is for "standard PC i/o stuff" at known and constant locations, e.g. when
multi-io chips are used on non-ISA mainboards.
Implement drsupio.c, the DraCo version of this.
Attach the generic com.c to this bus.
Remove the old drcom hack.
Currently, this is only kind of a wrapper around the *_sicallback() function
family. This way, we'll only break the new driver if it doesn't work.
After more drivers are converted, we'll change it to be the other way round.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
two DMA channels to do e.g. full-duplex. This allows
a way of specifying the second channel in a sane way.
THIS IS TEMPORARY. The drq2 locator will go away when
the locator system has been changed to allow multiple
values per locator.
device memory mapping cacheable/non-cacheable:
- PG_N doesn't exist on the 386.
- pmap_changebit() only deals with managed pages.
Basically, calling it is unnecessary, and never did anything. Pointed
out by Chuck Cranor, and further discussed with Frank van der Linden.
Also, add a comment about why we don't mark pages non-cacheable in
_bus_dmamem_map().
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
Delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right. (not really needed, but for
consistency with pccons and serial consoles)
Comment out unused pccnprobe() and pccninit().
XXX I didn't use "#if PCVT_NETBSD > ???" anymore, nor separated from
FreeBSD. The driver is not centrally maintained anyway.
packets. It's not clear whether latency will be affected much. It could be.
However, for the time being, getting full rates out of HIPPI or SCSI are what
interests us at NASA, so we'll hew to this bias.
* make map and alloc take 'flags' rather than 'cacheable,' for
more flexibility.
* rename BUS_BARRIER_* to BUS_SPACE_BARRIER_*, for consistency.
* rename bus_space_copy_* to bus_space_copy_region_* and make their
defns match the updated spec.
Backward compatibility is provided by defining __BUS_SPACE_COMPAT_OLDDEFS,
which is currently defined by default.
- Add entries for the LC520, Color Classic, and PB150 to intvid_info[].
- Make the PB150 a Duo-class machine, as it seems to work better this way.
Now that we're doing the latter, it points out something I missed a long
time ago when I added Duo support: CLASSDUO was being ignored in
mac68k_set_io_offsets().
PowerBook 150 changes and bug fix provided by Dave Huang <khym@bga.com>
in PR 3970.
anymore). This makes the code cleaner (no more bus tag guessing in the
serial console driver) and it allows to share code with KGDB port
initialization.
The console device is now given as string ("pc", "com0".."com3").
Modelled after alpha port.
Compute CPU speed(MHz) and loop multiplier for DELAY() based on
counting empty loop between mcclock ticks. New global: cpu_mhz.
Change pmax/pmax/machdep.c to build baseboard model names from cpu_mhz.
Set 'cpuspeed' for more realistic DELAY() on mips3 models.
Mips CPU constants, testing, and calibration from D. Sean Davidson
<davidson@zk3.dec.com> and Simon Burge <simonb@telstra.com.au>.
* prototype and definition for pmap_activate(p). Updates the segtab,
and changes the active ASID if p == curproc.
* Make reserved fixed-address (UADDR) kernelstack PTEs global,
so we still have a kernel stack after pmap_activate() on curproc.
* make KSEG2 mappings for p_addr global (see above.)
Seems to detune contextswitch and NTP resolution (by 60 ms), but
thepmap_activate() interface is mandatory. Needs more thought.
keys on a pccons console keyboard.
submitted in PR 899 by Alistair G. Crooks
Note that I only did this for the US type keyboard maps.
This and all other such options should be documented, and perhaps
rennamed with consistant PCCONS_ prefixes.
o option DISPLAY_ISO8859 enables the display of iso-latin1
character set (instead of the IBM page code 437)
o option FRENCH_KBD, GERMAN_KBD or NORVEGIAN_KBD implement
support for national keyboards (implies DISPLAY_ISO8859).
Originally supplied in PR #1529
2) Add option PCCONS_REAL_BS which (for US keyboards only) forces
backspace to really be backspace and not delete. Intended to close
PR #2264 submitted by Greg Woods. He wanted it changed for everyone
-- I thought adding a kernel compile option was friendlier.
Note: Both of these sets of options really should be documented in an
i386 specific version of options(4).
(address error faults), as well as other reported problems:
- Simplify grfmv_phys() to work like grfiv_phys(), and eliminate the
second argument to both, as we don't use it anyway.
- Handle fbbase and fboff consistently throughout. Closes PR 3862.
- Eliminate grfaddr() by pulling it into grfmmap(), which is the
only place it was used, previously.
- grfmap() now gets the physical address of the framebuffer from
the appropriate driver, rather than try to compute it by itself.
Be careful with aligning the base to a page address and increase
the length of the mapped region appropriately. Closes PR 2867.
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
Removed some un-necessary cache synchronisations.
Call the cpu_sleep() function in an infinite loop in halt().
Removed the long dead swap specifier from rc7500 initarm().
the only timings we know are the ones inherited from the boot and the
drivers that will attach to the bus may change these.
Use the IS_PODULE macro for checking manufacturer and podule id's
against attach args.
PROFILE_ASM are defined.
Added missing .data directive prior to the curpcb declaration.
Fixed the calling of the cpu sleep function in idle(). The sleep function
takes a single argument which is the sleep mode. This is currently unused
but 0 should be passed for future compatibility.
sense code for zero and if found repeat the request sense. This solves
a bug in the sbic driver when accessing JAZ drives that results in
faulty sense data being returned following a transfer. A retry returns
the correct information.
This is probably showing up a more fundemental bug in the sbic driver
and will probably have to wait for a complete overhaul of the sbic
driver (planned) for a perfect fix.
Fix supplied by Rob Black <r.black@ic.ac.uk>
shift value thus making register more flexible.
Remove the absolute shift of 2 in all the podule read/write routines and
use the tag cookie (passed in r0) as the shift value.
register shift value.
For the podulebus_bs_tag structure set the shift to 2 (the current
hardcoded value in the actual read/write routines).
Use the cookie to provide the register shift in podulebus_subregion().
MMU is not yet initialized. This behaviour is necessary when probing
for the machine type - because we need the type before we can setup the
tables....
- Add grfvideo_mode->disp_flags to select interlace, doublescan,
sync-on-green and horizontal/vertical sync polarity.
- Add some constants for grfvideo_mode->disp_flags.
This fixes a wrong output from grfconfig /dev/grf[23]
- changes for the grfconfig interface:
- Remove gv->hblank_stop and gv->vblank_stop.
- Only print doublescan and interlace flags. Horizontal/vertical sync
polarities are not yet supported and sync-on-green will never be
supported.
- Remove gv->{hblank_stop,vblank_stop} and use the other grfvideo_mode
values to set ba->data.
- Add gv->disp_flags to select interlace.
- Not yet supported are: doublescan, sync-on-green and the horizontal/vertical
sync polarity.
This makes it possible to use xfree values for grfconfig.
- changes for the grfconfig interface:
- Remove gv->{hblank_stop,vblank_stop} and calculate HBE and VBE from
gv->{htotal,vtotal}.
- Add support for gv->disp_flags to select interlace, doublescan and
horizontal/vertical sync polarity.
- Return EINVAL for gv->disp_flags and sync-on-green.
This makes it possible to use xfree values for grfconfig.
- Use interrrupt #6 instead of #2. #6 is the default interrupt and there
seems to be a problem with Cyberstorm 060 and #2.
- Set the interrupt register before enabling the interrupt.
- GC M2INS
- minor cleanup
- Switch from +hsync/+vsync to -hsync/-vsync.
- changes for the grfconfig interface:
- Remove gv->{hblank_stop,vblank_stop} and calculate HBE and VBE from
gv->{htotal,vtotal}.
- Add support for gv->disp_flags to select interlace, doublescan and
horizontal/vertical sync polarity.
- Return EINVAL for gv->disp_flags and sync-on-green.
This makes it possible to use xfree values for grfconfig.
the locators.
In wdcprobe_internal() set the WDCF_32BIT flag if the data32 io handle
is set.
All transfers to and from the data register now check for softc flags
to see if 32 bit transfers are enabled i.e. reading drive parameters
and doing a dump will use 32 bit transfers as well.
of cache-index incompatible virtual mappings for a physical page may be
required for hardware without secondary (level 2) cache to detect and
correct virtual coherency problems. I'm not sure this is really needed
anymore, since pmap_prefer() took care of of the cache-index
incompatible mappings that I have seen. Count the times a page is
cache inhibited in enter_stats if DEBUG.
Wait for memory instead of panic() on failure to allocate a page for the
segtab or segmap [from OpenBSD arc port]. Also check for malloc()
failure on allocation of a new pv entry and panic().
Increment resident_count when adding a new page to a pmap [also from
OpenBSD]. Process resident size is now valid.
cache flush operations required on a virtually-indexed, physically-tagged
mips3 with no L2 cache to provide cache-coherence exceptions.
(Similar to what's needed with a virtually-indexed, virtually-tagged cache.)
In the probe routines check the mainbus attach args mb_iobase field
to verify that the iobase did not default as an iobase address needs
to be specifically specified.
they have different podule ID's.
Always attach the driver even if it appears to fail the tx test as there
appear to be a collection of cards around that will fail this tx test but
will actually work ok - This problem needs further investigation.
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
faults. Use curpcb, which always points to the current pcb. If curproc
was NULL when the kernel faulted, the trap handling would fault recursively
and the kernel stack would overflow.
at least 8-). Add structure offssets for structure members, so we
know how much space we're using. Make the version in the bootinfo
structure be a u_long, so there's no implicit padding in the structure.
Add a few more pointers to the bootinfo v1 structure, which will all
be set to NULL for now.
- Allow BUGCHK and BPT instruction faults in kernel mode if DDB is enabled,
since they are used to invoke the debugger.
- Add a comment about how we'd like to invoke DDB on a trap panic condition,
in a perfect world.
pointer to boot program's bootinfo structure. If the bootinfo magic
matches, save a copy of the bootinfo structure, and use it to determine
booted kernel name, the boot flags, and the location of the kernel symbol
table. If the magic number does not match, revert to the old method
of finding this information (sans symbol table info).
- Add some additonal DDB glue.
was sent to developers, but will eventually become a man page or
something), i noticed a few in various names:
(1) _map and _alloc should take a flags argument, rather than a
'cacheable' boolean.
(2) BUS_BARRIER_* flags should be BUS_SPACE_BARRIER_*.
(3) bus_space_copy_* should be bus_space_copy_region_* for consistency
with other region ops.
Fix all of these (in a backward-compatible way, at least for now). Redefine
internal usees of those names to use the new names. Also, while at it,
clean up the copy functions (remove unnecessary variables) and make sure
that they and other functions conform to the spec.
don't assume that the names/values to be put into defines in assym.h
start with the first .ascii in the assembler file; look for the array
start symbol, instead.
by implementing entirely in assembly. This saves some 6 bytes on all MPUs,
and about 8 cycles on the 030.
Now that it's optimized, define spltty() in terms of _splraise() so that
we don't inadvertantly lower the SPL.
Has unrolled loop for aligned-to-aligned copy.
Notes:
1. this code tuned for DEC 5000/200. ioasic decstations do more unaligned
copies. Better than old non-unrolled loop, but could be improved.
2. Undoes changes made for MIPS3 with comment implying an r4000 TLB bug.
We can't reproduce this on 5000/150 (jonathan) or 5000/50 (mhitch).
Calls to previous bcopy with a bad address show similar symptoms,
reporting a trap in bcopy() after bcopy() has returned. Same thing??
Needs re-checking on an r4000 with no L2 cache.
is