..
ad1848reg.h
add support for cs4231
1995-07-07 02:11:45 +00:00
aic7xxx.c
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
aic7xxxreg.h
dev/microcode/aic7xxx/aic7xxx.seq,
1996-10-08 03:04:02 +00:00
aic7xxxvar.h
Implement a simple scsi xfer queue to avoid presenting a resource
1996-12-02 19:06:41 +00:00
aic6360.c
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
am7930.c
Comply with recent autoconfiguration changes. Diffs graciously
1996-12-10 22:54:46 +00:00
am7930reg.h
AMD9730 telephony chip (used to be sparc/dev/bsd_audioreg.h).
1995-04-24 19:17:17 +00:00
am7930var.h
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
am7990.c
Deal with Lance memory size 132KB (sparc `lebuffer' devices use this size).
1996-12-06 21:54:00 +00:00
am7990reg.h
LANCE register definitions, plus some utility macros for the machine-
1995-04-11 04:17:50 +00:00
am7990var.h
fix alignment again for m68k
1997-01-15 18:22:35 +00:00
bha.c
Remove a previous gratuitous change, and KNF police.
1997-01-17 22:09:09 +00:00
bhareg.h
typo in definition of extended-geometry register.
1997-01-04 16:47:03 +00:00
bhavar.h
Deal with targets > 7 on wide Buslogic controllers. Remember the "wide"
1996-12-20 21:35:10 +00:00
cd1400reg.h
New Cyclades driver from Timo Rossi
1996-09-24 18:02:33 +00:00
com.c
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
comreg.h
Wrap the definitions of CONADDR and CONUNIT in #ifndef.
1996-09-06 05:06:01 +00:00
comvar.h
move cominit() prototype to comvar.h, so that ports which use 'com'
1996-11-13 19:41:35 +00:00
cs4231reg.h
Remove incorrect comment. From Mike Long, PR 1277.
1996-02-16 08:12:33 +00:00
cy.c
New bus.h implementation/interface:
1996-10-21 22:24:37 +00:00
cyreg.h
New Cyclades driver from Timo Rossi
1996-09-24 18:02:33 +00:00
cyvar.h
New bus.h implementation/interface:
1996-10-21 22:24:37 +00:00
dc21040reg.h
Merge into mainline, tidy up some debug code.
1997-01-11 04:47:31 +00:00
dp8390reg.h
Take endianness into account in ed_ring.
1995-04-12 16:12:42 +00:00
elink3.c
Use DELAY() after doing a TX_RESET or RX_RESET command.
1996-12-31 21:36:30 +00:00
elink3reg.h
* make sure 100mbit media-present bits don't collied with 3c509
1996-12-30 19:18:28 +00:00
elink3var.h
* make sure 100mbit media-present bits don't collied with 3c509
1996-12-30 19:18:28 +00:00
hayespreg.h
Hayes ESP register definition
1996-02-10 20:23:40 +00:00
i8042reg.h
Add constants for some keyboard controller commands.
1995-04-21 09:16:16 +00:00
i8237reg.h
Add bit definition for auto-initialize mode.
1996-03-01 22:27:09 +00:00
i8253reg.h
new RCS ID format.
1994-10-27 04:14:23 +00:00
i82586reg.h
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
i82595reg.h
Add "iy" driver for Ethernet ISA boards using the Intel i82595 chip, e.g.
1996-05-06 21:36:51 +00:00
ics2101reg.h
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
lpt.c
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
1996-12-05 01:25:23 +00:00
lptreg.h
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
1996-11-23 23:22:50 +00:00
lptvar.h
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
1996-12-05 01:25:23 +00:00
mb86960.c
Appease the compiler: get rid of some unused variables, add some
1996-10-17 04:34:08 +00:00
mb86960reg.h
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
1995-05-01 02:47:07 +00:00
mb86960var.h
Appease the compiler: get rid of some unused variables, add some
1996-10-17 04:34:08 +00:00
mc146818reg.h
machine-independent definitions for the Motorola MC146818A Real Time Clock
1995-05-04 19:31:18 +00:00
midway.c
bug fix:
1997-01-24 20:58:42 +00:00
midwayreg.h
New bus.h implementation/interface:
1996-10-21 22:24:37 +00:00
midwayvar.h
New bus.h implementation/interface:
1996-10-21 22:24:37 +00:00
ncr5380.doc
Switch to David Jones' new machine-independent NCR5380 driver. It's been
1996-01-01 22:24:30 +00:00
ncr5380reg.h
Switch to David Jones' new machine-independent NCR5380 driver. It's been
1996-01-01 22:24:30 +00:00
ncr5380sbc.c
Make this compile #ifdef DDB:
1996-12-15 10:02:30 +00:00
ncr5380var.h
Add a new member to the softc (sc_parity_disable) with per-target
1996-05-10 18:04:01 +00:00
nec765reg.h
Correct NE7CMD_FORMAT command (from John Kohl; PR#1637).
1995-10-20 00:02:20 +00:00
ns16450reg.h
new RCS ID format.
1994-10-27 04:14:23 +00:00
ns16550reg.h
new RCS ID format.
1994-10-27 04:14:23 +00:00
pdq.c
backout kprintf changes
1996-10-13 01:37:04 +00:00
pdq_ifsubr.c
Fix conflicts during import.
1996-05-20 00:26:15 +00:00
pdqreg.h
define PDQ_ASSERT directly in terms of __assert, because cpp doesn't seem
1996-08-28 16:01:29 +00:00
pdqvar.h
update alpha_XXX_dmamap() invocations to match prototype.
1996-10-25 21:33:30 +00:00
smc90cx6.c
backout kprintf changes
1996-10-13 01:37:04 +00:00
smc90cx6reg.h
update from Ignatios Souvatzis
1995-06-07 00:13:52 +00:00
smc93cx6.c
New bus.h implementation/interface:
1996-10-21 22:34:38 +00:00
smc93cx6var.h
New bus.h implementation/interface:
1996-10-21 22:34:38 +00:00
uha.c
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
uhareg.h
Minor changes.
1996-09-01 00:54:34 +00:00
uhavar.h
New bus.h implementation/interface:
1996-10-21 22:34:38 +00:00
wdcreg.h
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
z8530.doc
Reorganized, machine-independent z8530 driver, based on the sparc/sun3 zs.
1996-01-24 01:07:21 +00:00
z8530reg.h
Add ZSWR1_IMASK (all intr. enable bits in WR1)
1996-12-13 21:02:39 +00:00
z8530sc.c
New version of the z8530 driver that should permit the mac68k port
1996-12-17 20:42:40 +00:00
z8530sc.h
New version of the z8530 driver that should permit the mac68k port
1996-12-17 20:42:40 +00:00
z8530tty.c
New version of the z8530 driver that should permit the mac68k port
1996-12-17 20:42:40 +00:00