copies of it with a call to that.
* Make the variable names more readable and spacing cleanup.
No functional change intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41670 a95241bf-73f2-0310-859d-f6bbb57e9c96
timer code has such definitions too, but they're not quite as verbose. Will
eventually make the latter use these too.
* Prepare for possibly using other PIT channels for the calibration. Right now
everything's the same still.
* Add disabled print of the resulting factors.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41669 a95241bf-73f2-0310-859d-f6bbb57e9c96
active config and update the info for the remaining shared link device
entries. Seen on KVM for the (PCI) ACPI interrupt, but happens where there is
no _SRS method for a device (as this one is optional). I find that a bit
strange however as in such a case no _PRS (possible resources) should be
present either, especially not one advertising a config different from the
current one.
* Print the routing table later, after enabling irq routing, so that possible
changes due to such a fallback are included.
* Fix a typo.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41652 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't otherwise exposed via the safe mode menus. The option can be
found under the debug options menu, where additional settings can be
added one at a time with the same syntax used in kernel settings files
(i.e. disable_acpi on).
Scrolling of the input buffer is not yet supported (will implement that
soon), so currently the input is clamped to the size of one line. This
shouldn't be a problem for our current set of options though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41577 a95241bf-73f2-0310-859d-f6bbb57e9c96
unlocks the cache, we have to look up the page again, since someone else could
have removed it in the meantime. Possibly fixes#7514.
+r1alpha3
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41564 a95241bf-73f2-0310-859d-f6bbb57e9c96
pin configuration as the configuration only happens after preparing the
configuration where we already need the NMI mask.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41536 a95241bf-73f2-0310-859d-f6bbb57e9c96
the macros. This makes things more readable and also fixes the few remaining
80 char limit violations. No functional change intended.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41533 a95241bf-73f2-0310-859d-f6bbb57e9c96
specify the delivery mode.
* Use that function from ioapic_configure_io_interrupt() and use it when
configuring NMI sources to actually set the entries to NMI.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41531 a95241bf-73f2-0310-859d-f6bbb57e9c96
unavailable for routing so that we don't end up configuring anything on them.
I haven't seen these in actual use though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41530 a95241bf-73f2-0310-859d-f6bbb57e9c96
we use a 64 bit level triggered mask. In practice these don't exist as far as I
know. If we encounter them at a later stage we need to revisit the mask.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41529 a95241bf-73f2-0310-859d-f6bbb57e9c96
at the override entry to trigger the overriden vector so that we don't need
to configure any additional redirections.
* Also configures the polarity and trigger modes found in the override entry.
* When disabling the legacy PIC, retrieve the enabled interrupts and re-enable
then in the IO-APIC. This will for example make the ACPI SCI work that is
installed prior to switching interrupt models. Through the transparent support
for interrupt source overrides it'll also automatically relay from the old to
the new vector.
This should make ACPI interrupts work and should support relocating the ISA PIT
from irq 0 to a different global system interrupt (usually 2) so that it can
still work when IO-APICs are in use.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41528 a95241bf-73f2-0310-859d-f6bbb57e9c96
all reports so far have been positive. We fall back to legacy mode in the cases
where we can't figure out the correct routing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41527 a95241bf-73f2-0310-859d-f6bbb57e9c96
* move system_revision.h to headers/private/libroot
* unify libroot's get_system_revision() (the one I introduced recently) with kernel's
get_haiku_revision(), the function is now called get_haiku_revision() in the kernel
and __get_haiku_revision() in libroot
* system_revision.c is now being built as part of libroot and as part of the kernel
* adjusted all callers of get_system_revision() accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41516 a95241bf-73f2-0310-859d-f6bbb57e9c96
of bufferSize, corrupting entries when multiple items within the same menu were
checked.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41505 a95241bf-73f2-0310-859d-f6bbb57e9c96
all inter-CPU messaging. The previously described timekeeping is just an extra
function of local APICs. Before, if you'd select "disable local APIC" it would
still blindly write to invalid memory (targetting the non-mapped local APIC) and
then just hang waiting for the other CPUs (that were obviously not responding
to the init sequence that wasn't programmed).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41504 a95241bf-73f2-0310-859d-f6bbb57e9c96
configuring SMP via MP tables. We don't support that method anyhow, but it
should still report correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41503 a95241bf-73f2-0310-859d-f6bbb57e9c96
to the kernel args in a single go. Otherwise we wind up with more link list
entries than expected, which in turn resulted in settings not quite being
parsed properly upon entering the kernel, which meant that if options were
chosen in both the debug and safe mode menus, only the debug ones were
applied. This might also have resulted in the kernel settings not being
loaded correctly in such an instance.
Should fix various issues people have had with safe mode settings not being
applied properly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41500 a95241bf-73f2-0310-859d-f6bbb57e9c96
* add private function get_system_revision() for accessing the
revision string
* adjust uname to use get_system_revision
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41479 a95241bf-73f2-0310-859d-f6bbb57e9c96
at all and, since there can be multiple IO-APICs, we need to do the
enumeration again in the kernel anyway. Also only set ioapic_phys the first
time we encounter an IO-APIC object as it looks cleaner when we arrive at the
first IO-APIC default address.
* Therefore we don't have to worry about already mapped IO-APICs when
enumerating them in the kernel.
* Also remove the mapping function that is now not used anymore.
* We still use the ioapic_phys field of the kernel args to determine whether
there is an IO-APIC at all to avoid needlessly doing the enumeration again.
This fixes multi IO-APIC configurations, because before we would indeed map
the last IO-APIC listed in the MADT, but then in the kernel assumed we mapped
the first one. We'd end up with mapping the last listed IO-APIC twice and the
first IO-APIC never, always programming the last one when we actually targetted
the first one.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41476 a95241bf-73f2-0310-859d-f6bbb57e9c96
written first/last depending on the operation to avoid modifying entries that
are still unmasked or unmasking entries that aren't set up yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41457 a95241bf-73f2-0310-859d-f6bbb57e9c96
have unexpected side effects once we shift them more than 30 bits.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41452 a95241bf-73f2-0310-859d-f6bbb57e9c96
informational only, but most of these entries actually need to be handled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41450 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Actually program the IO-APIC ID when configuring the IO-APIC.
* Moved some debug output around.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41447 a95241bf-73f2-0310-859d-f6bbb57e9c96
mark the ISA interrupts as unusable and then use ioapic_is_interrupt_available
to determine if that vector is possibly taken by an IO-APIC. If IO-APICs are
not used, this will simply always return false, leaving all vectors free for
MSI use.
* The msi_init() now has to be done after a potential IO-APIC init, so it is now
done after ioapic_init() instead of inside apic_init().
* Add apic_disable_local_ints() to clear the local ints on the local APIC once
we are in APIC mode (i.e. the IO-APIC is set up and we don't need the external
routing anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41445 a95241bf-73f2-0310-859d-f6bbb57e9c96
multiple IO-APICs every IO-APIC was initialized to the standard mapping before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41434 a95241bf-73f2-0310-859d-f6bbb57e9c96
we got. If the routing is possible with the limited IO-APICs everythings good,
if not we will simply fail at the routing preparation stage where we can still
fall back gracefully. This makes things a bit more error resilient.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41432 a95241bf-73f2-0310-859d-f6bbb57e9c96
number. This accounts for possible gaps in the IO-APIC GSI mappings. Since most
of the time there will be only a single IO-APIC the extra overhead is relatively
small.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41431 a95241bf-73f2-0310-859d-f6bbb57e9c96
the same for the first IO-APIC in the bootloader (also using the MADT), but
here we can use the ACPI module. The enumerated IO-APICs are added to the list
and should be usable from there on. For lack of hardware I wasn't able to really
test that though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41430 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some TODOs regarding register write order that might have bad side
effects.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41428 a95241bf-73f2-0310-859d-f6bbb57e9c96
functional change intended.
* Use an appropriately sized sLevelTriggeredInterrupts for each controller type.
This also fixes an out of bound access for IO-APICs with more than 32 entries
and also returns the right mode in such cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41426 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the length of the sHaikuRevision character array symbol needs to be set explicitly,
as using either _SYS_NAMELEN or sizeof(utsname::version) will only return the values
for the host, which may not match ours, thus potentially causing problems when using
sHaikuRevision
* add headers/private/system_revision.h which defines SYSTEM_REVISION_LENGTH to 128
* adjust definitions of sHaikuRevision in libroot and kernel accordingly
utsname::version is shorter than SYSTEM_REVISION_LENGTH, but that doesn't cause any harm
until we have indeed switched to a DVCS (in which case longer revision strings will be
cut off by 'uname').
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41421 a95241bf-73f2-0310-859d-f6bbb57e9c96
already. This allows to detect invalid settings before starting to enable
IRQ routing and therefore allows to gracefully fall back to PIC mode on error.
* Actually read the number of IO-APIC entries before using that number in
routing preparation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41416 a95241bf-73f2-0310-859d-f6bbb57e9c96
gracefully in such cases (resulting in the IO-APIC not being used).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41415 a95241bf-73f2-0310-859d-f6bbb57e9c96
vectors at all. It'd also not work for multi IO-APIC setups which we don't
support yet (but are relatively rare anyway).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41414 a95241bf-73f2-0310-859d-f6bbb57e9c96
hardwired GSIs and updated on configuring the link devices, is used for that.
This doesn't guarantee optimal results as some link devices may not be
configurable to some IRQs and we might fill up their slots this way. Most of
the time this should be good enough though.
* Take the BIOS assigned IRQ white list into account when assigning IRQs in the
ISA range and avoid assigning to non white listed IRQs. Quite probably it'd be
ok to use all of the IRQs present in the possible IRQ list, but let's play it
safe...
* Also white listed are the IRQs that were set on the link device before
reconfiguration.
* Some cleanup, use references instead of pointers where applicable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41401 a95241bf-73f2-0310-859d-f6bbb57e9c96
configuration that doesn't require any link device changes and will only
prepare for updating the pci_info. Enabling then does the link device setup
and updates the pci_info with the new IRQ values.
* Configuring link devices now takes into account that multiple devices may
share a single link device, meaning that the sharing PCI devices can't be
configured independently.
We still only blindly configure the first possible IRQ on the link devices, but
now we actually have all the information to change that. Working on that next.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41400 a95241bf-73f2-0310-859d-f6bbb57e9c96
independently. Matching will happen first to enumerate and match all devices.
Updating will happen after configuring all link devices, so once we know the
final GSI of all entries. The info about matching functions is kept in a
bitmask in the table entry.
* Move routing table entry handling out of the loop into it's own function to
faciliate early returns.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41399 a95241bf-73f2-0310-859d-f6bbb57e9c96
Those can be used to white list PCI IRQs in ISA space (<= 15) as those are
basically guaranteed not to overlap with ISA devices. Those white listed entries
can then be used if we only have a 16 pin IO-APIC or if there are only legacy
IRQ resources available for configuration (i.e. ones with bitmasks of 16 bits,
limiting their range to IRQs 0-15).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41397 a95241bf-73f2-0310-859d-f6bbb57e9c96
using the already parsed pci_info data from the PCI module. This removes the
need to iterate over all of the pci_infos for each routing table entries which
makes this an order of magnitude less expensive. Heavily inspired by the
corresponding FreeBSD code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41395 a95241bf-73f2-0310-859d-f6bbb57e9c96
duplicating the structs on our side. IRQ assignment didn't work with extended
IRQ resources because the alignment of the structs were different in our local
duplicates...
Brings in the ACPICA naming sheme and isn't really clean either. So all of the
reconfiguration should probably just be moved into the ACPI bus_manager.
On the plus side we can now use the proper descriptive macros instead of the
hardcoded numbers which fixes a few of the TODOs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41393 a95241bf-73f2-0310-859d-f6bbb57e9c96
* increase _SYS_NAMELEN defined in sys/utsname.h to 128 to allow long(ish) revisions
* sHaikuRevision is now a static character array (in both libroot and kernel)
* adjust build tool set_haiku_revision to write the revision as string
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41389 a95241bf-73f2-0310-859d-f6bbb57e9c96
the first possible configuration. This will probably result in a "everything
mapped to a single IRQ" situation, but should get systems that make use of link
devices in APIC mode at least running.
To make more sensible decisions the interface has to be changed next as it
currently doesn't allow to get anything but the very first possible config.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41384 a95241bf-73f2-0310-859d-f6bbb57e9c96
resources we input the desired configuration and then set them. Note that the
set_current_resources() ("_SRS") method is pretty picky (on the low-level ACPI
side) and needs the configuration in exactly the form get_current_resources()
("_CRS") returns, so that's why we need to utilize that buffer as a template.
Looking at FreeBSD there seem to be systems that don't actually provide a
"_CRS", where we will need to fall back to using the get_possible_resources()
("_PRS") data to construct a valid template...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41383 a95241bf-73f2-0310-859d-f6bbb57e9c96
for the introduced get_pci_info() method in ACPI as it doesn't work reliably.
The new version should be more robust and efficient as it only resolves the
root bridge values once.
* Don't try to read and use the secondary bus register for the root bridge as
it isn't actually a normal bridge. We get the root bridge bus by using the
Base Bus Number (_BBN) method.
* Rewrite the logic to recurse down to all busses.
* Minor debug output changes to make the info more readable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41371 a95241bf-73f2-0310-859d-f6bbb57e9c96
IO-APIC can be easily enabled to test it on various configurations. Note that
the previous default opt-out didn't work because the safemode options would not
be touched at all when not actually entering the boot menu.
Once IO-APIC is more broadly tested this can be removed again and the opt-out
option reenabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41370 a95241bf-73f2-0310-859d-f6bbb57e9c96
to PCI devices partly using the new ACPI interface and by using bridge config
information from PCI.
* Added lookup of matching device/pin combinations and update of the relevant
interrupt line variable via the new PCI module function. This means that the
Global System Interrupt (GSI) that is used after switching to the IO-APIC is
now stored in the PCI config space and drivers enumerating these devices will
now attach their interrupt handlers to the right IRQs.
* Resolve all relevant interrupt information directly into the irq_routing_entry
so that can be used as the single source for config information. This includes
resolving the current setting of any PCI link devices into the irq field that
represents a GSI now.
* Use that info to configure interrupts in arch_int.cpp and remove the logic
there.
* Some cleanup and added debug output.
This implements the final missing part for using IO-APICs and full APIC mode for
interrupt routing. Note that there is no quirk handling of any form, so this
may very well not work on some configurations. Note also that I have tested this
only on one machine so far. Once proper testing is done the default of disabling
the IO-APIC can be removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41367 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Remove wrong extra line when printing an irq_descriptor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41339 a95241bf-73f2-0310-859d-f6bbb57e9c96
correct PCI IRQ routing table for that mode. With this, we finally get the right
PIRQ <-> Global System Interrupt mapping and can therefore program the right
IO APIC entries. The only missing part now is to fix up the pci_info of the
devices with the then active GSI.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41338 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The irq values we get from ACPICA are already converted, remove the wrong
extra conversion from bitfield to irq number.
* Add and handle extended irq structures.
* Disable the legacy PIC when done configuring the IOAPIC. Since during that
configuration the ACPI module is initialized, the ACPI SCI is still enabled
in the PIC instead of the IOAPIC. We'll have to delay that routing in the
ACPI module for it to work.
* Correctly handle the fixed IRQ case for the PCI interrupt routing (hopefully).
* Actually allow for enumeration of possible IRQ settings. Not yet used though.
All of this brings us a bit closer, though it still won't work for PCI
interrupts. ISA interrupts work fine through the IOAPIC as far as my hardware
goes, but PCI interrupts are connected to dedicated IOAPIC pins and I still
haven't figured out how to determine their exact routing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41328 a95241bf-73f2-0310-859d-f6bbb57e9c96
unload a driver. This was causing bug #4608 depending on the order of events;
now you should have less worries removing your USB device before having it
unmounted.
* Added a "legacy_device" KDL command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41119 a95241bf-73f2-0310-859d-f6bbb57e9c96
a problem on the Mac which obviously messed up its BIOS.
* This busy loops, but CPU utilization should be a maxed out in the boot loader
anyway - we could add a pause, though.
* This closes bug #2654.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41117 a95241bf-73f2-0310-859d-f6bbb57e9c96
the state of the ARM port to booting all the way up to the idle thread again.
However, will still need to investigate why we need the PHDRS magic, likely due to improper
setup of the ARM toolchain. If anyone has ideas, please let me know!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40937 a95241bf-73f2-0310-859d-f6bbb57e9c96
Another way would be to disallow removing such a path, as Linux does.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40819 a95241bf-73f2-0310-859d-f6bbb57e9c96
(now at least <std> and <offset> are supported properly)
* instead of creating a TimeZone object whenever needed, we now
create it in tzset() and keep it around
* add tests for TZ to locale_test
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40788 a95241bf-73f2-0310-859d-f6bbb57e9c96
* in case fd_ioctl() was about to return B_DEV_INVALID_IOCTL, translate to ENOTTY to satisfy #7279.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40787 a95241bf-73f2-0310-859d-f6bbb57e9c96
(Note, I honestly have no idea what was initially wrong with the code; everything seamt right to me..)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40676 a95241bf-73f2-0310-859d-f6bbb57e9c96
* fix debug-heap's handling of page-guarded allocations in realloc()
* let calloc() use page-guarded allocations, too, if requested
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40533 a95241bf-73f2-0310-859d-f6bbb57e9c96
using libroot_debug.so, instead of having to hardcode them in the application
via calling private heap functions.
* The following options are implemented: 'p' turns on paranoid validation,
'w' triggers periodic wall checking every 500ms ('W' does the same, but every
100ms), 'g' to use guard pages (beware, this will dramatically increase
memory usage), and 'r' which forbids reusing of memory, freed memory is never
actually freed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40514 a95241bf-73f2-0310-859d-f6bbb57e9c96
should help with the remaining I/O errors with (older) CDs that I see only on
Haiku. Not yet tested, though.
* Added a bit of debug output to see when/if it's triggered.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40344 a95241bf-73f2-0310-859d-f6bbb57e9c96
to themselves. This works around the problem that those symbols could be
resolved to symbols in the application, which is usually undesired. Weak
symbols have the same problem, but the the runtime loader cannot decide which
should be resolved locally and which mustn't.
The root issue is that BeOS style add-ons simply cannot be supported by a
standard-complying ELF loader.
Affects gcc 4 only, since with gcc 2 we link everything symbolically. The best
solution for the time being would be to build gcc 4 add-ons with default
hidden visibility, exporting only the symbols that should be visible.
Related ticket: #7114
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40248 a95241bf-73f2-0310-859d-f6bbb57e9c96
I hope I didn't break anything, as I can and have only test
bios_ia32's haiku_loader. Flame me otherwise.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40240 a95241bf-73f2-0310-859d-f6bbb57e9c96
a folder to some other place in the filesystem hierarchy
* add helper function to VFS that encapsulates the "conversion" of a
vnode-pointer to a fs_vnode-pointer (used by bindfs)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40238 a95241bf-73f2-0310-859d-f6bbb57e9c96
drivers in the future, such that NetworkStatus and similar software can show
nice names for the devices. The device manager should implement this and
return the B_DEVICE_PRETTY_NAME of the device (and in turn, new style drivers
should actually set this).
* Implemented handling of this ioctl in the scsi_periph to return the vendor/
product strings.
* Implemented this in the ATA bus manager to return the model from the info
block.
* KDiskDevice now fills in the partition_data::name if the B_GET_DEVICE_NAME
succeeds.
* As a side effect, at least BootManager now shows the drive name; maybe
DriveSetup does as well for the raw device.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40231 a95241bf-73f2-0310-859d-f6bbb57e9c96
used by tarfs anyway) instead of RLE.
While this should allows larger logo/icons, it doesn't remove the
current 300000 bytes size limits for haiku_loader, so #6710 is not yet fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40215 a95241bf-73f2-0310-859d-f6bbb57e9c96
resolve_symbol().
* find_undefined_symbol_beos(): Does now check whether
SymbolLookupInfo::requestingSymbol is defined, and, if so, returns it
directly. This saves the time for the hash table lookup and also works
around broken files like SoundPlay. Fixes the runtime loader part of #7094.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40211 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The team and thread kernel structures have been renamed to Team and Thread
respectively and moved into the new BKernel namespace.
* Several (kernel add-on) sources have been converted from C to C++ since
private kernel headers are included that are no longer C compatible.
Changes after merging:
* Fixed gcc 2 build (warnings mainly in the scary firewire bus manager).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40196 a95241bf-73f2-0310-859d-f6bbb57e9c96
pageOffset variable type from phys_addr_t to addr_t. Avoids potential width
difference when casting to pointer later (CID 4718).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40120 a95241bf-73f2-0310-859d-f6bbb57e9c96
variable type from phys_addr_t to addr_t. Avoids potential width difference
when casting to pointer later (CID 4719-4722).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40119 a95241bf-73f2-0310-859d-f6bbb57e9c96
the parameter (CID 5329).
* _MergeWithOnlyConsumer(): Removed the somewhat weird consumerLocked
parameter. The caller can unlock itself, if desired. Improves Unlock()
readability.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40084 a95241bf-73f2-0310-859d-f6bbb57e9c96
* inherit umask of calling process to images loaded via exec...()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40071 a95241bf-73f2-0310-859d-f6bbb57e9c96
CID 10271, though that's actually the only member it doesn't mention.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40068 a95241bf-73f2-0310-859d-f6bbb57e9c96
* apply a patch by hamish (as part of GCI) that lets fseek() discard
characters pushed onto the stream via ungetc()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@40055 a95241bf-73f2-0310-859d-f6bbb57e9c96
the address variable is incremented in the loop above and at the end will be
equal to sNextVirtualAddress if the address space can be reused. Fixes early
boot resets due to wrongly reused virtual addresses (and them being freed while
still in use by the original user). Fixes#7026, thanks to Urias for testing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39961 a95241bf-73f2-0310-859d-f6bbb57e9c96
Taking the size of a pointer instead of the actual extended registers struct.
Not sure this is used, but if it is it made the whole fpu/sse state in the
debugger useless.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39960 a95241bf-73f2-0310-859d-f6bbb57e9c96
the trace output against header being NULL (i.e. failed to map).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39958 a95241bf-73f2-0310-859d-f6bbb57e9c96
* close the dlopen()-ed image if the locale backend could not be created
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39950 a95241bf-73f2-0310-859d-f6bbb57e9c96
use strlcpy() instead of strcpy() for improved clarity, although
the buffer is always wide enough [famous last words ...]
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39948 a95241bf-73f2-0310-859d-f6bbb57e9c96
In r21611, about 3 years ago, the switch into protected mode was moved
from stage1 to stage2, which makes stage1 obsolete. You have to use
"pxehaiku-loader" when booting Haiku by PXE on x86.
Trying to use stage1 to boot stage2 resulted in tripple fault during
setup of ss segment, because stage1 switches to protected mode before
calling stage2, but stage2 expects real mode. The documentation is not
up to date.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39881 a95241bf-73f2-0310-859d-f6bbb57e9c96
property change notifications being sent as having occurred for the team's
main thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39865 a95241bf-73f2-0310-859d-f6bbb57e9c96
only a few events can be watched (team creation/deletion/exec, thread creation/
deletion/name changes). The functions start_system_watching()/
stop_system_watching start/stop watching events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39862 a95241bf-73f2-0310-859d-f6bbb57e9c96
automatically cleaned up when the team is deleted: Class AssociatedData is
the base class for a data item, AssociatedDataOwner a container for them
(struct team derives from it). Functions team_associate_data() and
team_dissociate_data() add/remove data.
* Turned sTeamHash into a BOpenHashTable (necessary since struct team is no
longer a POD).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39860 a95241bf-73f2-0310-859d-f6bbb57e9c96
if they're not found from current working directory.
Fix#6427.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39661 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented missing handling of symbolically linked images and of weak
symbols.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39646 a95241bf-73f2-0310-859d-f6bbb57e9c96
first. Fixes binary compatibility issue introduced with symbol preemption
support in the runtime loader. For unknown reasons liblayout.so, though
linked symbolically, contains a non-weak (!), preemptable BFont type info,
which was no longer resolved correctly with the new method.
Fixes#6892.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39617 a95241bf-73f2-0310-859d-f6bbb57e9c96
process_vt100_command() would be invoked with argument count 1 (instead of 0).
This broke e.g. the "dis" command and the command history navigation.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39584 a95241bf-73f2-0310-859d-f6bbb57e9c96
Btw Axel, keyboard.cpp (forked from the bios_ia32 one) is still under "OpenBeOS licence" with 2 other copies, I suppose you are ok to change to MIT ?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39548 a95241bf-73f2-0310-859d-f6bbb57e9c96
- fix nat_feat_call() macro for more than 1 arg,
- add BOOTSTRAP natfeat calls get_bootdrive() and get_bootargs().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39491 a95241bf-73f2-0310-859d-f6bbb57e9c96
make some more perl tests happy.
* no longer expect a ICU timezone ID in the TZ environment variable,
but only expect this format if the TZ-value is starting with ':'
* accept "standard" TZ-values like "EST5" (of which only "EST" is
relevant to us) - if such a value is specified, we hardcode the
timezone name to the given value, no matter how ICU calls it
* adjust tests accordingly
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39415 a95241bf-73f2-0310-859d-f6bbb57e9c96
* remove declaration of ctype-..._l() functions, as we do not provide
them and they are not really needed by our hacked glibc
* replace remaining invocations of isspace_l() and isupper_l() in glibc
with isspace() and isupper() respectively
This allows libroot to be built in DEBUG mode, again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39380 a95241bf-73f2-0310-859d-f6bbb57e9c96
passing an additional -Wall to the compiler, which may actually
have unwanted effects. -Wall is standard by the build system.
Also, -Wno-multichar was passed unnecessarily for Haiku targets.
I didn't remove it for the bfs_shell, hope this is what Ingo meant
in the ticket.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39314 a95241bf-73f2-0310-859d-f6bbb57e9c96
actually implement those, if we decide to support global
constructors/destructors in kernel add-ons.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39300 a95241bf-73f2-0310-859d-f6bbb57e9c96
Itanium ABI. Whether __cxa_atexit() really works for associating hooks with
DSOs has not been tested yet, as our compiler doesn't use the function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39298 a95241bf-73f2-0310-859d-f6bbb57e9c96
Only looses high intensity color from the plain console, but doesn't eat keystrokes, and a 2nd window opens for dprintf stuff.
Only Amiga makes it possible ;-)
http://revolf.free.fr/beos/shots/shot_haiku_loader_amiga_m68k_004.png
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39264 a95241bf-73f2-0310-859d-f6bbb57e9c96
However all modes available are planar, and there doesn't seem to be a way to tell it in the kernel args framebuffer struct...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39255 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Disable TRACE output of ELF relocation
* Implement R_ARM_RELATIVE (for kernel modules)
No more errors on 'loading' of kernel modules now!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39220 a95241bf-73f2-0310-859d-f6bbb57e9c96
We now boot right up to "INIT: main: done... begin idle loop on cpu 0" ! :)
(Please note that there's still *lots* stubbed out)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39219 a95241bf-73f2-0310-859d-f6bbb57e9c96
- This is mostly a copy of the x86 32bit paging method and infrastructure, this was copied for two reasons:
1) It is the most complete VM arch
2) The first ARM PAE patches have landed on alkml, so we will have to deal with it in the future as well,
and this infrastructure has proven to be ready ;)
- No protection features, or dirty/accessed tracking yet
- Lots of #if 0
but....
It boots all the way up to init_modules() now, and then dies because of a lack of (ARM) ELF relocation implementation!
Since at this point the VM can be fully initialised, I'm going to focus on CPU exceptions next, so we can get KDL to trigger
when it happens, and I can actually debug from there ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39206 a95241bf-73f2-0310-859d-f6bbb57e9c96
userland single-stepping is enabled for the thread.
* x86_exit_user_debug_at_kernel_entry(): Always store DR6 and DR7 in the CPU
structure, not only when breakpoints are installed.
* x86_handle_debug_exception(): When encountering a syscall single-step, also
set the THREAD_FLAGS_DEBUG_THREAD thread flag. Otherwise the
B_THREAD_DEBUG_STOP would be ignored.
* x86 interrupt handling, DISABLE_BREAKPOINTS():
- Renamed to STOP_USER_DEBUGGING().
- Now it also call x86_exit_user_debug_at_kernel_entry() when
THREAD_FLAGS_SINGLE_STEP is set, so that the debug registers are saved.
Fixes#6751.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39201 a95241bf-73f2-0310-859d-f6bbb57e9c96
flag, when B_THREAD_DEBUG_SINGLE_STEP is set. Not sure, if there ever was a
reason to do that, but there isn't now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39200 a95241bf-73f2-0310-859d-f6bbb57e9c96
Generate a list of video modes, though there seem to be some dups and missing ones... The Nominal resolution doesn't mean it can't be better.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39135 a95241bf-73f2-0310-859d-f6bbb57e9c96
Seems there is a lowlevel.library which might be easier to use for keyboard, add some defs for it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39113 a95241bf-73f2-0310-859d-f6bbb57e9c96
Fix the console and remove test panics. We now display the menu, although not in the best colors :
http://revolf.free.fr/beos/shots/shot_haiku_loader_amiga_m68k_002.png
(Yes, the mouse moves too :p)
Amiga !!!!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39074 a95241bf-73f2-0310-859d-f6bbb57e9c96
It crashes for now though, seems we have a stack alignment issue or maybe mangled registers. Or maybe it's due to non-static initializers not being done.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39053 a95241bf-73f2-0310-859d-f6bbb57e9c96
* More code cleanup....
Currently working on getting the MMU code on the kernel side to function correctly, some progress already there, will follow in later commits...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38988 a95241bf-73f2-0310-859d-f6bbb57e9c96
jam -q -sHAIKU_BOOT_BOARD=verdex haiku-arm-image
will build "haiku_verdex_flash_image_raw.img"
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38984 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implement cpu detection using Exec's AttnFlags.
Now panics a little later.
Note you need to tell UAE to emulate a 040 now (020 not supported) with -C4 to boot.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38956 a95241bf-73f2-0310-859d-f6bbb57e9c96
It seems DoIO() fails after 6 sectors. Could it have something to do with side handling ? I hope I won't have to dig trackdisk.device specific stuff...
Anyway even with 6 sectors read, the boot code now calls _start() successfully. Use _floppy_err_alert() to assert this until the copying is fixed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38951 a95241bf-73f2-0310-859d-f6bbb57e9c96
possible mismatch images info between loader and kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38947 a95241bf-73f2-0310-859d-f6bbb57e9c96
Bruno Haible's libunistring, which seems to work just fine
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38936 a95241bf-73f2-0310-859d-f6bbb57e9c96
Initialize SysBase and IntuitionBase that will be needed by C++ code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@38933 a95241bf-73f2-0310-859d-f6bbb57e9c96
