imp
c633f47bfd
Regen.
2001-06-20 05:46:24 +00:00
imp
34fe57df0e
Add O2Micro PCI-{CardBus,PCMCIA} bridges:
...
OZ6729, OZ6730, OZ6832/OZ6833, OZ6860 and OZ6812/OZ6872
2001-06-20 05:44:33 +00:00
ichiro
f4e59879ce
support Raltek 8139-based Cardbus card
...
reported by Takayoshi Kochi(t-kouchi@mvf.biglobe.ne.jp )
kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:41:27 +00:00
ichiro
f03f25cb17
regen
2001-06-20 05:39:36 +00:00
ichiro
ba3eaf4273
add product RealTek 8139
...
by kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:39:17 +00:00
oster
76d322c58c
#if out a few more bits that arn't required if we are not doing
...
PQ or RAID6.
2001-06-20 03:09:23 +00:00
uwe
35e011d31b
Convert to use cnmagic(9). Unifdef DDB and DDB_BREAK_CHAR.
...
While I'm here, s/ungetc/readahead/ in com_common_* because that's
what it _really_ is, "ungetc" is a very confusing name.
2001-06-20 03:07:25 +00:00
thorpej
0b0010a7c3
When probing for a PHY, look at the EXTSTAT bit in the BMSR, as well,
...
not just the media mask. This prevents PHYs/TBIs that only support
Gigabit media from slipping through the cracks.
2001-06-20 01:42:41 +00:00
thorpej
7e843c3ccb
Device driver for the Sundance Tech. ST-201 10/100 Ethernet. This
...
chip is found on the D-Link DFE-550TX.
2001-06-19 23:00:47 +00:00
thorpej
7914a89b02
Add support for the Seeq 80225 10/100 Ethernet PHY. This is just
...
a stripped-down version of the 80220/80223.
2001-06-19 20:10:54 +00:00
thorpej
93169d8a94
Regen; added Seeq 80225 10/100 PHY.
2001-06-19 19:51:27 +00:00
thorpej
5d3c31d576
Add Seeq 80225 10/100 PHY.
2001-06-19 19:51:04 +00:00
wiz
ac951736bc
`response', not `responce'
2001-06-19 13:45:52 +00:00
wiz
3f9984fc90
`existent', not `existant'
2001-06-19 13:42:07 +00:00
wiz
f3f6c5b675
`accessible' only has one `a'.
2001-06-19 12:52:20 +00:00
fvdl
dd270d4a3f
ifdef NISAPNP -> if NISAPNP > 0
2001-06-19 12:45:23 +00:00
lukem
b7f8c7eb86
delint
2001-06-19 10:43:26 +00:00
simonb
a8068ab82d
Don't use argument names in function declarations.
2001-06-19 08:24:07 +00:00
jdolecek
a7d6a8f2f1
The ifa is needed for CCITT&&LLC case, provide it in that case
2001-06-19 07:19:35 +00:00
oster
0e8f8213af
A bunch of these bits are only needed for the EVENODD stuff.
...
Shaves a little better than 1K off the size of an i386 kernel.
2001-06-19 03:25:16 +00:00
thorpej
62224968e1
Add support for the Adaptec AIC-6915 10/100 Ethernet. This is
...
a 64-bit PCI chip, available in 1, 2, and 4 port models.
2001-06-18 22:05:35 +00:00
onoe
319ea4a342
make it compilable: delete unused variable 'ifa' from lance_ioctl()
2001-06-18 13:47:18 +00:00
onoe
c07d2e1e96
Add Cisco/Aironet 350
...
Reported by Wolfgang Rupprecht <wolfgang@wsrcc.com>.
This doesn't fix PR 13181, which says the card doesn't work well.
2001-06-18 13:21:24 +00:00
onoe
e523b2f091
regen: Add Cisco/Aironet 350
2001-06-18 13:19:07 +00:00
onoe
61285ac2da
Add Cisco/Aironet 350
2001-06-18 13:18:08 +00:00
jdolecek
e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
bouyer
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
bouyer
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
simonb
1506d21315
Make error checking/reporting a little more correct.
2001-06-18 01:58:08 +00:00
tsubai
de98ab5b38
Regen.
2001-06-17 19:51:27 +00:00
tsubai
b63b6d01e6
Add device IDs on the new iBook.
2001-06-17 19:50:33 +00:00
jdolecek
adaaf11f9f
make pckbc_slot_names[], pckbc_portcmd const
2001-06-17 16:15:41 +00:00
thorpej
4c49d6fa2a
Split the Tx and Rx interrupt routines into separate functions,
...
and add some (optional) event counters.
2001-06-15 22:16:00 +00:00
nathanw
f71391cb6c
Move the check for successful attachment to earlier in the detach
...
routine, to avoid referencing nonexistent data structures.
2001-06-15 18:05:36 +00:00
bjh21
ddc6e8e6ad
I've got an 8-bit Ether3, so I've discovered that the address mapping is
...
non-linear. Comment it here so I don't forget.
2001-06-15 00:28:01 +00:00
mjacob
60a0137d9c
Ooops- we need to allocate an array of pointers to scsipi_xfer structures
...
isp_maxcmds in length- not an array of scsipi_xfer structures isp_maxcmds
in length.
2001-06-14 19:54:07 +00:00
itojun
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
oster
669f5cc5a5
It's silly to need a parity rebuild after a reconstruction has completed.
...
If we've just reconstructed a disk, then the parity is known to
be correct. (XXX doesn't hold for RAID 6!)
2001-06-14 02:35:56 +00:00
thorpej
3078a3d26d
It's pretty questionable to printf a PCI tag, but if we're going to
...
do so, at least make the printf compile across the board.
2001-06-14 01:06:56 +00:00
uch
a9d7b546d6
make this work.
2001-06-13 19:02:13 +00:00
bjh21
bb5ca33de4
Add a driver for the HCCS IDE interface I got at Wakefield. Like the D.T.
...
Software one (dtide), it doesn't generate interrupts, so we run it in polled
mode.
2001-06-13 18:31:43 +00:00
bjh21
18c4c9eab3
Update to use the new support for IRQ-less IDE controllers.
...
Also generally re-work to do channel attachment in a loop, since that saves on
code size.
2001-06-13 18:29:40 +00:00
bjh21
6acf237023
Use the new generic mechanism for forcing polling on a SCSI interface, rather
...
than doing it ourselves.
2001-06-13 18:27:27 +00:00
bjh21
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
toddpw
a865af9ad5
Enable attachment for Kingston KNE-PC2 Ethernet.
2001-06-13 13:41:01 +00:00
wiz
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
scw
e13606c37b
Workaround for buggy OPTi pciide chipset revisions, as reported
...
in PR/11644.
2001-06-13 09:55:25 +00:00
lukem
d9db68b3fe
be more specific about which interlan controller the qbus/if_il supports
2001-06-13 06:40:19 +00:00
simonb
6c4e6292a5
Regen; add IBM 405GP PCI Bridge & ROB-in i960RP Microprocessor.
2001-06-13 06:04:25 +00:00
simonb
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00