* This makes sem_delete_owned_sems() a lot more efficient; before it would need
to scan the entire semaphore table.
* This speeds up the test build of the kernel by another 2 seconds (with
KDEBUG=2) on my laptop.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33743 a95241bf-73f2-0310-859d-f6bbb57e9c96
(hopefully) correct place.
* It seems to be even harder to understand basic locking primitives: when you
think about it, it shouldn't surprise you that conditional variables never
return B_WOULD_BLOCK. This fixes gdb again.
* Added tracing support to the ports subsystem.
* get_port_message() will now resize the port heap if needed (but will also
take timeouts into account while doing so, more or less). The initial port
space is 4MB (as before), the growth rate is the same, and the system wide
limit is arbitrarily set to 64 MB (all swappable). A team limit has been set
to 8 MB, but is not enforced yet. Since ports are using up address space in
the kernel, those seems to be proper limits.
* This also fixes a strange, and rare lockup where the mouse cursor would still
move, but everything else would basically hang, but look perfectly normal from
KDL on the first look. As recently happened on Brecht's laptop, and debugged
by mmlr and me: the cbuf space got used up when lots of windows wanted to
redraw after a workspace switch. The app_server wouldn't answer anymore to
client requests, but thought it would have done so, as LinkSender::Flush()
doesn't care if it got a B_NO_MEMORY (the ports will now block until memory
is available if possible, so that should not be a problem anymore).
* Improved "port" KDL command, it now also prints the messages in the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33735 a95241bf-73f2-0310-859d-f6bbb57e9c96
* its own heap allocator instead of cbuf - this makes cbuf superfluous, and I
therefore removed it from the kernel. The heap is swappable, so lifts the
kernel's resource usage a bit. In the future, the heap should grow as well;
right now it should be at least as good as before.
* it no longer uses spinlocks, but just mutexes now for better scalability - it
was not usable with interrupts turned off anyway (due to its semaphore usage).
* it no longer uses semaphores, but condition variables.
* Needed to move the port initialization to a later point, as swappable memory
wasn't usable that early.
* All ports test are still passing, hopefully I didn't mess anything up :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33728 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Allow an allocator to be created on the heap to allow for non-locked
allocators to be created.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33721 a95241bf-73f2-0310-859d-f6bbb57e9c96
read out in the ConditionVariableEntry::WaitStatus(). That way you can notify
with a specific status that can be read out on the other end.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33718 a95241bf-73f2-0310-859d-f6bbb57e9c96
high contention of the read lock (I experimented with the VM page mapping
lock)), it actually hurt the compile performance pretty obviously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33647 a95241bf-73f2-0310-859d-f6bbb57e9c96
makes the reader case a lot less expensive, and should relieve the thread
spinlock contention a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33643 a95241bf-73f2-0310-859d-f6bbb57e9c96
Locker.cpp.
* The services are now using recursive_locks, and rw_locks instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33548 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the free and/or clear queue. This performs better in the case where only few
pages are free/clear but performs worse in the case where there are a lot of
usable pages. It's not used anywhere but it might come in handy one time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33527 a95241bf-73f2-0310-859d-f6bbb57e9c96
takes a list of iovecs describing the physical pages to be mapped. With it one
can map a set of physically disjoint pages into one linear virtual range. This
is a private API right now, but we might want to make it public as
map_physical_memory_vecs alongside map_physical_memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33523 a95241bf-73f2-0310-859d-f6bbb57e9c96
are required to be physically contiguos, which should be reworked to put them
into seperate iovecs. Still this manages to combine a great deal of page
writes into larger bursts already. Reduces the amount of IO requests being
scheduled (and greatly benefits media where page wise writes are slow when
they are accessed through a non-IOScheduler path, i.e. USB mass storage until
that is properly implemented).
* Abstracted per page page writing tasks into a PageWriteWrapper class.
* Abstracted per transfer page writing tasks into PageWriteTransfer class which
formerly was the PageWriterCallback.
* Use both classes from the PageWriterRun and from
vm_page_write_modified_page_range to remove code duplication.
* Adjusted synchronous VMAnonymousCache::Write() to cope correctly with larger
iovecs and more than one iovec. It assumed that there was exactly one page per
vector previously.
* Introduced MaxPagesPerWrite() and MaxPagesPerAsyncWrite() to VMCache to allow
a cache to specify restricitions. VMAnonymousCache does restrict the max pages
to 1 for WriteAsync right now as I didn't feel like reworking that one to cope
with non single page writes just yet.
* Pulled out PageWriteTransfer methods for better readability.
* Some typo fixes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33507 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed vfs_get_vnode_from_fd() return type.
- Added vfs_open_vnode().
- Added a "bool traverseLeafLink" parameter to vfs_get_fs_node_from_path().
It was always resolving symlinks.
* device manager/devfs:
- devfs: get_node_for_path() no longer resolves leaf symlinks. That still
doesn't help with file disk devices, as creating partition wouldn't work
anyway.
- Pulled the module-related implementation part of BaseDevice into new class
AbstractModuleDevice and made all methods of BaseDevice virtual. Small
adjustments to devfs to be happy with the new BaseDevice interface.
- Added BaseDevice subclass FileDevice, which maps the interface to a file's
file descriptor. Still got a few TODOs, but should basically work.
- Use FileDevice for publishing file disk devices in devfs. Now those do
actually work, though there's some BFS trouble with one of the images I
tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33385 a95241bf-73f2-0310-859d-f6bbb57e9c96
Remove the 4 cores limit at boot, and fix the allocator to handle 8 cores.
There are still performance problems, but this allows booting with 8 cores.
WARNING: since this changes x86 platform kernel args, you really don't want to update haiku_loader and kernel_x86 separately!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33349 a95241bf-73f2-0310-859d-f6bbb57e9c96
aren't routed correctly over the 8259, it seems.
- Removed passing the hpet_regs around, since there's a static variable.
- Added lots of debug dprintfs.
- Fixed setting the timer interrupt to edge
- Timer is initialized once.
- Use the timer 0 instead of 2.
- Renamed register definitions to be more readable
- Use 64 bits registers and unions where applicable.
- Other things I don't remember
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33345 a95241bf-73f2-0310-859d-f6bbb57e9c96
Also shortened some defines using "TN" instead of "TIMER". It's also
the same scheme used in the specs
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33334 a95241bf-73f2-0310-859d-f6bbb57e9c96
mapped pages and a non-read and non-write protection to block a certain address
range from being used by anything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@33030 a95241bf-73f2-0310-859d-f6bbb57e9c96
* scheduler_enqueue_in_runqueue() now allows the scheduler to return a hint as to whether a reschedule is desirable or not. This is used in a few other places in order to relegate scheduling decisions entirely to the scheduler rather than the priority hacks previously used. There are probably other places in the kernel that could now make use of that information to more intelligently call reschedule() though.
* Switch over the default scheduler to scheduler_affine().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32554 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Keep track of the currently running threads.
* Make use of that info to decide if a thread that becomes ready should preempt
the running thread.
* If we should preempt we send the target CPU a reschedule message.
* This preemption strategy makes keeping track of idle CPUs by means of a bitmap
superflous and it is therefore removed.
* Right now only other CPUs are preempted though, not the current one.
* Add missing initialization of the quantum tracking code.
* Do not extend the quantum of the idle thread based quantum tracking as we want
it to not run longer than necessary. Once the preemption works completely
adding a quantum timer for the idle thread will become unnecessary though.
* Fix thread stealing code, it did missed the last thread in the run queue.
* When stealing, try to steal the highest priority thread that is currently
waiting by taking priorities into account when finding the target run queue.
* Simplify stealing code a bit as well.
* Minor cleanups.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32503 a95241bf-73f2-0310-859d-f6bbb57e9c96
Revert back start of kernel space to the usual place, no need to differ from other archs here.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32401 a95241bf-73f2-0310-859d-f6bbb57e9c96
Start of framebuffer initialization for the Verdex board.
For now it points to the data section as framebuffer for testing and shows an RGB pattern.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32352 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The vesa driver no longer uses VGA programming if the chip does not support
VGA compatibility.
* The VESA driver now tries to set the DAC to 8 bits per color gun.
* In VESA modes, the driver no longer tries to use VGA programming; introduced
the new vesa_set_indexed_colors() that is now used for palette programming.
This should fix wrong colors of 8 bit BWindowScreen users with VESA on real
hardware (emulators usually didn't mind either way).
* Note that the app_server needs to maintain a palette per 8 bit screen, as
right now, the colors are garbled after a workspace switch. Stefano, are you
looking into that already?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32347 a95241bf-73f2-0310-859d-f6bbb57e9c96
- don't clobber the parameter regs in the entry point,
- fix entry point address for netbsd loader emulation,
- added a gUImage global to point to the uimage blob with the tgz,
- added tgz info to platform stage2 args,
- add simple uimage support, just dumps the header and gets the nth blob in the image, (seems we have a bug in the math code, some infos don't print),
- made devices.cpp use them to publish the MemoryDisk,
- add an haiku_loader_nbsd.ub target which puts both the loader and kernel_arm for now (need to replace with the tgz).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32295 a95241bf-73f2-0310-859d-f6bbb57e9c96
- moved board/ folder around again, it probably belongs only to kernel stuff,
- added board_config.h templates for gumstix boards.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32197 a95241bf-73f2-0310-859d-f6bbb57e9c96
- added some multiboot support code:
- dump some of the passed info,
- parse command line (skip the 'kernel' name and pass the rest to stage2_args.arguments),
- added an add_stage2_driver_settings() function which takes stage2_args.arguments and translates it into safe mode driver settings, a bit dumb for now.
This allows using qemu -kernel haiku_loader -append 'debug_screen true' and get debug output without having to enter the menu (once multiboot info is used to determine the boot device too).
The idea is to allow passing driver settings and using them to pass extra stuff (like 'force_keymap fr' and other stuff for demo), and to help automate tests ('run_test /bin/sometest').
This should answer Axel's question :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32076 a95241bf-73f2-0310-859d-f6bbb57e9c96
allow for more parallelism. Also introduce seperate locks for the bins and
for page allocation. This greatly reduces lock contention and reduces the
duration the locks are held due to them overall protecting less code. Now only
allocations of the same size hitting the same allocator or allocating larger
chunks of memory should block. Previously, basically any allocation and also
free would be mutually exclusive, making it scale pretty badely.
* Added memalign_nogrow(). As it uses heap_memalign() anyway, there's no real
reason not to allow for an alignment.
* Some cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32074 a95241bf-73f2-0310-859d-f6bbb57e9c96
ROUNDUP to use '*' and '/' -- the compiler will optimize that for powers of
two anyway and this implementation works for other numbers as well.
* The thread::fault_handler use in C[++] code was broken with gcc 4. At least
when other functions were invoked. Trying to trick the compiler wasn't a
particularly good idea anyway, since the next compiler version could break
the trick again. So the general policy is to use the fault handlers only in
assembly code where we have full control. Changed that for x86 (save for the
vm86 mode, which has a similar mechanism), but not for the other
architectures.
* Introduced fault_handler, fault_handler_stack_pointer, and fault_jump_buffer
fields in the cpu_ent structure, which must be used instead of
thread::fault_handler in the kernel debugger. Consequently user_memcpy() must
not be used in the kernel debugger either. Introduced a debug_memcpy()
instead.
* Introduced debug_call_with_fault_handler() function which calls a function
in a setjmp() and fault handler context. The architecture specific backend
arch_debug_call_with_fault_handler() has only been implemented for x86 yet.
* Introduced debug_is_kernel_memory_accessible() for use in the kernel
debugger. It determines whether a range of memory can be accessed in the
way specified. The architecture specific back end
arch_vm_translation_map_is_kernel_page_accessible() has only been implemented
for x86 yet.
* Added arch_debug_unset_current_thread() (only implemented for x86) to unset
the current thread pointer in the kernel debugger. When entering the kernel
debugger we do some basic sanity checks of the currently set thread structure
and unset it, if they fail. This allows certain commands (most importantly
the stack trace command) to avoid accessing the thread structure.
* x86: When handling a double fault, we do now install a special handler for
page faults. This allows us to gracefully catch faulting commands, even if
e.g. the thread structure is toast.
We are now in much better shape to deal with double faults. Hopefully avoiding
the triple faults that some people have been experiencing on their hardware
and ideally even allowing to use the kernel debugger normally.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32073 a95241bf-73f2-0310-859d-f6bbb57e9c96
- stubbed out arch_cpu_init_percpu(),
- make atomic ops declarations extern "C",
- move calls to [i]sync inside the asm code that needs it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32067 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
used to mark entries after recovering a tracing log from a previous session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31991 a95241bf-73f2-0310-859d-f6bbb57e9c96
call to fetch non-clear pages.
* B_PHYSICAL_BASE_ADDRESS does now imply B_CONTIGUOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31932 a95241bf-73f2-0310-859d-f6bbb57e9c96
each attribute access needed 3 syscalls, now only one as it should.
* Renamed the new Haiku call fs_open_attr() to fs_fopen_attr(), and added a new
function fs_open_attr() that takes a path (same semantics as the
fs_[f]open_attr_dir() functions already present in BeOS).
* Merged former _kern_open_attr(), and _kern_create_attr() into one syscall.
* Cleaned up vfs.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31881 a95241bf-73f2-0310-859d-f6bbb57e9c96
Tracker's OpenHashTable.h which it should eventually replace. We've renamed the
class to BOpenHashTable and changed the interface slightly so that HashTableLink
became superfluous.
Adapted all the code that used it. Since the OpenHashTables no longer clash,
this should fix the GCC4 build.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31791 a95241bf-73f2-0310-859d-f6bbb57e9c96
functions.
* Since we now use UserStringParameter, this fixes the missing null termination
of the parameter string, and thus bug #4045.
* Removed UserMemoryParameter, as it's no longer in use.
* Adjusted syscalls accordingly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31779 a95241bf-73f2-0310-859d-f6bbb57e9c96
there are prefixed with the respective architecture name. Useful for remote
debugging a different architecture.
* <x86/arch_debugger.h>: Introduced a structure for the FPU state, so that it
isn't left to the debugger.
* Removed the _kern_get_thread_cpu_state() syscall. Was originally intended for
bdb compatiblity, but isn't really needed.
* Kernel x86 arch_get_debug_cpu_state(): The use of fnsave was broken, since
it reinits the FPU after saving the state. This resulted in weird results
when debugging functions using the FPU. We now use fxsave, if available.
Otherwise fnsave + frstor should be used -- not fully implemented yet.
Same for arch_set_debug_cpu_state().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31682 a95241bf-73f2-0310-859d-f6bbb57e9c96
parameter from start_system_profiler().
* Added stack depth, and interval parameters to it, though.
* Profiling the boot process is now possible.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31671 a95241bf-73f2-0310-859d-f6bbb57e9c96
patch from about a year ago (I couldn't use any code of his yet, though,
but there are a few things left). The emergency keys are triggered by
pressing Alt-SysReq + key.
* By default, only Alt-SysReq+'d' is used as a means to deliberately enter
the kernel debugger. F12 belongs to userland again, now :-)
* Debugger add-ons now have another optional method to implement their own
emergency keys - 'd' for the debugger cannot be overridden, though.
* The mechanism can be turned off via a new kernel setting, so it's not that
easy anymore to "crash" Haiku if you don't want to.
* Right now, the PS/2 driver, and the pre-input_server in-kernel debugger
keyboard mini-driver support this, USB not yet.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31660 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added missing name parameter to the partitioning system module child creation
and child creation validation hooks. Pass the name to them.
* Added BPartitionParameterEditor interface, which is/will be used for editing
disk system specific parameters.
* Implemented partition parameter editors for BFS initialization and Intel
partition map child creation.
* Fixed the incorrect supported child partition type iteration in the Intel
partition map add-on. It does now return actual types.
* Handle the "active" flag parameter in the Intel partitioning system module.
* DriveSetup:
- Replaced the "Create" submenu by a simple menu item. The type can now by
chosen in the dialog.
- Make use of initialization and child creation parameter editors. Some
non-generic code has been moved to the respective editor implementations
(BFS, intel partitioning system).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31658 a95241bf-73f2-0310-859d-f6bbb57e9c96
* devfs:
- devfs_[un]publish_partition(): They no longer get the partition path as
parameter, but rather the device path and the partition name.
- Added devfs_rename_partition(), which renames an already published
partition node.
* KPartition/KDiskDevice:
- Replaced the fPublished flag by fPublishedName, the name under which the
partition is published. This simplifies UnpublishDevice() and makes it
practically infallible.
- Added GetFileName(), which only returns the partition's file name.
Simplified GetPath() by using it.
- When a partition is added/removed the subsequent sibling partitions get a
new index. Now we also rename their published device nodes (and those of
their descendents). When something goes wrong we unpublish the concerned
partition's device to be on the safe side. Would be a shame to accidentally
format the wrong partition, eh? :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31520 a95241bf-73f2-0310-859d-f6bbb57e9c96
KPartition::CreateChild(). CreateChild() calls AddChild(), which publishes
the new partition, though at that point offset and size were not set, so that
the published devices would not be usable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31463 a95241bf-73f2-0310-859d-f6bbb57e9c96
after all CPUs have been queried for their features. On SMP machines
sysenter/sysexit weren't used before due to the non-boot CPUs appearing not
to have the feature.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31226 a95241bf-73f2-0310-859d-f6bbb57e9c96
is a syscall iframe.
* User debugger support: Don't to call BreakpointManager::PrepareToContinue(),
if the thread returns from a syscall. We don't want to skip breakpoints in
that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31223 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The bulk of the work -- i.e. juggling the software and hardware breakpoints,
watchpoints, and memory reads/writes -- is done in the new class
BreakpointManager.
* For the architectures a few capability macros have to be defined, one
pointing to the software breakpoint instruction opcode. Done for x86.
* Some more simplifications in the user debugger code, made possible by the
recently introduced debugger_changed_condition attribute.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31214 a95241bf-73f2-0310-859d-f6bbb57e9c96
installed team debugger and adjusted the code accordingly. It's not needed yet,
but I intend to add support for software breakpoints and those require a bit of
uninitialization that needs to be synchronized with debugger changes and can't
be done with interrupts disabled.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31194 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed unused inner struct State.
* Added work-around for the extremely annoying "fState my be used
uninitialized" warning gcc 4 produces. I'm not aware of any solution that
doesn't generate unnecessary code. :-/
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31193 a95241bf-73f2-0310-859d-f6bbb57e9c96
and added a _kern_unreserve_address_range() as well.
* The runtime loader now reserves the space needed for all its areas first
to make sure there is enough space left for all areas of a single image.
* This also fixes the final part of bug #4008.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31115 a95241bf-73f2-0310-859d-f6bbb57e9c96
the first part of making the runtime loader behave itself; it should already
make Clockwerk run okay with any number of translators (even if not all of
them will work yet).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31113 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Generalized address checks. The debugger can now also read the commpage.
* Added new syscall _kern_get_thread_cpu_state() to get the CPU state of a
not running thread. Introduced arch_get_thread_debug_cpu_state() for that
purpose, which is only implemented for x86 ATM (uses the new
i386_get_thread_user_iframe()).
* Don't allow a debugger to change a thread's "esp" anymore. That's the esp
register in the kernel. "user_esp" can still be changed.
* Generally set RF (resume flag) in eflags in interrupt handlers, not only
after a instruction breakpoint debug exception. This should prevent
breakpoints from being triggered more than once (e.g. when the breakpoint is
on an instruction that can cause a page fault). I still saw those with bdb
in VMware, but that might be a VMware bug.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31045 a95241bf-73f2-0310-859d-f6bbb57e9c96
boot device is actually read-only (even if it's using the write overlay).
* Do not create a swap file on a read-only device - this would really be a
stupid use of the write overlay (just saw this happening on an older
machine).
* Made swap_file_{add|delete}() take a const char* path - there was no reason
this was writable, and this also avoids casting away the const when adding
the default swap file.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30975 a95241bf-73f2-0310-859d-f6bbb57e9c96
have a simple dedicated heap for the kernel debugger with stacked allocation
pools (deleting a pool frees all memory allocated in it). The heap should
eventually be used for all commands that need temporary storage too large for
the stack instead of each using its own static buffer.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30949 a95241bf-73f2-0310-859d-f6bbb57e9c96
- While walking down the cache chain, we keep all upper caches locked.
- When we have to unlock -- when waiting for a busy page or reading a page in
-- we unlock completely, including the address space, and restart
vm_soft_fault().
- Folded fault_get_page() and fault_find_page() into one.
This simplifies and improves things considerably:
- We no longer need dummy pages.
- We no longer need vm_area::no_cache_change.
- #2710 is fixed, since we no longer hold the address space lock while
waiting.
* vm_soft_fault(): When we have found our page, we first check whether a page
is already mapped at the address. If it is already our page, we just change
its protection. If not, we unmap it first. Fixes race conditions when multiple
threads fault at the same address at the same time.
* fault_get_page(): When copying a read-only page from a lower cache, no longer
mark it active, since at least for the fault area it is shadowed from then on.
* vm_set_area_protection(): Fixed potential overflow for in the
vm_translation_map::protect() call.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30911 a95241bf-73f2-0310-859d-f6bbb57e9c96
gcc could apparently assume that the register assigned to the one in the
clobber list would keep its value (as can be observed when disassembling
add_debugger_command_etc()).
Using a dummy output register works around the problem and also avoids the
unnecessary initialization of the register.
Comments explaining the mystery welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30909 a95241bf-73f2-0310-859d-f6bbb57e9c96
allowing optional prepending of a string to the symbol names.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30750 a95241bf-73f2-0310-859d-f6bbb57e9c96
with vm_cache_acquire_locked_page_cache().
* Added new function vm_page_num_unused_pages() which returns the pages that are
actually completely free and unused.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30514 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a way to do asynchronous pre-fetching when mapping files.
* There are slight code duplications in some places that could benefit
from cleaning up, but nothing too bad.
* Implementing smarter ways to trigger prefetching and more analysis of
the situations in the kernel would be nice. Currently up to 10 MB
of every mapped file are pre-fetched without further analysis.
* The speed improvement is nice for certain operations. On our test
system (real hardware), Firefox took 9 seconds from being launched
to display a window. Now it takes 5 seconds. Both measurements
right after booting. The same system took 35 seconds from launching
Haiku in the GRUB menu to displaying the Tracker desktop background
image. Now it takes 27 seconds.
* We didn't have the chance to check out the effects of this on the
CD boot, but potentially, they could speed it up a lot.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30465 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Moved scheduler listening interface to <listeners.h> and added more
convenient to use templatized notification functions.
- Added a listener mechanism for the wait objects (semaphores, condition
variables, mutex, rw_lock).
* system profiler:
- Hopefully fixed locking issues related to notifying the profiler thread
for good. We still had an inconsistent locking order, since the scheduler
notification callbacks are invoked with the thread lock held and have to
acquire the object lock then, while the other callbacks acquired the object
lock first and as a side effect of ConditionVariable::NotifyOne() acquired
the thread lock. Now we make sure the object lock is the innermost lock.
- Track the number of dropped events due to a full buffer.
_user_system_profiler_next_buffer() returns this count now.
- When scheduling profiling events are requested also listen to wait objects
and generate the respective profiling events. We send those events lazily
and cache the infos to avoid resending an event for the same wait object.
- When starting profiling we do now generate "thread scheduled" events for
the already running threads.
- _user_system_profiler_start(): Check whether the parameters pointer is a
userland address at all.
- The system_profiler_team_added event does now also contain the team's name.
* Added a sem_get_name_unsafe() returning a semaphore's name. It is "unsafe",
since the caller has to ensure that the semaphore exists and continues to
exist as long as the returned name is used.
* Adjusted the "profile" and "scheduling_recorder" according to the system
profiling changes. The latter prints the number of dropped events, now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30345 a95241bf-73f2-0310-859d-f6bbb57e9c96
will return consistent values. This helps with debug measurements for the time
being. Obviously we'll have to think of something different when we support
speed-stepping on models with frequency-dependent TSCs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30287 a95241bf-73f2-0310-859d-f6bbb57e9c96
theoretically write the given page.
* page writer: Fixed the incorrect check whether a temporary page can be
written by using the new CanWritePage().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30281 a95241bf-73f2-0310-859d-f6bbb57e9c96
passed in a structure now, so it is easier to extend it and ignore unused
parameters.
* One can now select which system profiling events one is interested in.
* Added scheduling events to the system profiling interface. Those are pretty
much the ones recorded when scheduler tracing is enabled. Still missing are
the "wait object" events that allow to interpret what a thread is waiting
for.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30243 a95241bf-73f2-0310-859d-f6bbb57e9c96
methods that used an "event mask" field. There was no need to introduce
a "flags" field for the same purpose.
* Renamed protected DefaultNotificationService methods (removed "_" prefix).
* Adjusted the code providing a notification service accordingly.
* Changed the event message several notification services generated by renaming
the "opcode" field to "event".
* Implemented the TEAM_ADDED event and also added a TEAM_EXEC event.
* Added notifications for threads and images.
* Added visitor-like iteration functions for teams, threads, and images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@30126 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed DoublyLinkedList::Size() to Count(), since it actually counts the
items (ie. O(n)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29979 a95241bf-73f2-0310-859d-f6bbb57e9c96
* optimized unmapping of a single page that was rather inefficient
for large areas
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29978 a95241bf-73f2-0310-859d-f6bbb57e9c96
(mostly at least). Also disables -Werror for the binutils, but those should
be fixed eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29804 a95241bf-73f2-0310-859d-f6bbb57e9c96
device additions/removals can be monitored.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29582 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations that can be used by subsystems that want to have a pretty
standard service. Only the latter is really complete, though.
* The notification manager is now available earlier in the boot process.
* Added notifications to teams/ports (only add/remove).
* The network notification implementation is now using the
DefaultUserNotificationService.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29543 a95241bf-73f2-0310-859d-f6bbb57e9c96
can be checked.
* Make the usb_keyboard module check the presence of the needed debugger
commands to avoid the error messages in case of them being unavailable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29472 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The I/O context related vfs_*() functions have io_context* instead of void*
parameters/return values, now.
* vfs_new_io_context(): Lock the parent I/O context before getting its table
size. Otherwise the table size could change until we do.
* vfs_resize_fd_table(): Fixed use of MutexLocker. We created only a temporary
object, not one with function scope.
* Renamed load_image_etc() to load_image_internal() and added a parameter for
specifying the parent team of the one to create.
* Introduced a kernel private load_image_etc() with a few more arguments than
load_image().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29375 a95241bf-73f2-0310-859d-f6bbb57e9c96
stored now.
* Extended the debugger message for B_DEBUGGER_MESSAGE_HANDED_OVER by the
causing thread.
* Also send B_DEBUGGER_MESSAGE_HANDED_OVER to the debugger to which the team
was handed over. The message will be the very first one the debugger gets
from the team in question.
* Some harmless refactoring (added thread_hit_serious_debug_event()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29302 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugger commands to resolve usb_ids to pipes.
* Adjusted the physical memory allocator to be usable in a slimmed down mode
when running inside the kernel debugger.
* Implemented USB keyboard support for KDL through a kernel debugger add-on.
* Added kgetc() and made use of it where previously individual methods were used
to ensure that reading characters always goes through the kernel debugger
add-ons and the other methods.
This has some preconditions to meet though:
1) The keyboard must be in the boot protocol (currently the case but needs to
be revisited once we have a full usb_hid).
2) The keyboard must be attached to a UHCI root port (i.e. not use EHCI or OHCI,
also not through hubs unless those are USB 1.1).
3) the usb_hid driver has to be opened for this to work. This means that for the
time between initializing USB and when usb_hid is opened by the input_server
there is no keyboard support.
Also note that this has no way of detecting hot-plug, meaning that you can't
re-attach your USB keyboard from the hub to the root port once in KDL.
On the bright side of things, since this is a non-destructive mechanism it is
possible to enter and leave KDL without loosing the USB state.
Tested OK in QEMU, not tested on real hardware yet, will see in a few minutes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29291 a95241bf-73f2-0310-859d-f6bbb57e9c96
It causes the interrupt handler to be inserted at the very end of the list
instead of at the top. It is intended to be used as a workaround when a
interrupt handler cannot know if it actually handled the interrupt. This
should never be used by native drivers. Also if we know that the result is
not valid because of this flag we won't disable the vector in case we count
many unhandled interrupts as those numbers are then unreliable.
* Moved B_NO_LOCK_VECTOR to be a private flag as well.
* Made the interrupt handler list a simple manually maintaned singly linked list
instead of the doubly linked one used with insque and remque as it greatly
simplifies things for such an easy use case and is more compact.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Replaced the use of offsetof() for structs that aren't PODs. Add a
offset_of_member() macro to util/khash.h because that's what it's used for
in our cases.
* Change the signature of add_debugger_command()/remove_debugger_command() on
GCC > 2 to avoid the depricated conversion from string constants to char *.
* Adding some "suggested" parenthesis. I know that not everyone likes that, but
it pointed out at least one bug that is fixed here as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29113 a95241bf-73f2-0310-859d-f6bbb57e9c96
as public defines. They are now called THREAD_{MIN|MAX}_SET_PRIORITY to
better reflect what they are for. Minimum priority is now 1, ie. you no
longer can set another thread to the idle priority. This fixes part of
ticket #2959.
* set_thread_priority() will no longer allow to change the priority of the
idle thread to something else. This fixes the rest of ticket #2959.
* Automatic whitespace cleanup in OS.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28521 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new(mynothrow) operators which avoid clashes when also linking
against libgcc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28474 a95241bf-73f2-0310-859d-f6bbb57e9c96
- code is disabled yet as the bootloader doesn't have add_boot_item.. will need to pass via kernel args
- add a GetFileMap() method to the vfs, and implement it in FAT code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28445 a95241bf-73f2-0310-859d-f6bbb57e9c96
This is not necessary, since userland teams' page directories also
contain the kernel mappings, and avoids unnecessary TLB flushes. To make
that possible the vm_translation_map_arch_info objects are reference
counted now.
This optimization reduces the kernel time of the Haiku build on my
machine with SMP disabled a few percent, but interestingly the total
time decreases only marginally. Haven't tested with SMP yet, but for
full impact CPU affinity would be needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28287 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added deferred_delete() that takes a DeferredDeletable and deletes it
asynchronously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28285 a95241bf-73f2-0310-859d-f6bbb57e9c96
scheduler_set_thread_priority(). Setting the thread priority was the
only situation in which it was used.
* Renamed scheduler.cpp to scheduler_simple.cpp.
* The scheduler functions are no longer called directly. Instead there's
an operation vector now, which is initialized at kernel init time.
This allows for picking the most suitable scheduler for the machine
(e.g. a non-SMP scheduler on a non-SMP machine).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28262 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Turned the checks for all those macros to "#if"s instead of "#ifdef"s.
* Introduced macro KDEBUG_LEVEL which serves as a master setting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28248 a95241bf-73f2-0310-859d-f6bbb57e9c96
added vm_memcpy_from_physical() and vm_memcpy_physical_page(), and
added respective functions to the vm_translation_map operations. The
architecture specific implementation can now decide how to implement
them most efficiently. Added generic implementations that can be used,
though.
* Changed vm_{get,put}_physical_page(). The former no longer accepts
flags (the only flag PHYSICAL_PAGE_DONT_WAIT wasn't needed anymore).
Instead it returns an implementation-specific handle that has to be
passed to the latter. Added vm_{get,put}_physical_page_current_cpu()
and *_debug() variants, that work only for the current CPU,
respectively when in the kernel debugger. Also adjusted the
vm_translation_map operations accordingly.
* Made consequent use of the physical memory operations in the source
tree.
* Also adjusted the m68k and ppc implementations with respect to the
vm_translation_map operation changes, but they are probably broken,
nevertheless.
* For x86 the generic physical page mapper isn't used anymore. It is
suboptimal in any case. For systems with small memory it is too much
overhead, since one can just map the complete physical memory (that's
not done yet, though). For systems with large memory it counteracts
the VM strategy to reuse the least recently used pages. Since those
pages will most likely not be mapped by the page mapper anymore, it
will keep remapping chunks. This was also the reason why building
Haiku in Haiku was significantly faster with only 256 MB RAM (since
that much could be kept mapped all the time).
Now we're using a different strategy: We have small pools of virtual
page slots per CPU that are used for the physical page operations
(memset_physical(), memcpy_*_physical()) with CPU-pinned thread.
Furthermore we have four slots per translation map, which are used to
map page tables.
These changes speed up the Haiku image build in Haiku significantly. On
my Core2 Duo 2.2 GHz 2 GB machine about 40% to 20 min 40 s (KDEBUG
disabled, block cache debug disabled). Still more than factor 3 slower
than FreeBSD and Linux, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28244 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced flag "invoke_scheduler" in the per CPU structure. It is
evaluated in hardware_interrupt() (x86 only ATM).
* Introduced SMP_MSG_RESCHEDULE_IF_IDLE message, which enters the
scheduler when the CPU currently runs an idle thread.
* Don't do dprintf() "CPU x halted!" when handling a SMP_MSG_CPU_HALT
ICI message. It uses nested spinlocks and could thus potentially
deadlock itself (acquire_spinlock() processes ICI messages, so it
could already hold one of the locks). This is a pretty likely scenario
on machines with more than two CPUs, but is also possible when the
panic()ing thread holds the threads spinlock. Probably fixes#2572.
* Reworked the way the kernel debugger is entered and added a "cpu"
command that allows switching the CPU once in KDL. It is thus possible
to get a stack trace of the thread not on the panic()ing CPU.
* When a thread is added to the run queue, we do now check, if another
CPU is idle and ask it to reschedule, if it is. Before this change, the
CPU was continuing to idle until the quantum of the idle thread
expired. Speeds up the libbe.so build about 8% on my machine (haven't
tested the full Haiku image build yet).
* When spinlock debugging is enabled (DEBUG_SPINLOCKS) we also record
the spinlock acquirer on non-smp machines. Added "spinlock" debugger
command to get the info.
* Added debugger commands "ici" and "ici_message", printing info on
pending ICI message respectively on a given one.
* Process not only a single ICI message in acquire_spinlock() and other
places, but all pending ones.
* Also process ICI messages when waiting for a free one -- avoids a
potential deadlock.
* Mask out non-existing CPUs in send_multicast_ici(). panic() instead of
just returning when there's no target CPU left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28223 a95241bf-73f2-0310-859d-f6bbb57e9c96
used that handles NULL returns and doesn't expect an exception. This fixes that
certain constructors would still be called even if the allocation failed in low
memory situations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28208 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Add possibility to restart a complete pipe through B_KDEBUG_RESTART_PIPE.
* Implement tail in the kernel debugger making use of the former.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28154 a95241bf-73f2-0310-859d-f6bbb57e9c96
- initialize the time_base_frequency kernel arg (should be done in the bootloader though...). We will use MFP timer to support system_time(). At least try to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28098 a95241bf-73f2-0310-859d-f6bbb57e9c96
the methods IsFile() and GetFilePath() to BDiskDevice, and
BDiskDeviceRoster::GetFileDeviceForPath().
* Added new syscalls to implement this functionality.
* Added new flag B_DISK_DEVICE_IS_FILE.
* Fixed wrong operator precedence assumption in the BDiskDevice class at
several places.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28052 a95241bf-73f2-0310-859d-f6bbb57e9c96
- remove dead ppc code
- add support for probing hardware registers the way linux does (early, hook with VBR to trap faults)
- detect MFPs this way.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28031 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger add-on set a demangle hook, all modules under debugger/demangle/ are
now considered demangle modules.
* Added another function to the demangle module interface that gives you access
to the arguments.
* Implemented a demangling module for GCC2.
* The older demangling module is now called "gcc3+", but doesn't support
getting the arguments yet.
* The "call" KDL command is now using demangling to automatically show you
the arguments of a call from a stack crawl.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@28018 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use the new VMCache::Read() flags parameter to directly read into the
physical page in the page fault handler instead of mapping it first.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27966 a95241bf-73f2-0310-859d-f6bbb57e9c96
* memset() is now available through the commpage.
* CPU modules can provide a model-optimized memset().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27952 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_vm_aspace_swap().
* The x86 implementation does now maintain a bit mask per
vm_translation_map_arch_info indicating on which CPUs the address
space is active. This allows flush_tmap() to avoid ICI for user
address spaces when the team isn't currently running on any other CPU.
In this context ICI is relatively expensive, particularly since we map
most pages via vm_map_page() and therefore invoke flush_tmap() pretty
much for every single page.
This optimization speeds up a "hello world" compilation about 20% on
my machine (KDEBUG turned off, freshly booted), but interestingly it
has virtually no effect on the "-j2" haiku build time.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27912 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added smp_send_multicast_ici(), which sends the message to all CPUs
specified via a mask.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27910 a95241bf-73f2-0310-859d-f6bbb57e9c96
Currently it only contains KDEBUG and the block cache debugging macros.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27816 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer format, the buffer can now also contain other events than just
stack traces. ATM these are only references to the image events
(created/deleted). Therefore we no longer have to flush the profiling
buffer after such an event, since the debugger can exactly match the
samples. Since we couldn't flush when the profiling timer hit while the
thread was in the kernel, that wasn't working that well anyway.
"profile -f" fails to translate stack trace addresses only very rarely,
now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27775 a95241bf-73f2-0310-859d-f6bbb57e9c96
letting the boot loader provide full paths for the pre-loaded images.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27753 a95241bf-73f2-0310-859d-f6bbb57e9c96
been mounted, before anyone could try to load any modules from it.
Also pass it a flag whether the boot volume is where the boot loader
pre-loaded the modules from.
* module_init_post_boot_device() changes the pre-loaded module image
paths to normalized boot volume paths, now. Got rid of the code in
register_preloaded_module_image() which tried something like this.
* Changed module image ref counting. A referenced module has single
reference to its image, which is released when the module becomes
unreferenced.
* get_module() for a reference module will not try to re-get and re-set
the module's image anymore. That could lead to a similar module (from
different paths) being loaded at the same time. A module from a new
file can only be loaded when the old one has been put completely.
* Simplified B_KEEP_ALIVE module handling a bit. When the module is
initialized, we add another reference, which we'll never free. Thus
the module remains loaded without special handling. Removed
module_image::keep_loaded. A B_KEEP_ALIVE module remains referenced
and thus its image remains referenced, too.
* Removed module::file, a cached path to the module's image. An
optimization that wouldn't work with multiple root directories for
modules (/boot/beos/..., /boot/common/...) or when module files were
moved. get_module() does now always search the image file, when the
module is still unreferenced. This should be a bit slower than before,
but I didn't notice any difference in VMware at least. If it turns out
to be a problem we could introduce a more intelligent cache that stays
up to date by using node monitoring.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27752 a95241bf-73f2-0310-859d-f6bbb57e9c96
function (normalize_path()), now. There was some code duplication
before.
* Added "bool traverseLink" parameter to vfs_normalize_path(). When
true and the leaf component is a symlink, it will be resolved.
* KPath:
- Added similar leaf link traversal parameter to SetTo() and
SetPath().
- Added Normalize().
- Added DetachBuffer(), which returns the object's current buffer and
unsets itself.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27751 a95241bf-73f2-0310-859d-f6bbb57e9c96
elf_add_memory_image_symbol(). The former creates and registers a new
image that has not been loaded from a file. The latter adds a symbol to
its symbol table. This is mainly a debug feature, allowing to name code
or data in memory regions that aren't associated with loaded ELF
objects.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27721 a95241bf-73f2-0310-859d-f6bbb57e9c96
been called for a team, and fail installing the default debugger if it
is set. This makes disable_debugger() actually work. Fixes bug #2763.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27713 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended the profiling API by an option to record a variable number of
samples per tick. The stack depth is used as a maximum.
* Added new option "-f" to the "profile" tool. When specified it
increments the hit counts of all symbols in the full available caller
stack. I.e. the resulting hit counts will approximate the total time
spent in each function or any function directly or indirectly called
by it. Thus "_start" and "main" will usually get 100% and leaf
functions only what time has actually been spent in them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Relaxed the stack depth and profiling interval limits a bit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27697 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reduced the kernel_args array size from 32 to 16 (7 are used on a normal
build).
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27690 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed hash_remove_current(): It didn't update "lastElement" and thus
always also removed all elements in the same bucket preceding the one
to be removed. Also got rid of the useless "for" loop.
Fixes#2757.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27689 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adjusted used files systems accordingly.
* BFS::Stream::GetName() was broken. It accessed the small data region
which wasn't loaded, since BFS::Stream derived from bfs_inode, which
is a variably-sized structure with the small data region at the end.
Changed that to a ref-counted, shared member instead.
* Implemented RootFileSystem::GetName().
* Added Directory::GetPath() to get a full path of the directory or an
entry.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27664 a95241bf-73f2-0310-859d-f6bbb57e9c96
buffer during a timer event that interrupted a kernel function: We do
now flush the buffer as soon as it is 70% full, *if* we didn't interrupt
a kernel function. When the buffer runs full and we still haven't hit a
user function, we drop the tick. The number of dropped ticks is recorded
and sent to the debugger with the next update message.
Reverted the previous partial solution (the temporary disabling of
profiling while in debugger support code).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27658 a95241bf-73f2-0310-859d-f6bbb57e9c96
is created or deleted (or exec*() has been invoked). The counter is
sent with several debugger messages.
* Track the image event counter that is used when samples are added to
the profiling buffer. If the current team counter differs, we flush
the buffer first (sending an update message to the debugger), so that
the debugger has a chance to match the addresses to the correct images.
* Disable profiling for a thread while it runs in the debugger support
code. This fixes potential deadlocks which could occur when a
profiling timer event occurred that would require the buffer to be
flushed while the thread was just sending something to the debugger or
waiting for a command. As it turns out, this is not sufficient either,
since we should never try to flush the buffer when the timer event
occurred in the kernel, since the thread might hold a lock that the
debugger thread could try to acquire. Will implement a more general
solution later.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27656 a95241bf-73f2-0310-859d-f6bbb57e9c96
* We can't enable interrupts in an interrupt handler. Instead we use the
newly introduced callback feature, which notifies the debugger right
before returning from the interrupt.
* We didn't indicate that the profiling buffer was full and that the
thread shouldn't be profiled ATM. Therefore it could happen that it
was profiled while trying to notify the debugger that the profiling
buffer was full, resulting in a deadlock. Introduce a respective flag
in the thread debug structure.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27649 a95241bf-73f2-0310-859d-f6bbb57e9c96
interrupt handler and will be executed right before returning from the
interrupt.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27648 a95241bf-73f2-0310-859d-f6bbb57e9c96
be tracked to the kernel, which then counts the hits, an area is
passed to kernel in which the hits are recorded. When the area is
full, the debugger is notified. For some reason that part doesn't work
yet -- the whole system freezes when waiting for a reply.
* Reorganized the profile tool code a bit. For one with respect to the
changed API, but also to prepare tracking of image creation/deletion.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27640 a95241bf-73f2-0310-859d-f6bbb57e9c96
various system information.
* Implemented retrieving some VM stats via this call.
* The VM now maintains a page fault counter, and sets system_info::page_faults
accordingly.
* Added a (pretty simple) "vmstat" command line app.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27597 a95241bf-73f2-0310-859d-f6bbb57e9c96
VMware this doesn't produce very good results though. In my tests I only
got twice as many hits as with 1 ms, although it should be roughly ten
times as many. Might work better on real hardware.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27572 a95241bf-73f2-0310-859d-f6bbb57e9c96
still pretty much work in progress.
* Introduced init_thread_debug_info() which is used instead of
clear_thread_debug_info() when the thread is created. The latter
requires former initialization.
* user_debug_thread_deleted() is now already invoked in thread_exit(),
not in the undertaker.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27531 a95241bf-73f2-0310-859d-f6bbb57e9c96
many iframes are supposed to be skipped before recording the stack
trace. Currently implemented for x86 only.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27529 a95241bf-73f2-0310-859d-f6bbb57e9c96
When specified, the message is read but not removed from the port.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27527 a95241bf-73f2-0310-859d-f6bbb57e9c96
be used now. Tested only with VMware so far.
* apm_shutdown() is now called with interrupts turned on.
* Renamed arch_cpu.c to arch_cpu.cpp.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27404 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Imported radix bitmap tree implementation from FreeBSD and adjusted it
for Haiku.
* Make use of the radix tree in the swap support implementation instead
of using simple bitmaps. This will allow for faster swap slot
allocations. ATM Haiku doesn't benefit that much, since we always
allocate single pages, but that will change eventually.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27355 a95241bf-73f2-0310-859d-f6bbb57e9c96
unscheduled was incorrect.
* Introduced _kern_analyze_scheduling() syscall. It requires scheduler
kernel tracing to be enabled. It uses the tracing entries for a given
period of time to do a similar analysis the "scheduler" debugger
command does (i.e. number of runs, run time, latencies, preemption
times) for each thread. Additionally the analysis includes for each
thread how long the thread waited on each locking primitive in total.
* Added kernel tracing for the creation of semaphores and initialization
of condition variables, mutexes, and rw locks. The enabling macro is
SCHEDULING_ANALYSIS_TRACING. The only purpose is to provide
_kern_analyze_scheduling() with more info on the locking primitives
(the name in particular).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27304 a95241bf-73f2-0310-859d-f6bbb57e9c96
tracing buffer entries even when not in the kernel debugger.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27302 a95241bf-73f2-0310-859d-f6bbb57e9c96
for message queue
* Removed unnecessary header Vector.h
* Removed HasSemaphoreSet method: since there will be an IPC table for each
subsystem, if a key exist, it already has a semaphore set associated
with it
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27256 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented _kern_msgget()
Work in progress, some stuff may be removed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27254 a95241bf-73f2-0310-859d-f6bbb57e9c96
256 MB RAM, 1.5 GB swap, and "jam -j2", so it basically seems to do its
job alright.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27233 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implement color palette generation for the boot splash images in the
generate_boot_screen build tool. Only 4-bit screen support is missing now.
* Adopted images.h with the new results from generate_boot_screen.
This should fix black boot screens for graphics cards that don't support
true color modes for the native resolution. I've tried to find the ticket,
#2177 almost looks like the one, but it looks more like the mode is out
of range if I understand the ticket right.
Thanks a lot, David, and sorry it took so very long to apply your patch!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27223 a95241bf-73f2-0310-859d-f6bbb57e9c96
referencing iframe registers. Their prefix is "$". E.g. "$eax" refers to
the eax register of the current iframe. The features cooperates with the
"in_context" command, i.e. "in_context 92 $eip = 0" will set the eip
register of thread 92 to 0 (thus sealing its fate ;-)).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27192 a95241bf-73f2-0310-859d-f6bbb57e9c96
due to alignment padding before.
* Reorganized merging of caches a bit. Renamed MergeStore() to Merge()
and moved some more functionality into it. The method also moves the
pages from source to consumer, now. This is necessary, since
VMAnonymousCache needs to consider both physical pages and swap pages
at the same time. Before we first moved the physical pages and the
swap pages later, which was broken for two reasons: (1) A swap page in
the consumer cache shadows a physical page of the source cache, which
we ignored. (2) A source cache's physical page that also had a swap
page would lose the latter in the process when moved to the consumer
cache, i.e. if the page was not marked modified, it could be stolen
and its data would be lost.
These changes improve the situation when building Haiku with 256 MB RAM
in that jam doesn't crash anymore, but in my test the system became
totally unusable after about an hour or 7000 targets (GUI froze). For
some reason it didn't manage to free pages anymore although swapping
heavily.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27179 a95241bf-73f2-0310-859d-f6bbb57e9c96
PC of the innermost iframe.
* The "in_context" command does now set the currently debugged thread
respectively.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27166 a95241bf-73f2-0310-859d-f6bbb57e9c96
debugger and added respective getter/setter methods
debug_{get,set}_debugged_thread(). By default the currently debugged
thread is the thread that dropped into the kernel debugger, but commands
like "in_context" can change it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27164 a95241bf-73f2-0310-859d-f6bbb57e9c96
state_to_text().
* state_to_text() can now deal with a NULL thread argument.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27163 a95241bf-73f2-0310-859d-f6bbb57e9c96
first command line argument of a given command line string.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27155 a95241bf-73f2-0310-859d-f6bbb57e9c96
as they aren't unloaded when there is no boot device yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27136 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a second kernel daemon service, resource resizer, which is
mainly supposed to be used for resizing allocations asynchrounously.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27122 a95241bf-73f2-0310-859d-f6bbb57e9c96
create_area_etc().
* When the new flag CREATE_AREA_DONT_WAIT is specified, the functions
don't wait for memory or pages to become available. They fail
immediately instead.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27117 a95241bf-73f2-0310-859d-f6bbb57e9c96
of free objects an object cache should try to have ready. If the number
of free objects drops below the threshold, a new urgent priority thread
is asked to asynchronously resize the object cache (pretty similar to
the heap grower thread). Such a mechanism is necessary for code paths
that are supposed to free pages, but may need memory themselves (like
the swap support).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27100 a95241bf-73f2-0310-859d-f6bbb57e9c96
is enabled to set a per-heap get_caller() function.
* Added "-h <heap>" option to the "allocations_per_caller" command. If
given only the allocation for the specified heap are considered.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27097 a95241bf-73f2-0310-859d-f6bbb57e9c96
be passed on to the IORequest. Most relevantly physical pages can now
be written directly by passing B_PHYSICAL_IO_REQUEST.
* Added VMCache::WriteAsync() which is supposed to write pages
asynchronously. The base class version version falls back to the
synchronous Write(). Only VMVnodeCache implements WriteAsync() ATM,
VMAnonymousCache (swap support) still has to be adjusted accordingly.
* write_page() doesn't need to map the page anymore as it can write the
physical page directly.
* Modified the page writer to write pages asynchronously. This shouldn't
have any noticeable effect yet. It will though as soon as the I/O
scheduler reorders I/O operations.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27056 a95241bf-73f2-0310-859d-f6bbb57e9c96
writes the given page iovecs asynchronously. The new class
AsyncIOCallback is used to inform the caller when the request has been
finished.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@27055 a95241bf-73f2-0310-859d-f6bbb57e9c96
Ingo suggestions: instead of having one global sem_undo list,
we now have two local list, one per semaphore set and one per team
which is held in its xsi_sem_context structure, along with a mutex.
A mutex has also been added to the semaphore set class in order to
protect the local list, but also in order to (hopefully) improve
concurrency.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26993 a95241bf-73f2-0310-859d-f6bbb57e9c96
heap_class object now. Removed unused heap_allocator::heap_class.
* Made heap_class, heap_create_allocator(), heap_memalign(), heap_free()
public, so that a specialized allocator can be used elsewhere in the
kernel.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26965 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed TraceEntryIterator::Current(): If fEntry was NULL, it would
return 0x4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26955 a95241bf-73f2-0310-859d-f6bbb57e9c96
(fault address, pc, read/write) when a page fault occurs, and print them
in case this caused the termination of a debugger command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26949 a95241bf-73f2-0310-859d-f6bbb57e9c96
specifying the protection of each page (4 bits per page).
* Added no-op implementation of posix_madvise().
* Replaced a few "addr_t size" parameters by "size_t size".
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26871 a95241bf-73f2-0310-859d-f6bbb57e9c96
dedicated functions.
* Introduced gMappedPagesCount variable which counts the total number of
physical pages that are mapped.
* Added vm_page_get_stats() which fills in the memory related part of
the system_info structure. Used and cached pages are computed
differently, now. The "available" (== not committed) memory is no
longer used for the computation as it doesn't say anything about the
actually used/free pages (with swap support enabled it is even
less meaningful, since we first commit swap space when possible).
We do also consider the memory used by the block cache as cached
pages, now. All in all these changes should fix the memory statistics
reported by get_system_info(), IOW bug #2574.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26837 a95241bf-73f2-0310-859d-f6bbb57e9c96
include the guard pages. Adjusted the kernel and boot loader code
accordingly -- the guard pages size is added/not removed respectively.
The stack size passed to _kern_spawn_thread() is now the actually usable
size, and it is no longer possible to specify a size smaller than or
equal to the guard pages size.
* vm_create_anonymous_area(): Precommit two pages maximum -- a stack with
only one page usable size obviously doesn't need two pages.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26819 a95241bf-73f2-0310-859d-f6bbb57e9c96
now a lot earlier.
* That makes it now possible to use modules pretty early in the kernel (like
before timer_init(), or int_init_post_vm()).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26790 a95241bf-73f2-0310-859d-f6bbb57e9c96
and size of the double fault stack.
* is_kernel_stack_address() does now also check whether the given
address is on the double fault stack. This fixes stack traces on
double faults, which were broken (i.e. went only to the double fault
iframe) since we started checking whether the addresses are on the
kernel stack at all.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26775 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Dumping the features as string is now a one time thing, that only happens
when DUMP_FEATURE_STRING is defined to 1.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26733 a95241bf-73f2-0310-859d-f6bbb57e9c96
gTeamSpinlock.
* Renamed the static global variables in smp.c to match our style guide.
* Minor other cleanup.
* Removed superfluous white space.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26730 a95241bf-73f2-0310-859d-f6bbb57e9c96
- Fixed deadlock in xsi_sem_undo - RecordUndo
- Fixed issue in xsi_sem_undo: if the semaphore set does not exist
anymore, ignore the request but do remove the process from the sUndoList,
which wasn't previously done.
- free() in ClearUndos was called with interrupts disabled
- when a semaphore set ends to exist, remove all it's sem_undo request as it's ID
will be reused in the future.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26727 a95241bf-73f2-0310-859d-f6bbb57e9c96
partially (e.g. due to hitting the end of file). The respective
classes have grown new methods and attributes to deal with that. The
"finished" callbacks have got additional parameters to indicate
whether the transfer was only partial and how much has been
transferred. Other callbacks and functions have a size_t* in/out
parameter instead of a simple size_t, now.
* vfs_{read,write}_pages() do now use the I/O request framework instead
of the underlying FS's {read,write}_pages() hooks (those should be
unused now). Furthermore they've got an additional "flags" parameter,
which is passed to IORequest::Init(), i.e. it allows to specify that
the given vecs refer to physical addresses.
* The file cache's read_into_cache() reads directly into physical
pages, now.
* Fixed bug in DoIO::IO(): The offset was not adjusted, so that all
pages were incorrectly transferred from/to the same location.
* Fixed broken subrequest scheduling loop head in
do_iterative_fd_io_iterate().
* Adjusted the test driver and implemented its io() hook. Using this
driver I/O requests are passed all the way from the VFS/VM to the
driver and through the I/O scheduler. It even seems to work. :-)
* Added missing const to the iovec* parameter of the IORequest::Init()
methods.
* Disabled some debug output by default. Added new optional debug
output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26692 a95241bf-73f2-0310-859d-f6bbb57e9c96
is defined to 1; this allows asserting the read lock case, too.
* Added ASSERT_{READ|WRITE}_LOCKED_RW_LOCK() macros. The read assertion is only
working when KDEBUG_RW_LOCK_DEBUG is defined to 1, the write assertion works
always.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26686 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added "syslog" command that dumps the contents of the syslog ring buffer into
KDL. Use the '-n' option to only show what hasn't been sent to the syslog
daemon yet.
* When entering the kernel debugger, the current thread ID and name are also
printed (not only the current CPU).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26684 a95241bf-73f2-0310-859d-f6bbb57e9c96
by myself:
* renamed xsi_do_undo() to xsi_sem_undo() (there is more to XSI than sems).
* Fixed coding style issues in sys/sem.h and xsi_sem.cpp.
* Added _kern_*() syscall prototypes to syscalls.h.
* Added a TODO in xsi_sem.cpp and xsi_semaphore.h about moving union semun to
a shared header.
* Made the team::xsi_sem_undo_requests int32 - due to padding, it would have
needed 4 bytes anyway; please always use specific types over int/short/long.
* xsi_sem_undo() now checks if it needs to do anything - the calls in team.cpp
no longer needs to do this.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26676 a95241bf-73f2-0310-859d-f6bbb57e9c96
vnode (falling back to synchronous I/O if the io() is not supported).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26672 a95241bf-73f2-0310-859d-f6bbb57e9c96
to provide asynchrounous (or only synchronous, if asynchronous is not
supported) I/O request support. It will eventually replace
{read,write}_pages(). None of the FS implementations implement them
yet.
* Implemented some support functions for request-based I/O. File system
implementations can use do_fd_io() which passes an I/O request to the
layer responsible for a given FD, and do_iterative_fd_io(), which
translates a request for a file to subrequests for the underlying
device and passes them on. Both fall back to synchrounous processing
when the io() hook is not supported.
Furthermore added vfs_synchronous_io() which should be handy for the
devfs to perform io_requests synchronously for devices that don't
support the io() hook.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@26655 a95241bf-73f2-0310-859d-f6bbb57e9c96