9cd36c6539
Fix an uninitialized variable in #ifdef DIAGNOSTIC.
...
Pointed out by soda.
2001-06-09 12:59:50 +00:00
e609865bbc
Correct reference to dtide.c, and don't bother with the "channel" locator to
...
dtide, since ata provides that anyway.
2001-06-08 22:33:59 +00:00
ca2047f7c6
Adapt the dtide driver to the MI podulebus framework, and move it to its new
...
home. It still doesn't actually work, but that's a SMOP.
2001-06-08 20:13:24 +00:00
837afd713e
Regen
2001-06-08 20:09:07 +00:00
e918a481e5
Move D.T. Software to their rightful place in the list, and correct the product
...
ID for their IDE interface. I've no idea where 0x00ae came from.
2001-06-08 20:08:35 +00:00
054673b07c
#endif /* takes no argument */
2001-06-08 12:51:17 +00:00
578730c551
Initialize sc->sc_anegticks to 5 on attach to prevent panic due to
...
assertion failure.
2001-06-08 07:09:40 +00:00
e5bd00e48d
For ports that wire up pciide in compatibility mode, have
...
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
ef047f21f8
Add multiple inclusion protection. Define prototypes for openfirm
...
routines used in cdevsw.
2001-06-08 00:19:17 +00:00
59024512bd
LKM friendly: move ev_out32() to netbsd32 specific code; add an ev_out32 hook.
2001-06-07 17:52:52 +00:00
7a3a78cfa3
Compile on sandpoint.
2001-06-07 16:48:09 +00:00
df4739c8cb
Set TI_OPMODE_1_DMA_ACTIVE only if hardware assisted checksum isn't used
...
(FreeBSD does it this way). My Tigon II works with hardware assisted checksum
now.
2001-06-07 14:35:58 +00:00
85fb541842
Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when
...
reporting interrupt errors.
2001-06-07 10:55:15 +00:00
72510eee6d
Make the WDC_{ATA|ATAPI}_NOSTREAM flags settable through configuration
...
options. Needed on the Atari Milan.
2001-06-07 06:33:48 +00:00
ff5871412e
Correct the receive mode mask in the RXCMD register.
2001-06-07 05:19:26 +00:00
025decbccb
Don't clear a callout on a scsipi_xfer that has been scsipi_done()'d.
2001-06-07 03:44:00 +00:00
26603afde8
Update URL to documentation PDF.
2001-06-06 22:11:42 +00:00
03e1c3aa16
implement HPCFB_SWAP_BYTE.
2001-06-05 17:29:12 +00:00
b596bfa2d0
add vc_reverse flag to struct video_chip.
2001-06-05 15:02:40 +00:00
a4221d6b08
change behavior of cmap_work_alloc().
2001-06-05 15:02:12 +00:00
15f8692183
Make some functions __inline.
2001-06-05 12:42:44 +00:00
8ee014b439
Handle the DL10022 case.
2001-06-05 02:31:16 +00:00
c619444a71
Use the DL10019 media routines on the DL10019 and DL10022 (a change
...
I forgot to commit long ago).
2001-06-05 02:27:02 +00:00
cae5d5a796
Lock the kernel lock at interrupt enter.
2001-06-04 21:31:28 +00:00
46762d3560
fix lint exposed by GCC 3.0 20010604 (prerelease).
2001-06-04 20:56:51 +00:00
859a6a49b2
ANSI KNF.
2001-06-04 18:59:31 +00:00
07677cc805
Use back the 'u'&037 form - since it's CTRL-u, it's more readable that way
...
Use \007 instead of symbolic constant, since that's what is more often used.
Pointed out by Robert Elz.
2001-06-04 09:45:03 +00:00
147c9186b5
Remove overly paranoid test (and not in the spec either). From OpenBSD.
2001-06-04 06:01:40 +00:00
d7079b251e
Regen.
2001-06-04 06:00:43 +00:00
db2a5598b4
Add the Logitech iFeel mouse.
...
(Now that's a weird device, perhaps I'll write a driver for the vibration
feedback.)
2001-06-04 06:00:20 +00:00
13aba87bcb
Don't pass nonpositive repeat count to CSR_*_MULTI_2.
...
Should fix kern/13092.
2001-06-04 03:34:47 +00:00
4cfd2cf1d0
s/printf/DPRINTF/ for kern/13101.
2001-06-03 23:52:51 +00:00
dccf11ae11
cngetsn(): cosmetic only - use '\025' instead 'u'&037, and '\b' instead '\007'
2001-06-03 17:56:10 +00:00
056e20f2cc
Need to get the kernel lock when entering by interrupts.
2001-06-03 15:15:02 +00:00
461a7daf74
fix comment
2001-06-03 14:29:42 +00:00
bcdd082840
Add a driver for the Initio INIC-940/950 PCI SCSI controllers.
...
Based on OpenBSD's iha driver, and modified some structures by me.
Tested on arc, i386 and macppc.
2001-06-03 13:43:45 +00:00
4e7cb03446
Differentiate between a DL10019 and a DL10022 (they have slight
...
MII differences).
2001-06-03 04:52:28 +00:00
37368cb858
Use the correct bitbang ops on the DL10022 (oops!).
2001-06-03 04:39:52 +00:00
cc3002d53b
Clarify a historical comment.
2001-06-03 03:55:10 +00:00
f75e45c854
In ti_init2(), use a simpler, more obvious, and correct MTU
...
calculation to give the firmware.
2001-06-03 03:46:43 +00:00
f2b9a1f3cc
Replace a bunch of home-grown Ethernet related constants with
...
ones defined in <net/if_ether.h>
2001-06-03 03:29:44 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
424f7a1e65
Make PHY matching all table-driven.
2001-06-02 21:39:38 +00:00
947699688a
Create hcscreg.h, and put a couple of magic numbers in there.
2001-06-02 20:13:50 +00:00
ca4d373730
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:06 +00:00
9590a56496
Use bus_space_{read,write}_multi_stream_2 where available.
2001-06-02 15:49:16 +00:00
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
2128d9199a
Enable frobbing the 1000baseT control register on Gig-E PHYs,
...
used for hard-wiring master mode, and for advertising the 1000baseT
media options during autonegotiation.
2001-05-31 18:44:48 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
ea1aed7db2
Make the number of ticks between auto-negotiation tries PHY-specific,
...
and default every PHY to 5 seconds (what we used before). If we find
Gig-E media on a PHY, bump it to 10 seconds, since it can take 5
seconds just to negotiate a Gig-E link.
2001-05-31 16:02:29 +00:00
f4afeda420
Reduce the delay when polling so that dumps go faster.
2001-05-31 11:31:43 +00:00
4d3b32a658
Cosmetic change.
2001-05-31 08:33:40 +00:00
ad090e7062
Regen; added NatSemi DP83891.
2001-05-31 03:32:38 +00:00
3ae72855b1
Add product ID for the NatSemi DP83891 1000baseTX PHY.
2001-05-31 03:32:20 +00:00
9f63d3cd86
Typo in last.
2001-05-31 03:07:14 +00:00
f07f44812d
The 1000baseT CR and SR are overlapped with the 100base-T2 CR and SR.
...
Note this in a comment. Add the 1000baseT CR and SR bits.
2001-05-31 03:06:46 +00:00
e7c225d7b2
Regen; product IDs for IDT RC32334 and RC32332 systeml controllers.
2001-05-31 01:13:33 +00:00
811d8d9102
Add product IDs for IDT RC32234 and RC32334 system controllers.
2001-05-31 01:10:34 +00:00
3fccfbf68d
Uninitialised variables, from Krister Walfridsson: in umass_scsipi_request()
...
initialize cmd before using it. Now that it's initialised earlier, use it
instead of xs->cmd
2001-05-30 20:31:39 +00:00
6973b27309
Uninitialised variable (from Krister Walfridsson): in acard_chip_map()
...
drop compatchan and use the real channel number instead.
2001-05-30 20:30:02 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
d84d2c6c85
add missing #include "opt_kgdb.h"
2001-05-30 15:24:23 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
f591dd2f9d
Cosmetic change.
2001-05-30 09:21:47 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
c5260261ba
Use the pseudo-DMA facilities of the HCCS SCSI podule. Code largely derived
...
from the pc532 "ncr" driver.
This gets me up to 300 KB/s from /dev/rsd0a on my A310. I think
bus_space_{read,write}_multi_1 and copy{in,out} are the bottlenecks now.
2001-05-28 22:54:10 +00:00
83da433ada
fix for UX96 (and all Yamaha specific devices, hopefully).
...
- fix how to get endpoint addresses.
- fix allocate count of pipes.
- add necessary null checks for asymmetry jacks.
2001-05-28 20:52:06 +00:00
5505749bb1
add new device; Yamaha UX96 USB MIDI I/F.
2001-05-28 18:28:04 +00:00
a62b5c1e2e
add a comment why IFF_PROMISC is handled separately for SIOCSIFFLAGS:
...
Handle special case for IFF_PROMISC. If only IFF_PROMISC
flag is changed, do not call an_init() to avoid initiating
reassociation to another access point. It is really
helpful for tcpdump(8).
2001-05-28 00:46:35 +00:00
ebf9e47c26
Add quirks for the Algorithmics P-5064 on-board 21143, and a way to
...
get the Ethernet address from it (they don't have an SROM).
XXX The latter should be replaced with devprops when they exist.
2001-05-27 21:00:33 +00:00
667dd41596
Remove ethernet CRC on received packets.
2001-05-27 19:36:06 +00:00
47745a094d
Add support for the Algorithmics ISA floppy controller.
2001-05-27 18:16:21 +00:00
ce289cc293
Handle non-contiguous BARs. Needed to be able to configure e.g.
...
IDE and USB on a PIIX3.
2001-05-27 17:50:40 +00:00
cbea766fd0
Add hcsc.
2001-05-26 23:02:06 +00:00
5cc459efcc
Quick hack of a driver for the HCCS 8-bit SCSI podule, based on the Oak driver.
...
Tested to the extent that it finds my disc.
2001-05-26 23:01:19 +00:00
ebf4596009
regen
2001-05-26 21:48:31 +00:00
eb6eb503f1
Fix typo in last commit.
2001-05-26 21:48:21 +00:00
7b0faa44c9
regen
2001-05-26 21:47:30 +00:00
d5ecc6c516
Add the 8-bit podules I got at Wakefield (except the A3000 Nexus,
...
which seems not to work).
2001-05-26 21:47:09 +00:00
41faed1386
Use cdev_decl() instead of local prototyping.
2001-05-26 21:24:38 +00:00
6d8a82ebc2
Use bus_space on arm26.
...
Update the comment to match list of bus_space-using ports.
Delete oak from list of drivers that need converting.
2001-05-26 20:55:48 +00:00
ab0637016a
Support NCR5380_USE_BUS_SPACE.
...
Add comments explaining the card a bit (and how badly we support it).
Add in-core RCSID.
2001-05-26 20:53:53 +00:00
bab53421c4
"oak" is now MI.
2001-05-26 17:50:30 +00:00
c7a388d937
Turn "oak" into an MI podulebus driver. Tested on my new A310.
2001-05-26 17:49:46 +00:00
f0ebb6c5a8
Add a comment about acemidi.
2001-05-26 17:47:45 +00:00
c9de53f96e
Create a kernel thread for Fibre Channel cards. This is the new
...
way of doing business- modulo some startup spasms and peculiarities
of the way kthreads are started (*after* configuration, weird) and
some strangeness with the freeze/thaw code, what now happens is
that any of Loop Down, LIP, Loop Reset or Port Datbase or Name
Server Database Changed ASYNC events cause the queues to freeze
for this channel. The arrival of a Loop UP is not relevant.
What *is* relevant is that the Port Datbase or Name Server Changed
async event indicate that it's okay to go and (re)evaluate the
state of the FC link and (re)probe local loop and fabric membership.
We have a kthread do this because it's *sooooo* much nicer to be
able to sleep while doing the 130-250 mailbox commands it'll take
to re-evaluate things.
When the state is well known again, we can unfreeze the channel
queues. Then, as commands start arriving, we simply can start them
or bounce them with XS_SELTIMEOUT (if the device in question has
gone away). Previously, we did lazy evaluation, which meant that
if a change occurred, we would wait until the very *next* command
to go rebuild stuff.
The reason this is not sensible is:
a) Even with sleeping, you can hang up your system because you might be
making some poor stat(2) call pay the price of re-evaluating the whole
fabric.
b) If we ever really want to get to dynamic attachment/detachment, we
should find out sooner, rather than later, where things get to.
Split off ispminphys_1020 from ispminphys- a 1020 has a 24 bit limit-
not anything newer.
Re-enable LIPs and Loop Resets as async events- this allows the outer
layer to set policy about them.
Roll platform major && minor. Remove bogus waitq (no longer used).
Remove callout entry in softc (no longer used). Define some shorthands
for channels. Clean up a variety of cruft left over from the
thorpej_scsipi changeover.
2001-05-25 21:45:55 +00:00
5b51f5ebe2
fix forgotten/malformed initialization of some variables.
...
(pointed out by Krister Walfridsson.)
2001-05-25 19:33:36 +00:00
339a9c8de2
Fix two typos in the BYTE_ORDER != LITTLE_ENDIAN case.
2001-05-25 08:54:40 +00:00
6229248ec0
minor style
2001-05-24 08:12:28 +00:00
85efd7edb1
correct multicast filter handling. without this, we cannot run IPv6 on an*.
2001-05-24 08:06:04 +00:00
9d59ae231c
adjust fas register fields names
2001-05-23 18:32:26 +00:00
a98b728b88
Call scsipi_channel_thaw() after scsipi_done() so that command ordering
...
is preserved.
2001-05-23 15:51:32 +00:00
72b4ba8aed
In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue().
2001-05-23 15:50:32 +00:00
fae4d6d720
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 02:16:19 +00:00
24b32e8f08
Add missing definitions for hw checksumming.
2001-05-23 00:56:58 +00:00
d298a26243
Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async
...
notifications. Let each platform set policy as to what to do
with these.
2001-05-22 19:32:41 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
607b14bf7b
Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham.
2001-05-22 16:58:23 +00:00
a888f6ef73
If the cache line size in the BHLC register is not configured,
...
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
2001-05-22 16:10:44 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
6e2bc5b352
Enable the PCI MWI command for memory writes on the i82558 and
...
higher.
2001-05-22 16:05:01 +00:00
b16ba1d8cd
Add i82562ET id.
2001-05-22 16:04:27 +00:00
188e0d6625
Some changes from the new FreeBSD `fxp' driver:
...
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
"Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559. This is all handled
transparently by the hardware. When in promiscuous mode, allow
wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559. This places two
Transmit Buffer Descriptors directly in the TxCB, which should cover
the vast majority of packets transmitted. This saves PCI transactions
that would otherwise be required to fetch the TBD list.
With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
2001-05-22 15:29:30 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
e25bf167a1
Regen.
2001-05-22 10:43:15 +00:00
f43e2c6ba1
Add Scanjet 4300.
2001-05-22 10:38:56 +00:00
a5a03e13dd
Report 82558, 82559, etc. based on chip revision. Also, remember which
...
revsion we have for feature enables later.
2001-05-22 01:23:25 +00:00
4af61a686a
oops. Make it compile.
2001-05-22 00:43:12 +00:00
b5805fa0c8
Sigh. Regen correctly.
2001-05-22 00:41:52 +00:00
611e112566
A little slight cleanup.
2001-05-22 00:27:01 +00:00
7a31dfa328
Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303.
...
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
2001-05-22 00:18:03 +00:00
fb4607ec45
Add some additional register definitions, from FreeBSD.
2001-05-22 00:07:32 +00:00
0064d69faf
Re-arrange the transmit control data somewhat so that we can
...
use the extended TxCB format (that change will happen later).
2001-05-21 23:58:44 +00:00
92d92b1cb2
Correct an easy mistake in initializing gain registers.
...
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
2001-05-21 23:55:04 +00:00
65ac078927
Sigh, typo in last.
2001-05-21 23:21:27 +00:00
00f922fa70
Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also
...
increase the number of Rx buffers from 64 to 128.
These mirror some performance tweaks made to the sip(4) driver.
2001-05-21 22:20:31 +00:00
afdab0cab8
The ICH3 also has the Resume Bug.
2001-05-21 22:12:08 +00:00
a0f9e3c6fb
Regen; add ICH3 network controller IDs.
2001-05-21 22:11:31 +00:00
6b51adfbff
Add ICH3 network controller IDs.
2001-05-21 22:11:06 +00:00
d84e2452ea
Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they
...
have the same value).
2001-05-21 21:49:51 +00:00
b4538a0165
The 82801BA built-in Ethernet has a bug which requires us to
...
issue a NOP before a CU_RESUME when in 10baseT mode. Handle
this.
2001-05-21 21:47:52 +00:00
e7a0ef6145
ANSI'ify.
2001-05-21 20:59:38 +00:00
ecb3a30463
add $NetBSD$
2001-05-21 20:47:13 +00:00
3462fe5d99
Remove reference to adapter_q in scsipi structure. Comment about the
...
usage of channel_q.
2001-05-21 15:50:46 +00:00
598241f757
add product COREGA FEther-PCC-TXF
...
kern/11357 and report from goro@venus.dti.ne.jp
2001-05-21 13:48:25 +00:00
fd7d5008e8
regen
2001-05-21 13:45:10 +00:00
4108bc4645
add product COREGA FEther PCC-TXF
2001-05-21 13:44:48 +00:00
2ed6d9dbf7
PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size
...
CDB (16 instead of 12).
2001-05-20 21:07:58 +00:00
86e12294cd
Add Multi-media/Ethernet card from Irlam.
2001-05-20 21:07:06 +00:00
65165c3deb
16-bit podules I acquired at Wakefield:
...
- Added SJ Research Nexus
- Note HCCS use same ID for IDE and SCSI cards
- Update Castle EtherSCSI entry
2001-05-20 20:40:19 +00:00
cb675810e0
add more comment about firmware of EVAL-CARD.
2001-05-20 13:14:54 +00:00
c13971f816
chenge chip and card identity,
...
print RF-chipset, Medium Access Controller(MAC) and CARD-identity
2001-05-20 12:57:57 +00:00
309a9b433c
delete RCS Id from pcmciadevs rev 1.128
2001-05-20 10:47:50 +00:00
3b35709de7
make compile again
...
(fix warning : missing white space after `#define....)
2001-05-20 09:54:47 +00:00
a2dd9d529f
regen
2001-05-20 09:16:14 +00:00
caed7fa236
add vendorID National Instruments
...
add productID PCMCIA-GPIB
2001-05-20 09:15:54 +00:00
281f1795a4
Add TI 1410 to yc_chipsets[].
2001-05-19 19:46:08 +00:00
3d863329cc
space/TAB cosmetics
2001-05-19 12:04:07 +00:00
5c9dc5b0d0
When abusing structs to describe on-wire (or in-hardware) data structures,
...
they need to be packed. (Without this, breaks on at least m68k.)
2001-05-18 21:11:43 +00:00
e4334b830d
Don't capitalize the word sync or async. It's inconsistient with other
...
messages.
2001-05-18 16:25:07 +00:00
d5338ae90e
Regen.
2001-05-18 15:35:49 +00:00
679f6a1a54
Add product IDs of internal devices found in NEC VRC4173 and vendor/product
...
ID of MediaQ MQ200.
2001-05-18 15:35:19 +00:00
8aa2f73d43
Enable tagged queuing again; should work now with scsipi_base rev 1.42
2001-05-18 12:57:42 +00:00
8b5bf22895
Workaround for broken drives (explained to me by Chris G. Demetriou):
...
some devices can't handle tag number larger than some values and always
reject commands with QUEUE FULL if the tag number is larger than this.
Under some circonstances the scsipi system may not decrease periph_openings
(as a workaround of other odd behavior) and we may end up requeuing the command
with a hight tag value again, and the driver could loop on this.
Workaround: in case of queue full, decrease periph_openings to
min(periph_active - 1, periph_openings - 1) so that, after some iteration,
periph_openings is less than the max tag value acceptable by the device.
Solves the problem with tagged queuing on ncr53c9x for me.
2001-05-18 12:56:28 +00:00
d76bcda838
Fixed some typos, removed unused asm() labels. Removed
...
the DMA map creation, now the bus glue does this.
2001-05-18 12:51:58 +00:00
3df4a7a4a8
do this console device lookup thing the right way this time
...
(This "dev" argument to the console functions is nonsense - nothing
should depend on it.)
2001-05-18 11:49:21 +00:00
4601552595
Regen
2001-05-18 06:14:40 +00:00
6f032f45b3
Support the Socket EA pcmcia ethernet (ne). It's ooooold.
2001-05-18 06:05:52 +00:00
f1f78293df
- Add some instrumentation which can be enabled by defining
...
SIP_EVENT_COUNTERS.
- Decrease SIP_NTXSEGS to 8 and increase SIP_TXQUEUELEN to 256.
This gives us 256 transmit jobs with only twice the descriptor
memory footprint. This prevents stalling transmissions due to
lack of transmit jobs under heavy load.
- Increase SIP_NRXDESC to 128 so we don't run out of receive descriptors
under extreme load.
- As recommended by the manual, leave one descriptor in the transmit ring
with OWN clear to prevent wrap-around.
- Even though the manual claims that driver software must initialize
TXDP if there are no pending transmissions when a new transmission
is to be initialized, doing so causes serious performance degredation
on the DP83820 under heavy load. Not initializing TXDP also increases
performance on the DP83815.
All of this gets us up to ~90Mb/s on both the DP83820 and DP83815 when
connected to a 100base network.
2001-05-18 04:38:30 +00:00
dbdf3820d8
Add a driver for the National Semiconductor DP83820 Gigabit Ethernet
...
chip. This is found on the NetGear GA-622 and Asante FriendlyNet
GigaNIX.
2001-05-18 02:03:53 +00:00
7ddcb8122d
SDEV_DB -> SCSIPI_DB
2001-05-17 20:02:56 +00:00
bc8eda57c9
increase the delay after PHY reset - it seems that mii register accesses
...
can fail if attempted too soon after reset
2001-05-17 19:00:18 +00:00
199e9f8164
regen
2001-05-17 17:39:30 +00:00
10aff2d3f0
argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
...
They managed to mess it up in a new way.
2001-05-17 17:39:00 +00:00
c1f451f54d
regen
2001-05-17 17:37:01 +00:00
2e9334d53e
add some stuff I got between my fingers
2001-05-17 17:36:30 +00:00
c1617a9b13
check PCI subsystem ID for a SMC9432BTX1 or SMC9432FTX and tell the common
...
driver about their media support (BNC and 100FX, respectively)
2001-05-17 17:35:13 +00:00
323adb5a41
support BNC interfaces (serial mode) as on the SMC9432BTX and 100FX
...
on the SMC9432FTX
2001-05-17 17:32:47 +00:00
1ea0cb1ea4
support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER
...
flag is passed in from the board driver
2001-05-17 17:29:54 +00:00
002851041c
re-enable mii_flags in attach args - I've found a use for it: tell the
...
PHY which support it that a fiber interface is present
2001-05-17 17:28:21 +00:00
0fcd8f3c7f
regen
2001-05-17 13:15:47 +00:00
8f8e3e808f
add products
...
Intel PRO/Wireless 2011 LAN PC Card
2001-05-17 13:14:19 +00:00
5e1115908d
Revert previous change; this breaks for the old controllers which 1.6
...
should help for. Instead, weaken the "echo" test: don't insist in
getting the same value back which was written.
2001-05-17 10:48:39 +00:00
d1bc67e029
In osiop_scsidone(), call scsipi_done() even for polled operations.
...
This fixes a `hang' on shutdown when the `Synchronise Cache' command
is sent to a disk. (It uses polled mode because it is called from inside
a shutdown hook).
2001-05-17 10:35:30 +00:00
c2b5ec5220
Add a few nits. Hubs seem problematic on resets sometimes.
...
Also, make sure fwohci can detach cleanly (for cardbus).
2001-05-17 05:30:37 +00:00
bcc2ce4f8c
give sunkbd and sunms a "poll" routine.
2001-05-17 02:24:00 +00:00
90cabee3fb
Per helpful suggestion from LukeM- make INLINE usage consistent (and
...
use correct __inline format).
2001-05-16 21:41:52 +00:00
8e532c1ad1
Make sure to allocate big enough mbuf data area before elevating
...
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.
This also fixes ancient kern/2478 by Bill Sommerfeld.
2001-05-16 20:30:52 +00:00
8a78799bf4
support BUFFALO AirStation WLI-PCM-S11
...
this card are PRISM2.5 card.
2001-05-16 14:33:21 +00:00
c6da2452c0
Put back /usr/include/dev/tc/sticreg.h.
2001-05-16 13:48:52 +00:00
25221c413e
regen
2001-05-16 12:57:55 +00:00
4c575cc65b
add product
...
BUFFALO AirStation 11Mbps WLAN Card
2001-05-16 12:57:27 +00:00
eef5fa50d3
Big-endian support.
2001-05-16 10:45:36 +00:00
15833cae3b
add prism chip identity, Prism2 with SST flush.
2001-05-16 07:53:28 +00:00
ff47810d07
fix previous delint
2001-05-16 06:29:01 +00:00
c15945130c
delint: remove unnecessary assignment to same objection (hidden in #define)
2001-05-16 04:50:11 +00:00
be493349d2
delint: zero sized array initalisation is a gccism
2001-05-16 04:39:03 +00:00
927097774a
delint: remove volatile from fxp_mdi_read() decl
2001-05-16 04:20:55 +00:00
b81e69fa8e
beginning basic 2300 infrstructure support
2001-05-16 03:58:34 +00:00
9f2c2c7a8c
Keep up with the Joneses.... further synchronization for the eventual
...
implementation in NetBSD for target mode.
2001-05-16 03:58:03 +00:00
73eba1a839
Long overdue- put locks on the usage of the mailbox command stuff. This
...
keeps us from stomping on ourselves.
Say we're in the middle of re-evaluating a loop (and sleeping) when a
command completes, or a timer refires, and this *other* thread decides
*it* wants to start re-evaluating the loop. Bad news.
We have to be a bit careful- if we can't acquire the MBOX semaphore at
interrupt level, we will simulate a host interface error. This is a bit
of a temp workaround. There's some work underway driven by a NetBSD
commercial user that will try and force most mailbox stuff into a
part A/part B interrupt driven model.
2001-05-16 03:55:15 +00:00
a1dd9d78ee
It's 'role None', not 'role No'.
...
Also, pay attention to the difference in the ISPASYNC_CHANGE_NOTIFY
between loop and fabric changes.
2001-05-16 03:52:10 +00:00
9a3074ffce
cosmetic change.
...
change version format: <major>.<minor> variant <num>
2001-05-16 02:36:37 +00:00
91d9961f24
Regen
2001-05-15 23:18:16 +00:00
75d77bf185
Add OUI for PMC-Sierra. Add BCM5221 Phy. Add PM8351 Phy.
2001-05-15 23:17:48 +00:00
f5d9baae2f
Note that extended status is in register 15
2001-05-15 23:16:40 +00:00
6ae38c2f7a
Try the kbc_auxtest if the random write/read to the aux port fails (it returns
...
0xfe on my gateway 2000 circa 1993). That should not affect broken controllers
that choke on the kbc_auxtest, because for those the write/read test succeeds.
2001-05-15 22:01:07 +00:00
c2ffdccb2b
Regen; Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:33 +00:00
8fd542b023
Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:04 +00:00
d62b92e0f7
delint: () protect some macro args
2001-05-15 15:41:27 +00:00
889762fbcf
delint: need ; between case label and }
2001-05-15 15:25:04 +00:00
e3134697e1
delint: remove comments from macro args; confuses cpp/lint
2001-05-15 15:06:23 +00:00
09ba301f07
delint: () protect some macro args
2001-05-15 15:00:04 +00:00
9bef152bd7
delint: need ; between case label and }
2001-05-15 14:57:49 +00:00
0b6a1eb95a
delint: () protect some macro args
2001-05-15 14:37:36 +00:00
d3e16de232
delint: need ; between goto label and }
2001-05-15 14:30:24 +00:00
b6b83e2ec3
delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size
2001-05-15 14:03:27 +00:00
13a9902fc6
delint: can't have an empty case item at the end of a switch; need a ; at least
2001-05-15 13:53:20 +00:00
ae0203ee27
Correct arguments to bus_dmamap_create(), and add a reset routine for the v3
...
interface.
2001-05-15 12:49:37 +00:00
0071e88a8c
fixed mistake.
...
major version and minor version were made reverse.
2001-05-15 11:45:50 +00:00
08d33f4cc0
Fix indentation in recent commit.
2001-05-15 09:06:15 +00:00
4afb07bd12
getting prism2 firm ver routine to wi_get_id().
...
if firm ver is more than 0.8c3, promiscuous mode is off.
typo WI_RID_STA_IDENEITY -> WI_RID_STA_IDENTITY
2001-05-15 09:01:27 +00:00
0aae41bf84
Clean up comment about unregistering callbacks
2001-05-15 06:54:07 +00:00
c3967bca55
Various small changes.
...
Clean up one bug in a DPRINTF in arrs_input which could panic on some packets.
Gut the ack/response functionality and clean it up so all packets get checked
correctly and the abuf struct isn't used once the ab_cb has happened (there
still could be ack packets waiting to be processed at that time).
Finally, add some documentation explaining read/write/inreg and their
purpose/argument calling.
2001-05-15 06:52:30 +00:00
d91da495a9
Back out last change until I get fwohci rototilled better for checking the ack bits. Makes things compile again.
2001-05-15 06:30:30 +00:00
caa399b739
WEP cannot be used when Prism2 Firm version is lower than 0.8.3.
...
Although WEP is used in Windows also in an old firm,
because WEP is processed by the windows driver side.
If Prism2 Firm version is more than 0.8.3, WEP does work without 'Promiscuous ON'.
2001-05-15 04:27:22 +00:00
4d4231d0e9
Add support for "Corega FEther CB-TXD".
...
kern/12709: from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:26:23 +00:00
b003ab3d9c
Regen.
2001-05-15 04:25:12 +00:00
0f5babc5cb
Add product "Corega FEther CB-TXD". Modified from kern/12709.
...
from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:24:28 +00:00
2970b99ac9
It enabled it to control roaming mode and authentication mode.
...
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.
wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
2001-05-15 04:14:06 +00:00
38c798fe9f
Encapsulate name declarations in macros in preparation for adding
...
conditionally-compiled code for the DP83820.
2001-05-15 03:06:21 +00:00
edfd12a9b1
Define the register/descriptor differences between the DP83815 and the
...
DP83820. The DP83820 definitions are wrapped in #ifdef DP83820, since
there are enough differences that a single binary object would not be
able to efficiently drive both the DP83815 and DP83820.
2001-05-15 02:19:05 +00:00
bdb6ea6ecc
Regen; added DP83820 Gigabit Ethernet chip.
2001-05-14 22:37:24 +00:00
285931ff50
Add product ID for the National Semiconductor DP83820 Gigabit Ethernet
...
chip.
2001-05-14 22:36:06 +00:00
2573405952
Add latent vendor entries for ServerWorks and Winbond IDE controllers.
...
No code to use them as yet.
2001-05-14 20:41:27 +00:00
bc980d7eba
Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define
...
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
2001-05-14 20:35:27 +00:00
85c02ac331
epintr(): eliminate write-only variable 'addrandom'
2001-05-14 09:28:49 +00:00
6ff7de5716
remove unneeded #includes, fix typo
2001-05-14 08:01:23 +00:00
1f7c685ce3
remove //-commented debugging stuff
2001-05-14 07:35:33 +00:00
497bb809df
do not use the synchronous read mode for MCA 3c529
2001-05-14 07:03:50 +00:00
61ca5f641b
Remove ackcb. It's a duplicate of existing functionality.
2001-05-14 06:51:36 +00:00
98139fa8b9
Make sure and zero out the malloc'd abufs before using them.
2001-05-14 05:46:41 +00:00
7f2de75450
Corega FEther PCC-TXD works fine.
2001-05-14 01:44:42 +00:00
9a107674e5
regen
2001-05-14 01:43:42 +00:00
70f4199532
add product Corega FEther PCC-TXD
2001-05-14 01:41:16 +00:00
2cd8833615
Change the comment about sucky performance to recommendation to remove
...
DIAGNOSTIC/DEBUG from the kernel. This helped to boost the performance
on my test machine from ~5KB/s to like 800KB/s for ftp test, and
to like 700KB/s for netio test. I wouldn't have imagined the options
are THAT costly ....
2001-05-13 20:43:04 +00:00
9654c235a7
Note TS11 (ts).
2001-05-13 15:34:25 +00:00
59b29023fd
Update the TS11 driver to useable state.
...
Thanks to Michael Kukat for providing a machine to test this driver.
2001-05-13 15:32:40 +00:00
f66126b9f0
Moved from sys/arch/vax/uba/.
2001-05-13 15:30:10 +00:00
637bffc245
Add bus type to softc.
2001-05-13 15:23:37 +00:00
3790f44eac
Add a retries counter to abuf
2001-05-13 05:02:08 +00:00
880b3e6a6f
Add locators support
2001-05-13 05:01:42 +00:00
a3263e073a
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:24:51 +00:00
95cc3bf342
Turn off PCMCIACISDEBUG by default. This should get set with options in a config file
2001-05-13 04:24:28 +00:00
6cf92c7dba
Turn off PCMCIADEBUG by default. This should get set with options in a config file
2001-05-13 04:23:46 +00:00
6f62797262
Don't leak memory in case of a realloc failure.
...
Reported by: grendel@heorot.stanford.edu (Ted U)
2001-05-12 19:18:57 +00:00
tsutsui