34f8cc760a
leinit: we always have at least one address now.
1995-06-27 19:54:49 +00:00
e80271fbe0
Get things from libsa now.
1995-06-27 15:57:13 +00:00
b4c3997cb9
Support functions for NFS boot (get server address and root path).
1995-06-27 15:32:40 +00:00
539a3bff11
Modified to do less copying, and to allow determination of
...
the address from whence the reply has come.
1995-06-27 15:28:58 +00:00
1fe28794f3
Fix ARP opcode, add more debugging prints.
1995-06-27 15:27:24 +00:00
55eb5a12f1
Re-work for new rpc interface, and simplify a bit.
1995-06-27 15:25:30 +00:00
d7e1ef6af2
Pad HEADER_SIZE for alignment.
1995-06-27 15:23:18 +00:00
0e4efb30ef
Pad the request out to the minimum Ethernet length.
...
Improve some debug prints...
1995-06-27 15:18:57 +00:00
29b61e2253
Add/correct some cache-flush logic to deal with the fact that the
...
VAC has ref/mod bits that need write-back treatment.
1995-06-27 14:44:47 +00:00
d5761f14d9
Fix uses of btoc() which requires an unsigned arg.
1995-06-27 14:42:34 +00:00
6b6502194f
Fix warnings about setjmp arg.
1995-06-27 14:40:14 +00:00
f82c63a641
Remove temporary __BDEVSW_DUMP_OLD_TYPE (our dumpsys is safe 8^)
1995-06-27 14:38:22 +00:00
6548befa4f
Nuke user-mode DELAY() macro.
1995-06-27 14:37:22 +00:00
3a59870c12
Leave modem control lines in correct state on interrupted open.
...
(From sparc/dev/zs.c)
1995-06-27 14:36:20 +00:00
f872dedb62
Catch up with net/if.h changes
1995-06-27 14:34:32 +00:00
5ad7f31079
udpate to match ifnets new use of sys/queue.h
1995-06-27 13:13:32 +00:00
e0f9279f31
update for current configuration descriptions
1995-06-27 00:54:55 +00:00
09e284bcca
Fix null VP references (pr 1124) - from John Kohl
1995-06-27 00:15:13 +00:00
5be81bd012
Fix null VP references (pr 1124)
1995-06-27 00:12:21 +00:00
09ea33db05
Do away with ROM printf.
1995-06-26 23:45:06 +00:00
a50ba2b546
Adapt to new lib{sa,kern} regime.
1995-06-26 23:26:57 +00:00
ad4af073cd
Updates from Matthias Pfaller. (leo@marco.de)
1995-06-26 23:13:54 +00:00
c7df493055
SMD disk driver, from Chuck Cranor.
1995-06-26 23:06:57 +00:00
70b6d95d44
xd definitions, from Chuck Cranor.
1995-06-26 23:01:06 +00:00
35ad7a1ff3
xd driver entries, from Chuck Cranor.
1995-06-26 23:00:32 +00:00
4f4e4826a6
xd definitions, from Chuck Cranor.
1995-06-26 23:00:31 +00:00
d918ea9e14
xd driver entries, from Chuck Cranor.
1995-06-26 22:59:54 +00:00
3c17e9e63f
isbad(), for Chuck's new xd driver.
1995-06-26 22:57:29 +00:00
34c8ad8c30
Define dvma_map{in,out}() to map a buffer into DVMA space. These are
...
safe for use at interrupt time.
Implement vmapbuf() and vunmapbuf() in terms of these new functions.
1995-06-26 22:46:04 +00:00
68e9c36909
Allocate/initialise DVMA maps and base address.
...
The fact that `phys_map' is split in half for different kinds of DVMA
allocations is not ideal..
1995-06-26 22:41:23 +00:00
affbc4d346
Define variables and macros for DVMA allocation using rmaps.
1995-06-26 22:36:32 +00:00
04977f87e0
sl_xxx2 -> sl_pcylinder, for Chucks new xd driver.
1995-06-26 22:09:47 +00:00
47ce042b76
Small optimisation & 1 fewer depedency on zs_ctty.
1995-06-26 21:45:31 +00:00
45eb69b276
Use ZS_DELAY() in a few more places (from Gordon Ross, cf. sun3/dev/zs.c).
1995-06-26 21:32:51 +00:00
abe8c288fb
Sync grf with underlying view on open.
1995-06-26 19:55:45 +00:00
c35bc29cc9
Fix PR1160... (bug with the new compat_util prefix)
1995-06-26 19:27:17 +00:00
f205966027
The atari specific code can be removed now it is using MACHINE_NONCONTIG.
1995-06-26 14:40:11 +00:00
0d1035fa62
Fix thinko. It will now also work when no mouse is configured.
1995-06-26 14:31:27 +00:00
2b7d3527a2
define and set PTDpaddr (pyhs addr of kernel PTD)
1995-06-26 13:26:26 +00:00
db66a978e9
IdlePTD has been gone for a while. PTDpaddr now exists.
1995-06-26 13:25:29 +00:00
336e8d4de0
prototype inittodr and resettodr
1995-06-26 10:39:20 +00:00
59e990a56b
check CMOS time against base time, for sanity. if CMOS time invalid,
...
warn user and user base time. if base time < 1985, warn the user.
if base time 5 or more years different than clock time, warn user,
and if it's base time that's greater, use it. (The latter case is
handy if one has a machine in which the CMOS battery is dead... I do.)
1995-06-26 10:14:05 +00:00
23e75a550d
fix typo
1995-06-26 08:46:16 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
c8858650b0
DEBUG -> FD_DEBUG, so this thing doesn't spew when used with options DEBUG
1995-06-26 05:47:40 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
35bea7d1f4
use new-style block device dump functions. (most intelligence here now.)
1995-06-26 05:22:53 +00:00
5ccd187ba5
reserve VM to map pages being dumped
1995-06-26 05:21:58 +00:00
dd3e2df4a7
make dump stubs consistent. fix other piece of code to compile
...
properly with DEBUG; used bogus variable.
1995-06-26 05:20:40 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
d093e5d8b8
make dump stubs consistent
1995-06-26 05:15:33 +00:00
ac9043055a
oops; i meant __BDEVSW_DUMP_OLD_TYPE, not __BDEVSW_DUMP_OLD_FORMAT
1995-06-26 05:14:17 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
2d045e2f16
prototype the dump function pointer, if __BDEVSW_DUMP_OLD_FORMAT not defined
1995-06-26 05:09:37 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
2a17942096
Add the ability to override COMPATREL and COMPATDST similar to libkern
1995-06-26 03:27:13 +00:00
2cb09c2709
Add the ability to override KERNREL and KERNDST.
1995-06-26 03:25:46 +00:00
e14fb59c60
Fix building of libkern that broke with yesterday's fixes
1995-06-26 03:24:17 +00:00
81d3868e70
missed one fdopen
1995-06-26 02:34:01 +00:00
76a5f59729
setup pcb in cpu_fork.
1995-06-26 01:52:53 +00:00
4230801c92
be sure of product from Ezra Story <ezy@panix.com>
1995-06-26 01:49:05 +00:00
2937872ca5
typo fix from Daniel Widenfalk <t94dwi@student.tdb.uu.se>
1995-06-26 01:42:08 +00:00
d6e4fd6e10
fix for sprite problem from Kenneth Dyke <kcd@babylon5.jumpgate.com>
1995-06-26 01:39:55 +00:00
2321aeb62a
Reserve arguments 2-4 for SunOS loaders; pass DDB stuff in args 5 and 6.
1995-06-25 23:26:21 +00:00
008504e597
Define IO-cache bit for sun 4/400 machines.
1995-06-25 23:15:58 +00:00
95733d9732
add a couple more sun4m bits.
1995-06-25 21:34:28 +00:00
4abd54fe69
Mouse driver added.
1995-06-25 19:05:23 +00:00
a734709115
Oops... NOARGS for compat_43_sigvec.
1995-06-25 14:58:17 +00:00
e1731cd1bf
syscalls.master changed.
1995-06-25 14:18:56 +00:00
de17480671
sigvec -> compat_43_sigvec.
1995-06-25 14:18:35 +00:00
09e0072b98
Add sunos_emul_path (/emul/sunos). I don't know if this is correct, but
...
this will at least aid the compilation step and is similar to the
others.
1995-06-25 14:15:08 +00:00
600cdad805
Stupid typo in last.
1995-06-25 14:02:09 +00:00
50d8509da2
Stupid pasto in last.
1995-06-25 13:53:21 +00:00
0958ef72c8
Add libcompat.
1995-06-25 13:39:37 +00:00
c9917aa539
* Don't include sys/exec.h explicitly--it's not protected against multiple
...
inclusions and compat_util.h now includes it.
* Declare struct emul *e=p->p_emul in a couple of places so we can use
STACKGAPBASE macro (should this macro be modified to take a struct
emul * or struct proc * parameter?).
* Declare extern struct emul emul_sunos for sunos_sigvec's comparison.
1995-06-25 13:11:44 +00:00
2a153a49b1
Fix the clean target.
1995-06-25 13:06:32 +00:00
4d6069140b
Get the units right...
1995-06-25 04:49:05 +00:00
b1addb6674
Patches from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de)
...
and Daniel Risacher (magnus@mit.edu ). Apparently with some
helpful discussion from John Wittkoski (jpw@insoft.com ).
This works on my IIcx and IIsi. Still needs a bit of cleaning up.
1995-06-25 03:24:09 +00:00
b1598cdd1b
Remove a compile warning.
1995-06-25 02:46:46 +00:00
fc6fb65d62
Do something a lot closer to the right thing for FPU_EMULATE/FPSP/040
...
and subsets thereof.
1995-06-25 02:45:14 +00:00
f9f989f545
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 21:14:40 +00:00
8d8973280c
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:48:36 +00:00
a5c53e5068
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
1995-06-24 20:47:36 +00:00
98df248f95
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:46:09 +00:00
dbc54ab48e
For a mmu3/sun4 too, it will suffice to just map the first 16MB.
1995-06-24 20:42:59 +00:00
7f0e620523
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:41:28 +00:00
3cb270c7ee
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
1995-06-24 20:40:45 +00:00
a94817a5de
GENERIC: Add COMPAT_IBCS2 in too by default.
...
Makefile.`arch`: - Add -lcompat
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:39:40 +00:00
fc741845e6
Stackgap_init() now takes an p->p_emul argument.
1995-06-24 20:36:28 +00:00
1a5a3c9199
Extracted all of the compat_xxx routines, and created a library [libcompat]
...
for them. There are a few #ifdef COMPAT_XX remaining, but they are not easy
or worth eliminating (yet).
1995-06-24 20:33:55 +00:00
fc5a8cffa2
Build libkern in the kernel compilation directory, like libcompat.
1995-06-24 20:31:12 +00:00
d0169ce44a
Use compat_util.[ch]
1995-06-24 20:29:17 +00:00
5ad8a15866
Syscalls.master was changed
1995-06-24 20:26:41 +00:00
57b6b2745e
Use compat_util.[ch]
1995-06-24 20:22:33 +00:00
6b95b513b0
Use compat_util.[ch].
1995-06-24 20:20:04 +00:00
3a3aa6407e
Use compat_util.[ch]
1995-06-24 20:18:53 +00:00
8207f8e49e
Use the new compat_util.h
1995-06-24 20:17:54 +00:00
dcb2a50b2b
- Extracted all compat routines from the kern directory and moved here.
...
- Created compat_util.c and compat_util.h to be used by the compatibility
modules, so they don't duplicate the same code.
- Added prototypes to the stackgap allocation routines.
1995-06-24 20:15:55 +00:00
cbcf8eee8a
Check for invalid filedescriptors in getmsg() and putmsg().
1995-06-24 18:47:08 +00:00
5781a8dcc0
The kernel is called netbsd, not vmunix.
1995-06-24 17:24:24 +00:00
4f05f7e8f6
pmap_page_index isn't a macro.
1995-06-24 16:18:50 +00:00
d8264613c8
add entry for another tweaked Texel CD-ROM. from pr 1151
1995-06-24 01:22:30 +00:00
20d86b44f2
Assume kernel is < 16MB in size,
...
Massage the a few control bits before remapping (from David S. Miller).
1995-06-23 15:44:34 +00:00
ad8e3ed225
Sync with net/if.h
1995-06-23 13:19:44 +00:00
611c2dbdc8
fix typo
1995-06-23 01:33:43 +00:00
1dadb15deb
Remove DIAGNOSTIC
1995-06-22 23:24:18 +00:00
1634acc3e4
Include file change.
1995-06-22 21:35:42 +00:00
c4aaa6000c
* Changed to use generic ELF code from kern/exec_elf.c (which was taken
...
from the svr4 exec code plus the linux compat mods)
* Include file change
* Add multicast sockopts (from John Brezak)
1995-06-22 21:34:27 +00:00
4a10f838e7
Changed to use generic ELF code from kern/exec_elf.c (which was taken
...
from the svr4 exec code plus the linux compat mods)
1995-06-22 21:32:57 +00:00
42d57ae04f
Generic ELF exec include file, like the other exec_xxx include files.
1995-06-22 21:31:03 +00:00
8ef93cbcf5
Generic mi ELF loader; delete Linux and Svr4 compat conf entries and
...
add generic ELF entry to exec_conf.c
1995-06-22 21:29:47 +00:00
456f07b9a2
Add mi ELF files.
1995-06-22 21:27:45 +00:00
3ddc81510c
Add avail_end to keep ps and friends happy. Possibly a short-term fix.
1995-06-22 03:08:29 +00:00
1ccd38d9e1
Don't use constants for addresses. VA != PA...
1995-06-21 03:59:07 +00:00
6907f7f64d
fix reference to incorrect struct (paste-o)
1995-06-21 03:56:09 +00:00
229ed22747
Add function to reconfigure addresses when ROM is remapped.
1995-06-21 03:46:52 +00:00
2beeae8058
Lots of changes from hp300.
...
Removed MACHINE_NONCONTIG conditionals. Only support that
configuration, now.
Some cleanup.
1995-06-21 03:45:10 +00:00
49b9eb5e4d
A number of clean-up related changes and a few changes relating to
...
the new mapping. "real mem" is now correct for MACHINE_NONCONTIG
machines. MACHINE_NONCONTIG conditionals have been removed--only
support that case, now.
1995-06-21 03:41:51 +00:00
778adb81d1
Bring in 040 code from hp300 port.
...
Remove memory mapping code.
Update cpu_switch and a few other functions from hp300 port.
1995-06-21 03:36:27 +00:00
3d04799c79
Remove warning.
1995-06-21 03:20:58 +00:00
19b569364f
Cleanup some--needs more pruning.
1995-06-21 03:20:22 +00:00
37b6dc390f
Put page mapping code into a C module.
...
Remove old 040 version of page mapping--new way handles 040, too.
Derived from hp300 pmap_boostrap.c.
1995-06-21 03:19:35 +00:00
4a9e8ef39f
Raise MAXTSIZ, double DFLDSIZ and quadruple MAXDSIZ. Lower USRPTSIZE.
...
Remove unused mapin() macro. Update VM_MAX* macros to look like the
amiga's (easier to read than hp300's).
1995-06-21 03:17:06 +00:00
5dd8297b11
Cleanup some and make these look more like hp300 versions.
1995-06-21 03:14:06 +00:00
23622438bf
Get rid of pcb_cmap2.
1995-06-21 03:10:44 +00:00
c2184f6f5b
Update to look more like hp300. Clean up a lot.
1995-06-21 03:08:29 +00:00
04834fb800
Remove cpu_set_init_frame() define.
...
Remove BROKEN_SWAP
Change cpu_swapout() to null-op.
Remove profile_tick() define.
Add some 040 stuff and make other 040 stuff compat. with hp300 port.
Cleanup a bit.
1995-06-21 03:06:33 +00:00
7542473d6d
Clean up I/O base settings a bit.
1995-06-21 03:03:13 +00:00
697011742c
Add some debugging (conditional on DEBUG). Add a more correct probe for
...
internal video. Clean up nubusprint() a bit.
1995-06-21 02:59:08 +00:00
e4ff96e47c
Make NUBUS_BASE_TO_SLOT and reverse not depend on VA==PA for NuBus.
...
Add constant for DRSW_FARALLON.
1995-06-21 02:57:19 +00:00
6ff2537ad3
Make no assumptions about the absolute address of nubus cards.
1995-06-21 02:52:09 +00:00
cb00a78de3
Treat 0 as a failure case for ae_id_card() and take out
...
null-op check for a 0 addrlist in init.
1995-06-21 02:50:22 +00:00
f462aa095a
Be a bit more careful on the probe... Make sure that the current slot's
...
addresses contain the int_video_start--or assume that internal video is
is "slot" 0xE.
1995-06-21 02:48:00 +00:00
1eec6bfc33
Add pmap_bootstrap.c and take out mac68k_init.c.
1995-06-21 02:43:19 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
1d65cdd4ab
#include <sys/cdefs.h>.
...
Wrap __flt_rounds() declaration with __BEGIN_DECLS/__END_DECLS.
1995-06-20 20:32:22 +00:00
3176641085
fix pr 1128; change vfs_bufstats defn from DIAGNOSTIC - > DEBUG
1995-06-20 10:42:33 +00:00
67bfc330f1
Fix a typo that's gone unnoticed for a long time. Noticed by Brian
...
Gaeke (brg@dgate.org ).
1995-06-20 05:13:19 +00:00
9526317aa1
vendor IDs for Acer and SIS
1995-06-20 04:50:43 +00:00
1e4957e020
oops; export that head definition to non-kernel code.
1995-06-19 21:57:28 +00:00
d925296265
define a type for the ifnet queue's head.
1995-06-19 21:41:37 +00:00
a68aae96fc
David Leonard (leonard@dstc.edu.au) noticed an embedded comment
...
delimiter in a comment within a #define (ZSWR14_DTR_REQ). Inserted
spaces in case someone wants to use this define at some point.
1995-06-19 13:15:08 +00:00
caa1421dd6
Add FPSP back.
1995-06-19 03:55:15 +00:00
6f06373e06
Take out M68040, add a more specific swap and add vnd.
1995-06-19 03:53:58 +00:00
8b16cd6552
reenable kernel debugger; new location more amenable to tweaking.
1995-06-18 20:14:44 +00:00
f90cf78fba
convert pcb lists to CIRCLEQs, so that the end can be looked at more
...
easily, and so that the original (insque/remque) logic can be effectively
mimiced. (This fixes a bug in the previous set of list changes.)
also (since terminator is no longer null) reinstate uninitted list checks,
but mark them XXX.
1995-06-18 20:01:08 +00:00
8f62c773e8
don't assume the f_fsnamelen is nul-truncated or longer than MFSNAMELEN
1995-06-18 14:45:14 +00:00
2f62eae02d
Checkpointing ... still has a couple of problems but it is better.
...
(include/{icu.h,psl.h} should be listed as part of this checkpoint.)
1995-06-18 07:18:02 +00:00
8142065452
Updating to be like i386 version.
1995-06-18 07:13:46 +00:00
6664ae1ddd
Add another CD-ROM drive to The List.
1995-06-18 05:13:09 +00:00
3722386a41
use new pcireg.h macros
1995-06-18 02:36:41 +00:00
4f7335a75a
macros to split out various parts of PCI registers, adjust constants
...
to match. (now, comparisons are comparisons, code doing them doesn't
have to mask.) define types for the various parts of the registers'
contents, where practical.
1995-06-18 01:34:01 +00:00
c4640b104d
define and call "pci_devinfo()", which creates a string from the
...
vendor & product IDs and class information, which is printed if device
isn't found. Optionally (via "PCIVERBOSE" option) does table lookup
to try to see if it knows what the device really is (informational only...).
1995-06-18 01:28:23 +00:00
e86a68a339
prototype for pci_devinfo function
1995-06-18 01:26:50 +00:00
c644446a99
add include for the alpha, alphabetize
1995-06-18 01:24:40 +00:00
8ced60f181
make a comment reflect the way things should be done
1995-06-18 01:23:11 +00:00
2cfceff6b5
built from pcidevs list
1995-06-18 01:09:14 +00:00
27adbb1130
learn about some PCI vendor and product numbers. not yet used
1995-06-18 01:07:04 +00:00
ae76c070ec
oops; forgot this in last commit
1995-06-17 23:06:44 +00:00
6f13f2448a
more appropriate name, as this only has PCI support subroutines.
1995-06-17 22:40:26 +00:00
63a9ff56e7
rudimentary DDB support.
1995-06-16 15:36:37 +00:00
7aaf918c75
d_reset reference removed. Calling of ubareset must be solved.
1995-06-16 15:26:11 +00:00
8a9fcc717d
DELAY() moved to common place.
1995-06-16 15:23:53 +00:00
2a7adb567d
Some flags added to use in boot blocks.
1995-06-16 15:20:11 +00:00
913f0b045e
DDB support. splddb() and trapcode for ddb.
1995-06-16 15:17:27 +00:00
a1761db1f5
DELAY() removed, now common.
1995-06-16 15:14:05 +00:00
e9aa7f52a2
ddb file added.
1995-06-16 15:09:56 +00:00
e11e0f1712
Passing symtab address to kernel.
1995-06-16 15:07:58 +00:00
988e66c172
Pass symtab address to kernel.
1995-06-16 15:06:50 +00:00
d0601a093f
copy some format specifiers from kprintf to sprintf. b & r still missing
1995-06-16 10:52:17 +00:00
7d0e5e8589
Use ${.CURDIR} in S macro definition so makefile works with obj directories.
1995-06-16 07:23:02 +00:00
fec7ba6562
Rearrange slightly.
1995-06-16 04:45:22 +00:00
1305dc32df
Put parentheses around macro arguments
1995-06-16 02:07:33 +00:00
94b7cf1b85
compensate for timeval/timespec/stat structure changes.
1995-06-15 23:22:41 +00:00
a134771cd6
posixization of timeval, timespec, and stat structs
1995-06-15 23:08:08 +00:00
8e5127c2e7
adjust for the other day's structure changes; make it compile.
1995-06-15 22:38:20 +00:00
e01e3d8204
lose extraneous comma
1995-06-14 05:24:46 +00:00
d82ae8cad9
Fix cpuspeed values for Carerra and similar.
...
Enable the virtual address cache on the 3/260
1995-06-13 22:21:40 +00:00
b029c12ac1
Moved delay2us to param.h (now an inline function).
1995-06-13 22:16:38 +00:00
cd13e583aa
Provide delay2us as an inline and make it reasonably accurate,
...
but conservative (long) by a factor of about 1.25
1995-06-13 22:14:24 +00:00
64543c95b6
Fix several missing (and REQUIRED) calls to ZS_DELAY()
1995-06-13 22:11:33 +00:00
11ab4427ec
Fix warning about setjmp arg
1995-06-13 22:06:58 +00:00
abdeca89ce
Change llinfo_x25 to use queue.h.
1995-06-13 09:07:29 +00:00
7d87f9110f
Clean this up a bit. Use queue.h more; de-uglify casts.
1995-06-13 08:36:58 +00:00
4b83f9cc67
Change llinfo_llc to use queue.h.
1995-06-13 08:12:33 +00:00
3bcdd7fb97
Replace an insque()/remque() pair I missed.
1995-06-13 08:11:37 +00:00
a92b154a68
Touch this up so it compiles again.
1995-06-13 07:58:10 +00:00
3c833d10fc
Clean this up a bit. Use queue.h more; de-uglify casts.
1995-06-13 07:13:14 +00:00
1631c3544b
clear m_ext.ext_free when marking an mbuf has having external storage.
...
From Jonathan Stone <jonathan@DSG.Stanford.EDU>.
1995-06-13 06:43:51 +00:00
d2307f3ecb
Update to match data structure changes.
1995-06-13 05:52:42 +00:00
39b1a58316
Update to match data structure changes.
1995-06-13 05:41:43 +00:00
415057458b
Update to match data structure changes.
1995-06-13 05:38:47 +00:00
80a0cdd913
There's no reason to set if_next here.
1995-06-13 05:31:00 +00:00
66f34029e5
Leave pseudo-device prom in for now (even though it doesn't work)
...
so config will create prom.h
1995-06-12 19:05:43 +00:00
cd7edee1ca
in_pcbnotify*() don't return anything.
1995-06-12 06:49:55 +00:00
351cfd5ed8
Fix bogon in previous.
1995-06-12 06:48:54 +00:00
22687aa834
Change in_pcbnotify*() to take an errno value. Make inetctlerrmap[] an
...
array on ints, not u_chars.
1995-06-12 06:46:34 +00:00
10a4696964
Oops. Make source quench work again.
1995-06-12 06:24:21 +00:00
c88cf97b34
Clear the MFC entry's statistical counters when doing an upcall.
1995-06-12 03:05:12 +00:00
4cabe662ac
Make sure to initialize ifnet correctly.
1995-06-12 02:22:13 +00:00
e0d6716b6a
Various cleanup, including:
...
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
1995-06-12 01:09:20 +00:00
6897f39ae9
Various cleanup, including:
...
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
1995-06-12 00:46:47 +00:00
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
1e070197f4
Go with the flow; use `/emul/sunos' pseudo-root (from Matthew Green).
...
Note: sunos_stat() and sunos_lstat() were added too.
1995-06-11 22:33:50 +00:00
769310e81d
Linux select() returns the amount of time left before a timeout would have
...
occured in the timeval structure. Emulate this behavior. Reported by
Theo de Raadt.
1995-06-11 21:51:38 +00:00
f9337c3f1e
Oops. Decrement rtt earlier.
1995-06-11 21:36:04 +00:00
2be9b519ac
As suggested by Brakmo and Peterson:
...
* Don't add the extra 1/8 of the mss when ramping up the congestion window.
* Scale the RTT values slightly to adjust for rounding errors.
* Set the lower bound of the RTO to RTT+2.
1995-06-11 20:39:22 +00:00
ca120e393c
Do extra comparison against linux_elf emul struct pointer to see what
...
we are emulating (unfortunately).
1995-06-11 20:24:42 +00:00
0cdb827026
Add Linux ELF module to the list of things to try.
1995-06-11 20:22:12 +00:00
fb777788b1
Don't forget to acknowledge that all the ELF stuff was taken from
...
Christos' svr4 code.
1995-06-11 15:15:09 +00:00
8bf395c808
Make this link when SYSVXXXX is not enabled too.
1995-06-11 15:07:55 +00:00
a22d72bf4d
* Always kill all vm_cmds before giving up on loading an executable
...
* Don't try to use auxiliary arguments with statically linked executables.
* Remove 'cannot find interpreter' uprintf, as other exec modules may
succeed in running the binary after all, and then we don't want this message.
* Some linkers produce rw- for the data segment, not rwx.
* Remove a few debugging printfs
1995-06-11 15:06:11 +00:00
bfc9b29ab2
Remade these after syscalls.master had changed.
1995-06-11 14:57:56 +00:00
fc7cfb5f0b
* Make Linux ELF binaries work. Lots of code duplication, but it will have to do
...
for now.
* Add a sanity check in linux_uselib
1995-06-11 14:56:47 +00:00
4ce5bb3dd4
Check for inflated congestion window during header prediction, per Bramko and
...
Peterson.
1995-06-11 09:36:28 +00:00
abd4cc9991
Remove /dev/zero special case. It's done in mmap().
1995-06-10 22:45:15 +00:00
b1868d1bdf
Set st_rdev in SVR4 struct stat.
1995-06-10 22:44:18 +00:00
1e1e52e395
Rename the dirent fields to match Linux. Make sure the requested buffer
...
is no larger than MAXBSIZE.
1995-06-10 22:19:06 +00:00
c049178b03
Deal with unrecovered boot devices.
1995-06-10 21:48:29 +00:00
914666b4f0
Temporary! Should be merged into libsa...
1995-06-09 22:26:18 +00:00
7fb30c51c8
Add install target, etc.
1995-06-09 22:24:06 +00:00
f950c931e0
Oops, that was a binary...
1995-06-09 22:23:44 +00:00
a4310ae56e
Several fixes and cleanup: make close work; stop in prom if debug mode...
1995-06-09 22:23:01 +00:00
e4a7bfeef8
cosmetic
1995-06-09 22:21:00 +00:00
94ef91135d
Add install target, etc.
1995-06-09 22:20:17 +00:00
c903596f3c
New: a netif compatible interface to the Sun PROM network drivers.
1995-06-09 22:19:25 +00:00
c3fdd9aa60
Add BINDIR
1995-06-09 22:18:04 +00:00
2f9ec64621
Add install target, etc.
1995-06-09 22:17:19 +00:00
dbef525da2
Add install targets, etc.
1995-06-09 22:03:41 +00:00
8e179d8e95
Have netboot!
1995-06-09 22:02:39 +00:00
20ff880de8
More liberal check for exec header. Nuke machine type defines (support all)
1995-06-09 21:58:32 +00:00
5a7b959d02
Moved to ../stand/netboot
1995-06-09 21:55:47 +00:00
b80b4c93a5
Retool for native build.
1995-06-09 21:53:27 +00:00
56dc7b26ad
Atari no longer uses the default db_read/write functions.
1995-06-09 20:03:05 +00:00
73c861e2e3
Handle mouse and other packages received from the keyboard correctly.
...
The initialisation now resets the keyboard and disables all packages
that make no sense because their drivers are not activated.
1995-06-09 20:00:14 +00:00
91bada6a66
Fix grfmmap()
1995-06-09 19:55:13 +00:00
18e5707a34
Add our own low-level access functions for ddb. This makes sure that
...
the system won't hang when referencing a non-existend page.
1995-06-09 19:53:45 +00:00
9f6e63c66b
Add our own db_memrw.c for ddb.
1995-06-09 19:50:42 +00:00
13af15620a
Show FPU_EMULATE exists
1995-06-09 19:49:27 +00:00
f8c615afc9
Make hardware locations u_char instead of char
1995-06-09 19:47:30 +00:00
2644faf340
Fix thinko
1995-06-09 19:45:42 +00:00
80bf490a56
Support & require MACHINE_NONCONTIG
1995-06-09 19:42:22 +00:00
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
8e556dece3
Change default optimization level from -O to -O2.
1995-06-09 06:44:41 +00:00
9999c610fb
Updated To.Do
1995-06-09 06:03:45 +00:00
36c6fc31be
Various updates for the new NCR scsi driver and tweeks to the interrupt
...
code. (From Matthias Pfaller)
1995-06-09 05:59:56 +00:00
a8674363a7
Replacement of the NCR driver by the Leo Weppelman NCR driver as
...
ported by Matthias Pfaller (Thanks to both!) and a RCS id.
1995-06-09 04:36:14 +00:00
d37674426a
"Always compile before you commit."
1995-06-09 02:19:47 +00:00
d7e904a697
Fix various signal handling bugs:
...
* If we got a stopping signal while already stopped with the same signal,
the second signal would sometimes (but not always) be ignored.
* Signals delivered by the debugger always pretended to be stopping
signals.
* PT_ATTACH still didn't quite work right.
1995-06-08 23:51:01 +00:00
90caf013ba
In the interrupt routine, bail out if we've not been initialized, yet.
1995-06-08 12:52:02 +00:00
mellon