c685105f07
Don't deref a bad ucred pointer, from Dave Carrel <carrel@cisco.com>,
...
PR #1699 .
1996-03-05 02:35:39 +00:00
7b294ae934
Handle more than 10 interfaces of a given type (well, up to `if99', anyhow).
...
From Neil McRae, PR #1992 .
1996-03-05 01:56:37 +00:00
8f4177ba60
Add another broken drive that doesn't deal with LUNs properly to The List.
...
Fixes PR 1961, from Kevin P. Neal.
1996-03-05 01:45:42 +00:00
85720fdf67
Add a blurb about the EXTMEM_SIZE option to the example kernels, disabled
...
by default.
1996-03-05 01:32:11 +00:00
b65bdb63d6
Add an EXTMEM_SIZE option to set the size of extended memory on systems
...
that lie about it. Deals with PRs #1319 and #1831 .
1996-03-05 01:28:51 +00:00
ae5cde21bd
RCS id police.
1996-03-05 00:37:24 +00:00
a8573feb51
Normalize SCSI autoconfiguration output.
...
From Chris Demetriou <cgd@NetBSD.ORG>. Fixes PR #1958 .
1996-03-05 00:15:09 +00:00
04145bfde8
Fix for newer S3 chipsets by Matthias Scheler (from -current).
1996-03-04 20:36:56 +00:00
9f330ed6e0
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2168).
...
(the xd bugs also apply to the xy driver...)
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:25:32 +00:00
e4c86dc3f8
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2168).
...
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:22:50 +00:00
9bb0e5dba5
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2169)
...
[these bugs apply to the xy as well as the xd driver]
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:13:39 +00:00
9fee13d104
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2169).
...
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:11:32 +00:00
7873fac590
Grr... my fault when send-pr'ing the "CPU too fast" error patch. The chip
...
is called BT458, not BT478.
1996-03-04 19:49:11 +00:00
c8487c701e
reorganize mapping register definitions
1996-03-04 19:30:50 +00:00
272d9f69d2
fix aux argument to config_found() for secondary bus.
1996-03-04 17:02:46 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
7f1ba9f148
Update for changed DMA interface.
1996-03-04 04:01:03 +00:00
acabb62791
the i386 port no longer attaches isa, eisa, and pci at root.
1996-03-04 03:29:12 +00:00
fedca4f133
Attach isa, eisa, and pci to mainbus now, rather than root. The i386
...
now has a single device tree (rather than a forest). Also, attach
EISA only if it's present, and attach in order: PCI, EISA, ISA (most
specific to least specific).
1996-03-04 03:25:48 +00:00
5b663732fa
Remove extra RCS id.
1996-03-03 17:18:14 +00:00
9029778d04
RCS id police.
1996-03-03 16:54:17 +00:00
b2c3f54207
Fix logic errors in new console probe code that caused framebuffers
...
outside of "internal i/o" space to not even have a chance at console-hood.
Fix tested by Thorsten Frueauf <frueauf@ira.uka.de>, and offered with
my sincerest apologies that the bug ever existed in the first place.
1996-03-03 16:48:52 +00:00
c2ce0848e2
Added ns_cksum.c.
1996-03-03 11:56:33 +00:00
c76bb64058
Machine-optimized version of ns_cksum.c.
1996-03-03 11:54:37 +00:00
c22fc0bce4
Enable label_t.
1996-03-03 11:21:31 +00:00
e82da18ec2
Fix include file ordering.
1996-03-03 11:18:59 +00:00
f2bcddae7f
Fix fuswintr/suswintr arguments to match prototype.
1996-03-03 11:17:59 +00:00
570949e0e4
Catch up with ITE data structure changes.
1996-03-03 04:23:33 +00:00
8c395495bf
set ia->ia_iosize to 0 so that the probe code doesn't spit out lots of
...
gunk.
1996-03-03 04:12:48 +00:00
855b6def84
Add ns_cksum.
1996-03-02 23:55:17 +00:00
7ade5ebd76
Files needed to create boot floppies for 11/780, most of them
...
taken directly from 4.4BSD.
1996-03-02 17:57:34 +00:00
115750720d
Do not return whiteout directory entries in NFS readdir replies. (The
...
NFS protocol doesn't know how to deal with them properly, yet.)
1996-03-02 15:55:52 +00:00
ffc8953cd7
Change config delay's to more reasonable values.
1996-03-02 14:29:23 +00:00
39aeb2aa25
console driver for the CyberVision64
1996-03-02 14:28:51 +00:00
5d89814116
Changes due to 11/780 support. Raise splimp() to BR7.
1996-03-02 14:27:52 +00:00
cef093b42e
Add VAX780 support to the boot program.
1996-03-02 14:22:57 +00:00
8fbcb8ce5a
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding
...
file lines in files.vax.
1996-03-02 14:19:47 +00:00
10fe8f1971
All devices can now be in GENERIC.
1996-03-02 14:14:05 +00:00
827892239a
Add support for DW780. Note that ubareset's don't work properly.
...
This is not a problem on other Unibus adapters, but DW780's do
ubareset's more often. This needs to be fixed by someone someday.
1996-03-02 14:09:57 +00:00
89e32834cd
Fix some too long delays. Set some structs volatile that otherwise
...
caused hangs during autoconfig.
1996-03-02 14:06:03 +00:00
18fd2ce9c2
Updated for the new CyberVision64 console
...
gen_cvtab.c is no longer needed
1996-03-02 14:02:53 +00:00
6160a6474d
Updated for the new CyberVision64 console
...
and a small cleanup in the GENERIC config
1996-03-02 14:00:31 +00:00
508f81daca
Support for VAX 11/780 - 11/785 system types added.
...
There are no support (yet) for the RX01 console floppy,
even if it is actually needed to create boot floppies.
(The arff utility is also missing, so...)
1996-03-02 13:45:34 +00:00
a14bb8a710
Add a #ifdef TUDEBUG around a printf statement.
1996-03-02 13:41:24 +00:00
c45af1134a
Unibus/Q22 bus device driver for DHU-11 serial card.
...
Written by Ken Wellsch. (kcwellsc@math.uwaterloo.ca )
1996-03-02 13:30:53 +00:00
7c61fe7779
change printing of unknown device names when not (BUS)VERBOSE slightly
1996-03-02 02:44:25 +00:00
0d2cc07e1c
remove some colons to be slightly more friendly to things trying to
...
parse autoconfiguration output.
1996-03-02 02:28:48 +00:00
91f3357fe9
clean up some diagnostic printfs
1996-03-02 02:25:40 +00:00
a4d39f5063
fix uninitialized variable; it shouldn't have been a variable at all.
...
(when probing to see if a device is there, always probe function 0.)
1996-03-02 02:03:55 +00:00
25d3eceab3
regen for changed tcdevs
1996-03-02 01:21:20 +00:00
305d9a88f6
typo in KZTSA-AA
1996-03-02 01:20:58 +00:00
9f36679a47
generated files
1996-03-02 01:17:58 +00:00
c1c41f6bfc
add ability to define TCVERBOSE, and get "human names" about "known"
...
but unconfigured (or unsupported) devices printed at boot time.
The device list is woefully incomplete, because i didn't put much time
in it, and because i don't know good "human names" for many TC devices.
1996-03-02 01:16:47 +00:00
f33acccd57
if not EISAVERBOSE, don't say that vendor/product is "unknown," just say
...
what it is.
1996-03-02 01:09:37 +00:00
8806ff8c86
oops; spaces -> tabs
1996-03-02 01:09:13 +00:00
c7241fb1ce
if not PCIVERBOSE, don't say that vendor/product is "unknown," just say
...
what it is.
1996-03-02 01:07:47 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
97fbc0015b
Add bit definition for auto-initialize mode.
1996-03-01 22:27:09 +00:00
9aebe01038
Add newlines to CPU class notices
1996-03-01 21:49:49 +00:00
c1e8e92697
"major" declarations which got lost when the scsi stuff was changed to
...
include ../../../scsi/conf/files.scsi
1996-03-01 19:42:26 +00:00
9e8b6a032a
Don't try to make dependencies for SFILES if it isn't defined.
1996-03-01 17:03:17 +00:00
9f2837ac9b
"oops", forgot to check this in...add entries for the cgfour and cgeight.
1996-03-01 08:11:00 +00:00
f579d1a485
Fix an operator precedence botch. *sigh* This just hasn't been my week.
1996-03-01 07:44:43 +00:00
d8026ad9ef
Oops; switched two bits.
1996-03-01 04:35:27 +00:00
f3b29ca5d2
Remove two unneeded `if's.
1996-03-01 04:13:25 +00:00
546ad9e88b
Add support to the ISA DMA framework for auto-initialize mode.
...
Add experimental SB16 code, disabled for now.
1996-03-01 04:08:13 +00:00
950eda2d54
Replace DEBUG with NCR5380_DEBUG and do not define it by default.
1996-03-01 01:42:04 +00:00
abd3cf4df2
Don't reset `xs->retries'.
1996-02-29 23:33:48 +00:00
bf59310f69
Fix typo, and bring back VA hole handling.
1996-02-29 22:15:13 +00:00
a8804b9fb4
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft. (These are now generated files.)
1996-02-29 21:01:12 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
27db0deb1b
Use <sys/dirent.h> instead of <sys/dir.h> which is depreciated.
1996-02-29 20:36:39 +00:00
52d04f3b3f
Make sure to clear B_NEEDCOMMIT in the right spot. Fix 'officially blessed'
...
by Rick Macklem. Fixes PR kern/2128.
1996-02-29 20:26:16 +00:00
0c6f2633a8
If _KERNEL then define the DIRSIZ macro. This lets the kernel use
...
<sys/dirent.h> instead of <sys/dir.h> which is a depreciated header.
1996-02-29 20:19:52 +00:00
331e377b30
Need to #undef DIRSIZ from <sys/dirent.h> before we redefine it.
1996-02-29 20:09:56 +00:00
6957383c25
Remove obsolete comment.
1996-02-29 19:37:53 +00:00
99e8401680
Add support for CapsLock and NumLock toggles.
1996-02-29 19:32:14 +00:00
d66ea3596c
Add dependency for syscallargs.h.
1996-02-29 16:02:30 +00:00
e800077389
Added to build the bootloader stuff.
1996-02-29 11:41:31 +00:00
48f5b02304
NetBSD/Atari bootcode by Waldi Ravens.
1996-02-29 11:35:46 +00:00
e538eed242
NetBSD/Atari bootcode by Waldi Ravens.
1996-02-29 11:35:05 +00:00
693685364b
Add kern_ntptime.c, per Thorsten Frueauf <frueauf@ira.uka.de>, PR #2146 .
1996-02-29 03:36:31 +00:00
93dff23036
Back out the "don't use DMA if SCSI_POLL is set" saftey-net. The
...
MI 5380 code did something I didn't really expect, which caused DMA
to disable itself if only DMA was enabled. *grumble*
1996-02-29 03:28:38 +00:00
1f6d8c1c1f
Fix for PR kern/2140: a typo in the nested CPP if/else/endif caused
...
SHIFT_HZ to be undefined for values of HZ other than 64.
1996-02-29 02:48:53 +00:00
2de7b2e5cb
update PMAP_PREFER
1996-02-28 22:44:33 +00:00
f6925cfbf3
Replace vm_object_prefer with PMAP_PREFER.
1996-02-28 22:39:13 +00:00
fdb309615e
Remove vm_object_prefer. VM code now calls PMAP_PREFER directly.
1996-02-28 22:35:35 +00:00
8bea3309c3
Fix typo
1996-02-28 22:09:27 +00:00
2d885d15e9
Fixup an RCS id.
1996-02-28 20:54:50 +00:00
50c8d6cdb0
Oops...missed to places where I could have used CPU type macros.
1996-02-28 20:53:02 +00:00
8caec41719
RCS id police.
1996-02-28 20:49:18 +00:00
b213396977
fix arguments to ahbmatch to properly reflect reality. provide prototyped
...
declarations for ahbmatch and ahbattach.
1996-02-28 20:29:48 +00:00
8c485c3690
syscalls.master changed.
1996-02-28 16:06:02 +00:00
636580a34f
Insert sunos_sys_fcntl().
1996-02-28 16:03:54 +00:00
883ff3e7f3
Changes from Walter Ruetten for P550 support.
1996-02-28 04:14:05 +00:00
379b6eadf4
pci devices are now specified like "foo* at pci? dev ? function ?". also,
...
add support for PPB's and secondary PCI busses, where appropriate.
1996-02-28 02:02:29 +00:00
0bcfb3598b
update for adjustments to ISA and PCI 'files' files
1996-02-28 01:58:25 +00:00
df03361e4b
update for new method of attaching isa/pci busses
1996-02-28 01:54:44 +00:00
591c6fd2cd
make PCI bus match/attach and sub-device attachment machine-independent.
...
(remove that code from this file.)
1996-02-28 01:50:02 +00:00
f5f5831829
make ISA bus match/attach and sub-device attachment machine-independent.
...
(remove that code from this file.)
1996-02-28 01:49:35 +00:00
51815fdcd6
Kill a mis-matched and unnecessary declaration.
1996-02-28 01:48:48 +00:00
2e86958f9b
make PCI bus match/attach and sub-device attachment machine-independent,
...
add definition of 'ppb' (PCI-PCI bridge) device.
1996-02-28 01:47:06 +00:00
47e551efff
Preliminary support for PCI-PCI bridges. Recognize a PCI-PCI bridge
...
and attach the secondary pci bus as a 'pci' device. Note that this support
is incomplete and will not yet work for ports other than that i386. (The
i386 can rely on the PCI interrupt 'line' information to determine
interrupt mapping, which is not necessarily possible on other systems.)
1996-02-28 01:46:32 +00:00
f1f9317dfb
make PCI bus match/attach and sub-device attachment machine-independent.
1996-02-28 01:44:41 +00:00
92d99153a3
Kill two mis-matched and unnecessary declarations.
1996-02-28 01:44:17 +00:00
3ca5707161
make ISA bus match/attach, and sub-device configuration machine-independent.
1996-02-28 01:43:45 +00:00
927a47d0d3
add isabus and pcibus attributes, for attachment of isa and pci busses
1996-02-28 01:42:42 +00:00
b1305e88db
dir => dirent
1996-02-28 01:41:25 +00:00
ee8a2c002f
Copyright assigned to The NetBSD Foundation.
1996-02-28 01:01:17 +00:00
bfbc5fb90c
Copyright assigned to the NetBSD Foundation
1996-02-27 22:39:39 +00:00
311a14c618
add a comment (XXX) about eisa's attachment.
1996-02-27 22:39:28 +00:00
467a64a327
Replace tc.c and ds-tc-conf.c with a re-written tc_subr.c. tc_subr.c
...
works with the revamped machine-independent TC code in sys/dev/tc.
A name change is necessary to avoid a name clash with sys/dev/tc/tc.c,
which also creates a tc.o.
1996-02-27 22:35:05 +00:00
8bd51c47b9
Copyright assigned to the NetBSD Foundation
1996-02-27 22:28:09 +00:00
776c58e187
TurboChannel bus auto-configuration tables, and TurboChannel pre-autoconfig
...
probe functions for console framebuffers, rewritten to work with the
machine-independent TC support in sys/dev/tc.
1996-02-27 22:28:08 +00:00
f08c9ffa5a
make this compile again, since CONUNIT is no longer defined for us.
...
per Jason.
1996-02-27 22:11:44 +00:00
edf9d66f32
First-cut support for P4 framebuffers. Currently supports P4 variants
...
of bwtwo, cgfour, cgsix, and cgeight. Includes support for attaching
the overlay plane of the cgfour and cgeight as a bwtwo instance (a'la
SunOS).
P4 register descriptions, cgfour driver, and cgeight driver partially
derived from OpenBSD.
This code may still need polishing.
1996-02-27 22:09:14 +00:00
4e07b4b16f
eisabus attribute moved to conf/files
1996-02-27 22:00:25 +00:00
cb8f484a57
tcbus attribute moved to conf/files
1996-02-27 22:00:04 +00:00
d45c3d85a4
Move eisabus, tcbus attributes here. Attributes that "machine-independent"
...
bus support want to attach to should be declared in conf/files, so that
hairy ordering constraints on the inclusions of busses' "files" files
in files.{MACHINE} are avoided. isabus, pcibus attributes will go here later.
The problem is, for instance, that there are some devices in files.isa
currently which require that 'pci' be defined, but there are some PCI
devices (e.g. 'sio' on the Alpha) that provide isabus interfaces, i.e.
'isa' busses attach to them. Unless the the bus-attachment attributes
are here, it's impossible to declare the busses' files and attribute
dependencies in a machine-independent way.
1996-02-27 21:59:14 +00:00
a21351b381
use config_found_sm(), rather than config_search+config_attach()+glue, to
...
attach subdevices.
1996-02-27 21:48:52 +00:00
c6a9e56518
Replace config_found() with config_found_sm(), which adds a cfmatch_t to the
...
argument list. This allows easy 'submatching', which will eliminate a fair
bit of slightly tricky duplicated code from various busses. config_found()
is now a #define in sys/device.h, which invokes config_found_sm().
1996-02-27 21:45:46 +00:00
5688147b3a
Eliminate dependency on /usr/include/*
1996-02-27 20:54:43 +00:00
fe5a56ec9d
Be sure to malloc() in page-sized units.
1996-02-27 13:17:01 +00:00
70eee90be3
remove a printf
1996-02-27 09:10:24 +00:00
5cdb5e8ebe
Map SIOCGIFFLAGS and SIOCGIFADDR (et al).
1996-02-27 08:18:16 +00:00
9fa7b98204
Emulate OSIOCGIFADDR, et al, if COMPAT_LINUX is defined.
1996-02-27 08:17:08 +00:00
a252a2e3b8
Handle OSIOCGIFCONF if COMPAT_LINUX is defined.
1996-02-27 07:28:38 +00:00
48ec0383a3
Use OSIOCGIFCONF in previous.
1996-02-27 07:25:34 +00:00
3f2d99e7a2
fix first args in tcprint() invocations. Fix for this (and several previous
...
commits) from Jonathan. This is why one (I) shouldn't commit code w/o
having any sane way to test it.
1996-02-27 07:07:26 +00:00
4b2741c436
Map SIOCGIFCONF.
1996-02-27 05:51:05 +00:00
e7ef034c05
Add NTP kernel precision timekeeping from Dave Mill's xntp distribution
...
and the "kernel.tar.Z" distribution on louie.udel.edu, which is older than
xntp 3.4y or 3.5a, but contains newer kernel source fragments.
This commit adds support for a new kernel configuration option, NTP.
If NTP is selected, then the system clock should be run at "HZ", which
must be defined at compile time to be one value from:
60, 64, 100, 128, 256, 512, 1024.
Powers of 2 are ideal; 60 and 100 are supported but are marginally less
accurate.
If NTP is not configured, there should be no change in behavior relative
to pre-NTP kernels.
These changes have been tested extensively with xntpd 3.4y on a decstation;
almost identical kernel mods work on an i386. No pulse-per-second (PPS)
line discipline support is included, due to unavailability of hardware
to test it.
With this in-kernel PLL support for NetBSD, both xntp 3.4y and xntp
3.5a user-level code need minor changes. xntp's prototype for
syscall() is correct for FreeBSD, but not for NetBSD.
1996-02-27 04:20:30 +00:00
7c6f017cab
Import sys/timex.h from xntp 3.5a: NTP precision timekeeping definitions.
1996-02-27 03:55:49 +00:00
92c6f5f0ee
Get rid of some unneeded constants.
1996-02-27 03:29:16 +00:00
6ec37fa3df
Use IOBase instead of INTIOBASE.
1996-02-27 03:25:47 +00:00
db2f33c640
Clean out some unneeded constants.
1996-02-27 03:23:42 +00:00
8c79f5dd54
one more minor oops; print our name, not parent's, when doing unconfigured dev
1996-02-27 03:22:44 +00:00
09c7841a66
fix bug in previous commits. also, do submatch checking for all devices,
...
not just option slot devices.
1996-02-27 03:19:43 +00:00
1dcd5f9d15
For a bus error in nofault, if it's an 040, load the address from the
...
correct frame offset. This is required for the 5380 driver to work
properly.
1996-02-27 03:17:00 +00:00
ecc22fbecd
use #defines for bus speed constants, print speed on attach
1996-02-27 01:37:32 +00:00
3c43b4317d
alphabetize device list
1996-02-27 01:31:33 +00:00
9216cf3276
Drain rev 1 chips in dma_reset().
1996-02-27 00:36:11 +00:00
2c646f8da5
`bwtworeg' is just about the same as the generic `fbcontrol'.
1996-02-27 00:32:34 +00:00
7f4f1d2406
be consistent when talking about eisa_attach_args
1996-02-27 00:31:30 +00:00
4bd7608739
Better EISA autoconfiguration, per PR 1959.
1996-02-27 00:20:54 +00:00
e4a3b7650e
oops; remove extraneous #if/#endif pair
1996-02-27 00:15:23 +00:00
6b5eb65b21
bt_reg => fbcontrol.
1996-02-27 00:14:17 +00:00
570976f77c
change previously-useless config_rootfound() for the EISA bus so that
...
it provides what the new MI EISA code expects.
1996-02-27 00:13:45 +00:00
8628f94179
Use `video enable' bit in framebuffer control.
1996-02-27 00:11:14 +00:00
2fe54615fb
Define a couple more framebuffer control bits.
1996-02-27 00:09:23 +00:00
188cda224f
Trim some comments relating to EISA configuration that are no longer relevant.
1996-02-27 00:08:29 +00:00
440b3cbc94
update for new EISA autoconfiguration: there can now be an eisa0 at root,
...
and ahb attaches to eisa, not isa. Also, ahb* at eisa?... is now supported,
so you can get all ahb's configured easily.
1996-02-27 00:06:42 +00:00
897baa5642
machine-generated files
1996-02-26 23:47:18 +00:00
9b53b5770d
list of all EISA devices that we know about (for smarter 'unconfigured'
...
printing if 'options EISAVERBOSE'), and files to turn the list into c source.
From my PR (1959).
1996-02-26 23:46:17 +00:00
0adab4d779
Avoid accidentally lowering a devices console priority.
1996-02-26 23:40:29 +00:00
c0251e2a9d
(1) rename some structures & structure members, for consistency with
...
planned changes in other sections of code.
(2) expands the use of config_found() in tcattach() in-line, so that
tcsubmatch can be invoked there, rather than being invoked by
individual drivers.
(3) tcbus_attach_args now includes a turbochannel speed flag.
(4) compare a string in tcbus_attach_args against tc bus driver name,
to better allow attachment of multiple busses to the same parent.
1996-02-26 23:38:38 +00:00
ff27dbbcf9
Revert pmax stdarg.h and varargs.h to versions from 1995-11-13. Those
...
versions work correctly; at some point between then and the immediately
preceding revisions, the "stylistic" changes to one (or both) stdarg.h
and varargs.h broke passing doubles to printf().
1996-02-26 23:29:05 +00:00
32cdb91fa3
two more local addr changes, all done differently now (idea from charles)
1996-02-26 23:16:42 +00:00
056810ed99
Make this code independent of <sys/nfs> now that we use very little
...
from there anyway, so we can ignore changes in the NFS code...
1996-02-26 23:05:14 +00:00
4005c5fd09
Fix typo (PR 2123, from Michael VanLoon)
1996-02-26 22:48:32 +00:00
cf93780656
Adjust for the new console code; CONSCODE is now a kernel option, not
...
a dca-specific constant. For now, hardwire standalone DCA console
at select code 9 (which is what the old constant expanded to). Really
should make the way the bootblock console is probed look just like how
the kernel console is probed.
1996-02-26 21:51:25 +00:00
6a0803ca9a
Make these build again in the wake of the v3 changes
1996-02-26 21:50:07 +00:00
c24557134f
Needed for NFS booting; we aren't likely to use v3 here any time soon.
1996-02-26 21:49:34 +00:00
517988b940
Interims:
...
Comment out `STATINT' checking; this is apparently unreliable on some
ESP revisions.
Deal with target initiated synch re-negotiation.
1996-02-26 14:48:30 +00:00
86b9b4d6be
if we are connecting *to* an address of any local interface, default the
...
local address of the socket to the same address.
1996-02-26 08:25:47 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
5a1e1bb682
don't need isa/isareg.h or pci/pci{reg,var}.h.
1996-02-25 22:56:30 +00:00
a3ab0e81da
Use CPU-type macros.
1996-02-25 22:03:20 +00:00
3d182fe265
Use CPU-type macros
1996-02-25 21:53:49 +00:00
ba0eb7ea59
Use CPU-type macros.
1996-02-25 21:45:53 +00:00
3821dd940b
Oops. Do previous fix on the right line this time.. (thanks Charles)
1996-02-25 17:47:26 +00:00
1f20fc9fc2
Call soreserve() with the right size for receives (from pk).
1996-02-25 15:30:01 +00:00
95d7594df0
If NFS `rsize' is specified, set `readdirsize' too.
1996-02-25 13:27:01 +00:00
1376f92db9
Add routine to convert phys device number to kernel unit number.
...
Allow to set disklabel area writable.
1996-02-24 21:22:54 +00:00
f2aaea55c2
Make setroot() grok where we boot from even if it is hp disks.
1996-02-24 21:20:01 +00:00
6be793f659
use mono_time, rather than time, to keep track of timeouts. time can change
...
unpredictably.
1996-02-24 21:09:38 +00:00
6ab6c3037d
remove floating point expressions. gen_cvtab.c generates a conversion
...
table to replace a specific floating point expression in grf_cv.c
1996-02-24 20:13:00 +00:00
df5a5e9485
Remove __FORK_BRAINDAMAGE, and the reason to why it was there.
1996-02-24 15:17:35 +00:00
6969bbbc1c
Add ns_cksum.c.
1996-02-24 12:59:47 +00:00
830ceda65d
remove generic scsi stuff and use ../../../scsi/files.scsi
1996-02-24 08:59:21 +00:00
c6768054a9
cleanup, add (commented-out) serial buffer and lev6_defer options
1996-02-24 08:58:37 +00:00
1bf748f356
use newly allocated ethernet address ( fixes #2117 )
1996-02-24 07:47:36 +00:00
d1d39c63d4
remove local strncmp ( fixes #2115 )
1996-02-24 07:44:06 +00:00
d22df43756
cast to arg to caddr_t ( fixes #2114 )
1996-02-24 07:43:14 +00:00
40d57df71a
Switch byte order of ID and configuration registers for 14f and 34f.
1996-02-24 05:27:49 +00:00
fa7bee29a5
Completely rework how the console is probed. Console probing no longer
...
requires pre-autoconfigured devices. Fix up some prototypes. Part of the
long journey towards new config. (GETTING THERE!)
1996-02-24 00:54:53 +00:00
c1b23518d2
ARM FPE is now secure i.e. user processes cannot use FP instructions
...
to access kernel memory.
1996-02-23 22:20:43 +00:00
a01675725c
Added #ifdef FPE guard.
1996-02-23 18:50:56 +00:00
2294cbd022
Fixed bug causing DMA to user stack from Massbus disks to give segfaults.
1996-02-23 17:54:33 +00:00
2aa22f8fbf
Allow rewriting of disk label after newfs.
1996-02-23 17:29:01 +00:00
1a5d5e25c6
Add an "sw_options" patchable global so that folks can still live life
...
on the edge (of sw DMA uncertainty) with pre-built kernels.
1996-02-23 16:29:34 +00:00
568f862aeb
PR 2111: Do not update system clock until we can keep more accurate time.
1996-02-23 12:40:37 +00:00
ef3500b579
Attempt to work around a hardware bug that screws up DMA on the 4/100.
...
Apparently, some early 4/100 DMA controllers do illegal memory access on
large ( >= NBPG ) transfers at the end of the transfer. This appears
as SI_CSR_DMA_BUS_ERR in the csr. To work around this, we simply
transfer the (up to 3) missing bytes from the bpr. We were doing this
anyway, so the work-around is to ignore the bus error.
BUT! I goofed when I implemented the "left-over byte" code for the sw!
It *should* be correct now. Keep metrics (acceeible via DDB) on the number
of 1, 2, and 3 byte clean-ups, as well as the number of "clean" transfers,
just so we can get a clearer picture.
Thanks to Andrew Gillham <gillham@whirlpool.com> for noticing this!
1996-02-23 07:24:45 +00:00
738faf922f
Add ^^ and ^_ codes to default keyboard layout
1996-02-23 05:43:48 +00:00
ad355be572
Add a SDEV_AUTOSAVE quirk for the DEC RZ55.
1996-02-22 23:37:27 +00:00
946696f064
Add m68k/db_memrw.c
1996-02-22 23:35:07 +00:00
291267e40c
Implement SDEV_AUTOSAVE.
1996-02-22 23:35:04 +00:00
905de8df55
Remove prototype for strcmp() as this is in libkern.h
1996-02-22 23:31:51 +00:00
c3833aaabe
Opps, what was a delay() prototype doing here.
1996-02-22 23:25:10 +00:00
19d5694f93
Remove the hack that faked up an "ssp" value. It is now up to
...
locore.s to put the right sp in the frame. Also move memory
access code into db_memrw.c so it can be taken separately.
1996-02-22 23:23:23 +00:00
88be357d42
Fixed declaration of a debugging variable.
1996-02-22 23:03:44 +00:00
7b9c8753a7
Added #ifdef guards round the FPE initialisation calls.
1996-02-22 22:56:16 +00:00
66198928f8
Fixed several function declarations.
1996-02-22 22:51:14 +00:00
2c74bc8511
Removed some dead code and fixed several function declarations.
1996-02-22 22:48:05 +00:00
f266edf8b8
Default to running an FPA at full speed. Updated delay() to take an
...
unsigned int.
1996-02-22 22:44:58 +00:00
9a3e71626d
Fixed a little bug that zeroed the first couple of words of the symbol
...
table when the bss is zeroed.
1996-02-22 22:41:31 +00:00
80684b67bc
Fixed registration of the symbol table.
1996-02-22 22:38:48 +00:00
6a3087958a
Add #ifdef _LOCORE round delay() prototype and move DELAY macro
...
to param.h as well.
1996-02-22 22:21:55 +00:00
2f3ad94f8d
An #ifndef _LOCORE to make this file safe to include in locore.s.
...
Introduce a couple of `CPU-type' helper macros to reduce the preprocessor
tangos in many a source file.
1996-02-22 21:59:08 +00:00
db7d722c4b
A bit of reshuffling. Also some stricter prototyping.
1996-02-22 21:07:05 +00:00
f7dff866af
Remove VAX-specific register reference from comment (closes PR 1481)
1996-02-22 20:30:16 +00:00
9777b1173f
Thought I had already removed this ... Junk file that got checked in
...
due to finger trouble.
1996-02-22 17:46:24 +00:00
e259a02425
Correct some prototypes.
1996-02-22 15:04:07 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
a56b76451d
add M_AFS
1996-02-22 12:47:33 +00:00
c9dfd5cb44
First bunch of changes due to stricter prototype checking.
1996-02-22 10:10:44 +00:00
c86505a6a5
If we get a transfer with the SCSI_POLL flag set, don't use DVMA. We
...
only get these during autoconfiguration and during crash dumps. During
autoconfiguration, the transfers are small enough that DVMA won't be used
anyway. However, using DVMA during a crash dump can be dangerous,
depending on the nature of the panic, so we avoid it.
1996-02-22 07:25:05 +00:00
2f132eb5e7
Bring in Gordon's fix from the sun3 port:
...
Correct the DMA transfer count when the target disconnects before
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 07:14:53 +00:00
a246f6c835
Fixup some RCS ids.
1996-02-22 06:50:49 +00:00
3ec5928403
Keep the terminal count information around, as it's self-clearing.
1996-02-22 06:21:48 +00:00
5be12dbfc8
Move the speaker driver to 'new' config. (Closes PR 1361, from Rafal Boni)
1996-02-22 05:53:16 +00:00
012b23ca17
fix a trace message
1996-02-22 04:06:03 +00:00
3700dbe324
Correct the DMA transfer count when the target disconnects before
...
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 03:22:52 +00:00
a19a024e59
Do not mark target/LUN busy until we commit to working with it,
...
after the check for reselections. (From Matthias Pfaller, PR 2105)
Also improve the selection code WRT concurrent reselection.
1996-02-22 03:10:47 +00:00
89179744bd
Use unsigned variables to calibrate delay_factor.
1996-02-22 02:04:14 +00:00
17de1d7eae
Close PR/2105: if.c does not compile without COMPAT_43 due to missing casts.
1996-02-21 14:28:33 +00:00
66fedbbe19
Correct format in a printf().
1996-02-21 10:21:14 +00:00
f63dd5fef2
sync with sparc version:
...
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:40:39 +00:00
adeed1d823
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:36:51 +00:00
c9a23604b9
fourth argument to kern_sysctl() must be a size_t *. simply passing a pointer
...
to SCARG(uap, len) won't do, because that'd be an int *. copy the value
into a size_t, and pass pointer to that.
1996-02-21 00:10:59 +00:00
9c95634273
in mfs_print: mfs_baseoff is a pointer, should be printed as %p, and
...
should NOT be cast to unsigned int.
1996-02-21 00:06:45 +00:00
c0cdc0cf04
when printing data modified on the free list:
...
(1) do not cast it to (void *), and
(2) print it as 0x%x, rather than %p.
This is not perfect (because the data being printed is "int32_t"-sized), but
is more correct than printing it as a pointer because the data is _not_ a
pointer, it is data to be printed in hex, and on some systems, pointers are
wider than the data items being printed, which leads to excess and misleading
output. The only 'right' solution to this is to have a printf specifier
that prints the fixed-sized types the right way, and that's not really
practical.
1996-02-20 23:56:16 +00:00
e98dc62664
Third argument to VOP_PATHCONF is a register_t *, and register_t may be
...
different than 'int'. Do the right thing when declaring variables which
are used this way.
1996-02-20 23:45:10 +00:00
9daf57454e
use phys_map for DVMA like the sparc
1996-02-20 22:05:32 +00:00
dfdd60a3d1
keep static symbols
1996-02-20 22:03:56 +00:00
b80de84521
kill SCSIDEBUG
1996-02-20 22:03:20 +00:00
a35f0ac985
Add more debugging code.
1996-02-20 12:13:09 +00:00
947cae817e
Do not allow the gain to be changed on an original SoundBlaster.
1996-02-20 11:48:50 +00:00
d1b5c90fd6
Check for errors while changing gain.
1996-02-20 11:47:22 +00:00
015ee926f6
Fix mono volume adjustment.
1996-02-20 11:15:15 +00:00
5f732f379e
Trivial (and probably not very good) implementation of SIGIO.
1996-02-20 10:00:31 +00:00
b5f3c5cbdc
XXX This is a kluge.
...
Check to see if the DMA transfer is finished; if not, don't do interrupt
processing.
1996-02-20 04:19:24 +00:00
4d6412e7bf
Move the terminal count check into a separate function.
1996-02-20 04:17:05 +00:00
e3e5c394ae
Oh. Now that size is unsigned, (size >= 0) is always true.
1996-02-20 02:42:55 +00:00
5fd93a11ca
Clear interrupt before enabling in calibrate_delay() (from John P. Wittkoski)
1996-02-19 21:40:48 +00:00
bd06e49fd9
Remove ns_cksum.c; I'll send mail to portmasters about it.
1996-02-19 21:29:44 +00:00
cd5249589d
if_ep.c: Recognize 3c595
1996-02-19 20:18:40 +00:00
c456eaedc6
pcidevs was changed.
1996-02-19 20:09:24 +00:00
b6e5342075
Add 3c595 id
1996-02-19 20:08:25 +00:00
98a0e7986a
Bitfields are usually implemented in natural bit order. Pointed
...
out by Masaru Oki <oki@yk.rim.or.jp>
1996-02-19 18:29:04 +00:00
9bfd34f41e
Adapt to NFSv3.
1996-02-19 15:41:38 +00:00
5021ab87f1
Update copyright notice.
1996-02-19 15:23:25 +00:00
5bc567b0d3
Set IER_ETXRDY before outputting any bytes, to prevent race condition.
1996-02-19 15:09:25 +00:00
c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
b9de283ae6
Fix typo; pointed out by jtk.
1996-02-19 10:30:09 +00:00
9b46365465
Adapt to changed kernel data structures (PR#2100).
1996-02-19 09:46:32 +00:00
dc321cad51
New disklabel handling code (Waldi Ravens).
...
These are the final (?) modifications to the layout of the NetBSD/Atari
bootblock. The bootblock handling can be made backwards compatible using
the right config options (COMPAT_11 + DISKLABEL_AHDI).
1996-02-19 09:05:31 +00:00
8fe7b2bbb7
Be a bit more careful when setting up the timer for calibrating delay().
1996-02-19 05:20:54 +00:00
ce56580f30
Attach should get unit from _dev.dv_unit not sc_unit
1996-02-19 04:36:13 +00:00
e9d6e59c62
Fix two bugs found by Bill Studenmund:
...
Driver can not use tp->t_sc for its own purposes
Attach should take the unit number from _dev.dv_unit
1996-02-19 04:34:01 +00:00
ab3f741911
Update to latest Atari driver, but with some local modifications.
1996-02-19 02:51:03 +00:00
a9012450ec
Fix bug in bwtwounblank() ... didn't have code to enable video on sun4/200
...
obio framebuffer. Noticed when my 4/260 dropped into DDB and the screen
didn't unblank. Pull all of the video enable/disable into functions so
this mishap doesn't happen again.
1996-02-19 00:15:46 +00:00
91e913b297
Handle EOF a little differently.
1996-02-19 00:06:07 +00:00
c5326f656e
Change variable name to avoid GCC warning.
1996-02-18 23:21:48 +00:00
2b9c3e10b9
Add SCSI scanner device.
1996-02-18 22:57:54 +00:00
8d110517c8
We no longer need the old hack for allocating the u-area on the i386.
1996-02-18 22:53:43 +00:00
f9596bfc43
Use the same timing hacks as in pccons for the keyboard.
1996-02-18 22:49:12 +00:00
0e335a2150
Move the DDB initialization later.
1996-02-18 22:44:27 +00:00
760b34026c
Declare a variable...
1996-02-18 22:19:44 +00:00
ba2ac1b587
Clean this up a bit.
1996-02-18 22:17:37 +00:00
2dfda50bb9
Minor tweak; make sure window size is 0 on close.
1996-02-18 20:44:40 +00:00
8f0f40e8b3
Missed some prototyping foo.
1996-02-18 20:41:18 +00:00
342c383728
Truncate to the window size in ssminphys(), not ssread().
1996-02-18 20:38:44 +00:00
294879d4ee
Add SCSI scanner support by Kenneth Stailey and Joachim Koenig-Baltes,
...
hacked a bit. Needs more work.
1996-02-18 20:32:40 +00:00
23726708b0
Minor change.
1996-02-18 20:30:53 +00:00
b2cc81b8fe
Fix PR/2095 options MROUTING did not compile.
1996-02-18 18:58:32 +00:00
47286969ae
Add bass/treble input filter adjustment controls to SB (Pro) driver
1996-02-18 16:36:44 +00:00
a5ea7547d2
Correct timetochip() prototype.
...
Cleanup microtime() a bit.
1996-02-18 15:38:41 +00:00
9e2cbae0ea
Adapt compat NFS mount code to NFSv3.
1996-02-18 14:46:25 +00:00
e9788cf246
Fix a missing 'error =' before 'if (error)'.
1996-02-18 14:06:50 +00:00
d1bae2700f
Add the obligatory copyright notice.
1996-02-18 13:01:05 +00:00
56a654e17f
Changes for NVSv3 code: pull in more NFS include files into kern_time.c
...
to get types right (overkill for just one function call, but oh well).
Clear B_NEEDCOMMIT in bdwrite().
1996-02-18 11:57:06 +00:00
8514e928bd
Changes for NFSv3 merge: change NFS mount arguments and add B_NEEDCOMMIT
1996-02-18 11:55:45 +00:00
5ac7df1caf
Bring in a merge of Rick Macklem's NFSv3 code from Lite2
1996-02-18 11:53:36 +00:00
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
6c52b1a5eb
Fixed bug I introduced in the previous changes. In the ctlinput functions,
...
I used the void * arg, instead of the sockaddr argument...
1996-02-18 05:42:59 +00:00
e8aa4c9806
fix stray MOUNT_UFS -> MOUNT_FFS
1996-02-17 23:08:36 +00:00
2efbb04ae0
Make delay() match prototype.
1996-02-17 19:23:03 +00:00
aeaef139aa
Console TU58 device driver for 11/750 added.
...
It cannot write tapes yes, but reading works OK.
1996-02-17 18:48:53 +00:00
90b84d2da5
Add standalone driver for TU58 (DECtape II). Now initial installation
...
from TU58 on 11/750 is possible.
Change types on pte pointers, due to the change of pte's from
int to struct pte.
1996-02-17 18:23:18 +00:00
5025b0f9c9
Definition file for RSP (Radial Serial Protocol) used by DECtape II.
1996-02-17 18:14:50 +00:00
45eee6c55b
remove #ifdef notdef made unnecessary by previous changes (PR#1597)
...
put in missing "if (error)" that caused tape IO to always fail.
(closes PR#2086)
1996-02-17 16:00:22 +00:00
f851e3e8b3
Move spl stuff from param.h to psl.h. Prototype delay() in param.h.
1996-02-17 14:50:40 +00:00
08fa33d37f
struct ifaliasreq: adapt nomenclature to protocol specific counterparts, ie.
...
swap `ifra_broadaddr' and `ifra_dstaddr'.
1996-02-17 12:32:50 +00:00
1a62c0b31b
delay() takes an unsigned int; get the code to match.
1996-02-17 09:47:48 +00:00
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
03f1e1432a
fix compile error from gusprobe() cleanup
1996-02-17 04:49:50 +00:00
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
28feffd508
avoid panic'ing when driver gets confused--just spit out a message and
...
keep going.
Improve error messages to include device name.
use STATIC for function declarations/definitions so it's easier to get a
useful symbol table by flipping a switch.
1996-02-17 03:35:22 +00:00
4f3fc10939
Fix PR#2060 (add AUDIO_PERROR ioctl to query # of playback drops), also
...
fix semantics of AUDIO_WERROR (now returns a count).
Also repair audio driver back to "real-time mode" where user must
provide data quickly enough for real time audio or silence is played
until user catches up. Add optional "play all" mode (additional bit in
mode field) to play all samples provided, with silence when needed to
avoid buffer underrun.
1996-02-17 02:28:56 +00:00
1caa80a432
Bring prototypes into scope.
...
Fix a few bogus `return's.
1996-02-17 00:03:17 +00:00
b3547c4296
New handlers for kernel trace and breakpoint traps. These allow
...
the kernel debugger (ddb or kgdb) to play with the stack pointer.
1996-02-16 23:36:52 +00:00
7dff812d6e
prototype fixes
1996-02-16 23:32:00 +00:00
bfad88d38d
Added prototype declaration of delay().
1996-02-16 23:29:45 +00:00
f1518de67c
delay() prototype.
1996-02-16 22:13:34 +00:00
cdb37b19d3
Account for the fact that `clockreg' might not be page-aligned.
...
Misc prototype goo.
1996-02-16 22:12:13 +00:00
c59b002704
Sync. with sparc version, and fix some cosmetic nits...
1996-02-16 20:36:11 +00:00
9433112204
Have <sys/param.h> so no need for <sys/types.h>
1996-02-16 20:33:27 +00:00
1c0f939eba
Fix comment
1996-02-16 20:18:51 +00:00
b49f01b2ce
Fix comments
1996-02-16 20:17:58 +00:00
7b4335f9db
Moved functions for debugger memory access to db_memrw.c
...
so they can be pulled in for either ddb and/or kgdb.
1996-02-16 20:08:44 +00:00
5cb4cacff1
Add some things needed by KGDB
1996-02-16 20:04:36 +00:00
49b1d84e94
Resurrecting db_memrw.c to hold some code shared by ddb and kgdb.
1996-02-16 19:11:27 +00:00
5404ccfbd7
Improved delay() implementation with lower overhead,
...
makes very short delays much more accurate.
1996-02-16 18:06:11 +00:00
bcfac202c8
No longer need delay2us(), just use delay(2)
1996-02-16 18:00:33 +00:00
510218d471
Make delay() prototype into a comment.
1996-02-16 17:25:46 +00:00
04ff35d122
Add stub for nfs_boot_getfh if NETHER==0
1996-02-16 15:18:19 +00:00
7847c9efee
Various:
...
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
19f59bf3c2
Prototype the probe and attach functions.
1996-02-16 08:18:32 +00:00
9cbadb3ec2
Remove incorrect comment. From Mike Long, PR 1277.
1996-02-16 08:12:33 +00:00
7af4edd731
Various, including:
...
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
8ba7909bb4
Eliminate sc_silence, and handle output interrupts somewhat differently.
...
From John Kohl, slightly edited.
1996-02-16 02:25:43 +00:00
7e24291099
Protect include in lfs_cksum.c so that it can be used by userland programs.
1996-02-16 02:22:05 +00:00
f741f471f6
Added new routine for polling the keyboard.
1996-02-15 23:24:44 +00:00
7e883ebf5b
Fixed kernel panic when the debugger called cngetc().
1996-02-15 22:54:45 +00:00
23d71d4d59
Fixed undefined instruction handler chaining. The FPE will now correctly
...
pass on an undefined instruction if it was not an FP instruction.
1996-02-15 22:45:21 +00:00
ab9201ff05
Replacement for armfpe.c. This is much nicer.
1996-02-15 22:44:31 +00:00
1f4ced2016
armfpe.c was messy. Removing it in and replacing its function with
...
armfpe.s
1996-02-15 22:42:17 +00:00
b5acab13ca
Added files for machine specific debugger code
...
armfpe.c replaced with armfpe.s
1996-02-15 22:40:08 +00:00
6f2a81d3e1
Initial commit of the machine dependant in-kernel debugger code.
1996-02-15 22:37:13 +00:00
63b7c56cb6
Added setjmp and longjmp routines for the debugger.
1996-02-15 22:15:21 +00:00
b5a6e0bbf9
Added initialisation hooks for DDB.
1996-02-15 22:07:11 +00:00
443bbc1025
Fixed disassembly of LDR & STR instructions, shifts by a register are
...
not allowed and count as undefined instructions.
1996-02-15 22:05:20 +00:00
f69e31fcc1
Initial commit of the machine specific header for the in-kernel
...
debugger.
1996-02-15 21:54:30 +00:00
f134e05316
Fixed performance problems caused by the ring buffer becoming flodded when
...
multiple packets were being received due to not flushing newly received
packets from the ring buffer between receiving an interupt and pulling
in the packets.
1996-02-15 21:48:59 +00:00
5ef42fccf7
Removed debug printing from lpt interrupt routine.
1996-02-15 21:33:52 +00:00
a3a96d6af3
Another tweek to support libcompat.
1996-02-15 20:19:48 +00:00
ab3b20faba
Remove the compile-time conditionalization for either CFB or SFB,
...
based on "#ifdef MELLON": examine the framebuffer dimensions in the
fb softc, and initialize the x-axis offset appropriately.
User-level changes to (e.g.) an Xserver are still needed to work
on an SFB.
1996-02-15 19:18:22 +00:00
d25690e30a
Propagate changes from cfb driver to not require "needs-count" to other
...
pmax framebuffer drivers.
1996-02-15 19:13:08 +00:00
2afc843cce
change _insque and _remque to match the prototypes in sys/systm.h.
1996-02-15 08:39:27 +00:00
5e7b18feac
Catch up with changes in the libkern and libcompat get $S ...
...
Comment out ns_cksum.c.
1996-02-15 08:37:56 +00:00
fce99a5188
Add disk related prototypes.
1996-02-14 21:49:49 +00:00
0bc63f486d
scsi prototypes
1996-02-14 21:46:52 +00:00
1c2a80cfe3
add another missing prototype with TPCONS is not defined.
1996-02-14 21:32:37 +00:00
64a13b9a7b
Remove ns_cksum.c (now in sys/conf/files)
1996-02-14 15:59:57 +00:00
946dc72362
Get d_npartitions right.
1996-02-14 14:20:54 +00:00
7992289e54
Fix unterminated comment.
1996-02-14 08:10:51 +00:00
2708c1593e
Oops, should have been updated in conjunction with ncr5380.c .
1996-02-14 08:09:47 +00:00
ef9b75f679
HZ used to be in Makefile.mac68k... It is 60 on the mac, not 100.
1996-02-14 04:26:38 +00:00
94ca9f6aa0
New interrupt handling code. Highlights:
...
- Interrupt service routines now take a pointer to
the device's softc, rather than a unit number.
- Interrupt handling code in locore.s condensed. Only
remaining "special" handlers are lev0 (spurious),
lev1 (HIL; don't ask), lev6 (clock), and lev7 (NMI).
Only remaining hard-coded device driver reference in
locore is HIL. (clock doesn't count...)
- "dcafastservice" eliminated. DCA driver has new mechanism
to guarantee prompt interrupt service at any ipl (not
just level 5).
- Interrupt code pulled out of autoconf.c and machdep.c and
placed in new file, isr.c
1996-02-14 02:56:38 +00:00
d6f4511690
All interrupt routines (except the HIL; don't ask) now take a pointer
...
to a softc, rather than a unit number. Add a "dq_softc" member
to struct devqueue; this is a temporary measure until the
dma/controller/device callback spaghetti is untangled.
YAY! No more need for dcafastservice!
HIL: squish instances of "(void) splhil()" and "(void) spl0();".
1996-02-14 02:43:54 +00:00
c88b047836
Compile the new interrupt handling code.
1996-02-14 02:33:25 +00:00
da1402dcb7
Eliminate <setjmp.h>.
1996-02-14 01:03:17 +00:00
fe9d17199a
If `cold' simply halt the machine in boot(). Note, this still leaves a window
...
where vfs_shutdown() and sync() can be called prematurely.
1996-02-13 23:59:02 +00:00
1cb0b13391
Add declaration of strncasecmp.
1996-02-13 23:48:26 +00:00
14d9cd33af
netinet prototypes
1996-02-13 23:40:59 +00:00
6de3d0fb2e
Replaced missing $ on one of the mkdep lines.
1996-02-13 23:29:14 +00:00
54bd5c6954
Fix ANSI prototype goof (from Openbsd).
...
Add explicit return type to most functions.
V3 PROM console support.
1996-02-13 22:49:48 +00:00
773f74b60d
Change some caddr_t's to void *'s.
1996-02-13 22:43:33 +00:00
58cd67c20d
Make sure we assign a value to variables we use.
...
Don't express size of NVRAM in terms of machine page size.
1996-02-13 22:38:25 +00:00
f0684ee41d
netns prototypes
1996-02-13 22:13:43 +00:00
2d4af9a7f8
netiso prototypes and fixes to get -DTUBA to compile.
1996-02-13 22:07:57 +00:00
0c7d098c3b
netccitt prototypes
1996-02-13 22:04:21 +00:00
206e75c6f1
Net prototypes
1996-02-13 21:59:53 +00:00
20df3b41ab
uipc_proto.c: No need for the forward decls anymore; everything is prototyped.
...
kern_time.c: add header to get the NFS prototypes if needed.
1996-02-13 21:10:43 +00:00
b0228bc325
- conf.h: add missing prototype for iszerodev()
...
- protosw.h: Prototypes for the protocol stack.
1996-02-13 21:08:50 +00:00
8b686f43c0
machdep.c
1996-02-13 19:40:22 +00:00
243011c19d
pass correct type to setjmp
1996-02-13 19:39:08 +00:00
a5c3ac2538
Allocate a single static colourmap array for aglass-tty consle
...
framebuffer and malloc() all others. Remove old-config unit-number checks.
This driver no longer requires the "needs_count" flag.
1996-02-13 18:27:28 +00:00
1c03bcb897
Finish converting MAXINE dtop driver to use new-style config.
...
The dtop driver no longer requires the "needs-count" flag.
Fix a panic in boot-time interrupt establish. The "generic" pmax
interrupt-establish code assumes that all interrupt args are new-config
device structs accessed via a struct cfdriver. Make it so.
1996-02-13 18:23:46 +00:00
9d2186505e
Use vprintf where it was intended, and use __dead
1996-02-13 18:06:10 +00:00
b29ca3a272
Do the RPC to bootparamd a little later (just before the mountd call)
...
so that we do not ask for the "swap" path when swapping on disk.
1996-02-13 17:53:32 +00:00
2395bee98d
Much faster copyin/copyout subroutines, written by Ken Wellsch.
...
Improved user-space network I/O (like ftp) with about 1.7 times!
1996-02-13 17:45:32 +00:00
eebcc06b89
eliminate setjmp.h
1996-02-13 17:39:01 +00:00
15dae05834
Oops, label_t does not have implicit pointer type like jmp_buf
1996-02-13 17:34:46 +00:00
89c2f6dc04
now in sys/dev
1996-02-13 17:29:15 +00:00
9e07977e11
no longer useful
1996-02-13 17:27:41 +00:00
8a8e1a4d94
caddt_t -> caddr_t
1996-02-13 17:13:22 +00:00
4fd36944c1
add ns_cksum.c; netns will not link without it.
1996-02-13 17:09:46 +00:00
216907979a
add 2 missing fwd struct declarations
1996-02-13 17:06:52 +00:00
43854c5755
compiler warning police
1996-02-13 17:05:47 +00:00
cbb1d18e70
- Fix setcxsegmap prototype.
...
- Cast ?TO? macros to NULL to avoid compiler warnings
1996-02-13 17:04:58 +00:00
183aec8fa8
GC *_nullop(). Minor nits.
1996-02-13 13:12:48 +00:00
5953a056eb
GC dead_nullop().
1996-02-13 13:02:40 +00:00
27a9f5bd9c
Fix #include syntax.
1996-02-13 06:56:58 +00:00
e2c2c98181
di_size is a quad and needs %qu not %lu
1996-02-12 22:08:47 +00:00
c048d7ba68
fix a printf warning and add pmap_page_index declaration
1996-02-12 21:51:52 +00:00
b3666297b1
Oops, meant to delete the declaration completely.
1996-02-12 21:28:18 +00:00
a9996b4780
pmap_page_index returns int
1996-02-12 21:27:32 +00:00
3306495d82
delete pmap_page_index declaration; now in <vm/pmap.h>
1996-02-12 21:25:18 +00:00
44aab5f4d3
make pmap_page_index return int
1996-02-12 21:21:15 +00:00
bf49f190a7
change pmap_page_index to return int
1996-02-12 21:19:13 +00:00
967dc9fa87
make pmap_page_index return int instead of u_long
1996-02-12 21:15:37 +00:00
4d234d08d8
Move pmap_page_index declaration to <vm/pmap.h>
1996-02-12 21:12:29 +00:00
47058c3660
make pmap_page_index() return a signed int.
1996-02-12 21:11:20 +00:00
3237aa23d2
Avoid compiler warning.
1996-02-12 21:05:18 +00:00
d5ddbf99ab
Separate DMA and SCSI routines more.
1996-02-12 15:59:51 +00:00
11e9f2ce94
Add fwd declaration for struct ucred
1996-02-12 15:20:12 +00:00
19dc07be15
close PR/2063: procfs_rw prototyped twice with different prototypes
1996-02-12 15:01:41 +00:00
2e06ee143c
Avoid 3/50 H/W bug (I hope)
1996-02-12 05:19:09 +00:00
c0a9716f6e
Fix address wrap in bus_mapin
1996-02-12 05:14:19 +00:00
f331e77b53
Deal correctly with boundary between 12 bit and 16 bit cluster numbers
1996-02-11 22:48:14 +00:00
9401e46ed0
Change readdisklabel to check block 0 of the disk for a Macintosh magic
...
number before attempting to load the Macintosh partition info. If the
first 32-bits of block 0 contain the BSD disklable magic number, treat
it as a NetBSD disklabel.
When loading the Macintosh partition map, check the first 32 partitions
for the root, usr, and swap partitions--instead of the first 8. Still
only allows 8 total partitions for NetBSD use.
1996-02-11 22:31:47 +00:00
91bd533c48
Avoid deref'ing a bad pointer in ccdopen(). This could happen if
...
any partition other than RAW_PART is opened before configuring the
ccd. Bug pointed out by Matthew Green.
1996-02-11 18:04:01 +00:00
d03a91c75f
KNF-ified by Scott Reynolds a long time ago.
1996-02-11 15:23:19 +00:00
183d234ae4
Add prototypes.
1996-02-11 13:47:55 +00:00
4cafd3d7d2
PAGE_SIZE should be PAGE_SHIFT. Really ugly bug!
1996-02-11 13:46:23 +00:00
26d151d2bb
Prototype for delay().
1996-02-11 13:45:37 +00:00
dfecf19e9f
Fix cpu_sysctl() arguments to be like prototype.
1996-02-11 13:43:37 +00:00
550f120337
Fix things that -O2 broke. Cleanup.
1996-02-11 13:41:35 +00:00
bb75a13fbb
Cleanup & convert to KNF.
1996-02-11 13:39:54 +00:00
998626f339
Add VAX650, mba, hp, ts. Change uba to be *'ed.
1996-02-11 13:28:25 +00:00
29719357a6
Remove csralloc(), not usable anymore.
...
Add ubasetvec() to steal interrupt vectors for device drivers that
need more than one vector. Add prototype for it.
1996-02-11 13:24:50 +00:00
d2dadd65df
register -> volatile in some places, to make it work OK with -O2.
1996-02-11 13:22:30 +00:00
435182d4bb
Device drivers for massbus adapters and massbus disks.
...
Works with RP04/05/06/07 disks.
1996-02-11 13:19:33 +00:00
35d120d71d
Some extra range-tests on the RTC values.
1996-02-11 12:42:19 +00:00
2bbdc4b9c7
Be a bit more carefull when accessing the proc structure on a kernel buserror.
1996-02-11 12:41:25 +00:00
a43eb3baa6
Fix v_putc() conflict with the declaration in <sys/systm.h>: remove the
...
v_putc() declaration and assignment to a temp pointer. The rcons console
initialization longer requires that hack.
1996-02-11 07:14:58 +00:00
fb9b45b582
put back traditional symlink change that somehow got lost.
1996-02-11 02:06:13 +00:00
4323ae0307
Remove via_inited, as it is unused.
1996-02-11 01:20:46 +00:00
6945798b81
Correct ROM vectors for the LC 475.
1996-02-11 01:20:37 +00:00
ffc19f58b0
Back out last change. Bad karma to initialize the VIA that early.
1996-02-11 01:20:23 +00:00
0ae8a51904
PETE was pretty useless; SPOT is my own machine, and will better
...
reflect the status of sbc driver configuration.
1996-02-11 00:17:13 +00:00
af4f29bcb3
Identical to GENERIC, but uses the `sbc' driver.
1996-02-10 23:42:31 +00:00
ed73ac3b48
New SCSI driver for Macintosh II family machines, implemented using
...
the MI 5380 driver. It has been verified to work on the IIx, IIsi,
and IIci only, but should work with any Macintosh 5380-based SCSI
controller.
- This driver is _not_ intended to be a general purpose replacement
for the `ncrscsi' driver. It is an alternative for those having
problems with that driver.
- Disconnect/reselect doesn't (yet) work, so don't expect SCSI tape
or magneto-optical disk drives to function properly.
1996-02-10 23:28:41 +00:00
01c43471b9
Make a message more verbose for folks who try to boot in 24-bit mode.
1996-02-10 23:12:46 +00:00
b153275d13
Don't return EBADRPC if we have something else.
1996-02-10 22:55:16 +00:00
fb81581990
detatch this spelling mistake from this source file.
1996-02-10 22:27:22 +00:00
8d7918526b
Various small fixes.
1996-02-10 22:10:45 +00:00
ee08b72ef4
Hayes ESP register definition
1996-02-10 20:23:40 +00:00
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
8a6ad45eed
In fdcretry(), if we're not using implied seeks, set the state to DOSEEK
...
rather than SEEKCOMPLETE before retrying the operation. If implied seeks
are being used, the state is set to DOIO (no change). This is why I
couldn't reproduce the disk_unbusy() panic on my SS2; it uses implied
seeks. Patch from John F. Woods <jfw@jfwhome.funhouse.com>
1996-02-10 18:37:36 +00:00
d586688437
In fdcretry(), set the state to DOSEEK rather than SEEKCOMPLETE before
...
retrying the operation. Fixes disk_unbusy() imbalance and really seems
like the right thing to do in case it was the seek that failed. Takes
care of PR #1985 . Patch from John F. Woods <jfw@jfwhome.funhouse.com>
1996-02-10 18:31:13 +00:00
47158e6548
syscalls.master changed
1996-02-10 17:14:07 +00:00
eb13d0121e
- fixed wrong argument order in xmknod
...
- added proper support for {f,}pathconf
1996-02-10 17:12:31 +00:00
45aca3f276
fix _insque and _remque declarations
1996-02-10 00:51:52 +00:00
b50214e2fa
use %p in printf's instead of casts to (unsigned int)
1996-02-10 00:48:08 +00:00
3e701ffc5a
Add forward decls.
1996-02-10 00:44:18 +00:00
2f1e5a946a
Another typo.
1996-02-10 00:33:53 +00:00
d0fd3d7e62
Don't declare pmap_page_index for now. It will break the arm port.
...
This clearly needs to be fixed. I would like to declare it:
__pure u_int pmap_page_index __P((vm_offset_t));
but at least the arm port wants it signed [since it tests for -1 all over
the place]. Can we have this fixed please?
1996-02-10 00:30:39 +00:00
b7b8db60ac
change pmap_page_index to return __pure u_int, like in the majority of
...
the ports
1996-02-10 00:20:09 +00:00
e9aa96b9ad
Follow Charles' advise about the location of some of the prototypes.
1996-02-10 00:13:25 +00:00
647dfa216e
Don't declare MSG_COMPAT in two places.
...
More prototype fixes
1996-02-10 00:12:44 +00:00
30c34c327f
vnd.c: Typo (disk_deta{t,}ch) It was detach in the header file and
...
detatch everywhere else. Reverted to the english spelling.
Also fixed the rest of the prototype warnings while I was at it.
ic/ncr5380sbc.c: Don't declare Debugger()... I have to clean this
everywhere :-(
1996-02-10 00:11:44 +00:00
03b1ad4cb4
One more cleanup pass to change %x to %p for pointers
1996-02-10 00:07:59 +00:00
9fe380e1ab
cross that t and dot that i. Typo in last commit.
1996-02-09 23:30:19 +00:00
c6edd77b23
A few prototype fixes
1996-02-09 23:14:14 +00:00
1b17f25866
fix prototype warnings
1996-02-09 23:12:14 +00:00
631ccba638
miscfs prototype changes
1996-02-09 22:39:56 +00:00
273fa18bff
ufs prototype changes
1996-02-09 22:36:00 +00:00
573481f5fc
mfs prototypes
1996-02-09 22:31:27 +00:00
thorpej