The vnode_store now uses this for its acquire_unreferenced_ref()
implementation (and therefore for the page writer).
* read_into_cache() and write_to_cache() were still marked inline.
* The system will now wait 10 secs for a busy vnode before returning an error.
* It will also no longer panic in that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22485 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional partition_data* child parameter now.
* _user_get_partitionable_spaces() doesn't need to copy the buffer into
the kernel, since it is no input parameter. It also copies back the
actual partitionable spaces count on error, now -- B_BUFFER_OVERFLOW
is returned when the buffer was too small, but then the count must be
returned too.
* Fixed several instances of syscall implementations that unloaded a disk
system, although they didn't load it in the first place. This screwed
up the load count with undesirable consequences.
* _user_create_child_partition() would set the size to the supplied
offset.
* Fixed broken loop in KPhysicalPartition::CreateShadowPartition().
* KPartition::RemoveChild() notified the listeners about the wrong
event.
* Intel partitioning module:
- The *_get_partitionable_spaces() correctly return B_BUFFER_OVERFLOW
now, if the supplied buffer is too small.
- Implemented a part of pm_shadow_changed(), which creates and updates
the PartitionMap, so that the validate_*() hooks have a chance to
work at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22475 a95241bf-73f2-0310-859d-f6bbb57e9c96
* his has to be used by the page writer to make sure the vnode is still valid.
* This should have been the final nail on the Luposian bug - I haven't tested
it yet, but we'll certainly see :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22462 a95241bf-73f2-0310-859d-f6bbb57e9c96
interfere with the page thief, we always need to have reserved a page for
this upfront. I introduced a function to the vm_translation_map layer that
estimates how much pages a mapping might need at maximum. All functions that
map a page now call this and reserve the needed pages upfront.
It might not be a nice solution, but it works.
* The page thief could run into a panic when trying to call vm_cache_release_ref()
on a non-existing (NULL) cache.
* Also, it will now ignore wired active pages.
* There is still a race condition between the page writer and the vnode
destruction - writing a page back needs a valid vnode, but that might just
have been deleted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22455 a95241bf-73f2-0310-859d-f6bbb57e9c96
system initialize() hooks. It's often the only info about the
partition one needs and thus locking the partition just to get it is
no longer necessary.
* intel partitioning system:
- Removed passing around block sizes. We require 512 byte sectors
anyway. In fact using the parent partition's block size was even
wrong.
- Simplified writing the partition map sector.
- Simplified and corrected the partition map initialization.
- We don't fail identifying a partition anymore, if the partition map
contains no partitions. We would never identify a freshly
initialized partition map before.
- Made pm_identify() more intelligent: It determines the priority to
return depending on whether the partition is the device itself and
whether we have recognized child partitions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22447 a95241bf-73f2-0310-859d-f6bbb57e9c96
does no longer give partitioning systems precedence over file systems.
The one with the greater identification priority wins. ATM, if a file
system wins, we still mount the first file system that recognized the
partition at all, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22446 a95241bf-73f2-0310-859d-f6bbb57e9c96
the unmapped page.
* This is needed by everyone who calls this to make sure modifications to a
page aren't ignored. Namely, the page scanner and the page thief were
affected.
* Cleaned up locking the page's cache a bit in page_thief(); there is now
a helper class that takes care of everything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
dprintf() with the exception that it doesn't write anything to the
syslog. The reason is that syslog_write() releases a semaphore and can
therefore not be invoked when the thread spinlock is held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22428 a95241bf-73f2-0310-859d-f6bbb57e9c96
vfs_select.h, respectively moved most of it into the new kernel
private header wait_for_objects.h.
* Added new experimental API functions wait_for_objects[_etc](). They
work pretty much like poll(), but also for semaphores, ports, and
threads.
* Removed the "ref" parameter from notify_select_events() and the
select_sync_pool functions as well as from fd_ops::fd_[de]select(). It
is no longer needed. The FS interface select() hook still has it,
though -- the VFS will always pass 0.
* de]select_fd() take a select_info* instead of a select_sync* + ref
pair, now. Added respective functions for semaphores, ports, and
threads.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22416 a95241bf-73f2-0310-859d-f6bbb57e9c96
and thread spinlock was reverse in Wait() and Notify(). The thread lock
is now the outer lock -- this way it is still possible to call Notify()
with the thread lock being held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22401 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked the select support:
- The io_context additionally stores a table of lists of select_infos,
which enables it to deselect events of a pending select() when
closing a FD. This prevents a race condition potentially causing a
write to stale memory.
- The opaque selectsync* passed to FSs is now actually a select_info*.
This was necessary, since the FDs deselect() hook (unlike the
select() hook) doesn't take a "ref" argument and deselecting a
single info (e.g. caused by a premature close()) was not possible.
The select() hook's "ref" argument has become superfluous.
- It should now be relatively easy to implement a poll_on_steroids()
that can also wait for objects other than FDs (e.g. semaphores,
ports, threads etc.).
* Set/reset the signal mask in common_select(). This makes pselect()
work as required.
* Reorganized vfs_resize_fd_table().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22391 a95241bf-73f2-0310-859d-f6bbb57e9c96
components - now, we divide the initialization of that service into two parts
which allows this (before, most handlers were gone after boot).
* Added debugger command that dumps the low memory handlers.
* The slab allocator now registers its low memory handler with a higher
priority, so that it'll run before the potentially heavier ones.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22374 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We now have a page writer that takes some pages from the modified queue
and writes it back every few seconds. It can be triggered by the page
scanner to do that more often, though. That mechanism can be greatly
improved once we have our I/O scheduler working.
* Removed vm_page_write_modified_page() again - it was all "eaten up" by
the page writer.
* Reworked vm_page_write_modified_pages() a bit: it now uses
vm_test_map_modification() and vm_clear_map_flags() instead of the
iterating over all areas which wouldn't even work correctly.
The code is much simpler now, too.
* You usually put something to the tail of a queue, and remove the contents
from the head, not vice versa - changed queue implementation to reflect this.
* Additionally, there is now a enqueue_page_to_head() if you actually want the
opposite.
* vm_page_requeue() allows you to move a page in a queue to the head or tail.
* Replaced vm_clear_map_activation() with vm_clear_map_flags() which allows
you to clear other flags than PAGE_ACCESSED.
* The page scanner dumps now some arguments with each run.
* Removed the old disabled pageout_daemon() from NewOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22348 a95241bf-73f2-0310-859d-f6bbb57e9c96
arguments into vm.h.
* This should fix the broken build from earlier - thanks Stefano for the note!
* That also allowed to clean some other includes a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22331 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the private VM types are including vm_types.h now.
* Removed vm_page, vm_area, vm_cache, and vm_address_space typedefs; it's
cleaner this way, and the actual types are only used in C++ files now,
anyway.
* And that caused changes in many files...
* Made commpage.h self-containing.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22329 a95241bf-73f2-0310-859d-f6bbb57e9c96
opaque types for C.
* As a result, I've renamed some more source files to .cpp, and fixed
all warnings caused by that.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22326 a95241bf-73f2-0310-859d-f6bbb57e9c96
introduced a new vm_page_write_modified_page().
* Resolved a TODO: vm_page_write_modified_pages() did not mark a to be
written page busy but unlocked its cache which could let someone else
steal that page in the mean time.
* Moved the logic when to move a page to the active or inactive queue to
a new function move_page_to_active_or_inactive_queue().
* Moved page_state_to_string() to vm_page(); it's now also used by the
"page" and "page_queue" KDL commands.
* Made the output of the "page_queue list" command more useful.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22323 a95241bf-73f2-0310-859d-f6bbb57e9c96
are locked, there is now a vm_page_reserve_pages() call to ensure upfront that
there is a page for me when I need it, and may have locked some caches.
* The vm_soft_fault() routine now makes use of that feature.
* vm_page_allocate_page() now resets the vm_page::usage_count, so that the file
cache does not need to do this in read_chunk_into_cache() and
write_chunk_to_cache().
* In cache_io() however, it need to update the usage_count - and it does that
now. Since non-mapped caches don't have mappings, the page scanner will punish
the cache pages stronger than other pages which is accidently just what we
want.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22319 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the vm_cache/vm_store ref_count duality that besides being a bit ugly
also created the page dameon cache retrieval problem: now, only areas (and
cache consumers) retrieve a reference to the store (and therefore, the vnode).
The page daemon doesn't need to care about this at all anymore, and the pseudo
references of the vm_cache could be removed again.
* Rearranged deletion of vnodes such that its ID can be reused directly after
fs_remove_vnode() has been called.
* vm_page_allocate_page() no longer panics when it runs out of pages, but just
waits for new pages to become available using the new sFreeCondition condition
variable - to make sure this happens in an acceptable time frame, it'll
trigger a run of the low memory handlers.
* Implemented a page_thief() that steals inactive pages from caches and puts
them into the free queue. It runs as a low memory handler.
* The file cache now sets the usage count on the pages it inserts into the
cache (needs some rework though, cache_io() doesn't do it yet).
* Instead of panicking, the kernel will currently dead lock in low memory
situations, since BFS does a bit too much in bfs_release_vnode().
* Some minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22315 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced release_sem() with release_sem_etc() for future addition of the
B_DO_NOT_RESCHEDULE flag.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22308 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed vm_page_allocate_page_run(): it did not take the pageState into account,
and would therefore return uninitialized memory (ie. B_CONTIGUOUS areas would
contain garbage).
Now, it stores if a page is cleared in a new vm_page::is_cleared field.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22306 a95241bf-73f2-0310-859d-f6bbb57e9c96
diagnostic purposes).
* hash_init() adjusts the table size to a prime number, which should
result in a better element distribution, particularly since usually a
power of two is passed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22210 a95241bf-73f2-0310-859d-f6bbb57e9c96
a reference to a by them not yet referenced cache was not correct.
They only incremented the reference count, but a vnode cache reference
includes also a vnode reference. In case of the page daemon this would
cause vnode references to be lost (causing bug #1465).
* The page daemon used an unsafe method to access a yet unreferenced
page cache. There was nothing that prevented the cache from being
deleted while the page daemon tried to get a reference. The
vm_page::cache field is now protected by the page cache table
spinlock, too, which the new function
vm_cache_acquire_page_cache_ref(), used by the page daemon, also
acquires while trying to get the reference.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22208 a95241bf-73f2-0310-859d-f6bbb57e9c96
group ID with the session and let the terminal update them.
* Added an "orphaned" flag to the process_group structure and code to
maintain it.
* Handle the death of a controlling process correctly: The
foreground process group gets a SIGHUP and all newly-orphaned process
groups containing at least one stopped processes are sent
SIGHUP+SIGCONT.
* The tty handles the O_NOCTTY flag correctly, now.
* The tty handles reads/writes from processes from other sessions
correctly, now.
* Handle tcsetpgrp() from background processes correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22187 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Defined flag SIGNAL_FLAG_TEAMS_LOCKED for send_signal_etc(), so it can
be called with the team lock being held.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22186 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocked and no other child status is available.
* Respect SA_NOCLDWAIT and ignored SIGCHLD in waitpid(): Unless a child
status is available immediately, the thread shall block until all
children are gone.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22161 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vm_translation_map is now correctly held in all of the vm_ mapping
functions.
* Removed the old vm_daemons.c file - there is now a new vm_daemons.cpp
which contains the beginnings of our new page daemon.
So far, it's pretty static and not much tested. What it currently does
is to rescan all pages in the system with a two-handed clock algorithm
and push pages into the modified and inactive lists.
* These inactive pages aren't really stolen yet, even though their mappings
are removed (ie. their next access will cause a page fault). This should
slow down Haiku a bit more, great, huh? :-)
* The page daemon currently only runs on low memory situations, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22156 a95241bf-73f2-0310-859d-f6bbb57e9c96
DEBUG_CACHE_LIST) that prints an unspectacular list of pointers to all
existing caches. Feel free to extend.
* Enhanced MultiAddressSpaceLocker:
- It supports choosing between read and write lock per address space,
now.
- Added AddAreaCacheAndLock(), which adds the address spaces of all
areas that are attached to a given area's cache, locks them, and
locks the cache. It makes sure that the area list didn't change in
the meantime and optionally also that all areas have their
no_cache_change flags cleared.
* Changed vm_copy_on_write_area() to take a cache instead of an area,
requiring it to be locked and all address spaces of affected areas to
be read-locked, plus all areas' no_cache_change flags to be cleared.
Callers simply use MultiAddressSpaceLocker:: AddAreaCacheAndLock() to
do that. This resolves an open TODO, that the areas' base, size, and
protection fields were accessed without their address spaces being
locked.
* vm_copy_area() does now always insert a cache for the target area. Not
doing that would cause source and target area being attached to
the same cache in case the target protection was read-only. This
would make them behave like cloned areas, which would lead to trouble
when one of the areas would be changed to writable later.
* Fixed the !writable -> writable case in vm_set_area_protection(). It
would simply change the protection of all mapped pages for this area,
including ones from lower caches, thus causing later writes to the
area to be seen by areas that shouldn't see them. This fixes a problem
with software breakpoints in gdb. They could cause other programs to
be dropped into the debugger.
* resize_area() uses MultiAddressSpaceLocker::AddAreaCacheAndLock() now,
too, and could be compacted quite a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22152 a95241bf-73f2-0310-859d-f6bbb57e9c96
Condition variables would never be interrupted.
* ConditionVariableEntry::Add() did not correctly insert the entry into
the per-thread list of entries (the next link of the previous entry
was not adjusted), which could leave the entry unnotified when the
previous entry was notified, thus leaving it in the respective
condition variable's list after the end of its life time. This should
fix a crashing bug I rarely encountered.
* Added debug checks in the PrivateConditionVariableEntry
constructor/destructor that should have helped me to find
forementioned bug hours earlier, had I been bright enough to realize
that I didn't include <debug.h> and those KDEBUG guarded checks were
never executed. :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22151 a95241bf-73f2-0310-859d-f6bbb57e9c96
Can be enabled by defining KERNEL_BREAKPOINTS in arch/user_debugger.h
and will provide the arch_{set,clear}_kernel_{break,watch}point()
function. Hitting a break-/watchpoint will throw the thread into KDL.
* Finally added a comment, what's the point of
i386_reinit_user_debug_after_context_switch(), since I wonder every
time I see it. Should be optimized aways soon.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22150 a95241bf-73f2-0310-859d-f6bbb57e9c96
is used instead of death_entry for team::dead_children.
* Added team::{stopped,continued}_children, which, analoguously to
dead_children, are used to track the state of stopped/continued
children.
* A team does have a job_control_entry, which is allocated at team
creation time. It will be inserted into the parent's
{stopped,continued}_children lists as the team's main thread is
stopped/continued and removed when waitpid() retrieves the child
state. When the team dies the entry is detached from the team and goes
into the parent's dead_children list.
* Removed the wait_for_any field from team_dead_children. It was solely
used to avoid deletion of the contained entries in certain situations.
wait_for_child() (the waitpid() backend) always deletes an entry now,
regardless of whether other threads are waiting; that's in
accordance with the waidpid() specification. wait_for_thread() removes
the entry only, if the caller is the parent of the respective team.
* Introduced team_set_job_control_state() which performes the job
control entry transitions between the respective lists and wakes up
threads waiting in wait_for_child(). It is invoked on team death and
when the team's main thread receives job control signals.
* Reorganized wait_for_child(). It handles WCONTINUED and WUNTRACED now,
too. Removed a block that interpreted the supplied ID as thread ID.
* Added missing parts in waitpid().
Job control starts to work, though it seems to have some glitches.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22088 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added class InterruptsSpinLocker, which disables interrupts and
acquires a spinlock all in one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22086 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable. Due to C code including the header I had to turn it from and
aggregated member to a pointer. I'm very close to starting to convert
all remaining .c to .cpp files. :-/
* Got rid of the "waiters" field. It was only written, never read.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22084 a95241bf-73f2-0310-859d-f6bbb57e9c96
exists and thread was notified), B_ENTRY_NOT_FOUND (condition variable
not found or Unpublish()ed while waiting), or B_INTERRUPTED
(interrupted by a signal).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22083 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed left-over commented C implementation.
* It is now possible for a thread to wait for more than one condition
variable at a time.
* Made waiting for condition variables optionally interruptable.
* Renamed Notify() method to NotifyAll() and added a NotifyOne(), so
that it is now possible to wake up only one of the waiting threads.
Pretty much untested at the moment.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22081 a95241bf-73f2-0310-859d-f6bbb57e9c96
content name are supported.
* Added file_system_module_info::flags (analogously to
partition_module_info::flags) which indicate which disk device
features the FS supports.
* Replaced the
file_system_module_info/partition_module_info::supports_*()
hooks by a get_supported_operations() hook and for partitioning
systems additionally a get_supported_child_operations() hook.
* Updated file and partitioning systems accordingly.
* Updated fs_shell accordingly.
* Updated the DDM accordingly. The syscall interface remains unchanged,
though.
* _user_supports_initializing_partition() also checks whether the parent
partitioning system is content now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22043 a95241bf-73f2-0310-859d-f6bbb57e9c96
* On exec() the new function thread_reset_for_exec() is called which clears the signals
and cancels an eventually set alarm. Both things weren't done before...
* Some minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21989 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Pulled the actual tree code into a non-templatized class AVLTree to
reduce the amount of code generated each time the template is
instantiated.
* Changed the iterator interface to Java-style.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21892 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed a few instances where the page state was set busy directly after
allocating it. This is a no-op, since a page is always busy after
allocation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21875 a95241bf-73f2-0310-859d-f6bbb57e9c96
cheap means to block threads until notified explicitely.
threads
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21874 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupts) and SpinLocker (acquires/releases spinlocks).
* Adjusted Jamfiles of components that used <util/AutoLock.h> but didn't
add all header directories required now (<int.h> was added).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21873 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the ref_count from vm_areas. You now always need to have the address
space locked (read or write, depending on what you do) when dealing with
areas.
* Added helper classes for locking the address space: AddressSpace{Read|Write}Locker,
and MultiAddressSpaceLocker which can lock several spaces at once and makes
sure no dead locks can happen.
* resize_area() is now using the MultiAddressSpaceLocker instead of no locking
at all; ie. it should now be safely to use.
* Disabled transfer_area() for now; it will be changed to work like an atomic
clone_area()/delete_area(), that is, it will hand out a new ID for the
transfered area.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21848 a95241bf-73f2-0310-859d-f6bbb57e9c96
additional parameters that are fed into a dprintf() before panic() is
invoked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21838 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Simplified the notification framework: removed the updater stuff completely;
it was only there to account for some peculiarities of the node monitor which
we now solved differently.
* NotificationListener no longer includes a doubly linked list link for convenience;
it might want to listen to more than just one service.
* NotificationService cannot have an abstract destructor.
* Changed the _user_stop_watching() syscall to mirror the Be API; ie. it's no
longer possible to just remove some flags separately, just to stop listening
completely.
* Adapted the node monitor implementation to live in the NodeMonitorService class
that uses the new notification framework.
* Removed the public kernel node monitor API - it wasn't useful that way since you
couldn't do a lot with the KMessage in the kernel without using a private API.
Now you will have to use the (private) notification manager to use the node monitor
from inside the kernel. At a later point, we might introduce a public API for that,
too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21780 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a Current() method to the same class that returns the current element again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21779 a95241bf-73f2-0310-859d-f6bbb57e9c96
Will be used for node monitoring and other stuff, too (like the Registrar or the
VM low memory handler).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21768 a95241bf-73f2-0310-859d-f6bbb57e9c96
therefore, we could remove the ugly defines from KMessage again, and compile it
with KMESSAGE_CONTAINER_ONLY.
* Added KMessage::SetDeliveryInfo() to be able to send messages with a correct
header.
* Fixed a bug in KMessage::SendTo() that would not send the senderTeam when passing
a negative value for the parameter, but override it when passing in a valid
value.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21740 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved method documentation from headers to source files.
* Fixed small problems (memory leaks, unsafe string duplication,...).
* Added TODOs where I spotted problems.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21721 a95241bf-73f2-0310-859d-f6bbb57e9c96
for _kern_load_image().
* Added KMessage to the runtime_loader (a bit hacky, though) - it will use
it to deliver the above mentioned functionality.
* load_dependencies() did return the wrong status code in case a library
was missing; now it returns B_MISSING_LIBRARY.
* load_dependencies() will now try to load all dependencies when a report
message is requested; therefore, all missing libraries are listed.
* Renamed uspace_program_args to user_space_program_args.
* The kernel filled in various members of the user_space_program_args structure
unsafely, ie. was not using user_memcpy().
* Renamed some local variables in team.c to better fit our style guide (ie.
uargs to userArgs).
* Changed Tracker to use the new _kern_load_image() variant on Haiku to retrieve
and report all missing libraries. This fixes bug #1324.
* Adapted kernel_cpp.cpp to the runtime loader as well; the latter will now
compile with _LOADER_MODE defined.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21715 a95241bf-73f2-0310-859d-f6bbb57e9c96
* More conditional debug code (wrt page transitions between caches).
* Replaced debugger command cache_chain by a nicer cache_tree.
* While handling a soft fault: When we temporarily unlock a cache, it
can theoretically become busy. One such occurrence is now handled
properly, two more panic() ATM, though should be fixed.
* When merging caches, we do now always replace a dummy page in the
upper cache, not only when the concurrent page fault is a read fault.
This prevents a page from the lower (to be discarded) cache from still
remaining mapped (causing a panic).
* When merging caches and replacing a dummy page, we were trying to
remove the dummy page from the wrong cache (causing a panic).
The Haiku kernel seems now to run shockingly stable. ATM, we have more
than two hours uptime of a system booted and running over network. We
didn't manage to get it down by fully building Pe, downloading, unzipping,
and playing with various stuff. Someone should finally fix all those app
server drawing bugs, though (hint, hint! ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21672 a95241bf-73f2-0310-859d-f6bbb57e9c96
stack hungry and would previously hit the stack limit and thus cause a
double fault. Hopefully we'll be able to reduce the stack foot print at
some time.
PXE boot does now fully work.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21663 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Images preloaded by the boot loader had to be modules to be of any use
to the kernel. Extended the mechanism so that any images not accepted
by the module code would later be tried to be added as drivers by the
devfs. This is a little hacky ATM, since the devfs manages the drivers
using a hash map keyed by the drivers inode ID, which those drivers
obviously don't have.
* The devfs emulates read_pages() using read(), if the device driver
doesn't implement the former (all old-style drivers), thus making it
possible to BFS, which uses the file cache which in turn requires
read_pages(), on the device. write_pages() emulation is still missing.
* Replaced the kernel_args::boot_disk structure by a KMessage, which can
more flexibly be extended and deals more gracefully with
arbitrarily-size data. The disk_identifier structure still exists,
though. It is added as message field in cases where needed (non net
boot). Moved the boot_drive_number field of the bios_ia32 platform
specific args into the message.
* Made the stage 1 PXE boot loader superfluous. Moved the relevant
initialization code into the stage 2 loader, which can now be loaded
directly via PXE.
* The PXE boot loader does now download a boot tgz archive via TFTP. It
does no longer use the RemoteDisk protocol (it could actually be
removed from the boot loader). It also parses the DHCP options in the
DHCPACK packet provided by PXE and extracts the root path to be
mounted by the kernel.
* Reorganized the boot volume search in the kernel (vfs_boot.cpp) and
added support for network boot. In this case the net stack is
initialized and the network interface the boot loader used is brought
up and configured. Since NBD and RemoteDisk are our only options for
net boot (and those aren't really configurable dynamically) ATM, the
the boot device is found automatically by the disk device manager.
Booting via PXE does work to some degree now. The most grievous problem
is that loading certain drivers or kernel modules (or related activity)
causes a reboot (likely a triple fault, though one wonders where our
double fault handler is on vacation). Namely the keyboard and mouse input
server add-ons need to be deactivated as well as the media server.
A smaller problem is the net server, which apparently tries to
(re-)configure the network interface we're using to boot, which
obviously doesn't work out that well. So, if all this stuff is disabled
Haiku does fully boot, when using the RemoteDisk protocol (not being
able to use keyboard or mouse doesn't make this a particular fascinating
experience, though ;-)). I had no luck with NBD -- it seemed to have
protocol problems with the servers I tried.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21611 a95241bf-73f2-0310-859d-f6bbb57e9c96
with the same size as the class is defined.
* The SetTo() methods do now accept an unspecified (negative) bufferSize
in case of being told to initialize from the given buffer.
* Added handy Get*() methods returning a field element value or a
supplied default value, if the field element doesn't exist.
* Added also handy Set*() methods setting the value of first element of
a field, i.e. adding it, if it didn't exist before, otherwise
replacing the old value. Only for fixed size types.
* Moved _FindType() inline template method into the header.
* Made the source file fit for use in the boot loader. If the macro
KMESSAGE_CONTAINER_ONLY is defined, the message sending/receiving part
is omitted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21605 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed r5_message.cpp and dano_message.cpp accordingly
* Also moved out KMessage handling from Message.cpp to MessageAdapter.cpp
* Fixed some minor style issues in Message.cpp
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21514 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_copy_on_write_area() now does no longer overwrite the ref_count, but keeps
it's reference to the cache until it has unlocked it.
* It now also locks its reference from the start, preventing any other thread
to interfere.
* vm_cache_remove_consumer() now detects if it has to remove a foreign busy
page itself in order to preserve a mapped page.
* vm_soft_fault() now keeps a reference to the cache that owns the page to be
mapped until it has actually mapped it.
* vm_unmap_pages() removed the mappings of all pages of the area instead of only
those that are within the requested range.
* Kept (disabled) debug output for convenience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21482 a95241bf-73f2-0310-859d-f6bbb57e9c96
Disabled by default, but all kernel devs are *highly* recommended to turn them on for your builds and see if it trips anything, and then fix it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21477 a95241bf-73f2-0310-859d-f6bbb57e9c96
libroot). It's available in the kernel through the private
get_haiku_revision() and added to the kernel syslog output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21173 a95241bf-73f2-0310-859d-f6bbb57e9c96
* PowerStatus is now using this API when compiled for Haiku.
* Note, I'm not sure why yet, but running PowerStatus in the background
crashes at least my laptop after some time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21154 a95241bf-73f2-0310-859d-f6bbb57e9c96
- call the reclaimer callback when low on memory.
- use the depot when on multi-cpu setups (for scalability).
- fixed the amount of memory spent on slabs for very large objects.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20889 a95241bf-73f2-0310-859d-f6bbb57e9c96
in.
* New debugger command "find_page", which searches all page queues to
find out, which one a page is actually in.
* Solved nasty race condition between the page scrubber and
vm_page_allocate_page_run(): The page scrubber didn't mark the pages
it was processing busy, so that vm_page_allocate_page_run() could claim
them in the meantime. They would end up in the clear pages queue,
although being assigned to a cache at the same time. This should
finally solve bug #1056.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20474 a95241bf-73f2-0310-859d-f6bbb57e9c96
into its own shared/AutoLocker.h. It can be used by userland code too.
* Removed headers/private/shared/ObjectLocker.h and replaced all uses of
BObjectLocker by AutoLocker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20432 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a comment to vm_remove_all_page_mappings() that shows that we need to
change the mapping spinlock into a mutex.
* Pointed out some potential problems in the code.
* Added vm_page_at_index(), vm_clear_map_activation(), and vm_test_map_activation()
in preparation of the page scanner rewrite.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20407 a95241bf-73f2-0310-859d-f6bbb57e9c96
possibility to initialize the AutoLocker without locking the object even
if it is unlocked yet. Especially in loops Lock()/Unlock() come handy
when an otherwise constantly hold lock needs to be unlocked for a short
time.
I suppose we should move the kernel utils AutoLocker implementation
to headers/private/shared, and drop the less powerful ObjectLocker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20405 a95241bf-73f2-0310-859d-f6bbb57e9c96
{set,clear}_debugger_{break,watch}point(), allowing to set/clear break
and watchpoints for the calling team. When a break/watchpoint is hit,
the team enters the debugger. Handy in situations when the program in
question can't really be started in a debugger (or it would be
complicated to do so). The functions work only as long as no debugger is
installed for the team.
We clear the arch specific team and thread debug infos now, when a new
debugger is installed, thus clearing break- and watchpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20396 a95241bf-73f2-0310-859d-f6bbb57e9c96
for the kernel. Added missing includes in userland code that uses the
header.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20366 a95241bf-73f2-0310-859d-f6bbb57e9c96
suggested by Ingo; before it would just fill the physical pages with NULL pointers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20364 a95241bf-73f2-0310-859d-f6bbb57e9c96
that points to both, the page and the area the page is in. This will allow a page
scanner to steal unused pages when necessary.
* The locking is currently done with a spinlock which we might want to have another
look at one day.
* dump_page() and dump_area_struct() now dump the page mappings as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20356 a95241bf-73f2-0310-859d-f6bbb57e9c96
add-ons accordingly and removed the syscall.
* Removed send_notification().
* Reimplemented notify_listener(). It used the unimplemented
send_notification(). Now it has a chance to work. Note that
notify_listener() is obsolete. I would already have removed it, if
there weren't lots of FS implementations still using it (Hint!).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20329 a95241bf-73f2-0310-859d-f6bbb57e9c96
to B_FULL_LOCK.
* vm_clone_area() now respects the source area's wiring and inherits it. This
should fix bug #1055.
* vm_cache::type is now duplicated in vm_area::cache_type - this allows looking
it up without having to lock a vm_cache_ref; this also solves a locking bug
in vm_unmap_pages() in this regard.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20281 a95241bf-73f2-0310-859d-f6bbb57e9c96
Basically, there was a pretty subtle race between the cpus in main where if the main cpu released the AP cpus and then before the AP cpus had a chance to run the boot cpu started creating the main thread (which causes smp ici messages to be created) the system would livelock, where the boot cpu waited forever for the AP cpu to acknowledge the ICI (for a TLB flush when creating the kernel stack).
Added smp_cpu_rendezvous(), used to synchronize all the cpus to a particular point, and used it a few times in main().
While i was at it i fixed another race that'll probably never happen, but what the hey. Make sure the kernel args are copied into kernel space by the main cpu before letting any other ones use it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20269 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_area and vm_page now have a new field "mappings" where they will store lists
of vm_page_mapping structures. vm_page::ref_count is gone, as it's no longer
needed (it was never updated correctly, anyway).
* vm_caches now have a type field, ie. CACHE_TYPE_RAM for anonymous areas - this
makes the stores a bit less independent, but is quite handy in several places.
* Added new vm_map_page() and vm_unmap_pages() functions to be used whenever you
map in or unmap pages into/from an area. They don't do much more than handling
vm_page::wired_count correctly right now, though (ie. B_LAZY_LOCK is now working
as expected as well).
* Moved the device fault handler to vm_map_physical_memory(); it was not really
used as a fault handler, anyway.
* Didn't notice Ingo's changes to the I/O space region broke lock_memory(). It
now checks the type of the area that contains the memory, and doesn't lock
anymore if not needed which solves the problem in a platform independent way.
* Implemented lock_memory() and unlock_memory() for real: they now change the
vm_page::wired_count member to identify pages that shouldn't be paged out.
* vm_area_for() now uses vm_area_lookup() internally.
* Fixed various potential overflow conditions with areas that reach 0xffffffff.
* Creating anonymous areas with B_FULL_LOCK no longer causes vm_soft_fault()
to be called, instead, the pages are allocated and mapped (via vm_map_page())
directly.
* Removed the _vm_ prefix for create_area_struct() and create_reserved_area_struct().
* Fixed a bug in vm_page_write_modified() that would not have enqueued pages that
failed to be written to the modified queue again when needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20251 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed them, made everything static besides vm_allocate_early() (previous
vm_alloc_from_kernel_args()) which now allows you to specify a different
virtual than physical size, and therefore makes vm_alloc_virtual_from_kernel_args()
superfluous (which isn't exported anymore, and is now called allocate_early_virtual()).
* Enabled printing a stack trace on serial output on team crash - it doesn't hurt
for now, anyway.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20244 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
* recursive_lock_unlock() now returns a void to mirror it's counterpart better;
use recursive_lock_get_recursion() if you're interested in the lock depth.
* switch_sem(), and release_sem() now don't do anything anymore in kernel startup
mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20099 a95241bf-73f2-0310-859d-f6bbb57e9c96
for one quantum wasn't really a good idea, as this could get quite expensive for the thread
(depending on the system load, it might have taken a long time until the thread was scheduled
again, no matter what priority it was).
Also, calling thread_yield() in a loop would have taken 100% CPU time.
Now, we sort the thread into the queue as with any other thread, but we'll ignore it once.
This now guarantees an actual context switch, as well as a much fairer rescheduling policy
for threads calling that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20077 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced the _kern_null syscall with _kern_is_computer_on.
is_computer_on_fire is a bit harder, since it returns a float from kernelland, which
at the moment isn't supported in haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20069 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we now always flush the TLBs after having unmapped some pages.
* vm_soft_fault() could traverse to a source cache while it was being collapsed
by vm_cache_remove_consumer() - this is now no longer possible as the latter
marks the cache as busy when doing so, and the former now tests this flag and
locks the cache (via the new fault_acquire_locked_source() function).
* if fault_acquire_locked_source() fails with B_BUSY, the current cache is locked
again, and tested again for the page - as it might have been moved upwards to it
with the destruction of its former source.
* The cache delivering the page for vm_soft_fault() is now locked until the end;
it can no longer go away before having actually mapped the page into the area.
* This also fixes the issue where pages would get lost as vm_soft_fault() put the
page in the active list, no matter if its cache still existed.
* Also, we now keep a reference of to a cache in case a dummy page is inserted; this
makes again sure that it doesn't go away during the execution of vm_soft_fault()
(which could even add this page to the free list...).
* divided vm_soft_fault() into several smaller functions which should make it much
more readable.
* Added a "cache_chain" KDL command that dumps the whole chain until the bottom
when giving a pointer to a vm_cache as parameter.
* now usually call vm_cache_acquire_ref() before map_backing_store(), even though
it shouldn't be really needed (I added it for debugging purposes).
* Some minor cleanup.
* NOTE: a major problem still persists: when removing a vm_cache, it's possible
that some of its pages are still mapped, and there is currently no mechanism
to get rid of these mappings! I've added TODO comments into vm_cache.c where
appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20028 a95241bf-73f2-0310-859d-f6bbb57e9c96
process group. This fixes bug #996.
* As a result, the process group stuff and wait_for_child() got much simpler;
get_death_entry() and update_wait_for_any() could go away completely.
* If a team goes away, all of its children are now "reparented" to the kernel team,
instead of the team's parent - this follows common implementations (and POSIX if
I understand it correctly), but not BeOS anymore. The OpenGroup Base says this
about this topic: "If a parent process terminates without waiting for all of its
child processes to terminate, the remaining child processes shall be assigned a
new parent process ID corresponding to an implementation-defined system process."
* We wait too long in wait_test_4 which at least puts us on par with Linux; see
comment in _user_setpgid().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20010 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
