Add the ustir driver, for SigmaTel STIr4200 USB/IrDA Bridge.
Written by David Sainty <David.Sainty@dtsp.co.nz>.
This commit is contained in:
augustss
parent
a86fbba5c1
commit
eb62bf638c
|
|
@ -1,4 +1,4 @@
|
|||
# $NetBSD: files.usb,v 1.38 2002/01/02 03:21:36 augustss Exp $
|
||||
# $NetBSD: files.usb,v 1.39 2002/01/03 18:54:32 augustss Exp $
|
||||
#
|
||||
# Config file and device description for machine-independent USB code.
|
||||
# Included by ports that need it. Ports that use it must provide
|
||||
|
|
@ -104,6 +104,12 @@ attach uirda at uhub
|
|||
file dev/usb/uirda.c uirda
|
||||
|
||||
|
||||
# SigmaTel IrDA bridge
|
||||
device ustir: irbus, irdasir
|
||||
attach ustir at uhub
|
||||
file dev/usb/ustir.c ustir
|
||||
|
||||
|
||||
# Misc
|
||||
# Diamond Multimedia Rio 500
|
||||
device urio
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,173 @@
|
|||
/* $NetBSD: ustirreg.h,v 1.1 2002/01/03 18:54:32 augustss Exp $ */
|
||||
|
||||
/*
|
||||
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This code is derived from software contributed to The NetBSD Foundation
|
||||
* by David Sainty <David.Sainty@dtsp.co.nz>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. All advertising materials mentioning features or use of this software
|
||||
* must display the following acknowledgement:
|
||||
* This product includes software developed by the NetBSD
|
||||
* Foundation, Inc. and its contributors.
|
||||
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
||||
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
||||
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Registers definitions for SigmaTel STIr4200 USB/IrDA Bridge
|
||||
* Controller. Documentation available at:
|
||||
* http://extranet.sigmatel.com/library/infrared/stir4200/stir4200-ds.pdf
|
||||
*/
|
||||
|
||||
/* Notes:
|
||||
*
|
||||
* The data sheet states that the TX and RX frames are prepended with
|
||||
* BOF characters. This appears to be incorrect, the standard 0xff
|
||||
* characters behave as expected.
|
||||
*
|
||||
* There does not appear to be any way to get asynchronous
|
||||
* notifications from this device that data is waiting. You simply do
|
||||
* have to poll continuously looking for a non-zero-length result.
|
||||
*
|
||||
* The SigmaTel drivers provided with the device for other operating
|
||||
* systems poll at full USB speed (1000 per second), which has a
|
||||
* significant impact on the system.
|
||||
*/
|
||||
|
||||
/*
|
||||
* The SigmaTel device is controlled via an array of registers, with
|
||||
* generic register read/write commands. This is a completely
|
||||
* different approach to that defined in the USB IrDA standard.
|
||||
*/
|
||||
#define STIR_REG_MODE 1
|
||||
#define STIR_REG_BRATE 2
|
||||
#define STIR_REG_CONTROL 3
|
||||
#define STIR_REG_SENSITIVITY 4
|
||||
#define STIR_REG_STATUS 5
|
||||
#define STIR_REG_FFCNT_LSB 6
|
||||
#define STIR_REG_FFCNT_MSB 7
|
||||
#define STIR_REG_DPLL 8
|
||||
#define STIR_REG_IRDIG 9
|
||||
|
||||
/* Register numbers range from zero to STIR_MAX_REG */
|
||||
#define STIR_MAX_REG 15
|
||||
|
||||
|
||||
/* Mode register bits */
|
||||
#define STIR_RMODE_FIR 0x80
|
||||
#define STIR_RMODE_MIR 0x40
|
||||
#define STIR_RMODE_SIR 0x20
|
||||
#define STIR_RMODE_ASK 0x10
|
||||
|
||||
/*
|
||||
* FASTRXEN can be set to enable simultaneous reads and writes. It
|
||||
* isn't clear that this is useful, the RX and TX data is mixed into
|
||||
* the FIFO and the chip appears to get into a funny state. In the
|
||||
* absence of good documentation about this bit, leave it disabled!
|
||||
*/
|
||||
#define STIR_RMODE_FASTRXEN 0x08
|
||||
|
||||
#define STIR_RMODE_FFRSTEN 0x04
|
||||
|
||||
/* FFSPRST must be set to enable the FIFO */
|
||||
#define STIR_RMODE_FFSPRST 0x02
|
||||
|
||||
/*
|
||||
* High bit baud rate generator value, used in conjunction with the
|
||||
* BRATE register.
|
||||
*/
|
||||
#define STIR_RMODE_PDCLK8 0x01
|
||||
|
||||
|
||||
/* Status register bits */
|
||||
#define STIR_RSTATUS_EOFRAME 0x80
|
||||
#define STIR_RSTATUS_FFUNDER 0x40
|
||||
#define STIR_RSTATUS_FFOVER 0x20
|
||||
|
||||
/* Set in write direction, cleared in read direction */
|
||||
#define STIR_RSTATUS_FFDIR 0x10
|
||||
|
||||
/*
|
||||
* FFCLR is write-only, and the only writable bit in the STATUS
|
||||
* register.
|
||||
*/
|
||||
#define STIR_RSTATUS_FFCLR 0x08
|
||||
|
||||
#define STIR_RSTATUS_FFEMPTY 0x04
|
||||
#define STIR_RSTATUS_FFRXERR 0x02
|
||||
#define STIR_RSTATUS_FFTXERR 0x01
|
||||
|
||||
|
||||
/* Extract data from portions of registers */
|
||||
#define STIR_GET_SENSITIVITY_CHIPREVISION(x) ((x) & 7)
|
||||
|
||||
/*
|
||||
* According to the documentation, FFCNT may be off by as much as 3
|
||||
* bytes.
|
||||
*/
|
||||
#define STIR_FFCNT_MARGIN 3
|
||||
|
||||
/*
|
||||
* The FIFO size for the device is a fixed 4k bytes
|
||||
*/
|
||||
#define STIR_FIFO_SIZE 0x1000
|
||||
|
||||
/*
|
||||
* Vendor specific device requests
|
||||
*/
|
||||
#define STIR_CMD_WRITEMULTIREG 0x00
|
||||
#define STIR_CMD_READMULTIREG 0x01
|
||||
#define STIR_CMD_READROM 0x02
|
||||
#define STIR_CMD_WRITESINGLEREG 0x03
|
||||
|
||||
/*
|
||||
* The MSB is the MODE register setting, the LSB is the BRATE register
|
||||
* setting.
|
||||
*/
|
||||
#define STIR_BRMODE_4000000 0x8002
|
||||
#define STIR_BRMODE_1152000 0x4001
|
||||
#define STIR_BRMODE_576000 0x4003
|
||||
#define STIR_BRMODE_115200 0x2009
|
||||
#define STIR_BRMODE_57600 0x2013
|
||||
#define STIR_BRMODE_38400 0x201d
|
||||
#define STIR_BRMODE_19200 0x203b
|
||||
#define STIR_BRMODE_9600 0x2077
|
||||
#define STIR_BRMODE_2400 0x21df
|
||||
|
||||
/*
|
||||
* Extract values from STIR_BRMODE values.
|
||||
*/
|
||||
#define STIR_BRMODE_MODEREG(x) ((x) >> 8)
|
||||
#define STIR_BRMODE_BRATEREG(x) ((x) & 0xff)
|
||||
|
||||
/*
|
||||
* Each transmit frame starts with the sequence:
|
||||
*
|
||||
* 0x55 0xaa LSB(Length) MSB(Length)
|
||||
*/
|
||||
#define STIR_OUTPUT_HEADER_SIZE 4
|
||||
#define STIR_OUTPUT_HEADER_BYTE0 0x55
|
||||
#define STIR_OUTPUT_HEADER_BYTE1 0xaa
|
||||
Loading…
Reference in New Issue