5fff88daf1
Note to self: set variable before using it.
2002-01-15 13:50:59 +00:00
273ca48725
Add power management hooks to pmsi driver and make sure that the
...
device is setup for the proper intellimode on resume.
2002-01-14 21:56:10 +00:00
8bf0d659b0
Don't use chp->wdc if it's NULL.
2002-01-14 21:51:35 +00:00
09dfdacac8
Use standard PCI power management definitions from pcireg.h instead
...
of homegrown ones.
suggested by Soren
2002-01-14 19:24:39 +00:00
ab04f9daae
Call malloc(9) with M_ZERO flag instead of bzero() after malloc().
...
XXX It seems these attachments need to be rewritten for modern config(9)..
2002-01-14 13:39:14 +00:00
bcba62925f
Call malloc(9) with M_ZERO flag instead of bzero() after malloc().
2002-01-14 13:32:44 +00:00
448d063b57
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-14 13:23:36 +00:00
626454530f
Regen.
2002-01-14 03:57:11 +00:00
a7bd403449
Fix typo.
2002-01-14 03:56:33 +00:00
c8ce02fd2c
add the dma command ext translations. pointed out by manuel.
2002-01-14 02:17:59 +00:00
916552082d
Add i830M to agp chip tables.
2002-01-14 01:38:25 +00:00
18a4a5a899
Regen.
2002-01-14 01:37:35 +00:00
0694a51a97
Add 82201CA to the chip table.
2002-01-14 01:35:39 +00:00
ef12cd1620
Change some names that I added earlier.
2002-01-14 01:35:05 +00:00
27a315e2c8
Add i830M to the chip list.
2002-01-14 01:29:13 +00:00
a80d13d476
Cosmetic error message fix.
2002-01-13 19:40:51 +00:00
e4f23fb652
Add code to handle PCMCIA cards placed on a PCI card with the PLX chip.
...
From OpenBSD and FreeBSD.
2002-01-13 19:38:25 +00:00
cf839323de
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-13 19:28:06 +00:00
2089bcf9c1
added amiga display/mouse/keyboard defines
2002-01-13 18:05:50 +00:00
f9b7ffe292
Add LBA48 support based on patches from Keisuke YOSHIDA. KNF a bit while
...
I am there.
2002-01-13 17:24:28 +00:00
e52f30dc7a
Every card I've seen has had their channels swapped with respect
...
to the mixer. Ie:
$ mixerctl -w outputs.master=0,191
Would result in the _right_ speaker being turned off.
So, we will swap the left and right mixer channels to compensate
for this.
2002-01-13 15:07:28 +00:00
a3e1dd7338
Remove unnecessary (also unused) AC'97 definitions -- they already exist
...
in syssrc/sys/dev/ic/ac97reg.h.
2002-01-13 14:48:01 +00:00
4d4665161a
Use malloc's M_ZERO flag instead of malloc/memset.
2002-01-13 14:44:15 +00:00
3d94c421cc
Added new config hook type PCIINTR (handling PCI interrupt).
...
Added config hook APIs, config_connect, config_disconnect and
config_connected_call.
Supported PCIINTR type event in hpcio.
2002-01-13 14:00:38 +00:00
36fb148d72
Remove the quirks I added for an ethernet card I have.
...
This ``quick fix'' shall not make it into a release, and the problem doesn't
come from the card but rather from my laptop.
2002-01-13 12:28:02 +00:00
2968e4165f
add Edimax Technology Inc. EP4000A
...
add another Linksys Etherfast clone (Level One)
2002-01-13 10:41:11 +00:00
2ae5495943
regen
2002-01-13 10:39:33 +00:00
0e264923e6
add Edimax Technology Inc. PCMCIA Ethernet Card
2002-01-13 10:38:47 +00:00
284103af4a
Add support for the driver to work after suspend/resume. Does nothing
...
fancy, works for the basic output case, but does not support programs
which use playback while going into suspend.
Sketched after code found in FreeBSD and Linux drivers.
2002-01-13 10:06:51 +00:00
2e156f09dc
* add power definitions
...
* fix a few (hidden) typos in the definitions
2002-01-13 10:02:58 +00:00
9ea4be44f4
Number of elements in button_config is smaller than CONFIG_HOOK_MAX_ID.
2002-01-13 08:28:27 +00:00
1a2fda613e
Regen.
2002-01-13 03:14:22 +00:00
99d55e5ea2
Add 3Com 3crwe777a AirConnect.
2002-01-13 03:13:39 +00:00
f03445a59f
For fixed block drive, for invalid sense error code, set info to
...
xs->datalen / st->blksize instead of xs->datalen; as code assume later
that info is a block number.
Should fix kern/2727.
2002-01-12 20:30:11 +00:00
e6f8529d26
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:58:16 +00:00
c12b5c180d
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:41:02 +00:00
1267bddc09
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:29:30 +00:00
b87a051ec8
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:17:05 +00:00
84926576f1
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 16:03:11 +00:00
68f9f4a5d4
Make ehci_pci.c compiles again.
2002-01-12 02:06:23 +00:00
0cd298f02e
Skip not yet emulated 8bit ulinear encoding correctly.
2002-01-12 00:13:42 +00:00
1511af3e96
Resurrect the 'sc->sc_sbdsp.sc_dev.dv_cfdata = match' in pasprobe(),
...
it's needed for sbdsp.c:sbdsp_probe().
2002-01-11 17:45:10 +00:00
3c9a8d7d19
Fix fallout from previous - the 'sc->sc_dev.dv_cfdata = match' needs
...
to be retained, it's referenced in sbdsp.c:sbdsp_probe().
2002-01-11 17:33:01 +00:00
1e4fff76f0
Bug fix: correct chattering suppressor. Card insertion will be
...
detected properly by this fix.
2002-01-10 10:30:08 +00:00
02501f9aa4
remove a unnecessary message print
2002-01-10 10:17:55 +00:00
43aeee0fe8
Split out some code so you can have cardbus ehci without pci.
2002-01-09 22:56:22 +00:00
5e6cfa6a09
print link status changes to the console
2002-01-09 19:37:02 +00:00
1a1f9d7acf
Regen.
2002-01-09 19:29:39 +00:00
03027531da
Add Intel 82801 and 82830.
2002-01-09 19:29:07 +00:00
f9f119b62a
cosmetics: print a "\n" terminated string if no "fw at fwohci" is
...
configured
2002-01-09 18:50:54 +00:00
dcea5d31ee
-don't apply scsipi_strvis() twice, it tries to octal-print the string
...
terminating zero and uninitialized dada following
-use use the "vendor" field for the name which is used in the default
disklabel, the "product" field is meaningless or not existing for ATAPI
(serial number)
2002-01-09 18:48:18 +00:00
bd4e2862b0
We only need a single component buffer pool.
2002-01-09 04:21:43 +00:00
229efaff69
Add ioctls to get (DIOCGCACHE) and set (DIOCSCACHE) cache enables
...
on disks in a generic way. Implement these ioctls for SCSI disks.
This is not fully fleshed-out yet, but it allows people to experiment
with disk caches more easily.
2002-01-09 04:12:11 +00:00
2ad74785a4
Move a bunch of debugging stuff to be only used if DEBUG is turned on.
2002-01-09 03:10:19 +00:00
b5d5702d16
Deal with lossage caused by recent isa changes [/briq potr]
2002-01-08 17:20:44 +00:00
2e06a41ea8
Fix typo in comment. Reported by Alexander Yurchenko in private mail.
2002-01-08 11:47:27 +00:00
f629228e87
Changes to the wdc(4) mi driver that add the WDC_CAPABILITY_SELECT
...
flag and a callback function which gets called whenever a target is
selected on a channel.
The macppc wdc driver needs to reprogram its timing register
differently for each target on a channel each time that target is
selected. I also changed the ATA4_TIME_TO_TICK to use a divisor of
15, which brings our timing calculations consistent with darwin.
These patches fix problems on my dual usb ibook with combo dvd/cdrw
drive because the hard drive supports udma and the combo drive does
not. Without turning off the udma timings in the configuration
register, I cannot access the non-udma combo drive.
2002-01-07 22:11:17 +00:00
3835413bc1
Overhaul of the ISA autoconfiguration code to support direct
...
configuration of devices logically attached to the ISA bus:
* Change the isa_attach_args to have arrays of io, mem, irq, drq
resources.
* Add a "pnpnames" and a linked list of "pnpcompatnames" to the
isa_attach_args. If either of these members are non-NULL,
direct configuration of the bus is being performed. Add an
ISA_DIRECT_CONFIG() macro to test for this.
* Drivers are not allowed to modify the isa_attach_args unless
direct configuration is not being performed and the probe fucntion
is returning success.
* Adapt device drivers -- currently, all driver probe routines return
"no match" if ISA_DIRECT_CONFIG() evaluates to true.
2002-01-07 21:46:56 +00:00
fad06cc1a6
Re-enable radio at bktr, only if NRADIO > 0 and an FM tuner is present.
2002-01-07 18:05:33 +00:00
db154a4d20
"attach radio at radio":
...
using one word as both attribute and device doesn't work well,
radio.c is pulled in even with no such device in the configuration,
and the kernel doesn't link due to missing "radio_cd".
So call the attribute "radiodev" to avoid confusion.
2002-01-07 17:44:42 +00:00
559521efa3
Disable broken radio(4) support for bktr(4). The configuration code doesn't
...
even check if the TV card has a radio tuner.
2002-01-07 12:12:55 +00:00
2f741a258e
Backout revision 1.155 which caused build failures if bktr(4) is used
...
without radio(4).
2002-01-07 11:58:28 +00:00
65aa7d5e7c
Clean up preprocess handling of optional radio(4) support a little bit.
2002-01-07 10:43:43 +00:00
311329a369
Integrate recording support into the driver. Not very heavily tested yet.
2002-01-07 07:33:09 +00:00
19c2127b85
Revert previous. Need to be more careful with what gets chopped out.
2002-01-07 05:30:53 +00:00
345de5b80a
Some of this stuff is really just for debugging, so compile it only if
...
DEBUG is defined.
2002-01-07 02:27:42 +00:00
af9b7112ab
#if 0 rf_SetReconfiguredMode() since it is unused now, but may be
...
needed someday.
2002-01-07 01:58:03 +00:00
6a997e3c73
Compile in radio(4) only it is activated in the kernel configuration.
2002-01-06 23:19:18 +00:00
5777b5c311
Increase max sampling rate on SB16. It seems almost all models supports it.
2002-01-06 20:24:12 +00:00
4e14c9fb3f
For cosmetic reasons, add 'ESS Technology ES1921' to the table of codec Ids.
2002-01-06 17:03:17 +00:00
f0b744e0cf
Note that Don Kim wrote the original Linux driver.
2002-01-06 16:58:23 +00:00
13498a6196
Note addition of esa driver.
2002-01-06 16:06:36 +00:00
244caf0f16
Import driver for the ESS Allegro-1 / Maestro-3 based PCI Audio Accelerators.
2002-01-06 16:06:14 +00:00
4fee2664e3
Change copyright somewhat. (These are not TNF copyright templates so I
...
removed the advertising clause.)
2002-01-06 15:41:00 +00:00
58d1fe0d04
Add missing definition of STATUSBIT_STEREO.
2002-01-06 15:37:08 +00:00
9a0fd5e477
Part of the ESS Allegro-1 & Maestro3 driver.
2002-01-06 15:17:28 +00:00
a17eec36aa
Add radio support to bktr.
2002-01-06 02:47:36 +00:00
1eb3eee47c
Add basic support for the radio(4) interface.
2002-01-06 02:42:45 +00:00
a40b01901f
revert changes I made a long time ago. This should undo the changes which are causing problems on some non-x86 platforms. I'll probsably redo some of these changes, but after the next release branch.
2002-01-05 20:10:53 +00:00
83ad3c8a91
Regen.
2002-01-05 16:36:59 +00:00
7f0a4dd3c9
Remove Mach64 B that conflicts with Mach64 GP.
2002-01-05 16:35:52 +00:00
e75edd40ae
Initialize _ca struct right.
2002-01-05 01:30:01 +00:00
b915c78113
Regen.
2002-01-05 00:16:42 +00:00
0bb5b26936
Add a bunch of PCI-wireless PCMCIA adapters. They are probably all based
...
on a PLX chip. (For which we have no driver yet.)
2002-01-04 18:26:20 +00:00
450887c407
Add support for "D-Link DFE-690TXD 10/100".
...
by kern/15100: From: John Nemeth <jnemeth@access.victoria.bc.ca>
2002-01-04 15:24:24 +00:00
8f88b8c44e
Regen.
2002-01-04 15:23:33 +00:00
4cdb84fe68
Add product "D-Link DFE-690TXD 10/100".
...
by kern/15100: From: John Nemeth <jnemeth@access.victoria.bc.ca>
2002-01-04 15:22:41 +00:00
99772f59c4
Move net/if_sppp.h to net/if_spppvar.h, create a new net/if_sppp.h
...
containing the userland visible thinks (i.e. ioctl definitions).
Remove all (both) old ioctls, as they had a brain dead API and made keeping
binary compatibility more or less impossible.
Replace by several new ioctls. While there, remove any arbitrary limits
(resulting from the old, broken ioctls) and allow any length of names
and passwords.
2002-01-04 12:21:24 +00:00
3ccb704762
add a vnddetach: it just free()s the vnd_softc. useful for LKM.
2002-01-04 06:31:08 +00:00
57b53bc9a8
The device close routine is called when _last_ descriptor to the
...
device file is closed, rather on every descriptor close. Instead of
getting the exclusive lock on open and releasing on close, get
the lock only when needed in sysmonioctl_envsys().
Fixes kern/14368 by Anthony Mallet. Okayed by Jason Thorpe.
While here, also inline sysmon_envsys_init() to sysmonopen_envsys(),
and g/c sysmonioctl_wdog() prototype.
2002-01-03 22:35:53 +00:00
f854b2521f
Add a DIAGNOSTIC check. From FreeBSD.
2002-01-03 22:20:45 +00:00
501071c88f
Correct the frequency calculation.
2002-01-03 21:52:26 +00:00
d9a0044d29
Implement REDUCED INTERRUPT OPERATION usage for FC cards- this allows the
...
firmware to delay completion of commands so that it can attempt to batch
a bunch of completions at once- either returning 16 bit handles in mailbox
registers, or in a resposne queue entry that has a whole wad of 16 bit handles.
Distinguish between 2300 and 2312 chipsets- if only because the revisions
on the chips have different meanings.
Add more instrumentation plus ISP_GET_STATS and ISP_CLR_STATS ioctls.
Run up the maximum number of response queue entities we'll look at
per interrupt.
If we haven't set HBA role yet, always return success from isp_fc_runstate.
2002-01-03 21:45:06 +00:00
f1ee77f0c3
Add USTIR_DEBUG.
2002-01-03 18:57:36 +00:00
51b2c397c3
Add ustir.
2002-01-03 18:56:40 +00:00
eb62bf638c
Add the ustir driver, for SigmaTel STIr4200 USB/IrDA Bridge.
...
Written by David Sainty <David.Sainty@dtsp.co.nz>.
2002-01-03 18:54:31 +00:00
d083e37f0b
Add \n in attach messages.
2002-01-03 18:13:19 +00:00
43b6b4ca49
Need ibm561.c for TGA.
2002-01-03 05:35:31 +00:00
e444b1434a
Regen (added Rainbow Technologies & Rainbow's CryptoSwift 200).
2002-01-03 05:27:39 +00:00
cee4ea6496
Add Rainbow Technologies vendor ID & Rainbow CryptoSwift 200 PKI accelerator
...
(CS200/PCI).
2002-01-03 05:25:48 +00:00
e4552bb657
Add a comment.
2002-01-02 22:44:44 +00:00
68d53cd694
Fix typo in last commit.
2002-01-02 20:58:12 +00:00
f7839315fb
Some more usb_proc_ptr changes.
...
Also some minor stylistic changes.
2002-01-02 20:55:58 +00:00
215ddc9ef7
Set sc_framesize to a reasonable value early on so that DEBUG code
...
doesn't choke before we discern the real value.
2002-01-02 19:04:17 +00:00
cee8ba6db9
Get rid of a few stray __P().
2002-01-02 17:20:09 +00:00
b99cd0e9f5
More whitespace fixes from FreeBSD.
2002-01-02 16:20:14 +00:00
474928fb8f
when bootinfo has no framebuffer information, don't attach bicons.
2002-01-02 12:57:49 +00:00
c41bbdcea2
Change the probe code. You cannot unmap bus space and then use it.
2002-01-02 12:42:23 +00:00
c572876ecb
Fix another descriptor parsing bug. Thanks to Tero Kivinen for
...
patiently supplying me with debug output.
2002-01-02 11:10:50 +00:00
d7f7000641
Add missing newline.
2002-01-02 04:10:02 +00:00
71dd2d73a6
Fix typos.
2002-01-02 03:47:35 +00:00
1d26d9e5fd
Move debug define.
...
Remove some cruft.
Update with some stuff from Warner Losh's driver.
2002-01-02 03:44:56 +00:00
e814956b5d
Add udsbr.
2002-01-02 03:26:54 +00:00
f63f2e4dfe
Add udsbr(4), a D-Link DSB-R100 FM radio (untested).
2002-01-02 03:21:36 +00:00
040f1e8c05
Support detach.
2002-01-02 02:44:02 +00:00
369f1d1c80
Add radio names.
2002-01-01 23:12:19 +00:00
1c06f6a40f
Add support for radio cards. Written by Maxim Tsyplakov and Vladimir Popov
...
for OpenBSD, from where it was imported.
2002-01-01 21:51:38 +00:00
cdf2a29382
Regen.
2002-01-01 21:47:34 +00:00
ec0a570a33
Add a radio card.
2002-01-01 21:47:08 +00:00
739775cbbb
Add stanza for PC Weasel/PCI.
2002-01-01 16:49:05 +00:00
e59c0dedfb
Watchdog back-end driver for PC Weasel/PCI serial console and remote
...
management board. Written by hpeyerl@realweasel.com and
thorpej@wasabisystems.com . Requires Weasel firmware v2.04 and later.
2002-01-01 16:48:34 +00:00
371722006a
Add a missing subclass definition.
2002-01-01 14:23:37 +00:00
6ca57419d1
Labels must be followed by statements.
2001-12-31 22:07:58 +00:00
f9df4d877e
Avoid an "unmamed fields" warning (gcc 3.1).
2001-12-31 22:06:47 +00:00
aedf82267c
Move the declaration of an enum to avoid an "unnamed field not allowed"
...
warning in gcc 3.1.
2001-12-31 21:30:01 +00:00
cec9735688
Delay bus enumeration a little in case the controller is a companion
...
controller. This way the main controller can gain ownership of the port
before enumeration starts.
2001-12-31 15:55:51 +00:00
d8e5a1dc07
Dump enpoint number instead of endpoint index.
2001-12-31 15:54:27 +00:00
88da42185c
Don't try to deactivate child if we have no bus yet.
2001-12-31 12:52:50 +00:00
0498c38d3d
Whitespace fixes (from FreeBSD).
2001-12-31 12:37:13 +00:00
637dc4b2fe
Change xfer abort to wait for the softintr to run.
2001-12-31 12:20:35 +00:00
096f451f64
Change abort slightly.
...
Change debug output.
2001-12-31 12:16:57 +00:00
f1397b7e37
Dump more of the command.
2001-12-31 12:15:46 +00:00
152efb1a0e
Make a typedef for struct proc to make portingeasier.
2001-12-31 12:15:21 +00:00
d14e739b92
Don't allow setting the configuration when an endpoint is open. From
...
FreeBSD.
2001-12-31 11:56:37 +00:00
0a3269865e
Only clear stall if endpoint is stalled. From FreeBSD.
2001-12-31 11:54:06 +00:00
ff21b251a0
Make sure we don't have any pending softintrs when entering polling mode.
...
Thanks to Darrin for finding and fixing this problem when using USB
keyboards in DDB.
2001-12-30 20:26:59 +00:00
776b0e7851
A little more debug.
2001-12-30 19:37:43 +00:00
a0d9eb8746
add powerhook support to resume correctly, fix PR#13079.
2001-12-30 19:33:15 +00:00
70dea46276
Fix typo.
2001-12-30 19:22:28 +00:00
a6a57e7b6f
Registers are of u_int8_t type.
2001-12-30 13:13:04 +00:00
23d158a3e8
regen
2001-12-30 12:46:10 +00:00
3276c42a93
add
...
TSB43AA22 OHCI IEEE 1394 Host Controller
2001-12-30 12:45:32 +00:00
dd4b4280f7
Add new scanners to the table.
...
(The scanners don't actually have to work to be in the uscanner table,
this is how Linux does it and uscanner is just there because Linux has it.)
2001-12-30 11:13:22 +00:00
fb4d205cd6
Regen.
2001-12-30 11:08:19 +00:00
095e2b87e3
Fix typo in last commit.
2001-12-30 11:01:44 +00:00
bdbdfed4ec
Add some missing files.
2001-12-30 11:01:24 +00:00
7a22165e1c
fix product ID
2001-12-30 05:12:36 +00:00
b48ed7ad6d
regen
2001-12-30 05:11:29 +00:00
e9ab191fc3
Add some vendor/product IDs (from FreeBSD)
2001-12-30 05:09:50 +00:00
2e72aee615
regen
2001-12-29 22:31:10 +00:00
35012be445
add products
...
VT6305 OCHI IEEE 1394 Controller
VT3606 OCHI IEEE 1394 Controller
2001-12-29 22:30:33 +00:00
2270cd2cb5
Add a case for x86_64.
2001-12-29 21:13:46 +00:00
5a31e4e8f8
Make the driver a little less talkative on errors.
2001-12-29 20:50:16 +00:00
3850573d96
Remove garbage.
2001-12-29 18:57:16 +00:00
c19b7e5c1b
Be more paranoid about input sizes.
2001-12-29 18:56:52 +00:00
5db54303c8
Reset global count value properly.
2001-12-29 18:56:20 +00:00
198e193c28
Don't clear global report values when reporting an item.
2001-12-29 17:48:29 +00:00
0d2905f4fc
- Add a structure needed for access to CRTC registers.
...
- Add definitions for misc output register.
- Add defintions for the number of registers.
2001-12-29 17:44:35 +00:00
dde1e51a31
Add functions needed for access to CRTC registers.
2001-12-29 17:40:35 +00:00
ea3be41a59
KNF.
2001-12-29 17:06:50 +00:00
93f9b36aad
Add a debug message.
2001-12-29 16:15:42 +00:00
496dc72437
Add some definitions from the USB OTG (On The Go) spec.
2001-12-29 15:44:11 +00:00
065a38a17f
regen
2001-12-29 15:01:23 +00:00
e42e0310b4
Socket Communications Low-Power CF WLAN
2001-12-29 15:00:45 +00:00
9cef2a3db7
Add an XXX comment.
2001-12-29 14:25:47 +00:00
01eafb2239
Add some IrDA names.
2001-12-29 14:24:54 +00:00
9dd24c8a92
Regen.
2001-12-29 14:08:02 +00:00
5f958aabb7
Fix a typo.
2001-12-29 14:07:45 +00:00
8164bd8bae
Move some USB device quirks to the umass_quirk table.
2001-12-29 14:06:18 +00:00
b965a7d6eb
Remove some quirk entries that are handled in umass_quirk now.
2001-12-29 13:55:02 +00:00
414b3c7766
Always set the PQUIRK_ONLYBIG quirk for SCSI devices.
2001-12-29 13:52:21 +00:00
276b009425
Introduce a field, busquirks, in the umass quirk table that is passed
...
directly to the quirk field for the bus.
2001-12-29 13:46:23 +00:00
a926e1d151
done - Make fwohci detach correctly (for cardbus/etc type interfaces)
2001-12-29 12:28:05 +00:00
fc50aac093
implement fwohci detach routine.
2001-12-29 12:26:31 +00:00
e6bd479028
Add the new names for uhidev.
2001-12-29 10:53:13 +00:00
59473972d2
Only pull in HID processing if a driver needs it.
2001-12-29 10:50:55 +00:00
63a6896a6c
regen
2001-12-29 08:32:06 +00:00
78efe121bf
add product
...
IBM Smart Capture Card II
2001-12-29 08:31:01 +00:00
750a5959b8
Add some missing scan code translations. Docs from Microsoft via Perry Metzger.
2001-12-29 02:53:41 +00:00
49b8e36112
Clean up the C_ and S_ constants. We don't really need two sets of them.
...
Also make the interrupt handler for older 3com cards look like the xl one.
I.e. don't ack the interrupt latch bit before checking if it is set.
At the same time, introduce constants for the watched interrupts, so that
we don't copy them all over the place.
2001-12-28 20:35:46 +00:00
935b0481a9
Introduce an extra driver level for HID devices, uhidev. This uhidev driver
...
attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to
uhidev. The reason for this change is that some HID devices report multiple
components (like a keyboard and a mouse) using the same interface, but with
different report identifiers. The report identifier can be specified with
a locator for the HID drivers.
Furthermore, change the ukbd driver to handle other formats than the boot
protocol.
2001-12-28 17:32:36 +00:00
818f391658
Move this figure to more suitable place:
...
http://www.netbsd.org/Documentation/Hardware/Chips/C-Media/cmi8738-mixer.fig
2001-12-28 14:02:48 +00:00
f690fc0845
More DIAGNOSTIC.
2001-12-28 00:21:26 +00:00
3bf49b584d
Add some more #defines.
2001-12-28 00:20:24 +00:00
5dbef63175
Use PQUIRK_ONLYBIG for all Olympus cameras, not just the C-1.
...
Use PQUIRK_ONLYBIG for the PQI TravelFlash.
2001-12-27 18:57:46 +00:00
04ec4ba316
Add some DIAGNOSTIC stuf that I forgot. From Nate Williams.
2001-12-27 18:48:28 +00:00
f8e03bd53c
Change some DIAGNOSTIC #defines.
2001-12-27 18:43:46 +00:00
74f17f2922
Analyzed structure of CMI8738/PCI-6ch-* mixer
...
for the benefit of those who edit the driver.
This is a Fig file. Use Xfig to edit/view, use Transfig
package to convert to other graphic formats.
2001-12-27 14:20:30 +00:00
f741672ddc
Fix comment.
2001-12-27 14:17:04 +00:00
0df9b7654d
ANSIfy.
2001-12-27 11:28:01 +00:00
d0f9a76506
Update a comment.
2001-12-27 11:27:11 +00:00
1f003f1c43
Name collection types.
2001-12-27 11:25:47 +00:00
81b818b421
Add usbd_get_protocol().
2001-12-27 11:24:42 +00:00
12560718c5
Files I forgot to remove in last commit.
2001-12-27 11:23:56 +00:00
996d5c6c26
Be a little more paranoid.
2001-12-26 10:56:58 +00:00
80c0f36acc
Re-make these after usbdevs update.
2001-12-26 07:18:36 +00:00
2d1b70cd08
Add ID for memory stick slot in Sony Clie running PalmOS 4.0. This may also
...
be the same for the PalmOS 3.5 versions, but I can't test that.
2001-12-26 04:32:39 +00:00
09638d7a55
add 600 times dummy read from codec for YMF744 (revision < 2).
2001-12-25 16:55:50 +00:00
70e238a1bc
PR/15049: Katsuomi Hamajima: fix memset re-definition.
2001-12-25 14:03:15 +00:00
ff0249d84d
Fix block position calculation in esl_intr.
2001-12-25 04:05:34 +00:00
b0df9e12af
The check for AUMODE_PLAY in esl_set_params was breaking some applications.
...
Remove it.
2001-12-25 03:47:46 +00:00
a89f9c462b
'nintr' from esl_softc was never used -- remove it
2001-12-25 03:46:34 +00:00
c4669fd0d0
Fixes output at 44kHz, 16-bit, stereo. Thanks to Charles Hannum and
...
Lennart Augustsson for providing proper fixes.
2001-12-25 02:37:39 +00:00
0228f218d3
Add UISDATA_DEBUG.
2001-12-24 21:37:52 +00:00
213baeaad6
Use the new USB_PRODUCT_ANY match.
2001-12-24 21:36:54 +00:00
bfc3660fb1
Add some more DIAGNOSTIC tests.
...
Make usb_match_device() match on USB_PRODUCT_ANY.
2001-12-24 21:36:15 +00:00
c33e730dd9
Get rid of the transfer_speed nonsense to calculate the timeout.
...
We get passed a timeout from the upper layer which is what matters.
2001-12-24 19:24:33 +00:00
ab7b323efa
Add a preliminary version of a driver for In-System Designs non-standard
...
ATA-over-BulkOnly protocol. The ISD chip can be found, e.g., in the
Archos MP3 player.
The driver still lacks real error handling.
2001-12-24 13:43:24 +00:00
45fc7e27e9
Regen.
2001-12-24 13:40:50 +00:00
0d60061a8b
Add some more In-System based adapters.
2001-12-24 13:40:31 +00:00
56b5867371
Make the separation between wire protocol (umass.c) and command protocol
...
(umass_scsipi.c) more distinct.
It is now possible to add new command protocols with a minimum of change.
The umassbus.[ch] files have been renamed umass_scsipi.[ch] since this
reflects their purpose better.
2001-12-24 13:25:52 +00:00
e71e5045dc
Back off rev. 1.21, this is going to be handled via userland keymap file.
...
Discussed with Martin Husemann.
2001-12-24 12:39:55 +00:00
6e8072d607
enable the card before trying to establish an interrupt because we need the
...
ccr mapped on multi-function cards.
2001-12-24 12:07:27 +00:00
d3d8a33acf
change if defined foo to ifdef foo and change a c++ comment into a c comment.
2001-12-24 09:41:34 +00:00
d0b18148da
make sure that we adjust the end of the subrange if we adjusted the beginning
...
of it, but the offset of the card. Fixes 'cannot map i/o space' on 3c562d
2001-12-24 09:37:53 +00:00
0e9f2d7a35
when we disable, we first disestablish the interrupt and then the card.
...
when we enable, we first configure the card and then establish the interrupt.
This is so that the ccr is mapped on multifunction cards.
2001-12-24 09:30:40 +00:00
a89c5fcfcb
Merge in changes sent by Michael Shalayeff, from OpenBSD port of this driver:
...
- use better default for DAC level (previous produced distorted output)
- preserve DAC setting in between openings
2001-12-23 23:14:59 +00:00
c4e01300ad
Add the AC97_HOST_SWAPPED_CHANNELS quirk for emuxki, and do some
...
whitespace cleanup. Streight from Yannick Montulet.
2001-12-23 22:54:08 +00:00
0a96b4c675
Whitespace cleanup, streight from Yannick Montulet.
2001-12-23 22:52:49 +00:00
c4552cab7f
support FUJITSU MB86960/5 based ethernet cards
...
FMV-J181,182,182A
2001-12-23 09:25:19 +00:00
766857df86
add FUJITSU MBH10302 specific Registers
2001-12-23 09:21:00 +00:00
e5761e3205
regen
2001-12-23 09:11:05 +00:00
42ff7db32c
change CIS name
2001-12-23 09:10:39 +00:00
59c47ef767
The FujiFilm USB storage drive doesn't have a flex geom page and
...
doesn't know REQUEST SENSE.
2001-12-22 13:29:50 +00:00
e1839209b8
Add new quirk: NO_REQUEST_SENSE
...
Submit by: Dave Sainty
2001-12-22 13:21:59 +00:00
bfa5b70752
Hmmm. These were done this year, not 3 years ago.
2001-12-22 01:38:20 +00:00
3e919c40c7
Regen.
2001-12-21 23:37:41 +00:00
72d569430d
Fix typo, pointed out by Nathan Binkert.
2001-12-21 23:37:18 +00:00
7ddce9880c
When mapping the consumer assignment, assign db_seg[0] to cb_seg[0] so any
...
private fields are copied as well. Then adjust cb_seq[0] public fields.
This make the DEFPA come up on sparc64.
2001-12-21 23:21:47 +00:00
53fbe7ac5d
Correct a few comments and constant names in the light of the actual
...
documentation for this card (which I seem to have).
2001-12-21 22:33:28 +00:00
c6107a12f8
Add UIRDA_DEBUG.
2001-12-20 17:41:32 +00:00
4668f40616
Don't forget to call start routine in dongle manipulation.
2001-12-20 11:30:13 +00:00
28318702e6
Rearrange code that wiggles modem control lines so it actually reaches
...
the com port driver.
2001-12-20 09:26:35 +00:00
16c96355a8
Fetch the MAC address from the NVRAM on the SiS 630 built-in Ethernet.
...
Based on PR 14665, Stephen Borrill <netbsd@precedence.co.uk>.
2001-12-20 03:32:31 +00:00
f1b4fd111e
Regen; added SiS 630 PCI-Host bridge.
2001-12-20 03:24:58 +00:00
694fcc51c0
Add the product ID for the SiS 630 PCI-Host bridge.
2001-12-20 03:24:22 +00:00
5938b2bd62
Ops, a Ultra100>=TX2 is always in native mode !
2001-12-18 16:40:51 +00:00
787b934e1e
The CMD0649 has 2 truly independant channel. tested by and patch from
...
Love <lha@stacken.kth.se>.
I suspect this is true for the 648 too; if someone with a 648 and one device
on each channel could test that all works with one_channel = 1, it would
be great !
2001-12-18 16:32:54 +00:00
95c864d4f6
Previous was committed by mistake; revert.
2001-12-18 15:50:23 +00:00
b2a9a2993d
Move utility routine from uirda.c to usbdi_util.c.
2001-12-18 14:50:01 +00:00
6b7cc2a465
Couple more tweaks, probably still not working.
2001-12-18 13:38:48 +00:00
214499d236
change routine of device search.
...
mbe_pcmcia_lookup() is introduced
2001-12-18 11:32:47 +00:00
62ddf45f47
regen
2001-12-18 11:23:49 +00:00
e59b8e538e
add CIS strings of FUJITSU FMV-181,182,182A
...
delete ITCFJ182A, because FMV-182[A] ID is same as ITCFJ182A.
2001-12-18 11:23:24 +00:00
57957526e0
Uoo
...
Make it compile.
2001-12-17 14:34:37 +00:00
1b0449d255
support BREAK function,
...
keep a value of the last LCR.
2001-12-17 14:31:02 +00:00
d5f3329501
In BREAK, the value of LCR is held.
2001-12-17 14:19:39 +00:00
7cd101a6ca
Introduce the new umass quirk table.
...
Discussed with augustss.
2001-12-17 12:16:14 +00:00
a9f41fe33b
dd support for the Promise Ultra100TX2, Promise Ultra100TX2v2 and Ultra133
...
IDE controllers. In part from OpenBSD via ragge, in part from FreeBSD.
2001-12-16 23:35:52 +00:00
3b488c3f27
Fix an off-by-one error when autoconfig is hunting for a free RAID
...
device in the rare event that the one it wants is already in use.
Thanks to Wolfgang Stukenbrock for noticing the bug and filing the PR.
This fix addresses PR#14862.
2001-12-16 22:57:32 +00:00
e53aabcecc
Rename weasel.c to weasel_isa.c in preparation for supporting the
...
PCI version of the Weasel.
2001-12-16 22:35:31 +00:00
cf64f893c8
Try again: weasel -> weasel_isa
2001-12-16 22:33:35 +00:00
87e8f0c761
Oops, revert previous; it included some other changes there weren't
...
meant to be checked in.
2001-12-16 22:32:07 +00:00
b45e326520
weasel -> weasel_isa
2001-12-16 22:30:26 +00:00
cb2d65aaf9
Fix a minor typo.
2001-12-16 22:23:01 +00:00
23dfa29697
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-16 22:22:04 +00:00
fd8e4d1653
Regen:
...
Add Middle Digital, Inc. vendor ID. Add product IDs for the
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 22:00:41 +00:00
f7b4a308a9
Add Middle Digital, Inc. vendor ID. Add product IDs for the
...
Middle Digital PCI-Weasel Virtual VGA, Serial Port, and Control
registers.
2001-12-16 21:59:47 +00:00
3faa83dcb4
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-16 17:53:17 +00:00
0a1465a39c
handle vendor and product lookup with common routine
2001-12-16 15:11:19 +00:00
10c8cdf485
missing Misc Attribute of PCMCIA functions
...
FUJITSU CF Ether ITCFJ182A supported "Power down"
Power down supply current are 20mA
2001-12-16 06:07:50 +00:00
ff638ce5fd
support FUJITSU CF EthernetCard
...
ITCFJ181A
mbe0 at pcmcia1 function 0: Fujitsu J182A Compact Flash Ethernet
mbe0: Ethernet address 00:00:0e:c5:01:ea
2001-12-16 05:44:33 +00:00
a4ad95c757
regen
2001-12-16 05:43:16 +00:00
dc739ee7b9
add FUJITSU CF EthernetCard
...
ITCFJ181A
2001-12-16 05:42:46 +00:00
7d563fd40e
malloc() + memset() -> malloc() with M_ZERO flag
2001-12-16 04:17:02 +00:00
7f32875295
if_media support for the DP83905 AT/LANTIC (a souped-up DP8390).
2001-12-16 00:22:43 +00:00
c72d5d40dd
Add code to support the bugged Macronix MX98905 chip, as used in several
...
podulebus Ethernet cards. This replaces the NE2000 memory-access routines
with ones that don't try to transfer more than 255 bytes at a time.
This code should perhaps be merged into ne2000.c, but presumably most NE2000
clones won't need it.
2001-12-15 17:47:34 +00:00
875bff0962
To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
...
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-15 13:23:20 +00:00
3514260fd4
Regen.
2001-12-15 13:18:10 +00:00
c425f6ea72
Add Cologne Chip Designs ISDN controller.
2001-12-15 13:17:49 +00:00
e324e87ca8
Fix typo in comment.
2001-12-15 12:01:55 +00:00
3022b71f80
Correct copyright header.
2001-12-15 11:45:24 +00:00
df984ecc52
Use bus_size_t's for bus space read/write offsets.
2001-12-15 11:41:09 +00:00
6b9f60a2db
install into /usr/include/dev/ir, since Jason made irdaattach look here.
2001-12-15 01:03:28 +00:00
c6df7d4358
Regen.
2001-12-15 00:31:43 +00:00
385b05e2f9
Add another Altima PHY. From Peter Seebach.
2001-12-15 00:31:03 +00:00
c70fc55cba
Add a hack for ScanLogic SL11R IDE adapter. From FreeBSD.
2001-12-15 00:26:14 +00:00
3a31906841
Regen.
2001-12-15 00:25:00 +00:00
4a4ae0b6b7
YAD.
2001-12-15 00:15:01 +00:00
18c6adb0b6
YAD (Yet Another Device)
2001-12-15 00:07:45 +00:00
f79701e3fa
Regen.
2001-12-14 23:57:00 +00:00
154a59571d
Add SS1001.
2001-12-14 23:56:42 +00:00
356c54687b
Integrate fix from PR 10155.
...
Add ACCTON SS1001.
2001-12-14 23:56:21 +00:00
8d1585affa
The Olympus C-1 engine cameras seem to need the PQIRK_ONLYBIG quirk.
2001-12-14 22:15:52 +00:00
74a0c5db97
Remember to add header byte to length.
...
Use fewer magic constants.
(The driver works now.)
2001-12-14 15:44:04 +00:00
342a82f2dd
Start read at open.
...
Don't send new header when nothing changes.
(But uirda is still not working.)
2001-12-14 13:07:33 +00:00
7f50d17c46
Sanity check speed setting.
2001-12-14 12:57:30 +00:00
142cdc8997
Rearrage softc a little.
2001-12-14 12:56:58 +00:00
aa89e69702
Don't reallocate I/O buffers.
2001-12-14 12:08:14 +00:00
d787f49ee6
Fix descriptor definition bug.
...
Clear endpoint stall on error.
2001-12-14 12:02:53 +00:00
2ee0431a3d
Register definitions for the NatSemi DP83905 AT/LANTIC, as used in many
...
podulebus Ethernet cards.
2001-12-14 10:16:03 +00:00
f144837e0e
Stylistic changes
2001-12-14 08:58:49 +00:00
2d27ad7c73
Define a new structure to store wire specific control methods.
...
The basic BBB/CBI functions are stored as members of constant structure.
When attached device, softc holds one of that constant structures.
2001-12-14 08:46:19 +00:00
69424fd268
typo fix
2001-12-14 08:33:54 +00:00
49bba69842
Use device handle and interface number which are stored in softc.
2001-12-14 06:21:56 +00:00
53f34def69
Change style to store endpoint addresses and pipes.
2001-12-14 05:58:13 +00:00
219d22404b
Major restructuring for swizzling to the request queue and unswizzling from
...
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
2001-12-14 00:13:44 +00:00
acbfdd822a
Roll f/w to latest level, correcting several, ah, interesting bugs.
2001-12-14 00:07:55 +00:00
71e063c830
pdc202xx_setup_channel: remove a duplicate line.
2001-12-13 20:57:22 +00:00
ca9f8b13da
Regen: Add some promise controllers, from FreeBSD
2001-12-13 20:41:05 +00:00
b981b05472
Add some promise controllers, from FreeBSD
2001-12-13 20:40:28 +00:00
04c10fc0cf
Initialize lock.
2001-12-13 17:25:37 +00:00
3df38cc501
Some debug stuff.
2001-12-13 17:15:09 +00:00
f2821a312a
Fix TODO comment.
2001-12-13 17:14:21 +00:00
090d1a628e
Move parameter checks to a common place.
2001-12-13 15:09:07 +00:00
2485171a67
Use unsigned ints.
2001-12-13 15:08:26 +00:00
9dbc5fd199
ANSIfication & KNF fixes.
2001-12-13 08:38:35 +00:00
f075aa60ac
ANSIfication & cosmetic changes.
2001-12-13 08:35:38 +00:00
9ff2a7a76d
ANSIfy.
2001-12-13 08:34:55 +00:00
d5decae4e0
ANSIfication & cosmetic changes.
2001-12-13 08:31:39 +00:00
cba701fed7
remove bogus printf.
2001-12-13 02:50:30 +00:00
0ba8bac8fe
Fix some bugs. But the driver is still borken.
2001-12-13 02:16:21 +00:00
d6bbabfb1b
Some DIAGNOSTIC nonsense.
2001-12-13 00:33:58 +00:00
a97820e536
Don't use u_int since it requires sys/types.h
2001-12-13 00:33:36 +00:00
8e98b4a185
Add some special cases for the Sitecom adapter.
...
Make endian safe.
Fix some minor bugs.
2001-12-12 23:59:48 +00:00
3ed67fc0c4
Add missing delay for the tekram dongle.
2001-12-12 17:52:06 +00:00
5c0685d35e
Don't use timeout 0 to tsleep() when the time is short.
2001-12-12 17:21:36 +00:00
0a4d7b9de3
Add a scanner quirk for keeping the pipes open between device opening.
...
Idea from Enami.
2001-12-12 15:48:18 +00:00
7727919172
Use USBD_NO_COPY in for some transfers where it was missing.
2001-12-12 15:44:47 +00:00
2fdd0f5a4b
Some more paranoia checks when DIAGNOSTIC.
2001-12-12 15:38:58 +00:00
29c3fe261b
Add some comments.
2001-12-12 15:38:27 +00:00
95d1208c14
Regen.
2001-12-12 15:37:21 +00:00
290d3a0d9e
Add some devices.
2001-12-12 15:36:59 +00:00
dfbcffae07
Remove some stupid casts.
2001-12-12 15:36:08 +00:00
2fe5c52a53
Use unsigned ints for device settings.
2001-12-12 15:34:49 +00:00
fae70125c0
Change default value for ebofs.
2001-12-12 15:34:15 +00:00
0680aa8809
Add some ioctl()s for consumer IR.
2001-12-12 15:33:53 +00:00
bb9f9be772
Add uirda.
2001-12-12 15:31:33 +00:00
4a802f4928
Add USB-IrDA bridge.
...
Needs more testing.
2001-12-12 15:27:24 +00:00
22735e5d44
Move usbd_clear_endpoint_toggle() prototype to usbdi.h.
2001-12-12 15:23:58 +00:00
968318a989
Use vendor/product variables
2001-12-12 14:24:53 +00:00
0f983137af
Don't change wire protocol state in umass generic function
2001-12-12 13:23:20 +00:00
54e3c1962e
bcopy -> memcpy
2001-12-12 13:17:03 +00:00
51b292ea65
Added support for the PowerStorm 4d20, initial support that is.
...
I plan on cleaning a few things up over the next few days, but this
appears to be working for me.
2001-12-12 07:50:05 +00:00
94448f7e52
Update the ramdac interface to be allow the setting of dotclocks. This is
...
required to support the driver in ibm561.c.
2001-12-12 07:47:46 +00:00
8ffabd82eb
Initial support for the IBM RGB561 RAMDAC. This uses the same interface
...
as the Bt463 and Bt485 drivers.
2001-12-12 07:46:48 +00:00
8e6f7afb5b
MKfoo=no -> NOfoo
2001-12-12 01:48:43 +00:00
1ad59a57f2
Recognized Danube chip as well.
...
Small cleanup.
2001-12-11 21:34:06 +00:00
f696afd8ff
Name changes: {KBD,MS}_BPS => {KBD,MS}_DEFAULT_BPS
2001-12-11 17:27:25 +00:00
f1e83bd500
Regen.
2001-12-11 11:21:56 +00:00
a2b8531ff3
Add some Intel/ICP-Vortex/Compaq products.
2001-12-11 11:21:01 +00:00
b327c956d1
Regen: add product ID for the Motorola MPC107.
2001-12-11 11:00:45 +00:00
4e24ace442
Add product ID for the Motorola MPC107.
2001-12-11 10:57:50 +00:00
0fc3ae7e76
Add (some) register definitions for the Motorola MPC105 PCI Bridge/Memory
...
Controller (PCIB/MC).
2001-12-10 12:09:33 +00:00
aa816a6d89
Regen.
2001-12-10 03:36:54 +00:00
9cfe511c73
Add some devices.
2001-12-10 03:36:12 +00:00
9d39bbf3a8
Support for dvd region code (RPC).
2001-12-09 22:56:10 +00:00
3cdc6f6197
Changed clocktl interface to use syscallargs structures
2001-12-09 16:10:43 +00:00
14deefd5b1
pckbd_enable is called during autoconfig. Using pckbc_enqueue_cmd at
...
that time will have bad results, such as queue corruption because
of multiple TAILQ_INSERTs, etc, because it's not designed to work
in an interrupt/context-free environment. Use pckbc_poll_cmd instead.
2001-12-09 13:42:01 +00:00
80c46be6c1
KBD_BPS => KBD_DEFAULT_BPS (sync with ms driver nomenclature).
2001-12-09 12:03:32 +00:00
augustss