aca6a2e6da
Renamed these files.
1996-04-25 22:26:52 +00:00
95101e1310
Renamed these files.
1996-04-25 22:02:58 +00:00
a0bca74134
Remove some now-useless code.
1996-04-25 21:18:04 +00:00
5282131d76
Add ie1, appropriate for EtherExpress support
1996-04-25 20:14:13 +00:00
09407a4201
Document the VM86 option by adding it to the GENERIC* kernel config
...
files. Note, the option is disabled by default (comment out). This
is meant as an example for others.
1996-04-25 18:59:14 +00:00
18fd76201e
We don't need to enforce the MAX_DMA_SIZE limit in dma_alloc();
...
this is handled properly by sbc_drq_intr() already.
1996-04-25 14:40:26 +00:00
f1f45fae7c
Emulate the INTO instruction.
1996-04-25 13:50:21 +00:00
2e936aa8ff
- Remove several hacks that didn't do much but waste cycles.
...
- Disable interrupt-driven PDMA when writing (use polled PDMA instead).
- Be more careful about when to flag a transfer as completed.
The result of these changes is that interrupt-driven PDMA works well
enough to bring the system up.
1996-04-25 06:18:41 +00:00
f726c602da
another prototyp cleanup
1996-04-25 05:57:38 +00:00
72e70ce045
update for present reality
1996-04-25 04:28:04 +00:00
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
b8a3e738c6
Make the minimum function signature for this file to compile with the latest
...
changes to vm_extern.h.
1996-04-25 01:15:41 +00:00
3e07e4275a
clean up and improve instructions, update to reflect current reality.
1996-04-25 00:11:09 +00:00
424ce7590a
Sync with prototype changes
1996-04-24 18:02:26 +00:00
09916f81d3
Make the Amiga mainboard mice, which used to be pseudo-devices, real devices.
...
(We want to support Amigoids without this interface in the near future.)
1996-04-24 11:41:16 +00:00
463c504dc7
The prototyp for cpu_set_kpc is now in sys/systm.h
1996-04-23 22:54:49 +00:00
112379ef29
Added some ifdef's for RETINA_SPEED_HACK
...
Argh, why is a fuction from the RetinaZ2 console driver in the console
driver for the RetinaZ3 ? Fixed.
Fixed some warnings from -Wall if you don't use -DDEBUG
1996-04-23 22:53:05 +00:00
1ca9fb10a0
The prototyp of cpu_coredump is now in sys/signalvar.h
...
Added an ifdef DEBUG for struct phys_segs
1996-04-23 22:46:39 +00:00
646acc51d0
Map the pixels explicitly on the VME32 bus.
1996-04-23 19:34:05 +00:00
ee8f3dc1b8
Turn delay() into a calibrated loop. It's more accurate and compiles into
...
a `leaf' routine, avoiding unexpected large delays by overflowing the
register windows.
1996-04-23 19:25:25 +00:00
0536f1591a
Protect two critical lines of ser.c with splser(). Without this, a
...
race condition exists which makes the internal serial drop incoming
characters under heavy load.
1996-04-23 17:03:04 +00:00
5b809af42a
Changed the speed calculations of the Amiga-builtin-serial driver to
...
allow any baudrate the hardware allows, and to forbid two baudrates
(50 and 75) which the hardware does NOT support but which the old
speed conversion table pretended to support.
1996-04-23 16:38:32 +00:00
edda199ab0
patch from: Steve Woodford <steve@mctavish.demon.co.uk>
...
fixes the following problems:
- Timeout on START/STOP unit command (ie. when spinning up the drive)
Side effect of this fix is to reduce the busy-wait time in CMD phase.
- Occasionally, the driver would lose an SBIC interrupt, especially when
a tape drive was re-selecting on a busy SCSI bus.
1996-04-23 16:32:54 +00:00
7bc9a18250
prototyping cleanups
1996-04-23 15:26:06 +00:00
58a104f26a
pal_halt doesn't return; give it a noreturn attribute.
...
Mark assembly that uses 'mb' as clobbering memory (pthreads does, and
it can't hurt).
1996-04-23 15:24:09 +00:00
5437babf6c
prom_halt doesn't return; give it a noreturn attribute
1996-04-23 15:23:18 +00:00
27c9c12e72
Clean up sbc_drq_intr() a bit; also, be more paranoid about size of transfer.
1996-04-23 14:20:28 +00:00
59cdf4331e
clean up some, and use new sioreg.h
1996-04-23 14:15:55 +00:00
8253c155fe
hanges from Trevor Mendez <tmendez@bbn.com> to use new sioreg.h
...
header. Also, I moved the LCA_SIO_DEVICE definition higher up in the
file.
1996-04-23 14:15:28 +00:00
84da7b5f97
Intel 82378 System I/O (SIO) Chip register defintions, cleaned up a
...
bit from a version supplied by Trevor Mendez <tmendez@bbn.com>.
1996-04-23 14:10:53 +00:00
e9bbf69ff6
Changes from Trevor Mendez <tmendez@bbn.com> to add definitions of a
...
couple of registers useful for debugging.
1996-04-23 14:03:46 +00:00
fea5e372e6
Corrections from hardware manual, from Trevor Mendez <tmendez@bbn.com>.
...
Adds comments and sets IOC_CONF correctly (it's write-only!).
1996-04-23 14:00:53 +00:00
d8adbe4247
Changes from Trevor Mendez <tmendez@bbn.com> to make this compile
...
with NWSCONS == 0.
1996-04-23 13:57:55 +00:00
0895b8dd09
Changes from Trevor Mendez <tmendez@bbn.com> to print 0x's before hex
...
numbers when panic()ing because of a machine check, for sanity.
1996-04-23 13:54:32 +00:00
df8c6afda1
Ignore joystick packages when running in 3b. emulation mode.
1996-04-23 11:02:01 +00:00
d9b8ec83bd
Ups, I removed a label which should go into a ifdef
1996-04-23 05:14:40 +00:00
509ace1016
Handle internal video interrupts on RBV-based machines differently so
...
that Ethernet cards have a chance to work. In particular, this change
has been tested on the IIci, IIsi, and LCIII. The crucial info behind
this code was the result of a lot of work by Julian Bean.
1996-04-23 03:53:26 +00:00
6b768c677a
Now that we have lehwinit() for the Sun4m, make sure that we wait 20ms
...
after changing the cable type, as specified in the chip documentation.
Also, sanity-check that sc_dma is valid in case a Sun4m ever exists without
a ledma.
1996-04-22 03:57:29 +00:00
90bc31d478
remove include of <sys/cpu.h>
1996-04-22 02:50:20 +00:00
a897ec996a
Remove dependency on <sys/cpu.h>
1996-04-22 02:42:00 +00:00
bebf990150
Oops the name of the UTP/AUI bit changed under me...
1996-04-22 02:39:49 +00:00
5253b892e9
Add a hardware dependent initialization function lehwinit()
...
to support selecting UTP media on sun4m
1996-04-22 02:37:10 +00:00
709298a10a
- Changed Sun4m DMA chip support to detect and use maximum available SBus
...
burst size when transferring data.
- Changed ledma attach code to pay attention to the PROM's notion of what
cable type is being used. Note that this patch does not fix the problem
recently discussed on port-sparc; in most cases the PROM doesn't know
what cable type is being used. The default is now TP rather than AUI,
though. A complete fix is forthcoming.
1996-04-22 02:34:53 +00:00
78403e6c0c
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:25:54 +00:00
a922ebfb8b
- Cleanup for -Wall and -Wstrict-prototypes
1996-04-21 21:13:16 +00:00
974e9f6e22
- Cleanup for -Wall and -Wstrict-prototypes
...
- Added support for multiple floppy drives
- CyberVision64:
- has now a real console mode
- another bugfix for boards with the new S3 chip
- Ariadne:
- fixed crashes with aeput (mbuf failure)
1996-04-21 21:10:48 +00:00
dbf4b28b74
Added support for multiple floppy drives
...
Added entry for the emplant scsi driver
1996-04-21 21:09:40 +00:00
db6f1b1304
Cleanup for -Wall and -Wstrict-prototypes
1996-04-21 21:06:46 +00:00
585e1044c8
aic0 belongs at IRQ 11 (the card default); the entry was apparently
...
changed to 12 by mistake when GENERIC was created after NetBSD 1.0.
Change confirmed by Perry and several others. Fixes PR 1878.
1996-04-21 20:55:25 +00:00
18dd6b0909
Prototypes.
1996-04-19 20:35:31 +00:00
f4e4aeed3c
Check for curproc being NULL in pmap_remove().
1996-04-19 20:33:01 +00:00
d4d9deb9d7
Added facility to dump the SCSI information from the asc driver.
1996-04-19 20:15:36 +00:00
e59df39537
Added asc_dump() function to dump the information gathered by the sbic
...
driver.
1996-04-19 20:13:56 +00:00
0d0b8de238
Code fixes to get the sbic debugging code to compile.
1996-04-19 20:09:50 +00:00
0e486086a5
Added information of the iic and rtc devices.
1996-04-19 20:04:29 +00:00
7bbb222f40
Raise the spl level to spltty while manipulating the virtual console
...
linked lists.
A couple of minor code cleanups.
1996-04-19 20:03:37 +00:00
c771d9f6c3
Config files updated for the new iic and rtc devices.
1996-04-19 20:00:41 +00:00
584d8e9b80
Updated to reflect removal of iic and rtc code from arm32/ and the
...
creataion of the iic and rtc devices.
1996-04-19 19:57:49 +00:00
a65bd66705
Header file for IIC structures, prototypes and ioctls.
1996-04-19 19:52:46 +00:00
e51f620a83
Added IIC information for the PCF8583 RTC chip.
...
Added #ifdef guard on rtc prototypes.
1996-04-19 19:51:48 +00:00
0b22968311
Initial commit of iic and rtc devices.
1996-04-19 19:49:03 +00:00
ab4a325e4c
The iic and rtc are now devices and have been rewritten ane moved to the
...
mainbus directory.
1996-04-19 19:43:31 +00:00
11fb5f4ba0
Added configuration information for character devices iic and rtc.
1996-04-19 19:40:29 +00:00
85d47049cc
Don't report time or 'clock has gain ...' message if the base time
...
was 0 in the inittodr() function.
1996-04-19 19:39:17 +00:00
901483b57b
Sigh. Send a trace trap only if we are still in VM86 mode.
1996-04-18 21:21:11 +00:00
15d4e17598
Send a trace trap only if the trace flag is set at the *beginning* of
...
the emulated instruction.
1996-04-18 20:36:35 +00:00
204542255a
After an emulated instruction, check the trace flag and force a trace
...
trap if needed.
1996-04-18 19:58:09 +00:00
442dec5d53
new driver: SCSI for VME147
...
contributed by: Steve Woodford <steve@mctavish.demon.co.uk>
this driver is based on the amiga sbic/33C93 driver. Steve has
cleaned it up and fixed lots of bugs. Note that the original driver
used features which require at least a WD33C93A (the vme147 has the
original WD33C93 chip <no 'A' suffix>). Steve has also written
the DMA routines for the 147 to get things really going. Hardware
scatter-gather DMA and sync. SCSI are not supported (yet). tested
on several disk drives and a tape drive. CD-ROM untested, but
should work.
1996-04-18 18:30:49 +00:00
da32bd7fed
add wdsc, enable FFS, move le
1996-04-18 18:14:32 +00:00
f56be1680c
add wdsc device
1996-04-18 18:07:58 +00:00
a574a3a423
add PCC_ICLEAR
1996-04-18 18:07:08 +00:00
94b120dfa8
add a "delay" function.
...
XXX: assumes vme147 speed. needs to be fixed and sync'd with DELAY.
[will work with jason/hp300 to fix it properly]
1996-04-18 18:06:30 +00:00
dbc3478277
establish a dk_establish() function.
1996-04-18 17:43:04 +00:00
47bf863ac1
Make some of the flag handling clearer. No functional change.
1996-04-18 10:04:32 +00:00
aaed1c2fae
Don't bother to enable alignment checking; nobody uses it and it interferes
...
with VM86 mode.
1996-04-18 09:58:13 +00:00
b3fadef7e0
Yet more prototyping and -Wall fixes.
1996-04-18 08:51:11 +00:00
7a8c8f8a5c
Turn off the alignment check flag when entering a signal handler.
1996-04-18 08:36:20 +00:00
7458364702
Implement the I/O read/write-multiple functions for chipsets
...
that use this file (APECS, LCA, and CIA).
1996-04-18 05:53:04 +00:00
ff0a52ccd9
define bus_io_{read,write}_multi_{1,2,4,8} functions, which read/write
...
multiple values from a single I/O port in to/out of an array of values.
1996-04-18 05:47:29 +00:00
e27e15d0ac
change NLE flag for IOASIC LANCE buffer to NLE_IOASIC, and add comments
1996-04-18 00:59:11 +00:00
03d386daa7
attach le with different attributes, depending on parent (i.e. tc or
...
ioasic), and use those attributes to pull in appropriate files.
le_ioasic now has needs-flag, but le doesn't; the flag is only necessary
on systems configured with IOASIC-attached LANCE chips.
1996-04-18 00:55:15 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
17731baa0d
fix copyrights
1996-04-17 22:22:32 +00:00
69ad2e587b
ioasic doesn't need a flag, and correctly conditionalize inclusion of
...
machines' tc configuration files.
1996-04-17 22:08:29 +00:00
71c7924099
clean up clock handling: clock drivers are now seperate from the
...
chip-independent clock code. 'clock' has been renamed 'mcclock' 'clock'
has been renamed 'mcclock' (since it's a driver for that particular
clock, and since eventually there may be another clock chip driver),
and now attaches via seperate match/attach functions to both TC and ISA.
This removes a whole lot of #ifdefs...
1996-04-17 22:01:16 +00:00
a5778ae63b
print cpu names slightly differently (number first)
1996-04-17 21:50:56 +00:00
0b0a8bfe15
fix bug in pcivga_erasecols() that would cause garbage to be spit out.
...
other minor style cleanup.
1996-04-17 21:49:58 +00:00
d727565526
fill in the tty window size information, so that standard terminal
...
entries can be used with weird displays.
1996-04-17 21:48:30 +00:00
60add3dea0
update for current state
1996-04-15 19:00:46 +00:00
1bd905d710
include <sys/termios.h> to make <dev/isa/comvar.h> happy, and set the
...
serial ('com') console bit size and parity to be "cs8 -parenb".
1996-04-15 18:58:20 +00:00
e0afa4e4f9
Don't turn off the trace flag here; let sendsig() do it.
...
If in Linux emulation, send SIGSEGV for protection faults, rather than SIGBUS.
1996-04-15 00:20:32 +00:00
274c2bd80d
Add a prototype for generic_intr_establish(), the bus-independent
...
pmax interrupt-establish function.
1996-04-14 00:58:21 +00:00
28986d8126
Add cdev_decl() declarations for the "dtop", "fb" , and "rcons" drivers.
1996-04-14 00:56:59 +00:00
4a04d76c65
Fix the definition of TC_PHYS_TO_UNCACHED(addr): make it change a mips
...
kernel addressed to uncached space.
Add prototypes for pmax-specific TC functions used in probing for
a framebuffer console.
1996-04-14 00:55:19 +00:00
ff35ddbb2a
Update makeoptions to include 881 support
1996-04-13 19:12:46 +00:00
a0b7376b16
Add prototype and fix return type of blink() so "options BLINK" works
...
with -Wall -Werror
1996-04-13 17:40:03 +00:00
98d92322b1
update for recent config changes: xxcd -> xx_cd
1996-04-13 00:31:37 +00:00
cad6c2d600
capitalize IRQ names here, to match what's reported on boot
1996-04-13 00:25:24 +00:00
21ac0b2a36
update for new ISA/EISA/PCI/'bus' interfaces. Untested
1996-04-13 00:24:30 +00:00
161623e54e
add (untested) support for EISA busses hanging off of PCEBs.
1996-04-13 00:23:34 +00:00
f32c94e82c
note that these IRQs are ISA IRQs
1996-04-13 00:22:58 +00:00
c0b2b5595c
Replace with completely new version derived from APECS code. No serious
...
bugs to fix (that i know of), just doing it that way was easiest.
1996-04-12 23:37:10 +00:00
56a6e33bb6
"Do over." Throw the old file away, replace it with a version hacked
...
from the current apecs_pci.c. This new version hopefully works for
the same sets of devices that that previous one did, and hopefully
will work for multi-function devices and for secondary PCI busses as
well. (looking at the code, there was no way the old one could have!)
1996-04-12 23:27:05 +00:00
435c2f935e
config first, so there's someplace to cd to.
1996-04-12 20:27:42 +00:00
ae42d9fdbd
oops; forgot to remove a line of debugging/testing code
1996-04-12 20:22:14 +00:00
6e40f439fc
Part of restructuring done for 3-button mouse support.
1996-04-12 19:55:28 +00:00
4d91dc7c18
pull in ieeefp.h from m68k common area
1996-04-12 18:38:00 +00:00
c7a59b578d
sync with sun3 version
1996-04-12 18:35:40 +00:00
4420159d4c
fix warning from gcc
1996-04-12 18:33:59 +00:00
f0d175fd22
Commit version that _really_ has only the innocuous fixes in the
...
last CVS message.
Possible uninitialized use of variables in the SII state machine,
requiring more thought, are still present.
1996-04-12 18:22:35 +00:00
f6897c8eb6
fixes for -Wall -Wmissing-prototypes:
...
pass 1 over pmax SII driver: change "MachEmptyWriteBuffer()" to
"wbflush()", add prototyped forward declarations.
1996-04-12 18:15:23 +00:00
658385632c
Prototyping.
1996-04-12 09:05:14 +00:00
e7ad591a96
misc.c ->stalloc.c
1996-04-12 08:57:43 +00:00
7a18bb9542
Just give them more descriptive names.
1996-04-12 08:46:44 +00:00
ad790f628e
Turn off the trace flag when delivering a signal.
1996-04-12 08:44:35 +00:00
9402dcae81
Add 3-button mouse support.
1996-04-12 08:39:22 +00:00
e4a9d09efb
Add 3-button mouse support.
1996-04-12 08:37:03 +00:00
576c769331
clean up copyrights and RCS IDs
1996-04-12 06:07:05 +00:00
035e9c211e
Use the flag mask in a somewhat more sane fashion.
1996-04-12 05:57:43 +00:00
eb4de32615
Set up and pass isa chipset tag to ISA bus, when attaching.
...
Should do the same for EISA, when that support is finished.
1996-04-12 05:43:02 +00:00
98c183ff49
remove (hack) version of isa_intr_establish()
1996-04-12 05:41:50 +00:00
69d8f0e09a
define all of the appropriate functions, as indirections through
...
a function switch.
1996-04-12 05:39:02 +00:00
0da2610536
this file is no longer used
1996-04-12 05:35:51 +00:00
931ec3829c
partially update for new ISA/EISA/PCI and 'bus' interfaces. not yet
...
complete, or tested.
1996-04-12 04:40:49 +00:00
c6af4505f1
implement 'bus' functions for the CIA chipset.
1996-04-12 04:40:01 +00:00
647469cfbc
update for new ISA/EISA/PCI and 'bus' interfaces.
1996-04-12 04:38:33 +00:00
125eefcd67
implement APECS and LCA 'bus' functions, and share them between the
...
two chipsets, since they're the same.
1996-04-12 04:36:12 +00:00
04645aa7ad
chipset 'bus' functions that seem to be common to all host bus
...
adapters that exist in single-CPU systems. APECS, CIA, and LCA
all use this, but with different #defines.
1996-04-12 04:34:59 +00:00
ba7bbf8c30
update for new PCI, etc., interfaces
1996-04-12 04:33:06 +00:00
be813334f8
(mostly) update for new PCI and 'bus' interfaces.
1996-04-12 04:32:10 +00:00
b26a595361
update for new PCI, etc., interfaces.
1996-04-12 04:31:48 +00:00
caa9d61d58
add indirect register definitions.
1996-04-12 04:31:08 +00:00
7b08107723
update for new PCI code, etc. As yet, untested.
1996-04-12 04:30:11 +00:00
f357f1b38a
partially update for new PCI & bus macros. update to deal with new
...
console glue. Split out RAMDAC-specific code into seperate files.
1996-04-12 02:13:09 +00:00
a52d1c3efe
clean up for new ISA and 'bus' code, etc.
1996-04-12 02:11:22 +00:00
c2ca361599
update for new ISA & PCI code, etc.
1996-04-12 02:09:51 +00:00
706b61a9a3
add some sanity checks to avoid lossage when dealing with unmanaged
...
pages, and clean up a little bit.
1996-04-12 02:09:24 +00:00
de1319f259
define delay() here, rather than in clock.c
1996-04-12 02:07:52 +00:00
92c3ba0426
new entries for keyboard, mouse, and parallel printer
1996-04-12 02:07:23 +00:00
99841b9cdd
cast return of phystok0seg() to a caddr_t, to suit uiomove proto
1996-04-12 02:06:21 +00:00
73378c1529
add rpcc entry point
1996-04-12 02:05:48 +00:00
26bf14c6fe
update for new ISA & bus code, and clean a bit
1996-04-12 02:05:14 +00:00
f0a062ba62
replaced by files in ../wscons
1996-04-12 02:02:06 +00:00
89579980e6
this has moved to ../include
1996-04-12 02:01:51 +00:00
7a58e4fe08
"workstation console glue." glass tty code, console emulation,
...
keyboard and mouse interfaces, etc. Mostly grabbed from the sparc,
and adapted and trimmed where appropriate.
1996-04-12 02:00:42 +00:00
607fdc7ab6
(incomplete) machine-dependent ISA definitions.
1996-04-12 01:57:42 +00:00
42362ab7a1
PC timer definitions
1996-04-12 01:54:56 +00:00
da4d801b40
speaker (PIT AUX port) definitions
1996-04-12 01:54:46 +00:00
c032474c02
add CMU copyright notice
1996-04-12 01:54:04 +00:00
7aadd7593f
support for PS/2-style mice
1996-04-12 01:53:06 +00:00
1c35246b36
update for bus.h, add support for X, and provide use of the bell.
1996-04-12 01:52:45 +00:00
0e6af1ab55
keyboard and frame buffer interface include files, grabbed from the
...
sparc with minimal modifications, to make X go. Should really be
trimmed down to include only the relevant information.
1996-04-12 01:45:41 +00:00
b6e9f99e08
TGA reg defns, moved here from ../pci for X. doesn't really belong here
1996-04-12 01:44:23 +00:00
59ca8b07e6
header which defines 'workstation console glue' ioctls
1996-04-12 01:43:06 +00:00
0af73c4da4
alpha sysarch header. right now, only defines (inline) alpha_rpcc()
1996-04-12 01:42:45 +00:00
a37e40ef1b
the Alpha implementation of <machine/intr.h>
1996-04-12 01:42:17 +00:00
84b2d703c7
the Alpha implementation of <machine/bus.h>
1996-04-12 01:39:34 +00:00
b151b7e326
these have moved elsewhere
1996-04-12 01:38:51 +00:00
0e1f086279
add XOPEN constants, clean up
1996-04-12 01:38:25 +00:00
4bdd407757
update copyright
1996-04-12 01:36:51 +00:00
f695b5badd
use jmp, rather than br, in the JMP macro
1996-04-12 01:35:58 +00:00
1d001142a9
don't forget dkcksum.c, now that it's seperate
1996-04-12 01:35:15 +00:00
29fe6c8918
clean up a lot, make work with outline mode, and switch functions:
...
build now builds from scratch, rebuild just runs make.
1996-04-12 01:33:40 +00:00
9e1fc3f99c
kill this; more trouble (for more people) than it was worth
1996-04-12 01:32:54 +00:00
ba87ccc479
update for latest MI TC and SCSI code, and clean up in the face of
...
config changes.
1996-04-12 01:31:43 +00:00
7128b7a114
i no longer can do anything with macallan, so kill its kernel config.
...
However, Jason has a turbochannel alpha, so add its config file.
1996-04-12 01:21:43 +00:00
34e27f0c56
update for present alpha reality:
...
add drivers for ps/2-style mice (on the PC-ish alphas), and for the
workstation console glue code. also, update for config changes, etc.
1996-04-12 01:20:40 +00:00
79e0a8a2b9
update for addition of a machine-dependent cookie as the first argument
...
to isa_intr_{,dis}establish().
1996-04-11 22:15:08 +00:00
5007f5e246
pass a new, machine-dependent cookie, in the ISA bus attach arguments.
...
On the i386, this is always NULL, and is unused.
1996-04-11 22:13:37 +00:00
8f40bb43a8
add an isa_attach_hook() function which currently does nothing, and update
...
isa_intr_establish() and isa_intr_disestablish() to take an opaque cookie
as their (new) first argument.
1996-04-11 22:11:32 +00:00
f3b97d1287
prototype MD functions for use by MI ISA code (isa_attach_hook(),
...
isa_intr_{,dis}establish()) here. Make this file safely includable by
<dev/isa/isavar.h> and by all of the places in the i386 that are currently
including it, which means multiple inclusion protection and a few
otherwise-extraneous 'forward' structure declarations. isa_intr_establish()
and isa_intr_disestablish() now take as their first argument a
machine-dependent cookie of type isa_chipset_tag_t, which is also defined
here.
1996-04-11 22:10:11 +00:00
b3897170bd
Haven't used "options RCONSOLE" for a long time. Update to the new
...
"options RASTERCONSOLE". Noticed by cgd.
1996-04-11 21:54:13 +00:00
e17cddf913
If the power device is configured, don't forget to compile the driver.
...
Also, add some whitespace for readability.
1996-04-11 21:05:42 +00:00
41a08fd254
Include fdc.h, not fd.h, due to change in files.sparc.
1996-04-11 19:20:03 +00:00
c8ab43244b
Actually keep track of the naughty PSL bits.
...
Use VIF, rather than IF, by default, to be compatible with dosemu. XXXX
1996-04-11 10:07:17 +00:00
48643c6605
Export [gs]et_vflags(), and always use them when saving/restoring registers
...
in VM86 mode.
Allow changing of *all* PSL bits in VM86 mode; some applications don't work
right otherwise, and all the nasty bits are virtualized anyway.
Make sure PSL_VIF, PSL_VIP, and PSL_VM don't show up in the user's view of
the PSL.
1996-04-11 07:47:33 +00:00
b61f5e52cd
Set the flag mask earlier.
...
Use SS_ONSTACK, not SA_ONSTACK.
1996-04-11 05:11:03 +00:00
ff8268cfea
Fix a couple of 16-bit extension errors.
1996-04-11 03:21:42 +00:00
c0919485d4
Move some of the SCSI target juggling to autoconf's fake_bootpath() routine.
...
Fix incorrect interpretation of bootpath's val[2] as a SCSI unit.
1996-04-10 20:48:35 +00:00
e4394459a1
`bootdv' is gone. Instead, set the device pointer in the `struct bootpath'
...
that is passed in the attach arguments.
1996-04-10 20:46:05 +00:00
c28fcc3539
Use extra value in `struct bootpath' to describe the PROM's bootpath better.
...
Use the bootpath[] array in setroot() to determine partition info in case
of boot devices of type DV_DISK. Also, precook more SCSI device info in
fake_bootpath() to simplify dk_establish().
1996-04-10 20:40:14 +00:00
5f2d466997
Make room for another `value' in struct bootpath. Drop the global `bootdv'
...
in favour of storing the device pointer in the bootpath[] element corresponding
to the boot device. This also allows the opportunity to get to "intermediate"
devices (e.g. busses) should the need for this ever arise.
1996-04-10 20:33:38 +00:00
f6762bf5cf
Retry calls to the PROM strategy function. Fixes PR# 2145
...
Call prom_iopen only on the first disk_open call, otherwise
only the first file open attempt ever works. Fixes PR# 1726
Both from der Mouse <mouse@Collatz.McRCIM.McGill.EDU>
1996-04-10 18:31:14 +00:00
368824e74c
Fixes for -Wall -Wmissing-prototypes:
...
Add prototypes to (most of) src/sys/arch/pmax/pmax. (The un-protytyped
parts still have pending merges with the Pica port.)
Fix splx() glitches in pmax/clock.c.
Delete old cpu/fpu identification from pmax/autoconf.c, use r4400/r4600/idt
aware code from Pica port, now in mips/mips/mips_machdep.c.
Delete unused multi-CPU autoconfiguration code; NetBSD/pmax does not
support decsystem 5800s anyway.
1996-04-10 17:38:18 +00:00
66e92bbfaf
fixes for -Wall -Wmissing-prototypes:
...
prototype the function-pointer member of the pmax struct pdma.
1996-04-10 17:38:04 +00:00
39917746c1
fixes for -Wall -Wmissing-prototypes:
...
Update the pmax SCSI drivers (rz and tz) to use <machine/conf.h>.
Fix the driver entry points to have the correct signatures -- add
"ioflag" args to read() and write(), add "struct proc *p" arg to
open and close.
Stop using __BDEVSW_DUMP_OLD_TYPE, and update the rzdump and tzdump
entry points to have the correct, MI signatures.
NB: this is just syntactic sugar: both the caller and the dump entry
points ignore the additional args, and do exactly what they did before.
This must be fixed before using dump entry points in non-pmax drivers
(e.g., the MI scsi code).
1996-04-10 16:33:44 +00:00
beaeb261bf
fixes for -Wall -Wmissing-prototypes:
...
add prototyped declarations for the callbacks which add old-style
(4.4bsd/pmax conf.old) SCSI controllers, and which configure SCSI slaves
on such controllers.
rewriting the SII driver to work with the MI scsi would be a better option,
if time were available, and the MI scsi code supported SCSI controllers with
an 8k upper bound on transfers.
1996-04-10 16:27:38 +00:00
68a943bdf6
Create pmax-specific <machine/conf.h>, with prototyped declarations
...
for the cdevsw and bdevsw entries into pmax device drivers.
1996-04-10 16:17:23 +00:00
cd9ef2be9c
make the EISA code look a bit more like the PCI code, in the way
...
the bus is configured, interrupts are handled, etc. define
eisa_chipset_tag_t and eisa_intr_handle_t types, and the following
functions:
eisa_attach_hook()
eisa_maxslots()
eisa_intr_map()
eisa_intr_string()
eisa_intr_establish()
eisa_intr_disestablish()
to do the right things for the i386.
1996-04-09 23:00:25 +00:00
4444d2866e
there's now a eisa_machdep.c which must be included when including
...
EISA support.
1996-04-09 22:59:03 +00:00
3ccd8b454e
it's now safe to include both isavar.h and eisavar.h. Also, pass
...
an appropriate cookie (NULL) to the EISA attach code for use with the
EISA functions.
1996-04-09 22:58:29 +00:00
8a1933076a
Fixes for -Wall -Wmissing-prototypes:
...
Replace impliclty-sized types (u_long, u_short) used in
declarations of byteorder functions witho explicitly sized types
(u_int32_t, u_int16_t).
Avoids problems with using ntohl(foo) as (eg) an argument to printf().
1996-04-09 20:56:45 +00:00
08a45c0a18
Fixes for -Wall -Wmissing-prototypes:
...
Do not define __BDEVSW_DUMP_OLD_TYPE, as it breaks prototyping
of device dump functions, and should be port-dependent in any case.
The pmax 4.4bsd/pmax-derived drivers are being fixed, and the pica port
uses the MI scsi drivers already.
1996-04-09 20:54:08 +00:00
4c26e95dde
Initialize relevant elements of the `romaux' structure in romprop().
1996-04-09 15:24:00 +00:00
43411d2e96
Convert to use <machine/bus.h>.
1996-04-09 00:46:15 +00:00
c4bd7796ba
Add to DPADD for each library in LDADD; Reported by Mike Long <mike.long@analog.com> in PR #2301 .
1996-04-08 21:21:54 +00:00
1a1a8ba8c9
Undo unintended change in previous commit: _mcount is static.
1996-04-08 20:55:36 +00:00
a24af7a7c2
Added prototypes to everything. Made all files compile with -Wall.
1996-04-08 18:32:26 +00:00
86c328d230
Drivers for DZ11/DZV11/DZQ11 serial cards.
...
Written (mostly) by Ken Wellsch.
1996-04-08 17:22:20 +00:00
da3dabc052
Add PPP_BSDCOMP and PPP_DEFLATE options.
1996-04-08 14:17:28 +00:00
7822ce0c03
ANSIfy:
...
Add prototypes and fix printf format strings to compile cleanly with
cc -Wall -Wmissing-prototypes.
1996-04-08 00:57:37 +00:00
aff8e70475
Fix hanging open comment.
1996-04-08 00:52:10 +00:00
223eb30b4e
ANSIfyto compile with -Wall -Wmissing-prototypes:
...
Add prototyped declarations for scsiGroup0Cmd and scsiGroup1Cmd.
Add prototype declarations for scsiPrintSense. Cut the inqiury-response
pretty-printer from tz.c and rz.c and paste it in as scsiPrintInquiry.
1996-04-07 22:53:54 +00:00
61a27eb882
Fix old pmax scsi disk and tape (rz and tz) drivers to compile with
...
-Wall -Wmissing-prototypes:
Add prototypes.
Fix printf() format strings (%x vs pointer-arg, %x with a long int).
Fix a possibly-uninitialized shadowing local variable "resid" in tzdone().
include <sys/systm.h> to get prototypes for printf() and bcopy().
1996-04-07 22:46:29 +00:00
940ccbc5df
Fix typo that caused sun4 machines to be misidentified as sun4c-class.
...
Fixes reported problem of binstall not stripping the a.out header from
the boot block on sun4 machines.
1996-04-07 20:00:12 +00:00
73b62487b0
ANSIfy for gcc -Wall:
...
fix glitch in the comments describing the glyph for semicolon.
Somehow, instead of ":" they had an open-comment.
1996-04-07 19:54:37 +00:00
69b52a3f4a
ANSIfy for -Wall: add prototype declaration for rcons_font().
1996-04-07 19:53:36 +00:00
14bffff70d
Add a stub config_init() function, so kernel will link. Temporary, until
...
we use new config.
1996-04-07 18:21:08 +00:00
d115f89b5f
Update arch/pmax/pmax/genassym.c to compile with -Wall: use offsetof().
...
Move to mips/pmax/genassym.c, as (most of) the assembler locore code is
being merged into a generic-MIPS locore.
Remove the redundant pmax/pmax/genassym.c.
1996-04-07 14:27:00 +00:00
77366064b8
Fix oversight in sun4m changes: the CPU attach code moved, so the CPU
...
was never getting attached on a sun4 machine. Fix this so that the
cache and FPU get enabled on sun4 machines. (Believe me, a 4/260 is
slot enough, *with* the cache...)
1996-04-07 06:02:20 +00:00
56fed0c102
Fix slight oversight in previous change.
1996-04-07 05:50:59 +00:00
d1ca7d4c47
minor cleanup
1996-04-07 05:47:26 +00:00
639d1d787e
minor nit...
1996-04-07 05:45:08 +00:00
a682037ce7
SunOS binaries use "trap #2" (for some obscure FPU business,
...
or so claims the comment in trap.c). Reinstate the code that
treats trap 2 as "trace" which is given special handling in
trap.c for SunOS binaries. Also add some comments about this.
Thanks to <Ian.Dall@dsto.defence.gov.au> for this one.
1996-04-07 05:42:17 +00:00
d68e57ee64
Make this compile again on a SUN4-only kernel. (Avoid "unused foo"
...
warnings from gcc -Wall. While the optimizer is smart enough to
eliminate dead code, it looks like the rest of gcc doesn't Get It.)
1996-04-07 04:48:46 +00:00
84c7027789
Add bus_io_{read,write}_multi_{1,2,4,8}() to the <machine/bus.h>
...
interface, and implement them (except for the 8-byte versions) on
the i386.
1996-04-05 23:59:37 +00:00
e50fc72424
make netbsd/sparc boot on sun4 once again. the sun4m changes introduced
...
config lines for obio0 devices without addresses (thus cf->cf_loc[0] took
the default value of -1). we now ignore these entries on a sun4 since
they could never be valid (eliminates a 'panic:alignment' fault at bootup).
1996-04-05 21:50:05 +00:00
a7c600676f
make netbsd/sparc boot on sun4 once again. the sun4m changes introduced
...
config lines for obio0 devices without addresses (thus cf->cf_loc[0] took
the default value of -1). this caused autoconf.c to map memreg0 to
obio physical address -1 (invalid). as soon as we took a memory fault
the code in memfault_sun4 [locore] would get a Watchdog timeout when trying to
read memreg0 (a.k.a. par_err_reg).
1996-04-05 21:44:25 +00:00
1ac76dc9c2
Typo in the new new config conversion fixed.
1996-04-05 15:53:41 +00:00
3ce4de5491
Pass reserved blocks in label so adosfs computes root block
...
correctly (close PR 2232).
1996-04-05 05:08:07 +00:00
a3fa4a5449
Compute partition offset with sectors/track and number of heads from the
...
Amiga partition block. Print a diagnostic if the sectors/track or
number of heads differs from the RDSK values.
Fix sorting by partition offset (don't drop last partition).
Save filesystem blocksize for adosfs partitions. (Closes PR 2232)
1996-04-05 04:50:26 +00:00
8eeab3102b
Probe clock registers on sun4s to make sure we attach the correct device
...
(sun4m has clocks at obio too).
1996-04-04 23:55:47 +00:00
8e427a346f
Check for frame pointers we can handle (i.e. in kernel space). This prevents
...
data faults when tracing proc0's context.
1996-04-04 23:25:35 +00:00
1372d856d7
cpu.c: correctly identify Sun4m associative caches
...
kgdb_stub.c: make it compile again with Sun4m-only kernel
1996-04-04 23:06:32 +00:00
1068aa5751
Add back support for cached DVMA on SuperSPARC (sun4m) machines that was lost
...
during merge
1996-04-04 23:05:22 +00:00
b0fd2dabcb
Include fd.c if (fdc | fd), so we're not obliged to define a device
...
at fdc.
1996-04-04 22:57:55 +00:00
9d1cd5e9be
Make this compile again; will need to deal with matchbyname() later, though.
1996-04-04 06:59:29 +00:00
c1c09c75e2
Add v2IRQ0 define for IIci-style internal video.
1996-04-04 06:55:29 +00:00
dba4d32f68
Initial check-in of the ieee fp support for the pc532.
...
ieee fp support by Ian Dall, NetBSD/pc532 integration by Matthias Pfaller.
Includes setjmp/longjmp added to locore.s.
1996-04-04 06:36:03 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
5645e460ac
apparently, it's now appropriate to use 'bt at isa' for bt54x SCSI
...
controllers, rather than the historic 'aha at isa'.
1996-04-04 05:01:51 +00:00
7bc2baeb01
update for the fact that 'alldevs' is now a TAILQ.
1996-04-04 00:27:24 +00:00
9ee06a9bd1
change vunmapbuf to void function to match MI code
1996-04-03 20:42:55 +00:00
6fa7f71c9c
fix christos' type-o: s/dec_decl/dev_decl/ on line 115.
1996-04-03 20:35:25 +00:00
46c087980e
Add explicit return types.
1996-04-03 08:55:20 +00:00
deef34f203
Add explicit return types.
1996-04-03 08:18:27 +00:00
4f6c412517
Remove an old `#define DIAGNOSTIC'.
1996-04-03 05:48:35 +00:00
b9eb8ab773
change "pcvt25h" in the example ttys file to "pcvt25"
...
to match changes in NetBSD's /usr/share/misc/termcap.
1996-04-03 04:37:44 +00:00
c132a81557
as per cgd:
...
temporarily revert bus config order back to isa->eisa->pci
until port allocation/accounting is ready (XXX).
works around problem of the if_ep driver's probe function trashing
an adaptec 2940 if the BIOS maps it in at port 0xf000. (the
BIOS on my new P166 does this, ... the BIOS on my P133's does not).
without this the P166 system will reset as soon as spl0() is called
(autoconf.c) making it impossible to install the OS.
1996-04-03 04:26:38 +00:00
234547bf5e
Add CPU ID's for the DEC StrongARM-110 processor.
...
Update control register bit definitions as the SA-110 has
separate instruction and data caches.
1996-04-02 21:45:25 +00:00
da9fca44a5
CVS trouble.
1996-04-02 13:52:28 +00:00
79ca6b2c5f
removed references "updatefast" and "updateslow" as they are no longer
...
defined/used.
1996-04-02 05:07:21 +00:00
8b39fc7f9f
removed refs to pcvtinfo.{updatefast,updateslow} as these are no longer
...
defined (or used).
1996-04-02 05:05:16 +00:00
7311f0da23
Late-breaking patch from Aaron.
1996-04-01 21:09:39 +00:00
10ffa5da40
Fix warnings when SUN4M is not defined.
1996-04-01 19:16:41 +00:00
3dbbc8d3e9
Fix another printf format argument.
1996-04-01 17:37:08 +00:00
4bdb6550cb
Added missing prototypes and include files, fixed parentheses so that it
...
compiles cleanly.
1996-04-01 17:36:20 +00:00
362a6875bf
Remove last dependency to dev_conf.h and the file itself.
1996-04-01 17:34:34 +00:00
f34addbb3b
- remove dependency to dev_conf.h
...
- remove unneeded casts for %b
1996-04-01 17:33:10 +00:00
34f644d1b9
Remove casts of printf args for %b format.
1996-04-01 17:31:38 +00:00
scottr