as pmax/dev/findcons.c:
* Follow the same logic: look for the device the PROM is using.
* If it's a framebuffer and we don't have a driver for it, try other
* framebuffers in PROM search order.
* If no match found, warn user and fall over to serial console.
* if no serial console found, go back to PROM.
Rework tc/scc.c attach routine to give cleaner initialization semantics.
Prune out old 'braindamage' code.
enough to use as a console on my DEC 3000/400 (connected to a VT-520
terminal).
XXX The MI SCC driver needs serious changes to handle platforms which
have muliple SCC attachments (e.g. the Alpha port, which has an ioasic
attachment for TurboChannel systems and a gbus attachment for TurboLaser
systems).
XXX The MI SCC driver also needs changes to deal with the wacky (to put
it mildly) way the chips are wired up on the ioasic (on both TC Alphas
and DECstations). These are going to come along later.
* Do rcons output properly, using cn_tab->cn_dev which points
at rcons cdevsw entrypoints.
* The pmadx console code was using keyboard (serial) device
(major,minor) for raster consoles with special code in the keyboard
drivers to catch output intended for consoles, pull it off the device
queue, and print them via cnputc().
Ifdef out RCONS_BRAINDAMAGE.
* Other minor cleanup to pmax scc driver.
version has 2GB direct map starting at 2GB, and either 256MB or 1GB
S/G starting at 1MB. I've done *some* testing on this, but I'm not
quite happy with it yet.
out how much s/g ram is available. Can't really use the 128K entry S/G
ram yet- but I'll fix that later. More importantly, add in a dwlpx_iointr
handler that will try and figure out what the DWLPX error is and at
least print out what is happening- I actually found it useful in S/G
entry debugging as it could tell me that I had some bad S/G entries.
certain 17" monitors. Change from Michael R. Zucca, PR 4988.
XXX - This can cause problems on system with the DAFB chip which currently
use only a NuBus-based video adapter. In particular, grf devices may not be
attached properly in this case. This unfortunate situation is less annoying
than not having a reasonable console, however. A reasonable, reliable
monitor sense algorithm for the DAFB would resolve the problem.
This should allow to use old X servers which depend on the old mouse
interface to work in the future.
XXX There can be only one attachment - either to an old console driver
or to the new pckbc driver - be configured.
-rename the "pckbd" internal attribute to pckbcport, it conflicts with the
real pckbd device in dev/pckbc
-add attachments of pccons and pms to the new mi keyboard controller
driver (more or less for testing)
-include the new "files.wscons" and "files.pckbc"
-add declarations for VGA - must be done here for now to avoid conflicts
with alpha's private VGA driver
- release the correct page (ppsp[lcv], not pg)
- don't access the page's fields after we have released it
- in the uvm_objct case: move on to the next page if we've released
[should have been merged in on 1998/02/12, but we somehow missed it]
-allow to bus_space_map() for the memory hole in early startup
-add calls to the new XXX_cnattach() functions to consinit()
-add a "pckbc_machdep_cnattach()" dispatch function to allow the
combination of old console driver - new keyboard controller driver
* Add more #ifdef pmax/#endif, #ifdef alpha/#endif where appropriate.
Config and heade files need more work (or replacement)
change TK_NOTYET to HAVE_RCONS
change commented-out /* && cn_tab.cn_screen */ to && raster_console()
* Add DDB hooks.
* Note where Alpha console ignores carrier on consoles.
* Add pmax-derived console tty-size code inside HAVE_RCONS
* Fold in gross pmax rcons-input hooks, inside HAVE_RCONS
Untested, but whitespace/ifdef only, cross-compiles OK,
preprocessing shows no significat differences (famous last words)
the TLB and I-cache in the SWITCH_CONTEXT macro.
- Right after switching to proc0's newly-created context at startup time,
flush the TLB and I-cache; this is the only place where it's not done
automatically.
- Fix a nasty bug in a critical section of cpu_switch(); change the
pmap_activate -> SWITCH_CONTEXT -> pmap_deactivate sequence to
pmap_deactivate -> pmap_activate -> SWITCH_CONTEXT. This prevents
erroneously marking a pmap inactive if switching to a process that
shares it's address space (and thus its pmap) with the oldproc! Noticed
by Chris Demetriou.
of TLB and I-cache flushes, significantly speeding up context switches.
Once again, many thanks to Chris Demetriou and Ross Harvey for code
review and debugging assistance!
to compile. I made the changes that seemed to make sense tracking the
shift from TS_WOPEN to tp->t_wopen- but they may be wrong. I wasn't
subscribed to tech-kern so I missed the discussion, and C. Hannum
was not particularly enlightening. Sorry if this isn't quite right.
- device attachment arguments contain bus-specific
address and interrupt levels.
- devices must call back on bus map functions to get their
addresses and interrupt levels translated properly.
- sun4m's obio bus is treated like an Sbus slot.
- the sun4-style obio bus has its own attach arguments
and map functions.
we were in ledcontrol(), the heartbeat twinkler would just punt on
updating the LED even though it had already updated the status. (This
was broken in v1.73 of locore.s).
Rather than resurrect the old code, simplify ledcontrol() and don't
bother with mutual exclusion. As mentioned by the comments describing
this function, we really don't need to be that precise. We do, however,
want to guarantee instructions that modify the status variable directly,
so the function is now primarily inline assembly.
null, the frstor would fault on a PPro. I'm pretty sure this is not
how the chip is supposed to behave, but it's easy enough to do a fninit
to throw away the exception state.
Also, some other minor changes to the documentation.
ID) when determining if the Vendor ID is invalid. The spec says that
Vendor ID of 0xffff is invalid, so, it doesn't _matter_ what the product
ID is in that case. Treat Vendor ID 0 as invalid because we always have.
RTO estimation changes. Under some circumstances it would return a value
of 0, while the old Van Jacobson RTO code would return a minimum of 3.
This would result in 12 retransmissions, each 1 second apart.
This takes care of those instances, and ensures that t_rttmin is
used everywhere as a lower bound.
the very rare case of shared mappings that have amap's attached in a
reasonable way -- this is not currently causing any problems, but i
fixed it anyway. update the comment in this section of code and also
be smarter about avoiding needless calls to pmap_protect().
change pfil_add_hook to put output filters at the tail of the queue,
while continuing to place input filters at the head of the queue. update
the two users of these functions, and document these changes.
fixes PR#4593.
invalidation algorithm:
if (old mapping had PG_ASM set || pmap is active) {
TIBS(va);
if (also sync I-stream)
imb();
}
The check for "old mapping had PG_ASM" will get all kernel mappings (since
kernel mappings always have PG_ASM set).
This allows us to remove the bogus check for the kernel pmap in
active_pmap() - do so.
Use the new TLB invalidation macro whenever such action is needed.
kleink