239bc62b37
Add a makefile.
1998-08-15 03:57:58 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
08ab3f8338
I didn't write any of this.
1998-08-15 03:36:34 +00:00
06b7eb9001
Explicitly dereference the route timer expiration function pointer.
1998-08-15 03:17:21 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
2b869a383f
Use _CS_OFISA_MD_* callbacks for old, broken OpenFirmware builds.
1998-08-15 02:59:01 +00:00
2a48768678
Debug inst_unconditional_flow_transfer and next_instr_address
...
macros so that single stepping works correctly.
1998-08-15 02:57:28 +00:00
dd769acbfb
Name some constants consistently between drivers.
1998-08-15 02:37:50 +00:00
cc84859459
Map the EISA registers correctly!
1998-08-15 02:30:56 +00:00
196dfd7597
Always map the EISA configuration registers.
1998-08-15 02:26:31 +00:00
e9c5407d64
Only map the amount of space the device actually occupies.
...
Part of PR #5279 , Martin Musemann.
1998-08-15 01:59:25 +00:00
93eb06f9f2
Don't bother with the num_memspace check. It makes some otherwise-working
...
cards (e.g. Xircom CM33) fail needlessly.
From Jan van Doorn <jdoorn@nc.com>, PR #5580 .
1998-08-15 01:41:31 +00:00
582d4a7856
Should not use SCSI_POLL if the system is not cold.
1998-08-15 01:32:55 +00:00
9646d7f100
Add support for the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>,
...
PR #5691 .
1998-08-15 01:20:05 +00:00
7ea79f1cb2
Regen.
1998-08-15 01:18:06 +00:00
be8a202a21
Add the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>, PR #5691 .
1998-08-15 01:17:51 +00:00
b3b533c44d
Keep track if the disk has had done i/o, making it dirty. On last close,
...
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing. Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
c291189ae9
Have to fix the `(int)curproc' lossage now; kernel builds die here on alpha.
...
BTW, KNF requires the additional, not-technically-need `!= NULL'.
1998-08-15 00:04:00 +00:00
1f4b4ceda6
Add support for the NewMedia BASICS Ethernet. Device info provided by
...
Stefan Grefen in PR #5902 .
1998-08-14 23:31:22 +00:00
5fa0fd5087
Regen.
1998-08-14 22:59:54 +00:00
924090ec6d
Add vendor ID for NewMedia Corporation, and product ID for NewMedia
...
BASICS Ethernet. From Stefan Grefen, PR 5902.
1998-08-14 22:59:35 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a8d0a43ffa
2 changes to pciide_probe_wdc() (used in compatibility mode to check
...
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
a5f4270a21
Print program name when entering the debugger
1998-08-14 19:57:01 +00:00
a124d362a5
Minor code cleanups, KNF a couple of bits that got missed and remove
...
register keywords.
1998-08-14 18:04:04 +00:00
d5df55112a
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-14 16:50:00 +00:00
97e83f6e0b
Change the "vm_offset_t"s to "u_long"s for now; eventually, we can make
...
them vaddr_t and paddr_t, as appropriate (after scouring the RPB docs
to know which are phys and virt addresses).
1998-08-14 16:46:09 +00:00
308117258b
Add filecorefs so we get the header files installed.
1998-08-14 13:05:37 +00:00
e3e7e1673f
Fix the NEXT_IA_WITH_SAME_ADDR macro introduced in 1.27: it was finding
...
the first in_ifaddr structure with a different internet address! Reverse
the sense of the test. Spotted by and fix from Eric Haszlakiewicz.
1998-08-14 06:57:54 +00:00
170eadd04c
Add FILECORE filesystem.
1998-08-14 03:56:21 +00:00
0641969cd0
Added a vnode type for filecore fs (VT_FILECORE).
1998-08-14 03:31:16 +00:00
10198359c6
Define filecore mount and filecore node memory types.
1998-08-14 03:29:49 +00:00
922fa73143
Define the filecore filesystem MOUNT_FILECORE.
1998-08-14 03:28:56 +00:00
69244872a4
deffs FILECORE
...
Added filecorefs files.
1998-08-14 03:27:51 +00:00
faf4eed3e3
Initial commit of Andrew McMurry's Acorn Filecore filesystem.
...
This is a read only implementation of the filecore filesystem found
on Acorn RiscPC machines (arm32).
1998-08-14 03:26:12 +00:00
4283228f33
Make message less confusing
1998-08-14 02:20:07 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
ae8bdb1e72
Make sure CIMDIS is set and FLINK is clear in the PCR.
1998-08-14 00:23:26 +00:00
f41c00629b
Garbage-collect vm_offset_t and vm_size_t.
1998-08-13 21:36:27 +00:00
330d142f16
vm_offset_t -> {vaddr_t,paddr_t}, vm_size_t -> vsize_t
1998-08-13 21:36:02 +00:00
aedf80a6e9
Oops, lots of missed vm_offset_t -> vaddr_t changes.
1998-08-13 21:20:47 +00:00
057d49dba3
Second arg of vm_map_insert() is/was a vm_object_t.
1998-08-13 21:12:15 +00:00
09efdbb42d
Oops, this got missed in the vm_offset_t -> vaddr_t change.
1998-08-13 19:15:33 +00:00
e829016cba
Keep d_ncylinders correct
1998-08-13 18:18:54 +00:00
48bf26949f
Report "true" disk geometry; like sd disks do
1998-08-13 18:16:53 +00:00
d0153a96fe
The sense of the pccons_is_console test is backwards
1998-08-13 18:00:05 +00:00
0430a2cf75
Include db_dbgregs.s for ddb
1998-08-13 17:55:41 +00:00
1ae4d7da86
Allow inb/outb and friends to be called from debugger.
...
Crude access to x86 hdw "debug" registers.
1998-08-13 17:54:15 +00:00
67390e1ee2
Make serial line debugging easier to enable and use
1998-08-13 17:41:10 +00:00
9b25897ec0
minor consistency nit: the page index into an anon object is always
...
assigned to from integer types, and it is compared to integers. So
let it be an integer instead of vsize_t.
1998-08-13 17:32:46 +00:00
523a2c670a
Make sure to turn off timeout flag when doing untimeout().
1998-08-13 15:50:57 +00:00
33a864ee58
Fix typo.
1998-08-13 15:15:28 +00:00
55491ea367
Rototill match algorithim. New scheme:
...
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
standard ISA com port ranges?
3. Is the device in our table?
New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
a461703d7f
Use PCMCIA_FUNCTION definitions.
...
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
5417a1681d
Add PCMCIA_FUNCTION_* macros, for function types defined by
...
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
18b4602fd5
Add a comment regarding the broken behavior of the DAFB v7.
1998-08-13 13:45:33 +00:00
dd1665ce4b
Fix typo in SYSEX code.
1998-08-13 12:40:20 +00:00
5350df2953
Per POSIX, fail with EINVAL if advisory locking is attempted on a file type
...
that doesn't support it, rather than using a homegrown EBADF or EOPNOTSUPP.
1998-08-13 10:06:31 +00:00
bf1863d17b
Add genfs_einval(), which does the obvious thing.
1998-08-13 09:59:52 +00:00
7165d3f691
change the value of audio_prinfo.seek from u_long to u_int before it causes
...
too much damange. everything else here is the same in a 64bit vs. 32bit
world, so keep it all simple. the alpha was the only port to have any real
affect for this, and it only very recently begun to support some audio
devices so it doesn't really apply here. 1.3/alpha did not support audio..
1998-08-13 06:28:41 +00:00
0acc329dad
Remove ``#define ovbcopy bcopy''. This exists in sys/systm.h now.
1998-08-13 06:21:38 +00:00
a750861e5d
Mask interrupt by hardware register if possible.
1998-08-13 06:18:27 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
c987d23146
Remove some leftover fluff.
...
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
331bfdf5a0
Fix byte order bug I accidentally introduced.
1998-08-13 00:08:53 +00:00
798cb235bc
Oops, I forgot aliases for some old names (10baseT/UTP, 10base2/BNC,
...
and 10base5/AUI).
1998-08-12 23:23:29 +00:00
94e489e277
If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
...
properly! Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.
If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.
Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
d95a6e9dec
Make a variable name reflect a register name.
1998-08-12 22:27:42 +00:00
d4a5a3d0ef
Run the shutdown hook w/ SCSI_AUTOCONF.
1998-08-12 22:15:57 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
b7dab0b3f7
Add SYSEX.
1998-08-12 21:33:43 +00:00
391ef355d5
Handle SYSEX messages.
1998-08-12 21:31:28 +00:00
651d704733
Lower buffer size.
1998-08-12 21:29:29 +00:00
981f0cd0d0
If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
...
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
a24f6f77bf
Ugh, don't print out "autonegotiation failed to complete" if it did.
...
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
3292aee22b
Separate special character handling from normal output so that they
...
are obeyed even during an escape sequence.
This is how the original VT100 behaves.
1998-08-12 20:09:47 +00:00
8e12b6c020
stricter parameter check for scrolling regions
...
(PR kern/5954 by Dave Huang <khym@bga.com>)
1998-08-12 20:04:12 +00:00
8b950c2a65
Get rid of AMIGA_UPTBASE.
...
Replace it by a variable, which is initialized in amiga_init.c.
This will make the kernel actually work even if we have lots of Zorro-III
(or DraCo direct bus) i/o space.
1998-08-12 19:46:12 +00:00
c587bae132
Nit: space -> tab conversion. No functional change.
1998-08-12 19:16:24 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
a5ace63ee2
Associate the preamp with the mic volume in the input class.
1998-08-12 19:09:55 +00:00
916c60de3e
Oops; fix typos.
1998-08-12 18:55:03 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
a2f1d5b822
Add a knob to enable/disable the mic preamp.
1998-08-12 18:47:43 +00:00
f903600948
Add audio at ess.
1998-08-12 18:32:18 +00:00
8415989ddf
Add the PC speaker MIDI attachment.
1998-08-12 18:17:55 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
50ab480a8c
Add a layer to handle emulation of MIDI for synthesizers.
...
It handles decoding of MIDI commands, voice allocation, and translation
it notes to frequencies.
1998-08-12 18:14:01 +00:00
27c5df27d1
Tidy up and rename some functions in the MIDI driver.
1998-08-12 18:11:53 +00:00
5bec554354
Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
...
some 3c905-TX?). Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
5a94869995
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:58:42 +00:00
3e40b6ff15
A simple, obvious optimization, now that the loop has been
...
removed from zshard(). Pointed out by Bill Studenmund.
1998-08-12 06:55:24 +00:00
7f2ca20fd9
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 06:52:56 +00:00
b2dc905572
The Performa/LC 58x have a Valkyrie, not the DAFB.
1998-08-12 06:50:37 +00:00
69c09f978c
Be ever so slightly more careful when determining where and what size
...
the frame buffer is.
1998-08-12 06:48:05 +00:00
3e2efa4365
Fix a prototype tyop spotted by Bill Studenmund: s/clnintr/clnlintr/
1998-08-12 06:46:57 +00:00
7d09ad09b4
New framework for handling processor interrupts, derived in part from
...
the hp300 port.
- Interrupts 3-6 use this immediately. Interrupt 7 is a special case,
and the VIA interrupts (1 and 2) will be addressed when that code is
rototilled.
- Modify the zs front end to register with the appropriate interrupt
controller: through the PSC on the AV Quadras, and direct to
interrupt 4 on the rest. Arrange to have the appropriate zsc_softc
supplied to us at interrupt time.
- Modify the direct ADB driver (and its PowerManager cousin) to call
intr_dispatch(), rather than zshard(). XXX This is a kludge, but at
least limits the brokenness to the ADB drivers, now.
As a side effect, this should fix PR 5590. Thanks to Bill Studenmund for
correctly determining the cause of the problem reported there.
1998-08-12 05:42:44 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
63526c1ff1
New and improved console framebuffer initialization and autoconfig. This
...
resolves a great many issues, including Performa 58x interrupt handling
and offset displays on some models.
Programs that depend on the old (pre-NetBSD 1.1) grf interface may break.
That's actually a separate issue uncovered by this code, not caused by it.
1998-08-12 02:36:36 +00:00
3ad4ac45f9
Reworked interrupt blocking and unblocking to improve interrupt latencies
...
during context switches.
1998-08-12 01:10:29 +00:00
b0b082ba68
Give the "ep" driver the "mii" attribute.
1998-08-12 00:45:37 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
8e7a73c40d
Oops, change previous to use the registered name found in the System V ABI,
...
draft edition as of April 29, 1998.
1998-08-11 21:11:51 +00:00
b3e5811a08
Patch from Takashi NAKAMURA <QZM00427@nifty.ne.jp> to support the
...
Contour 3-button mouse from the Contour Design Corp.
It looks like a Microspeed mouse.
1998-08-11 20:07:59 +00:00
f3dd6e430b
Pull in files.mii
1998-08-11 18:52:52 +00:00
2c639fb882
Cache and microsecond clock resolution on KA46.
1998-08-11 17:52:57 +00:00
cffd2f29ae
Add machine identifier for the PA.
1998-08-11 17:01:41 +00:00
557c338959
Add CCITT & NATM interrupt handlers. (Jonathan Stone).
1998-08-11 12:22:57 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
6617ede128
KERNEL_RELOC -> RELOC_KERNEL (Entropy)
1998-08-11 07:05:46 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
396881cc5d
Eliminate a potential (but not common) NULL dereference.
1998-08-11 05:47:43 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
9b46e98b21
Adapt to attribute name change. Also, deal with 3Com PHYs that report
...
0/0 as their oui/model IDs.
1998-08-11 00:41:44 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
d812ed6db7
G/c the 83840 register definitions.
1998-08-11 00:12:20 +00:00
1301693108
Adapt to new MII code.
1998-08-11 00:11:39 +00:00
b1fb3ecb0f
Adapt to the new MII code. This required splitting some structures into
...
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
1998-08-11 00:09:26 +00:00
36db6106a8
Adapt "tl" driver to the new MII code, and add the "mii" attribute to
...
the "fxp" driver.
1998-08-11 00:08:23 +00:00
7779e1dfaa
miibus -> mii, and give it a locator "phy".
1998-08-11 00:06:12 +00:00
f0d19c2ee1
Change the name of the attribute to "mii".
1998-08-11 00:05:36 +00:00
e7643533b6
Adapt to MII layer changes.
1998-08-11 00:03:12 +00:00
e8e237ffc6
Device driver for the Quality Semiconductor QS6612 PHY, found in
...
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
6bae1a0bea
Device driver for the Intel i82555 PHY.
1998-08-11 00:00:28 +00:00
045a100420
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
1998-08-10 23:59:58 +00:00
f66f3b1ba9
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
1998-08-10 23:58:39 +00:00
ad00a98756
Initial generation.
1998-08-10 23:56:19 +00:00
3f8be46d4d
Near complete rewrite of the MII layer to present an interface compatible
...
with BSDI's MII layer to device drivers.
1998-08-10 23:55:16 +00:00
8fd79afcf8
Add machine identifier for ARM. Add (commented out) real ident
...
for Alpha as well.
1998-08-10 22:20:18 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
f8dd65f3f5
Fix ommision in last backout.
1998-08-10 20:23:50 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
c81476c89d
ISDN Blaster / Master: ZBus attachment / SUPIO driver.
1998-08-10 18:53:31 +00:00
e5439fc15b
Back out last change --- it doesn't work this way
1998-08-10 18:43:06 +00:00
345530343a
Responding to an issue brought to my attention- when the device is
...
opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).
So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.
This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.
The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
1998-08-10 16:56:25 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
0a1a20bd29
Recognise STRH, STRSH and STRSB instructions as store instructions when
...
determining page protections for [u]vm_fault(). Fixes bug spotted by
Richard Earnshaw.
1998-08-10 15:15:49 +00:00
9f13823e62
Support for VS4000/60. Some needs-count -> needs-flag.
1998-08-10 14:48:53 +00:00
c355f4a0ed
Support for VS4000/60.
1998-08-10 14:47:16 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
972b94efc4
Basic support for VS4000/60.
1998-08-10 14:31:07 +00:00
920e7c7d5d
Fix a race involving determination of pollmode. This is not known to be
...
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
574106c52b
create miscfs/genfs/genfs_vnops.c:genfs_enoioctl and make all the other
...
filesystems use it instead of a private version.
1998-08-10 08:11:10 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
86fe068843
Add ess at isapnp.
1998-08-10 01:54:59 +00:00
1c6dea16fa
For consistency, only do the rate coupling in full-duplex mode.
1998-08-10 01:27:34 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
20ec08b84e
Oops.
1998-08-10 01:17:33 +00:00
10148394d2
Call set_params if usemode changes.
1998-08-10 01:13:20 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
ca7ad3aff1
make this compile in a not SUN4M world.
1998-08-09 23:37:12 +00:00
2c8717021d
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 22:36:37 +00:00
878203d616
Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3".
1998-08-09 22:25:18 +00:00
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
98f1a01dec
Actually probe the hardware.
...
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
e6886047c9
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 21:58:52 +00:00
592b1dd587
But seriously...
1998-08-09 21:41:45 +00:00
a85ed63924
Oops; the previous was wrong on little-endian machines.
1998-08-09 21:35:03 +00:00
4522c799a1
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:51:08 +00:00
e1601dc2ca
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:36:58 +00:00
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
27ca6798df
bzero->memset, bcopy->memcpy, bcmp->memcmp
1998-08-09 20:15:38 +00:00
8cbcfa0df2
Add mulaw_to_slinear16 and alaw_to_slinear16.
1998-08-09 19:22:15 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
64e4a1fa7d
Support video interrupt for GrandVimage 17iL video card.
1998-08-09 18:19:09 +00:00
e9ef31ed72
msdosfs -> adosfs
1998-08-09 17:54:50 +00:00
b872f9b8e7
avoid lint error.
1998-08-09 12:47:27 +00:00
4a75265273
defopt PFIL_HOOKS.
1998-08-09 08:58:18 +00:00
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
5d236ade07
minr KNF nit ..
1998-08-09 03:16:23 +00:00
fe3c14b64d
use __sparc__ not sparc
1998-08-09 03:12:39 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
093a8daf6b
Go to splhigh in the debugger.
1998-08-09 00:00:57 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
d5eb56b2c2
Move splclock and splaudio outside splimp.
1998-08-08 23:39:38 +00:00
f996a2e194
Define IFM_INST_MAX, the largest possible "instance" value.
1998-08-08 22:12:30 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
09502c9fb2
Fix -Werror compilation failure due to lack of a couple of 'const's.
1998-08-08 20:57:55 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
eeh