* We pack the first 8 bits into a union for the raw
edid since alignment matters.
* Handing the raw_edid is a bit ugly, so in the edid struct
we drop the input_type from the union since packing doesn't
matter as much.
Change-Id: I32dbfe9484f9eb83cf491a44d30a32ca36d65b7b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4775
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
In most cases we don't need to use the complete display_mode struct and
we just need the timings. This will avoid future confusion between the
virtual width/height and the actual display timings, if we implement
scrolling someday.
Change-Id: I6c4430b84130b956a47ea0a01afb0843f5a34fd2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4665
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This cuts out almost 40,000 lines of these headers. (I did something similar
in the atheroswifi AR93xx/94xx driver when importing it from FreeBSD,
which had a lot more than 40,000 lines.)
These will be needed to implement custom modes in the VESA driver.
Change-Id: I9b52de691baa14e1f1a3ccce500ced9bb040b113
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4622
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* PCI ID's from Linux
* There are a bunch of NAVI quirks around 3d rendering pipelines
but not many around modesetting (which is the only thing we care
about)
Change-Id: If63e31fe1d37d9d95f2a71c222a4cda7a2914a5e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4467
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Change-Id: Ifbd82ef7bfc2c39b2aeb5c25be177421cd22d246
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2920
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
- Cleanup HEAD_MODE constants. These should be completely removed, now
that we have a proper notion of pipes and displays. But the DPMS code
still uses them, for now.
- Fix the ie_pipe command where width and height were swapped and
missing a +1 to show the actual videomode values
We need to assign PLLs to pipes and transcoders. The assignments on
previous generations were fixed, but now it's up to us to set it up.
Do the simplest thing for now: assign PLL1 to pipe A and PLL2 to pipe B.
- 7xx (1st gen) has no driver in Haiku or is handled by the intel_810 driver
- PowerVR has no driver in Haiku
So there is no point in having those in the intel_extreme driver.
While I'm at it, fix the video timing/resolution constraints for
sanitize_video_mode.
- The name for the registers were swapped
- The width and height were also swapped in one of them
- Remove some old #if 0 code that touched these registers but has been
disabled for a while.
LVDS panels must really be driven at their native resolution, otherwise
they will simply not work. This means we should basically never touch
the video timings on that side. We need to only set the source size in
the pipe configuration, and let the panel fitter figure out the scaling.
On my G45 laptop, this allows me to use non-native resolutions on the
laptop display. This also means when booting with a VGA display
connected, I do get a valid display on the internal panel (using the VGA
resolution). VGA still gets "out of range", so we're still not setting
up something there.
If I switch to VGA display in the BIOS, I get a working picture there
and garbage on the internal display, which is progress (before I would
get a black screen on the internal display)
Fixes#12723.
- Remove duplicate and otherwise unused lendian_bitfield.h
- Adjust listusb jamfile to use lendian_bitfield.h
- Fix various typos in usb_video.h and restore some fields to make
listusb happy
This reverts commit 4f059c1fc5.
From discussion on the mailing list, it seems I was correct the first time
and Broadwell is Gen8. The confusion comes from the SER5/SOC distinction,
which is not in the Linux driver, and I still don't know which one it really
belongs in.
* GCC7's static analysis found this one and it still
took #gcc and me a while to spot. Nice work gcc7!
* Should help DisplayPort training issues :-)
Change-Id: I9b47f13c95e622a2c08ff329ec9c3fc7e3db493d
At present, does not work (it fails to properly set up interrupts,
resulting in thousands of unhandled ones which all but grinds the system
to a halt) but this at least is some progress.
