This is particularly useful when using the weston-editor which seems to
cause an issue with cairo_debug_reset_static_data(), as that still seems
to find out there are references laying around, causing a crash when
exiting:
../../../../src/cairo-hash.c:217: _cairo_hash_table_destroy: Assertion
`hash_table->live_entries == 0' failed
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than creating a new PangoContext each time the menu redraw
handler is triggered re-use it if one was created previously.
All toytoolkit clients do create a layout (and implicitly a
PangoContext) but only those that have menu redraw
handler installed will create a new layout for each redraw of the menu,
effectively creating a new PangoContext each time.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We are already doing that before calling theme_render_frame() so no need
to do it again in layout creation.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
These have been in wayland a while back with version 1.20.0.
We also need to update the test client helper with this bump, as
those bind to version 4.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Before this patch, when a new head is found its information is printed
first as "updated" and then as "found" in the log.
The reason is that drm_head_create() calls drm_head_update_info() which
printed the head as "changed". Then drm_head_create() itself prints it
as "found".
This fixes it to print only once as "found".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Mimic the existing behaviour of logging once, but make it once
per output instead of per run.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Mimic the existing behaviour of logging 5 times, with no reset, but
change it so it's per device instead of using a static variable.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The current code only prints this once, and this is a probably a sensible
thing to do, as a clock read failure is probably not a condition that will
correct itself.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Ideally we'd like to see this more than just a single time, but we'd also
like to prevent it from triggering endlessly. Let's also make this happen
per output.
While we're here, use the word "abnormal" instead of "insane"
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We have a few places where we log messages only the first time they occur.
Provide a log throttling implementation so we don't have to open code this
in all the places that need it.
Instead of just logging a single time, allow some finer control. We allow
logging of a specified number of events. Additionally, we have an optional
timeout after which the event count is reset so we can log at most N
events in M ms.
The first new event printed after the timeout expires will also include a
count of suppressed events.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
To avoid the following UAF:
Invalid read of size 8
at 0x4AE5EFF: weston_desktop_get_display (libweston-desktop.c:110)
by 0x4AEB2C9: weston_desktop_xdg_surface_schedule_configure (xdg-shell.c:1160)
by 0x4AEA77A: weston_desktop_xdg_toplevel_set_size (xdg-shell.c:711)
by 0x4AE839D: weston_desktop_surface_set_size (surface.c:504)
by 0x63F7D43: ivi_layout_surface_set_size (ivi-layout.c:1599)
by 0x63F949F: transition_move_resize_view_destroy (ivi-layout-transition.c:311)
by 0x63F9397: layout_transition_destroy (ivi-layout-transition.c:259)
by 0x63F8E0B: ivi_layout_remove_all_surface_transitions (ivi-layout-transition.c:121)
by 0x63F4BC1: ivi_layout_surface_destroy (ivi-layout.c:258)
by 0x63F38AF: layout_surface_cleanup (ivi-shell.c:162)
by 0x63F3D2D: shell_destroy (ivi-shell.c:359)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
Address 0x174202d0 is 0 bytes inside a block of size 152 free'd
at 0x484617B: free (vg_replace_malloc.c:872)
by 0x4AE5EDC: weston_desktop_destroy (libweston-desktop.c:97)
by 0x63F3CF2: shell_destroy (ivi-shell.c:355)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Shutting down the compositor gives us:
Invalid write of size 8
at 0x4B1AEDB: wl_list_remove (wayland-util.c:56)
by 0x4AF05BF: weston_signal_emit_mutable (signal.c:66)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Address 0x17435f20 is 224 bytes inside a block of size 384 free'd
at 0x484617B: free (vg_replace_malloc.c:872)
by 0x17718C7E: hmi_controller_destroy (hmi-controller.c:761)
by 0x4AF059A: weston_signal_emit_mutable (signal.c:62)
by 0x4ACBC2C: weston_compositor_destroy (compositor.c:8629)
by 0x4864A4B: wet_main (main.c:3908)
by 0x10915D: main (executable.c:33)
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Similar to changes in simple-dmabuf-egl, this perform a x-axis
reflection as it has the same NDC values as simple-dmabuf-egl and we get
an inverted image. We do it straight in the shader this time.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The motivations for this are:
- Y_INVERT is not used by most real-world clients.
weston-simple-dmabuf-egl and weston-simple-dmabuf-v4l are one only
known users. Thus this creates a special case just for these demo
clients.
- Some compositors (wlroots) have dropped support for DMA-BUF flags,
so the client no longer runs there.
- Dropping the flag allows compositors to use a KMS hardware plane to
display the buffer.
It keeps the same axis orientation we had in place where we had the
y-invert flag enabled by default, by doing a reflection about x-axis.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Closes: https://gitlab.freedesktop.org/wayland/weston/-/issues/675
Spinning up the full desktop-shell is pointless overhead for most tests,
which don't need the full load.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no need to spin up the full desktop-shell for the vast majority
of our tests. Rework them to use weston-test-desktop-shell, which is
more lightweight and sensible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
listen the signal and destroy the screen
corresponding to the destroyed weston_output.
clear also pending and order layer lists and
unmap all active views on the screen.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
The controller should decide what to do with the views. It can
destroy the views or move the view to other screen. So, don't unmap
the views on the destroy screen event in ivi-layout. Removing typecast
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
listen the signal and create new ivi screens.
this is required to handle hotplug events.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
don't need to check the output in event, remove the typecast
Signed-off-by: Tran Ba Khang(MS/EMC31-XC) <Khang.TranBa@vn.bosch.com>
Some monitors expose a selector for the kind of content that will get
displayed, allowing them to optimise their settings for this particular
content type.
I got access to such a monitor, sadly even setting it to game mode
didn’t lower its atrocious latency, but drm_info[1] reports it to be set
correctly so hopefully it’ll work better with other monitors.
[1] https://github.com/ascent12/drm_info
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
The controller sets the source and destination rectangles for any surface,
based on these parameters configure event is sent from the client application.
The controller commit the properties in the initial time, so
the view mask is capped to the current buffer dimensions of the
client. In runtime the client maybe sends some the bigger
configures of buffers. In this case view mask will be of smaller
dimension compared to the client buffer and it results in un-desired
clipping of client buffer.
To resolve this, use source rectangle as view mask. weston will take
care to clip the boundingbox of view to client buffer dimension if the
view mask is smaller.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Break this into internal and external parts so we don't have to pass
nonsense coordinates from fs_output_create()
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're just going to crash at weston_view_from_global_fixed() anyway if
this is untrue, but we have a similar assertion elsewhere already.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Whether these coordinates are "invalid" (set to an unlikely sentinel value)
or not is based purely on whether pointer->view is valid.
Check pointer->view before using these values every time, and stop
using an "invalid" value entirely.
The reason for this is that in the future we're reworking how 2D
coordinates are handled, and removing the dubious conecept of an invalid
coordinate simplifies things a little.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Sometimes callers don't want them, and sometimes (when view is NULL) the
coordinate is invalid.
Waste a tiny bit of time calculating them as needed in the callers
instead.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
sx and sy are meaningless (-1000000) when view is NULL. The case this
is meant to catch is when the surface coordinates change while the
global coordinate doesn't, (eg: max/unmax a window with a keyboard
shortcut) - in that case view will always be set.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're always passing pointer->x, y converted to surface coordinates, or
garbage if view is NULL. Let's just stop passing those coordinates
entirely and calculate them in the function.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Not all callers of weston_pointer_set_focus use weston_compositor_pick_view
to get their coordinate, so let's log something if the coordinate doesn't
make sense.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The ivi-shell keeps track of its surfaces by adding them to the ivi_surface_list
to be able to remove them on shutdown. It also creates an ivi_layout_surface for
a desktop surface, but does not keep track of these surfaces.
During compositor shutdown, libweston prints the following message:
BUG: finalizing a layer with views still on it.
Fix it by adding the created ivi_layout_surface to the ivi_surface_list to
remove the surfaces from the layer during shutdown.
Furthermore, remove the ivi_layout_surface from the desktop surface and free it
when the desktop surface is destroyed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Removes the need to fabricate a fake coordinate pair when calling
weston_drag_set_focus to clear focus.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This lets us say what we really mean instead of passing a NULL output
and garbage co-ordinates.
This will help later when manufacturing garbage coordinates becomes much
harder to do.
The clear_pointer_focus() path continues to do nothing, and is just a FIXME
macro, as it has been for a very long time...
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It's ok if the rectangle is too large: If the calculation fails, the
bounding rectangle is used anyways. However, a rectangle that is too small
will create incorrect results. So make sure to round all edges outwards.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
If a controller requests the layers under a surface that has no views attached,
Weston crashes since it tries to free the array that would be used to return the
found layers, but has not been allocated before.
Free the ppArray only if it was allocated in ivi_layout_get_layers_under_surface
before and no layers were found.
While at it, make it obvious that checking the length is an integer comparison
by comparing it to 0.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Add a new weston-vnc man page, based on the weston-rdp man page.
Also add links in the main weston man page.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This adds basic VNC protocol support using the Neat VNC library
(https://github.com/any1/neatvnc). Neat VNC depends on the AML main
loop library. The backend makes use of AML's integrated epoll backend
and connects AML via file descriptor with the Wayland event loop.
This implementation does not support authentication and hardcodes the
pixel format currently.
Co-authored-by: Philipp Zabel <p.zabel@pengutronix.de>
Co-authored-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
[r.czerwinski@pengutronix.de:
- use new (as of 0.5.0) Neat VNC buffer API, with a buffer pool]
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
[p.zabel@pengutronix.de:
- transform repaint damage to output coordinates
- transform pointer coordinates into global space
- check that outputs and heads are in fact ours, see aab722bb1785..060ef82d9360
- track damage across multiple frame buffers
- choose pixel format by drm_fourcc, see 8b6c3fe0ad
- enable ctrl and alt modifiers
- fix frame timing to achieve a constant repaint rate
- pass initial size explicitly, see f4559b0760
- use resize_output with pixman-renderer, see 55d08f9634e8..84b5d0eb4bee
- allow configuring the refresh rate]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since aml and neatvnc are not packaged yet, build them from source and
install them into the container image, to prepare for building the VNC
backend.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
This reverts commit f6ff85b1b7.
This hack should not be needed anymore for Gitlab at freedesktop.org.
Mainly I worry that it might throw pycobertura off track in a
future patch.
See also: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1027
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
The activation of a view implies, among other things, a change in the
associated view layer which is initially unset. In order for this change
to be reflected in the corresponding surface's output mask, and hence
allow surface damage to trigger output repaints, we need to update the
view transform.
Fixes#674
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Deprecate launcher-logind and disable it by default.
launcher-libseat supports logind, so this shouldn't cause any
regression.
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/488
As a realistic scenario used by clients.
The motivation is to have an easy way to test correct fullscreen
behavior of compositors, as they have to compensate for the smaller
buffer size by adding black bars.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Simon Ser