bad
a4e508928f
Oops. RcsID police.
1999-03-22 23:01:36 +00:00
bad
2c16793ee5
Chipset driver for TROPIC based Token-Ring cards.
...
Frontends for IBM and 3COM ISA cards.
By Onno van der Linden <onno@simplex.nl>.
1999-03-22 22:21:26 +00:00
drochner
b2c812d776
set "fontset" variables to 0 if no appropriate font was found for a
...
freshly allocated screen, should fix panic if "vga_mapchar()" it
attempted later
1999-03-22 18:24:23 +00:00
erh
fc841e81b5
Get the index on the buffer (in addition to the descriptor) correct.
1999-03-19 22:43:11 +00:00
mjacob
008b51d0a6
Update the driver with some infrastructure for the 1080. Fix an embarrassing
...
clock botch bug. Additional infrastructure for PDB change stuff.
1999-03-17 06:15:47 +00:00
erh
f4ccb35266
Add a "+1" in sca_start which should fix the limit of 2 transmit buffers. Also, kill some duplicate code.
1999-03-16 21:29:23 +00:00
jonathan
69d2d27c1b
Use bus_space tags and handles, embedded in MD hooks AM7930_{READ_WRITE}_REG
...
to handle MD delay and bus padding. Tested on sparc2 by David Brownlee.
Should use regmaps, but that breaks sparc pDMA assembly code.
1999-03-14 22:29:00 +00:00
minoura
1ff51fea1a
Some x68k conditionals (I don't know why these are needed...).
1999-03-14 16:14:54 +00:00
bouyer
a6365676fa
Add a new disk flag: DRIVE_OLD for pre-ATA disks. probe routine will now set
...
DRIVE_OLD, DRIVE_ATA or DRIVE_ATAPI based on register signatures.
The attach routine will issue a IDENTIFY command for ATA/ATAPI disk,
to detect flase matches by the probe routine.
probe/attach should now be fully compliant with ata-4/ata-5. As a side
effect, ATAPI drives which improperly use ATA register signatures should now
be attached as ATAPI.
1999-03-10 13:11:43 +00:00
bouyer
ba74f49e60
Keep track of CRC errors in Ultra-DMA mode. If we noticed a CRC error and we
...
need to downgrade, downgrade to PIO, as it has been shown if we got CRC errors
in Ultra-DMA mode, we will have silent data corruption in multiword DMA mode
(isn't IDE wonderfull ? :).
Set timeout to 1s for "normal" ata I/O, to minimise the effects of missed
interrupts.
1999-03-07 14:02:53 +00:00
dante
199f99d192
fix second level interrupt handler to allow 64 bits pointers
1999-03-04 20:15:53 +00:00
pk
80b321b11a
sparc => __sparc__
1999-03-03 12:58:14 +00:00
explorer
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
dante
198f1f5c48
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:21:33 +00:00
dante
eab52d94b3
Fixed AdvanSys Ultra Wide driver to work on Alpha.
1999-02-23 20:18:16 +00:00
scw
fc658e2d3e
Don't update the CORx registers unless they really have changed.
...
Also make console Tx handling wait until the Tx FIFO has drained and
the shift-register is empty before sending console characters.
1999-02-21 14:01:50 +00:00
abs
b86f85e1cc
wdcwait is called initially without any device on my thinkpad.
...
This breaks the first WDCDEBUG_PRINT. Handle this case.
1999-02-21 02:07:52 +00:00
hubertf
99626f33a3
Only #define WDCDEBUG if it isn't already defined (e.g. by some options
...
in the kernel config file).
1999-02-20 23:47:52 +00:00
drochner
bd047d30a0
complete mapping table for pcvt fonts, make dual-font selection work
...
as intended
1999-02-20 18:27:53 +00:00
drochner
9ad8930d16
complete mapping tables a bit so that ASCII (ie vt100) art looks better
...
even without extra fonts loaded
1999-02-20 18:26:13 +00:00
scw
3a5b0d88ca
That #define splserial() really didn't want to be there...
1999-02-20 16:23:39 +00:00
scw
0ed9dc11d7
Delay serial port parameter changes until the Tx FIFO has emptied.
1999-02-20 00:27:29 +00:00
leo
e54f78017e
This one needs <machine/bswap.h> too.
1999-02-19 20:58:51 +00:00
minoura
38803874bb
Translated Japanese comments.
1999-02-19 16:19:53 +00:00
mycroft
28bc4dfeca
Oops; PCIC_INTR_ENABLE does something *very* different.
1999-02-19 03:14:00 +00:00
mycroft
70d4ac07b6
Yet another path where we need to set PCIC_INTR_ENABLE.
1999-02-19 00:27:45 +00:00
mycroft
18e341a954
Add separate halt_input and halt_output methods in ad1848_isa, which disable
...
the DMA channel.
1999-02-18 17:27:39 +00:00
bouyer
7e5acb7709
Don't print an extra newline if the controller doesn't support 32 bits access.
...
Pointed out by Dave Huang.
1999-02-18 14:45:31 +00:00
thorpej
cfb2342145
Fix the code in epic_attach() that frees resources when the attach fails.
1999-02-18 02:24:30 +00:00
thorpej
5c457e71fe
Only do the multicast filter bug work-around if in 10Mbps mode. Also,
...
don't reset the interface if the multicast list changes. Just reprogram
the multicast hash table.
1999-02-18 02:12:09 +00:00
mycroft
27963c294a
Use the trigger interface, and clean up a pile of cruft.
1999-02-17 23:05:28 +00:00
mycroft
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
thorpej
6d0cb6e410
Change a straggling splimp -> splnet.
1999-02-17 09:11:29 +00:00
thorpej
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
mycroft
7741cae143
Fix slight ommission in previous.
1999-02-17 02:43:13 +00:00
mycroft
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
is
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
is
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
bouyer
d683e62685
Be less strict on ATAPI signature, at last one CD puts 0x00 in sc instead
...
of 0x01.
1999-02-15 18:47:59 +00:00
hubertf
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
thorpej
e523f4968b
Make sure full-duplex is reflected in TXCON, and don't reset the interface
...
when the media changes.
1999-02-13 21:08:08 +00:00
minoura
4d5a04afc4
MI version of the Fujitsu MB89352 SCSI Protocol Controler (SPC) driver.
...
Based on experimental NetBSD/pc98 ISA/PISA version, which was derived
from the MD /sys/arch/x68k/dev/spc.c.
1999-02-13 17:33:14 +00:00
scw
94719c7b9a
New MI front-end for the Cirrus Logic CD240[01] Multi-protocol
...
Communications Controller.
This is still a work in progress, but it is functional enough to
be usable.
1999-02-13 17:05:19 +00:00
drochner
960dfa5227
oops - forgot to convert the trivial case (ASCII) to "match levels"
1999-02-12 15:49:43 +00:00
drochner
525932e022
make the probe stricter to catch cases where the chipset doesn't pull
...
the data lines to "high" for not-existant devices
1999-02-12 12:45:48 +00:00
drochner
b515442160
Display the danish o-slash as phi/Theta as proposed by
...
Soren S. Jorvang <soren@t.dk>, with a lower match level.
Display the other accented characters which are not present in the IBM
character set by their non-accented equivalents, with an even lower
match level.
1999-02-12 11:32:50 +00:00
drochner
dbdaf91650
change the "mapchar" interface to return a "quality" or "match level"
...
arguments which allows to find approximations for characters which are
not present in a font
1999-02-12 11:25:23 +00:00
thorpej
e8823cc3f3
Cleanup of the EPIC/100 driver I did while hacking on the Rhine driver:
...
* Macroize hardware and software descriptor access (much easier to read).
* Simplify and optimize the transmit loop a bit, and use IFF_OACTIVE as
appropriate.
* Fix a potential race condition in the transmit loop. This change has
made the driver significantly more stable (almost completely eliminated
the "device timeout" errors that have plagued this driver).
* Implement transmit interrupt pacing.
* Add missing bus_dmamap_sync() calls (on transmit and receive descriptors
and fraglists). (Draining the write buffer when accessing these structures
may have also contributed to the increased stability of this driver on
the Alpha.)
1999-02-12 05:55:27 +00:00
thorpej
873e1d2a51
Fix printf format problems on Alpha.
1999-02-12 01:51:37 +00:00
thorpej
1ab6db8e5f
Fix printf format problems on Alpha.
1999-02-12 00:50:09 +00:00
minoura
c5847e98a9
void* -> u_int32_t
1999-02-10 16:00:54 +00:00
mjacob
3c21a2493b
Roll internal release tag. Print out if we're in a 64 bit PCI slot.
...
Use fast memory timing NVRAM parameter. Clean up and fix establishment
of default target parameters. Don't use NVRAM if are flagged as not to
do so (I had a busted NVRAM setup which I couldn't edit that enabled SYNC
mode but disabled disconnect/reconnect and wide!!). Fix delays after
resets. BUS resets not done in isp_init anymore- relegated to OS
specific outer layers. Fix a buglet where you can get in a loop for
a NULL xs in the completion list in isp_intr. Add in some defines that
can disable fast posting. Add in code for Loop Up/Loop Down events that
call into the outer layers as to what to do.
1999-02-09 00:52:23 +00:00
mjacob
0cf98e4e12
Roll internal release tag. Roll core version minor. Fix broken DPARM_DEFAULT
...
define. Add a new config flag param (ISP_CFG_NONVRAM) whose intent it is
to cause NVRAM to be ignored. Add ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP
isp_async enums.
1999-02-09 00:46:25 +00:00
mjacob
d8d9458410
fix a couple of NVRAM defines
1999-02-09 00:44:42 +00:00
mjacob
c1adc949c2
roll internal release tag
1999-02-09 00:44:06 +00:00
mjacob
6a8ebccd6a
Do SCSI Bus resets in this layer (now). Don't do it for Fibre Channel yet
...
(we get LOOP DOWN events, and we'll hang on that at this time).
Add other isp_async cases- ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP. DOWN
will cause internal queuing until UP, whereupon a timeout will fire up
any pending xfers. It doesn't really keep commands from getting destroyed
by loop down events, but at least minimizes the damage. This was much
easier to implement with CAM.
1999-02-09 00:42:22 +00:00
mjacob
ee45547dde
Roll platform revision level. Add blocked flag and waitq to osinfo structure.
1999-02-09 00:37:35 +00:00
bouyer
1e0e78854a
There's no ATA draft where it is required for the drive to set DRDY | DSC when
...
the disk is ready to transfer data, and in ATA-5 the DSC has been obsoleted.
So only wait for DRQ to transfer data. This can be made conditional on the
ATA version if it's proven to break with some drives (worked with all the
drives I have access to).
While I'm there correct a few typos.
1999-02-08 15:22:28 +00:00
thorpej
6eedee5c9d
Add entropy gathering.
1999-02-07 01:54:50 +00:00
mycroft
0c7afe477d
Separate the tiocm code into functions, like the z8530 code, and fix the same
...
DTR bug.
1999-02-03 23:57:27 +00:00
mycroft
568f4aa704
Minor changes to tiocm code.
1999-02-03 23:51:06 +00:00
mycroft
9be96dda95
Fix an inconsistency: PPS was turned off on first open, but the mode may have
...
still claimed it was enabled.
1999-02-03 23:22:11 +00:00
mycroft
535f59cc81
Slight redux in PPS code.
1999-02-03 23:20:33 +00:00
mycroft
b3a56d0097
Catch up with a change to the stint interface.
1999-02-03 20:22:28 +00:00
mycroft
b63b0fd80b
Redo the N previous changes, plus a couple of other things:
...
* Move the printf() delay to just after the printf(), where it actually makes
sense.
* Use zstty_stint() and zstty_softint() from zsparam(), to force an immediate
update of the carrier and flow control status. Abuse this in the attach and
open functions to defer all of that work. This insures that we don't lose
any status updates.
* Don't screw with register 1 when closing the console.
* Fix bugs in TIOCM??? (stay semicolon, clearing DTR while transmitting).
* Add comments in a couple of places.
1999-02-03 20:15:51 +00:00
marc
9231ba8603
- make sure that sc->handle[i].flags is initialized in all cases
...
- check PCIC_FLAG_SOCKETP before disabling the CSC_INTR.
1999-02-01 22:17:05 +00:00
wrstuden
36c50aaa14
Add the patch I floated on tech-kern. Andreas Eltrich <elchy@dahoam.de>
...
says it got pppd working for him.
1999-01-31 21:41:00 +00:00
minoura
8ed711f1bc
MC68450 DMAC regs.
1999-01-30 14:58:26 +00:00
mjacob
6bcdc2b5d2
Implement and use Fast Posting for both parallel && fibre. Redo a bit of
...
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
1999-01-30 07:31:50 +00:00
drochner
a7f50b8178
Debugger() -> console_debugger() to honour the ddb_fromconsole sysctl
1999-01-26 17:08:37 +00:00
wrstuden
ccf442a971
Fix thinko in part of rev 1.53.
...
Thanks to Scott for pointing this out to me (I got his mail and figured out
this change before seeing the discussion on tech-kern) and to Charles for
the initial explanation.
1999-01-25 17:53:13 +00:00
msaitoh
88176e7d20
Fix about insertion/removal event problem.
1999-01-21 07:43:32 +00:00
bouyer
a1471db64a
move wd.c:print_wderror() to ata.c:ata_perror().
...
In wdc_probe_caps() add code to guess the ATA revision supported (if
ATA4 if Ultra-DMA, ATA2 if PIO mode > 2). We can't rely on param.atap_ata_major
here, at last one Ultra-DMA drive claims to support only ATA-3.
Use the ATA version in ata_perror(), and to try a flush cache command
in a shutdown hook for IDE drives.
1999-01-18 20:06:24 +00:00
mjacob
83270f242f
If you're BIG_ENDIAN and use bswapXX, pull in the header file that prototypes
...
these functions.
1999-01-18 19:17:00 +00:00
pk
ed55ba4db9
Need <machine/bswap.h>
1999-01-18 11:51:43 +00:00
ross
5709f532d1
Random compile nits in BHADEBUG code.
1999-01-14 04:47:18 +00:00
drochner
23cfea8327
-implement new wscons font handling with separate download and selection
...
calls
-support use of 2 fonts simultanously; this costs the ability to
"highlight", ie to use the upper 8 colours
-define screen types "80x25bf" and "80x50bf" which use this ability
-add conditional code to deal with the weird mapping of pcvt's
supplemental fonts
1999-01-13 16:48:58 +00:00
christos
e79b8222a6
Put back modem control ioctl's
1999-01-13 11:55:20 +00:00
drochner
9b1eddc4f1
- Set up the interface watchdog timer on sends. This fixes the hangups
...
reported by Matthias Scheler <tron@lyssa.owl.de> in PR kern/6772.
- After receiving, check whether the receive DMA pointer became 0
what obviously happens if the list runs out of entries. Simply reinit
in this case. This fixes receive lockups after DDB use observed
by myself.
Unstall the receive engine if the ELINK_UPPKTSTATUS indicates that it
was stalled. (Don't know when this might happen. FreeBSD does so.)
1999-01-10 14:19:46 +00:00
mjacob
9d702f60ed
+ Some basic deadchip detection.
...
+ Enable FIFO bursts, but also detect bogus 1040A with busted FIFO.
+ Use new MEMZERO crossplatform define.
+ Handle RQCS_QUEUE_FULL status case and let upper layer parse SCSI ststus
byte if nonzero (should be 0x28- Queue Full status)
+ Fold ISP_NVRAM_FIFO_THRESHOLD_128 into isp_fifo_threshold tag.
1999-01-10 05:07:53 +00:00
mjacob
f1dfa06e13
bump isp_fifo_threshold tag top 3 bits
1999-01-10 05:04:46 +00:00
mjacob
b503bb5337
cross platform define MEMZERO added
1999-01-10 05:04:18 +00:00
drochner
98e630dbe0
Allow to deallocate also the currently visible virtual screen (unless
...
it is the console).
This requires vva_show_screen() to catch the case where it has no screen
to switch from, ie no need to save the current state.
1999-01-09 15:29:26 +00:00
augustss
0d32a9a78b
Fix more `void *' arithmetic.
1999-01-08 19:22:34 +00:00
thorpej
71c86e3e92
Changes to NCR53c9x driver necessary to add support for the AMD Am53c974
...
PCscsi-PCI SCSI controller. From Izumi Tsutsui, PR #6654 .
1999-01-06 19:19:38 +00:00
christos
dfd0f0f949
PR/6669: Michael Eriksson: pcic_chip_mem_alloc() can't handle large requests
1999-01-01 14:05:18 +00:00
augustss
44df4dcc85
Add a wscons display type `unknown' that the generic VGA driver can
...
return until someone fixes it for real.
1998-12-30 13:54:03 +00:00
mjacob
e5e787230b
clean up headers; move uninit/watch to outer layers
1998-12-28 19:10:43 +00:00
msaitoh
2718914e14
fix incorrect panic message
1998-12-25 16:50:08 +00:00
nathanw
788ff053de
Fix up support for PCI attachments of pcic devices on i386 in general,
...
and the Cirrus Logic CL-PD6729 in particular.
From danw@mit.edu in PR port-i386/6436.
1998-12-20 17:53:28 +00:00
thorpej
92229a04c1
Quiet some diagnostic messages when we might expect them to happen.
...
PR #6460 , Rafal Boni.
1998-12-18 21:50:16 +00:00
bouyer
c37bf0ccb4
Keep track of DMA errors, and downgrade the transert mode (UDMA ->DMA,
...
DMA->PIO) in case of 2 consecutive errors. Don't downgrade if the
PIO/DMA/UDMA modes were forced by a config flag.
1998-12-16 13:02:03 +00:00
bouyer
94f32463dc
Add a callback to re-compute the modes used on a channel.
1998-12-16 12:46:47 +00:00
mycroft
95aa0d0b7d
Simplify the copy loops a bit.
1998-12-12 16:58:10 +00:00
mycroft
90b7cbc727
Simplify argument to MGET(), to generate better code.
1998-12-12 16:36:24 +00:00
mycroft
a6717054a4
Slight simplification to previous.
1998-12-12 16:31:34 +00:00
bad
fe3ce4e89a
Simplify the code dealing with the mbuf chain in dp8390_get().
1998-12-11 18:03:55 +00:00
bad
ba8bdebedd
Change a comment to reflect reality.
1998-12-11 16:01:16 +00:00
tls
2fbbdcc0cb
Fix bug that caused all ifp's to have if_xname ntwo0, which was rather inconvenient. Should use config_found on each port instead, but this works for the moment and it's quick.
1998-12-09 23:25:41 +00:00
thorpej
7a9cc5bfbc
Update for changed scsipi_xfer struct.
1998-12-09 08:37:50 +00:00
leo
5335909035
BVME410 ethernet driver by 'maximum entropy'.
1998-12-09 07:33:59 +00:00
augustss
1b499d8ce6
Make the OPL information string more informative.
1998-12-08 14:26:56 +00:00
bouyer
997074f17c
Add a missing 'return' in an error path; noticed by Matthias Drochner.
1998-12-08 13:29:31 +00:00
mjacob
d610e1ad3f
Update BA for new max_lun parameter for SCSIbusses. Clearify maximum luns
...
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
1998-12-05 19:48:23 +00:00
mjacob
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
pk
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
bouyer
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
bouyer
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
bouyer
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
bouyer
1d5d5ab40a
In struct wdc_xfer, change 'channel' to a pointer to a channel_softc, to avoid
...
a double-pointer dereference at run-time. Suggested by Matthias Drochner.
1998-12-02 15:53:34 +00:00
bouyer
45675ab14b
- change drive_flags from u_int8_t to u_int16_t
...
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
pk
adbfb3777a
Update previous: we don't have the required information all the time.
1998-11-30 07:54:29 +00:00
pk
0f8cfb66f0
Some more misc. cleanup in the same style as previous.
1998-11-30 07:44:24 +00:00
pk
9860d69b7e
Announce negotiation of async mode consistently (Soren Jorvang; PR#6512)
1998-11-30 07:34:06 +00:00
bouyer
5f088e0243
wdcstart(): Re-add support of shared xfer queue across multiple channels
...
(was lost between 1.44 and 1.45).
1998-11-29 17:34:49 +00:00
thorpej
96da1decd9
Fix media probe on non-MII chips.
1998-11-29 01:40:46 +00:00
thorpej
18e7f69220
Update for new pcmciabus attribute.
1998-11-27 21:59:18 +00:00
augustss
9726cfd1fb
Make the copyright header conform to the NetBSD template.
1998-11-25 22:17:06 +00:00
kenh
1f676cda09
Implement the AT_READREG flag. This is needed for the CHECK POWER MODE
...
ATA command (among others).
1998-11-23 23:02:11 +00:00
wrstuden
f0559087e0
Changes to deal with mac serial ports having clock sources on DCD or CTS.
...
- When doing a first open, don't enable receive & status interupts before
the MD layer has had a chance to set things up.
- Enable logic to only enable DCD/CTS interupts if we are looking for/
expecting interupts on those pins. Disable otherwise.
- in zs_param, only pass up the state of ZSRR0_DCD if we have enabled
interupts on that pin.
Henry Hotz (<hotz@jpl.nasa.gov>) and Greg walsh <gwalsh@artec.com> have
tried these changes to get certain printers from hanging at boot. They
work in a 1.3.2 kernel for Greg.
1998-11-23 22:10:09 +00:00
drochner
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
kml
ba30effcf8
Changes to support a HIPPI Framing Protocol device, which allows raw
...
HIPPI packets to be written without having to go through the network
stack.
1998-11-20 04:12:57 +00:00
thorpej
4ba3417429
Implement reference counting for ATA adapters.
1998-11-20 01:22:37 +00:00
kenh
396aa17f77
Sigh, my bad. Check for chp->wdc being NULL before trying to deference it.
...
(I didn't realize the ISA wdc front-end doesn't fill in chp->wdc).
1998-11-19 22:50:21 +00:00
thorpej
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
thorpej
afc84158d1
Back out revision 1.40. That change couldn't have POSSIBLY worked, since
...
when wdcprobe() is called, the wdc_softc pointer in the channel_softc
hasn't even been intialized!
1998-11-19 19:52:42 +00:00
kenh
1461c4fb20
__wdccommand_done() needs to call wdcstart(), otherwise you can run
...
into deadlocks when using wdc_exec_command().
1998-11-19 04:07:54 +00:00
thorpej
3e086bd63d
Add support for detaching "com" instances.
1998-11-18 23:58:52 +00:00
kenh
58932a8415
Quirk out the first test in the beginning of wdcprobe(); the Vaio
...
CD-ROM drive doesn't like it for some reason.
1998-11-18 19:12:08 +00:00
thorpej
1d0f24882d
Now that the *_activate() functions don't do things which are attachment
...
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej
dd6750820c
Expose the "enable" and "disable" functions so that the front-ends can
...
access them.
1998-11-17 20:25:00 +00:00
bouyer
b64b7c2964
New IDE xfer flag: C_SENSE, set by the ATAPI back-end sense info needs to
...
be retrieved.
1998-11-17 14:14:52 +00:00
thorpej
0c3ca7b31e
Finish implementing interrupt-driven card insertion and removal support.
...
- Deactivate the card on removal and queue a REMOVAL event for the socket's
event thread to finish the detach.
- Queue an INSERTION event for the socket's event thread on insertion.
Implement a few missing infrastructure pieces to support this.
Hot swapping of PCMCIA cards now "works". (Not quite; things like network
devices need changes for their respestive subsystems. These changes are
coming soon...)
1998-11-17 08:49:11 +00:00
thorpej
fc44652721
Implement a kernel thread per PCMCIA socket to handle card insertion and
...
removal events.
1998-11-16 22:41:01 +00:00
thorpej
d2afdb5b59
Fix some whitespace lossage, canonicalize some media names.
1998-11-16 19:13:31 +00:00
mycroft
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
bouyer
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
msaitoh
21e1b057bc
Sorry, I forgot to revert "#if 0".
1998-11-09 07:01:47 +00:00
veego
2749e8b74a
We don't need the pci headers here.
1998-11-08 22:02:25 +00:00
kenh
e58cf6b359
Add definitions for the ATA power management commands
1998-11-05 22:49:09 +00:00
msaitoh
37bbf03777
fix pcic_chip_socket_enable() to works on more machines.
1998-11-05 07:55:48 +00:00
fvdl
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
thorpej
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
thorpej
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
thorpej
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
nisimura
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
dante
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
kleink
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
nisimura
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
thorpej
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
thorpej
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
scottr
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
scottr
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
scottr
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
christos
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
christos
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
bouyer
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
is
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
chuck
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
bouyer
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
is
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
bouyer
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
mycroft
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
perry
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
dante
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
dante
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
bouyer
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
bouyer
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
bouyer
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
bouyer
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
msaitoh
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
bouyer
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
dante
423c1d8dd3
Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
...
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
thorpej
11bc54234b
In epic_init(), attempt to start output on the interface once the interface
...
is initialized.
1998-10-05 19:10:22 +00:00
matt
d9cb3415b1
Fix typo (pointed by Matthias Drochner).
1998-10-02 20:00:28 +00:00
drochner
1693b8b4a6
minor changes to console handling in zstty_attach():
...
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
number is known
1998-10-01 18:52:42 +00:00
matt
bf8783afa4
Fix the receive length so it includes the extra bytes in the fddi_header.
1998-09-28 20:37:12 +00:00
matt
43b462df88
Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
...
and dmasync the data. Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
matt
a1528c368d
Fix transmit handling (this also should speed up transmits
...
slightly).
1998-09-28 17:13:54 +00:00
dante
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
dante
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
dante
c6ccd1d83f
Remove Wide boards references
...
Adjust copyright
At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
mark
7d6c07a559
Use the data32iot and data32ioh members of the wdc_attachment_data
...
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
mark
962edcdc03
Add data32iot and data32ioh members to the wdc_attachment_data structure.
...
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
pk
0b10e1ddab
Parallel port support routines.
1998-09-21 21:26:51 +00:00
matt
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
matt
08e1d890a4
Changes so that BPF readers will get the data in fddi packet aligned along
...
normal boundaries. This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
matt
935fbed4fe
Make sure data in FDDI packets are aligned nicely (for alpha, etc.)
1998-09-19 21:21:25 +00:00
mjacob
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
mjacob
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
mjacob
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
mjacob
cb787c768d
add some target mode definitions
1998-09-17 22:51:54 +00:00
mjacob
24717f3c3a
cleanup header to be just NetBSD
1998-09-17 22:50:53 +00:00
is
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
scottr
7aa4d4483e
Revert the last change: returning COMPLETE is clearly the wrong thing to do
...
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
scottr
0af57c2461
Correct a serious problem that affects at least front ends that can only
...
use PIO (or equivalent) code to do asynchronous transfers: In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so. This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
1998-09-14 05:56:14 +00:00
mycroft
32f42fe1e9
Make sure all voices are deallocated on close.
1998-09-13 04:41:34 +00:00
jonathan
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
kenh
9539399333
Add support for passing device quirks from the attachment routine,
...
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
1998-09-10 19:24:45 +00:00
mjacob
4a1ccd2fe7
turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case
1998-09-10 17:10:27 +00:00
thorpej
9ce5ae6b97
Protect Debugger() call a'la uha driver. PR #6070 , Gary D. Duzan.
1998-09-09 05:28:58 +00:00
thorpej
d1fba4e7e5
Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt
...
context. Reported by Lennart Augustsson.
1998-09-09 05:17:53 +00:00
mjacob
a79310ba38
Major reworking of initialization code, addition of NVRAM reading, usage
...
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
1998-09-08 07:28:50 +00:00
mjacob
6e2341ae63
Roll major revision. Change some definitions around. Add more current device
...
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
1998-09-08 07:27:04 +00:00
mjacob
542648bf0e
Move all ASYNC definitions here (after all, they're mailbox registers).
...
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
1998-09-08 07:24:23 +00:00
mjacob
170521610e
Add more ASYNC event codes here. Add NVRAM definitions.
1998-09-08 07:22:06 +00:00
mjacob
c0eabb441f
add case for going from probetime to runtime speeds
1998-09-08 07:19:58 +00:00
mjacob
9752520872
roll revision, change default tagging to simple tags
1998-09-08 07:18:56 +00:00
pk
b871ab5f2c
Use the new "%b" format for the various control register bits.
1998-09-06 21:39:33 +00:00
christos
344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
mark
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
is
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
pk
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
jeremy
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
pk
fec2fa9e43
Typo in device Id mask.
1998-09-01 21:04:43 +00:00
cgd
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
pk
860867bfec
macro argument protection.
1998-08-31 11:13:10 +00:00
pk
73b946e04e
LSI64854 DMA engine driver.
...
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
dante
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
thorpej
370a38c007
Add braces to make egcs happy.
1998-08-28 20:03:10 +00:00
thorpej
f3bfb08d45
When determining the default media on the Vortex/Boomerang, don't pick
...
the full-duplex variant. XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
pk
b1447741da
Nuke Dprintf; fix formats.
1998-08-28 08:59:14 +00:00
pk
dd0709d28d
Add selected `%b' bits.
1998-08-27 20:05:11 +00:00
pk
142bff0170
Add missing entries and make it slightly more verbose.
1998-08-27 19:53:02 +00:00
pk
b3279eb3dc
Move a few prototypes.
...
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
pk
fc397afa14
debug level 0
1998-08-26 15:06:37 +00:00
dante
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
augustss
6633896a67
Do some renaming of registers and make sure we get sound in both
...
channels on OPL3.
1998-08-26 13:08:10 +00:00
augustss
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
thorpej
bc21c243cd
For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
...
in epsetmedia() if full-duplex is selected (new feature on these cards!)
On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer. Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
thorpej
19b759c2e4
Define the full-duplex bit in the W3 MAC CONTROL register.
1998-08-26 01:29:03 +00:00
pk
d4ec33b5f0
The new MI part of the AD1848 driver.
1998-08-25 22:36:40 +00:00
tv
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
augustss
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
pk
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
pk
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
thorpej
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
thorpej
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
augustss
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
matt
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
thorpej
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
mycroft
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
thorpej
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
thorpej
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
thorpej
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
thorpej
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
mycroft
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
mycroft
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00