Gerald Zajac. Thanks a lot!
* Also put it on the image by default.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25583 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now always only use the primary ring buffer.
* Removed secondary ring buffer allocation and member fields.
* Increased size of the primary ring buffer to 65536 bytes.
* The bytes per row register is computed differently for 9xx chips.
* On G33, the overlay does not need a physical address anymore, so we
don't pass B_APERTURE_NEED_PHYSICAL to the allocation anymore for that
device.
* intel_free_memory() accidently added the aperture base to the allocation
and would therefore never free any memory.
* INTEL_RING_BUFFER_SIZE_MASK was shifted one bit to the right, didn't
cause any harm with our buffer sizes, yet, though.
* With these changes, the driver runs stable on a G33 chipset (I have not
yet tested the hardware cursor, though, it might need some work, too).
The only known issue left is that overlay flickers a bit if its buffer
is partially backed up by reserved and allocated memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23798 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed "physical" parameter of GART's bind_aperture() - I don't think this
be of use to anyone.
* Fixed binding/unbinding pages in the Intel GART driver; I accidently shifted
the page offset twice.
* Actually forgot handling of allocated memory in Aperture::BindMemory().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now uses the AGP GART module for memory management. This greatly simplifies
the memory handling, and memory is now actually allocated on demand,
instead of a fixed size (stolen memory is not freed, though).
* The Intel GART module should now also work with older chipsets.
* No longer remove the GTT size from the stolen memory; this appears to have
been a mistake in the X driver. Not sure about the BIOS popup yet.
* The AGP module (in combination with the Intel GART module) is now mandatory
to use the Intel driver.
* Removed now superfluous settings (like memory size). Only enabling/disabling
the hardware cursor is still supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some defines needed when playing with the bridge controller.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23753 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set_gtt_entry() used the wrong index to fill the GTT - this could have never
worked correctly when you specified more memory than the amount of stolen
memory.
* Implementing maintaining resources for emulating overlay using the 3D engine
on i965. I don't yet commit the actual overlay code, as that is a) ugly, and
b) does not work yet.
* Moved AreaKeeper into its own header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented mapping the GTT area for i9xx chips other than the i965. This should also fix the
driver working with these chips at all.
* The memory used by the driver now take the GTT area into account - before the GTT could be
overwritten theoretically...
* Added fix for some i965 quirks from the X driver.
* Added some overlay definitions for the i965.
* Started support for G33 overlay (not complete yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23220 a95241bf-73f2-0310-859d-f6bbb57e9c96
- in order to set cursor position SVGA_CURSOR_ON_SHOW has to be written to register SVGA_REG_CURSOR_ON.
- do not use alpha cursor because it does not support inverting of source pixels.
- Fixed wrong usage of if-statement inside switch-statement
- Sync at end of SCREEN_TO_SCREEN_BLIT so that app_server does not write to frame buffer while accelerated operation is still running.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23193 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented MakeSpace() (not yet tested).
* Changed intel_wait_engine_idle() to spin() between reads and to timeout
after 1 second of waiting (could probably be done way earlier).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23120 a95241bf-73f2-0310-859d-f6bbb57e9c96
acceleration works fine, but overlay doesn't - that's next on my list.
Turns out the i965 differentiates between RGB-32 and RGB-32-alpha, and
didn't like trying to use the latter as display mode (the i865 didn't
care at all)... finding that took me *way* too long, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22780 a95241bf-73f2-0310-859d-f6bbb57e9c96
will happen on earlier i9xx chips for now...). Not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now supports the new B_GET_EDID_INFO hook under Haiku.
* Fixed build under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22551 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create their mode list. Once it's done, it should cover all possible cases,
and allow the base mode list to reside in the app_server (under Haiku, at least),
so that all drivers will benefit from an updated list.
Right now, it might already work to a degree, but it's not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22517 a95241bf-73f2-0310-859d-f6bbb57e9c96
not take the VCO limits into account; both could (and would during testing) create invalid
frequencies.
* Also reverted the order in which the PLL divisors are traversed to match the order of what
is used in the X driver to create comparable output (our error computation is based on float,
though, and should therefore create more accurate values).
* The i965 introduced a special register for the surface; the former display base register
is now only used for the view offset. Instead of setting the base manually here and there,
there is now a set_frame_buffer_base() function.
* The DPMS code will now also turn off/on the PLL clock generator.
* The code needs some more cleanup, and while the driver now produces the correct timing on
my i965 system, I'm now greeted by a black screen after startup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22289 a95241bf-73f2-0310-859d-f6bbb57e9c96
nothing is done with the data yet (besides dumping them to the serial output).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22272 a95241bf-73f2-0310-859d-f6bbb57e9c96
* i2c_bus now contains a i2c_timing structure, so that you don't need
both to talk to the I2C bus.
* Therefore, there is now a void ddc2_init_timing() function to get the
the timing DDC needs.
* Cleanup in radeon's monitor_detection.c, and updated it to work with
the DDC/I2C changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22265 a95241bf-73f2-0310-859d-f6bbb57e9c96
this should fix bug #1293.
I've tested it here on two machines, one works better now, the other stayed the
same (Radeon 9250, and a laptop FireGL (id 4c66) version). This apparently also
fixed bug #1394.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21930 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a TRACE_S3SAVAGE macro that turns on debug output - should be set conditionally
if DEBUG is defined (see DriverInterface.h), but is currently always on, as requested
by Gerald.
* Some minor style fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21492 a95241bf-73f2-0310-859d-f6bbb57e9c96
fixed warnings and code style. Please, from now on, provide *patches* to this version.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21421 a95241bf-73f2-0310-859d-f6bbb57e9c96
Implemented SetIndexedColors hook, although not really correct.
I don't know why the driver's 8 bit mode were disabled. They seem to
work fine. I had to enable at least 640x480x8 to be able to test
WindowScreen. There are some TODOs in the code. I'll look into them
later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21410 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly.
* Got rid of this superfluous cookie stuff - either the VFS behaves correctly, or
we're screwed anyway.
* Made adding debugger commands optional depending on if DEBUG_COMMANDS is defined
or not.
* Minor other cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21322 a95241bf-73f2-0310-859d-f6bbb57e9c96
doesn't work on i965 yet.
* B_GET_DISPLAY_MODE now returns the mode actually configured in the chip instead
of the last mode set; while this isn't really necessary, it allows to check what
mode was used during startup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21321 a95241bf-73f2-0310-859d-f6bbb57e9c96
also renamed their accelerants and settings files accordingly.
* Added Mandelbrot and GLDirectMode as demo applications.
* Moved CortexAddOnHost to /bin.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21010 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use AGP Bus manager module
* Fixed wrong framebuffer address computation; this should fix bug #1079.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20336 a95241bf-73f2-0310-859d-f6bbb57e9c96
Monitor Routing rework
* mostly to fix my issues with dual monitors VGA + DVI which didn't work! ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20275 a95241bf-73f2-0310-859d-f6bbb57e9c96
* New "ATOM" BIOS Support for radeons X-series
* This also removes scanning for the BIOS signature for other cards
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20272 a95241bf-73f2-0310-859d-f6bbb57e9c96
Made the following changes from the version I got from Eric:
* made BppForSpace() in DriverInterface.h inline to remove some warnings
* renamed driver source files to lower case.
* removed Be Inc. copyright from kernel driver as I couldn't see anything coming
from Be Inc. there - correct me if I was wrong, Eric.
* Minor other changes like added missing header guards.
* The README provided in the main directory is only included in the accelerant
directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19793 a95241bf-73f2-0310-859d-f6bbb57e9c96
* In grayscale mode, the AccelerantHWInterface now sets the palette correctly.
* HWInterface now has a fVGADevice set by AccelerantHWInterface which will be used
to talk to the VESA driver.
* Completed planar blitting for all 4 planes; we now have a perfect 16 color
grayscale mode when you choose "Standard VGA mode" in the boot loader with
an unsupported graphics card (such as in Qemu).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19567 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Corrected wrong ID association (0x4e50 is M11-based, not M10-based).
- Implemented fixed dividers support for laptop panel refresh rate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19209 a95241bf-73f2-0310-859d-f6bbb57e9c96
under Haiku, though. If someone has access to this card, feel free to fix this :-)
I renamed the driver to s3savage (from BeSavage), and added the license text
separately (dunno if that's really needed, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18978 a95241bf-73f2-0310-859d-f6bbb57e9c96
