Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
82,698 Commits 606 Branches 0 Tags 3.1 GiB
9dc361ff1e
Commit Graph

10645 Commits

Author SHA1 Message Date
onoe
61285ac2da Add Cisco/Aironet 350 2001-06-18 13:18:08 +00:00
jdolecek
e65b619faa Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS. 2001-06-18 11:06:26 +00:00
bouyer
49ed2592ce Add my copyrigth and remove the older ones. None of the original authors of 
the st driver wrote something in this file.
 2001-06-18 09:41:06 +00:00
bouyer
0a63f01fef Snapshot of ATAPI tapes support. Known to be able to read/write to tape with: 
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
 2001-06-18 09:05:05 +00:00
simonb
1506d21315 Make error checking/reporting a little more correct. 2001-06-18 01:58:08 +00:00
tsubai
de98ab5b38 Regen. 2001-06-17 19:51:27 +00:00
tsubai
b63b6d01e6 Add device IDs on the new iBook. 2001-06-17 19:50:33 +00:00
jdolecek
adaaf11f9f make pckbc_slot_names[], pckbc_portcmd const 2001-06-17 16:15:41 +00:00
thorpej
4c49d6fa2a Split the Tx and Rx interrupt routines into separate functions, 
and add some (optional) event counters.
 2001-06-15 22:16:00 +00:00
nathanw
f71391cb6c Move the check for successful attachment to earlier in the detach 
routine, to avoid referencing nonexistent data structures.
 2001-06-15 18:05:36 +00:00
bjh21
ddc6e8e6ad I've got an 8-bit Ether3, so I've discovered that the address mapping is 
non-linear.  Comment it here so I don't forget.
 2001-06-15 00:28:01 +00:00
mjacob
60a0137d9c Ooops- we need to allocate an array of pointers to scsipi_xfer structures 
isp_maxcmds in length- not an array of scsipi_xfer structures isp_maxcmds
in length.
 2001-06-14 19:54:07 +00:00
itojun
4d51fe368b change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange. 
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).

was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
 2001-06-14 05:44:23 +00:00
oster
669f5cc5a5 It's silly to need a parity rebuild after a reconstruction has completed. 
If we've just reconstructed a disk, then the parity is known to
be correct.  (XXX doesn't hold for RAID 6!)
 2001-06-14 02:35:56 +00:00
thorpej
3078a3d26d It's pretty questionable to printf a PCI tag, but if we're going to 
do so, at least make the printf compile across the board.
 2001-06-14 01:06:56 +00:00
uch
a9d7b546d6 make this work. 2001-06-13 19:02:13 +00:00
bjh21
bb5ca33de4 Add a driver for the HCCS IDE interface I got at Wakefield. Like the D.T. 
Software one (dtide), it doesn't generate interrupts, so we run it in polled
mode.
 2001-06-13 18:31:43 +00:00
bjh21
18c4c9eab3 Update to use the new support for IRQ-less IDE controllers. 
Also generally re-work to do channel attachment in a loop, since that saves on
code size.
 2001-06-13 18:29:40 +00:00
bjh21
6acf237023 Use the new generic mechanism for forcing polling on a SCSI interface, rather 
than doing it ourselves.
 2001-06-13 18:27:27 +00:00
bjh21
4bc5a3b295 Add explicit support for IDE and SCSI adaptors which don't support interrupts. 
On such adaptors, all transfers are done in polling mode.

OK'ed by Manuel on tech-kern.
 2001-06-13 18:17:38 +00:00
toddpw
a865af9ad5 Enable attachment for Kingston KNE-PC2 Ethernet. 2001-06-13 13:41:01 +00:00
wiz
c03a48d64f withough -> without 2001-06-13 10:45:57 +00:00
scw
e13606c37b Workaround for buggy OPTi pciide chipset revisions, as reported 
in PR/11644.
 2001-06-13 09:55:25 +00:00
lukem
d9db68b3fe be more specific about which interlan controller the qbus/if_il supports 2001-06-13 06:40:19 +00:00
simonb
6c4e6292a5 Regen; add IBM 405GP PCI Bridge & ROB-in i960RP Microprocessor. 2001-06-13 06:04:25 +00:00
simonb
18b2f7e6a1 Add a port to IBM's PPC405GP Reference Board (the "walnut") 
by Eduardo Horvath and Simon Burge of Wasabi Systems.

IBM 4xx series CPU features:
 - New pmap and revised trap handler.
 - Support on-chip timers, PCI controller, UARTs
 - Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
 - Add in-kernel PPC floating point emulation
 - New in{,4}_cksum that is between 1.5 and 5 times faster than the
   old version depending on CPU type.
General changes:
 - Kernel support for generic dbsym-style symbols.
 2001-06-13 06:01:44 +00:00
thorpej
015345c74b Don't need INET or NS includes here. 2001-06-12 22:32:51 +00:00
thorpej
9988acd41e Don't need INET or NS includes here. 2001-06-12 22:28:15 +00:00
thorpej
e103dbb4b0 Don't need NS-related headers here. 2001-06-12 22:05:53 +00:00
bjh21
18e8d752f6 No need to pull in INET or NS headers -- that's all done by ether_ioctl() now. 2001-06-12 20:53:39 +00:00
wiz
0a600be867 receive, not recieve 2001-06-12 15:17:10 +00:00
wiz
2a8c778f1b retrieve, not retreive 2001-06-12 14:59:27 +00:00
bjh21
cb6b68a931 Mention where I got the information for writing the driver. 2001-06-12 11:52:03 +00:00
bjh21
f6f3c9b35f Add a hefty comment about the stray IR bug, so I don't forget it. 2001-06-12 11:49:18 +00:00
wiz
b50f28c38a underrun, not underun 2001-06-12 11:48:51 +00:00
uwe
1f4eee4c21 In wsfont_map_unichar: when checking that 'lo' is within 'map2' range, 
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
 2001-06-12 00:57:10 +00:00
bjh21
33afab3251 Add a short-circuit return from wdcprobe for IDE controllers without pullup 
resistors, which return the last value written to the bus on a read.  This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
 2001-06-11 21:18:36 +00:00
thorpej
fb2f3ce7e5 Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet 
product ID.
 2001-06-11 21:13:49 +00:00
thorpej
ec5280c1ed Add Level One product ID, and LXT-1001 10/100/1000 Ethernet 
product ID.
 2001-06-11 21:12:29 +00:00
fredette
274629aa08 Added support for the VME `sc' SCSI board. Compiles, 
but needs testers as the author doesn't actually have
the hardware.
 2001-06-11 15:09:54 +00:00
pk
b9e61207ff Add nolun/nosync quirk for "IBM CDRM00201 !F" 
See PR#13031.
 2001-06-11 13:58:18 +00:00
sato
a2c4938b03 not set HPCFB_SWAP_BYTE 2001-06-11 09:36:44 +00:00
tron
a4401a8e5d Regen from "pcidevs". 2001-06-11 06:36:51 +00:00
tron
6caf1041cb Add support for the D-Link DFE-530TX+. Patch supplied by 
Gabriel Rosenkoetter in PR kern/13161.
 2001-06-11 06:36:23 +00:00
wiz
40ac848024 Fix various misspellings of compatible/compatibility. 2001-06-11 01:50:48 +00:00
wiz
0a3b1c29a1 transceiver, not transciever. 2001-06-11 01:19:53 +00:00
gmcgarry
6fee8596c7 Packet includes CRC, so mark it in the mbuf header. Fixes the 
"discarding oversize frame (len=1518)" problem.
 2001-06-10 21:53:08 +00:00
ragge
01c6253206 Only use b_proc if B_PHYS is set. 2001-06-10 18:41:27 +00:00
tron
d29b7bb88c Regen from "usbdevs". 2001-06-10 13:10:46 +00:00
tron
8a6a34f18e Add Philips PCA646VC PC Camera. 2001-06-10 13:10:25 +00:00
tsubai
5a051092e4 Rename ofb_softc to ofbus_softc. (XXX Is this good name?) 2001-06-10 11:36:03 +00:00
ad
bfac43a1c8 Centralise the geometry fudge. 2001-06-10 10:48:42 +00:00
ad
5f1286dfb9 Don't make assumptions about the contents of the system drive table. 2001-06-10 10:34:44 +00:00
scw
737763fde7 Forgot to commit this as part of the mvme68k evcnt(9) changes. 2001-06-10 08:27:42 +00:00
briggs
acf06d2e27 If the adapter is returning a selection timeout, then we should be 
returning XS_SELTIMEOUT, not XS_TIMEOUT.  Pointed out by Andrew Doran.
 2001-06-09 18:08:20 +00:00
briggs
8c948a0386 Patches from takashi.yamamoto@bigfoot.com in kern/13139. 
- Set XS_TIMEOUT on a selection timeout condition.
- Do not bother to call AscStartChip() in AscResetChipAndScsiBus()--
  just clear the chip status.
- Make sure address is word-aligned in AscWriteLramByte().

Tested on my adv (AdvanSys ABP-9xxUA) with CRW8424S and UMAX SuperVista S-12.
Earlier versions of the system would get stuck trying to recover from error
conditions when the CD-RW drive was in heavy use.  I have not seen that
behavior with these small patches.
 2001-06-09 17:18:21 +00:00
bjh21
810a0b00f4 dtide is MI now. 2001-06-09 13:51:49 +00:00
tsutsui
14f1650c62 Remove unused members from SCSI command block structure. 2001-06-09 13:43:02 +00:00
tsutsui
9cd36c6539 Fix an uninitialized variable in #ifdef DIAGNOSTIC. 
Pointed out by soda.
 2001-06-09 12:59:50 +00:00
bjh21
e609865bbc Correct reference to dtide.c, and don't bother with the "channel" locator to 
dtide, since ata provides that anyway.
 2001-06-08 22:33:59 +00:00
bjh21
ca2047f7c6 Adapt the dtide driver to the MI podulebus framework, and move it to its new 
home.  It still doesn't actually work, but that's a SMOP.
 2001-06-08 20:13:24 +00:00
bjh21
837afd713e Regen 2001-06-08 20:09:07 +00:00
bjh21
e918a481e5 Move D.T. Software to their rightful place in the list, and correct the product 
ID for their IDE interface.  I've no idea where 0x00ae came from.
 2001-06-08 20:08:35 +00:00
mrg
054673b07c #endif /* takes no argument */ 2001-06-08 12:51:17 +00:00
enami
578730c551 Initialize sc->sc_anegticks to 5 on attach to prevent panic due to 
assertion failure.
 2001-06-08 07:09:40 +00:00
simonb
e5bd00e48d For ports that wire up pciide in compatibility mode, have 
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.

Ports that don't need to do this no longer need to supply a
dummy function.
 2001-06-08 04:48:54 +00:00
matt
ef047f21f8 Add multiple inclusion protection. Define prototypes for openfirm 
routines used in cdevsw.
 2001-06-08 00:19:17 +00:00
mrg
59024512bd LKM friendly: move ev_out32() to netbsd32 specific code; add an ev_out32 hook. 2001-06-07 17:52:52 +00:00
briggs
7a3a78cfa3 Compile on sandpoint. 2001-06-07 16:48:09 +00:00
bouyer
df4739c8cb Set TI_OPMODE_1_DMA_ACTIVE only if hardware assisted checksum isn't used 
(FreeBSD does it this way). My Tigon II works with hardware assisted checksum
now.
 2001-06-07 14:35:58 +00:00
enami
85fb541842 Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when 
reporting interrupt errors.
 2001-06-07 10:55:15 +00:00
leo
72510eee6d Make the WDC_{ATA|ATAPI}_NOSTREAM flags settable through configuration 
options. Needed on the Atari Milan.
 2001-06-07 06:33:48 +00:00
thorpej
ff5871412e Correct the receive mode mask in the RXCMD register. 2001-06-07 05:19:26 +00:00
thorpej
025decbccb Don't clear a callout on a scsipi_xfer that has been scsipi_done()'d. 2001-06-07 03:44:00 +00:00
soren
26603afde8 Update URL to documentation PDF. 2001-06-06 22:11:42 +00:00
uch
03e1c3aa16 implement HPCFB_SWAP_BYTE. 2001-06-05 17:29:12 +00:00
uch
b596bfa2d0 add vc_reverse flag to struct video_chip. 2001-06-05 15:02:40 +00:00
uch
a4221d6b08 change behavior of cmap_work_alloc(). 2001-06-05 15:02:12 +00:00
tsutsui
15f8692183 Make some functions __inline. 2001-06-05 12:42:44 +00:00
thorpej
8ee014b439 Handle the DL10022 case. 2001-06-05 02:31:16 +00:00
thorpej
c619444a71 Use the DL10019 media routines on the DL10019 and DL10022 (a change 
I forgot to commit long ago).
 2001-06-05 02:27:02 +00:00
ragge
cae5d5a796 Lock the kernel lock at interrupt enter. 2001-06-04 21:31:28 +00:00
mrg
46762d3560 fix lint exposed by GCC 3.0 20010604 (prerelease). 2001-06-04 20:56:51 +00:00
uch
859a6a49b2 ANSI KNF. 2001-06-04 18:59:31 +00:00
jdolecek
07677cc805 Use back the 'u'&037 form - since it's CTRL-u, it's more readable that way 
Use \007 instead of symbolic constant, since that's what is more often used.
Pointed out by Robert Elz.
 2001-06-04 09:45:03 +00:00
augustss
147c9186b5 Remove overly paranoid test (and not in the spec either). From OpenBSD. 2001-06-04 06:01:40 +00:00
augustss
d7079b251e Regen. 2001-06-04 06:00:43 +00:00
augustss
db2a5598b4 Add the Logitech iFeel mouse. 
(Now that's a weird device, perhaps I'll write a driver for the vibration
feedback.)
 2001-06-04 06:00:20 +00:00
toshii
13aba87bcb Don't pass nonpositive repeat count to CSR_*_MULTI_2. 
Should fix kern/13092.
 2001-06-04 03:34:47 +00:00
jhawk
4cfd2cf1d0 s/printf/DPRINTF/ for kern/13101. 2001-06-03 23:52:51 +00:00
jdolecek
dccf11ae11 cngetsn(): cosmetic only - use '\025' instead 'u'&037, and '\b' instead '\007' 2001-06-03 17:56:10 +00:00
ragge
056e20f2cc Need to get the kernel lock when entering by interrupts. 2001-06-03 15:15:02 +00:00
lukem
461a7daf74 fix comment 2001-06-03 14:29:42 +00:00
tsutsui
bcdd082840 Add a driver for the Initio INIC-940/950 PCI SCSI controllers. 
Based on OpenBSD's iha driver, and modified some structures by me.

Tested on arc, i386 and macppc.
 2001-06-03 13:43:45 +00:00
thorpej
4e7cb03446 Differentiate between a DL10019 and a DL10022 (they have slight 
MII differences).
 2001-06-03 04:52:28 +00:00
thorpej
37368cb858 Use the correct bitbang ops on the DL10022 (oops!). 2001-06-03 04:39:52 +00:00
thorpej
cc3002d53b Clarify a historical comment. 2001-06-03 03:55:10 +00:00
thorpej
f75e45c854 In ti_init2(), use a simpler, more obvious, and correct MTU 
calculation to give the firmware.
 2001-06-03 03:46:43 +00:00
thorpej
f2b9a1f3cc Replace a bunch of home-grown Ethernet related constants with 
ones defined in <net/if_ether.h>
 2001-06-03 03:29:44 +00:00
thorpej
9987ee5249 Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet 
PHYs.  This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
 2001-06-02 21:42:10 +00:00
thorpej
424f7a1e65 Make PHY matching all table-driven. 2001-06-02 21:39:38 +00:00
bjh21
947699688a Create hcscreg.h, and put a couple of magic numbers in there. 2001-06-02 20:13:50 +00:00
thorpej
ca4d373730 Implement support for IP/TCP/UDP checksum offloading provided by 
network interfaces.  This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us.  In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software.  This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.

We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.

Note: hardware-assisted checksumming defaults to "off".  It is
enabled with ifconfig(8).  See the manual page for details.

Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
 2001-06-02 16:17:06 +00:00
toshii
9590a56496 Use bus_space_{read,write}_multi_stream_2 where available. 2001-06-02 15:49:16 +00:00
bjh21
fd7e9d6d32 Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are 
unique anyway.  Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
 2001-06-02 12:07:34 +00:00
bjh21
e9ff9b9d73 Enable disconnect/reselect (now that it works) and parity checking. 2001-06-02 11:43:40 +00:00
thorpej
2da55b9a39 Define some extra configuration block bits used on the i82550 (a.k.a. 
PRO 100/S), including the extended RFA format.  Don't hard-code the
RFA size to allow us to use the extended format in the future.
 2001-06-02 01:04:01 +00:00
jdolecek
f6af05f407 Back the last revision off, upon Bill Sommerfeld's request 2001-06-02 00:46:00 +00:00
jdolecek
5dbe622e77 When polling, raise priority level to tty, to block keyboard interrupts 
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.

Discussed on tech-kern@.
 2001-06-02 00:01:04 +00:00
thorpej
33a6994da1 Driver for Broadcom BCM5400-family Gig-E PHYs. Programming 
information gleaned from FreeBSD.
 2001-06-01 16:49:59 +00:00
haya
1331bcc296 cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h. 2001-06-01 10:30:37 +00:00
bouyer
88f3192778 Fix typo in sddump() which caused core dumps to fail with ENXIO. 2001-06-01 08:39:54 +00:00
simonb
b3e7ecfd97 Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>. 
These aren't needed.  Tested on i386 and alpha.
 2001-06-01 00:38:31 +00:00
tron
264d7e1264 Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the 
CD player include in version 2.x of the "kdemultimedia" package.
 2001-05-31 21:54:07 +00:00
thorpej
996df042df Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER 
driver, since for our purposes, they are compatible.
 2001-05-31 20:30:21 +00:00
thorpej
1042f830e5 Regen; added several more PHYs. 2001-05-31 19:41:07 +00:00
thorpej
0c94166e28 Add several additional PHYs. 2001-05-31 19:40:33 +00:00
thorpej
f752c7d328 On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the 
BMSR are wired to 0, yet the PHY supports 10baseT.  So, to get around
this, we test the ANAR 10baseT bits after a PHY reset.  These bits are
set according to input pin 180.  If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
 2001-05-31 18:47:22 +00:00
thorpej
2128d9199a Enable frobbing the 1000baseT control register on Gig-E PHYs, 
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
 2001-05-31 18:44:48 +00:00
thorpej
628a67ab31 Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER 
10/100/1000 PHYs.
 2001-05-31 16:06:58 +00:00
thorpej
ea1aed7db2 Make the number of ticks between auto-negotiation tries PHY-specific, 
and default every PHY to 5 seconds (what we used before).  If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
 2001-05-31 16:02:29 +00:00
ad
f4afeda420 Reduce the delay when polling so that dumps go faster. 2001-05-31 11:31:43 +00:00
haya
4d3b32a658 Cosmetic change. 2001-05-31 08:33:40 +00:00
thorpej
ad090e7062 Regen; added NatSemi DP83891. 2001-05-31 03:32:38 +00:00
thorpej
3ae72855b1 Add product ID for the NatSemi DP83891 1000baseTX PHY. 2001-05-31 03:32:20 +00:00
thorpej
9f63d3cd86 Typo in last. 2001-05-31 03:07:14 +00:00
thorpej
f07f44812d The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR. 
Note this in a comment.  Add the 1000baseT CR and SR bits.
 2001-05-31 03:06:46 +00:00
nisimura
e7c225d7b2 Regen; product IDs for IDT RC32334 and RC32332 systeml controllers. 2001-05-31 01:13:33 +00:00
nisimura
811d8d9102 Add product IDs for IDT RC32234 and RC32334 system controllers. 2001-05-31 01:10:34 +00:00
bouyer
3fccfbf68d Uninitialised variables, from Krister Walfridsson: in umass_scsipi_request() 
initialize cmd before using it. Now that it's initialised earlier, use it
instead of xs->cmd
 2001-05-30 20:31:39 +00:00
bouyer
6973b27309 Uninitialised variable (from Krister Walfridsson): in acard_chip_map() 
drop compatchan and use the real channel number instead.
 2001-05-30 20:30:02 +00:00
bouyer
708bb529d3 uninitialised variable (from Krister Walfridsson): 
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
 2001-05-30 20:28:17 +00:00
lukem
d84d2c6c85 add missing #include "opt_kgdb.h" 2001-05-30 15:24:23 +00:00
mrg
c13e3a6693 use _KERNEL_OPT 2001-05-30 11:40:35 +00:00
haya
f591dd2f9d Cosmetic change. 2001-05-30 09:21:47 +00:00
chs
ffcbc851a0 fix some problems in sddump() with uninitialized variables. 2001-05-29 01:02:39 +00:00
bjh21
c5260261ba Use the pseudo-DMA facilities of the HCCS SCSI podule. Code largely derived 
from the pc532 "ncr" driver.

This gets me up to 300 KB/s from /dev/rsd0a on my A310.  I think
bus_space_{read,write}_multi_1 and copy{in,out} are the bottlenecks now.
 2001-05-28 22:54:10 +00:00
tshiozak
83da433ada fix for UX96 (and all Yamaha specific devices, hopefully). 
- fix how to get endpoint addresses.
  - fix allocate count of pipes.
  - add necessary null checks for asymmetry jacks.
 2001-05-28 20:52:06 +00:00
tshiozak
5505749bb1 add new device; Yamaha UX96 USB MIDI I/F. 2001-05-28 18:28:04 +00:00
onoe
a62b5c1e2e add a comment why IFF_PROMISC is handled separately for SIOCSIFFLAGS: 
Handle special case for IFF_PROMISC.  If only IFF_PROMISC
	flag is changed, do not call an_init() to avoid initiating
	reassociation to another access point.  It is really
	helpful for tcpdump(8).
 2001-05-28 00:46:35 +00:00
thorpej
ebf9e47c26 Add quirks for the Algorithmics P-5064 on-board 21143, and a way to 
get the Ethernet address from it (they don't have an SROM).

XXX The latter should be replaced with devprops when they exist.
 2001-05-27 21:00:33 +00:00
ragge
667dd41596 Remove ethernet CRC on received packets. 2001-05-27 19:36:06 +00:00
thorpej
47745a094d Add support for the Algorithmics ISA floppy controller. 2001-05-27 18:16:21 +00:00
thorpej
ce289cc293 Handle non-contiguous BARs. Needed to be able to configure e.g. 
IDE and USB on a PIIX3.
 2001-05-27 17:50:40 +00:00
bjh21
cbea766fd0 Add hcsc. 2001-05-26 23:02:06 +00:00
bjh21
5cc459efcc Quick hack of a driver for the HCCS 8-bit SCSI podule, based on the Oak driver. 
Tested to the extent that it finds my disc.
 2001-05-26 23:01:19 +00:00
bjh21
ebf4596009 regen 2001-05-26 21:48:31 +00:00
bjh21
eb6eb503f1 Fix typo in last commit. 2001-05-26 21:48:21 +00:00
bjh21
7b0faa44c9 regen 2001-05-26 21:47:30 +00:00
bjh21
d5ecc6c516 Add the 8-bit podules I got at Wakefield (except the A3000 Nexus, 
which seems not to work).
 2001-05-26 21:47:09 +00:00
ragge
41faed1386 Use cdev_decl() instead of local prototyping. 2001-05-26 21:24:38 +00:00
bjh21
6d8a82ebc2 Use bus_space on arm26. 
Update the comment to match list of bus_space-using ports.
Delete oak from list of drivers that need converting.
 2001-05-26 20:55:48 +00:00
bjh21
ab0637016a Support NCR5380_USE_BUS_SPACE. 
Add comments explaining the card a bit (and how badly we support it).
Add in-core RCSID.
 2001-05-26 20:53:53 +00:00
bjh21
bab53421c4 "oak" is now MI. 2001-05-26 17:50:30 +00:00
bjh21
c7a388d937 Turn "oak" into an MI podulebus driver. Tested on my new A310. 2001-05-26 17:49:46 +00:00
bjh21
f0ebb6c5a8 Add a comment about acemidi. 2001-05-26 17:47:45 +00:00
mjacob
c9de53f96e Create a kernel thread for Fibre Channel cards. This is the new 
way of doing business- modulo some startup spasms and peculiarities
of the way kthreads are started (*after* configuration, weird) and
some strangeness with the freeze/thaw code, what now happens is
that any of Loop Down, LIP, Loop Reset or Port Datbase or Name
Server Database Changed ASYNC events cause the queues to freeze
for this channel.  The arrival of a Loop UP is not relevant.

What *is* relevant is that the Port Datbase or Name Server Changed
async event indicate that it's okay to go and (re)evaluate the
state of the FC link and (re)probe local loop and fabric membership.
We have a kthread do this because it's *sooooo* much nicer to be
able to sleep while doing the 130-250 mailbox commands it'll take
to re-evaluate things.

When the state is well known again, we can unfreeze the channel
queues.  Then, as commands start arriving, we simply can start them
or bounce them with XS_SELTIMEOUT (if the device in question has
gone away).  Previously, we did lazy evaluation, which meant that
if a change occurred, we would wait until the very *next* command
to go rebuild stuff.

The reason this is not sensible is:

 a) Even with sleeping, you can hang up your system because you might be
 making some poor stat(2) call pay the price of re-evaluating the whole
 fabric.

 b) If we ever really want to get to dynamic attachment/detachment, we
 should find out sooner, rather than later, where things get to.

Split off ispminphys_1020 from ispminphys- a 1020 has a 24 bit limit-
not anything newer.

Re-enable LIPs and Loop Resets as async events- this allows the outer
layer to set policy about them.

Roll platform major && minor. Remove bogus waitq (no longer used).
Remove callout entry in softc (no longer used). Define some shorthands
for channels. Clean up a variety of cruft left over from the
thorpej_scsipi changeover.
 2001-05-25 21:45:55 +00:00
tshiozak
5b51f5ebe2 fix forgotten/malformed initialization of some variables. 
(pointed out by Krister Walfridsson.)
 2001-05-25 19:33:36 +00:00
hannken
339a9c8de2 Fix two typos in the BYTE_ORDER != LITTLE_ENDIAN case. 2001-05-25 08:54:40 +00:00
itojun
6229248ec0 minor style 2001-05-24 08:12:28 +00:00
itojun
85efd7edb1 correct multicast filter handling. without this, we cannot run IPv6 on an*. 2001-05-24 08:06:04 +00:00
petrov
9d59ae231c adjust fas register fields names 2001-05-23 18:32:26 +00:00
bouyer
a98b728b88 Call scsipi_channel_thaw() after scsipi_done() so that command ordering 
is preserved.
 2001-05-23 15:51:32 +00:00
bouyer
72b4ba8aed In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue(). 2001-05-23 15:50:32 +00:00
chs
fae4d6d720 fix typo in previous revision so that the scsi code compiles again. 2001-05-23 02:16:19 +00:00
fvdl
24b32e8f08 Add missing definitions for hw checksumming. 2001-05-23 00:56:58 +00:00
mjacob
d298a26243 Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async 
notifications. Let each platform set policy as to what to do
with these.
 2001-05-22 19:32:41 +00:00
mjacob
b9eb902304 Make SDRETRIES an option you can dig out of opt_scsi.h. 
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
 2001-05-22 18:59:57 +00:00
mjacob
38f6ada8b6 Add SDRETRIES and SD_IO_TIMEOUT option for sd. 2001-05-22 18:58:15 +00:00
thorpej
607b14bf7b Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham. 2001-05-22 16:58:23 +00:00
thorpej
a888f6ef73 If the cache line size in the BHLC register is not configured, 
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
 2001-05-22 16:10:44 +00:00
soren
79859fb138 Regen. 2001-05-22 16:07:56 +00:00
thorpej
6e2bc5b352 Enable the PCI MWI command for memory writes on the i82558 and 
higher.
 2001-05-22 16:05:01 +00:00
soren
b16ba1d8cd Add i82562ET id. 2001-05-22 16:04:27 +00:00
thorpej
188e0d6625 Some changes from the new FreeBSD `fxp' driver: 
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
  reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
  "Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559.  This is all handled
  transparently by the hardware.  When in promiscuous mode, allow
  wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559.  This places two
  Transmit Buffer Descriptors directly in the TxCB, which should cover
  the vast majority of packets transmitted.  This saves PCI transactions
  that would otherwise be required to fetch the TBD list.

With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
 2001-05-22 15:29:30 +00:00
bouyer
2a604875d6 Remove one extra byte from scsipi_mode_select; pointed out by Juergen 
Hannken-Illjes.
 2001-05-22 15:14:24 +00:00
augustss
e25bf167a1 Regen. 2001-05-22 10:43:15 +00:00
augustss
f43e2c6ba1 Add Scanjet 4300. 2001-05-22 10:38:56 +00:00
thorpej
a5a03e13dd Report 82558, 82559, etc. based on chip revision. Also, remember which 
revsion we have for feature enables later.
 2001-05-22 01:23:25 +00:00
jhawk
4af61a686a oops. Make it compile. 2001-05-22 00:43:12 +00:00
jhawk
b5805fa0c8 Sigh. Regen correctly. 2001-05-22 00:41:52 +00:00
thorpej
611e112566 A little slight cleanup. 2001-05-22 00:27:01 +00:00
jhawk
7a31dfa328 Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303. 
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
 2001-05-22 00:18:03 +00:00
thorpej
fb4607ec45 Add some additional register definitions, from FreeBSD. 2001-05-22 00:07:32 +00:00
thorpej
0064d69faf Re-arrange the transmit control data somewhat so that we can 
use the extended TxCB format (that change will happen later).
 2001-05-21 23:58:44 +00:00
minoura
92d92b1cb2 Correct an easy mistake in initializing gain registers. 
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
 2001-05-21 23:55:04 +00:00
thorpej
65ac078927 Sigh, typo in last. 2001-05-21 23:21:27 +00:00
thorpej
00f922fa70 Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also 
increase the number of Rx buffers from 64 to 128.

These mirror some performance tweaks made to the sip(4) driver.
 2001-05-21 22:20:31 +00:00
thorpej
afdab0cab8 The ICH3 also has the Resume Bug. 2001-05-21 22:12:08 +00:00
thorpej
a0f9e3c6fb Regen; add ICH3 network controller IDs. 2001-05-21 22:11:31 +00:00
thorpej
6b51adfbff Add ICH3 network controller IDs. 2001-05-21 22:11:06 +00:00
thorpej
d84e2452ea Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they 
have the same value).
 2001-05-21 21:49:51 +00:00
thorpej
b4538a0165 The 82801BA built-in Ethernet has a bug which requires us to 
issue a NOP before a CU_RESUME when in 10baseT mode.  Handle
this.
 2001-05-21 21:47:52 +00:00
thorpej
e7a0ef6145 ANSI'ify. 2001-05-21 20:59:38 +00:00
jhawk
ecb3a30463 add $NetBSD$ 2001-05-21 20:47:13 +00:00
mjacob
3462fe5d99 Remove reference to adapter_q in scsipi structure. Comment about the 
usage of channel_q.
 2001-05-21 15:50:46 +00:00
ichiro
598241f757 add product COREGA FEther-PCC-TXF 
kern/11357 and report from goro@venus.dti.ne.jp
 2001-05-21 13:48:25 +00:00
ichiro
fd7d5008e8 regen 2001-05-21 13:45:10 +00:00
ichiro
4108bc4645 add product COREGA FEther PCC-TXF 2001-05-21 13:44:48 +00:00
christos
2ed6d9dbf7 PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size 
CDB (16 instead of 12).
 2001-05-20 21:07:58 +00:00