f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
6fe0de17c6
Fixup copyright.
2000-05-28 07:18:58 +00:00
4ba1e04ba2
Handle ADEV_CDROM in quirks table.
...
Quirk entry for another Toshiba cdrom.
2000-05-28 07:03:59 +00:00
57e5e86ed1
Merge pmax and alpha ISDN register definitions.
2000-05-28 06:13:40 +00:00
f329fb84ad
We need to be slightly more clever during auto-configuration, to make
...
sure that we a) don't ignore components with correct mod-counters, and
b) do ignore components with bogus mod-counters.
2000-05-28 05:23:41 +00:00
1ddfaaf8fa
Umm.. Complete is not equal to 'left to do'. Fix the math.
2000-05-28 03:42:23 +00:00
e38b4355e2
Abort any parity re-writes before unconfiguring a RAID set.
...
Partially addresses PR#10182.
2000-05-28 03:00:31 +00:00
2864a7186a
reclaim transmitted packets on receive interrupts.
2000-05-28 01:28:52 +00:00
228570e110
When setting auto-config/rootable bits, only try to update the
...
component label if the component is actually alive.
2000-05-28 01:03:22 +00:00
1aaf6772f1
- Add a mechanism for obtaining finer-grained 'progress' information
...
regarding reconstructs, copybacks, etc.
- RAID 0 doesn't do copybacks, but don't make raidctl sweat about it.
2000-05-28 00:48:30 +00:00
3713246e34
Don't bother searching the qinfifo for SCBs to requeue in the BUSY
...
and QUEUE FULL cases; this is already done for all BAD_STATUS cases.
Make sure to requeue the SCB in the above cases internally in the driver,
the SCSI layer doesn't know how to deal with it properly.
2000-05-28 00:19:59 +00:00
cb5289547f
At least try to do something useful in the XS_BUSY case; don't cause
...
a panic by sleeping in an interrupt context.
2000-05-27 23:59:58 +00:00
4b7b35ae8a
When a bus is accessed for the first time, reset it. Without this,
...
some devices may not be found if the BIOS (which would normally
do the reset at startup) is disabled. Should really be done from the SCSI
layer.
Implement the SCBUSIORESET ioctl.
2000-05-27 21:58:15 +00:00
26b4598736
Components which match on everything but the mod_counter are
...
renegades, and must be handled correctly. In particular, they should
be added to their old auto-config set, but then immediately released.
Failing to do otherwise means that they potentialy end up in a
different (and competing!) RAID set which may auto-configure in place
of the correct one, and cause all sorts of chaos at auto-configure
time.
2000-05-27 20:29:14 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
e9b5b7aa5e
Add a comment to clarify why we actually want the component label to
...
be considered a 'match' even if the mod_counter is wrong.
2000-05-27 19:12:03 +00:00
39c7c9aff6
Change AdwInitCarriers in adwmcode.c
...
Add new AdwInitCarriers prototype in adwmcode.h
All of the supported adapters are now initialized calling a unique common
function
2000-05-27 18:24:50 +00:00
d2b2ed0970
Checking parity re-write status makes no sense on RAID 0, but let's
...
return something reasonable anyway.
2000-05-27 18:23:27 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
e42c2ac5fb
Ops, state should be RESET, not RECAL here.
2000-05-27 16:11:16 +00:00
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
21fc65e1a8
sleep() -> tsleep()
2000-05-27 04:52:27 +00:00
d0a8b751b2
Don't use sleep() and a callout; just use tsleep().
2000-05-27 04:46:24 +00:00
dd266dbb2f
Fix counting of output packets. Only count descriptors with TDES_LS set.
...
Also make transmit timeout logic more correct.
2000-05-27 04:26:32 +00:00
7ae8c684a8
Increase delay on EEPROM access.
...
CATS sometimes cannot read MAC address correctly.
2000-05-27 00:55:42 +00:00
38d5764cd1
Fix for a driver bug provided by Jon W Grubbs (jgrubbs@megsinet.net).
...
This bug is only visible on some disks, and I have verified that it works
correctly on VAX. However, du to the author, it is a problem on other
machines/disks as well. Here's the author's comments:
> The MI code for the NCR5380 has a small bug in it The RZ56 wants to
> negotiate for Synchronous Data Transfers and when it does, the current code
> looks like it will send a REJECT message as the spec calls for when we cant
> handle the request. However, a couple of lines of code in the
> ncr5380_msg_in routine are missing wrt the PARITY message and anything that
> wants to send a REJECT message. The ATN setup that is done in
> ncr_sched_msgout is immediately negated by the final byte ACK sequence in
> this routine. This causes bad things to happen to an RZ56.
2000-05-26 21:11:00 +00:00
e3427d8f2c
Call bus_dmamap_sync() properly before/after reading fcd_stats
...
in fxp_control_data.
2000-05-26 19:11:24 +00:00
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
de5dacd81d
KNFfied those files.
2000-05-26 06:32:56 +00:00
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
5dca757b0e
Swap the order of u_int16_t member in Tx/Rx descriptors
...
on big endian machines.
"Big endian mode" of smc83c170 actually works!
(i.e. no htole??()/le??toh() functions are needed.)
2000-05-26 00:20:26 +00:00
dea97be7fd
Don't use bcopy() to copy u_int16_t data to u_int8_t array.
2000-05-26 00:14:41 +00:00
c9a7ec7a66
Add Davicom DM9102 registers.
2000-05-25 22:50:11 +00:00
7c709cc6b4
Comment the fact that the X3201-3 requires FS|LS in the setup
...
packet descriptor.
2000-05-25 22:18:07 +00:00
f4a3f5ea48
So, while the DEC chips and other clones want no FS|LS in the
...
setup descriptor, apparently the Xircom X3201-3 requires it.
2000-05-25 18:46:07 +00:00
4bfbc7641d
Recognize the DE-650 with another vendor/product pair and OUI.
2000-05-25 17:21:48 +00:00
215a635a5b
Truncate receive buffers to 4-byte boundary. Slightly modified
...
from kern/10198, from Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>.
2000-05-25 16:47:18 +00:00
2f08658512
Fix a couple of typos in debugging messages. From IWAMOTO Toshihiro,
...
kern/10194.
2000-05-25 16:37:33 +00:00
05a766d42e
Don't set FS and LS in the setup packet descriptor. From
...
IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>, kern/10194,
and confirmed with the 21040 manual.
2000-05-25 16:36:03 +00:00
3e54d43abc
Be sure to not use tagged queueing for a few commands.
2000-05-25 11:41:05 +00:00
c9347a04a5
Regen.
2000-05-25 10:16:37 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
c25111e4ae
Make two previous changes more correct, as shown by Izumi Tsutsui.
2000-05-24 13:20:32 +00:00
8922795de0
The EEPROM is little-endian.
2000-05-24 08:04:23 +00:00
66083288eb
Fix DMA status reading on big-endian systems. From Sanjay Lal on port-macppc.
2000-05-24 07:49:13 +00:00
35bf53bd9c
And a newline after error string.
2000-05-24 06:04:12 +00:00
37cc37ead2
correct pcmcom detach (like card removal). PR 9334.
2000-05-24 03:44:46 +00:00
d4bcd03b81
PR/10154: Antti Kantee: ignore 0 length resource(s)
2000-05-23 17:50:53 +00:00
2904666f56
Allocate dynamically the command block descriptors.
2000-05-23 17:08:07 +00:00
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
e662e86225
sd_interpret_sense() can be called from interrupt context; call scsipi_start()
...
with XS_CTL_ASYNC if the failed command was called with XS_CTL_ASYNC.
Add a SDF_RESTART flag to keep state, cleared in sddone().
A mounted disk can now spin down, it will propely spin up at the next access.
2000-05-23 10:20:14 +00:00
373582e298
scsipi_get_xs(): if we have XS_CTL_URGENT, return an xfer even if
...
active >= openings. An XS_CTL_URGENT command could otherwise fail, especially
if openings == 1.
2000-05-23 10:16:43 +00:00
28ec465498
Remove $Id.
2000-05-23 08:41:49 +00:00
f87f33d513
Allow userland to retrieve whether the card support WEP while the
...
card power is off. This allows wiconfig to set WEP key etc while power off.
2000-05-23 08:25:51 +00:00
9f00930ace
Make AHC_DEBUG compile.
2000-05-23 03:50:12 +00:00
b7c3dc6d20
Recognize more models of the IBM card. From PR 10137.
2000-05-23 02:55:19 +00:00
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
b8322d5c23
Const poison the layout name.
2000-05-23 00:44:38 +00:00
c9fe89891a
Don't try to re-enable tags once they have been disabled because of a
...
MSG_REJECT from the target. Obey the NOTAG quirk.
2000-05-22 21:14:24 +00:00
f5d4219e96
Remove an used variable and add a missing `}' so that this compiles.
2000-05-22 16:52:03 +00:00
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
a6d8e45ba7
Call bus_dmamap_unload() if any Tx mbuf remains in rtk_stop().
2000-05-21 13:00:46 +00:00
20a98cb524
count input and output packets.
2000-05-20 18:33:18 +00:00
649ff32f2b
Rather than using a magic constant, use `com_scratch' as the offset
...
in UART space to the interrupt CSR.
2000-05-20 18:25:41 +00:00
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
9f7a44710e
Remove (more) VAX dependencies.
2000-05-20 13:41:33 +00:00
9816b43753
regen
2000-05-20 06:30:13 +00:00
773f9bb009
Add Geocast's vendor ID
2000-05-20 06:29:50 +00:00
071aed40ac
A foolish consistency; most parts of the kernel use bp->b_data, so
...
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
2000-05-19 18:54:22 +00:00
415552f3db
add spanish keymap, data from
...
Juan Jose Garcia Ripoll <jjgarcia@ind-cr.uclm.es>
2000-05-19 16:40:04 +00:00
4a523cfe34
define spanish keymap
2000-05-19 16:39:15 +00:00
92f539aa66
Calibrate the timeouts from rev 1.26 by using DELAY(1) so their
...
values are less machine-dependant. Fixes port-i386/10141, where
spurrious timeouts were being seen.
Also note the line numbers of the timeouts so it can be determined
which is being seen (via __LINE__).
2000-05-19 16:00:30 +00:00
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
5f56eae96a
Add a quirk table entry for the OnStream ADR50 Drive;
...
from S.P.Zeidler <spz@serpens.swb.de> in kern/10118.
2000-05-19 06:55:42 +00:00
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
424619ca1a
Fix the sparc64 console.
...
Unlike the other Sun machines, UltraSPARCs can have consoles run on different
chips than zs, so we need to support them. So, here we go:
Add a new PROM console driver with a major number and everything.
This is the default driver if nothing else attaches. It does not
use the keyboard driver since the PROM translates keystrokes itself.
(Unfortunately it also swallows L1-A).
Have the keyboard driver take over the console when it attaches on a
serial port. When a serial port detects a keyboard and attaches the
keyboard driver, it needs to provide a set of consdev vectors. They
keyboard driver will use those to send I/O to the keyboard and mouse.
2000-05-19 05:26:16 +00:00
c2e8f67477
Add some missing casts of ioctl arg.
...
Obviously autoconfiguration wouldn't work on big-endian machines.
2000-05-19 04:53:25 +00:00
f636538446
NULL != 0
2000-05-19 04:34:39 +00:00
1cff94b896
Add missing field in static initialization.
2000-05-19 04:03:33 +00:00
59164fe0fc
Fix an inverted test.
2000-05-18 17:55:17 +00:00
badbd98b2a
rearrange the order of bus_dma operations to be more like many other
...
drivers, at the suggestion of fvdl. also, use bus_dmamap_load() not
load_raw().
2000-05-18 14:00:46 +00:00
6095f60587
regen
2000-05-18 13:04:27 +00:00
309b0ed70d
fix typo in last commit
2000-05-18 13:03:31 +00:00
cc57e4111a
do not pass a `boundary' argument to bus_dmamap_create(), particularly one
...
that is smaller than the `size' argument.
2000-05-18 12:49:09 +00:00
4d3e8e6976
regen
2000-05-18 08:03:22 +00:00
81fd58c65b
Add the device ID for the IBM MPIC-II.
2000-05-18 08:02:19 +00:00
b5cf4e96cf
Use big-endian CRC on ADMtek multicast hash.
2000-05-18 03:02:45 +00:00
5274a6162f
Add a device driver for the Cyclades-Z series of intelligent multi-port
...
serial boards. Written by Jason R. Thorpe and Bill Studenmund.
2000-05-17 17:58:09 +00:00
07ea678d4d
Register definitions and preliminary API definition for the PLX 9060
...
family of PCI bus controllers.
2000-05-17 17:47:00 +00:00
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
47490d3527
Whitespace glitch.
2000-05-16 00:18:44 +00:00
e7d81a3225
Fix a tyop, pointed out by Bill Studenmund.
2000-05-15 23:56:49 +00:00
e66be0bd10
Cosmetic change
2000-05-15 16:38:49 +00:00
ceb378e070
Add few peripheral device type
...
Remove "???" from T_IT8_1/2. They actually are pre-press devices for graphic arts as described by ASC IT8
Zeros and blanks scsipi_inquiry_data from byte 58 to byte 74 if additional_length is less than 58
2000-05-15 16:35:49 +00:00
c94bdce1f4
Don't enable debug message by default.
2000-05-15 15:16:59 +00:00
7e71ffde06
Sync copyrigth notice
2000-05-15 08:48:25 +00:00
c4042e45a5
Sync my copyrigth notice.
2000-05-15 08:46:00 +00:00
92a5f4d724
Sync my copyrigth notice
2000-05-15 08:32:07 +00:00
2b86c61a31
- sync my copyrigth
...
- Add usefull message for obsolete error code (part of fix for kern/9856).
2000-05-15 08:31:33 +00:00
e557084177
Update for siop split.
2000-05-15 08:27:24 +00:00
769cc65919
Free memory when failed to map it.
2000-05-15 08:08:12 +00:00
01f1223f94
Cosmetic changes.
2000-05-15 07:57:19 +00:00
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
863014523a
- split siop.c in script-dependant vs script-independant part, for
...
comming esiop
- add a reset callback for bus-dependant registers settings
2000-05-15 07:48:24 +00:00
95d08cb691
Regen
2000-05-15 07:44:05 +00:00
06d4aa45eb
- use my standart copyrigth notice
...
- After reselect, don't clear ack after the IDENTIFY message, this breaks
when the reselecting target has different sync parameters than the previous
one.
2000-05-15 07:43:45 +00:00
7da80620c9
splimp() -> splnet()
2000-05-15 01:55:53 +00:00
e5ae7c287a
Symbol namespace cleanup: rl_ -> rtk_
2000-05-15 01:55:12 +00:00
a4b298224a
Use <dev/ic/ac97reg.h>
2000-05-15 01:35:29 +00:00
706ee091ed
Move register definitions into ac97reg.h
2000-05-15 01:32:03 +00:00
1838aef29c
ac97.h -> ac97var.h
2000-05-15 01:27:44 +00:00
e852afa89f
Fix a typo
2000-05-14 19:52:34 +00:00
94cd08a535
Handle better the status codes.
...
Add a way to instruct the upper layer to don't bother w/ new requests if/when a device queue is full/busy or the device is unavailabale at that time
Use scsipi_inquiry_data instead of its own inquiry structure
2000-05-14 18:25:49 +00:00
1937dbee6a
Reflect changes in scsipi_inquiry_data structure: "flags" field is now named "flags3"
2000-05-14 18:22:13 +00:00
f65d97bb57
Change scsipi_inquiry_data strucure to be ANSI SPC-2 rev16 compliant
2000-05-14 18:20:11 +00:00
ac9d663468
My (Cabletron) card supplies two more statistics counters.
...
Instead of dropping them all, read out min(expected, supplied).
2000-05-14 17:19:18 +00:00
2e9acbbc58
Typo.
2000-05-14 15:19:24 +00:00
22ead9a824
Regen.
2000-05-14 15:18:33 +00:00
a2c48b9c79
Add a few devices.
2000-05-14 15:18:16 +00:00
8513bb93ed
Regen.
2000-05-14 14:58:14 +00:00
b84dfa7c45
Add SGI IOC3.
2000-05-14 14:56:53 +00:00
e6f1ac083f
Release dlreg.h into the public domain. It's hardly a great creative
...
work, after all.
2000-05-14 09:46:17 +00:00
ba84aa08e8
one less - the bootblocks were even easier shot than I though :)
2000-05-13 20:18:29 +00:00
084953b8f7
Update from Matthew Jacob:
...
Correctly account for F-port vs. F-port (no FLOGI_ACC) topologies.
Make sure we get a port database entry for the fabric name server.
Preserve fabric logins if the device didn't change across fabric
or port database changes, or the device has already logged into
us (e.g., for target/initiator dual role devices like Veritas
SANbox). Propagate class 3 service parameter changes where devices
can change roles.
Fix all occurrences of setting a sendmarker so that setting it
for one bus on dual bus cards doesn't wipe a pending sendmarker
for other busses on the same card :-;.
Comments added and clarifications made in some of the target mode code.
2000-05-13 16:53:03 +00:00
9d61165c26
Oops. Swedish is KB_SV.
2000-05-13 14:40:10 +00:00
ba714a7f2c
regenerate from mcadevs, to get proper 'generated from' info
2000-05-13 14:20:40 +00:00
d63e211e90
one more
2000-05-13 14:00:19 +00:00
05a45852e4
superseded by http://www.netbsd.org/Ports/i386/ps2.html
2000-05-13 14:00:02 +00:00
83d50760d8
Add keypad-# and Swedish layout
2000-05-13 12:16:35 +00:00
5d05bf7a7a
Add Archimedes mouse/kbd/video
2000-05-13 12:13:45 +00:00
e0292df01c
sc_ih (interrupt cookie) is not pci-specific data
...
and needs to remain in fxp_softc rather than fxp_pci_softc;
otherwise we break cardbus.
2000-05-12 18:46:33 +00:00
cd82969dfc
Print the revision info from the PCI configuration header. From
...
Dave Sainty, kern/10025.
2000-05-12 17:52:07 +00:00
c8de5ae180
Treat the 3c980C-TXM like the 3c980 Server Adapter. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:48:47 +00:00
032c5f01de
Regen.
2000-05-12 17:47:05 +00:00
0a712d4707
Add product ID for 3Com 3c980C-TXM 10/100 Ethernet. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:46:47 +00:00
d6c07323b2
If using ring-mode, don't update the receive descriptor list base address
...
when a receive overrun occurs. From Castor Fu <castor@geocast.com>.
2000-05-12 17:09:27 +00:00
f0481f14ab
Oops! We actually want the *lower* 6 bits of the crc32 of the multicast
...
address to generate the multicast filter bit index, not the upper 6.
Should address kern/8268.
2000-05-12 16:57:30 +00:00
6e4b4f6954
Use ether_crc32_le().
2000-05-12 16:45:42 +00:00
692e54c43d
Use ether_crc32_be().
2000-05-12 16:44:19 +00:00
288883fca7
Apply indent(1).
2000-05-12 16:42:41 +00:00
6474f16852
Use ether_crc32_le().
2000-05-12 16:41:59 +00:00
0ee6a24aa7
Read upd_pktstatus from DMA buffer after bus_dmamap_sync() called.
2000-05-12 15:22:33 +00:00
9b45dfba17
Accept any 'sc' value when probing atapi drives: with some drives, or
...
controllers, or combination of both, the value can be different from the
expected one after a reset.
2000-05-12 15:00:33 +00:00
421c001447
Move struct fxp_pci_softc declaration to if_fxp_pci.c removing an
...
unnecessary header file (if_fxp_pcivar.h); oh, how quickly the nascent
inodes are subject to infant mortality.
2000-05-12 13:46:31 +00:00
cd552bf956
Fix bugs seen on Sony Vaios.
...
Address kern/9370, kern/9548, kern/9571, and kern/9573.
Save and restore critical PCI configuration registers because they are
sometimes bashed.
Add a powerhook to restore said PCI registers after APM events.
The fxp now works across a warm boot from windows (vaio).
The fxp now works across an apm suspend/resume or hibernate/resume cycle.
2000-05-12 03:37:40 +00:00
6622f20fc1
Move pci-specific data to fxp_pci_softc from fxp_pci_softc.
...
Add some more pci-specific data to fxp_pci_softc.
2000-05-12 03:36:18 +00:00
e50925114e
Catch some potentially infinite loops in while() loops if the chip happens
...
to "go insane" and never complete some operations (dmasync, etc.).
2000-05-12 03:35:57 +00:00
8d671b6292
Define some PCI power management CSR constants.
2000-05-12 03:35:34 +00:00
2d09335a35
Fixes from PR 9838:
...
Only access board memory using the front-end functions.
Add hook for clearing latched interrupts.
Corrent debugging printf of ethertype on LE systems.
Make it possible to us I82586_DEBUG as a kernel option.
Tested on arm26 and mvme68k.
2000-05-11 20:55:03 +00:00
4d65db2d97
RATOC REX-R280 (another if_mbe_pcmcia card) support by UCHIYAMA Yasushi.
...
Originally part of pr 6789, reworked by the submitter to fit into -current.
2000-05-11 19:24:35 +00:00
2185bcc386
MI part of MicroChannel Architecture bus support
...
This work is based on code written by Scott D. Telford, the IBM
Token Ring card attachment was written by Gregory McGarry.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 15:42:00 +00:00
2222d240a7
Use correct divider value for scxfer
2000-05-11 09:30:12 +00:00
8c999651eb
Change adw_isr_callback() status handler
...
Add a catch for DMA Error which show up on Intel 82443BX Host Bridge/Controller (rev. 0x03). This doesn't fix the problem, but reset the SCSI bus and reinitialize the host adapter
Minor cosmetical changes
Thanks a lot to Greg Oster and Andan Lauber
2000-05-10 21:22:34 +00:00
5786c811d5
Support 64-bit PCI memory mapping registers, as sometimes are used
...
on the Symbios 53c896 controller. Also, prefer memory space over
I/O space.
2000-05-10 17:22:46 +00:00
90f7e687dc
These are no longer used.
2000-05-10 17:09:44 +00:00
d56c0ff801
Support Adaptec U2W cards with a 64-bit PCI memory range (such cards
...
are available with Power Macintosh G3 and G4 systems).
2000-05-10 17:07:52 +00:00
5939e70ca3
Add support for mapping 64-bit PCI memory space. If the region
...
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
2000-05-10 16:58:42 +00:00
82dbe14248
No need to specify page alignment; this is automatic.
2000-05-10 14:25:43 +00:00
bb1605cff5
Fix bogus `boundary' argument in bus_dmamap_create().
2000-05-10 14:16:11 +00:00
2e595d79d8
Load DMA buffer before mapping it into kernel space.
2000-05-10 11:15:32 +00:00
7a6f003756
Add a comment describing the previous change.
2000-05-10 08:39:58 +00:00
014be1da8b
Move if_rl_cardbus.c:1.8 to if_rtk_cardbus.c.
2000-05-10 00:24:14 +00:00
7d4bae615d
Move if_rl_pci.c:1.7 to if_rtk_pci.c.
2000-05-10 00:19:55 +00:00
18a16edec1
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 23:16:19 +00:00
1bf775b965
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 22:42:08 +00:00
e02d0e3597
Back out rev 1.7 of i82365_isa.c; 0x300-0x3ff, or even 0x330-0x3ff
...
is not a reasonable place to allocate 12-bit pcmcia iospace.
It seems to cause conflicts on a large number of modern laptops,
necesitating hand-patching of the kernel (mostly due to
video devices in the upper range of that space).
This will presumably cause problems on the NEC Versa 6030X,
however that appears to be a vastly less common case than
the laptops that are inconvenienced by the current state.
12-bit iospace now uses 0x400-0xfff.
2000-05-09 17:59:39 +00:00
05e928a241
Ops, abort if we can't map the registers ! Pointed out by Matthias Drochner.
2000-05-09 17:05:52 +00:00
6b66bf5d80
set paa_busname to pcmcia, like the i82365.c driver does.
2000-05-08 19:44:34 +00:00
1a1595070f
Fix the most glaring bug in the old rbus code. This way your machine won't
...
panic with a 3c562, but it won't work either.
2000-05-08 19:27:00 +00:00
5da7a65ca6
Back out my rbus change since it seems to break things.
2000-05-08 19:25:46 +00:00
622e87734a
Quiet some uninitialized variable warnings that do in fact look legitimate.
2000-05-08 18:28:46 +00:00
79cbea8cc3
Don't use not-in-user-namespace variable names that newer versions of
...
GCC doesn't like very much.
2000-05-08 18:23:36 +00:00
6644e670f7
Change the way ADW_CARRIER is allocated and handled.
...
Increased ADW_MAX_CCB to 63 and ADW_MAX_CARRIER to 253
Print WDTR/SDTR negotiation result per target
Protect AdvISR() inside splbio()/splx() pair
Add a pending queue to keep track of all the CCBs that are being executed by the host adapter.
Rewrote timeout handler in a more efficient way:
After 3 timeout now the SCSI is resetted and all pending queues not completed are now reenqueued in the waiting queue so to get executed just after the BUS Reset (hoping that resetting the SCSI BUS and reinitializing the adapter could solve the problem).
2000-05-08 17:21:33 +00:00
2648a72bb2
Minor changes to PCI configuration
2000-05-08 17:11:54 +00:00
6d3ce966ce
VIA VT82C686A hardware monitor
2000-05-08 16:40:42 +00:00
e6469f14ad
move static function getstr() to cons.c, make it publically available
...
as cngetsn(). there will be other consumer.
2000-05-08 16:30:57 +00:00
20edddd023
KNF the code and fix three bugs:
...
* If a non-zero addr was given to rbus_space_alloc_subregion() it would
claim to have allocated region when in fact it just failed.
* If a non-zero addr was given to rbus_space_alloc_subregion() allocation
often (always?) failed when it shouldn't.
* One part of rbus_space_alloc_subregion() used an alignment that always
made the kernel panic.
I'm not sure if my change is correct, because I don't know what this code
is supposed to do. But now I can use a 3c562 card.
2000-05-08 14:00:05 +00:00
fd36bc02a6
Swap the order of disabling the function and disestablishing the interrupt
...
on detach. This avoid accessing unmapped registers on multi-function cards.
2000-05-08 13:53:32 +00:00
621323af72
KNF some comments.
2000-05-08 13:51:36 +00:00
e169e0018c
Regen.
2000-05-08 13:26:05 +00:00
43c5780ae1
Allow a verbose description to be printed with the option MIIVERBOSE.
2000-05-08 13:25:34 +00:00
56aa5c16d1
Add another AMD chip.
2000-05-08 13:23:21 +00:00
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
f5bd37be57
Make the SPARC audioamd driver at least *compile*. Well, the C code, that is.
...
*sigh*
2000-05-08 02:44:31 +00:00
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
0d57ac396d
Product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 16:56:34 +00:00
f7e2752025
Change one 0 for bootverbose to 1 if DEBUG is defined.
2000-05-07 14:59:23 +00:00
20ae91400c
Add a dummy bootverbose.
2000-05-07 14:49:11 +00:00
21942247f3
It is a bad idea to declare a static bootverbose variable here. Remove it.
2000-05-07 14:43:31 +00:00
41dc1a6839
Avoid stomping on the W0_CONFIG_CTRL register which seems not to be
...
implemented on EISA cards. This makes a 3Com 3C597 Fast Etherlink TX
work for me at last, fixing PR kern/7067.
2000-05-07 14:03:25 +00:00
4a351b20bc
Minimized io ports reserved by this driver to the ports actually needed.
...
Fixes PR kern/5279 for this driver.
2000-05-07 13:57:16 +00:00
4211fcfd7e
remove unnecessary output to console
2000-05-07 13:50:10 +00:00
7392f90215
multiple inclusion protection
2000-05-07 03:01:58 +00:00
3d3dc5c594
add one
2000-05-07 01:46:01 +00:00
2f7dba9ea1
compilation fix
2000-05-07 01:16:23 +00:00
188ac21f3f
add bktr
2000-05-07 00:29:19 +00:00
006e9528a1
install bt8xx.h for bktr
2000-05-07 00:29:03 +00:00
4caea4817d
some glue for bktr-driver
2000-05-07 00:25:58 +00:00
5f8b869a3e
Some NetBSD specific changes; also TODO, and import script, based
...
on bind2netbsd by Bernd Ernesti
2000-05-07 00:24:33 +00:00
c2f780fbfd
Import of (finally busspaced) bktr-driver from FreeBSD (part 2).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:17:13 +00:00
8b27ce1a70
Import of (finally busspaced) bktr-driver from FreeBSD (part 1).
...
This version is from the location specified in the README, modified
by bktr2netbsd, to be committed later.
2000-05-07 00:16:17 +00:00
26f708a5a3
Handle the Linksys USB100H1 like the other Linksys adapters.
...
Restructure the code a little.
2000-05-06 20:38:59 +00:00
fd58a6ae12
Regen.
2000-05-06 18:28:36 +00:00
13d8353ffc
Add Linksys USB100H1, an Ethernet and HomePNA adapter.
2000-05-06 18:28:01 +00:00
82cfd6b42a
Simplify an expression.
2000-05-06 14:35:28 +00:00
4c46b93c8d
Add bba.
2000-05-06 14:34:31 +00:00
5e209d22f7
Print the usual interrupt line.
2000-05-06 00:46:19 +00:00
6a1547768c
Typos.
2000-05-06 00:44:00 +00:00
2b44ae84ee
LP64 printf fix. (I wish size_t was unsigned long on all platforms).
2000-05-05 17:52:38 +00:00
904ca34539
Ops, restore sync/wide parameters after a reselect.
...
Also, better handling of parity errors.
2000-05-05 09:32:48 +00:00
4c9516aa3b
Rework the command queue, to avoid having commands blocked at the end
...
of the queue. Load is now properly balanced across all disks of the same bus.
2000-05-05 09:05:44 +00:00
fc89ce9f53
Oops, nuke unused structure member.
2000-05-04 17:27:25 +00:00
2306b4a34e
When a WDTR message is rejected, initiate sync negotiation anyway.
...
When a SDTR message is rejected indicate that target is async
Add a missing bus_dma_sync call.
2000-05-04 17:18:27 +00:00
f5b572d26b
- LP64 issues in debug printfs.
...
- on a phase mismatch, do byte recovery only if we were in data phase.
Otherwise just clear the fifo.
- Properly handle reject of a sync or wide negotiation.
2000-05-04 16:56:13 +00:00
babd44e7a1
Ops, regen siop.out from the last siop.ss.
2000-05-04 15:44:35 +00:00
c8ff442f72
Add a flag hold in scratcha0, set when we're doing a data transfer. Used
...
for save data pointers.
2000-05-04 15:42:42 +00:00
319d44bfb1
Adjust asm patterns for newer versions of GCC.
2000-05-03 21:20:07 +00:00
5a5c88dc4e
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead. Also,
...
don't abuse the C preprocessor.
2000-05-03 21:08:02 +00:00
081e7cbdaf
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 20:52:29 +00:00
b29178acf3
Remove unnecessary junk on #undef line that some C preprocessors
...
get cranky about.
2000-05-03 19:19:04 +00:00
e37397c2e8
`typedef void ifnet_ret_t;' isn't valid C -- use #define, instead.
2000-05-03 19:17:54 +00:00
ab635a46d3
Slight change to previous.
2000-05-03 19:15:27 +00:00
2d66ccbd13
Don't return an uninitialized error code.
2000-05-03 18:58:37 +00:00
01e8438aa8
Fill in ccb->ccb_req.sgcount with the value that's guaranteed to
...
be initialized.
2000-05-03 18:58:15 +00:00
d0d92c23d0
Use USBD_NORMAL_COMPLETION in the previous.
2000-05-03 18:21:36 +00:00
ffe599486c
When emulating UHF_PORT_POWER for the internal hub, make sure to initialize
...
the status return value.
2000-05-03 18:14:49 +00:00
3bb9a5f666
- do sync/wide negotiation
...
- use a circular queue for the start slots, so that order has better chances
to be preserved.
2000-05-02 19:03:02 +00:00
621ef4d785
Add am7930 audio driver.
2000-05-02 06:43:05 +00:00
f9dbbf4c92
Make am7930 driver machine independent. PR 10032 from Gregory McGarry.
2000-05-02 06:30:49 +00:00
8ca78ff825
In siop_lookup_product(), actually check the PCI *vendor* ID as well as the
...
product ID.
Prevents false matches of other devices, such as the DEC 21050 ppb.
2000-05-02 03:59:35 +00:00
712326ecbd
Traditionally, the floppy controller was configured at 0x3f0 for 8 ports,
...
but the registers actually begin at 0x3f2, and this is what PNPBIOS reports
for the floppy controller resources. Adjust the register offsets and the
mapping of them for the ISA front-end to compensate, so that the PNPBIOS
attachment of the floppy controller actually works.
2000-05-02 03:33:45 +00:00
5e915fcab9
Nuke some dead code.
2000-05-02 03:32:09 +00:00
c7d698ac41
Support recording conversions that change the sample size. PR 10029, from Gregory McGarry.
2000-05-02 00:00:00 +00:00
2365a92cb5
Add Creative Music System driver. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-01 22:48:33 +00:00
4e1e58e353
Change the way the codec is access to mimic how Linux&FreeBSD does it.
2000-05-01 17:15:41 +00:00
07f142cd50
Add some more debug output.
2000-05-01 17:10:40 +00:00
9498452c05
- Move some initialization into MI rl_attach() from each bus attachment.
...
- Use proper CARDBUS_* macro in if_rl_cardbus.c
- Use product ID read from PCI configuration space rather than from EEPROM
in if_rl_pci.c.
Patch sent from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> and
some cosmetic changes by me.
2000-05-01 15:08:50 +00:00
ac6e6c980d
Add Seeq 8003 register definitions.
2000-05-01 08:06:17 +00:00
7d3231b37a
Mouse move event should be made before mouse bown event. Without that,
...
you may got a mouse down event in strange plase.
2000-05-01 07:36:58 +00:00
drochner