due to its similarities.
Patch has been tested by many people on the sgimips list for some time with
no complaints.
Contributed by: Christopher SEKIYA <wileyc@rezrov.net>
- Full support for SCSI-2 Tagged commands (enabled by default)
- Implement save and restore datapointer messages
- Formalize interface between MI and MD drivers.
- decouple interface between MD driver and DMA routines
- Use scsipi layer where appropriate (Tags, Sync Negotiations etc)
- control blocks stored using kernel pool(9) functions
- evcnt(9) compliant counters
- Enable advanced features on later WD33c93 chips.
(Identify message out phase is hardware assisted)
- Improved timeout support (one per active control block)
- Improved MESG_IN and MESG_OUT handling
- Start to tidy up debugging output
- Numerous bug fixes and cleanups throughout
Changes are based largely on the NCR53c9x MI driver for ideas on
how to DTRT.
string, if present, will override the second argument (which may be the
path/kernel being loaded). This will provide a way to netboot the kernel
and allow the root device be set to a disk partition.
line parameters, and device_register() to try to match the boot device. Works
on a Challenge S (and similar machines), but will need more work for other
SCSI adapters.
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
this file; while I'm here, rework the GIO arbitrator parameter setup to
match more closely what is done by lunix on the same hardware... Finally,
on a tip from Wilbern Cobb, preserve the graphics-related bits of the
GIO arbitrator parameter register from the PROM-initialized settings so
ARCS console on the graphics display works (tested on both my Indy with
Newport and my Indigo2 with XL gfx).
Based on mvme68k and Atari drivers for the same chipset with the
addition of bus_space support. Attempts have been made to seperate out the
machine dependent dma components and more work is required in this area.
Tested on SGI R4K Indy, but has little testing on other platforms.
interrupt, use platform.ticks_per_hz instead of hardcoded constant for the
counter increment (XX: not that the ticks_per_hz is calculated for the IP32
yet).
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
all splsoftxxx() calls block soft interrupt 1 and make spllowersoftclock()
re-enable soft interrupt 1.
XXX: This needs to be reworked so that spllowersoftclock() only turns on
softclock interrupts, not all soft interrupt. That change is coming soon.
interrupts as well. The system is quite stable now that soft interrupts
don't pop up at random places where they're unexpected 8-)
Also, while here, fix CPU clock speed calculation for the Indy.
features).
- Implement crude multicast support -- enable reception of all multicast
frames if we have any addresses on the multicast list. TODO: use the
64-bit hash table on the 80c03.
- Implement promiscuous mode.
IPv6 doesn't quite work yet -- DAD finds a duplicate for the
link-local. The 8003 hears its own transmissions, but IFF_SIMPLEX
is not set, so I'm a little confused.
like that, and it has no effect on the Indigo2.
From Christopher SEKIYA <wileyc@rezrov.net>.
Also, query the "ConsoleOut" ARCS variable (i.e. "what the console
really is") rather than "console" ("what the console is configured
as").
sync'ing the descriptor, leading to a race where the packet could complete
after the DMA check but before the sync of the descriptor, sending the code
into unknown territory and the DMA engine into space. Also, fix a bug with
spurious watchdog resets going off due to the if_timer not always being set
on transmit.
Finally, clean up use of hardcoded magic numbers, get them from hpcreg.h
when possible.
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).
These calls are relatively conservative. It may be possible to
optimize these a little more.
calling pmap_steal_memory() directly. On these platforms, since
uvm_pageboot_alloc() is a wrapper around pmap_steal_memory(), there
is no functional change. This is merely for API consistency.
and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
with a MIPS4 option at this point -- all the code except for one single
spot is conditionalized with MIPS3. So, don't even pretend about
MIPS4 for now, until it all gets cleaned up.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
