59706f1322
clean up and consistency for CP0 Count, Compare, Wired, and Config
...
access function names and prototypes.
2000-10-05 02:36:44 +00:00
b1b364243d
always have to declare cpu_arch and the related constants (since setting
...
it isn't conditionalized). (d'oh!)
2000-10-05 02:13:14 +00:00
7fefa594f7
add two blank lines
2000-10-05 01:17:20 +00:00
36123017cb
nuke mips3_clearBEV(). There's really no point in coding a
...
special-purpose assembly routine for things like this.
2000-10-05 01:06:06 +00:00
3f1d3c3066
tweak cpu_arch. Eliminate all direct checks of it (making them
...
use the macro CPUISMIPS3 -- which is badly misnamed), and set it
from #defines named CPU_ARCH_N (where N is 1..5, 32, 64).
2000-10-05 00:52:59 +00:00
2fa1ccfa6e
bootpath_build(): implement slighly more clever algorith to find boot
...
flags in the bootpath: only treat the rest as boot flags if the '-'
follows whitespace (space or tab)
This should fix the "boot disk4 netbsd-20001004-RFHS8036" lossage
Hubert Feyer pointed out in private e-mail.
Tested by: jdolecek (userland version)
Reviewed by: eeh
2000-10-04 23:05:08 +00:00
e9e1084ea3
rename mips_read_causereg -> mips_cp0_cause_read. nuke prototype
...
for mips_read_statusreg (which was apparently never implemented).
Provide prototypes and implementations for mips_cp0_cause_write,
mips_cp0_status_read, and mips_cp0_status_write. (Writing can, of
course, be quite dangerous.)
2000-10-04 22:44:01 +00:00
0c84fad435
more rnd(4).
2000-10-04 22:26:49 +00:00
6638fc7c06
Fix interrupt lossage problem and some cosmetic changes.
2000-10-04 22:18:25 +00:00
8b8afc8d07
the generic MIPS code doesn't even play at doing anything useful
...
with a MIPS4 option at this point -- all the code except for one single
spot is conditionalized with MIPS3. So, don't even pretend about
MIPS4 for now, until it all gets cleaned up.
2000-10-04 21:41:47 +00:00
13eb329ef1
provide indicators of a few more things that might go in opt_cputype.h
2000-10-04 21:31:06 +00:00
b0ee22422c
Regenerate from INSTALL.
2000-10-04 20:44:53 +00:00
6458912fb4
regenerate: INSTALL changes as implemented in GENERIC and Makefile.
2000-10-04 20:40:06 +00:00
986619df97
Reimplement the INSTALL changes in GENERIC and Makefile.
2000-10-04 20:38:11 +00:00
1c9bb33fcb
resync, mostly for the rnd addition.
2000-10-04 20:13:42 +00:00
779fc41d88
enable rnd(4)
2000-10-04 18:14:35 +00:00
39787038e9
Switch to MI mk48txx driver.
...
XXX All config files should be updated since now clock address does not
XXX contain clock register offset in NVRAM.
2000-10-04 16:35:43 +00:00
3f1232147d
Initial bus_space(9) support for news68k. From hp300.
2000-10-04 16:26:43 +00:00
478ab76ca3
experimental power management support for TX3912/TX3922 based model.
2000-10-04 13:53:54 +00:00
8d263719b9
Merge exception return path of SystemCall and UserGenException into
...
proc_trampoline.
2000-10-04 08:46:21 +00:00
9fa9ef4716
Add rnd.
2000-10-04 08:26:42 +00:00
9e47af8814
enable rnd device. they are now mandatory for ssh/sshd support,
...
so it makes more sense to enable it.
please disable them if there's any issues, but in that case, in-tree
ssh/sshd won't work.
2000-10-04 03:35:53 +00:00
832204750a
fix mistake of sigmarion cmdmap.
2000-10-04 03:31:14 +00:00
a46cefdf5b
Redo the previous change to save MIPS1 only configuration. It's
...
uncertain whether a multiple page flush with a single HitFlush()
call is safe.
2000-10-04 02:02:05 +00:00
11e8e89dd4
add some additional info re: MIPS32 PRID encoding, derived from
...
the ``MIPS32 4K Processor Core Family Software User's Manual
Revision 01.07 June 19, 2000", available on the web from:
http://www.mips.com/declassified/Declassified_2000/MD00016-2B-4K-SUM-01.07.pdf
2000-10-03 23:15:58 +00:00
2f6ed1a331
Reorganize news68k clock device configuration and
...
prepare to switch to MI mk48txx driver.
XXX news68k does not have bus_space(9) support yet.
2000-10-03 13:49:24 +00:00
6b207c8f05
Add netbsd.ecoff to list of files to cleanup. Forgot in previous commit.
2000-10-03 10:09:12 +00:00
ff5d9dc3a7
Change default kernel format from ECOFF to ELF now we can boot ELF using
...
libsa based bootstraps. This is now the prefered format.
ECOFF format kernel renamed to netbsd.ecoff - still required for network
booting.
2000-10-03 09:46:39 +00:00
e705396abb
Switch to MI md_root.c
2000-10-03 09:38:20 +00:00
af1dcf13da
flash led when intrrupt.
2000-10-03 03:16:16 +00:00
c419b94c00
vr41xx LED unit driver.
2000-10-03 03:13:04 +00:00
ca7374c959
add POWERCONTROL_LED.
...
add PMEVENT_AC, PMEVENT_BATTERY.
2000-10-03 03:08:33 +00:00
fc21cc81e1
- Hide MachHitFlushDCache() symbol by enclosing #ifdef MIPS3 to make
...
compilable with MIPS1 only configuration.
- MIPS3 virtually addressed cache op can do its work in a single call for
range of address space.
2000-10-02 22:56:51 +00:00
8dbc5c0c51
provide mips3_ld() and mips3_sd(), functions which provide safe wrappers
...
for mips3 (and later) 'ld' and 'sd' instructions. These currently
only are properly implemented for the _MIPS_BSD_API_LP32 and
_MIPS_BSD_API_LP32_64CLEAN 'API's. They're pretty messy, but when you
need them, you really need them.
2000-10-02 22:13:38 +00:00
2824f4906d
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
...
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
c29947d800
Switch to MI md_root.c.
2000-10-02 15:24:09 +00:00
654c1d3603
Adjust after some comments from Noriyuki Soda:
...
apm was enabled in the wrong file, it's not needed in INSTALL_LAPTOP,
but should be there in GENERIC_LAPTOP.
wss0 at isa irq 10 may cause conflicts on some laptops; remove it.
Despite its name, PCIBIOS_INTR_GUESS is safe option, so enable it.
2000-10-02 12:54:39 +00:00
32a995f65b
Oops, remove test leftover setting of REALEXTMEM.
2000-10-02 12:22:53 +00:00
09440c52d2
Squeeze some more. Do what it has been advertising all along: no SCSI. Use
...
-Os. Remove NFSSERVER.
2000-10-02 08:12:04 +00:00
2bc18c0ead
Add parenthesis to TICKS_TO_USECS macro avoiding side-effects.
...
Fixes glitch where microtime goes backward. KNF rules!
2000-10-02 07:58:26 +00:00
d7ff540d90
Boot to multiuser by default.
2000-10-02 07:57:29 +00:00
68e8ad5120
Fixup missing entries in chrtoblktbl
2000-10-02 07:56:31 +00:00
77c68f1f9c
downsized kernels for installation & recovery
2000-10-02 07:54:34 +00:00
ee8000c4ad
check NBIVIDEO.
2000-10-02 04:15:51 +00:00
3c83f44fa3
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak
2000-10-02 04:14:59 +00:00
59de160368
- DPRINTF -> VPRINTF for verbose.
...
- don't attach other video driver under hpcfb.
2000-10-02 04:03:06 +00:00
938b01e688
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,
2000-10-02 03:57:53 +00:00
a50307118c
add sigmarion cmdmap and use it.
2000-10-02 03:45:10 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
d26132e2be
cpu_initialize: global registers aren't preserved across calls to
...
prom_printf(), so replace %g3 with %l7 (which isn't used despite
the `usage' comment).
Also, clean up white-space turds.
2000-10-01 19:13:16 +00:00
442b9b5df2
Get the correct OF node of the screen because PowerBooks have two screens
...
in one PCI device.
2000-10-01 19:08:30 +00:00
f88fbde7ac
don't reset RTC in tx39clock_set()
2000-10-01 18:12:04 +00:00
f47a0f34f9
Squeeze even more by removing some COMPAT_1X options, com* (serial
...
ports aren't supported for installation), MFS, slip and ppp. There
was no room for pppd and slattach on the "tiny" floppies anyway, so
there was nothing to use them.
Add pcic at isa, pcmcia, wdc at pcmcia, and 'wireful' cards @ pcmcia
(ne, ep, mbe, sm). Installing is now possible on a 4M laptop over
ethernet (tested with ep at pcmcia, and 640+3200 available memory).
2000-10-01 16:20:01 +00:00
2c7ec6839c
In ems_init(): make sure there's valid data in the buffer after sending
...
a TALK command to a device. Noticed by Ken'ichi Ishizaka.
2000-10-01 05:10:57 +00:00
ccac45b532
Modify keymaps of MC-R and MC-CS series to add backlight control keycommand.
...
Modify keymap of btnmgr to add backlight control keycommand.
Add backlight control function to bivideo.
2000-10-01 03:45:33 +00:00
d7e0d02e8b
Add include of <machine/asm.h>. C_LABEL is defined there.
2000-09-30 20:40:34 +00:00
ec2e9cd4c8
Add PCB_REGS_* defines. This makes ddb compile again.
2000-09-30 20:36:40 +00:00
890dedaed3
Set the # of ptys to 2.
2000-09-30 13:25:12 +00:00
8e5075103f
This seems to fix the interrupt lossage of non-debug kernels.
2000-09-29 17:02:38 +00:00
cdb3d9df80
Add sip* at pci.
2000-09-29 14:45:59 +00:00
2e6f523813
Bump CPU_MAXFAMILY to 7.
2000-09-29 14:17:17 +00:00
3cb9873a8d
Recognize Pentium 4. Treat everything with model > 6 as model 7 for now,
...
in the hope that Intel doesn't start number backwards now that they
picked 15 for the P4.
2000-09-29 14:16:23 +00:00
243ae4806b
oops, typo in previous (|| -> &&)
2000-09-29 13:15:48 +00:00
33234ff066
Don't print anything when the serial number is not supported. There are
...
a lot of other features that may not be supported either, no need to
print them.
2000-09-29 13:05:12 +00:00
caccbc2e21
Add kernel support for memory disks
2000-09-29 12:43:14 +00:00
e256cfb9ec
Fix a bug that prevents the kernel from detecting the root device.
2000-09-29 10:14:20 +00:00
62da00b60c
clean up printing when serial number not supported or disabled.
2000-09-29 09:07:53 +00:00
be5f26e138
print CPU serial number at boot time. After all, we have a million other flags printed, what's one more interesting one.
2000-09-29 09:03:18 +00:00
3c5d2c7fac
avoid SH7709A's serious bug (it fails to read IPR* registers under particular
...
circumstances)
2000-09-29 08:08:37 +00:00
623e319553
add support for 12-bit color displays, from Timm Wetzel w/ changes by
...
me. closes 10741.
2000-09-29 06:35:57 +00:00
a295f43fb1
merge lines
2000-09-29 06:33:37 +00:00
b01c657c80
add RCONS_BPP16 for color display
...
also lose esp0 since i have no disc in this machine, and build symbols.
2000-09-29 06:33:17 +00:00
44c2ad4763
add RCONS_BPP16 for color display
2000-09-29 06:32:38 +00:00
15eaba378c
Only call pcons_dopoll() if there's a pcons device.
2000-09-29 00:27:13 +00:00
5c98160d2b
Separate user and kernel address spaces and move the kernel down to
...
0x0000000001000000 -- 0x00000000f0000000, below the PROM where the
PROM thinks we should be.
2000-09-28 19:56:13 +00:00
d21456569e
Fix INTR_SETUP() to properly distinguish kernel and user addresses.
...
Make microtime() return the correct time on %tick machines.
Re-enable debug stuff in dostart for now to detect kernel mapping issues.
2000-09-28 19:27:49 +00:00
1090c8a9cf
probeget() actually handles 64-bit values so fix the prototype.
2000-09-28 19:16:35 +00:00
0ca74ba0d8
Fix the `trap type 0x10' problem. Apparently, something has changed and
...
now makes use of lockmgr(). Since we broke into the debugger from an interrupt,
we don't have a curproc, so when lockmgr() tries to find our PID it barfs,
causing another break into DDB which then calls the mysterious code that
calls lockmgr() again.....
So set doing_shutdown while we're in DDB so lockmgr ignores locks.
2000-09-28 18:54:39 +00:00
59ef356b35
Reintroduce the ACPI memory map code. The bug that caused the
...
IDT to be scribbled over on some systems was found and fixed by
T.SHIOZAKI <tshiozak@netbsd.org>.
2000-09-28 18:31:36 +00:00
154f1e86b1
fix tx39clock_alarm_refill bug.
2000-09-28 16:18:26 +00:00
6776b270ae
Remove unneeded cache flushes.
2000-09-28 15:47:27 +00:00
a6205d98a9
Poll pcons for input on softints in case someone want to break into the debugger.
2000-09-28 15:38:49 +00:00
abeb734bb9
Cannot distinguish kernel and user addresses any more.
2000-09-28 15:34:38 +00:00
5b577f0c8f
Add a command that locates the page structure corresponding to a pa.
2000-09-28 15:32:36 +00:00
3a2599ebec
Don't take ref/mod faults on DMA segments mapped in to the kernel.
2000-09-28 15:28:43 +00:00
a5a8082482
Use prom_printf() for debugging instead of printf() since the console may
...
not be functional.
2000-09-28 15:23:06 +00:00
25ce73d7b3
Fix bad path specifier for finding fpu sources.
2000-09-28 15:19:56 +00:00
126ba78048
We do wired page accounting. Tell UVM about this.
2000-09-28 14:03:38 +00:00
f41561e9de
We do wired page accounting. Tell UVM about it.
2000-09-28 13:09:10 +00:00
5aa0a5abb1
Prior art in naming would suggest INSTALL_SYSINST rather than INSTALL-SYSINST.
2000-09-28 12:46:43 +00:00
2c86369fc4
The Atari pmap does wired page accounting; advertize it to UVM.
2000-09-28 09:09:28 +00:00
670b06c6e0
Move config_console() out of the grf-layer. This allows for more than just
...
grf-type consoles (wscons). Config_console() is now called from consinit(),
just after setting up the kernel msgbuf, so debugging is easy(er).
To further facilitate this move, the pcibus now allows for early-console
attaches by allocating static bus_space_tags (no mallocs possible at this
point).
2000-09-28 07:26:48 +00:00
6cb04802f1
Nuke cf_unit abuse.
2000-09-28 06:39:52 +00:00
af27893736
Correct some typos.
2000-09-28 06:32:10 +00:00
a89f788198
Move the grfbus out of std.atari. You don't want a grfbus defined on headless
...
and wscons setups.
2000-09-28 06:19:06 +00:00
c2672f184b
Fix the type of pmap_zero_page_uncached from void (paddr_t) to
...
boolean_t (paddr_t) to make it compile again.
2000-09-28 03:41:50 +00:00
f9521e4c70
Set the boundary to NBPG for bus_dmamap_create(). The IOASIC DMA segment
...
can not cross a page boundary. This fixes a problem when a dump(8) buffer
just crossed a page boundary and bus_dmamap_load() would coalesce the
the overlap onto the first segment. The NEXTPTR value would get set to
-1 when starting the DMA transfer and the residual data for unaligned
transfers would be copied to physical address 0x1ffffffc. On the R3000,
this would result in corrupted data, and on the R4000 would usually result
in a hard system hang.
2000-09-28 03:27:29 +00:00
226b343323
Need to use MachHitFlushDCache() for the MIPS3 to ensure invalidating
...
both the primary and the secondary caches. MachFlushDCache() will not
invalidate the correct secondary cache lines for KSEG2 addresses.
R4000 systems should now be able to boot and run.
2000-09-28 03:19:12 +00:00
643b30ef1d
Admit that we count wired pages.
2000-09-27 21:34:29 +00:00
c84826de03
Enable usb devices that may be useful during the install (hubs, keyboard,
...
ethernet, mass storage).
2000-09-27 20:41:35 +00:00
2b673aaef8
Add -V and -D bootflags to print out debug info in pmap_bootstrap() and
...
a fix for non-DEBUG kernels.
2000-09-27 18:20:33 +00:00
8a0dc83e07
Fix for prev (define fl).
2000-09-27 18:16:01 +00:00
0ab2301b6b
hot plug support.
2000-09-27 17:32:34 +00:00
3a999fb11f
A GENERIC and INSTALL tailored for laptop usafe (i.e. cardbus and
...
PCIBIOS options included).
2000-09-27 16:57:09 +00:00
0619e37229
Reduce ramdisk size to the amount that is really needed for optimal
...
space saving. Reduce number of ptys to 2. Use NFS_V2_ONLY.
2000-09-27 16:54:56 +00:00
48b43cdfb9
Remove some less-needed items to save space. Also add NFS_V2_ONLY,
...
to save more space. For installs, NFSv2 will do just fine.
2000-09-27 16:09:18 +00:00
e1c01aff60
remove obsolete files.
2000-09-27 13:42:14 +00:00
d3cf7525d3
add 'options VNODE_OP_NOINLINE' to reduce size.
2000-09-27 10:22:22 +00:00
6ec1be8054
apply 'hpckbd' change.
2000-09-27 10:21:23 +00:00
82d4c9df0e
add DoCoMo sigmarion cover button.
2000-09-27 09:32:23 +00:00
b1d64a728d
add DoCoMo sigmarion keymap.
2000-09-27 09:30:47 +00:00
5712405584
cross-compile properly
2000-09-27 08:28:34 +00:00
25365607f3
minor aesthetic changes, plus explicitly state this is public domain
2000-09-27 08:24:02 +00:00
97e929ff45
define PCB_REGS_* so that kdb compiles again
2000-09-27 08:23:50 +00:00
489ed1a908
The Duo ADB controller doesn't notify us that it needs to be polled
...
through the (emulated) VIA. Work around this problem by polling the
Power Manager chip directly. From Daishi Kato, PR 9852.
2000-09-27 03:57:51 +00:00
29923311f1
Set up ADB hardware type before making decisions based on same.
...
This is part of PR 9852 from Daishi Kato.
2000-09-27 03:27:23 +00:00
7c2fc39588
Now that we do collision detection and assign all ADB devices to distinct
...
addresses, it makes sense to print the actual address of the device rather
than the original address. The latter is useful to distinguish the type
of device only, so we maintain that data internally (as we always have).
This closes PR 10557 from Dave Huang.
2000-09-27 03:22:05 +00:00
ceb69697cd
Backout previous commit.
...
loadfile_machdep.h doesn't belong in /usr/include/machine
Pointed out by Simon Burge
2000-09-27 02:06:08 +00:00
f487c6c12e
check whether both COMPUTEXEVB and SH7709A is defined to access special
...
register.
2000-09-26 22:23:55 +00:00
7c1b5c5599
fix SDMR settings:
...
- s/BSC_SDMR_VAL/BSC_SDMR3_VAL/
- add options COMPUTEXEVB
2000-09-26 22:20:03 +00:00
008eadbac6
UltraSPARC machines don't have FP queues. Don't let userland code set them.
...
It tends to break the FPU emulation code.
2000-09-26 22:05:50 +00:00
1bf0f4630f
Use a cast to handle syscall() copyin case with 64b clean ctx save/restore.
2000-09-26 18:24:45 +00:00
d6f992112d
No longer save $at on syscall entry. v1 does appear to be used as if
...
you do not save it and pass it along in rval the system will start
to fail running user programs. This finishes the suggestion by cgd to
not save some registers on syscall entry.
2000-09-26 18:22:12 +00:00
a21df3ae8e
fix R3900 FlushCache bug.
2000-09-26 17:47:40 +00:00
a01a66c525
cac* at eisa? reported as working.
2000-09-26 11:51:14 +00:00
bbec09cae1
Add stand directory to build process
2000-09-26 11:45:06 +00:00
7378a103a0
Much needed installboot utility. Manual page to follow.
...
Builds and installs from stand directories, but untested from higher
level makefiles.
2000-09-26 10:00:19 +00:00
50e120c13f
Parse boot string intelligently to extract the boot device options.
...
This permits boot from any SCSI ID
2000-09-26 09:48:35 +00:00
7495cd76b1
Since we don't have a lseek function in the PROM firmware standalone libs
...
we have to poke the data structures directly to force the offset we need.
The open() function returns with the address of the IO control block in
register t0 so we take a copy of it for our brute-force lseek function.
This should be reasonably portable since the firmware writers closely
follow UNIX semantics and the open stubs should recompile and use the
same registers. May break on the rebadged clones -- buyer beware.
The alternative is to use dummy reads to go forwards and reopen followed
by dummy reads to go backwards. It takes around 60 seconds to boot
using this method if we use a clean filesystem.
Tested with firmware versions 5.40 and 5.43
2000-09-26 09:32:25 +00:00
9b4e50f624
Second stage bootstrap:
...
- Rename from boot.mipsco -> boot to be consistant with other ports
- use ELF format
2000-09-26 09:11:04 +00:00
1eec339f4b
First stage bootstrap is stored on boot sectors in ECOFF format. Ensure
...
entire file fits within the imposed limit.
2000-09-26 09:06:50 +00:00
215a3a5491
Add support for booting off RAIDframe RAID1 mirrors.
...
Check the first partition type in devopen(), and if it is of type
FS_RAID, add 64 to blkdev_part_offset.
NOTE: This brings the size of the alpha first-stage bootblocks up to
close to the maximum. RAID1 support is controlled by the
BOOTXX_RAID1_SUPPORT define, and is easy to disable if size
becomes an issue.
2000-09-26 05:13:36 +00:00
2e79bfed2d
Missing `#if defined(MULTIPROCESSOR) || defined(LOCKDEBUG)'
2000-09-25 21:02:38 +00:00
ea0dd8a5fb
Reenable VNODE_OP_NOINLINE, and some white space nits.
2000-09-25 14:05:32 +00:00
3ef92f0bdb
Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
...
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
ccf1c822a6
Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
...
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
eb2da98d92
#include <sys/reboot.h> would probably suffice for those.
2000-09-25 09:03:32 +00:00
67afa9cfe2
- when PMUINT_BATT or PMUINT_BATTINTR interrupts occured,
...
send CONFIG_HOOK_PMEVENT_SUSPENDREQ event.
2000-09-25 03:51:28 +00:00
1efb55d0b4
- add debug/verbose functions.
2000-09-25 03:47:37 +00:00
5125b04184
- can compile these files.
...
#include <sys/boot_flag.h>
2000-09-25 01:56:56 +00:00
dd5d3287ec
Use "etext" instead of "_etext" like db_trace.c,
...
which makes it be linked by a.out ld.
2000-09-24 23:46:37 +00:00
c3202405d5
Support half-duplex mode (use only one DRQ).
...
Fix PR #10308 .
2000-09-24 23:40:12 +00:00
f9f2c92422
this file was oversight at first (pointed out by is):
...
Add new boot flags -v, -q, which switch on AB_VERBOSE or AB_QUIET
respectively. This follows recent bootverbose/bootquiet changes.
2000-09-24 20:56:04 +00:00
2308091f66
update usage message (new flags -v, -q)
2000-09-24 18:28:18 +00:00
b135d5504a
netbsd_opts.c was removed as part of bootverbose/bootquiet changes
...
Pointed out by Lennart Augustsson in private e-mail.
2000-09-24 18:13:54 +00:00
5836de14e4
Fix a bug introduced in BOOT_FLAG change.
2000-09-24 16:16:37 +00:00
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
4833accce2
In mem_regions(), remove zero sized entry returned from OF.
...
Since this function uses size == 0 to delimiter, valid entries must not
contain 0 in size field.
G4 Cube should boot now. :-)
2000-09-24 15:57:03 +00:00
4317291e1a
Make HTABSIZE calculation work with >1GB RAM.
2000-09-24 15:26:34 +00:00
5fea96167f
use new generic bootverbose instead of local definition
2000-09-24 12:37:03 +00:00
cgd