d64e10645f
Add "we" driver, remove "ed" driver.
1997-11-03 21:29:19 +00:00
ae4498b7bf
This driver is now obsolete.
1997-11-03 21:28:49 +00:00
60c2342028
Add a front-end to the MI dp8390 driver for the Western Digital/SMC 80x3
...
family, SMC Elite Ultra family, and SMC EtherEZ family of Ethernet cards.
This front-end completes the split of the ISA "ed" driver.
1997-11-03 21:22:50 +00:00
892b0c409e
Fix a slight brain lapse.
1997-11-02 05:17:32 +00:00
2497f4a8da
Garbage-collect the 3Com 3c503 support from the "ed" driver. The ISA "ec"
...
driver now handles the 3c503.
1997-11-02 00:57:24 +00:00
a945a24322
Front-end to the dp8390 chip driver for the 3Com 3c503 Ethernet interface.
...
Supports changing media with ifconfig's "media" directive.
This splits the 3c503 functionality out of the ISA "ed" driver, much the
same way NE2000 support was split out.
1997-11-02 00:44:25 +00:00
5322570d8a
- Move all of the configurable parameters (alloc_iobase, alloc_iosize,
...
intr_alloc_mask) into one place, comment them, and defopt them.
- Rename pcic_intr_alloc_mask to pcic_isa_intr_alloc_mask, since it's
an ISA-specific thing.
- When allocating/establishing the PCIC's interrupt (for card events),
do error checking, and pay attention to the intr_alloc_mask.
1997-10-29 22:48:43 +00:00
c733020f4b
Take IRQ 10 out of the default IRQ allocation mask. That IRQ is reserved
...
for the built-in SCSI on NEC Versa docking stations, and if a card
allocates that IRQ, it will never get interrupts. This caused the
default kernel to not work on these laptops, as IRQ 10 was often the
first free IRQ.
1997-10-29 21:33:16 +00:00
87ca153bb5
When creating ccbs, be a little more informative about why we couldn't
...
should creation/initialization of a ccb fail. Also, don't panic in
these situations. Instead, simply return an error condition and allow
the caller to deal with it. It may be the case that we were able to
create one ccb what we can grab, and continue to hobble along.
Also, fix the scb freelist fencepost, like the aha/bha/uha drivers.
1997-10-29 00:30:00 +00:00
917389821c
Changes to the probe and attach routine:
...
- at end of attach, explicitely select an existing drive. This fixes hangs
some users reported (such as the one reported in port-i386/4247).
- Some atapi cdrom drives (e.g. Nec 24x) don't enables their registers before
a controller reset is issued. The controller probe routine is changed as
follow: issue a controller reset. If fail, test atapi signature on slave.
If fail, wait 5s and retry a reset. If the second reset fail, return(0).
If the first reset succeed, test presence of a master drive:
atapi signature, and if this fail RO/RW registers test. If no master, test
atapi signature on slave. If no slave, return 0.
1997-10-27 14:09:23 +00:00
37919a04d9
Moved to src/sys/dev/ic/i82365.c via repository copy.
1997-10-20 20:24:17 +00:00
5c6445bc0d
Don't panic if we fail to remap i/o or mem space in the attach function.
...
Instead, print a diagnostic and return. (Some drivers do this already.)
Also, normalize the diagnostic message, and fix some places where the
printfs were getting ugly.
1997-10-20 18:43:03 +00:00
d82bb1870c
Make sure to unmap bus space when a successful probe is done, to prevent
...
a panic when the attach code does the map again. PR 4302, from
Anders Hjalmarsson.
1997-10-20 13:46:53 +00:00
29500b20c0
Make sure the i/o and/or mem addresses aren't wildcarded (i.e. -1) before
...
using the address in a bus_space_map() call.
1997-10-19 18:56:39 +00:00
fe0c14e139
Fix typo; hang binary operator at the end of previous line.
1997-10-19 14:10:11 +00:00
5c1050e68f
Include locators.h and use symbolic name comes from it.
1997-10-19 14:07:19 +00:00
17e98700bd
Use symbolic names for default locator values.
1997-10-19 09:05:04 +00:00
e7029fc0da
Make the audio API (almost) SunOS compatible.
...
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
83d255de83
This driver can't handle wildcarded iobase.
...
(This is really a config file error.)
1997-10-18 14:09:52 +00:00
801620373d
Define width_names[] only when PCICDEBUG is defined.
1997-10-17 09:37:12 +00:00
4eef29b72f
No need to cast a generic pointer.
1997-10-17 07:59:39 +00:00
b2004a534c
Make sure the 'input' class is used even for the 1345 mixer.
1997-10-16 23:34:57 +00:00
5345a8bef9
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:46 +00:00
befea59210
Pull marc-pcmcia branch down to trunk.
1997-10-16 23:21:41 +00:00
735b77fa73
Create new structure aic_isa_softc and hold interrupt handler in it.
1997-10-16 22:55:34 +00:00
9d865fc8f0
Fix a misspelling of slave in a comment.
1997-10-16 15:16:34 +00:00
a35a2a56e4
Garbage-collect "com" device declaration.
1997-10-16 00:47:23 +00:00
bc6479768b
Adjust for the new "com" driver home.
1997-10-16 00:29:28 +00:00
dfba65768d
Moved by repository copy magick to sys/dev/ic.
1997-10-16 00:18:54 +00:00
9ba1ceb091
Pulldown from marc-pcmcia branch.
1997-10-15 22:00:10 +00:00
2e1df18229
Cleanup ISA probe code. Don't collect info first. Just do the probe.
1997-10-15 21:26:51 +00:00
2939780605
Garbage-collect some old i386 console stuff that is no longer used, and
...
add a comment about something to be fixed later.
1997-10-15 21:13:36 +00:00
f9370ddc7a
Add and/or update rnd_*() hooks
1997-10-15 05:55:13 +00:00
62e78a5174
Correct a comment.
1997-10-14 23:06:30 +00:00
ec0566e1f8
Pulldown from marc-pcmcia branch: garbage-collect NE2000 support from
...
this file. The "ne" driver is now used, instead.
1997-10-14 23:04:19 +00:00
4dee791caf
Pulldown from marc-pcmcia branch: ISA front-end for "ne" driver.
1997-10-14 23:01:10 +00:00
10708da893
Pull down from marc-pcmcia branch:
...
Minor tweaks to deal with PCMCIA differences, and support for power
management.
1997-10-14 21:28:37 +00:00
59129515bb
Finalize the isa/lpt.c split:
...
The isa attachment code is in isa/lpt_isa.c now, which attaches to the
already created ic/lpt* files.
You don't need to change your config files, but you need to re-"config" if
using lpt at isa.
XXX The "lpt" device definition should be in sys/conf/files instead, but to
my knowledge, there are some ports which have private copies of lpt, and would
choke on that. No need to make people unhappy 7 days before release branching.
1997-10-14 15:50:15 +00:00
837124b35c
add bebox
1997-10-14 07:15:45 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
b551325998
AudioElinear -> AudioEslinear
1997-10-11 12:36:04 +00:00
2d019e5efd
AudioC[A-Z] -> AudioC[a-z]
1997-10-11 11:28:49 +00:00
b5feb41072
Add hooks to insert timing info into the random system
1997-10-10 01:09:03 +00:00
11a27a1132
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 07:57:17 +00:00
939e074dcc
Implement DIOCGDEFLABEL.
1997-10-08 23:05:22 +00:00
d5ecfe9e6b
Keep filter when setting source on SB Pro.
...
Close PR 2593.
1997-10-06 20:16:25 +00:00
64ff55911c
From Enami Tsugutomo: Busify and split the aic6360 driver.
1997-10-06 19:49:17 +00:00
176a81b2c5
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:37:01 +00:00
432b9f1831
Make this compile on alpha and, presumably, other non
...
_BROKEN_INDIRECT_CONFIG machines.
1997-10-03 07:32:50 +00:00
20cf0e1cc1
fix missing com_kgdb_attached() argdecl, from Michael C. Richardson in PR 4196
1997-10-03 06:11:35 +00:00
a2512e8ec5
Add TIOCM{BI{C,S},{S,G}ET} from revision 1.98. As Charles says these
...
interfaces are slightly broken and should be obsoleted, but some programs
are using them and also they are useful for debugging.
1997-09-30 21:51:43 +00:00
7b31453c6f
Rearrange the initialization a bit so we have SCBs available in
...
wds_inquire_setup_information(), rather than faking it.
1997-09-26 04:00:09 +00:00
1148723a5f
Set sc_dmat.
1997-09-26 02:50:18 +00:00
a2f2e87677
Return the rigth value in the interrupt handler. This change the semantic
...
of wdc_atapi_intr, so we check for ITSDONE rather than the return value for
a pooled command.
1997-09-24 17:00:55 +00:00
82625dc61e
Cosmetic Changes; make coding style closer to other part of this file.
...
(This version is identical with version 1.109 except whitespace changes.)
1997-09-19 01:17:37 +00:00
718fb97e11
Support for the upcoming NetBSD/Amiga Hypercom driver family:
...
* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
1997-09-16 20:34:23 +00:00
1cdcb2d362
Get rid of `register'.
1997-09-14 09:03:33 +00:00
8f33476972
Make console on multiport cards more likely to work (obvious bug,
...
fix still untested).
Closes PR kern/4095 by enami tsugutomo.
1997-09-12 13:31:10 +00:00
78b5eb1f52
Create DMA maps on ordinary GUS (non-MAX) cards. Now it should work again.
1997-09-12 10:27:10 +00:00
0310453204
The 501 uses 16 ports, and has a wider range of possible I/O address.
1997-09-10 05:40:23 +00:00
03ac1f4a46
Oops. Fix a teensy error in the previous.
1997-09-10 03:31:31 +00:00
7d0a127a3c
If we select a 32k window on the DEPCA, make sure to switch to the lower 32k
...
chunk.
1997-09-10 03:05:39 +00:00
fa0b187898
Make `hashkey' unsigned.
1997-09-09 18:56:15 +00:00
25baf39689
Change the way we determine what interrupt routine to use to make
...
it work when drq8 == drq16.
1997-09-09 00:57:10 +00:00
9c76fe8e78
Recognize any of the memory configurations allowed by the EE16 setup program,
...
and a few more that I can't test. Something is still wrong with the mapping of
16k boards, though.
1997-09-07 10:16:07 +00:00
4d51c802c6
Bus-ify GUS driver.
1997-09-06 14:31:34 +00:00
25b465a80c
Bus-ify the GUS driver.
1997-09-06 14:23:13 +00:00
7e062e8a4e
Enable use of bus_dmamem_mmap().
1997-09-05 01:48:33 +00:00
8a24374ad3
Convert this driver to use bus_dma.
1997-09-04 03:39:09 +00:00
702b60b0c1
Add a map to wdc_softc to track the already known devices to prevent them to
...
be probed several times. This fixes the "ATAPI CD probed as wd drive" problem.
Thanks to Geoff Wing <mason@primenet.com.au> for testing this on his hardware.
1997-09-03 07:57:51 +00:00
06ecebc8c0
add missing argument to LPRINTF() declaration; from Geoff Wing in PR 4072.
...
I also made inclusion of LPRINTF() dependent solely on the symbol
LPTDEBUG, initialized lptdebug variable to 0 instead of 1, and
matched arguments to format strings in LPRINTF() calls.
1997-09-02 01:37:19 +00:00
420b75952f
Insert a sanity check so we get a panic instead of a kernel page
...
fault if the DMA map is missing.
1997-08-30 17:33:49 +00:00
7886f60e81
Make SB full duplex. Ooops, I forgot this in the last commit.
1997-08-30 10:45:32 +00:00
e72ff15736
Substantial rewrite of the SB driver to make it do full duplex on an SB16.
...
Because of the braindead design of the SB the input and output have to
use different precisions (8 and 16 bits). It is possible to set the driver
to use 8 bits on both and it will the emulate 8 bits on the output by
expanding it to 16 bits.
1997-08-29 21:41:36 +00:00
9f3695bff9
Change an ATAPI_DEBUG2->ATAPI_DEBUG. This debug message is needed when
...
looking what's the autoconfig do on strange harware, and ATAPI_DEBUG2 is
for debuging data transfers (and is really verbose once the machine has booted
from an IDE disk).
1997-08-28 11:05:01 +00:00
5752a55af4
Zap drq2 if unused.
1997-08-28 00:02:12 +00:00
25c05417ed
Make this work with __GENERIC_SOFT_INTERRUPTS.
1997-08-27 18:00:13 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
a50d4ba893
XXX Add a drq2 locator for the ISA bus. Many sound cards need
...
two DMA channels to do e.g. full-duplex. This allows
a way of specifying the second channel in a sane way.
THIS IS TEMPORARY. The drq2 locator will go away when
the locator system has been changed to allow multiple
values per locator.
1997-08-26 19:26:38 +00:00
9de64894e9
Fix the "non-broken" indirect configuration so it might actually work.
1997-08-25 22:17:25 +00:00
cd7e93c44d
Add mute and channels swap to the mixer capabilites.
1997-08-24 23:50:40 +00:00
0bb9a48c65
Give names to some more mixer registers.
1997-08-24 23:24:51 +00:00
6616d47838
- Change audio_hw_if a little: set_param now sets the play and record modes
...
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
785dcbd7f5
Remove indirect brokenness.
1997-08-24 20:06:34 +00:00
48d839e594
Improve error message.
1997-08-24 20:03:51 +00:00
8188be767e
Check for KGDB port == console port in a consistent way.
1997-08-24 09:40:16 +00:00
f4e17ffbfe
Use the new com_is_console() to decide if the port is already initialized.
...
XXX shouldn't the attach() use the existing handle if present???
1997-08-23 14:06:17 +00:00
7ac5d81dbd
Use the new com_is_console() to decide if the port is already initialized.
1997-08-23 14:03:54 +00:00
d36e668737
clean up the serial console / KGDB attachment:
...
-put all early console / KGDB initialization into 1 exported function
(com_*_attach()) each, dont use global variables anymore
-use the passed tcflag_t for port settings instead of hardwiring 8N1
-at autoconfiguration attach time, decide if the attaching device is
already console / KGDB by comparing bus tag and base addr (cgd's wish)
-export a function "com_is_console()" for use by driver frontends for
this comparision
-delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right
-delete unused comcnprobe() and comcninit()
1997-08-23 14:01:32 +00:00
8fdd7cab62
Convert WSS driver to use non-broken indirect configuration.
1997-08-20 15:26:25 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
f78dfdfe6e
Avoid munging audio_defaults.
1997-08-19 23:35:44 +00:00
570688abef
Bring back the "comconsattached" flag. It is necessary for starred
...
com devices (on non "__BROKEN_INDIRECT_CONFIG" ISA).
1997-08-16 08:33:08 +00:00
b426bd9be3
-Export variables needed for system console initialization.
...
-Enable line break interrupt for DDB on a serial console.
-Share initialization code between DDB and KGDB.
1997-08-14 16:15:15 +00:00
0076beb284
fix multi-port serial drivers to reflect recent changes to com driver for console/kgdb
1997-08-13 21:26:52 +00:00
d5998780c0
KGDB improvements:
...
-Separate KGDB port initialization and softc related stuff to allow
KGDB to be attached in early system startup, before autoconfiguration.
-Export the variables needed by md code to hand-craft bus tag/handle.
-Fix initialization to enable interrupt by line break.
-Call DDB/KGDB at line break (move DDB call from the softirq handler
to the hard handler because it should work without a tty attached too).
1997-08-12 17:25:43 +00:00
b99285b1e4
Round mixer values correctly when setting them.
...
This is important for the OSS emulation since OSS
uses a different range of values for the mixer.
1997-08-11 01:08:13 +00:00
1e10e23444
Add back ia->iobase to initializer macros for softc device-register offsets.
1997-08-08 09:38:18 +00:00
e04b361dd6
Add A-law support and fix bug on opening GUS max.
...
From Feico Dillema <dillema@spam.aurum>.
1997-08-07 22:48:10 +00:00
a425e37505
Add a 'return 1' that got lost in the last commit.
1997-08-07 12:14:39 +00:00
ab87c23f0b
Use <bus.h>.
1997-08-05 01:13:50 +00:00
3bcc377a4c
Implement a function to test if a drq is taken and use it
...
in two drivers. There are still many drivers left to fix...
1997-08-04 22:13:32 +00:00
1fea370221
Get rid of `register'.
1997-08-04 19:05:27 +00:00
37d4460397
Get rid of `register'.
1997-08-04 18:47:16 +00:00
c392128002
Audio:
...
* Make it possible to use software assisted encodings that expand the
sample size.
* Use 16 bits per sample when emulating mulaw coding on the SB.
* Prepare for SB16 without CT1745 mixer.
1997-08-04 09:29:51 +00:00
affc3adbc9
Use gusmax_get_props instead of gus_get_props for gusmax.
1997-08-04 09:16:42 +00:00
658656bb99
Audio changes:
...
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
1997-07-31 22:33:08 +00:00
cf8a170732
Don't panic when creating a bus dma map for a taken dma channel,
...
it can happen during probing.
1997-07-31 22:20:47 +00:00
aef82b4aed
Add the ISA inteface for the lc (LEMAC, EtherWORKS III) driver.
1997-07-31 21:58:19 +00:00
a63034762b
Audio: Remove the machine dependant code I put in audio.c by mistake.
...
This adds another method to audio_hw_if. Also remove a field from
audio_hw_if that was not read-only.
1997-07-28 20:56:05 +00:00
f6cd87f322
audio: Minor cleanup and enable looping DMA for PSS and PAS.
1997-07-28 01:31:50 +00:00
d58bc6796f
audio: Simplify handling of AUDIO_SETFD and committing of encoding mode.
1997-07-27 23:51:48 +00:00
9745684ebe
Changes to the sudio system:
...
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
1997-07-27 01:16:32 +00:00
36ff661ec7
Make PAS audio work again.
...
From John F. Woods, PR #3859 .
1997-07-25 01:42:20 +00:00
013ac04cfb
config.new => config
1997-07-20 20:30:46 +00:00
3dd82f1394
Work around possible race condition with 2 drives on one controller
...
in wd_get_parms. PR 3773, from Onno van der Linden (onno@simplex.nl )
1997-07-18 00:26:22 +00:00
26414c7820
use locator defines in "locators.h" to index cf_loc[]
...
still to be done and/or decided not to be done: replace all *UNK uses in
isa code with the native names from locators.h
1997-07-17 00:58:48 +00:00
bacc863c24
Add atari.
1997-07-15 08:40:02 +00:00
8727da130b
In the name of backwards compatibility AUDIO_ENCODING_LINEAR has been
...
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
1997-07-15 07:46:04 +00:00
4193b52786
Do not compile in satlink unconditionally; from Thorsten Frueauf
...
<frueauf@ira.uka.de> in PR port-i386/3864.
1997-07-14 21:09:07 +00:00
d1f899bc4c
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:09:46 +00:00
8a210e82b2
fix mixer goof on GUS max
1997-07-09 03:03:21 +00:00
2252d1317b
Add support for remote serial KGDB.
1997-07-05 20:52:40 +00:00
efde490942
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:20:44 +00:00
d152627095
Make this work again; the code to avoid attaching a 3c509 in P&P mode
...
didn't map in the port properly, and it was only luck that it worked
on anything at all.
1997-06-23 05:25:40 +00:00
5d4e140e53
Remove spurious line left over in previous commit.
1997-06-18 22:17:14 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
09cad93ce8
Implement a better backpressure mechanism so that data is collected
...
in the driver's buffer if the tty buffer is full. If the driver's buffer
becomes full, turn off receive interrupts until it drains a bit.
1997-06-15 11:18:59 +00:00
47fab5e3ae
Make this compile again in light of recent changes to cdio.h
1997-06-14 08:55:14 +00:00
86ad297c12
Fix a braino in record source selection and a pasto in detecting
...
16 bit mode recording.
1997-06-13 19:21:59 +00:00
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
9d52c4bb31
4th arg to bus_space_{read,write}_multi_2() is a u_int16_t *, and should be
...
cast if it isn't. (These casts aren't necessarily safe, because of
alignment issues, but they allow the code to compile with prototyped versions
of bus_space_{read,write}_multi_2().)
1997-06-04 20:42:56 +00:00
5759a768d7
add software emulation stub for ulinear_be
1997-05-31 15:30:22 +00:00
9a7f1bfa84
Use single mode, not demand mode, for auto-initialize transfers.
1997-05-29 21:46:07 +00:00
8551fb607a
fix popping noises on 16-bit ulinear output.
...
add big-endian support
XXX ULINEAR_BE still needs ad1848 emulation on gusmax
1997-05-29 05:33:15 +00:00
1b429137ae
make Jazz16 16-bit output work properly again. Still hangs somewhere
...
(not yet diagnosed) on occasion in high-speed mode, but a ^C will exit
immediately--no 30-second drainage timeout.
1997-05-29 04:57:02 +00:00
e9028468cd
Don't use the TC bit to check for wraparound in isa_dmacount(); remember the
...
transfer length and use that.
1997-05-28 20:02:39 +00:00
1bd32f9cad
Add Alaw encoding emulation.
1997-05-28 00:07:46 +00:00
1616170859
A cosmetic name change.
1997-05-27 23:37:53 +00:00
6756ff7858
Minor corrections to previous. Notably, make recording work on SBPro again.
1997-05-26 16:13:59 +00:00
6bfd7b7d45
Remove unneeded call to comstop() in commsrint(). This fixes a problem
...
where the driver would sometimes retransmit bytes.
1997-05-26 14:54:46 +00:00
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
29e9c34ad3
Add RCS id.
1997-04-06 00:35:19 +00:00
0a999294f5
Add support for MAD16 based audio cards.
...
XXX Change the way we determine to probe for it when
multiple I/O ranges are available.
1997-04-06 00:33:07 +00:00
7dedd37033
Busify the WSS driver.
1997-04-05 23:50:23 +00:00
9448a01404
New version of com driver. Uses a different queueing mechanism and a split
...
hardware/software interrupt mechanism for improved performance. Many odd
protocols bugs also fixed.
1997-04-04 20:56:34 +00:00
232ade1b2b
comdefaultrate -> comconsrate
...
comconsbah -> comconsioh
Only use comconsrate on the console.
1997-04-04 20:49:49 +00:00
ef8d40a999
Busify the driver (from perry).
1997-04-04 18:59:35 +00:00
4df7e1dac7
Remove superfluous probe message.
1997-04-02 03:58:25 +00:00
c1f72bba37
Add ifmedia hooks: include <ifmedia.h> and add sc_media to softc.
1997-03-30 22:47:05 +00:00
dd46e6280e
partial fix for PR 3385: correctly identify JAZZ-16 when AUDIO_DEBUG is
...
enabled
1997-03-29 05:41:28 +00:00
11117540d2
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-29 02:32:30 +00:00
056fd71e85
General cleanup: bus.h, etc.
1997-03-29 02:11:09 +00:00
080350dc0d
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-28 23:47:08 +00:00
eba3c11c27
some cleanup; still needs a *lot* of work
1997-03-25 07:57:14 +00:00
983d7a8c15
use new name sc_drq8 and initialize sc_drq16 (reflect changes to SB driver)
1997-03-24 05:30:28 +00:00
188dec4d19
Clean up a bit, and export isa_dmamask() and isa_dmaunmask() interfaces.
1997-03-21 02:17:11 +00:00
3523bc35d5
Add an isa_dmacount() function, to get the current residual count on a channel.
1997-03-21 00:00:21 +00:00
6f51eb5c3d
Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe.
1997-03-20 21:42:11 +00:00
b89990fba6
Oops; fix pasto.
1997-03-20 20:18:40 +00:00
4f9648674a
Make sure we round the block size to a multiple of the sample size.
1997-03-20 20:15:24 +00:00
e0b3534b6c
Remove bogus block rounding code. If the application sets a
...
block size explicitly, it had better know what it's doing. From
PR 2587, by Robert Baron.
1997-03-20 16:04:22 +00:00
a2f33a43c2
Turn off a debugging printf().
1997-03-20 11:04:51 +00:00
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00
eb7e30aa3d
normalize off-by-four ad1848 register offsets.
...
also silence probe unless debugging is enabled.
1997-03-19 06:47:37 +00:00
80a8a81608
normalize off-by-four ad1848 register offsets.
1997-03-19 06:45:21 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
d9b86972c1
SB minor version number is always two digits
1997-03-12 07:06:19 +00:00
1186720517
eliminate leftover header from bt -> bha conversion; noted by Enami
...
Tsusgutomo in PR kern/3310.
1997-03-11 04:24:03 +00:00
700cbbae46
Fix bug introduced in the conversion to bus_*(). Don't always say that
...
we are a JASS16. From enami tsugutomo.
1997-03-03 21:40:01 +00:00
c7cec27edf
Move if_ep media-sense code from front ends to inside back end,
...
to prepare for if_media, and to support EISA 3c59x cards:
* change epconfig() to take a short that encodes the chipset
type (3c509, or Demon/Vortex/Boomerang).
* add distinct 3c509 and Demon/Vortex/Boomerang media-sense
functions to back end.
* Add EISA match/attach support for the 3c592 and 3c597
(Demon) cards as well as the 3c509-comatibl EISA 3c509/3c579.
* Assume that ISA and ISA PnP cards are 3c509-style, until
proof to the contrary (e.g. large packet support).
Tested on 3c595, 3c590, and 3c509b. Not tested on 3c515 or Demon.
1997-02-18 10:51:06 +00:00
2953a0ce90
Pass the i/o handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>,
in PR #3216 .
1997-02-12 23:37:38 +00:00
dfa1224fab
Oops, pass the memory handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>, in
PR #3216 .
1997-02-12 23:36:04 +00:00
1dd1504980
Move the aha ISA probe functions into a separate file.
1997-02-07 17:37:27 +00:00
f89ffa1fe4
don't clobber IER in cominit(). (suggested by mycroft.)
1997-01-30 19:42:33 +00:00
3573080902
split isasearch (!__BROKEN_INDIRECT_CONFIG) completely off of
...
isascan (__BROKEN_INDIRECT_CONFIG), and attempt multiple match/attach
of cloning devices in isasearch(). (If a match/attach succeeds for
a cloning device, try it again.)
1997-01-26 03:49:28 +00:00
8852c180ef
Fixes to wd driver from cgd -- corrects several nasty bugs typically
...
associated with coming out of suspends/sleeps on laptops.
Approved by fvdl.
1997-01-17 20:45:29 +00:00
e6717c0bc9
- convert to bus_space_*
...
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
fe9f1f4e3e
add missing copyright and RCS ID; ok'd by mycroft
1997-01-15 07:06:42 +00:00
be33336052
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
58e4442168
Turn off the baud rate changing optimization.
1996-12-14 08:56:23 +00:00
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
74187419b6
The last change fixed a last-minute goof in the __BROKEN_INDIRECT_CONFIG
...
case, but added a typo (extra parenthesis) in the !__BROKEN_INDIRECT_CONFIG
case. fix it.
1996-12-08 00:14:03 +00:00
243ef518d2
fix a (fatal) bug in the __BROKEN_INDIRECT_CONFIG changes checked
...
in yesterday. (got a little bit careless with #ifdef'd variables.)
1996-12-05 22:16:04 +00:00
179a058e17
fix AUTO_CAL_ENABLE bug, & misc. cleanup.
1996-12-05 07:01:30 +00:00
94909aee07
return proper output port. Fixes PR kern/2014.
1996-12-05 06:48:47 +00:00
3ec2c5af68
Duh, make sure i/o tags and handles are initialized before actually
...
probing for the LANCE chip.
1996-12-05 02:39:37 +00:00
197d80c63a
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
...
is defined.
1996-12-05 01:25:23 +00:00
c164cadf68
Convert to use <machine/bus.h>
1996-12-02 05:44:17 +00:00
3b4e2a1ac9
In wdattach(), when printing out info about the drive, make the output
...
look a little more like a SCSI disk's. This has the pleasant side-effect
of preventing the output from annoyingly extending past 80 columns.
1996-11-27 10:50:39 +00:00
d7c58f547e
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
...
(e.g. from 0x3bc to 0x3bf, for example). Others may require more,
but until there's some special handling for them, 4 should be returned
so that on systems with I/O port accounting, the unit at 0x3bf can be
properly mapped, etc. (OK'd by mycroft.)
1996-11-23 23:22:50 +00:00
452ba6e098
restrict the FSTATE_STAR prohibition (and panic) to the i386 only. Cloning
...
devices actually do make sense on indirect-config busses, because you
might be able to have more than one of the busses! In addition, they're
useful because they don't require unit numbers to be wired down, so you
could e.g. have vga* at indirect? and vga* at direct?, and have the first
one found be unit number zero. Finally, devices which can divine their
own ports numbers, etc., actually should be cloning, even if you know you'll
only have one bus that they can live on.
1996-11-23 21:36:44 +00:00
bcc644fd7e
Add missing arguments to NIC_GET in debug code. Fixes kern/2875.
1996-11-17 04:11:18 +00:00
40bd2b1104
Fix front-ends of split uha driver to compile when DDB is not configured:
...
Propagate Debugger() macro from uha.c to uha_{eisa,isa}.c.
update file names accordingly.
1996-11-15 22:53:36 +00:00
b005a8ee10
move cominit() prototype to comvar.h, so that ports which use 'com'
...
for serial console, but don't use the (i386-specific)
comcninit()/comcnprobe() functions, can do the right thing.
1996-11-13 19:41:35 +00:00
457c188626
Use device struct from sbdsp_softc, eliminate redundant softc members.
...
Fixes PR kern/2237.
1996-11-12 07:39:56 +00:00
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
233251d896
add missing argument to bus_space_map in ESP code
1996-10-22 00:45:25 +00:00
769a499800
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:34:38 +00:00
0211a3232d
Appease the compiler: get rid of some unused variables, add some
...
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
35b8c6aa4c
Add some prototypes, clean up some unused variables, and misc. other
...
compiler warning cleanup.
1996-10-17 04:21:55 +00:00
bfe653fbd7
fix PR 2851: make it compile under -Wformat
1996-10-16 11:32:45 +00:00
aa8449a9ef
fix compile errors & warnings
1996-10-16 01:12:18 +00:00
86373f8cf9
backout kprintf changes
1996-10-13 01:37:04 +00:00
58953408cb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:04:48 +00:00
e51a0f737a
- printf -> kprintf, sprintf -> ksprintf
...
- fix unused variable warning
- include <systm.h>
1996-10-10 21:27:25 +00:00
ce31bd3eb6
- printf -> kprintf, sprintf -> ksprintf
...
- Remove unused variable
- include <systm.h>
1996-10-10 21:26:04 +00:00
18f1d603f0
- printf to kprintf, sprintf -> ksprintf
1996-10-10 21:25:07 +00:00
764db9b35b
- printf -> kprintf, sprintf -> ksprintf
...
- provide a default case to handle an unknown model number.
- include <systm.h>
- remove unused variable.
1996-10-10 21:23:28 +00:00
245e10b406
- printf -> kprintf, sprintf -> ksprintf
...
- ifdef an unused variable.
1996-10-10 21:21:52 +00:00
thorpej