c011a5eae4
Handle break more correctly.
...
Make IER_ETXRDY track TS_BUSY. (Prevents a loop in comintr() if no output
is available.)
Add a bunch of debugging code.
1996-02-19 14:53:03 +00:00
760b34026c
Declare a variable...
1996-02-18 22:19:44 +00:00
ba2ac1b587
Clean this up a bit.
1996-02-18 22:17:37 +00:00
47286969ae
Add bass/treble input filter adjustment controls to SB (Pro) driver
1996-02-18 16:36:44 +00:00
e5730c4a73
Fix a race condition where we might stop outputting if a write follows a
...
flush too closely.
1996-02-18 09:10:15 +00:00
203f5d5329
Add some text describing the UART lossage worked around in the previous.
1996-02-17 04:51:41 +00:00
03f1e1432a
fix compile error from gusprobe() cleanup
1996-02-17 04:49:50 +00:00
121f6570d7
Drain the transmitter FIFO before changing the baud rate or FIFO depth
...
registers. Fixes PR 2046.
Also, if COMCONSOLE is defined, expect CONSPEED to be the baud rate.
1996-02-17 04:04:28 +00:00
28feffd508
avoid panic'ing when driver gets confused--just spit out a message and
...
keep going.
Improve error messages to include device name.
use STATIC for function declarations/definitions so it's easier to get a
useful symbol table by flipping a switch.
1996-02-17 03:35:22 +00:00
7847c9efee
Various:
...
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
19f59bf3c2
Prototype the probe and attach functions.
1996-02-16 08:18:32 +00:00
7af4edd731
Various, including:
...
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
11d31f7ce7
Hayes ESP patches [from PR database]
1996-02-10 20:23:18 +00:00
28bf676a23
Read the 14f/34f registers in 8-bit mode.
1996-02-09 17:38:09 +00:00
54c51d4393
Document this file better, mostly from John Vinopal
...
<banshee@gabriella.resort.com>. Closes PR #1864 .
1996-02-05 23:01:50 +00:00
ae06fdb589
Allow blocksize of NBPG/2 to NBPG for higher sampling rates. From
...
Lennart Augustsson <augustss@cs.chalmers.se>, closes PR 2013.
1996-02-05 21:32:26 +00:00
3ae2aedf4d
Fix error in copyright notice
1996-02-05 02:18:48 +00:00
240e22087c
Received copyright assignment
1996-02-05 00:10:32 +00:00
919f6728ab
Accept DIOCEJECT as a synonym for CDIOCEJECT. Implement DIOCLOCK
...
separately from CDIOCALLOW and CDIOCPREVENT, even though they perform
basically the same function (with a different interface XXX).
1996-01-30 18:28:02 +00:00
02317d25bb
Make the panic message for ISA clone devices more informative.
1996-01-16 07:52:38 +00:00
d3427703db
Hayes ESP support from Michael Van Loon, with minor cleanups. Tested on
...
a single port ESP card; works great!
1996-01-14 23:44:34 +00:00
f08d96426e
Oops. Fix RCS id.
1996-01-13 02:06:30 +00:00
e422ebca1a
Add the "ahe" driver, autoconfiguration support for the aic7xxx-based
...
Adaptec 2[78]4x SCSI controllers, from Michael Graff <explorer@flame.org>.
Fixes PR #1594 from Noriyuki Soda <soda@sra.co.jp> in a different way.
1996-01-13 02:05:14 +00:00
48bb61e0d7
Use WTDBPRINT() instead of DEBUG() for driver debugging printf()s..
...
Fixes PR #1927 , from Erik Bertelsen <erik@arhpc214.uni-c.dk>
1996-01-12 00:54:23 +00:00
5e81dcd27a
Make it a tad more obvious that this is a 3c505 driver.
1996-01-10 18:21:52 +00:00
75caa8c729
Imported from OpenBSD/FreeBSD:
...
Add support for the SMC8416 (EtherEZ) ISA ethernet card.
The 8416 has an 8K shared mem (the old driver assumed 16K
and failed at attach time).
1996-01-10 16:49:22 +00:00
3441f118d5
Make sure we disk_busy() for every transfer we start.
1996-01-08 21:21:56 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
b9c37470a0
Fix Ultrastor 24f probe, per Andrew Gillham.
1995-12-26 17:16:55 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
f096f370fb
Use SET(), CLR(), and ISSET() macros.
...
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
1995-10-15 19:43:04 +00:00
3450507404
Make sure we only schedule one timeout to refill the mbuf queue.
1995-10-10 03:11:28 +00:00
85285f6ead
Add a shutdown hook.
1995-10-07 09:19:13 +00:00
86939fd839
Fix typo.
1995-10-04 00:35:07 +00:00
393a69d6db
Modularize the CCB/MSCP/ACB/ECB handling a little. No functional changes.
1995-10-03 20:58:56 +00:00
a47ab73248
memcmp -> bcmp. Fixes PR #1518 .
1995-09-26 22:56:54 +00:00
26419c5a8b
Don't declare Debugger(). It's handled in <sys/systm.h>
1995-09-26 19:31:15 +00:00
ddbb956f35
fixes a typo, the case where iomem is specified, but iosize is not, and
...
moves a couple of ee16 specific calls into a 'if ee16' protected block.
From Andrew Gillham <gillham@Digitron.COM>
1995-09-26 13:24:48 +00:00
0fbf2ca04a
Make *print() a message if no scsibus was attached. Also, return something
...
valid.
1995-09-14 20:43:09 +00:00
abe82a6680
Etherexpress-16 driver collision by Andrew Gillham <gillham@Digitron.COM>.
1995-09-14 12:41:32 +00:00
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
6567855472
Count collisions and errors better.
1995-08-05 23:53:18 +00:00
82b6eec41c
Use an intermediate variable to shorten label initialization code.
...
Make wddump() work on more machines.
1995-08-05 23:50:23 +00:00
24a5e56396
Use an intermediate variable to shorten label initialization code.
1995-08-05 23:47:52 +00:00
60d2d483ca
Turn off the mbi diagnostics completely.
1995-07-29 23:04:54 +00:00
a4fcbe857d
Don't loop if we're out of CCBs/SCBs/MSCPs.
1995-07-28 22:49:56 +00:00
38036ed16e
Fix an oversight in the previous.
1995-07-27 05:01:08 +00:00
c9f7b2a185
Add PCI-specific configuration for PCnet-PCI.
1995-07-27 04:39:05 +00:00
7ba8b413d9
Disable diagnostics related to expected mbi race condition.
1995-07-27 01:00:11 +00:00
e8c91e1129
Fix typos.
1995-07-25 05:11:11 +00:00
e413887539
Update to use dev/ic/am7990.c.
1995-07-24 18:04:21 +00:00
830a91b2e9
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:16:44 +00:00
a696e525b7
fix function prototypes, usages, to match what the code actually does
1995-07-24 05:54:52 +00:00
bdb9d41d7e
Fix thinko in packet size diagnostic.
1995-07-24 04:12:45 +00:00
2d37aba592
Add missing `break;'.
1995-07-24 02:46:47 +00:00
ff82158c19
Fix typo.
1995-07-24 02:43:11 +00:00
4f36e42ff4
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:40:38 +00:00
413a5efc0c
Pass a softc to leget(), not an ifnet.
1995-07-24 02:29:59 +00:00
33292f0f88
Fix typos.
1995-07-24 02:08:13 +00:00
7998e5ab4c
Various cleanup:
...
* Use standard function naming conventions.
* Only increment if_ipackets when a packet was actually received.
* Check for excessively large or small packets before trying to read them.
1995-07-24 02:02:45 +00:00
b5699db68d
Rename new xmit_busy back to txb_inuse.
1995-07-23 23:42:47 +00:00
799910cb2c
Remove txb_inuse. Other stylistic changes.
1995-07-23 22:12:16 +00:00
1df91e03ca
Remove a noop clearing of IFF_OACTIVE.
1995-07-23 22:09:11 +00:00
1199b1b042
Exchange xmit_free for xmit_busy. Add BPF hook to iestart().
1995-07-23 22:02:20 +00:00
317db86dd3
Stylistic changes.
1995-07-23 21:37:51 +00:00
9b2ae2a3cd
Stylistic changes.
1995-07-23 21:26:48 +00:00
4da9a5f814
Stylistic changes.
1995-07-23 21:14:31 +00:00
644935b313
Slight rearrangement. Also, force eg_incount to 0 after a reset.
1995-07-23 20:54:23 +00:00
ecf259e342
Call epmbufempty() any time the board is stopped.
1995-07-23 20:46:49 +00:00
57528ce346
Init functions are always called at splimp().
1995-07-23 20:36:51 +00:00
6bc1cc31f8
Push the copying of the output buffer further down, with the intent of
...
eliminating it and outputting the mbufs directly. Make sure the queue drains
even if packets are not failing to transmit.
1995-07-23 20:27:48 +00:00
a8ce47fa44
Remove extra spls in el_init().
1995-07-23 20:11:55 +00:00
90da0e3a99
Kill return values in egstart().
1995-07-23 19:45:42 +00:00
3d1d0d928b
Update prototypes.
1995-07-23 17:57:39 +00:00
a16702ce45
Various:
...
* Fix ugly looping constructs.
* Add a missing splx().
* Eliminate sc_pktbuf.
1995-07-23 17:50:56 +00:00
8593f3a607
Recode elread() and elget() like other drivers.
1995-07-23 17:05:26 +00:00
a1a31f853c
Fix pasto.
1995-07-23 16:43:40 +00:00
9c26c4da18
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:42:49 +00:00
465cfd15f0
Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set.
1995-07-23 16:32:33 +00:00
693043d786
GUS audio driver from John Kohl.
1995-07-19 19:58:09 +00:00
880567e771
fix from Onno van der Linden for large-file read timeouts on double-speed
...
drives. A different read command must be used on double-speed drives.
It boggles my mind that people could design hardware this stupid.
1995-07-10 01:27:24 +00:00
e574814605
insert missing call to splx() when {aha,bt}_send_mbo() returns null.
...
from enami@sys.ptg.sony.co.jp .
1995-07-08 00:34:16 +00:00
4b4b3ee81a
Cleanup
1995-07-07 02:19:48 +00:00
dd3d2e28ed
Setup irq correctly (PR#1179)
1995-07-07 02:15:12 +00:00
0bdd4aa7c2
add support for cs4231
1995-07-07 02:11:45 +00:00
9624704e02
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-05 02:32:53 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
eb99dcc09a
Fix a condition where ttywait() wouldn't be woken up. Also, short-circuit
...
the case of no pending input in compoll().
1995-07-04 06:47:18 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
bc9de32349
make dump stubs consistent
1995-06-26 05:34:44 +00:00
2a8d6461a8
implement new-style block device dump routine if __BDEVSW_DUMP_OLD_TYPE
...
not defined, otherwise use an "not implemented" stub.
1995-06-26 05:16:55 +00:00
7491d6cbe5
if subdevices specified with wildcarded unit number, config_attach()
...
can change the cf_unit, so save it before attach and use saved value.
1995-06-26 04:08:04 +00:00
d9fc8ef092
Remove check for if_addrlist == 0; if_attach() always puts one address on
...
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
e6c81430d2
Add missing `break;'s.
1995-06-09 18:09:27 +00:00
da5b5dfa63
make match/attach routines and cfdriver struct mi
1995-06-07 06:46:04 +00:00
5a29222f9c
prototype isascan, spacing
1995-06-07 06:45:44 +00:00
4bfd7749ad
Various:
...
* Check for CTS in the correct register.
* Only do a selwakeup() if we output something.
* Don't make assumptions about what TTYDISC does.
1995-06-05 19:08:09 +00:00
5b37a8fded
Handle BREAK correctly when not entering DDB.
1995-06-04 20:50:14 +00:00
38847d04c0
Add an input FIFO, and fix several flow control problems. Based on code from
...
Felix A. Croes.
1995-06-04 20:39:22 +00:00
d045544ebd
Changed ns82450 to ns8250 and dropped ns82550 from probe console messages.
1995-06-01 21:26:51 +00:00
488bc82ac3
Fix multicast filter calculation.
1995-05-28 11:29:46 +00:00
addaff473b
Only use the `no pending interrupt' bit in the IIR; the other bits
...
are too unreliable on clone chips.
1995-05-28 03:26:37 +00:00
3ebc44f6e1
isa softc structs are larger than 'struct device'
1995-05-17 02:07:03 +00:00
c821cb684a
(1) conditionalize debugger usage in comeint with DDB, not COMCONSOLE;
...
latter would lead to undefined symbols if DDB not defined.
(2) check for break on console, and therefore debugger entry (if ddb
in kernel) earlier, so that the device doesn't need to be open.
(3) return immediately after breaking into the debugger in comeint().
(4) only do the normal character input routine in comintr if receive
mask yeilds _EXACLTY_ LSR_RXRDY. if there's only a receive
error, or there's a receive error _and_ a received character,
do comeint().
(former two by me. latter two from Bob Baron <rvb@cs.cmu.edu>.)
1995-05-12 17:54:41 +00:00
8742c18c06
Update for slightly modified ARP handling.
1995-05-10 14:04:14 +00:00
c68110e043
Remove strings
1995-05-08 22:01:34 +00:00
05f27a97ce
Fix holes in device index space. PR#1028
1995-05-08 17:28:51 +00:00
1e0c08b206
uncomment cy driver spec; i386 conf.c needs the header file.
1995-05-03 17:09:28 +00:00
825d2fee22
Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
...
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup. Needs more work.
1995-05-01 02:47:07 +00:00
03e77f5565
Tweak the output routine for slightly better performance.
1995-05-01 02:39:30 +00:00
c9319ad5c4
<break> --> ddb if defined(comconsole).
...
(if you have a serial console and you hit break, you get ddb).
1995-04-28 00:34:08 +00:00
686da9ddb7
copyright foo.
1995-04-27 14:50:58 +00:00
6bb0f284d0
Turn off some debugging code by default.
1995-04-27 01:46:47 +00:00
1f4378da60
Fix nits from Mike Long <mike.long@analog.com> PR#996
1995-04-26 21:45:57 +00:00
cb856a9a4d
Watchdog now takes an int, not a short.
1995-04-19 22:42:51 +00:00
9e28a35469
Fix thinko in previous change.
1995-04-19 22:04:33 +00:00
53d73c77a5
Garbage collect #includes.
1995-04-19 19:10:35 +00:00
4c28b7cb87
Change `needs-count' to `needs-flag'.
1995-04-19 19:02:54 +00:00
e1315808a7
Implement comtty().
1995-04-19 18:59:27 +00:00
496acd4619
Correct a couple of things, and add a `fe' device.
1995-04-19 02:11:10 +00:00
800b1f371a
Fix obvious bug in reading from SB_MIC_PORT.
1995-04-17 23:48:06 +00:00
15552a0e17
if_le conflicts with the Alpha; move description back to i386
1995-04-17 20:23:32 +00:00
af67271a66
try to actually (gasp!) describe the drivers.
1995-04-17 17:54:15 +00:00
d61eaf6f6d
ISA config.new files description.
1995-04-17 16:58:30 +00:00
982230db44
update for new locations
1995-04-17 15:48:20 +00:00
8a640328ed
clean up several ISA device interfaces: autoconfiguration, header
...
inclusion, and interrupt configuration. more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
04e937dcbd
Don't boundary check I/O to the `raw' partition.
1995-04-15 05:01:26 +00:00
c7a7d5c262
Sync with the rest of the world.
1995-04-11 05:10:20 +00:00
8d8af964a7
Move NIC register definitions to a global location.
1995-04-11 04:45:26 +00:00
b703c76655
Update for if.h. Define helper macros for accessing NIC registers. Optimize
...
edrint() a little more.
1995-04-11 04:38:42 +00:00
70839d3b04
Change start and watchdog return values to void.
1995-04-10 18:21:42 +00:00
68c8c80929
kernel_pmap --> pmap_kernel()
1995-04-10 16:48:27 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
95c5c4f79f
Most of the console functions return void. Also change interrupt logic
...
slightly.
1995-04-10 01:05:55 +00:00
87d43afd46
Clean up to match common code, and fix a typo.
1995-04-07 22:27:42 +00:00
0e67f2a78e
Rename a few constants to match the chip documentation.
1995-04-04 01:59:28 +00:00
13ac06ec6a
More debugging printf()s, from Rafal Boni.
1995-04-04 01:44:23 +00:00
c04ae31e95
Prototype iexmit().
1995-04-03 21:22:37 +00:00
9085715229
Some pseudo-random cleanup, and try to start transmitting packets quicker.
1995-04-03 21:17:13 +00:00
7e2dabf972
Add a missing unlock.
1995-04-01 10:29:41 +00:00
508897dfcc
Insert a missing unlock.
1995-04-01 10:27:56 +00:00
03e3548ec7
Change the locking protocol to match other drivers.
1995-04-01 08:45:33 +00:00
5ef3b8b957
Always load the TOC. Turn off the TOC bit in the mode register so the busy
...
light goes off.
1995-04-01 08:40:11 +00:00
e17c63cee6
Revamp the locking mechanism slightly. Update some outdated comments, and add
...
a few new ones.
1995-03-29 23:36:27 +00:00
0884490297
KERNEL -> _KERNEL.
1995-03-29 21:56:46 +00:00
71ab4ed9dc
KERNEL -> _KERNEL
1995-03-28 18:13:48 +00:00
aff93b44b4
Remove unused variable.
1995-03-27 21:44:11 +00:00
657ddd6fde
Remove a tiny bit of redundant code.
1995-03-27 18:08:34 +00:00
0a3d4f358a
It's not necessary to do a GETSTAT before each read.
1995-03-27 16:48:45 +00:00
c61cb27f9c
Small garbage collection, and turn off debugging info by default.
1995-03-27 16:04:07 +00:00
306af9bd89
Largely rewritten by me, with some input from Dave Burgess. Implement most of
...
the CDIOC* calls correctly, improve performance by 10x when interrupts work,
and implement the same generic disk framework as other drivers.
Needs some more work.
1995-03-27 15:45:20 +00:00
7c04233887
KERNEL -> _KERNEL
1995-03-26 20:23:52 +00:00
b51403f60d
Remove the write protect check altogether, and rely on the drive to do it.
1995-03-25 19:45:18 +00:00
ff6c206c3f
Use void* rather than caddr_t in many places.
1995-03-25 00:00:53 +00:00
06d0a67a07
Check for read-only media in open(), not write().
1995-03-23 12:11:07 +00:00
02df08a47e
Allow DIOCWDINFO even if label is not `writable'.
1995-03-23 11:33:18 +00:00
331f0252c6
Fix probing of slave devices and remove unneeded ffs()'s
1995-03-21 14:05:28 +00:00
8193ffc379
Add support for PAS 16 basic
1995-03-15 18:45:58 +00:00
af46d07f24
fix compilation error. don't bother checking for IRQ2
1995-03-15 16:43:09 +00:00
36fa07bde5
Fixes defect port-i386/860 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. Kernel will not link with only ProAudio Spectrum driver
specified.
1995-03-14 18:43:19 +00:00
f3226ad49e
Fixes defect port-i386/864 from John Woods (jfw@jfwhome.funhouse.com) with
...
supplied patch. pas.c doesn't recognize ProAudio Spectrum 16 Basic card.
1995-03-14 18:41:36 +00:00
37c67f3481
Turn off two diagnostic printfs by default.
1995-03-14 02:35:11 +00:00
7ce1465911
Fix SB8 playback. From David Gluss <david@pure.com>
1995-03-13 14:37:12 +00:00
1c9582b63e
Add IRQ 9 as a valid IRQ
1995-03-13 14:29:11 +00:00
83fffa3985
Cleanup for SB16 (From Jan Sparud)
1995-03-08 18:27:35 +00:00
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
mycroft