7a3fa51b7f
Garbage-collect the DYNAMIC_CRC_TABLE stuff. The table it computed
...
was incompatible with the new CRC code, and it is largely unnecessary
now, since the static table is so much smaller.
Fixes PR kern/20935.
2003-03-29 22:25:25 +00:00
8b0843a5b2
There is no point in initializing "rootpath" to "/".
...
Move it into BSS.
2003-03-27 12:28:58 +00:00
d8c7d22134
*** empty log message ***
2003-03-25 22:52:48 +00:00
8320edced9
Remove a whole bunch of crap -- including the entirely adler32 stuff that's
...
only used in gzip headers/footers -- that's not actually used here. Also use
a smaller CRC table. Saves >4k of code in boot images.
2003-03-25 22:48:43 +00:00
c6052ec21f
const! const!
2003-03-25 22:35:36 +00:00
f81c1c504b
remove stuff just moved to bootparam.c and some variables which are
...
never used.
2003-03-19 17:19:32 +00:00
3906113e15
Move global variables which are used only by bootparam here.
...
("domainname" is useless and could be removed, but adding code to
skip this in the RPC reply would probably be more expensive than leaving
it as a dummy variable.)
2003-03-19 17:18:07 +00:00
4d7fb7469d
Finish const poisoning.
2003-03-18 20:00:47 +00:00
bb478ade6c
Move more stuff into .rodata.
2003-03-18 19:33:51 +00:00
f6258762e1
Move some stuff into .rodata.
2003-03-18 19:20:09 +00:00
68edf0e576
separate ether_sprintf() from the rest of ethernet support -- sometimes
...
it makes sense to use the former w/o the latter (eg PXE)
2003-03-12 16:46:31 +00:00
7b3b2ea783
no need to include "netif.h" anymore
...
(shared interface stuff is in iodesc.h, included by net.h)
2003-03-12 14:51:31 +00:00
7816074c59
separate the netif interface from the rest of the networking code,
...
so that it can be replaced easily in md code
2003-03-12 14:49:19 +00:00
5649a49e43
After the "insert disk <number>, and press return..." message, check only
...
for the return keypress.
2003-03-11 19:43:04 +00:00
dd688f888f
translate EACCES (happens with NFS)
2003-03-11 15:02:54 +00:00
ef50700873
LIBSA_NO_CLOSE is LIBSA_NO_FS_CLOSE everywhere else.
2003-03-07 00:46:37 +00:00
cc005c66db
Switch back to generic bzero/memset until new one is shown to work.
2003-02-25 20:15:02 +00:00
e8d062d58b
Remove bogus check for bogus netmask.
2003-02-25 14:42:30 +00:00
d71686ab26
Introduce fdloadfile() to load an image from an open file descriptor;
...
implement loadfile() in terms of it.
This allows clients to open a file once and "load" it multiple times (e.g.
first with COUNT_KERNEL, then with LOAD_KERNEL) without the side-effects
of multiple open calls.
2003-02-24 10:51:05 +00:00
97d38cdec2
Actually use bzero.S. Also fix bzero to use GET_CPUINFO
2003-02-24 07:14:17 +00:00
05a4c83a70
Don't make memset.c since bzero.o has memset in addition to bzero.
2003-02-24 07:09:18 +00:00
6e4342ca79
Add support for LFSv2 filesystems. From a libsa standpoint, LFSv1 and
...
LFSv2 are treated as separate filesystem types for size considerations.
2003-02-23 23:17:42 +00:00
7d43baad24
Use the MAX() macro from <sys/param.h> instead of a local inline. Results
...
in same code size in ufs.c and removes an unused inline function in lfs.c.
2003-02-23 22:47:43 +00:00
8d6004faf3
We can't use <string.h> for standalone programs;
...
use <lib/libkern/libkern.h> for str*() prototypes instead.
2003-02-23 12:31:29 +00:00
2d1837c8fc
KNR, removing ugly 'unsigned' variables.
...
Probably should be size_t, but now matched prototype.
(mainly agreed with christos - he wanted size_t....)
2003-02-01 14:57:02 +00:00
912fab6ec9
Beautify a little
2003-02-01 14:54:22 +00:00
2c4edf02a4
Save some space
...
(agreed by christos)
2003-02-01 14:53:38 +00:00
3080e19ff3
Support limited filename globbing
...
- agreed by christos
2003-02-01 14:52:13 +00:00
a3ff3a3038
Bump daddr_t to 64 bits. Replace it with int32_t in all places where
...
it was used on-disk, so that on-disk formats remain the same.
Remove ufs_daddr_t and ufs_lbn_t for the time being.
2003-01-24 21:55:02 +00:00
8453828bf1
PR/19607: Bernd Ernesti: libsa does not have access to arpa/tftp.h. Put a
...
copy of it in our tftp.h
2003-01-12 18:59:15 +00:00
a64314e402
Fix broken build due too the move of the cd9660 and msdosfs kernel source code.
2002-12-30 16:41:53 +00:00
bd20047a69
Only display the final progress counter if any of the LOAD_ flags was given.
...
Fix comment describing the return value.
2002-12-11 09:55:20 +00:00
e8cc3884de
Rename __LDPGSZ to AOUT_LDPGSZ, to accurately reflect what it is.
2002-12-10 17:14:02 +00:00
4245ee1663
Wrap this file in "#ifndef _STANDALONE".
2002-12-05 17:12:06 +00:00
144469b350
Add strtoul.c
2002-11-25 00:55:22 +00:00
a186add0a8
If LIBKERN_ARCH is defined, use that as the architecture-specific
...
subdirectory. Needed for the x86_64 32bit compile case.
2002-11-23 23:35:50 +00:00
f86ab1a63e
Sync arm asm libkern files with libc's asm files.
2002-11-23 14:29:29 +00:00
6e73936f81
Use assembly version of bzero() and memset().
2002-11-20 09:52:53 +00:00
5d1c87f395
Assembly version of bzero()/memset().
...
Written by SHIMIZU Ryo.
2002-11-20 09:51:52 +00:00
766d863c42
memcpy() and memmove() must return the first parameter.
...
Problem found by itohy, fixed by SHIMIZU Ryo.
2002-11-20 09:50:37 +00:00
6576c49b48
Add an assembler version of strcmp, based on example code from the ARM
...
ARM. As an example of the performance difference that this provides
a Dhrystone score on my Shark goes from 213k to 261k.
2002-11-16 18:27:40 +00:00
7f74df5ef3
ABICALLS -> __ABICALLS__
2002-11-10 18:10:25 +00:00
efd79c70c9
Add lint infrastructure
2002-11-02 07:48:17 +00:00
6448ffbdfe
set LLIBS= so we don't try to check the lint lib against llib-lc.ln
2002-11-02 07:46:42 +00:00
cab484e445
move includes to the top so that this builds in libc context too.
2002-10-29 04:40:55 +00:00
c04f87a03e
remove setjmp/longjmp from libkern, they're not used.
2002-10-27 18:45:11 +00:00
c5a350ef59
use %g5 instead of %g7 (since we want to use %g7 for the cpu_info pointer
...
in the kernel). resync libc and libkern versions of this file.
2002-10-27 18:41:27 +00:00
07dca24022
make offsetof lint friendlier.
2002-10-24 20:53:50 +00:00
03c573236d
Replace the SuperH memcpy() with homebrewed code. The former seems to have
...
a subtle failure mode which can result in corruption of memory outside the
bounds of the destination buffer.
2002-10-22 12:25:18 +00:00
ac76a83a5c
Sync with libc/quad:
...
As discussed (briefly) on tech-userlevel, fix our quad support to work
correctly on LP64 platforms. This is mostly just s/long/int/ in the
appropriate places.
2002-10-20 10:17:14 +00:00
921743eed1
Fix a sign-extension botch for ILP32.
2002-10-19 08:54:23 +00:00
0e1af8ca62
Doh. Bail out early if we're passed a zero-length buffer.
2002-10-19 08:53:45 +00:00
99ad3a762b
Add native optimised assembler versions of some libkern routines.
...
The memcpy routine is courtesy of SuperH, with some tweaks by me.
XXX: There is room for further optimisation in some of these routines.
2002-10-17 11:53:32 +00:00
d32bd396f2
#undef ffs before the ffs() function definition, so that the name
...
isn't rewrote to __builtin_ffs() on gcc 2.95+; this fixes compilation
on sun2
also change the comment for function
2002-10-10 10:51:56 +00:00
aaccb8dc2b
need to include <sys/param.h> to get inline strlen() on vax; found
...
with help of Matt Thomas
2002-10-08 21:45:36 +00:00
a30355b57a
Add RCS ids.
2002-10-08 11:58:54 +00:00
73390e7e36
let this compile in the non KERNEL case without NRND.
2002-10-06 13:42:36 +00:00
0f95ec4fd5
ESP output was drawing down the entropy pool at a ferocious rate, a
...
particular problem on hosts with only wireless interfaces that are
definitely not safe to use as entropy sources.
Add arc4randbytes() which hands out bytes from the same source used
by arc4random(). This is intended to be a _temporary_ interface
until we can design and implement a better general PRNG interface
that is decoupled from the entropy-pool implementation.
Modify key_randomfill() (used only for initialization vectors on
SA creation and via key_sa_stir_iv(), which does not "stir",
despite its name) to use arc4randbytes() instead of pulling bits
directly from the entropy pool. It is my hope that this change
will pose minimal integration problems for the KAME folks as the
random-pool interface is *already* different between each BSD
variant; this just simplifies the NetBSD case and solves a
fairly serious problem.
Note that it is generally considered acceptable cryptographic
practice to use a fast stream cipher to generate IVs for encryption
with stronger block ciphers. For example, the use of "non-Approved"
PRNGs to generate IVs for "Approved" block ciphers is explicitly
sanctioned by FIPS 140-2.
2002-10-06 08:51:44 +00:00
cd114adca5
This commit includes two major changes:
...
1) Speed up arc4random(). We make arc4randbyte() inline, which makes this
not much slower than, say, the other arc4 implementation in our kernel.
We also replace four calls to arc4randbyte() with a loop, saving about
20% on some processors where the "unrolled" arc4randbyte() calls would
needlessly stomp the cache.
2) Address various problems with the initialization/"stirring" code,
primarily in the area of handling of the source data from the kernel
entropy pool. We used to:
a) Ask the entropy pool for 32 bytes
b) If we got zero bytes, key with junk from the stack (ouch!)
which has some nasty implications, to say the least. For
example, we're most likely to get zero bytes at boot time,
when the stack contents are even more predictable than usual.
c) If we got less than 32 bytes but more than zero bytes, use
however many bytes we got as the arc4 key, copying it
repeatedly as per usual arc4 key setup.
Because of the way NetBSD's entropy pool works, this was
mostly harmless, because if you ask for RND_EXTRACT_ANY,
you always get as many bytes as you ask for. However,
this is probably a security hole in the original FreeBSD
code, where AFAICT you might end up using an 8-bit arc4
key -- not good, much worse than using the output of the
entropy pool hash function even when it thinks it only
has 8 bits of entropy to give you.
One thing this code could do on NetBSD that was not so
good was to replace a key with a lot of entropy with
one with less entropy. That's clearly counterproductive.
The new code, instead:
a) Asks for 32 good bytes. If it gets them, use them as the
arc4 key in the usual way.
b) Tracks how many entropy bytes the key it's replacing had.
If the new entropy request got less bytes, leave the old
key in place. Note that the first time through, the "old
key" had zero bytes, so we'll always replace it.
c) If we get less then 32 bytes but more than we had, request
EXTRACT_ANY bytes from the entropy pool, padding the key
out to 32 bytes which we then use as the arc4 key in the
usual way.
This is still really all rather backwards. Instead of this generator
deciding to rekey itself using a basically arbitrary metric, it should
register a callback so that the entropy pool code could rekey it when
a lot of bits were available. Details at 11.
Finally, rename the "stir" function (which did not stir) to "rekey",
which is what it actually does.
2002-10-06 06:47:40 +00:00
2a1b344158
Unconditionally add strstr.c. Bill Studenmund.
2002-10-04 20:00:00 +00:00
26737526db
Add strstr() to libkern. For now, it's only used in i386 (for processor
...
identification).
2002-10-04 18:39:52 +00:00
df6ef6d0d3
include rnd.h only under kernel build.
...
caveat: arc4random() will not get stirred in bootstrap code.
2002-10-04 07:33:26 +00:00
dfea6e4344
add missing "rnd.h" include - noted by simonb
2002-10-04 02:37:23 +00:00
44bc4ef4a9
Ansify's (use prototypes).
2002-10-04 00:50:15 +00:00
42ca361622
Preserve and restore the caller's FP status register, and ensure
...
it contains a sane value while we're doing FP ops.
2002-09-28 10:33:59 +00:00
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
2841e1341c
add strtoul.c, it's now used in MI code.
2002-09-21 17:45:16 +00:00
77d3833330
Need strtoul() also.
2002-09-19 17:37:32 +00:00
2699791533
Do not #include "/usr/include/arpa/tftp.h" directly. Doing so is
...
VERY BAD for cross-compiling.
2002-09-16 16:53:45 +00:00
a991dcef11
Add __movstr_i4_{odd,even} for -m4.
...
Written by SHIMIZU Ryo.
2002-09-05 08:35:15 +00:00
f89823c1f8
Save 1-4 instructions on all cases except for the ret=0 case.
...
This is probably the last version from me. :)
You are welcome to speed it up, of course. :)
Here's a benchmark on SH-4 200MHz.
9.2% faster if all the cases occur evenly.
return value C version previous vers this version speed ratio
of ffs() (ns/call) *1 (ns/call) (ns/call) *2 (*1/*2)
------------ ------------ ------------- ------------ -----------
0 86 81 81 1.06
1 110 106 91 1.21
2 132 106 92 1.43
3 165 117 96 1.72
4 201 116 95 2.12
5 237 107 99 2.39
6 271 106 101 2.68
7 307 116 107 2.87
8 342 116 105 3.26
9 376 126 111 3.39
10 410 127 110 3.73
11 446 136 115 3.88
12 483 134 116 4.16
13 518 125 119 4.35
14 551 126 120 4.59
15 587 135 127 4.62
16 624 136 126 4.95
17 658 139 126 5.22
18 694 140 126 5.51
19 727 148 131 5.55
20 764 150 131 5.83
21 799 141 135 5.92
22 834 142 135 6.18
23 868 152 140 6.20
24 903 153 142 6.36
25 939 140 127 7.39
26 974 141 126 7.73
27 1009 152 131 7.70
28 1044 148 130 8.03
29 1080 141 136 7.94
30 1115 141 136 8.20
31 1151 151 141 8.16
32 1185 151 140 8.46
2002-09-01 13:14:53 +00:00
fa5465079f
Slightly improved version of ffs(3).
...
Partially from SHIMIZU Ryo <ryo@iij.ad.jp>. Thanks.
Some cases are slower, but other most cases are faster.
Here's a benchmark on SH-4 200MHz.
return value C version previous vers this version speed ratio
of ffs() (ns/call) *1 (ns/call) (ns/call) *2 (*1/*2)
------------ ------------ ------------- ------------ -----------
0 86 86 81 1.06
1 110 86 106 *(slower) 1.04
2 132 86 106 * 1.25
3 165 105 117 * 1.41
4 201 104 116 * 1.73
5 237 111 107 2.21
6 271 111 106 2.56
7 307 126 116 2.65
8 342 125 116 2.95
9 376 122 126 * 2.98
10 410 121 127 * 3.23
11 446 139 136 3.28
12 483 140 134 3.60
13 518 146 125 4.14
14 551 146 126 4.37
15 587 161 135 4.35
16 624 162 136 4.59
17 658 141 139 4.73
18 694 142 140 4.96
19 727 160 148 4.91
20 764 161 150 5.09
21 799 167 141 5.67
22 834 167 142 5.87
23 868 181 152 5.71
24 903 181 153 5.90
25 939 146 140 6.71
26 974 146 141 6.91
27 1009 166 152 6.64
28 1044 165 148 7.05
29 1080 171 141 7.66
30 1115 171 141 7.91
31 1151 185 151 7.62
32 1185 186 151 7.85
2002-08-28 15:34:35 +00:00
181f0a9b54
Tweak the previous change so that a prototype is always provided.
2002-08-25 21:09:45 +00:00
6736303e13
Use assembly version of ffs(3).
2002-08-24 06:39:48 +00:00
85ce1de27f
Oops, SYSLIBC_SCCS -> LIBC_SCCS
2002-08-24 06:37:24 +00:00
70b5675025
Assembly version of ffs(3).
...
Confirmed to return the same value as that of the C version.
The results of a simple benchmark on SH-4 200MHz, is shown below.
I think this shows acceptable performance.
return value C version this version speed
of ffs() (ns/call) (ns/call) ratio
------------ --------- ------------ -----
0 86 86 1.00
1 110 86 1.27
2 132 86 1.53
3 165 105 1.57
4 201 104 1.93
5 237 111 2.13
6 271 111 2.44
7 307 126 2.43
8 342 125 2.73
9 376 122 3.08
10 410 121 3.38
11 446 139 3.20
12 483 140 3.45
13 518 146 3.54
14 551 146 3.77
15 587 161 3.64
16 624 162 3.85
17 658 141 4.66
18 694 142 4.88
19 727 160 4.54
20 764 161 4.74
21 799 167 4.78
22 834 167 4.99
23 868 181 4.79
24 903 181 4.98
25 939 146 6.43
26 974 146 6.67
27 1009 166 6.07
28 1044 165 6.32
29 1080 171 6.31
30 1115 171 6.52
31 1151 185 6.22
32 1185 186 6.37
2002-08-24 06:30:34 +00:00
3f5fba68de
Do not try to use "__builtin_ffs" on vax, ffs is an instruction already.
...
Maybe possible to teach gcc to use it?
2002-08-23 08:45:27 +00:00
c0d823519c
GCC 2.95 supports __builtin_ffs(); use it.
2002-08-21 01:27:58 +00:00
dafc960ed6
Local label fixup.
2002-08-17 19:00:26 +00:00
d8ac0fb3aa
pull in ffs.S from libc for arm.
...
The main benefit is that ffs always runs in constant time.
2002-08-17 01:22:33 +00:00
b98931f62e
Use .L prefix for all local labels.
2002-08-15 18:30:36 +00:00
7c4618a9ce
cpu_info is not in spr0, but spr_g_0.
2002-07-30 06:10:46 +00:00
6789db7962
Avoid redundant memory access.
2002-07-10 06:02:09 +00:00
59474a8c82
NetBSD, meet the SH-5 cpu.
...
SH-5, meet NetBSD.
Let's hope this is the start of a long and fruitful relationship. :-)
This code, funded by Wasabi Systems, adds initial support for the
Hitachi SuperH(tm) SH-5 cpu architecture to NetBSD.
At the present time, NetBSD/evbsh5 only runs on a SH-5 core simulator
which has no simulated devices other than a simple console. However, it
is good enough to get to the "root device: " prompt.
Device driver support for Real SH-5 Hardware is in place, particularly for
supporting the up-coming Cayman evaluation board, and should be quite
easy to get running when the hardware is available.
There is no in-tree toolchain for this port at this time. Gcc-current has
rudimentary SH-5 support but it is known to be buggy. A working toolchain
was obtained from SuperH to facilitate this port. Gcc-current will be
fixed in due course.
The SH-5 architecture is fully 64-bit capable, although NetBSD/evbsh5 has
currently only been tested in 32-bit mode. It is bi-endian, via a boot-
time option and it also has an "SHcompact" mode in which it will execute
SH-[34] user-land instructions.
For more information on the SH-5, see www.superh.com. Suffice to say it
is *not* just another respin of the SH-[34].
2002-07-05 13:31:28 +00:00
3763adaefd
Avoid leaving junk in the top half of R0 on return.
...
This fixes port-arm/17440.
2002-07-01 19:07:18 +00:00
10d47b4dd3
Updated version of cscope/mkid support. Check libkern and compat lib
...
for source files. Also include header files in mkid run.
2002-06-18 23:46:52 +00:00
940fedda07
Fix make breakage. $ZDST != ${ZDST} in make. make clean/cleandir now works.
2002-06-15 19:30:56 +00:00
c3e57df04c
discard 256 bytes of output every time we stir (not just when initializing)
2002-06-14 03:05:46 +00:00
e978777b86
Added hppa support to libkern.
2002-06-06 20:03:37 +00:00
937b671271
use exit(int), not exit(void), consistently - even if the arg has no meaning.
2002-06-01 11:40:31 +00:00
c0e2bb0509
need libkern.h for bootloaders
2002-05-29 06:27:15 +00:00
a20462dc6e
Implement LIBSA_NO_FS_CLOSE, LIBSA_NO_FS_WRITE and LIBSA_NO_FS_SEEK.
...
LIBSA_NO_FS_SYMLINK and LIBSA_FS_SINGLECOMPONENT are irrelevant here.
2002-05-28 14:30:53 +00:00
43079a573b
KNF.
2002-05-28 14:26:01 +00:00
2e926ba699
no need for libkern.h
2002-05-28 12:21:22 +00:00
0ac289dea9
have arc4random(9).
2002-05-28 10:09:24 +00:00
e34d4e21de
fix comment
2002-05-10 11:07:01 +00:00
5457f78a34
Don't bother testing if a uint8_t is > 256 -- that test is always false.
2002-05-09 02:44:39 +00:00
67c33ffcda
Remove two shadowed variables, one of which was set to what it was
...
shadowing(!) and the other a temporary variable (as was it's shadow).
Code generated with "gcc -O2" is the same before and after.
2002-05-07 02:02:41 +00:00
9f680534b0
Add strtoul.
2002-05-05 11:23:24 +00:00
f98b9b43e8
Add strtoul.c
2002-04-24 16:56:36 +00:00
b0fa7eb2c1
Someone had a braino here; IP_TTL != IPDEFTTL. This caused the standalone
...
udp traffic to only have a ttl of 4.
Found by Jens Nilsson, jens@rockstorm.se .
2002-04-23 09:16:09 +00:00
22143f5a44
Add strtoul.c, otherwise kernels using "wi* at pcmcia?" do not work
...
anymore.
Why only four archs provide this is beyound me.
2002-04-16 06:36:02 +00:00
fd1c084a68
Add a 1byte pad to make the ustar_t word aligned so the uas_1cyl after it
...
will also be word aligned. This makes the VAX VMB bootrom happy since it
doesn't support odd-aligned buffers.
2002-03-30 01:29:48 +00:00
cb520da5b3
Refresh from libc.
2002-03-28 00:46:08 +00:00
58830d68c5
Added brand-new integer multiply and divide support, used only
...
on the m68000.
2002-03-26 22:49:32 +00:00
12810ed37d
Use size_t in prototype (so this will be LP64 clean for PPC64 someday).
...
Calculate len separately for icache & dcache in case each has different
cacheline widths. Make the code for both loops the same except for the
dcbst/icbi. Deal with sizes >=2GB properly (like that'll happen but ...)
2002-03-26 21:20:24 +00:00
d617871b0c
On the m68000, if and only if gcc doesn't seem to know
...
where libgcc.a is, fall back to one under DESTDIR.
2002-03-22 00:17:12 +00:00
6440db6488
* Add a NetBSD Vendor Class Identifier option as proposed on tech-net
...
in message <20020216172527.C23901@dr-evil.shagadelic.org>.
* Print the bootp/dhcp response, as is done for rarp/bootparam
responses.
* Nuke bootp_flags and BOOTP_PXE; they're not used, nor should they be.
2002-03-20 23:10:39 +00:00
f0658bdada
make compile with _STANDALONE
2002-03-18 05:10:58 +00:00
d16aceedcc
Protect remaining references to 'debug' with NETIF_DEBUG.
2002-03-17 05:46:37 +00:00
f28e18332c
Move files[] from globals.c to its own file. Including all of globals.o
...
breaks the size limit for at least the pmax bootblocks.
Fixes PR port-pmax/15924 from Gregory McGarry.
2002-03-15 13:23:34 +00:00
4c434f6210
Updated from libc.
2002-03-13 00:59:29 +00:00
104148a990
Sync with userland (1.1.4)
2002-03-12 00:42:23 +00:00
e2d6f22138
Add register prefixes to these.
2002-02-24 00:12:41 +00:00
6cad4b795d
Upon further reflection, move udiv/urem to libkern and out of vax/vax.
2002-02-24 00:08:19 +00:00
0b91bc440f
Move files[] from open.c to globals.c, so that it's possible to
...
use libsa in an application where there are no file systems or
devices.
2002-02-23 05:44:24 +00:00
da694bd77b
fix spelos
2002-02-22 12:46:53 +00:00
f2d946a56e
blkset() used a register for set value that get clobbered by movc5,
...
causing the set area to get unpredictable contents.
2002-02-19 21:46:17 +00:00
15bffcdeed
Add a comment describing what SA_USE_LOADFILE is for.
2002-02-17 23:22:22 +00:00
0d210931e3
Add a missing "static".
2002-02-17 23:19:00 +00:00
bf9a052aa4
Add EOFFSET.
2002-02-17 23:18:32 +00:00
e858ed8fa4
Not all ports use the `offset' in their calulations and on those platforms
...
compile errors are generated due to it. By explicitly using `offset=offset'
the variable is used in the compilers view and is optimised away anyway.
2002-02-11 20:25:56 +00:00
2362fef9a8
Add __blkcpy() and __blkset() (renamed/modified from __blkclr()) to
...
libkern.
2002-02-10 22:04:51 +00:00
e31435237d
sync
2002-01-24 00:45:22 +00:00
e71de3f668
R5900 short-loop bug.
2002-01-02 12:34:27 +00:00
23ed6be403
Always provide alloca() as __builtin_alloca().
2001-12-28 07:37:06 +00:00
1bac15cba5
we need ffs().
2001-12-27 00:10:39 +00:00
6870c1d462
don't use .abicalls in kernel.
2001-12-27 00:09:59 +00:00
e509d7712d
copy from libc/arch/mips/string
2001-12-27 00:08:19 +00:00
5ed948ecea
The kernel is now built with -ffreestanding, so GCC built-ins are
...
disabled. Explicitly re-enable some that we want to use, namely:
* memcpy() -> __builtin_memcpy()
* memcmp() -> __builtin_memcmp()
* memset() -> __builtin_memset()
* strcpy() -> __builtin_strcpy()
* strcmp() -> __builtin_strcmp()
* strlen() -> __builtin_strlen()
We might also consider some others for GCC 3.x.
2001-12-23 22:48:29 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
f14e78b4c3
Disable bzero/memset assembler implementation until the dependency
...
problem on assym.h is sorted out and TRW to get at CACHELINESIZE in
the kernel is determined.
2001-12-02 11:03:39 +00:00
8231ab74c5
Add assembler version of strlen.
2001-11-30 02:27:20 +00:00
625c08cf7e
Outifdef some stuff not needed in the _KERNEL case.
2001-11-30 02:25:50 +00:00
4ee3b0f097
Add assembler versions of ffs, bzero and memset.
2001-11-29 00:27:07 +00:00
2229499bfb
Don't make clean and cleandir depend on the lib subdir. Just check for it's
...
existance before running the submake. This makes it possible to run a
make build (which runs cleandir before make obj) in a r/o source tree
2001-11-21 22:10:54 +00:00
9cc0f33345
Tidy up some memory copying cruft:
...
bcopy.S is no longer needed
memmove and memcpy were both stacking r0 and unstacking it to keep the return value, so push this down into _memcpy.
rename _memcpy.S to memcpy.S.
memmove.S is now just a placeholder otherwise the make system automagically adds a memmove.c file to libkern.
memmove is just another entry point for memcpy.
2001-11-20 00:29:19 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
4446c00002
Undefine DESTDIR; we don't want the special DESTDIR <bsd.lib.mk>
...
handling for kernel libraries.
XXX this build method should be replaced by something more sane
2001-11-14 21:59:31 +00:00
4d1b8d545e
Sync to libc version of divsi3.S. This is to fix up the stack for 8 byte alignment.
2001-11-13 20:06:40 +00:00
c89e803d30
Remove USB copyrights. The coff and elf loading code did not come with BSD4.4.
2001-11-09 19:27:25 +00:00
f1defc3543
To avoid backwards seeks on sequential devices (eq. QIC tapes), read all
...
the program headers in one operation into an internal buffer.
2001-11-09 18:31:08 +00:00
0971f93345
Make the ELF loadfile routines byte-order independent when used in
...
a non-_STANDALONE environment (e.g. installboot(8)): internalize and
externalize the exec, program, and section headers as necessary.
Reviewed and OK'd by Christos.
2001-10-31 21:24:09 +00:00
a43b4351a8
Oops, committed wrong copy of file in previous revision.
2001-10-31 20:22:22 +00:00
90aee7593a
Add standalone 64-bit to/from {big,little}-endian routines.
2001-10-31 20:19:52 +00:00
e727e3f180
Split elf32 vs. elf64 handling in loadfile(), including support for
...
each separately and explicitly. BOOT_ELF is now BOOT_ELF32 and
BOOT_ELF64, and ELFSIZE should no longer be defined in loadfile_machdep.h.
2001-10-31 17:20:45 +00:00
4810d73020
Build the loadfile() a.out, ECOFF, and ELF back-ends as separate
...
objects.
2001-10-31 01:51:42 +00:00
91626c3515
Split the exec formats included by loadfile() into separate files.
...
Primary goal: explcitly select which ELF format (elf32 or elf64) to
support for a cross tool which uses loadfile().
2001-10-30 23:51:03 +00:00
74eebee33c
Add standalone byte-swapping routines that don't require testing
...
the system's byte-order:
- host to {big,little}-endian {16,32}
- {big,little}-endian {16,32} to host
These are not intended to be used in libsa directly, but are rather
intended to be used by host tools which may use libsa routines (such
as loadfile()) which need to use explicit byte-ordering.
2001-10-30 23:35:33 +00:00
thorpej