9d04a424fe
Improve the AMD PHY names.
2001-08-25 01:39:22 +00:00
b6aa674493
Driver for the Altima AC101 10/100 Ethernet PHY.
2001-08-24 17:54:32 +00:00
ce0d046061
Regen; recognize the 79c972's 10BASE-T interface mapped onto MII.
2001-08-23 04:47:36 +00:00
b52818d607
The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
...
onto the MII bus. Recognize it.
2001-08-23 04:47:05 +00:00
4977f2fb2d
Advertize pause capability (802.3x flow control) to peer.
2001-08-06 09:51:40 +00:00
10a5470050
Ops, forgot to commit this one:
...
- kill carrier detection code, it's not that usefull and give false indications
on loaded ethernet segments
2001-08-04 02:21:24 +00:00
7459c35d44
Clean up 1000BASE-SX autonegotiation, and add a way to advertise
...
PAUSE capability.
2001-07-27 22:44:59 +00:00
4333749c7a
Use the bit-swapped OUI for the 5221. (Have I mentioned that I really
...
don't like how the current MII_OUI() works?)
2001-07-27 17:58:20 +00:00
773c261d65
Add a 3Com 3c905B internal PHY.
2001-07-27 17:55:34 +00:00
3d3c5fa78c
Regen; added a 3Com 3c905B internal PHY made by Broadcom.
2001-07-27 17:55:07 +00:00
4063cb411b
Fixup some Broadcom entries, add an entry for Broadcom PHY that
...
is built-in to some 3Com 3c905B cards.
2001-07-27 17:54:40 +00:00
4a416b823f
Fix 1000BASE-X duplex negotiation. That'll teach me to read the
...
manual more carefully next time.
2001-07-25 22:00:43 +00:00
bb93036fa9
Regen.
2001-07-20 07:07:28 +00:00
959f6ee3f3
Adjust for the corrected Marvell entry.
2001-07-20 07:07:05 +00:00
38f94a6fbe
Bleh, I don't like the way our miidevs works now. Repair the
...
Marvell Semiconductor entry.
2001-07-20 07:06:42 +00:00
41a68e94a9
Driver for the Level One LXT-1000 10/100/1000 PHY.
2001-07-12 21:54:40 +00:00
be71426b74
Regen; Add LXT-1000, clean up.
2001-07-12 21:25:31 +00:00
6e65eb3c21
Add LevelOne LXT-1000 10/100/1000 PHY, clean up some Gig-E
...
PHY names.
2001-07-12 21:25:07 +00:00
aef9e7bea3
Code to handle generic ten-bit interfaces (1000BASE-{LX,SX} fiber
...
interfaces).
2001-07-12 18:49:38 +00:00
0e863b15a6
Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY.
2001-07-12 17:30:45 +00:00
39928114d6
Regen; corrected Marvell entries.
2001-07-12 17:29:49 +00:00
511aa23898
Correct Marvell OUI, and 88E1000 model number.
2001-07-12 17:29:18 +00:00
8d829065a6
IFM_1000_TX -> IFM_1000_T, as (breifly) discussed on tech-net.
2001-06-30 17:53:58 +00:00
0b0010a7c3
When probing for a PHY, look at the EXTSTAT bit in the BMSR, as well,
...
not just the media mask. This prevents PHYs/TBIs that only support
Gigabit media from slipping through the cracks.
2001-06-20 01:42:41 +00:00
7914a89b02
Add support for the Seeq 80225 10/100 Ethernet PHY. This is just
...
a stripped-down version of the 80220/80223.
2001-06-19 20:10:54 +00:00
93169d8a94
Regen; added Seeq 80225 10/100 PHY.
2001-06-19 19:51:27 +00:00
5d3c31d576
Add Seeq 80225 10/100 PHY.
2001-06-19 19:51:04 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
f07f44812d
The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR.
...
Note this in a comment. Add the 1000baseT CR and SR bits.
2001-05-31 03:06:46 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
b16ba1d8cd
Add i82562ET id.
2001-05-22 16:04:27 +00:00
199e9f8164
regen
2001-05-17 17:39:30 +00:00
10aff2d3f0
argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
...
They managed to mess it up in a new way.
2001-05-17 17:39:00 +00:00
1ea0cb1ea4
support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER
...
flag is passed in from the board driver
2001-05-17 17:29:54 +00:00
002851041c
re-enable mii_flags in attach args - I've found a use for it: tell the
...
PHY which support it that a fiber interface is present
2001-05-17 17:28:21 +00:00
91d9961f24
Regen
2001-05-15 23:18:16 +00:00
75d77bf185
Add OUI for PMC-Sierra. Add BCM5221 Phy. Add PM8351 Phy.
2001-05-15 23:17:48 +00:00
f5d9baae2f
Note that extended status is in register 15
2001-05-15 23:16:40 +00:00
c2ffdccb2b
Regen; Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:33 +00:00
8fd542b023
Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:04 +00:00
d3a64bd0d8
Add code to recognize and set media on GMII (Gigabit MII) PHYs.
...
802.3 doens't specify ANAR or ANLPAR bits for GMII. Need to
use PHY-specific registers for this, for now, which means we
need specific drivers for the Gigabit-capable PHYs (I think the
most common is the BCM5400).
2001-04-30 19:49:08 +00:00
63604adafa
Add a bunch of Gig-E definitions.
2001-04-30 19:21:03 +00:00
d2ac513298
remove some lint
2001-04-30 01:19:40 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
b728f196e9
Comment out some flag stuff that isn't used. Someone should take a look
...
at this. There is something fishy with the mii code, the last argument to
mii_attach() is not being used in any meaningful way.
2001-04-13 11:14:55 +00:00
205b10ed17
Add a flag to mii_flags which will cause autonegotiation to use tsleep()
...
instead of callout. This way adapters which need a process context for
PHY register access (e.g. USB adapters) have a chance.
2001-04-13 11:12:36 +00:00
372e5956ef
Only install headers which are actually used by our userland. This
...
saves about 2.2MB under /usr/include/dev/. Discussed on tech-kern@
recently.
I HOPE to get the list right. The headers I left in are ones
used for MI tools and those whose usage I discovered by grep over tree sources.
Feel free to put needed includes back in if you encounter anything which
should not be removed from lists.
2001-04-11 07:42:31 +00:00
a6ae0975d5
regen
2001-04-09 09:39:57 +00:00
552d4c8236
add media options for the Intel UCH2 internal ethernet controller
2001-04-09 09:39:24 +00:00
adf9edcd41
update for miidevs changes
2001-03-28 14:16:49 +00:00
3752421a75
regen
2001-03-28 14:15:23 +00:00
bf6a2bf86c
adapt to corrected OUI calculation
2001-03-28 14:14:57 +00:00
9e8def737f
Reading the IEEE specs shows that the bits have to be reversed when
...
mapping an OUI to the MII id registers.
Doing this in the MII_OUI() macro would be too complex, so put it into
a helper function and move the MII id register interpretation stuff
into miivar.h.
2001-03-28 14:13:06 +00:00
a9d20501af
Remove a comment; this module has not been compatible w/ BSD/OS's
...
for quite a long time.
2001-03-24 20:44:26 +00:00
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
6861904096
Regen.
2001-01-07 15:01:06 +00:00
55c57a573f
Add an Altima PHY.
2001-01-07 15:00:46 +00:00
232e2c5ef9
Regen.
2000-11-07 13:53:59 +00:00
0dc9fd53b9
Just print 'Intel' for their other OUI.
2000-11-07 13:53:42 +00:00
5a356af882
Regen.
2000-11-06 22:32:49 +00:00
75367f830a
Add some OUIs and models. From OpenBSD.
2000-11-06 22:32:26 +00:00
2383226766
Silence format warning.
2000-10-11 22:03:33 +00:00
10debdeb9c
Fix to autonegotiation problem with some fxp cards. Fix found and reported
...
by Erich T. Enke et al. on current-users. This fixes PR 10550.
2000-07-27 22:14:48 +00:00
49014bf59f
Restructure the PHY entry points to use a structure of entry points
...
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for the LXT-970 which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
2000-07-04 03:28:59 +00:00
ea313649ff
defopt MIIVERBOSE
2000-06-11 02:13:34 +00:00
e169e0018c
Regen.
2000-05-08 13:26:05 +00:00
43c5780ae1
Allow a verbose description to be printed with the option MIIVERBOSE.
2000-05-08 13:25:34 +00:00
56aa5c16d1
Add another AMD chip.
2000-05-08 13:23:21 +00:00
fa07b81e43
Make to match also MII_OUI_DAVICOM.
...
(This seems to work, but any GENERIC does not have dmphy...)
2000-04-02 03:06:19 +00:00
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
411a31adb2
- Go to splimp() when sending the rtsock message regarding link status.
...
- Would like to notify protocols if a link goes up or down, to e.g.
restart Duplicate Address Detection, etc. Add a comment to this
effect.
2000-03-15 20:34:43 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
a084fd2f81
Some PHYs go off into left field for a few seconds if you attempt to kick
...
autonegotiation while it's already enabled.
2000-02-03 06:11:13 +00:00
9ff57fe506
Oops, missing return;
2000-02-03 05:38:57 +00:00
22fe15d7b4
Let mii_phy_setmedia() handle the IFM_AUTO case, too.
2000-02-02 23:34:56 +00:00
8923ca0b00
Make PHY drivers provide a pointer to their status routine, and add
...
a generic mii_phy_status() that calls back into the PHY. It doesn't
do anything interesting yet, but it will soon.
2000-02-02 17:50:43 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
0738a5d4ac
Driver for the Davicom DM9101 10/100 Ethernet PHY. This PHY is found
...
on several inexpensive 10/100 Ethernet boards (e.g. D-Link DFE-530TX,
Winbond 10/100 boards), and is also the built-in PHY on the DM9102
10/100 Ethernet chip.
2000-02-02 04:29:49 +00:00
c74e0a8db2
Add detachment support to the MII layer.
2000-01-27 16:44:30 +00:00
380035a59d
Regen.
2000-01-13 20:16:49 +00:00
81ae0fb432
Add a Broadcom PHy used in the D-Link USB100 adapter.
...
There's no special driver for this PHY (yet).
2000-01-13 20:16:08 +00:00
03c8221ad0
Use BMSR to test for `negotiation complete'; the alternative bit in the
...
LXT vendor register 20 is latching high and resets to low on read causing
subsequent status request to return `IFM_NONE'.
1999-12-21 10:47:00 +00:00
b67d4809ed
Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
...
Ethernet PHY.
1999-12-07 19:36:37 +00:00
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
6c50cb64e1
Common module for bit-bang'ing the MII.
1999-11-17 17:47:59 +00:00
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
00ba1a42eb
Fix a braino in some currently-disabled code.
1999-10-27 19:05:44 +00:00
be9104dd8d
Define ANAR and ANLPAR bits that are used to negotiate the 802.3x PAUSE
...
feature.
1999-09-29 22:49:33 +00:00
45a337e088
Add a PHY `offset' (e.g. "first PHY on bus, second PHY on bus, ...") to
...
the PHY's softc.
1999-09-25 00:10:13 +00:00
6c591e77d0
Fix botched RCS IDs.
1999-09-16 05:58:18 +00:00
60feba0646
Spacing.
1999-09-07 21:52:06 +00:00
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
f04cb4036f
move common support functions for phy drivers from mii.c to mii_physubr.c,
...
so that they are not includes if no PHY is configured
(avoids code bloat if an interface driver has the "mii" attribute but
mii is not used by the particular version)
1999-08-03 19:41:49 +00:00
e314d1d844
Correct the sense of the PCR_FLINK100 bit. From Dave Sainty, PR #7832 .
1999-07-14 23:57:36 +00:00
50f084159c
SCTRL2 register number wrong. PR #7756 , Johan Danielsson.
1999-06-20 16:42:37 +00:00
23ddff5688
use the new "xx" prefixed OUIs because the mapping to the ID register
...
bits differs from the MII_OUI() way
1999-05-14 11:40:28 +00:00
48c49dcb82
regen
1999-05-14 11:38:05 +00:00
416a47bc88
Define OUIs in a more uniform way. OUIs are fixed entities registered
...
with IEEE, so use the "real" OUIs for definitions.
Now unfortunately vendors differ in how the MII ID register bits are
used wrt bit and byte ordering. There is a straightforward way - bits
numbered from LSB to MSB - used by AMD, Intel, NS and QS. This is used
by the current MII_OUI() conversion macro. ICS, Seeq, SiS and TI count
the bits as they appear on the wire, and some differ completely.
Account for these cases by "xx" prefixed OUI definitions which compensate
for this, so the MII_OUI() macro can still be used.
Add AMD (the "real" AMD this time) and the 79c973 PCnet internal PHY.
1999-05-14 11:37:30 +00:00
5ea46286eb
mii_phy_auto(): don't rely on an implicit declaration of the waitfor argument.
1999-04-26 14:48:57 +00:00
83f9ab3c87
Implement asynchronous autonegotiation when driven by the MII tick
...
(one-second clock). Prevents .5s delays every 5 seconds when the interface
is up but there is no link. Fixes PR 7361.
1999-04-23 04:24:32 +00:00
01ea9a1dd8
Regen.
1999-03-24 21:07:26 +00:00
029f0b9d86
Silicon Integrated Systems OUI and the SiS 900 PHY model number.
1999-03-24 21:07:04 +00:00
58beb19c16
Regen.
1999-02-05 20:20:04 +00:00
53089c1ade
Add oui for Davicom Semiconductor, and add Davicom DM9101 10/100 PHY.
1999-02-05 20:19:44 +00:00
f9467ddb8e
Some PHYs are really braindead, and report incorrect IDs. Simplify the
...
test for this, and probe for PHYs based on media in the BMSR.
1999-02-05 02:46:34 +00:00
f9e92fac23
Fix bit test
1999-01-29 07:35:05 +00:00
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
c755434d9d
Regen.
1998-11-05 03:43:57 +00:00
84def70194
Add AMD's OUI, and the model number for the AMD 79C873 10/100 Ethernet PHY.
1998-11-05 03:43:43 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
afbf922a93
Don't print the revision of the 3c905B-TX's internal PHY; it's meaningless.
1998-10-23 01:52:50 +00:00
thorpej