mrg
53fa9da4df
move zs_attach() to after the setting of the console device, to avoid
...
having cn_dev being 0 and thus cnopen() being called recursively. this
fixes this problem for zs-based console's only.
2000-05-17 09:28:22 +00:00
mrg
651712a140
add a note about US IIi and PCI_INTERRUPT_LINE register
2000-05-17 09:25:58 +00:00
mrg
6dad37e26a
expand a comment slightly.
2000-05-17 09:25:27 +00:00
mrg
f2a19f58b5
fix || vs. && bug, and clean up some cruft.
2000-05-17 09:16:44 +00:00
mrg
0eeab9735f
fix another warning.
2000-05-17 09:12:10 +00:00
shin
5eacd822a1
delete undefined 'NEC_MCR_4XX'.
2000-05-17 08:38:25 +00:00
eeh
3b90b5c5c4
Add support for bus_dma_load_raw() so the le driver will work again.
2000-05-17 02:31:12 +00:00
thorpej
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
jhawk
aa0007b5a5
In case of db_onpanic=0, still drop to ddb if the trap was from within
...
ddb.
i.e. "db> x/s 0x14" should return you to ddb when it faults, regardless
of the state of db_onpanic.
2000-05-15 20:16:48 +00:00
nisimura
66ecdc15d3
Remove unused PSL_USERCLR defines for processor status register.
2000-05-15 08:36:32 +00:00
nisimura
8a71a7a50f
Backout the previous change which was done mistakenly.
2000-05-15 06:45:44 +00:00
nisimura
c7c815f46b
Remove #include <machine/psl.h> which is not used.
2000-05-15 06:39:14 +00:00
itohy
cb3a247145
Use bsd.hostprog.mk to allow ELF target on a.out host.
2000-05-15 05:02:29 +00:00
sato
ab17e681e7
NEC MC-CS LIGHT button.
...
NEC MC-R430 COM0 power.
CASIO E55 COM0 power.
CASIO E55 LIGHT button.
2000-05-15 01:40:44 +00:00
bjh21
950e36ed1f
Don't panic on a segfault, but drop into the debugger if it's there.
...
Not that this helps much, since we immediately panic in cpu_coredump instead.
2000-05-14 22:50:01 +00:00
minoura
6943d5dd19
defopt FPSP.
2000-05-14 14:13:53 +00:00
minoura
879e4dbe7c
defopt FPSP.
2000-05-14 14:13:50 +00:00
minoura
53e627cd0b
MD parts of uvm_pageidlezero.
2000-05-14 14:10:09 +00:00
castor
42ccab0d49
Add fp emulation for sqrt_s and sqrt_d instructions
...
from Jeff Smith <jeffs@geocast.com>. These are needed to support
-mips2 compilation. With this change, on a QED 5231 we now pass the
paranoia tests, and are successfully using userlands built with -mips2.
2000-05-14 06:19:32 +00:00
jhawk
2dc49a4780
Comment out XSERVER and XSERVER_DDB and move them to the pccons-specific
...
section. They are not used with wscons.
2000-05-14 04:36:09 +00:00
shin
f26b6caddd
clear CPU count register interrupt properly (VR4100).
2000-05-14 03:16:11 +00:00
uch
f9b83f27e9
change Telios keyboard map: KS_KP_Enter -> KS_Return
2000-05-13 20:34:13 +00:00
jdolecek
6572f303f4
remove now redundant comment regarding IBM_L40 define
2000-05-13 19:58:41 +00:00
jdolecek
950749ab6f
add special bootblocks for IBM PS/2 - those machines need different gate A20
...
addressing
2000-05-13 19:58:01 +00:00
jhawk
187860f8fb
Fix problem from 1.27, and more long-standing in the commented-out
...
-DSUPPORT_SERIAL options:
Only set -DSUPPORT_SERIAL=CONSDEV_PC for "biosboot" and "biosboot_resetvideo",
but not for biosboot_com0.
2000-05-13 19:03:19 +00:00
bjh21
9f75c038c1
Add vmapbuf/vunmapbuf
2000-05-13 17:57:14 +00:00
bjh21
4b7597ffe5
Handle more cases of existing mappings in pmap_enter
2000-05-13 17:56:32 +00:00
tsutsui
924b1948b4
Replace (non-working) ncr with new siop.
2000-05-13 14:54:51 +00:00
bjh21
e65735cc74
More informative stack backtrace. Prints whole stack frames\!
2000-05-13 14:43:11 +00:00
bjh21
9d61165c26
Oops. Swedish is KB_SV.
2000-05-13 14:40:10 +00:00
bjh21
b85a45b9f1
Move out spurious defines
2000-05-13 12:17:49 +00:00
jhawk
d4091aa02e
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
2000-05-13 05:31:00 +00:00
jhawk
a72e1e9c59
Add support for on-the-fly switching of console devices interactively
...
from the i386 biosboot via the "consdev" command.
2000-05-13 05:25:20 +00:00
jhawk
1dac4cd666
Add support for on-the-fly switching of console devices interactively
...
from biosboot via the "consdev" command.
Move "Press return" printf() out of print_banner() so we can
print_banner() reasonably after switching devices.
2000-05-13 05:23:37 +00:00
uch
62923b307e
fix #define RGB24(r, g, b)
2000-05-13 03:12:56 +00:00
thorpej
26f56b9cab
Only use __builtin_va_alist_t if using GCC 2.96 or later. Fixes
...
pkg/10080, from Matthias Scheler.
2000-05-12 23:49:11 +00:00
bouyer
9c43539f8f
The VIA Technologies VT82C686A SMBus Controller claims to be a PCI/ISA
...
bridge, ignore it. Should fix kern/10093 by Mark Dohring.
2000-05-12 20:31:22 +00:00
uch
f02836787f
fix CLUT index bug.
2000-05-12 18:09:55 +00:00
shin
e38d6212b9
make it compile again with '-Werror'.
2000-05-12 04:43:21 +00:00
jhawk
ed3acc8fbb
zsr has acquired a wi card
2000-05-12 03:14:21 +00:00
drochner
d5d280d015
-attach auxilary PCI buses at the 450NX chipset,
...
tested by hubertf in a small configuration (1 PXB - 2 PCI buses)
-being here, remove the per-VID/DID matching code which was commented
out for a while
2000-05-11 16:44:14 +00:00
jdolecek
8fedbd8497
Add i386-specific part of MicroChannel Architecture bus support, as
...
found in some older IBM PS/2 machines.
This code is based upon work by Scott D. Telford, with some minor bits
in arch/i386/mca/mca_machdep.c taken from FreeBSD.
XXX this is still very experimental and development version; use at your
XXX own risk
2000-05-11 16:38:10 +00:00
jdolecek
6c1643be43
minor adjustment for compiling with IBM_L40
2000-05-11 16:11:54 +00:00
jdolecek
98beeaa61d
add commented out CPPFLAGS+= -DIBM_L40 - needed for PS/2 bootblocks
2000-05-11 16:05:51 +00:00
jhawk
2d2ad4f3e8
fix cosmetic brain-oh in last; s/attachonly/matchonly/g
2000-05-11 15:26:23 +00:00
jhawk
a2606dbe80
Address PR#10042: instead of getting the dynamic configuration
...
all the time (which crashes some vaios), get the static configuration,
and if config_search() finds a node, then do the dynamic configuration.
This seems to work fine on multiple vaios (which seem to crash
in different places...go figure).
Also, bring prototypes in-line with KNF and declare static as appropriate.
"#if 0" out pnpbios_getapmtable() and pnpbios_setnode() as they
are not called.
Fix printf()s to print out dv_xname.
Fix a comment typo.
Use manifest constants (PNP_CF_DEVCONF_DYNAMIC, etc.) in calls to
pnpbios_getnode() instead of hardcoded constants.
2000-05-11 05:54:49 +00:00
uch
742429ff1e
#undef'ed debug routine.
2000-05-10 23:57:13 +00:00
msaitoh
a797322f08
supports single step!
2000-05-10 20:28:33 +00:00
is
8f17fca445
fix tyop
2000-05-10 20:20:21 +00:00
thorpej
c52b8eabae
Make stdarg/varargs work with GCC 2.96.
2000-05-10 17:53:45 +00:00
pk
bde258dc12
bus_dmamem_alloc: round-up `alignment' to a be a multiple of the page size.
2000-05-10 14:27:51 +00:00
pk
fbd2523c70
* Fix thinko in offset computations.
...
* Add DIAGNOSTIC checks.
2000-05-10 11:17:50 +00:00
nisimura
df234d8698
Take a straight way for pagemove() PTE manipulation, abandoning to
...
use MIPS_TBRPL(). When PTEs are modified, both src and dst TLBs
are invalidated. MIPS3 single TLB entry has paired double PTE
and pagemove() likely walks through multiple pages. The positive
effect of of MachTLBUpdate() or TBRPL() is unclear.
2000-05-10 08:55:22 +00:00
nisimura
bd91f6f2e0
Adapt mips_locoresw[].
2000-05-10 01:36:56 +00:00
nisimura
de13b44edd
Have mips_locoresw[] of 3 entry pointer array for different
...
implementation of locore routines between MIPS1 and MIPS3. It's
independent from mips_locore_jumpvec_t which is for cache/TLB
manipulating routines peculiar to processor designs. mips_locore_jumpvec_t
will be replaced with "processor closures" encapsulating implementation
parameters (cpuinfo) and pointers to conventaion routines (cpuops),
eventually.
2000-05-10 01:34:13 +00:00
pk
1bf775b965
Conform bus_dmamem_{alloc,map} usage to bus_dma(9) specs.
2000-05-09 22:42:08 +00:00
pk
2d12c9e33b
The bus_dma(9) implementation now allocates DVMA addresses in
...
bus_dmamap_load_*() routines only. Note that DMA memory buffers
allocated with bus_dmamem_alloc() _must_ be loaded by bus_dmamap_load_raw().
2000-05-09 22:39:35 +00:00
bjh21
6c97e2bd78
Initial commit of arm26 port
2000-05-09 21:55:44 +00:00
ragge
6a36c27519
Get boot device CSR from RPB instead of trying to guess it.
2000-05-09 20:53:51 +00:00
pk
6411be9c63
Include <sparc/sparc/asm.h>, per PR#10082
2000-05-09 20:29:28 +00:00
ragge
94faa6da32
Change copy*str() functions. More paranoid checking of legal address space.
...
Fixes PR#7838.
2000-05-09 18:59:58 +00:00
leo
eeecd4445a
The console stuff might also be needed by 'ser'. Also update the names of
...
the serial ports in the comments.
2000-05-09 14:30:47 +00:00
shin
a7dd7a7c0c
bugfix: make sure there is no valid data in data cache, when last
...
mapping to the physical page is removed (R3000/MIPS1).
delete cache operations in pmap_zero_page_uncached().
2000-05-09 13:40:13 +00:00
shin
8587b62f36
call uvm_pageidlezero() while CPU is idle.
2000-05-09 13:23:57 +00:00
shin
2d39542769
deal with INT_MASK_REAL_DEV removal.
2000-05-09 13:20:55 +00:00
shin
51994cb450
make it compile again (add #include's).
2000-05-09 13:19:54 +00:00
leo
793cd652e3
Add some {u}vm includes for the sake of PHOLD().
2000-05-09 10:29:01 +00:00
uch
86d1ce5fd8
fix WSDISPLAYIO_PUTCMAP return value.
2000-05-09 10:15:17 +00:00
nisimura
34a943161d
Introduce mips3_TBRPL(); not used in this moment, to be useful to
...
discard MachTLBUpdate() calls, however, the necessity of TLB entry
modification in such a way is under question because implementation
glitches on ASID management was straightened, those calls can be
sanely removed after all.
2000-05-09 09:50:17 +00:00
soda
88c52c7335
mention MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV
2000-05-09 07:30:14 +00:00
soda
e06738f06f
back out previous changes as stopgap.
...
arc port still relies on MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV.
(cpu_intr() of arc port should be rewritten completely, but not yet.)
2000-05-09 07:27:04 +00:00
hubertf
9f48bba3ae
Add "install" target, so "make install" after building the kernel
...
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.
2000-05-09 00:56:21 +00:00
thorpej
6a33c86623
HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
...
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.
2000-05-09 00:32:19 +00:00
hubertf
30be57ab7b
Disable DDB_ONPANIC=0. A plain reboot in case of problems isn't really
...
helpful at install times, regarding diagnostics.
2000-05-09 00:28:22 +00:00
uch
7ae9f5b5e9
-G 24 -> -G 20. TX3922 kernel became bigger.
2000-05-08 21:58:40 +00:00
uch
cc01cd2448
implement 8bpp CLUT of Plum2, TX3912 video module.
2000-05-08 21:57:56 +00:00
uch
e5ee37ffd9
add struct hpcfb_accessops to setclut method. TX3912 can't change
...
color map index (R:G:B = 3:3:2), so use this.
2000-05-08 21:56:32 +00:00
ragge
57115228ef
Sorry, no KA680.
2000-05-08 19:46:12 +00:00
ragge
5fc118100e
Add 4000/200 and 4000/500.
2000-05-08 19:09:49 +00:00
ragge
7f9df86ca6
Get correct MAC address out of rom on VAX 4000/200. From Michael Kukat.
2000-05-08 18:51:17 +00:00
ragge
f511619a4f
Some more CPUs... From Michael Kukat.
2000-05-08 18:48:30 +00:00
ragge
282320f7df
Rudimentary CPU support files for VAX 4000/105, 4000/200 and 4000/500.
...
From Michael Kukat.
2000-05-08 18:45:26 +00:00
joda
89ef6f9a91
add viaenv template
2000-05-08 18:41:26 +00:00
thorpej
d611fd596a
Use vprintf() rather than the non-standard %: format.
2000-05-08 18:22:29 +00:00
ragge
aedfd4de1c
VAX 4000/200 support. From Michael Kukat.
2000-05-08 17:53:24 +00:00
ragge
0028464ae3
Add 4000/105 and VXT2000. From Michael Kukat.
2000-05-08 17:49:07 +00:00
ragge
c17aed4bdc
Console support for VXT 2000, VAX 4000/105 and VAX 4000/500.
...
From Michael Kukat.
2000-05-08 17:06:48 +00:00
joda
827056c9c3
add entry for viaenv
2000-05-08 16:42:36 +00:00
augustss
3a6e3a4670
Add (sometimes commented out) MIIVERBOSE option.
2000-05-08 13:49:44 +00:00
mycroft
a7fb64072e
Fix the RCS tag format. Duh.
2000-05-08 03:11:06 +00:00
mycroft
f8e0411615
Make the audioamd assembler code compile again.
2000-05-08 03:09:54 +00:00
mycroft
f5bd37be57
Make the SPARC audioamd driver at least *compile*. Well, the C code, that is.
...
*sigh*
2000-05-08 02:44:31 +00:00
fvdl
5ebece6b49
Use ES to address the partition table when checking if we need to use
...
int13 extensions. Fixes PR 9676.
2000-05-07 22:58:58 +00:00
veego
701eaba273
add the #71 NODEV entry for bktr to the chrtoblktbl list.
2000-05-07 08:32:50 +00:00
wiz
784bcfd6ba
add bktr device
2000-05-07 00:41:06 +00:00
nisimura
d8fe118608
- Remove three unused contants; KERNBASE, KERNTEXTOFF and BTOPKERNBASE.
...
- Protect #include <machine/intr.h> inclusion with #ifdef _KERNEL.
- Correct the case when "opt_gateway.h" is refered.
2000-05-06 05:55:09 +00:00
nisimura
0cb6da487c
Remove unused mapin(pte, v, pfnum, prot) macro.
2000-05-06 05:19:32 +00:00
mrg
0ce52a2a08
implement U2P PCI support in psycho_init. this is completely untested.
2000-05-06 04:15:35 +00:00
hannken
0b2854eb6c
Fix for lint during build of libc.
2000-05-05 20:12:00 +00:00
augustss
e991ee6035
Use correct file name for amd7930.
2000-05-05 14:19:25 +00:00
pk
f622dc8618
Define some more bits in the MXCC control register.
2000-05-05 11:07:15 +00:00
soren
ee733492dd
Add licenses.
2000-05-05 03:27:22 +00:00
soren
95f3c9498d
MIPS_INT_MASK_CLOCK and INT_MASK_REAL_DEV are deprecated.
2000-05-05 03:18:25 +00:00
thorpej
b193ffa77c
Use __GNUC_PREREQ__().
2000-05-05 00:20:22 +00:00
jhawk
c82c8655cf
Add comment suggesting s/com[0-9]/com*/ and s/lpt0/lpt*/
...
if you enable com*/lpt* at pnpbios0, to avoid attaching
com0 as com3.
Don't actually change the "com0 at isa" line, since doing so
would cause some com* (e.g. pcmcia) to be renumbered from com3
to something lower, at least on some systems.
2000-05-04 19:41:44 +00:00
takemura
9601a833c3
Remove wmipsdbg and wmipsrel as well as WMIPSDbg and WMIPSRel for
...
case sensitive file system.
2000-05-04 11:58:22 +00:00
takemura
f056a711d7
Add some lines to support ATAPI and SCSI devices.
...
This makes the kernel 60KB bigger.
2000-05-04 10:32:47 +00:00
takemura
d865561de6
Raw keyboard mode support. I'd tested this on MC/R530.
...
I don't sure if skbd work or not.
2000-05-04 10:25:45 +00:00
takemura
fe8142f713
Raw keyboard mode support. I'd tested this on MC/R530.
...
I don't sure if skbd work or not.
2000-05-04 08:18:59 +00:00
takemura
33698fcc25
Mouse move event should be made before mouse bown event. Without that,
...
you may got a mouse down event in strange plase.
2000-05-04 06:14:05 +00:00
shin
f077f10640
fix scancode -> keycode mappings:
...
MC-CS arrow keys
PV-6000 semicolon and apostrophe
2000-05-04 02:24:13 +00:00
thorpej
d3d81e3ad6
Make varargs and stdarg work with GCC 2.96 and later.
2000-05-03 21:54:06 +00:00
mycroft
468985f608
Adjust asm statement for newer GCCs.
2000-05-03 21:32:59 +00:00
mycroft
f73803d1ce
Fix printf() format.
2000-05-03 20:17:37 +00:00
mycroft
3afc302a93
ctob() -> ptoa(), to fix sign-extension issues when using >2GB. A more
...
comprehensive change will be necessary for >4GB, but that's a bigger issue.
2000-05-03 20:02:08 +00:00
kleink
bd2d21b5d1
Display the VPD's PrintableModel item on startup.
2000-05-03 11:39:54 +00:00
nonaka
ad9dd901f1
mbr partition table parameter is little endian.
...
need to bswap.
2000-05-02 18:19:01 +00:00
nonaka
93f867f485
LABELOFFSET 42 -> 64
2000-05-02 18:13:04 +00:00
nonaka
2ed0c0fe88
add cn_bell to struct consdevs pccons.
2000-05-02 18:11:07 +00:00
uch
89cb6ad8b8
forgot to commit TX3912.
2000-05-02 18:00:54 +00:00
uch
3c873423e1
add ioctl, mmap.
...
hpcfb directly attach to tx3912video and plumvideo. (no longer use bivideo)
XXX CLUT
2000-05-02 17:50:51 +00:00
uch
9dccb575be
change hpfcb_cnattach interface to adopt current implementation.
2000-05-02 17:45:15 +00:00
pk
c49e7076d3
Simplify pmap_page_protect(); modelled after a similar change by
...
Art Grabowski in Openbsd.
2000-05-02 13:06:27 +00:00
augustss
9f9f06401c
Add (commented out) cms(4) driver.
2000-05-02 11:00:56 +00:00
pk
d46e0d77c0
Remove unused code: getptesw4m(),setptesw4m()
2000-05-02 10:35:06 +00:00
augustss
8abcd395fd
Add bba(4) attachment.
2000-05-02 08:04:24 +00:00
augustss
e15d2472fa
Fix typo.
2000-05-02 08:03:53 +00:00
augustss
087a67c892
Add proper bba attachment. From Gregory McGarry <g.mcgarry@ieee.org>
2000-05-02 08:02:07 +00:00
augustss
c6df4d8830
Comment out bba since I don't really know if it's right.
2000-05-02 07:23:56 +00:00
augustss
05ef4c3d35
Add bba(4) attachment at tc.
2000-05-02 07:22:26 +00:00
augustss
621ef4d785
Add am7930 audio driver.
2000-05-02 06:43:05 +00:00
augustss
361f2141f7
Adapt to new am7930 driver. PR 10033 from Gregory McGarry.
2000-05-02 06:35:12 +00:00
thorpej
39f8e55cfc
On the m68k, the most efficient type for __cpu_simple_lock_t is
...
an unsigned char, since that is what the `tas' instruction uses.
While I'm here, implement the __cpu_simple_lock family of routines.
Why? One, because they're easy. Two, so Steve can get master/slave
MVME systems talking across the backplane. :-)
2000-05-02 05:17:45 +00:00
thorpej
855b79db92
Let each platform typedef the new __cpu_simple_lock_t, which should
...
be the most efficient type used for the atomic operations in the
simplelock structure, and should also be __volatile.
2000-05-02 04:41:04 +00:00
pk
91ec70f36d
- De-inline VA2PA(); it isn't in any time-critical path. Saves a bunch of space.
...
- Disable special-cased viking cache flushing in setpgt4m(). This work-around
should no longer be necessary.
- Remove some misc. dead code.
2000-05-01 15:19:46 +00:00
pk
d4ac7f24ca
Implement HyperSPARC specific pmap_{zero,copy}_page functions.
2000-05-01 14:06:41 +00:00
pk
784c538c3f
Add definitions of HyperSPARC block fill/copy ASIs.
2000-05-01 14:05:53 +00:00
ragge
8ddd256f57
Call uvm_pageidlezero() in idle loop.
2000-05-01 12:11:50 +00:00
ragge
a5a1a12d83
#define __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED.
2000-05-01 12:09:32 +00:00
kleink
0344f24921
Like, really block soft clock interrupts.
2000-05-01 10:52:29 +00:00
kleink
2c9e3487e0
Bump default data size to 32 MB.
2000-05-01 10:43:42 +00:00
takemura
6bd45ff6c3
We should not report button down event while we don't know where it occur.
2000-05-01 07:40:05 +00:00
thorpej
a2edf1690f
Fix a declaration inside __ldstub().
2000-05-01 00:46:29 +00:00
soren
e038e8aac1
No need for flushing the cache after zeroing a page uncached.
2000-04-30 23:30:47 +00:00
simonb
21666d1ea5
Only call uvm_pageidlezero() if uvm.page_idle_zero is set.
2000-04-30 23:01:24 +00:00
simonb
0ba4762798
Define offset for uvm.page_idle_zero.
2000-04-30 22:56:12 +00:00
pk
e327115496
FIx declaration in __ldstub.
2000-04-30 22:15:30 +00:00
augustss
4a30060c43
Add C-Media CMI8x38, cmpci.
2000-04-30 22:00:54 +00:00
pk
6832a2d6c9
Arrange to call uvm_pageidlezero() from idle loop.
2000-04-30 21:32:44 +00:00
pk
88fc960805
Define offset for uvm.page_idle_zero.
2000-04-30 21:29:16 +00:00
pk
1b8cac1bd9
Implement MXCC versions for pmap_{zero,copy}_page().
2000-04-30 21:22:28 +00:00
pk
78391926bf
Allow for CPU specific page clear and page copy functions.
2000-04-30 21:09:43 +00:00
dante
d7592a72fe
Update comment in adw*
2000-04-30 19:08:19 +00:00
uch
77e7c7ee2c
skbd_ioctl (not implemented yet) returns -1 not 0.
2000-04-30 18:43:37 +00:00
minoura
a8580db029
Revert 1.18 change.
...
Hopefully this is a temporary fix; something might be missing in
the SCSI negotiation.
2000-04-30 16:06:20 +00:00
pk
99ef6f17b5
Remove not-so-useful `#if DEBUG' code.
2000-04-30 14:23:29 +00:00
pk
3c5ac0b689
Rename MXCC control register.
2000-04-30 14:19:37 +00:00
pk
7373241c4c
Rename MXCC control register.
...
Add MXCC stream register definitions.
2000-04-30 14:18:52 +00:00
ragge
c7204b15d4
Ubareset() changed.
2000-04-30 11:47:21 +00:00
mycroft
26d692df9e
Use DHCP, not BOOTP. At least with dhcpd, the root path gets dropped due to
...
lack of space in the reply when using BOOTP.
2000-04-29 22:18:31 +00:00
soren
1e0aa36da8
ECOFF hook is in arch/mips.
2000-04-29 21:47:59 +00:00
soren
f820567ce2
Allow non-pmax to use COMPAT_ULTRIX.
2000-04-29 21:47:13 +00:00
soren
a1bad64e9a
exec_ecoff.h is not used here.
2000-04-29 21:45:27 +00:00
thorpej
1dcdb13c04
Implement __cpu_simple_{,un}lock{,try}(), modeled after the Alpha
...
implementation.
2000-04-29 19:39:51 +00:00
soren
082109d0e4
Move free page zeroing to before the whichqs spinner. Pointed out by simonb.
2000-04-29 14:44:42 +00:00
thorpej
dc8f3d3b3f
Oops, install <machine/lock.h> on these systems, too.
2000-04-29 03:45:42 +00:00
thorpej
f51470a514
Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
...
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
2000-04-29 03:31:45 +00:00
soren
9c2835a1c4
Make sure to read the clock before we leave the 'cold' state.
2000-04-28 19:58:04 +00:00
soren
2cfb26c801
Zero free pages in the idle loop.
2000-04-28 19:25:55 +00:00
uch
bd5f21ffeb
add PCIBIOS_ADDR_FIXUP, PCIBIOS_IRQS_HINT configuration. and its sample.
2000-04-28 17:23:51 +00:00
soren
78a464a74d
Add microtime().
2000-04-28 17:23:40 +00:00
uch
cc30f00dd3
PCI I/O address fixup routine.
...
When BIOS don't asign PCI I/O address space to device,
allocate it without conflict and write to PCI configuration header.
2000-04-28 17:19:10 +00:00
uch
e3c3882828
PCIBIOS_IRQS changed to PCIBIOS_IRQS_HINT. PCIBIOS_IRQS_HINT is
...
used when no IRQ guess. when at least 1 PCI device configured
correctly, unused.
2000-04-28 17:15:15 +00:00
soren
99e6adf31e
Adapt to cpu_intr() change.
2000-04-28 15:55:51 +00:00
ad
db06ac868b
Attach cac* and ca*.
2000-04-28 13:51:56 +00:00
ad
8f9b06a9e6
- Enable ca(4) device.
...
- Fix a couple of nits.
2000-04-28 13:50:25 +00:00
ad
ab2d7be096
Add missing cdevsw and chrtoblktbl entries.
2000-04-28 13:28:42 +00:00
shin
e3d2f0ae85
delete obsolete 'options MIPS_16K_PAGE'.
2000-04-28 07:19:33 +00:00
thorpej
0b3af10371
Keep track of current power state (resumed, standing by, suspended), and
...
only perform standby/suspend/resume actions if the state actually changes.
Inspired by some similar code in the USB code, pulled into here so that
the workaround isn't needed in every driver.
2000-04-28 04:48:51 +00:00
matt
70d4422b8a
Dump NRCV to 8 from 5. Note that a 8K NFS reply takes 6 full size
...
Ethernet packets so the chances are that if the server was fast enough
this driver would continuously lose one of the fragments. Eventually
causing the kernel load to fail. Add 2 extra for random ARP or other
packets that might be picked up.
2000-04-28 00:08:51 +00:00
is
e6f57d38e4
Fix thinko in fix for fix for cf_unit abuse.
2000-04-27 21:11:07 +00:00
uch
e14885d915
fix comment.
2000-04-27 19:38:23 +00:00
thorpej
a8b12af644
- When we get an ABOUT_TO_CHANGE event, send an OK message in response
...
so that the docking/undocking process can actually complete.
- Track the current docking state, and report the current state when it
changes.
- Make it possible to enable pnpbios verbosity at run-time.
2000-04-27 16:41:59 +00:00
soren
88bf41a16e
Use siop(4).
2000-04-27 10:52:43 +00:00
thorpej
43db473cbb
Clean up the docking-event related message, and make it possible to
...
debug docking events without having to debug the rest of PNPBIOS.
2000-04-26 20:33:46 +00:00
mhitch
7d9369f3d3
Fix callout change for keyboard repeat. The callout structure was
...
incorrectly added as a union member which overlaid the keyboard
state structure. Fixed by moving the callout structure into to
keyboard state structure.
2000-04-26 04:16:17 +00:00
tsubai
151b83e2e1
Add ex* at pci and rtk* at pci.
2000-04-25 16:05:06 +00:00
mrg
dab52c26ad
- add a note about streaming buffers and US IIi not having them.
...
- make some debugging messages in iommu_remove() saner and add some more.
- decrement 'len' in the no streaming buffer case, also.
- in iommu_dvmamem_map(), do not enter these mappings into the IOMMU,
only into the CPU (the former is done at _load time).
- make a panic that shouldn't happen a DIAGNOSTIC.
2000-04-25 14:59:38 +00:00
tsubai
1be338dabc
GC VM_MBUF_SIZE.
2000-04-25 12:31:10 +00:00
tsubai
63fca4fecb
Use P1SEG to map pool pages.
2000-04-25 12:17:06 +00:00
uch
f49b235cc0
remove COMPAT_386BSD_MBRPART
...
remove COMAPT_13, COMPAT_14. hpcmips appears NetBSD 1.5.
2000-04-25 06:20:14 +00:00
matt
1fe20bbb39
be a bit more defensive in the probe routines. only allow one attachment.
2000-04-24 21:59:22 +00:00
matt
d32950cb7e
Add cd9660 support to the secondary boot blocks.
2000-04-24 21:46:07 +00:00
thorpej
23694b5ab3
Glue in uvm_pageidlezero(). While here, improve some panic messages
...
in pmap.c, as requested by Jonathan Stone.
2000-04-24 17:18:16 +00:00
matt
b7de2c5900
Add lcgreg.h.
2000-04-24 17:09:56 +00:00
matt
7964d80339
Initial definition of registers for VS400 LCG cards. Still needs more.
2000-04-24 17:09:03 +00:00
ragge
c6a9a48f2e
Add 4000/90 to the countdown hack.
2000-04-24 14:45:30 +00:00
uch
6d1291a469
code clean up.
2000-04-24 13:02:13 +00:00
uch
814e39b9e3
add COMPAT_386BSD_MBRPART
2000-04-24 12:59:43 +00:00
uch
3be17707f3
remove #ifdef alpha
2000-04-24 12:58:32 +00:00
tsubai
88a555948c
Sync with current i386 pmap.c.
2000-04-24 08:40:21 +00:00
mhitch
62c210a97b
Fix bootblock countdown for 4000/VLC.
2000-04-24 07:03:27 +00:00
matt
9148a41e81
fix booted_qe case to compare locators against controllers.
2000-04-23 20:30:37 +00:00
tsarna
da1f2723c4
Addredd port-i386/9897, but differently. Since the effect of resetting
...
the video mode on machines with ancient or no video cards is not clear,
for safety's sake a I created a new biosboot variant, biosboot_resetvideo
that does the call.
Anyway, now I can boot my i-opener without hitting Tab. Thanks Andrew!
2000-04-23 19:57:12 +00:00
mhitch
437d090c28
Long term bug finally reared its head: size of device softc was specified
...
as sizeof(struct device) when amiga switched to new config, and recent
additions of callout structures and a long missing struct device to the
soft structure resulted in kernel panics when attempting to open the builtin
serial port. The callout structure initialization was clearing the serial
port softc data! Fixed by using sizeof(struct par_softc).
2000-04-23 19:55:51 +00:00
thorpej
bfced25d78
Update with reality.
2000-04-23 17:51:21 +00:00
thorpej
d0271b127d
Add PNPBIOS front-end for the PC Floppy Controller driver.
2000-04-23 17:50:00 +00:00
thorpej
0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
matt
c10673838a
Extend asc driver to include support for the VS400/9x.
...
Add VS4000/9x support vsbus_dma.c
2000-04-23 16:38:52 +00:00
takemura
6d972981ff
Support 8bpp mode on MC/R530.
2000-04-23 10:20:50 +00:00
minoura
dfb848e298
M680x0 are now defopt'ed.
2000-04-23 05:49:14 +00:00
minoura
13fc4ebbe1
Do not include opt_m680x0 in LKM.
2000-04-23 05:38:31 +00:00
eeh
5099c60132
If we trap due to a bad kernel stack, try to switch to the interrupt strack
...
before breaking into the debugger.
2000-04-22 22:06:06 +00:00
matt
25d6f027de
Detect controller number on boot_qe check.
2000-04-22 21:40:40 +00:00
groo
3a77b18fd7
name change; rl -> rtk. Still commented out.
2000-04-22 21:03:27 +00:00
ragge
8b94e15772
Fix boot block countdown on 4000/60. Easy to add for other 4000 machines also.
2000-04-22 20:29:58 +00:00
ragge
a47bd10baa
Use RAISEIPL on all workstations.
2000-04-22 18:11:27 +00:00
mrg
1013298c2a
whole bunch of changes:
...
- merge IOMMU DVMA code from sbus/psycho into iommu.c. this code was
identical and a few minor inconsistencies had crept in. this way
keeps them all in sync.
- with this code gone from psycho, merge the psycho.c and psycho_bus.c
files. same with ebus/ebus_bus.c. delete the _bus.c files.
- add a _ds_boundary member to the dma segment structure, so that later
dma mappings can find this value.
- set _ds_boundary in machdep.c:_bus_dmamem_alloc().
- kill much dead code.
2000-04-22 17:05:59 +00:00
ragge
3a90b3236e
Forgot a protection #define.
...
Make use of raise-spl.
2000-04-22 17:05:07 +00:00
ragge
8c7cf8f008
Add device switch entry for RL disks. Only uses rom to boot so far.
2000-04-22 16:52:23 +00:00
ragge
cab5a24c60
Recognize RL02 as boot device.
2000-04-22 16:50:44 +00:00
ragge
9b8f75bee1
Add "rl" disk.
2000-04-22 16:48:53 +00:00
ragge
cbf7514ca6
Detect "rl" as root device.
2000-04-22 16:43:47 +00:00
mrg
db956d0701
s#\b#\n# so an error message appears correctly.
2000-04-22 16:42:25 +00:00
thorpej
bedbdf87a4
rl -> rtk
2000-04-22 16:28:48 +00:00
uch
298fbbd162
fix VP3_CFG_INTR_MASK
2000-04-22 15:00:41 +00:00
tsutsui
5f992b6d2b
Rename rl -> rtk.
2000-04-22 13:13:21 +00:00
mrg
5aa4575432
- convert to DPRINTF() style debug messages.
...
- kill dead code.
- use the sbus dv_xname to construct a dvma map map, to pass to
extent_alloc(), to help support multiple sbusses
2000-04-22 12:36:29 +00:00
mrg
6e576e3c03
clean up mdallocsys().
2000-04-22 12:03:33 +00:00
ragge
dd22df3dc8
Ops, forgot to commit this.
2000-04-22 08:19:49 +00:00
groo
7c6a2dcd6d
name change; rl -> rtk
2000-04-22 06:56:20 +00:00
thorpej
cf0a940b9f
Add a pnpbios front-end to the pckbc driver. This is a littke wonky
...
yet.. the keyboard controller actually has 2 PNPBIOS nodes (one to
represent the controller I/O resources and the kbd port IRQ, and one
for the aux port IRQ). To cope with this, we're attaching two instances
of the driver and forge on ahead once both nodes have been seen.
If someone has a better way, please feel free to step forward.
2000-04-22 06:41:34 +00:00
thorpej
1842a5ee3a
Allow pnpbios_getirqnum() to return the share type, as well.
2000-04-22 06:38:24 +00:00
thorpej
8c5710a861
- Declare biosbasemem and biosextmem in <machine/cpu.h>, don't extern
...
them everywhere they're used.
- Avoid integer overflow when converting bios{base,ext}mem (in units of
kilobytes) to bytes.
2000-04-21 18:37:20 +00:00
explorer
79f12736c0
Add (commented out) addcom0 and com* at addcom?
2000-04-21 17:52:06 +00:00
bouyer
f1d93978ae
Rename define 'siop' to 'msiop' to avoid clash with machine-indepndant siop
...
driver. Doesn't change the name of drivers in config files.
2000-04-21 16:53:20 +00:00
bouyer
2ce6bd4b28
Rename the 'siop' define to 'asiop', to avoid clash with the MI siop driver.
...
This doesn't change the name of the drivers in config files.
2000-04-21 16:51:36 +00:00
matt
f52bc62c39
enable in-kernel NTP (so xntpd doesn't die).
2000-04-21 15:16:39 +00:00
shin
a332af2846
delete unused function mips3_TLBReadVPS().
...
reorder insns to avoid mtc0/mfc0 hazard (for VR4100/R4700/RM52xx).
save/restore PageMask in mips3_TLBRead().
2000-04-21 14:14:55 +00:00
shin
e2711a6552
make it compile with -DDEBUG.
2000-04-21 14:10:39 +00:00
tsubai
e27d574b01
Make this compile.
2000-04-21 13:35:27 +00:00
tsubai
14219ebd05
Use dev/ic/com.c.
2000-04-21 07:12:53 +00:00
nisimura
79733cb614
Effort to have consistent comments, fixing one error.
2000-04-21 02:45:01 +00:00
nisimura
3d5a5b03f5
- Address PR#9907. u_pte[1] wired down is left not global sometimes.
...
The brokenness is revealed sporadorically by memory usage on runtime.
- Avoid Vr4100 incompatibilty by making sure to retain default pgMask
value for TLB invalidation routines.
2000-04-21 02:39:55 +00:00
mhitch
ac3bfd5e7f
When the tty intialization was split out of rcons_init(), the call to
...
rcons_ttyinit() was never added to the pmax rasterconsole stuff. Output
to the display using /dev/console has not been working since then. Adding
the call to rcons_ttyinit() makes this work again.
2000-04-20 20:02:34 +00:00
ragge
73e5b4e878
Raise IPL after interrupt, for LANCE chip.
2000-04-20 18:55:50 +00:00
msaitoh
e61941261f
remove a debug log
2000-04-20 14:04:04 +00:00
msaitoh
25f1ebacc1
add a copyfault routine into the TLB miss handler
2000-04-20 14:02:41 +00:00
pk
43cdacc18b
ctx_alloc: set context before flushing a stolen context's cache
2000-04-20 13:59:02 +00:00
tsubai
8bd19349a1
Fill paa_busname field in pcmciabus_attach_args.
2000-04-20 11:51:27 +00:00
tsubai
baa659b825
#include <machine/conf.h>.
2000-04-19 15:56:27 +00:00
tsubai
c88cf26926
Sync with evbsh3.
2000-04-19 14:31:48 +00:00
haya
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
pk
e5ab0feccc
Have prom_cngetc() wait until input has been typed.
2000-04-19 08:15:06 +00:00
itojun
3be41bae18
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 06:50:27 +00:00
mrg
19a31e7b5e
add a newline to this fake autoconfig line.
2000-04-19 02:26:08 +00:00
matt
79a5b2164e
Remove autconf stuff. not needed and wrong.
2000-04-18 21:25:31 +00:00
minoura
dd8c46b8be
Explicitly include opt_m680x0.h.
2000-04-18 21:06:06 +00:00
minoura
64a8c7e0c8
defopt M680[2346]0.
2000-04-18 21:04:51 +00:00
matt
414d3f059d
Compile -Os instead of -O2 (optimize for space).
2000-04-18 20:47:04 +00:00
ragge
d334fb3019
Handle NCR5394 SCSI as NCR5380. (Doesn't matter, it will use the ROM
...
routines anyway).
2000-04-18 20:25:13 +00:00
ragge
86d5f2d67d
Add RPB number for VS4000 SCSI.
2000-04-18 20:23:54 +00:00
tsubai
be4988ee6d
Make kernel profiling work.
2000-04-18 17:06:01 +00:00
mhitch
a218b8543c
Enable cache on the 4000/VLC.
2000-04-18 16:28:04 +00:00
mhitch
a90cf56cda
PC_ICR doesn't exist on the 4000/VLC and trying to read it apparently
...
causes problems when the cache is enabled. Don't access it if boardtype
is VAX_BTYP_48.
2000-04-18 16:25:59 +00:00
mhitch
6c0d2ca981
Add some defines gleaned from OpenVMS to enable cache on the 4000/VLC.
2000-04-18 16:23:42 +00:00
tron
939041f1aa
Fix typo in last commit.
2000-04-18 14:48:53 +00:00
eeh
c58f0ee9cd
Prevent the system from getting watchdog reset by returning directly to user
...
mode if restoring the user window traps. Also reduce the time we run with
%tl>0.
2000-04-18 02:12:25 +00:00
eeh
2aec15d3d3
Turn off traptrace before printing a panic message so we don't flush the useful
...
traces out with the printf guts, and wrap some lines at 80 columns.
2000-04-18 02:07:57 +00:00
pk
4665cccb20
Comment-out the RASTERCONSOLE_{BG,FG} color settings; they represent
...
the default initialization.
2000-04-17 21:48:23 +00:00
pk
a558005cec
When constructing `ri_devcmap[]', pack four instances of the LUTs in each
...
32 bit wide entry (as not documented in the non-existent rasops(9)..)
2000-04-17 20:37:28 +00:00
ragge
a1413dca83
Fetch the SCSI ID out of NVRAM instead, if possible.
2000-04-17 20:36:23 +00:00
pk
d5a5871d3c
Make sure to reset the CPU context in ctx_free().
2000-04-17 20:32:00 +00:00
drochner
5e990a7f7c
implement bus_space_vaddr()
2000-04-17 17:39:17 +00:00
drochner
13c9f8d398
implement bus_space_vaddr()
2000-04-17 17:24:48 +00:00
ragge
d37dfad561
DEC have the internal SCSI controller as ID6, and CDROM as ID7.
2000-04-17 16:30:40 +00:00
tron
5bfc315184
Fix typo in comment.
2000-04-17 07:57:21 +00:00
pk
470504f184
Use screen attributes passed to our hardware rasops routines.
...
Move colormap initialization to cg6reset(), so this is also done
on last close of the framebuffer device (e.g. after X server shutdown).
2000-04-16 22:17:03 +00:00
pk
a644297344
Initialize the rasops device colormap to match colormaps used by
...
our supported devices (including even coloured text on the console).
2000-04-16 22:12:05 +00:00
pk
065ce82243
Switch initial colormap setup again to be compatible with the PROM's,
...
i.e. background at index 0: white, foreground at index 255: black.
Also, allocate a slice for an ANSI colormap, so we can experiment
with coloured text on the bare console.
2000-04-16 22:07:24 +00:00
pk
8505eb6375
Slight optimization when searching the video parameter table.
2000-04-16 21:01:43 +00:00
thorpej
2f7f997512
Oops, forgot RCS ID.
2000-04-16 19:46:54 +00:00
thorpej
506bf156e0
Kernel configuration file for my Abit BP6+dual Celeron machine. This
...
could be used as an example configuration file for that motherboard.
2000-04-16 19:46:21 +00:00
matt
ee754e5548
Autoconf for SCSI stuff on VS4000s.
2000-04-16 16:03:42 +00:00
matt
5fa416e77a
This should have never been checked in. it's what this directory is supposed
...
to make. opps.
2000-04-16 15:59:02 +00:00
kleink
903fce95c7
* GC two unused variables.
...
* Printf format nits.
2000-04-16 14:44:03 +00:00
minoura
4d4c982aa3
all -> realall.
2000-04-16 14:19:53 +00:00
minoura
311c19c0d5
Sync w/ GENERIC.
2000-04-16 14:17:59 +00:00
nisimura
a01973aecb
Change the way how pmap_protect() modifies the protection of KSEG2
...
space using MIPS_TBRPL() call. It avoils to 'vistimize' a possibly
useful TLB entry. XXX MachTLBUpdate() will be retired, soon.
2000-04-16 10:16:19 +00:00
nisimura
8feff14832
Fix a typo in the previous change.
2000-04-16 10:08:32 +00:00
ragge
637d2e3a82
Be a little bit more generous with TBIA.
2000-04-16 09:42:22 +00:00
ragge
7ad2b0ede3
Call doshutdownhooks().
2000-04-16 09:41:51 +00:00
nisimura
4edcc4fca2
Change the way to implement zero copy data move in pagemove() using
...
MIPS_TBRPL(). It saves about 20 instructions to run for each
iteration, and avoids TLB polution. Currently works for MIPS1 only
configuration.
2000-04-16 09:09:42 +00:00
nisimura
7717409808
Introduce MIPS_TBRPL() which replaces a TLB entry of given vaddr
...
with new entryHi and entryLo pair iff found in TLB. Works only
for KSEG2 this moment. mips3 version will follow.
2000-04-16 09:00:26 +00:00
tsutsui
95dd4d0f2c
Include "zstty.h" instead of "zsc.h".
2000-04-16 05:42:40 +00:00
takemura
95e706c931
Don't call IsDlgMessage() if we are on Windows CE 2.01.
2000-04-16 03:17:59 +00:00
matt
92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
matt
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
matt
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
soda
c56a43535d
remove following symbols which became unnecessary in recent cpu_intr() change:
...
mips_hardware_intr
MIPS3_INTERNAL_TIMER_INTERRUPT
mips3_intr_cycle_count
mips3_timer_delta
2000-04-15 22:05:51 +00:00
soda
94ee00e39d
define `ssir' here, rather than misp/mips/trap.c (like other mips ports)
2000-04-15 22:02:26 +00:00
soda
79bdf6e4a6
adapt interrupt() -> cpu_intr() change
2000-04-15 22:01:14 +00:00
soda
b3dcd5c3ee
add some TODOs.
...
overblocking and related problems are currently common to all mips ports.
2000-04-15 21:57:37 +00:00
scw
9b7b8d2fff
Bah, forgot to add intr.h during my last round of roto-tilling.
2000-04-15 21:20:35 +00:00
scw
8e95e817ec
Move <machine/cpu.h> above <m68k/*.h> so we get M680x0 #defines
...
for those m68k ports which define them in the former file.
2000-04-15 20:31:27 +00:00
is
136b230eaa
Don't use runtime systems' includes.
2000-04-15 20:10:41 +00:00
nisimura
e54e10f9ce
- Withdraw dealfpu() code which has been never useful so far.
...
- XXX It was a mistake to add CP1 insn encoding values into cpuregs.h.
Those will be relocated into mips_opcode.h with some adjustment work.
2000-04-15 06:21:01 +00:00
mrg
2aba26f773
- auxio cleanup and sbus support.
...
- make GENERIC64 include GENERIC and set the 3 optoins it needs. suggested
by hubert feyrer.
- add a comment that we maybe should use the `bpp' driver, not the lpt, on
the ebus because the `bpp' driver does DMA already.
- ebus_attach_args got a member renamed
2000-04-15 03:08:12 +00:00
mrg
e4ca29ac00
kill dead code
2000-04-15 03:07:38 +00:00
tsarna
24d492c6f3
Default the keymap to new "us.iopener" mapping
2000-04-14 23:14:25 +00:00
is
f0b2e9f184
Make this work again after the last changes...
...
remember, folks, potential Amiga console devices run autoconfiguration
_twice_.
2000-04-14 21:56:22 +00:00
is
97df1401a1
Move original Motorola files to the "dist" subdirectory, in response
...
to PR 9626 by Kris Shannon.
2000-04-14 20:24:29 +00:00
pk
20c3689343
Initialize local variable `bt' in cgthree_attach().
2000-04-14 19:36:43 +00:00
augustss
633209364f
Add FTDI FT8U100AX driver.
2000-04-14 14:53:32 +00:00
augustss
689485b4df
Add Rio 500 device.
2000-04-14 14:44:49 +00:00
takemura
1572bc4bfd
Make 'Boot' button to be default push button.
...
You can push return key to boot.
(But it does not work on Windows CE 1.0.)
2000-04-14 14:42:29 +00:00
pk
cd955cb171
dvma_init: avoid integer variable overflow
2000-04-14 14:14:47 +00:00
tsutsui
8d9c5e8206
- Fix comments. (NEWS have Zilog 8530, not Intel 82530)
...
- Fix cdev_tty_init() arg on newsmips (NZSC -> NZSTTY)
2000-04-14 13:41:24 +00:00
tsutsui
7865e586d3
Typo in comments. (Zilog 8350 -> 8530)
2000-04-14 13:29:57 +00:00
tsubai
dd83a9aa4f
Make this compile.
2000-04-14 10:22:06 +00:00
tsubai
0546f6b51a
Adapt cpu_intr change.
2000-04-14 10:11:06 +00:00
mrg
01ff053e58
add bpt and lpt. fixes final gcc warnings for GENERIC.
2000-04-14 08:36:39 +00:00
mrg
af6a8541e4
add some casts to (u_long) to shut up gcc. cleanup unused variables
2000-04-14 08:29:03 +00:00
mrg
726f5f3169
two more compiler warnings killed.
2000-04-14 04:08:26 +00:00
msaitoh
7e7033d239
Catch the breakpoint trap ("trapa #0xc3") and send SIGTRAP.
...
Now works breakpoint and continue!
TODO: single step
2000-04-13 23:00:42 +00:00
soren
0ce39b7430
Typo; user stack only needs to start one page below 0x80000000.
2000-04-13 22:02:54 +00:00
eeh
9b019404f8
Apparently gas 2.9.5 (don't ask) does not like to add values to %lo()
...
directives so move the additions inside %lo() to make it happy.
Hopefully this won't break older versions.
2000-04-13 18:40:27 +00:00
eeh
92aaaad1e1
Make /etc/mk.conf optional for kernel builds.
2000-04-13 16:57:51 +00:00
msaitoh
8796b43e1c
remove sys_vtrace()
2000-04-13 15:54:27 +00:00
msaitoh
c750d5f42d
- save/restore more registers in process_{read,write}_regs()
...
- return EINVAL in process_sstep (temporary)
2000-04-13 15:51:26 +00:00
msaitoh
9c13ab1d7c
KNF
2000-04-13 15:45:11 +00:00
msaitoh
ca4ca0111c
exports MACH and MACL registers, too.
2000-04-13 15:41:55 +00:00
msaitoh
9a41bed54e
move the Interrput Priority Level (IPL_*) definitions into MD part.
2000-04-13 15:36:09 +00:00
tsutsui
934ac598d8
Use "${OBJCOPY} -O binary" to strip a.out header.
2000-04-13 14:44:02 +00:00
mrg
fd85c1c4a2
avoid a potential memory leak.
2000-04-13 14:39:34 +00:00
tsutsui
297d0a58b7
Disable DPRINTF().
2000-04-13 14:19:57 +00:00
mrg
5792df1cf9
- do the "options<space><tab>" thing everywhere.
...
- disable COMPAT_AOUT.
- enable hme at sbus/pci
- enable bpp at sbus
- clean up esp attachments
- enable all xxphy's
- sync GENERIC & GENERIC64.
2000-04-13 11:23:14 +00:00
joda
1498ccad74
add com at cardbus
2000-04-13 11:21:18 +00:00
joda
39a71b22e4
add com at cardbus comment
2000-04-13 11:20:06 +00:00
mrg
fa13d97855
this does not need auxreg.h
2000-04-13 09:54:43 +00:00
mrg
b60fe7f45a
store all the physical address bits.
2000-04-13 09:53:49 +00:00
mrg
e7f3d69787
this does not need auxreg.h
2000-04-13 09:52:46 +00:00
mrg
542f08a422
add a version file.
2000-04-13 09:38:12 +00:00
mrg
f2ab01bf42
copy the "sparc" clean/cleandir target code, so that "cleandir" actually does a "clean"
2000-04-13 09:23:38 +00:00
christos
44c22dc618
make this compile with -DDEBUG_SVR4 [wrong variable name]
2000-04-12 15:13:15 +00:00
takemura
a3c99d2662
Dialog Box style key function. You can push space key to boot.
2000-04-12 15:07:34 +00:00
pk
a388797ed5
Ignore unknown devices on mainbus.
2000-04-12 11:40:12 +00:00
matthias
397c7cc20c
Merge all missing changes from sys/i386/i386/pmap.c;1.88.
2000-04-12 06:23:21 +00:00
nisimura
e7206926ef
Add a comment block describes what the intent of safepri global variable
...
as "During autoconfiguration or after a panic, a sleep will simply ..."
2000-04-12 04:40:50 +00:00
nisimura
cce3288e2f
Backout the previous change; safepri is an evil idea after all.
2000-04-12 04:30:35 +00:00