with full pathname lookups if a public filehandle is used, and that
it translates the '%' escapes (URL-style) in the same case. Also,
make nfsrv_fhtovp convert the public filehandle to the vp of the
publicly exported filesystem, as stored in the nfs_pub structure.
a request on the public filehandle. Extend the lookup operation to
support WebNFS, including index file support (URL style). Yucky, it's
optional in the spec, but Solaris 2.6 will support it, so..
- Disallow < 1 values for SO_SNDBUF, SO_RCVBUF, SO_SNDLOWAT, and
SO_RCVLOWAT; return EINVAL if the user attempts to set <= 0.
Inspired by PR #3770, from Havard Eidnes <he@vader.runit.sintef.no>.
- For SO_SNDLOWAT and SO_RCVLOWAT, don't let the low-water mark get
set above the high-water mark. Behavior is now consistent with
BSD/OS: If such an attempt is made, silently truncate to the high-water
value.
use of mbuf external storage and increasing performance (by eliminating
an m_pullup() for clusters in the IP reassembly code).
Changes from Koji Imada <koji@math.human.nagoya-u.ac.jp>, in PR #3628
and #3480, with ever-so-slight integration changes by me.
- If the partition is already open, skip the open/close step. (Sync with
other disk drivers).
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
- If the partition is already open, skip the open/close step. (Sync
with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
- Pass correct arguments to ofdopen() and ofdclose().
- If the partition was previously open, don't do the open/close steps.
(Sync with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
newly-exec()ed user-land process for the new dl*-capable crt0:
a0 stack pointer (points to onstack argc)
a1 rtld cleanup (filled in by dynamic loader)
a2 rtld object (filled in by dynamic loader)
a3 ps_strings
From Jason Thorpe (thorpej@nas.nasa.gov).
ktlbmiss on the kernel stack. It was showing the temporary SP, not the
original SP.
Add a display of the first few wired entries of the TLB so when the ktblmiss
occurs, the TLB entries mapping the kernel stack can be verified.
greater flexibility in its use. Additionally, add support for "geometry
emulation". This allows the "geometry" of the "disk" to be specified
at config time, providing near-perfect emulation of disklabel-less floppies,
CD-ROMs, etc., including non-512-byte sectors. If a geometry is not
specified at config time, a default based on 1M cylinders will be used.
clock rate for this board on Alpha/PCI systems. Under x86/PCI, the
board f/w will correctly tell you "I'm running at 60Mhz", so the code
that preserved that across a board reset (which would drop the chip
back to 40Mhz) worked fine. On the 8200, the chip was saying "I'm 40Mhz"-
which wasn't true. This turned out to be okay as long as you didn't have
any FAST or UltraFast targets- In fact, setting the chip to 40Mhz allowed
you to run up to 8Mhz SCSI. Unfortunately you die bigtime on the devices
that go faster than that. The fix here is to only use what the chip tells
you the clock rate is in the cases you don't really know (sbus is the
only case where this could be different, although with 66Mhz PCI coming up,
this may change).
* cpuregs.h:
rename remaining VMMACH_xxx TLB macros to MIPS_TLB_xxx.
Add compile-time MIPS3-only, compile-time MIPS1-only, and
runtime (both) definitions for number of TLB ASIDs (tlb pids)
and shift count to extract a TLB pid.
* locore.h:
Delete unused vector slot for indexed TLB writes.
mips1 and mips3 TLBs are different enough that we have
to break them out at the caller anyway.
* Add compile-time MIPS3-only andcompile-time MIPS1-only
macros to call locore functions directly by name.
Use the existing method table only if
* mips/mips_machdep.c, mips/trap.c, mips/pmap.c, pmax/machdep.c:
Use MIPS3_ or MIPS1_ specific names for TLB pids in
mips3 and mips1 specific code paths (e.g., creating the kernel stack
for process 0).
Add `options MIPS3' to pmax/conf/GENERIC.
Remove unused debug procedure I forgot to remove previously.
Consolidate the vm_page_free1() calls in pmap_release(). Duplicate code
was a result of the way I merged the MIPS3 support from the pica pmap.c.
Enhance the comment on flushing the cache when releasing the segmap pages,
and add a comment about the currently unused code to uncache pages in
pmap_enter_pv().
unsigned cause register wouldn't have worked.
Add missing ')' in trapdump that shows up when compiled with DEBUG.
Fix (unfix?) previous change to printf formats in mips3_dump_tlb: vad_to_pfn
is now consistant with single-CPU and merged-CPU support.
* cpuregs.h:
Delete unused VMMACH_ names (e.g., duplicates of PTE bits in pte.h).
Change remaining VMMACH_xxx names to MIPS1_xxx or MIPS3_xx.
Fold remaining compile-time definitions into a single #ifdef MIPS3.
* Use MIPS1_ names in locore_r2000.S, mips3_ names in locore_r4000.S
* Garbage-collect MachHitFlushDCache()
* psl.h:
use MIPS1_, MIPS3_ symbolic names for Cause register bits.
change _R3K to MIPS1_, _R4K to MIPS3. Conditionalize for mips1 only,
mips3 only, or when both are defined, use runtime CPUISMIPS3 test.
now be installed on any partition.
Allow PRIM_LOADSZ to be set in the Makefile.
This together allows to make bootable 720k floppys.
closes PR port-i386/3751
Remove cpu-specific routines from locore.S and add them to locore_r2000.S
and locore_r4000.S. Add entries in locore jump vector table for switch_exit()
and the cpu_switch() context resume.
Add offsets into the jump vector to genassym.cf for use in locore.S.
Remove cpu-specific routines from locore.S and add them to locore_r2000.S
and locore_r4000.S. Add entries in locore jump vector table for switch_exit()
and the cpu_switch() context resume.
Add offsets into the jump vector to genassym.cf for use in locore.S.
Use same cachesize variables for mips1 and mips3, and rename the variables
per Jonathan's request.
the stack frame when usermode interrupt occurs. The interrupt may have
modified the PC [such as sendsig()]. This got dropped with the stackframe
changes.
call for the board's memory space to be PCI_MAPREG_MEM_TYPE_32BIT_1M or
PCI_MAPREG_MEM_TYPE_32BIT depending on the board ID. Also, remove a
bogus extra argument to an interrupt-establishment-error printf. Problems
pointed out by Jarkko Torppa <torppa@cute.fi> in PR 3753, but fixed slightly
differently than he suggested.
(1) fix a printf format (%x to print int, not %lx).
(2) fix probe of 4th chip/16th channel (used to tell whether or not the
board is a 16- or 32-port board) by removing an incorrect offset so
that the code matched its comments. (!!!)
(3) fix storage of chip number in per-channel structure so that it actually
stores the chip number, rather than the chip offset. This allows the
driver to work with more than the first four channels (i.e. with chips
other than chip number 0, which happens to have an offset of zero). (!!!)
Remove old code now that the new version is working.
Correct typo for 16K cache (R4400).
Align the saved AT register location; seems to hang if not aligned on 8
byte boundry.
similar design and code by Jason Thorpe and Jonathan Stone.
NOTE: the kernel-stack-switching code and cacheflush() calls in
locore.S still use #ifdef MIPS3 and need more work.
mips/include/cpu.h:
Add CPUISMIPS3 for run-time tests of what CPU architecture level
we're running on.
mips/include/locore.h:
Add declarations of locore cache-size variables for ref/def toolchain.
mips/include/mips1_pte.h:
mips1 TLB bit definitions.
mips/include/mips3_pte.h:
mips3 TLB bit definitions.
mips/include/pte.h:
define accesor macros for TLB bits (e.g., mips_pg_m_bit(),
that expand to CPU constants if only one CPU arch is configured,
or to inline functions if both MIPS1 and MIPS3 are configured.
mips/mips/locore_r2000.S:
Use MIPS1_PG_xxx constants inside mips1-specific code.
mips/mips/locore_r4000.S:
Use MIPS3_PG_xxx constants inside mips3-specific code.
mips/mips/locore.S:
Use MIPS1_PG_xxx constants inside mips3-specific code.
Use MIPS1_PG_xxx constants inside mips1-specific code.
(Needs more work!)
mips/mips/{pmap.c,vm_machdep.c,trap.c}, pmax/pmax/machdep.c:
Use MIPS3_PG_xxx constants inside mips3-specific functions,
and MIPS1_PG_XXX inside mips1-specific code.
Otherwise, use mips_pg_XXX_bit() macros where they apply,
and use "if (CPUISMIPS3) { ... } else {... }" where they don't.
mips/mips/mips_machdep.c:
Import Michael Hitch's fixes from the pmax locore-init code
into mips_vector_init().
pmax/pmax/machdep.c:
Use generic mips_vector_init() locore vector-init function.
an 68060/68LC060, possibly switching on the 68060 FPU, instead of trusting
the value passed from the ROM OS to us by the bootblock.
Most 68060 boards, unlike the DraCo (which seems to have heavily patched OS
ROMs) don't set the AMIGA_68060 flag; instead, upon detecting an 68060, its
FPU is disabled to make the ROM scheduler work, and at a much later time (at
least, later than bootblock booting time), the "68060.library" installs the
Motorola 68060 software support, patches the scheduler for the 68060 FPU, and
re-enables the FPU.
Maybe this will be fixed one day, if Amiga International sells upgraded OS
ROMs which know about the 68060. Until then, and for legacy machines, this
kludge is needed if we want to boot a non-DraCo 68060.
Btw, thats why this is NOT in std.amiga, but in GENERIC; the DRACO
configuration doesn't need it (and I still plan to make std.draco go away).
- It was incorrect. A dev_t should _never_ be compared against
NULL, as 0 is a valid value (major 0, minor 0).
- The operator mave have _intentionally_ set dumpdev to "none"
(i.e. NODEV), and setting it the first time a VBLK swap device
is added would break the semantics.
setroot() deals with all dump device selection. Dumps and swap are now
in no way related.
* Finish new ARP (struct ethercom) changes.
Some references to sc_ac were left danglnig.
* Include if_dl.h and if_media.h.
* Delint printf() messages: int vs. long , int vs. pointer.
* Delete unused variables.
* add prototypes to <dma.h> for the per-device dma-setup functions.
* MachEmptyWriteBuffer() -> wbflush(). Also #include <bus.h>,
so that wbflush() expants to the locore callback vector entrypoint.
Move mips-specific pmap definitions (PMAP_PREFER for mips3, declaratin
of pmap_bootstrap() for the system-specific machdep.c) from
arch/pmax/include/pmap.h to arch/mips/include/pmap.h.
* rewrite findroot() based on NetBSD 1.2F i386 findoot().
* Rewrite makebootdev() to use struct devnametodevmaj pica_nam2blk[].
Previous changes changed the `devname' char array and findroot()
bot not makebootdev().
* Add prototypes, delint for gcc -Wall.
* Move declaration of locore communcation variables (CPU family,
cache sizes, etc) to mips/include/locore.h. Delete from
pmax/include/cpu.h and older versions from pica/include/cpu.h.
* Move definitions of CLKF_BASEPRI, CLKF_USERMODE to mips/include/cpu.
* Delete duplicate definitions in pica/include/cpu.h, pmax/include/cpu.h.
Change pmax/include/psl.h to just do #include <mips/psl.h>.
pmax/include/psl.h would go away completely if it wasn't stil required
by compat/common/kern_exit_43.c.
Simplify the way transmit buffers are managed, remove assumptions about
NBPG, simplify sonic_get handling, update snioctl to be more like other
current drivers, and probably a few other changes I've now forgotten about.
or swap partitions. Booting from a miniroot on the swap partition will
detect the miniroot as the boot partition (if the bootblock loader passes
the boot partition offset to the kernel).
processing from generic trap processing, _FORKBRAINDAMAGE is gone -
user process entered through proc_trampoline(), mini-debugger from pica
port.
More merged MIPS1/MIPS3 support for DECstations.
proc_trampoline(); move away from UADDR access to user structure.
From Toru Nishimura: exception trapframe changes, mini-debugger from pica
port, separate out syscall exception.
DECstation MIPS3 support: wbflush() is cpu-dependent, MIPS3 level 2 cache
support.
(thesing@cs.uni-sb.de), heavily hacked upon by me to
- make it work with -current audio system
- make it shut off Amiga audio DMA only at appropriate places.
XXX A couple of bugs still remain, which well be handled later.
XXX Among them: only mono output; doesn't refuse to handle input, but chokes;
will not play last millichunk (is this 20 ms?) of data.
bounce buffer, which breaks installs on 4Meg machines using the new
ramdisk install system. We'll bus_dma the driver and then it should be
fine to put back in to the normal INSTALL kernel.
- If RB_ASKNAME, prompt for the dump device, defaulting to
partition 'b' of the root device, if the root device is a disk.
- Else, if dumpspec is set to "none", do not configure a dump device.
- Else, if dumpspec is set by config(8), attempt to use that device.
- Else, dumpspec is wildcarded or unspecified; if the root device is
a disk, select partition b. (which was the previous default dump
partition)
Note, dumps to a local disk now work even if root is on nfs.
XMS is recognized and used as temporary buffer for the kernel image.
The processor must still be in real mode at program start, so EMM386
or QEMM are not allowed. W*95 is OK.
Written by Martin Husemann (pr port-i386/3336).
Completely separated from other bootloaders for sanity.
mycroft