get APM debugging code compiled in. also, redo the way APM debugging
printfs are invoked, making sure they're always compiled in if debugging
is enabled, but printing them only if the appropriate bits in the
'apmdebug' global variable are set.
* clean up function prototypes (alphabetize in each category, get rid
of 'STATIC' and make them always static since kernels shouldn't have
static symbols stripped anyway, and debugging kernels definitely don't),
group global variables together and note that they're used as globals).
* Export the following as option-settable and patchable global variables:
apmdebug flags word that controls which APM debugging
printfs are printed, set with APMDEBUG_VALUE.
apm_enabled boolean that indicates whether or not APM should
ever be configured on the machine. true by
default, false if APM_DISABLE defined when
compiling. this option exists so that users
whose systems crash when APM is enabled can
disable it with a patchable kernel variable, and
therefore don't necessarily have to compile
a custom kernel as often. With this option set,
a check is still done to see if the APM BIOS
exists; this variable should be used to prevent
the kernel from ever attaching to the APM BIOS.
apm_force_64k_segments
boolean that tells segment setup code to always
use segments with 64k length. false by default,
true if APM_FORCE_64K_SEGMENTS defined when
compiling. used to just be a compile-time option.
apm_do_idle boolean that controls whether or not the APM code
will try to signal the BIOS that the system is
idle when in the idle loop. true by default,
false if APM_NO_IDLE defined when compiling.
apm_do_standby boolean that controls whether or not standby
requests are ever attempted. true by default,
false if APM_NO_STANDBY defined when compiling.
used to just be a compile-time option.
apm_v11_enabled boolean that controls whether or not the driver
attempts to use APM spec v1.1 features. If true,
the driver does (it implements v1.1 of the spec),
and if false the driver only uses v1.0 features.
true by default, false if APM_V10_ONLY is defined
when compiling. Really, the driver should be
updated to do APM v1.2 and this option should
either be updated or go the way of the dodo.
used to just be a compile-time option.
apm_bogus_bios (patchable only) controls a few of the APM segment
setup features. (probably should just be a global
and not patchable.)
* make apm_perror print out the full contents of %ax rather than
just the error code, in addition to printing out the string corresponding
to the error code.
* print estimated remaining battery life time as "[<hours>h ]<minutes>m",
which is actually easily understood, rather than as "<hours>:<minutes>
minutes", which is not.
* restructure match and attach so that they work as they should, remove
redundancy, support attaching the APM device but not actually enabling it
so that APM is attached on systems which have it but on which it's broken
in some fatal way.
* add more debugging printfs in the apm control device entry points.
* return EOPNOTSUPP when trying to do a standby ioctl if standbys have
been disabled, rather than returning the less-intuitive ENOTTY.
* rename a few functions for consistency: apmprobe -> apmmatch,
apm_err_translate -> apm_strerror.
* mark a few serious or annoying bogons XXX so people might look at
them later.
* KNF (lots of changes!)
Despite this substantial amount of work, this driver still needs a _lot_ of
work. In particular, the user-land device interface needs to be gutted, and
better support for APM-aware applications and device drivers (i.e. call-backs)
needs to be added (e.g. callback interfaces somewhat like those suggested
by the APM spec).
There are still outstanding known problems with some machines. The true
source of those problems is not currently known, and could be either the APM
BIOSes of the machines in question or this APM driver. However, even if the
problems are caused by APM BIOS bugs, they could be more gracefully worked
around in this driver.
failure. The latter usually would end up being the (nonzero) opcode
placed in %ax before the call, but could conceivably be modified by the
call to be zero. In any case, 0/1 is much nicer than 0/random-nonzero,
as well as being safer.
XXX This (the m68k FPE, not the glue code) is known to be broken for
68LC040/68040V and 68LC060 cpus. This is also the reason we don't
bother to add options FPU_EMULATE to the DRACO configuration file, as
DraCos only come in 68040V (very few) and 68060 variants.
XXX This (the m68k FPE, not the glue code) is known to be broken for
68LC040/68040V and 68LC060 cpus. This is also the reason we don't
bother to add options FPU_EMULATE to the DRACO configuration file, as
DraCos only come in 68040V (very few) and 68060 variants.
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
the server code would always skip all dir entries for a readdirplus
operation. To avoid endlessly retrying clients, try VFS_VGET first,
and it it fails, return NFSERR_NOTSUPP so that client will fall
back to normal readdir operations.
In readdirplus, don't keep such pointers but store the file attributes
in a variable instead until they are needed. Change nfsm_loadattr*
a bit so it can accept a direct pointer to an nfs_fattr structure.
port, which is lifted from amiga port, plus some changes from me:
- Add support for the HP MMU to the 020/030 bus/address error handler
(mostly lifted wholesale from the old code).
- Rename addrerr and buserr to busaddrerr2030. The new name reflects that
these functions are specific to the 68020 and 68030, and that the same
handler function is used for both vectors.
The vector table is patched once we know our CPU type, before the MMU
is enabled. In the event that we're running on a CPU that we're not
configured for, simply invoke the PROM's "reboot request"; we have no
hope of running in the event of a config botch, since we need working
a working bus error handler for console initialization.
These new functions optimze for common-case page faults, eliminate
many run-time checks, and are sharable.
a global variable (yech, but i'm not out to save the world) which had
the same meaning and ended up being stealthily set in pretty much
the same place.
doing 'if (tag == ...) else if (tag == ...) else panic' rather than
by doing a switch. This makes life easier for people who need
the i386 bus_space_* functions to access spaces other than the normal
memory and I/O spaces, because it allows them to define an i386
bus_space_tag_t as a pointer to a function table, rather than just
an int. (They could define it as an int and cast it to a funtion
table pointer, but I think that's bad karma, and this change doesn't
hurt.)
mark all of 0 -> IOM_BEGIN as used, even though there are some regions
which are left for use by the BIOS (namely, the first 4k page and the
area after biosbasemem*1024 but before IOM_BEGIN). Drivers wishing to
manipulate these areas should map them specially, with _i386_memio_map()
rather than bus_space_map() or i386_memio_map().
disabled even if it's attached. If disabled, ENXIO on open.
(2) in the case where the code32 segment len overflows the I/O hole,
instead of giving up truncate it. (In other words, revert
change (2) in rev 1.21 which i suggested mistakenly.)
(3) map bios data space in the 0->640k range with _i386_memio_map()
rather than with bus_space_map(), so that no accounting checks
are done. The checks which are done to make sure that allocation
in this range is safe are sufficient.
(4) check the return value from _i386_memio_map(), and if it indicates
an error disconnect from the APM BIOS, print an error message,
and return without having marked the device 'enabled'.
functions (which only work on memory and i/o space) to i386_memio_*,
and make bus_space_* in bus.h be #defines which invoke them. This makes
life easier for people who need to define the all of the bus_space functions
so that they work on spaces other than memory and I/O space. Also, add
an _i386_memio_map function which is like i386_memio_map but doesn't do
the extent map checking or allocation. _i386_memio_map and i386_memio_*
are for use only by machine-dependent code.
code for this was in my private tree at one time, and I must have
forgotten to g/c the constant from trap.h). Reported by
enami tsugutomo <enami@but-b.or.jp>, PR #3845.
`b_dev' value of NODEV happens and is normal if the buffer is on its way
to the underlying device strategy function for the first time.
Also, MFS sillily uses a major device number (255) which cannot be used
to index bdevsw[]. Check marked with XXXs.
call biowait() but return `success' immediately. We can return `success'
because buffers with recorded errors are not returned by getblk().
(Takes care of PR#3694).
Re-arrange cpuattach() a bit so that more initialization is done before
dealing with the FPU. Some more work is still required to de-couple
FPU detection from the autoconfiguration attach code in SMP systems.
Correct handling for Trap #2 in SunOS executables,
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
'inline' as well as static. mark prototypes for static inline functions
as possibly unused (with __attribute__ ((unused))), to avoid generating
warnings when compiling without optimization but with most ports'
default warning flags. Clean up prototype list spacing, and make it more
consistent.
possibly unused (with __attribute__ ((unused))), to avoid generating
warnings when compiling without optimization but with most ports' default
warning flags.
Use <net/if_ether.h> for ethernet specific definitions, and insert private
definitions for ARP if needed. (The new ARP macros in <net/if_arp.h> are
not used because they create larger code, and we really don't need more
than ethernet/ip support here.)
Add DDB interface to /sys/arch/mips/mips..
Rework heuristic stack traceback to work with DDB.
Add hooks to print exception log from DDB.
Add hooks from pmax console drivers: call Debugger()
after break from serial console, or 'DO' key from LK-xxx.
connect to their 1-wire bus like the DS2404 "EconoRAM Time Chip"
- and -
* Interface function definitions for this kind of chips. Currently only
low-level byte_read and _write, implenented as inline functions.
This functions take a struct ds_handle * (also defined here), which contains
pointers to bit-read/write and reset functions.
Eventually, prototypes for memory-access functions should go here, and the
1-wire bus should be made a BSD auto-configuration bus.
fixed in FreeBSD by John Polstra:
Fix a bug (apparently very old) that can cause a TCP connection to
be dropped when it has an unusual traffic pattern. For full details
as well as a test case that demonstrates the failure, see the
referenced PR (FreeBSD's kern/3998).
Under certain circumstances involving the persist state, it is
possible for the receive side's tp->rcv_nxt to advance beyond its
tp->rcv_adv. This causes (tp->rcv_adv - tp->rcv_nxt) to become
negative. However, in the code affected by this fix, that difference
was interpreted as an unsigned number by max(). Since it was
negative, it was taken as a huge unsigned number. The effect was
to cause the receiver to believe that its receive window had negative
size, thereby rejecting all received segments including ACKs. As
the test case shows, this led to fruitless retransmissions and
eventually to a dropped connection. Even connections using the
loopback interface could be dropped. The fix substitutes the signed
imax() for the unsigned max() function.
Bill informs me that his research indicates this bug appeared in Reno.
architectures), truncate them intelligently instead.
The truncation is done centralized in vnode_pager.c.
This prevents from wrap-over effects when parts of large (>2^32 byte) files
are mmapped.
Don't allow to mmap above the numerical range of vm_offset_t.
This is considered a temporary solution until the vm system handles the
object sizes/offsets more cleanly.
("filename" must be processed by parsebootfile() first).
Being here:
- remove the special "#ifdef MATTHIAS" mainloop
- make some "booting..." output match reality
- print '\n' and '\b' more controlled
the pc532/dev/ncr.c-inspired changes; in particular, wait for previous
transfer to complete before starting another, as we used to do. Retain
splbio() protection and simplified sbc_pdma_in().
identical to the previous incarnation.
- Update using m68k asm.h macros
- Move initialization towards the front of the file
- Rename mac68k_buserr_addr to m68k_fault_addr
- Reorganize trap 15 handler, similar in structure to -- though not as
complete as -- the hp300 version
- Reorganize doboot() for easier integration of external cache, and
make room for the latter (#ifdef __notyet__)
- General garbage collection of unused code/data
_buserr point to the 68020/030 buserr code _only_. This has broken access
error handling in the 060 support code.
This is repaired by jumping to _buserr60 from the 060SP, and by providing
a _buserr60 label identical to the _buserr in the unchanged m68k ports
using the 68060.
permission has in VFS; execute permission permission on a directory is ignored
by AmigaDOS: when translating permissions from AmigaDOS to VFS, set up VFS
execute permission for AmigaDOS-readable directories.
Fixes PR kern/3787 from Michael van Elst <mlelstv@serpens.swb.de>.
is