52c11b789a
bump kame revision id
2000-03-02 07:15:39 +00:00
36649fea92
don't configure ifa_dstaddr for non-pointopoint interface,
...
so that we won't be returning them from routing socket manipulation.
2000-03-02 07:14:52 +00:00
ded4e9540a
properly handle notifies from icmp6, so that we can properly reflect
...
redirects/unreach to transport layer. (sync with latest kame)
2000-03-02 06:42:52 +00:00
754bba7b6c
Avoid a bug in GCC which manifests itself when processing unaligned
...
IP options. Problem pointed out by Matt Hargett and Erik Fair, analyzed
by me.
2000-03-02 06:07:36 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
97be07a6c4
Remove probe/attach for PNP0C02. There are reserved motherboard regions.
...
Thanks to Adam Glass for catching this.
2000-03-01 20:24:53 +00:00
866ee72838
Add pnpbios_io_unmap
2000-03-01 20:23:55 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
7d57276982
Do partial lazy I-stream sync -- in the pmap_enter()/pmap_remove() cases
...
for now. More to come.
2000-03-01 18:29:04 +00:00
8f2f22b47c
increase kernel version to 1.4U (5 more to 1.4Z!)
2000-03-01 12:52:11 +00:00
04ac848d6f
introduce m->m_pkthdr.aux to hold random data which needs to be passed
...
between protocol handlers.
ipsec socket pointers, ipsec decryption/auth information, tunnel
decapsulation information are in my mind - there can be several other usage.
at this moment, we use this for ipsec socket pointer passing. this will
avoid reuse of m->m_pkthdr.rcvif in ipsec code.
due to the change, MHLEN will be decreased by sizeof(void *) - for example,
for i386, MHLEN was 100 bytes, but is now 96 bytes.
we may want to increase MSIZE from 128 to 256 for some of our architectures.
take caution if you use it for keeping some data item for long period
of time - use extra caution on M_PREPEND() or m_adj(), as they may result
in loss of m->m_pkthdr.aux pointer (and mbuf leak).
this will bump kernel version.
(as discussed in tech-net, tested in kame tree)
2000-03-01 12:49:27 +00:00
13d92f98ce
Remove unnecessary asterisk in comment (probably it was comment leader of
...
multiline comment).
2000-03-01 03:51:29 +00:00
543db3a000
Cosmetic changes.
2000-03-01 03:50:04 +00:00
908f6bc4cd
Infrastructure for lazy istream sync in the pmap module:
...
- Add a bitmask for the CPUs which need an isync before this pmap returns
to userspace on that CPU.
- Define PMAP_USERRET(), a utility macro for userret() to use to process
the deferred isync, and call it as appropriate in userret().
2000-03-01 02:22:03 +00:00
a192dc9c5b
PMAP_ISACTIVE() now takes the cpu_id. This serves two purposes:
...
- Everywhere it was used, the cpu_id was already computed, so this
saves computing it again.
- This will be needed for lazy istream sync.
2000-03-01 01:32:45 +00:00
14050f197e
Make this compile in DEBUG/DIAGNOSTIC case.
2000-03-01 00:44:53 +00:00
ba4e755a9c
Change the cmd argument in {audio,mixer}_ioctl() to u_long.
2000-03-01 00:44:35 +00:00
64911f1d2e
Use cpu_number() here instead of alpha_pal_whami().
2000-03-01 00:43:34 +00:00
a1a05c5cf9
include <sys/cdefs.h> since <net/netisr_dispatch.h> needs __CONCAT
2000-03-01 00:17:17 +00:00
fac7fc369f
Put machine check info in cpu_info in the multiprocessor case, and
...
just have one statically allocate machine check info structure in the
single processor config case.
2000-02-29 22:19:53 +00:00
04d9239b1e
Reset mc_received after we've done a badaddr probe.
2000-02-29 21:42:54 +00:00
7d05674ba7
Distinguish between device and interface classes.
...
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
c47506aed1
more fix to ancillary data alignment. we need padding after
...
last cmsg_data item (see the figure on RFC2292 page 18).
2000-02-29 19:14:59 +00:00
8cc92d88cf
Add USB tty device.
2000-02-29 19:08:54 +00:00
a6a5be8ccf
This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
...
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
b95fbdaeb7
Regen
2000-02-29 19:07:33 +00:00
eff003f7ce
add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
...
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
352a87f7bd
fix a too agressive s/CIA/UBA/ (e.g change SPEUBAL back to SPECIAL) in the
...
header.
2000-02-29 17:42:32 +00:00
8aaab5c387
add missing cpu dependencies
2000-02-29 17:13:27 +00:00
8cde772948
Oops.. Need to note the parity status when we unconfigure.
...
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
5c1b7efe97
avoid copy-overwrite-copy on incoming udp4 checksum. use in4_cksum
...
which takes care of pseudo header checksum without overwrites.
2000-02-29 16:21:56 +00:00
37eb9eebc2
Initial import prep port.
2000-02-29 15:21:20 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
6f5dadba1c
Cleanup warning comment which is now irrelevant. Reorder codes.
2000-02-29 09:03:30 +00:00
d93aaefb84
- Have SYS_DEV_xxx device cookie symbols to select and install proper
...
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 07:20:21 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
82ab98145f
ensure tcp window size does not overflow (16bit unsigned after window scale).
...
FreeBSD PR: 16914
2000-02-29 05:25:49 +00:00
a6e403e50b
Remove unnecessary cast for kernend variable when grabbing proc0 USPACE.
2000-02-29 04:55:54 +00:00
7eeaa2a1fa
NLE_PMAX symbol in le_pmax.h has gone.
2000-02-29 04:44:29 +00:00
582e9de235
- Have SYS_DEV_xxx device cookie symbols to select and install proper
...
interrupt handlers into intrtab[] array, rather than the idea of devices
in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 04:41:47 +00:00
19c22771f3
Check and clear the appropriate IOASIC SCSI interrupt bits when in polled
...
I/O mode. Kernel dumps will now work with the IOASIC SCSI devices.
2000-02-28 18:51:25 +00:00
d788e0dbad
Make sure to initialize xs->req_sense_length (to 0). This appears to be
...
a historical leftover, and very few drivers actually look at it. But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
03f0ac370f
make ICMPv6 redirect actually flush route cache in udp6/raw6 socket.
2000-02-28 16:10:52 +00:00
d8dfd96b2c
fix ICMPv6 redirect input. the bug can result in invalid ND entry.
2000-02-28 14:30:36 +00:00
cdea88d700
support draft-ietf-ipngwg-icmp-name-lookups-05.txt, drop support for
...
draft-ietf-ipngwg-icmp-name-lookups-04.txt.
There are certain bitfield change in 04 draft to 05 draft, which makes
04 "ping6 -a" and 05 "ping6 -a" not interoperable. sigh.
2000-02-28 13:48:50 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
bbe25244d0
remove some of cross-BSD portability #ifdef.
...
remove xxCTL_VARS, which is BSDI specific.
2000-02-28 12:08:21 +00:00
d28bd11715
unix2dostime(), dos2unixtime(): use value of rtc_offset to shift the time value
...
accordingly
Patch sent by Naoki FUKAUMI in kern/9497.
2000-02-28 10:43:08 +00:00
c627d45cc3
(fxp_init): don't clear the FXPF_MII flag as this results in a panic
...
when detaching
2000-02-28 10:16:17 +00:00
86ae2ab1fc
Add ADEV_NOSENSE quirk for HITACHI CDR-7730.
...
Patch sent by Hume Smith in kern/9489.
2000-02-28 09:46:25 +00:00
a87f80ad5f
Give the VPP bits better names.
2000-02-28 07:33:08 +00:00
17f933f6ce
Add missing break that hosed multicast.
2000-02-28 06:44:52 +00:00
d2b929f576
Fix naming think-o.
2000-02-28 05:30:19 +00:00
e0573deb3b
Another ID for ESS. From Dave Huang <khym@bga.com>
2000-02-28 00:22:33 +00:00
8841a11f4d
- Disestablish an interrupt if failed to enable the card.
...
- If card isn't enabled, just set given information into softc. Addresses
PR#9457.
- Some cleanups and cosmetic changes.
2000-02-27 23:10:51 +00:00
71df610aeb
Remove no longer necessary workaround for hpcmips.
2000-02-27 22:57:20 +00:00
10d9610df8
Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com>
2000-02-27 22:15:24 +00:00
7b4eccb432
Use DPRINTF for debug messages.
2000-02-27 21:06:55 +00:00
739151c214
Regen.
2000-02-27 20:44:22 +00:00
741c59a303
Add the QuickShot Strikepad game-pad.
2000-02-27 20:43:53 +00:00
45b36632c0
Add code (off by default) to keep track of the signal strength of the last
...
few packets received from different MAC addresses.
2000-02-27 20:40:42 +00:00
0468fe97e4
Don't use hardcoded speed value when this is a console. Instead, read
...
from zs. (because OF-3.x uses 57600 bps)
2000-02-27 20:31:57 +00:00
d128de6bc6
Change miniroot size to 3072.
2000-02-27 20:26:07 +00:00
61cc77895b
Some minor cleanup to the probe code.
2000-02-27 20:01:05 +00:00
f101e8315f
Add gmac. (commented out)
2000-02-27 18:06:43 +00:00
6f4bb03178
Initial version of gmac ethernet driver.
...
XXX doesn't work well yet.
2000-02-27 18:00:55 +00:00
0086d842d5
Rewrite stdarg/varargs.
2000-02-27 17:50:20 +00:00
74ca33774a
only include i386/include/reg.h on i386.
2000-02-27 17:30:10 +00:00
6c10d82f8d
Add (commented out) PCIBIOS options so people can find them easily.
2000-02-27 16:51:39 +00:00
dc8f1b2cb9
UCB1200 GPIO support.
2000-02-27 16:37:50 +00:00
c26429fac5
UCB1200 GPIO routines.
2000-02-27 16:34:13 +00:00
fc0a27a970
cosmetic changes
2000-02-27 16:28:13 +00:00
20e5cfa32f
Billionton Systems Inc. LNT-10TN card.
2000-02-27 11:15:47 +00:00
d386caeaec
regen.
2000-02-27 11:14:43 +00:00
663c327808
Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card.
2000-02-27 11:14:03 +00:00
959ca07b4b
add hw.alignbytes sysctl mib. this gives you the value of ALIGNBYTES
...
at the kernel compilation time (ALIGNBYTES that the kernel uses).
2000-02-27 06:13:35 +00:00
b22af17c02
Add 'Sharp HC-1200' and divide MC-CS1x into MC-CS11, 12 and 13.
2000-02-27 05:47:34 +00:00
d03ca248f1
Add envsys_basic_info_t and envsys_tre_data_t. The more specific
...
typedefs should probably be deprecated.
2000-02-27 04:10:30 +00:00
9a06ea04a2
Fix the same race condition while initializing the socket.
2000-02-27 03:25:03 +00:00
7794bfe183
Reorder the usage of intr_establish/intr_disestablish with respect to setting
...
the CSC_INTR register, to insure that the IRQ is not left floating and enabled
at any point. Eliminates stray interrupts during the IRQ probe.
2000-02-27 03:08:00 +00:00
a4a133213f
Add empty token_ifdetach().
2000-02-27 03:04:09 +00:00
cf3085176e
Nuke all the code associated with the INITIALLY_LEVEL_TRIGGERED() lossage, and
...
instead register a shutdownhook to restore the PIC state.
2000-02-27 02:50:31 +00:00
8c46e74418
Nuke some debugging output that got left in by mistake.
2000-02-27 02:35:33 +00:00
82419f5ae9
Only mark the components as CLEAN if it's the last thing we're doing.
...
Marking them CLEAN earlier is (currently) asking for trouble.
(XXX This could have been done more elegantly.)
2000-02-27 01:50:22 +00:00
544ffa4528
Force polling on pcic, so I get another IRQ for cards.
2000-02-27 00:15:30 +00:00
a3ae8af043
Allow a flag to be set to force polling for socket events.
2000-02-27 00:14:27 +00:00
76a60b98d3
Install pio.h.
2000-02-26 22:15:40 +00:00
198dbed79d
Pull in <sys/types.h> for the benefit of those things which include
...
<machine/sysarch.h> but don't pull in <sys/types.h>.
2000-02-26 20:12:56 +00:00
16c31080a5
IT8368E legacy mode requires mode change between I/O access and
...
attribute memory access. XXX
2000-02-26 19:02:22 +00:00
0958e8149a
x86-style PIO ops for USERLAND ONLY! Requires -lalpha.
2000-02-26 19:00:51 +00:00
df88882d80
- Add a bus space method for getting the translation for a window.
...
- Add sysarch methods for "get bus window count", "get bus window",
and "pci conf read/write".
These are a hack, but they're what's necessary in order to make
XFree86 work in its current state.
2000-02-26 18:53:10 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
3081e1deb7
Fix bogon discovered with LOCKDEBUG:
...
In msdosfs_hashget, final simple_lock() should have been simple_unlock().
2000-02-26 17:25:17 +00:00
6f1701b01c
Put a lock on the pcic, to serialize access to the chip during event
...
handling. This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
2000-02-26 17:24:44 +00:00
13fc260296
s/options\t/options \t/ for CONS_OVERRIDE line, so that addition/removal of
...
"#" does not affect indentation.
2000-02-26 17:12:37 +00:00
f2c822fa6e
Include <machine/cpu.h> to make these compile again.
2000-02-26 16:50:55 +00:00
6b56aad85e
more careful about AF on ctlinput. (saw panic in the past with kame/netbsd141)
2000-02-26 16:10:31 +00:00
6dd76ea8cf
don't touch non-AF_CCITT addrs on ctlinput. ctlinput routines can be
...
called from non-matching AFs. (saw panic by called with AF_INET6)
2000-02-26 16:03:23 +00:00
e0f169f58e
change power up sequence.
2000-02-26 15:16:19 +00:00
d4c8fabc4a
fix lost interrupt bug.
2000-02-26 15:14:19 +00:00
b4d8a2fd8f
Need <machine/cpu.h> for IIOV definition.
2000-02-26 14:31:35 +00:00
2c7ba046f0
with IPv4 AH, strip off AH from the packet. this is to make some
...
of IPv4 transport layer code work correctly (specifically, ICMPv4
will transmit wrong packet if we don't strip AH here)
this is just for m_pulldown case. normal installations are not affected.
2000-02-26 11:49:44 +00:00
546bda740f
Revert to using <bsd.prog.mk> again, so we support all targets that may
...
be presented when building the system (noticed by Juergen Hannken-Illjes).
2000-02-26 11:48:15 +00:00
99d909fc98
implement rip6_ctlinput, to cope with routing changes correctly.
...
(IMHO we need rip_ctlinput as well)
2000-02-26 09:09:17 +00:00
9c484862a0
make it possible to throw IPv6 packet with proto=4/41.
...
(in normal case we don't do it, but this is how IPv4 in_proto is written)
2000-02-26 09:01:59 +00:00
e40f8f1220
sync description on proxy NDP with latest KAME doc.
2000-02-26 08:49:49 +00:00
1450d6e643
bring in recent KAME changes (only important and stable ones, as usual).
...
- remove net.inet6.ip6.nd6_proxyall. introduce proxy NDP code works
just like "arp -s".
- revise source address selection.
be more careful about use of yet-to-be-valid addresses as source.
- as router, transmit ICMP6_DST_UNREACH_BEYONDSCOPE against out-of-scope
packet forwarding attempt.
- path MTU discovery takes care of routing header properly.
- be more strict about mbuf chain parsing.
2000-02-26 08:39:18 +00:00
beecfd4814
cnw is 8bit-only card. map memory region as 8bit only.
...
(there are so many 8bit-only card fixes. don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
52169104c5
Fill in the softc's bus space tag (OOPS!).
2000-02-26 05:11:27 +00:00
0b97eb1052
alpha_pa_access(): if securelevel <= 0, grant read/write access to
...
non-memory address locations.
2000-02-26 00:17:25 +00:00
bb4e324508
Fix pasto: some lines of the procfs hash code were copied from the
...
UFS code, and I forgot to rename the "ihash" variable, causing
weird effects, because 3/4th of the UFS hash table would become
unreachable after procfs was loaded as an LKM.
2000-02-25 22:33:43 +00:00
f8e1e12acc
Add Aviator/RayLink.
2000-02-25 20:55:34 +00:00
d1546a70bb
Add more PCMCIA stuff, nuke PNP.
2000-02-25 20:52:11 +00:00
78171a3a3e
I told them not to use IST_LEVEL here. Now PCMCIA works on my AS200. *sigh*
2000-02-25 20:48:22 +00:00
49f1a84ad6
Be even more careful about cleaning up the socket at boot time.
...
Also, nuke the windows when the socket is disabled. (They might be deallocated
and reallocated, and would thus cause a conflict.)
2000-02-25 20:45:43 +00:00
caa3932441
Minor cleanups. Remove extra debugging printouts.
2000-02-25 20:11:00 +00:00
89670eb646
Fix a bug introduced in Lite2 with block allocation and full disk
...
conditions. Reported by Ian Dowse <iedowse@maths.tcd.ie>, based
on patch in FreeBSD reviewed by Kirk McKusick.
2000-02-25 19:58:25 +00:00
21243f6205
- ignore the mod_counter when checking to see if a component fits with the
...
rest of an autoconfig set.
- minor cleanups
2000-02-25 19:56:56 +00:00
503220a18f
- ignore components whose mod_counter values are too low.
...
- noting the mod_counter for autoconfigured sets would be a win too.
2000-02-25 19:56:32 +00:00
ecf1c1eb21
Add auxiotwo (Tadpole 3GX aux 2 register) entry.
2000-02-25 18:24:40 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
7840960350
Driver for Tadpole 3GX "Power Down Control (Aux 2) Register".
...
Based on existing auxreg.[ch] (Sparc Aux Register driver).
2000-02-25 18:17:24 +00:00
2fd2b78c1f
Only call the cursor method when the cursor state is actually changing.
...
This avoid corrupting VGA displays in text mode (e.g. the first character
of the prompt when you exit vi).
2000-02-25 17:42:51 +00:00
8d63540a8c
When we close autoconfigured components, we need to note that they
...
are no longer in 'autoconfigured' status.
2000-02-25 17:14:18 +00:00
9bbc61deaa
We need <bsd.obj.mk>.
2000-02-25 16:53:22 +00:00
c64db6cec7
Remove out-dated comment.
2000-02-25 16:02:49 +00:00
59ebd61fdf
Do not hardcode ethernet address.
...
This haven't tested with original Acer Pica 61, but it appeared that
NEC Image RISCstation is almost fully compatible with Pica 61, and
doesn't have problem with using product id as ethernet address.
(Although it is better to use SONIC device configuration data from ARC BIOS,
rather than product id. Autoconfiguration stuff for jazz derived systems
really should be revisited.)
2000-02-25 13:28:42 +00:00
0e123969af
some clean up, especially,
...
- use "objcopy -O ecoff-littlemips" instead of elf2ecoff to make cross
compilation easy. this also workarounds a problem that -current
elf2ecoff doesn't work with ARC BIOS.
- use -mips2 for ld, since mixing -mips3 and -mips2 doesn't work with
-current ld.
mostly from Izumi Tsutsui <tsutsui@netbsd.org>
2000-02-25 13:20:43 +00:00
2d3ab1ef0c
stop memory probing at first memory image.
...
this is necessary for MC-CS12.
2000-02-25 11:20:20 +00:00
469464d4c8
add forward declaration of "struct extent", so the extent header doesn't
...
need to be included
2000-02-25 10:33:12 +00:00
0ff2be2565
-make lm78 entry depend on NLM
...
-add "vmegeneric" entry (the driver is not yet there, but I'm sick of
the cvs conflicts)
2000-02-25 10:04:38 +00:00
8ca8b4955d
lm needs-flag
2000-02-25 10:02:13 +00:00
c1e70a6c0a
allow AF_UNSPEC for SIOCDIFADDR. ISC DHCP client depends on this behavior.
2000-02-25 08:51:35 +00:00
abf6ccac96
backout previous commit (sanity check for family) - it seems to be doing
...
something wrong. i'll revise it soon.
2000-02-25 08:37:05 +00:00
de1fd6178d
sync with latest KAME document.
...
- updates in I-D/RFC #
- scoped address syntax change
- remove ALTQ and other portion to avoid confusion
2000-02-25 07:29:47 +00:00
3c0960474d
reject non-AF_INET addresses on ioctl.
...
without this, we can configure invalid sockaddrs, for example,
sa_family == 0 (and we can never remove them!)
2000-02-25 07:11:38 +00:00
54ffe9e871
Only pay attention to controller 1 on the pcic. It appears that on this
...
machine it mirrors (but is not usable as) controller 0.
XXX Need to find a way to detect this automatically.
2000-02-25 05:28:42 +00:00
7dbe5be481
Disable all windows at boot time, to avoid conflicts when reading the CIS.
...
Also, GC a small bit of code that's inaccesible after the previous change.
2000-02-25 05:26:17 +00:00
8f5a83e6e9
on SIOCS*_IN6, validate sockaddrs so that we never configure non-AF_INET6
...
addresses. (in_control has the same problem - I'll need to check it as well)
obsolete the following two ioctls, they do not fit well against IPv6 addressing
model. (the kernel support them for some period of time, we'll remove them
in the near future)
SIOCSIFDSTADDR_IN6
SIOCSIFNETMASK_IN6
2000-02-25 05:13:05 +00:00
ac4c520f05
If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we
...
don't try to use the socket any further. (This will only happen if the user
explicitly unconfigured some of the sockets.)
2000-02-25 04:24:37 +00:00
d142237f2a
clear m_pkthdr for M_PKTHDR mbuf, so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
why does the code allocate mbuf by its own?
2000-02-25 03:41:54 +00:00
1ccb9e8170
when change mbuf type, clear m_pkthdr so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance? it comes with code duplicate/synchronization problem with
sys/mbuf.h...
2000-02-25 03:39:13 +00:00
01ef320ff1
Add `\My Documents\' to the menu of kernel locations.
2000-02-25 03:38:59 +00:00
a4f7f062fd
- cleanup raidinit()
...
- cleanup rf_mountroot_hooks()
- various other cleanups.
2000-02-25 02:42:30 +00:00
5716b5d6d1
Be *slightly* more consistent about the use of num and numraid in raidattach().
2000-02-25 02:21:12 +00:00
f5f2ad429c
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and
...
pnpbios attach.
examples:
lm0 at pnpbios0 index?
lm0 at isa? port 0x290
TODO: spinlocks, i2c interface.
2000-02-25 02:17:43 +00:00
e4e4483cb7
Fix a (slightly) bogus status message.
2000-02-25 02:06:34 +00:00
3dacaa322d
Protect a few things from userland with _KERNEL.
2000-02-25 01:16:41 +00:00
de974ff82d
Add an internal bus space method alpha_bus_space_translate(), which
...
provides a method to translate an address on an I/O bus into a sysBus
address, along with acccess method information.
2000-02-25 00:45:04 +00:00
108b65903a
Fix an obscure bug:
...
If we enter DDB from the keyboard, kc_scandata[] wasn't updated before the
debugger was entered, and the first call to cngetc() would see the ESC and
stack another DDB entry on top. This was... poor.
2000-02-25 00:42:47 +00:00
eecf64392b
remove unnecessary if - else clause.
...
(sync with kame)
2000-02-25 00:29:55 +00:00
1bb987a022
remove extra NULL check
...
typo in PULLDOWN_TEST case
note: the fixes does not affect normal configuration.
(sync with kame)
2000-02-25 00:29:00 +00:00
857bdcba78
make variable initialization safer.
...
(IP6_EXTHDR_CHECK can call m_pullup under rare condition)
2000-02-25 00:27:18 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
bdd659fc7f
Deal with unconfiguring components in the autoconfigure case.
2000-02-24 23:39:21 +00:00
a84d573e15
KZ-SH4-01 (Kyoto Micro Computer Co.,LTD)
2000-02-24 23:33:59 +00:00
6e7f2e9779
SH4!
2000-02-24 23:32:26 +00:00
71b18d9041
Make it easier to cross-compile with this.
2000-02-24 21:59:13 +00:00
da0ae51fcf
variable start address of the main memory (now we can use
...
the area 2 as main memory with "options IOM_RAM_BEGIN=0x88000000")
2000-02-24 19:42:35 +00:00
7ae4a95c4d
multiple interrputs!!!
2000-02-24 19:01:24 +00:00
815f93520f
- Attach dpt0 to the isa bus. Commented out since (a) at any valid address it
...
conflicts with too much other stuff (b) if I UTSLed correctly, EISA boards
may be picked up at an "ISA address and an EISA address" - I don't have
enough info on this yet to fix it (c) a DPT HBA at an address usually
assigned to wdc0/1 may get detected as a WD100x controller. Some of them can
emulate a WD100x controller, but the one I tested with doesn't.
- Sync with GENERIC just a little.
2000-02-24 18:49:40 +00:00
28fc2b2ee8
Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some
...
issues.
2000-02-24 18:49:06 +00:00
50062f0914
- Don't use bitfields.
...
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
2000-02-24 18:47:55 +00:00
3559e78ed2
include <machine/endian.h>
2000-02-24 17:19:57 +00:00
dddc24af60
G.C.
2000-02-24 17:18:30 +00:00
aea97a5a17
Oops... Missed commmitting this last night. Thanks to Matthias Scheler
...
for letting me know.
(Add the DiskQueueSW pointer)
2000-02-24 17:12:10 +00:00
f51b1c6783
add RCSID and copyright
2000-02-24 17:10:16 +00:00
e2cc2d00d7
watchdog timer
2000-02-24 17:07:34 +00:00
0e12305a13
global variable declaration
2000-02-24 16:42:54 +00:00
3d97823234
remove never-referenced variable (in6_interfaces).
...
fix paren match for macro.
2000-02-24 12:59:12 +00:00
95db252b5c
costmetic (remove space at EOL)
2000-02-24 12:43:49 +00:00
729dcf0da4
hide declaration of IP6_EXTHDR_{GET,CHECK} from userland.
2000-02-24 09:55:24 +00:00
6a1af46504
don't transmit ICMPv4 packet back, if the original packet was encyrpted.
2000-02-24 09:54:49 +00:00
d67bf4504d
Turn off some noise during autoconfig on the IIfx/Q9x0, making it
...
conditional on the TRACE_CONFIG debugging flag.
2000-02-24 05:02:33 +00:00
e644abfe94
Make sure we close auto-configured components appropriately when
...
attempting a rebuild-in-place.
2000-02-24 04:39:41 +00:00
c5961cfba3
Garbage collect some unused stuff. Include rf_kintf.h for a
...
function prototype.
2000-02-24 03:52:15 +00:00
851a2cdcd8
- record the pointer to the DiskQueueSW so we can use that when
...
we hot-add a spare.
- use the above info when adding a spare.
2000-02-24 03:48:41 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
9e81bc058e
Now that we have the information available, use the general maxOutstanding
...
value for the RAID set, rather than looking at Queue[0][0] (which may not
exist).
2000-02-24 02:55:05 +00:00
99f070bab8
- mod_counter needs to get incremented more often.
...
- use raid_init_component_labels instead of hand-rolling a component_label.
(missed doing this for the rf_used_spare case when updating component labels).
- fix serial number initialization in raid_init_component_labels
2000-02-24 01:23:05 +00:00
fb13ce76fc
- make sure we note the parity status in the autoconfig case.
...
- also, make sure we grab the serial number from the component labels
when we autoconfig.
2000-02-24 01:22:32 +00:00
e0c3daee1d
remove PMAP_NEW
2000-02-23 21:14:12 +00:00
98fa781c83
The check for 'rz(?,?,?)' was incorrect and would not find the boot device
...
on the 3100.
2000-02-23 18:50:51 +00:00
df1f794536
Reflect version 1.13 of i82365_isa.c. Untested.
2000-02-23 17:22:11 +00:00
e48c624741
Loading the exception return PC in k0 before restoring the status register
...
(which disables the interrupts) is *not* a good idea. k0 (and k1) is used
by the kernel code such as the TLB miss handler, and the interrupt entry.
If an interrupt occurs after loading k0 and before the SR gets interrupts
disabled, k0 will be clobbered and when used to load the PC on exit from
the exception handler, results in various hangs and crashes.
2000-02-23 17:04:06 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
d91ecfbcfd
Be more aggressive about updating component labels in the event
...
of a real component failure (or a simulated failure):
- add 'numNewFailures' to keep track of the number of disk failures
since mod_counter was last updated for each component label.
- make sure we call rf_update_component_labels() upon any component failure,
real or simulated.
2000-02-23 03:44:02 +00:00
6ac2d6c797
For pfil_add_hook(..., PFIL_ALL, ...), if we fail to add the output filter,
...
make sure to remove the input filter.
2000-02-23 02:35:42 +00:00
e7f3dc2ec9
blockSize for the component label is already set correctly here.
2000-02-23 02:11:05 +00:00
0c43bf18f0
- cleanup of more component label code
...
- make current default label values available everywhere
- make sure numBlocks and blockSize in component labels get initialized
for all component labels
- check for component size to be smaller than or equal to the partition size
when autoconfiguring
2000-02-23 02:04:21 +00:00
6aaac32240
Do a better job of (re)initializing the component labels after
...
a reconstruct or a copyback.
2000-02-23 02:03:03 +00:00
d84e4ed019
Make a note of autoconfigured components.
2000-02-23 02:01:55 +00:00
e0ab2f3d0f
Correct a comment.
2000-02-23 00:37:11 +00:00
214822e08c
Note the fact that the first arg of raidinit() may be bogus in
...
the autoconfig case (the value of the first arg never gets used, but...).
2000-02-22 23:13:15 +00:00
9651e60835
Fix typos in my last commit that caused the driver to panic.
...
Change some (unrelated) debug messages.
2000-02-22 22:59:49 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
dcfbcbec76
remove bogus debug (was reading unmapped CCR)
2000-02-22 21:29:36 +00:00
08ef0cfe07
revert previous change
2000-02-22 21:09:50 +00:00
64fa8aa0d6
remove SES driver
2000-02-22 17:43:57 +00:00
3bc7b845f7
Make this file possible to use again.
2000-02-22 16:36:29 +00:00
e8ff7f6155
Bounds-check the 'last unit' a little more closely.
2000-02-22 16:07:02 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
009856b631
Save and restore a couple ofregisters in the power hook in case BIOS doesn't.
2000-02-22 16:03:42 +00:00
db8aeddb5f
deal with bios that just say end tag with no end dep
...
add a lot of skeletal work to pnpbios.
option to handle events from pnpbios in a thread (e.g., hot-doc)
add calls for the other pnpbios functions (e.g., send message etc..)
add most defintions from the pnp doc to new reg file
2000-02-22 15:49:17 +00:00
b0b40b6c34
Make this compile after the netisr_dispatch change.
2000-02-22 15:43:54 +00:00
ed0b97c110
* Add more OS ABI constants and dynamic array tags from D1998-04-29.
...
* Enhance readibility: define data structures first, followed member value
constants, and add more comments.
2000-02-22 13:57:23 +00:00
d7e9d324f9
reflect recent <mips/types.h>: mips is now vm_offset_t/vm_size_t clean
2000-02-22 12:29:56 +00:00
6ff57360cc
mips is now vm_offset_t/vm_size_t clean
2000-02-22 12:28:25 +00:00
9e16037265
Simplify the attach routine a bit.
2000-02-22 12:24:53 +00:00
9051f8102e
clean up vm_{offset,size}_t, use {v,p}{addr,size}_t instead
2000-02-22 12:22:19 +00:00
ea30c06e0e
remove commented out ``ident "GENERIC-..."'', since this file is not GENERIC.
2000-02-22 12:17:52 +00:00
b4e291e818
Fix some off-by-one errors; patch from Jonathan O'Brien.
2000-02-22 12:12:21 +00:00
4ad26273c2
rd -> md
2000-02-22 11:40:20 +00:00
e9423d1a30
this file belongs to arc/include on NetBSD.
2000-02-22 11:32:23 +00:00
9056664327
Prepare a little for having USB interrupt processing done outside the hard
...
interrupt level (in a thread or a softintr).
No real soft processing done yet.
2000-02-22 11:30:54 +00:00
fdf401f582
only call pfil_list_add with one of PFIL_IN or PFIL_OUT defined
2000-02-22 11:30:22 +00:00
71f6ef9ee6
merge changes between OpenBSD-2.1 and OpenBSD-2.6
2000-02-22 11:25:55 +00:00
6cc37002ad
Fix (mostly harmless) typo.
2000-02-22 11:25:06 +00:00
2eda3cf829
Better debug info.
2000-02-22 11:24:22 +00:00
87009692f7
OpenBSD-2.6/arc
2000-02-22 11:05:02 +00:00
d33119108e
Add OS ABI constants from the 1998-04-29 draft.
2000-02-22 10:49:19 +00:00
81069f7a58
return int from pfil_add_hook and pfil_remove_hook to indicate failure
...
or success, rather than panic'ing
2000-02-22 10:45:47 +00:00
4da6dd2324
fix from Mike Pelley to add filters in the reverse order for output
...
compared with input.
2000-02-22 10:18:49 +00:00
bfaa657135
Fix printf formats on the Alpha.
2000-02-22 08:23:22 +00:00
ef5d25c147
use bios' idea of the basemem size and create the kernel stack
...
at the top of it instead of hard coding 0x90000
2000-02-22 07:45:04 +00:00
7a91879a6d
delete warning.
2000-02-22 04:11:24 +00:00
fb56415023
Add a few comments, and an indicator of whether or not an autoconfig set
...
is 'rootable'.
2000-02-22 03:39:47 +00:00
bd2230fd09
- implement additional component checking before autoconfiguration
...
- make component label setting work again(!!!!)
2000-02-22 03:38:42 +00:00
32f100250f
Cosmetic changes.
2000-02-22 02:38:26 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
58369df4e9
Fix the bug which cause invalid slot exception under SH4.
...
This exception doesn't occurs under SH3
2000-02-22 02:17:05 +00:00
c02e68b1f5
calculate checksum correctly
2000-02-22 02:14:16 +00:00
c956cdcabe
bugfixes:
...
o SCI accesses SCI registers (not SCIF) correctly
o If there is serial inputs in boot time, it could hangup in interrupt routine
o some cleanups(KNF)
2000-02-22 01:37:11 +00:00
afccbaa6d7
Umm.. let's set 'numraid' to something useful before we try to use it.
2000-02-21 23:33:45 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
6ac8255360
This is a fragment of the network soft interrupt routine in MD code. DONETISR should be defined to do the appropriate thing for each port before including this. This file is to keep the available NETISRs the same across all ports.
2000-02-21 20:36:14 +00:00
fa88d200cf
Remove NETISR_IMP. Make NETISR_ARP == AF_ARP, renumber NETISR_PPP to allow this.
2000-02-21 20:31:02 +00:00
8f2d14fbd1
added wmesg argument to pcic_delay debug printout
2000-02-21 20:16:22 +00:00
f4f446cf2c
include dev/isa/isareg.h instead of redefining IOM_BEGIN, IOM_END
...
and IOM_SIZE for ISA memory mapping kludge
2000-02-21 20:06:08 +00:00
7f44584598
clen up some error messages
2000-02-21 19:18:53 +00:00
77292e79c6
fix a couple of things to handle interrupts more cleanly on the A1200
2000-02-21 18:27:49 +00:00
dd6a9d86b0
SUN_BOOTPARAM compile-time option is no longer used.
2000-02-21 15:13:11 +00:00
f89828d99f
bootxx links at 0x340000
...
2nd-stage boot programs choices: 0x200000,0x300000,0x400000,0x700000 (default: 0x300000)
2000-02-21 15:07:32 +00:00
ea0dbfe79c
RELOC -> RELOC_DEFAULT
2000-02-21 14:44:18 +00:00
8305907589
Build several versions of the second-stage boot program, each linked
...
to run at a different base address. Boot image build procedures can
pick one which is least likely to fail..
The default boot program is again build to run at 0x340000.
2000-02-21 14:41:22 +00:00
26f41e8f13
support non-contiguous memory.
...
patch from Mycroft <root@ihack.net> and uch@netbsd.org .
tested hardware:
VR4121 IBM WorkPad z50 (48MB, 16MB)
VR4121 NEC Mobile Gear II MC/R730
TX3912 Compaq C-series 810 (20MB), 2010c (20MB, 16MB)
TX3922 Sharp Telios HC-AJ2 (32MB)
2000-02-21 13:46:02 +00:00
3c0d53280b
Fix scsi.pmax inclusion mistakenly commented out.
2000-02-21 06:44:24 +00:00
5bc9da0d51
Correct some temporary confusion between the IOPs and the OSS: move
...
IOP init back to mac68k_init(). We'll deal with the OSS later.
2000-02-21 05:50:14 +00:00
ec2327108e
On MP, print cpu number prior to prompt
2000-02-21 05:48:56 +00:00
45ac4c3122
Use constants defined in viareg.h to set value of VIA2.
2000-02-21 05:36:11 +00:00
296fbeed2a
Patches from msouth@scruz.net to handle QIC 3220 (HP T20).
2000-02-21 05:11:09 +00:00
17a313075f
Correct some temporary confusion between the IOPs and the OSS: move
...
IOP init back to mac68k_init(). We'll deal with the OSS later.
2000-02-21 04:08:21 +00:00
158df7b6f1
Don't establish an interrupt if attach is in progress. Anyway, current wdc
...
and its children doesn't require interrupt on attach.
2000-02-21 03:55:22 +00:00
91026fe7f2
Cosmetic changes.
2000-02-21 03:26:41 +00:00
5c7674d4dd
Explicitly include headers needed by iopreg.h
2000-02-21 02:04:48 +00:00
6ba0786ed1
several fixes:
...
1. in pmap_steal_ptp(), don't trylock the pmap that wants a ptp,
the caller already has it locked.
2. do not panic in pmap_enter() due to memory allocation failures when
the PMAP_CANFAIL flag is given. to this end, move all such panics
from the lower-level routines to pmap_enter() and pmap_growkernel()
where we can check for this flag.
3. add #ifdef DIAGNOSTIC around all panics which are only reachable
if there's a bug or a hardware error.
2000-02-21 02:01:24 +00:00
eb17197dee
Initialize VIA/IOP/PSC from intr_init(). While here, re-order headers
...
to match KNF.
2000-02-21 01:51:37 +00:00
806c8c15e0
Initialize VIA/IOP/PSC from intr_init().
2000-02-21 01:48:49 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
ab647533a1
Bracket disabled IIfx IOP code with #ifdef __notyet__, rather than
...
commenting it out or using #if 0.
2000-02-21 01:20:55 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
024d345241
Add ability to customize I/O region and DAC offset based on pnpbios idstr.
...
Add CSC0000 id from Dell Latitude CPi.
2000-02-20 22:03:49 +00:00
7fffbf8679
Add a few links to documentation.
2000-02-20 21:42:26 +00:00
a3a129e6f5
Oops...I forgot that the GEM-2 chip is so lame that if you don't tell
...
it exactly the right amount of data to transfer for WRITE BUFFER/Global
it will stay stuck in command phase (causing a command phase overrun).
2000-02-20 21:30:44 +00:00
cd14e5fa0c
Add a fifth "divisor" argument to humanize_number; suitable values are
...
either 1024 or 1000.
Needed because frequencies use decimal rather than power-of-two SI
prefixes.
2000-02-20 19:32:28 +00:00
077b93be1a
According to Takeshi Nakayama <tn@catvmics.ne.jp>,
...
POW_ALARMSW seems always 1 on some models (at least XVI).
2000-02-20 16:18:51 +00:00
5f0b3b1510
usbd_devinfo_vp(): search the know devs array also if the device
...
doesn't return product description (e.g. Kye's Genius NetScroll
mouse returns vendor, but not product); the strings
returned by device are still preferred to those in the array, though
2000-02-20 14:45:05 +00:00
6b93b03665
regen
2000-02-20 14:39:28 +00:00
e710e0dfa1
Add Kye's Genius NetScroll mouse
...
XXX Should the name be just "NetScroll mouse" ? Kye seems to be manufacturer
XXX for the mouse licenced from Genius.
2000-02-20 14:37:48 +00:00
1c4521f1da
add ses.h to list of includes
2000-02-20 07:39:41 +00:00
c5f8d33f85
minor spelling change
2000-02-20 07:38:48 +00:00
1515bd47fc
remove obsoleted #if defined(UVM)
2000-02-20 06:34:46 +00:00
6779fc2bb2
Fix thinko in previous commit.
2000-02-20 03:48:40 +00:00
ac75116d32
Try other config entry on i/o space alloc failure.
2000-02-20 03:18:15 +00:00
4b3916780b
pass "struct pfil_head *" to pfil_add_hook and pfil_remove hook rather
...
than "struct protosw *".
2000-02-20 00:56:33 +00:00
0e4b23600f
handle a NULL "done" pointer.
...
for the userspace versions, return EFAULT instead of EACCES
when the user address is bogus.
2000-02-19 23:29:16 +00:00
db71aa588d
s/u_char/u_int8_t/ for sin6_{family,len}
2000-02-19 17:32:07 +00:00
728c720d75
acknowledge the interrupt to gayle before entering wdc_intr.
...
This fixes the lost interrupts problem.
fix some glitches on the A1200 too.
2000-02-19 17:16:20 +00:00
6f13498242
correct oops on last checkin
2000-02-19 15:13:07 +00:00
fa120e391e
On [port-hpcmips-ja@jp.netbsd.org:1764]
...
suz@hpc.bs1.fc.nec.co.jp (Koji Suzuki) writes
Sample configration for cassipeia E-55 & E-500
// wdc1 line deleted from original.
2000-02-19 15:01:33 +00:00
49fb5cf837
one more - Windows 2000 NTFS support
2000-02-19 14:42:21 +00:00
977705bc43
sort filenames, mainly to sort ip6/ipsec entries.
...
requested by: matthew green <mrg@eterna.com.au>
2000-02-19 10:31:07 +00:00
e6635ea8bd
Introduce MI SCSI codes; for DECstation 5000s only this moment.
2000-02-19 09:48:46 +00:00
051314999f
Introduce MI SCSI codes; for DECstation 5000s only this moment.
...
Disabled by default and needs arrangements in conf file to use it.
See DS5000 as a sample.
2000-02-19 09:46:48 +00:00
58d5093220
Introduce MI SCSI codes; for DECstation 5000s only this moment and
...
disabled by default.
2000-02-19 09:43:40 +00:00
7f0554e0c9
Add some CONSTCONDs to make lint happier.
2000-02-19 09:23:44 +00:00
09cc3151e6
Don't pull in cpu.h in non-kernel code.
2000-02-19 09:22:51 +00:00
fb5d3e9da4
Enable DDB history.
2000-02-19 06:58:28 +00:00
da782dba95
The way to determine booted root device was simplified largely.
2000-02-19 04:16:18 +00:00
6fe5b35136
Don't print an extra cpu0: prefix.
2000-02-19 04:00:59 +00:00
14ef93565d
Use the prefix printed before cpuattach() is called.
2000-02-19 03:59:04 +00:00
02d328f925
List all 6 different types of MI SCSI device.
2000-02-19 03:58:23 +00:00
fb7bc58609
Add new SUBDIRs.
2000-02-19 02:03:29 +00:00
b4f04eeaad
Disable the sN,sp,gp register restore code for now, as it seems to collide with
...
something else.
2000-02-19 01:56:21 +00:00
a9697ee5f2
Handle > 12 byte CDBs.
2000-02-19 01:55:42 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
d88aecac57
Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was
...
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
2000-02-19 01:53:56 +00:00
ff86abe827
Cleanup some printaouts.
2000-02-19 01:51:43 +00:00
b6dd4ddacf
Add in ISP_SWIZZLE_CONTINUATION macro.
2000-02-19 01:51:21 +00:00
8c2e6c73e3
Handle dual bus cases for immediate notify and enable lun commands.
2000-02-19 01:50:57 +00:00
98f7f7b5a0
Fix ITDEBUG macro
2000-02-19 01:50:25 +00:00
77dec43b22
Clarify cd_resid tag.
2000-02-19 01:50:03 +00:00
8405ee3752
Add in some mbox return codes that define when we've used up target
...
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
2000-02-19 01:49:47 +00:00
6df4ed6f4d
Fix resettod() from Richard Earnshaw <rearnsha@arm.com>
2000-02-19 00:27:16 +00:00
6cf82b4102
Sync with CATS.
2000-02-19 00:17:59 +00:00
7f54ebdd6b
- enable adv, pcscp, ex, vr and sequencer (which I am/was using)
...
- add (commented out) ne[01] at isa? (working)
- add (commented out) file-system CODA
- add (commented out) mpu* at sb? and midi* at mpu? (untested)
- comment out faith (sync with GENERIC)
- some more cosmetics
2000-02-19 00:14:58 +00:00
e7cfaf8f5b
Actually, it looks like the mouse is there.
2000-02-18 23:11:20 +00:00
640bdcd6cf
Document some things that are missing.
2000-02-18 23:10:01 +00:00
f1d350ea27
Somewhat scaled-down config for a WorkPad.
...
Uses WSEMUL_SUN so I can get multi-line scrolling.
2000-02-18 20:52:15 +00:00
d282f771e7
Remove redundant CIS definitions.
2000-02-18 18:55:31 +00:00
bb7c9c63f3
On exception return, use k1 to restore the saved registers, so that we
...
don't stomp on the return address in k0. Also, don't need to account
for any load delays, as the last register restored (gp) isn't used in
the subsequent instruction.
2000-02-18 18:36:41 +00:00
7481db1957
Revert the removal 'include "dev/scsipi/files.scsipi"' directive; it's
...
neccessary to make pmax/conf.c compiled correctly.
2000-02-18 10:18:12 +00:00
e7edda84b7
Remove vmparam.h.
2000-02-18 08:50:25 +00:00
eb30f016ae
Group and reorder old SCSI driver descriptions into a single
...
location. Nuke files.scsipi inclusion which has never been useful.
2000-02-18 08:41:21 +00:00
fec6c976f3
Make the z50 tab key work.
2000-02-18 06:54:47 +00:00
3e02ded337
Improvement on SFB enabled copycol(); still yet under development,
...
it miserably fails on corner cases.
2000-02-18 06:51:51 +00:00
83176f3b3c
fix alignment problem in ancillary messages (alpha).
...
the change constitutes binary compatibility issue hen sizeof(long) !=4.
there's no way to be backward compatible, and only guys affected
are IPv6 userland tools.
From: =?iso-8859-1?Q?G=F6ran_Bengtson?= <goeran@cdg.chalmers.se>
2000-02-18 05:19:23 +00:00
c9f3b6ba01
Adjust previous change for R3000 load delay slot.
2000-02-18 03:46:43 +00:00
71979ea6fb
Make the MIPS1 and MIPS3 code more similar.
...
XXX Needs testing on MIPS1.
2000-02-18 00:15:15 +00:00
9e77fba716
Take a whack at allowing sN, sp and gp to be set from DDB, too.
2000-02-18 00:02:43 +00:00
3ade108e4b
Allow vN, aN, tN, ra, sr, mul[lo,hi] and pc to be set from DDB. sN requires
...
more work.
2000-02-17 23:52:23 +00:00
c41cbbb8b7
Fix obvious typo.
2000-02-17 22:16:31 +00:00
a00eb27e1a
More 802.11 subtypes: there's also 1MB/s DS
...
(the BayStack 660 firmware claims to support it).
2000-02-17 21:53:16 +00:00
760d110b96
Regen.
2000-02-17 21:31:39 +00:00
b95959c4c8
Give platid_name_table_size a type.
2000-02-17 21:31:13 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
6fa8665eeb
Handle detach that happens before attach has finished. (Reported by mycroft.)
2000-02-17 18:42:21 +00:00
50c84950f2
awi: rewrite to be higher performance.
2000-02-17 17:37:23 +00:00
1955c335af
Regen.
2000-02-17 16:30:44 +00:00
536b31a5c8
Add Sony PCGA-UMS1 mouse.
2000-02-17 16:30:11 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
7ff31fc326
Update patch from Witold Wnuk in PR 9335 to solve potential security
...
issue noted by tls.
2000-02-17 12:34:26 +00:00
12636d3570
bump __NetBSD_Version__ due to change in protosw for pfil
2000-02-17 11:41:59 +00:00
a156f44da6
bump __NetBSD_Version__ due to change in protosw for pfil
2000-02-17 11:01:20 +00:00
fd7edad6c3
Change the use of pfil hooks. There is no longer a single list of all
...
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
2000-02-17 10:59:32 +00:00
f7ad1af2b5
Use bpf_mtap() correctly.
2000-02-17 05:41:41 +00:00
de10c7425e
backout incomplete hack from KAME codebase (originally from bbn).
...
the hack tries to respect ifa or ifp passed to RTM_ADD. However, the change
broke certain link-layers. They include:
- midway ethernet card (en*), which uses sockaddr_dl in gateway portion
to pass PVC information. with the patch, the gateway portion will be
overwritten by empty sockaddr_dl and PVC initialization will fail.
- IPv6, which can't set static ND table with the patch (ndp -s), for the
similar reason as above.
There may be improved hack coming soon, hope the new one does not break others.
2000-02-17 04:28:00 +00:00
f30d8c9d30
Include mac68k/dev/akbdmap.h, not macppc/dev/akbdmap.h. Fixes PR 9435
...
filed by Dave Huang <khym@bga.com>.
2000-02-17 02:07:07 +00:00
d87b838524
Fix TMASK to use all 5 lower bits of the media word, and add HomePNA 1.0.
2000-02-16 18:03:14 +00:00
1da0c062ce
Make sure access of ssir atomic. (from luna68k)
2000-02-16 15:32:03 +00:00
a6343f76db
Unused. (PR 9424)
2000-02-16 14:02:13 +00:00
729f693364
- if ip_dst matches address on !IFF_UP interface, and
...
- there's no match against addresses on IFF_UP interface,
send icmp unreach if I'm router. drop it if I'm host.
Revised version of PR: 9387 from nrt@iij.ad.jp . Discussed with thorpej+nrt.
2000-02-16 12:40:40 +00:00
791a70292c
correct ratecheck() signedness. without this fix, ratecheck() will never
...
success again after first success with lasttime=(0,0).
2000-02-16 12:36:19 +00:00
c13f6dd258
Introduce a sysctl to enable/disable if non-root users can mount filesystems.
...
Default: off.
2000-02-16 11:57:45 +00:00
c59358ebde
Add sysctl type for "usermount".
2000-02-16 11:57:00 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
7deba340d7
Some of these function names are bad enough that no one else would probably
...
pick them, but preface them with rf_ anyway.
2000-02-16 01:10:44 +00:00
b178e1f58c
Add support for rate-limiting RSTs sent in response to no socket for
...
an incoming packet. Default minimum interval is 10ms. The interval
is changeable via the "net.inet.tcp.rstratelimit" sysctl variable.
2000-02-15 19:54:11 +00:00
971144c47f
Add ess at pnpbios
2000-02-15 17:14:50 +00:00
558d216998
Add pnpbios front end for ESS AudioDrive.
2000-02-15 17:12:54 +00:00
52014b23c5
Allow second-stage boot program to be specified on the command line.
2000-02-15 16:15:07 +00:00
59742052ea
Determine base address at run time.
2000-02-15 14:09:59 +00:00
9bb753bb2e
Nuke unused code.
2000-02-15 12:18:05 +00:00
141900755f
Nuke the local outc() since the prototype for the second argument of tputs()
...
now matches putchar().
2000-02-15 10:14:55 +00:00
8d6a7f1861
Grabage collect a 'struct buf *' left over from recent disksort changes.
2000-02-15 09:00:07 +00:00
f3b975e9a4
Add ICMP error rate limiting, based on the same for ICMP6.
...
Note, we're reusing the previously unused slot for "MTU discovery" (which
was moved to the "net.inet.ip" branch of the sysctl tree quite some time
ago).
2000-02-15 04:03:49 +00:00
800897b12f
make assumption on mbuf explicit (m->m_len >= sizeof (struct ip)).
2000-02-15 00:42:22 +00:00
d2bccc29d8
Fix a couple of brainos in the last.
2000-02-15 00:31:08 +00:00
4a1320b29f
Put the entry of FNW-3700T after the entry of SVEC-PN650TX
...
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-02-14 23:13:49 +00:00
fe39281ea4
Fixes to the softdep code from Ethan Solomita <ethan@geocast.com>.
...
* Fix buffer ordering when it has dependencies.
* Alleviate memory problems.
* Deal with some recursive vnode locks (sigh).
* Fix other bugs.
2000-02-14 22:00:21 +00:00
fd8c03cf44
Allow arch-specific code to specify in4_cksum() like it can specify
...
in_cksum().
2000-02-14 21:42:50 +00:00
15c201069b
Change ratecap to its presumably intended type of struct timeval.
2000-02-14 21:17:04 +00:00
b223c00cee
Avoid linker error if no PHY is attached.
2000-02-14 20:29:54 +00:00
a90153e264
enlarge the initial kernel page table - needed for some 128 MB machine
2000-02-14 20:23:20 +00:00
445e42d77a
One small piece from UBC: create a pool for I/O buffers. One small piece
...
not from UBC: make physio use it instead of its own home-grown thing.
2000-02-14 20:12:02 +00:00
144759ef2b
Use ratecheck() for ICMP6 rate limiting.
2000-02-14 19:45:50 +00:00
2649d26c0e
Use ratecheck().
2000-02-14 19:28:19 +00:00
72252544f5
remove `flags' from sun4 zs declarations; the driver doesn't use it.
2000-02-14 18:08:38 +00:00
5b285d9509
Just skip matching the `slave' property against `cf_unit'.
2000-02-14 18:07:37 +00:00
1d373a94e2
Bump receive buffer size up to the maximum DMA burst boundary.
2000-02-14 17:14:28 +00:00
a1b5434cec
Make promiscuous mode go again.
2000-02-14 17:06:45 +00:00
0b8b55beaf
Add uninorth. Now iMac DV and Power Macintosh G4 should run NetBSD.
2000-02-14 14:57:52 +00:00
2750c23cdd
Add minimal support of openpic.
2000-02-14 12:45:52 +00:00
085f44145c
- Be more strict in status check before sending a command (make sure
...
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
of the problem is that the drive is unresponsive just after a reset.
The real problem (and the solution) showed up after the first change.
2000-02-14 12:37:35 +00:00
042be92f6f
Update for wscons.
2000-02-14 08:58:41 +00:00
2071e61796
Update for wscons.
2000-02-14 08:48:08 +00:00
14af97fa26
add Sharp HC-1200
2000-02-14 07:22:19 +00:00
2d09174cce
regen.
2000-02-14 07:19:25 +00:00
8a00740789
Merge wscons work onto the main development branch.
2000-02-14 07:01:44 +00:00
f009580118
add Sharp HC-1200
2000-02-14 06:55:36 +00:00
9558d7b27b
Regen.
2000-02-13 23:10:22 +00:00
a39279da39
Add a bunch of devices.
2000-02-13 23:10:02 +00:00
2aafd71ec7
Reduce NKMEMPAGES_MAX_DEFAULT.
2000-02-13 17:01:47 +00:00
520d8c032e
Waked up from the dead
2000-02-13 13:01:14 +00:00
90fe757934
Fix typo in comment.
2000-02-13 10:25:07 +00:00
99b18eac36
on attach, check if we've got meaningful mac address or not,
...
to detect io mapping problem.
on detach, handle resource deallocations more carefully.
2000-02-13 06:17:58 +00:00
2a3b53a229
Remove __BROKEN_CONFIG_UNIT_USAGE.
...
This has been fixed on news1200 merge.
2000-02-13 05:40:36 +00:00
068fcab81e
Enable rl ethernet device.
...
General tidy up.
2000-02-13 05:26:04 +00:00
f43601877b
Remove __BROKEN_CONFIG_UNIT_USAGE.
2000-02-13 05:20:45 +00:00
d97d3dc6a5
Enable rl ethernet device and do some general cleaning up.
2000-02-13 05:19:40 +00:00
7ef62e2b59
Remove unncessary cf_unit usage.
...
Make sure we only attach 1 of these devices.
2000-02-13 05:00:57 +00:00
9316cea99d
Remove unnecessary cf_unit usage.
2000-02-13 04:59:57 +00:00
919df6690a
Add support for / on RAID. A bit of a gross hack, but sufficient for now.
...
Note that this doesn't help you much until the RAID autoconfig code
in sys/dev/raidframe/rf_netbsdkintf.c is turned on.
2000-02-13 04:57:44 +00:00
445591e874
Get recent changes into the tree:
...
- make component_label variables more consistent (==> clabel)
- re-work incorrect component configuration code
- re-work disk configuration code
- cleanup initial configuration of raidPtr info
- add auto-detection of components and RAID sets (Disabled, for now)
- allow / on RAID sets (Disabled, for now)
- rename "config_disk_queue" to "rf_ConfigureDiskQueue" and properly prototype
in rf_diskqueue.h
- protect some headers with #if _KERNEL (XXX this needs to be fixed properly)
and cleanup header formatting.
- expand the component labels (yes, they should be backward/forward compatible)
- other bits and pieces (some function names are still bogus, and will get
changed soon)
2000-02-13 04:53:57 +00:00
9671588a30
Allocate the page buckets out of kernel_map, not kmem_map. Saves 16
...
or so kmem_map pages on a 32MB SPARCstation 2.
2000-02-13 03:34:40 +00:00
952281e8fb
Fixed a bug in the ATR parsing; If TA(i) was absent, then TA(i+1) was
...
used as TA(i) (and similary for TB(i) and TC(i))
2000-02-13 01:31:22 +00:00
0b2e81991d
Avoid panic when a non-working hub is detached.
2000-02-12 23:44:16 +00:00
84b6105bbe
Check if device is active in wi_intr and wi_inquire.
2000-02-12 23:35:28 +00:00
8ff64870d4
The T0 byte must not be included in the TCK calculation (ISO/IEC 7816-3
...
chapter 6.4.5)
2000-02-12 22:40:12 +00:00
fc8ea8f0c5
Misplaced #endif.
2000-02-12 22:06:54 +00:00
d3fb7161d2
Regen.
2000-02-12 22:02:01 +00:00
b4fac8c7d0
Add Microsoft Internet Keyboard Pro.
2000-02-12 22:01:31 +00:00
59748e7e55
Fix the unaligned accesses discovered by dbj.
2000-02-12 21:58:58 +00:00
09943f0ffa
G/c references to VM_KMEM_SIZE.
2000-02-12 20:57:12 +00:00
53e6733789
awi is an 8-bit only card, so set the 8bit flag.
2000-02-12 19:58:35 +00:00
1268cc5d6c
If we got an xfer from our backlog queue, don't allow sleeping; we're in
...
interrupt context.
XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
2000-02-12 19:12:52 +00:00
fc72b13d27
Const poison.
2000-02-12 19:05:55 +00:00
fd4ed9b425
Typo (Thanks, Havard :-)
2000-02-12 18:00:00 +00:00
46f7b67929
Small cosmetic change, and note a place where a statistic should be
...
gathered.
2000-02-12 17:45:44 +00:00
312cb38ccb
In the tcp_input() path:
...
- Filter out multicast destinations explicitly for every incoming packet,
not just SYNs. Previously, non-SYN multicast destination would be
filtered out as a side effect of PCB lookup. Remove now redundant
similar checks in the dropwithreset case and in syn_cache_add().
- Defer the TCP checksum until we know that we want to process the
packet (i.e. have a non-CLOSED connection or a listen socket).
2000-02-12 17:19:34 +00:00
8e114c7994
Nuke unused variable.
2000-02-12 16:09:33 +00:00
02bf7fcd13
add wi_detach and friends so that we can hot-swap wi card.
2000-02-12 16:08:04 +00:00
edc931efea
Make this compile without warnings on alphas.
...
(Problem noted by Aaron J. Grier)
2000-02-12 16:06:27 +00:00
918676c04f
Remove __BROKEN_CONFIG_UNIT_USAGE.
2000-02-12 16:00:13 +00:00
539689da9d
Remove another unneccessary reference to cf_unit.
2000-02-12 15:58:45 +00:00
c6471e4d9a
Remove an unneccessary reference to cf_unit.
2000-02-12 15:48:34 +00:00
523d157a05
Regen.
2000-02-12 15:02:56 +00:00
a79d73d045
Add Corega FEther adapter. From PR 9394.
2000-02-12 15:02:21 +00:00
e9c7fb4c36
change ramdisk size.
2000-02-12 13:48:46 +00:00
19533212a5
Correct comments on KGDB_* entries.
2000-02-12 12:59:36 +00:00
b518dc6dfc
Eliminate much of the goo in setting up zs device addressing.
2000-02-12 12:51:03 +00:00
980ac3a9eb
Fix typo.
2000-02-12 08:52:11 +00:00
01868857df
Add activate routine and check device active flag also in one second
...
tick handler.
2000-02-12 04:05:49 +00:00
fbc47bda30
Cosmetic changes.
2000-02-12 03:55:49 +00:00
5903e181fa
Nuke NKMEMCLUSTERS.
2000-02-12 03:29:18 +00:00
49ac0acd83
delete NKMEMCLUSTERS from configuration files.
2000-02-12 03:21:06 +00:00
1b188ee2ff
A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h.
2000-02-12 02:33:34 +00:00
55a78c1ee4
Add in 12160 (Ultra3) support. Turn back on fast posting for the new
...
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
2000-02-12 02:32:21 +00:00
56e16448ad
add in 12160 (Ultra3) related definitions
2000-02-12 02:29:00 +00:00
9f63fdeefb
add in 12160 (Ultra3) NVRAM definitions
2000-02-12 02:28:32 +00:00
87355d841f
add some Qlogic 2200 point-to-point and extended ICBOPT definitions
2000-02-12 02:26:26 +00:00
50f2620822
add 80 MHz case
2000-02-12 02:25:28 +00:00
3f96822c3b
some minor cleanups
2000-02-12 02:24:20 +00:00
63c56a9de6
add a more public shared i/f to target mode
2000-02-12 02:23:13 +00:00
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
29f08cd82d
add 12160 (Ultra3) microcode
2000-02-12 02:07:49 +00:00
3a09830119
printf format mismatch in DEBUG code (related to already fixed PR hp300/9388).
2000-02-11 23:00:47 +00:00
d10190a70c
Move the ite_default_* variables to ite.c. They are generic ite.
2000-02-11 21:42:52 +00:00
39a8093c78
Remove redundant test.
2000-02-11 21:36:38 +00:00
107405406d
Oops! Both grfcc and grfet need the generic grfabs layer.
2000-02-11 21:35:42 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
itojun