- Add xen devices to MAKEDEV
- Add Xen kernels to list of kernel to build
- Add INSTALL_XENU to the install kernels
- introduce the xbd disk devices to sysinst.
This will add 3 kernels to the i386 release:
XEN0 for use as a Xen domain0 kernel
XENU for use on a non-privileged domain
INSTALL_XENU to install NetBSD on a non-privileged domain virtual disk.
want to keep or delete the dist files.
Stop the "type enter to continue" if the rmdir fails - may not be empty.
Report an error if the chroot() (for RUN_CHROOT) fails.
fflush log and script files before writing to them from a child.
Usually the unreadable part will be swap, but remove it from root even
if swap is not selected.
The user can always put it back on the next screen.
Saves sysinst allocating /usr when the bios geometry excludes the last
few MB of the disk (32 on one disk I have).
finding them out and adding the comments to wsksymdef.h.
Make German always have KB_NODEAD set - IIRC Martin said that is needed.
Unfortunately this means we have our own list...
that the "int maxgroups" and "int *ngroups" parameters are separated into
two separate parameters which makes it possible to call multiple nsswitch
back-ends and have the results correctly merged.
getgrouplist(3) is now implemented using getgroupmembership(3).
Proposed on tech-userlevel on December 1, 2004.
contain a GENERIC kernel.
With this commit, NetBSD can now be successfully installed via sysinst on the
IP12 (Personal Iris / Indigo R3k) family of workstations.
* Add the IP12 kernel set to the list, and make it the default kernel selection
if we're installing on an IP12,
* Don't install ARCS bootblocks on IP12,
* Install the ECOFF kernel to the volume header for IP12.
filesystem and then follow existing symbolic links in that filesystem.
The choot is required to make absolute links be processed correctly,
and must be done by tar because the program (and input file) do not
exist inside the chroot.
Fixes PR install/5010 and install/8090 (at least)
trying to parse the output of ifconfig)
Loop if the user specifies an unsupported media type.
Run ifocnfig to set the media type (any anything else the user typed in)
before running dhcp to assign an address.
Correctly extract the defualt gateway from output of 'route -n show'
Extract nameserver from resolv.conf without using get_command_out(),
delete get_command_out().
Fixes (at least) PR install/11880, install/12706
Remove a 'Press <enter> to continue' message that was accidently left
in by a previous commit.
Fixes PR/18555 (and a recent discussion on a mailing list)
exists, and use the 'c' (raw) partition for boot code installation
instead of the 'a' partition (which will not work). This should fix
the problem that newly-partitioned and newly-installed disks will not
be made bootable by sysinst.
in PR install/27281.
XXX - Output is not correct since sysinst does not set the proper LC_CTYPE
yet (which happens to not affect umlauts, but sharp-s (0xdf))
The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.
* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.
With help from abs.
Move info about cylinders to the 'ask for units' menu.
(translations need checking, done by cutting sentences)
Stop i386 always asking for units.
Use BIOS cylinders for MBR and disk cylinders for the disklabel.
(code intended to do this, but got it wrong...)
Mark some menus as 'sub menu' or MC_SUBMENU so that the screen underneath
is saved.
Add GENERIC.MPACPI to i386 menu.
and bcylsize (bios cylinder size) can be calculated in the one place
it is needed.
The ask_sizemult() call will go once I decide what to to with the
(slightly useful) explanatory text about cylinder alignment.
a single function, the latter is now the return value of get_ramsize().
Changed all uses of rammb to get_ramsize().
Used the 64bit HW_PHYSMEM64 so silly things don't happen if the memory size
approaches (or even exceeds) 4GB.
Save the result in /etc/wscons.conf at the end of the install/upgrade.
Currently only builds for i386 - change arch/*/Makefile and add the
extra messages (though they could go into the msg.mi.* files).
Needs the 'Keyboard type' message translated in to German, French and polish.
Maybe the keyboard type names could be less cryptic...
I've made the error retry loops go back as far as the input menus.
Split all the pathname inputs into 2 pieces (base directory and set directory).
Reduced the size of some fixed strings.
Stopped the install aborting if ftp can't find a set (eg the X ones).
The French and Polish transations don't differenciate between Base_dir and
Set_dir - but that can be fixed later.
Convert ' ' to 0 to ensure a valid device name is genarated.
(This will be a problem in 'upgrade' when filesystems are mounted
using the targets extisting /etc/fstab.)
written into the correct place - even if the user decides not to update
the mbr code and has the old (pre layout change) code installed.
Tell the user that the mbr code needs updating if the new install uses
'all the disk' and teh old version had the bootselect code (otherwise you
get an empty menu).
Probably fixes PR install/25146
use union to align struct fs
don't check error return from fsck upgrade/downgrade runs
use RUN_DISPLAY | RUN_PROGRESS when running upgrade runs
don't use opendisk
much the same function).
Mainly some extra comments, also moved a 'static' so we use 512bytes of
stack and not static data. Killed call to access() as it is pointless
and doesn't do what you want (access is for suid programs to check whether
the real user could do the operation).
