015345c74b
Don't need INET or NS includes here.
2001-06-12 22:32:51 +00:00
9988acd41e
Don't need INET or NS includes here.
2001-06-12 22:28:15 +00:00
e103dbb4b0
Don't need NS-related headers here.
2001-06-12 22:05:53 +00:00
18e8d752f6
No need to pull in INET or NS headers -- that's all done by ether_ioctl() now.
2001-06-12 20:53:39 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
cb6b68a931
Mention where I got the information for writing the driver.
2001-06-12 11:52:03 +00:00
f6f3c9b35f
Add a hefty comment about the stray IR bug, so I don't forget it.
2001-06-12 11:49:18 +00:00
b50f28c38a
underrun, not underun
2001-06-12 11:48:51 +00:00
1f4eee4c21
In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
...
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
33afab3251
Add a short-circuit return from wdcprobe for IDE controllers without pullup
...
resistors, which return the last value written to the bus on a read. This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
fb2f3ce7e5
Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:13:49 +00:00
ec5280c1ed
Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:12:29 +00:00
274629aa08
Added support for the VME `sc' SCSI board. Compiles,
...
but needs testers as the author doesn't actually have
the hardware.
2001-06-11 15:09:54 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
a4401a8e5d
Regen from "pcidevs".
2001-06-11 06:36:51 +00:00
6caf1041cb
Add support for the D-Link DFE-530TX+. Patch supplied by
...
Gabriel Rosenkoetter in PR kern/13161.
2001-06-11 06:36:23 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
0a3b1c29a1
transceiver, not transciever.
2001-06-11 01:19:53 +00:00
6fee8596c7
Packet includes CRC, so mark it in the mbuf header. Fixes the
...
"discarding oversize frame (len=1518)" problem.
2001-06-10 21:53:08 +00:00
01c6253206
Only use b_proc if B_PHYS is set.
2001-06-10 18:41:27 +00:00
d29b7bb88c
Regen from "usbdevs".
2001-06-10 13:10:46 +00:00
8a6a34f18e
Add Philips PCA646VC PC Camera.
2001-06-10 13:10:25 +00:00
5a051092e4
Rename ofb_softc to ofbus_softc. (XXX Is this good name?)
2001-06-10 11:36:03 +00:00
bfac43a1c8
Centralise the geometry fudge.
2001-06-10 10:48:42 +00:00
5f1286dfb9
Don't make assumptions about the contents of the system drive table.
2001-06-10 10:34:44 +00:00
737763fde7
Forgot to commit this as part of the mvme68k evcnt(9) changes.
2001-06-10 08:27:42 +00:00
acf06d2e27
If the adapter is returning a selection timeout, then we should be
...
returning XS_SELTIMEOUT, not XS_TIMEOUT. Pointed out by Andrew Doran.
2001-06-09 18:08:20 +00:00
8c948a0386
Patches from takashi.yamamoto@bigfoot.com in kern/13139.
...
- Set XS_TIMEOUT on a selection timeout condition.
- Do not bother to call AscStartChip() in AscResetChipAndScsiBus()--
just clear the chip status.
- Make sure address is word-aligned in AscWriteLramByte().
Tested on my adv (AdvanSys ABP-9xxUA) with CRW8424S and UMAX SuperVista S-12.
Earlier versions of the system would get stuck trying to recover from error
conditions when the CD-RW drive was in heavy use. I have not seen that
behavior with these small patches.
2001-06-09 17:18:21 +00:00
810a0b00f4
dtide is MI now.
2001-06-09 13:51:49 +00:00
14f1650c62
Remove unused members from SCSI command block structure.
2001-06-09 13:43:02 +00:00
9cd36c6539
Fix an uninitialized variable in #ifdef DIAGNOSTIC.
...
Pointed out by soda.
2001-06-09 12:59:50 +00:00
e609865bbc
Correct reference to dtide.c, and don't bother with the "channel" locator to
...
dtide, since ata provides that anyway.
2001-06-08 22:33:59 +00:00
ca2047f7c6
Adapt the dtide driver to the MI podulebus framework, and move it to its new
...
home. It still doesn't actually work, but that's a SMOP.
2001-06-08 20:13:24 +00:00
837afd713e
Regen
2001-06-08 20:09:07 +00:00
e918a481e5
Move D.T. Software to their rightful place in the list, and correct the product
...
ID for their IDE interface. I've no idea where 0x00ae came from.
2001-06-08 20:08:35 +00:00
054673b07c
#endif /* takes no argument */
2001-06-08 12:51:17 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
e5bd00e48d
For ports that wire up pciide in compatibility mode, have
...
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
ef047f21f8
Add multiple inclusion protection. Define prototypes for openfirm
...
routines used in cdevsw.
2001-06-08 00:19:17 +00:00
59024512bd
LKM friendly: move ev_out32() to netbsd32 specific code; add an ev_out32 hook.
2001-06-07 17:52:52 +00:00
7a3a78cfa3
Compile on sandpoint.
2001-06-07 16:48:09 +00:00
df4739c8cb
Set TI_OPMODE_1_DMA_ACTIVE only if hardware assisted checksum isn't used
...
(FreeBSD does it this way). My Tigon II works with hardware assisted checksum
now.
2001-06-07 14:35:58 +00:00
85fb541842
Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when
...
reporting interrupt errors.
2001-06-07 10:55:15 +00:00
72510eee6d
Make the WDC_{ATA|ATAPI}_NOSTREAM flags settable through configuration
...
options. Needed on the Atari Milan.
2001-06-07 06:33:48 +00:00
ff5871412e
Correct the receive mode mask in the RXCMD register.
2001-06-07 05:19:26 +00:00
025decbccb
Don't clear a callout on a scsipi_xfer that has been scsipi_done()'d.
2001-06-07 03:44:00 +00:00
26603afde8
Update URL to documentation PDF.
2001-06-06 22:11:42 +00:00
03e1c3aa16
implement HPCFB_SWAP_BYTE.
2001-06-05 17:29:12 +00:00
b596bfa2d0
add vc_reverse flag to struct video_chip.
2001-06-05 15:02:40 +00:00
a4221d6b08
change behavior of cmap_work_alloc().
2001-06-05 15:02:12 +00:00
15f8692183
Make some functions __inline.
2001-06-05 12:42:44 +00:00
8ee014b439
Handle the DL10022 case.
2001-06-05 02:31:16 +00:00
c619444a71
Use the DL10019 media routines on the DL10019 and DL10022 (a change
...
I forgot to commit long ago).
2001-06-05 02:27:02 +00:00
cae5d5a796
Lock the kernel lock at interrupt enter.
2001-06-04 21:31:28 +00:00
46762d3560
fix lint exposed by GCC 3.0 20010604 (prerelease).
2001-06-04 20:56:51 +00:00
859a6a49b2
ANSI KNF.
2001-06-04 18:59:31 +00:00
07677cc805
Use back the 'u'&037 form - since it's CTRL-u, it's more readable that way
...
Use \007 instead of symbolic constant, since that's what is more often used.
Pointed out by Robert Elz.
2001-06-04 09:45:03 +00:00
147c9186b5
Remove overly paranoid test (and not in the spec either). From OpenBSD.
2001-06-04 06:01:40 +00:00
d7079b251e
Regen.
2001-06-04 06:00:43 +00:00
db2a5598b4
Add the Logitech iFeel mouse.
...
(Now that's a weird device, perhaps I'll write a driver for the vibration
feedback.)
2001-06-04 06:00:20 +00:00
13aba87bcb
Don't pass nonpositive repeat count to CSR_*_MULTI_2.
...
Should fix kern/13092.
2001-06-04 03:34:47 +00:00
4cfd2cf1d0
s/printf/DPRINTF/ for kern/13101.
2001-06-03 23:52:51 +00:00
dccf11ae11
cngetsn(): cosmetic only - use '\025' instead 'u'&037, and '\b' instead '\007'
2001-06-03 17:56:10 +00:00
056e20f2cc
Need to get the kernel lock when entering by interrupts.
2001-06-03 15:15:02 +00:00
461a7daf74
fix comment
2001-06-03 14:29:42 +00:00
bcdd082840
Add a driver for the Initio INIC-940/950 PCI SCSI controllers.
...
Based on OpenBSD's iha driver, and modified some structures by me.
Tested on arc, i386 and macppc.
2001-06-03 13:43:45 +00:00
4e7cb03446
Differentiate between a DL10019 and a DL10022 (they have slight
...
MII differences).
2001-06-03 04:52:28 +00:00
37368cb858
Use the correct bitbang ops on the DL10022 (oops!).
2001-06-03 04:39:52 +00:00
cc3002d53b
Clarify a historical comment.
2001-06-03 03:55:10 +00:00
f75e45c854
In ti_init2(), use a simpler, more obvious, and correct MTU
...
calculation to give the firmware.
2001-06-03 03:46:43 +00:00
f2b9a1f3cc
Replace a bunch of home-grown Ethernet related constants with
...
ones defined in <net/if_ether.h>
2001-06-03 03:29:44 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
947699688a
Create hcscreg.h, and put a couple of magic numbers in there.
2001-06-02 20:13:50 +00:00
ca4d373730
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:06 +00:00
9590a56496
Use bus_space_{read,write}_multi_stream_2 where available.
2001-06-02 15:49:16 +00:00
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
f4afeda420
Reduce the delay when polling so that dumps go faster.
2001-05-31 11:31:43 +00:00
4d3b32a658
Cosmetic change.
2001-05-31 08:33:40 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
thorpej