Assigning a string constant (i.e. memory that we didn't allocate)
to a char* pointer and then freeing that pointer is bad news.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Currently we destroy the renderer before the outputs are destroyed, but
that sometimes leads to an error since a reference to the renderer is
necessary in order to destroy a gl_renderer_output.
Since destroying the renderer is common among all backends, just move
that call into weston_compositor_shutdown() immediately after the
outputs being destroyed.
This adds fullscreen support to the wayland backend. You can make any
output fullscreen by the shortcut CTRL+ALT+F. You can also run weston with
the --fullscreen option which causes it to create a single fullscreen
output.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This cleans up the configuration and command parsing and separates it from
compositor/output initialization.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This commit makes the wayland backend search through the config for
[output] sections with names starting with "WL" and create outputs
accordingly. Outputs created due to the config file support mode, scale,
and transform parameters. It also listens for the --output-count
command-line option.
This brings the wayland backend almost up to par, in terms of functionality
with the X11 backend.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
The only user for this was the wayland backend with the GL renderer. It is
not needed in the Pixman renderer because you can easily create subimages.
All of the fancy output matrix calculations can be replaced by a single
glViewport call. Also, it didn't work with outputs located anywhere but
(0, 0) and I'm pretty sure output transformed outputs would break it too.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This adds a window frame with a close button. Similar to the X11 backend,
The window supports dragging but not resizing.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
This fixes the problem where animations will wait to play until input is
received. In general, it also makes the backend far more responsive.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
https://bugs.freedesktop.org/show_bug.cgi?id=68221
If we are about to finish a frame, but a redraw is pending and we let the
compositor redraw, we need to check for errors. If the redraw fails and
the backend cannot schedule a page-flip, we need to finish the frame,
anyway.
All backends except DRM use a timer to schedule frames. Hence, they cannot
fail. But for DRM, we need to be able to handle drmModePageFlip() failures
in case access got revoked.
This fixes a bug where logind+drm caused keyboard input to be missed as we
didn't reenable it after a failed page-flip during deactivation.
The time spent loading EGL and GLES libraries from disk can be a
considerable hit in some embedded use cases. If Weston is compiled
with EGL support, the binary will depend on those libraries, even if
a software renderer is in use.
This patch splits the GL renderer into a separate loadable module,
and moves the dependency on EGL and GLES to it. The backends still
need the EGL headers for the native types and EGLint. The function
load_module() is renamed to weston_load_module() and exported, so
that it can be used by the backends.
The gl renderer interface is changed so that there is only one symbol
that needs to be dlsym()'d. This symbol contains pointers to all the
functions and data necessary to interact with the renderer. As a side
effect, this change simplifies gl-renderer.h a great deal.
This patch implements the notification of clients during mode_switch.
As discussed on IRC, clients are notified of mode_switch only when the
"native" mode is changed and activated. That means that if the native
mode is changed and the compositor had activated a temporary mode for
a fullscreen surface, the clients will be notified only when the native
mode is restored.
The scaling factor is treated the same way as modes.
AC_USE_SYSTEM_EXTENSIONS enables _XOPEN_SOURCE, _GNU_SOURCE and similar
macros to expose the largest extent of functionality supported by the
underlying system. This is required since these macros are often
limiting rather than merely additive, e.g. _XOPEN_SOURCE will actually
on some systems hide declarations which are not part of the X/Open spec.
Since this goes into config.h rather than the command line, ensure all
source is consistently including config.h before anything else,
including system libraries. This doesn't need to be guarded by a
HAVE_CONFIG_H ifdef, which was only ever a hangover from the X.Org
modular transition.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
[pq: rebased and converted more files]
If you specify e.g. scale=2 in weston.ini an output section for the
X11 backend we automatically upscale all normal surfaces by this
amount. Additionally we respect a buffer_scale set on the buffer to
mean that the buffer is already in a scaled form.
This works with both the gl and the pixman renderer. The non-X
backends compile and work, but don't support changing the output
scale (they do downscale as needed due to buffer_scale though).
This also sends the new "scale" and "done" events on wl_output,
making clients aware of the scale.
This set of changes adds support for searching for a given config file
in the directories listed in $XDG_CONFIG_DIRS if it wasn't found in
$XDG_CONFIG_HOME or ~/.config. This allows packages to install custom
config files in /etc/xdg/weston, for example, thus allowing them to
avoid dealing with home directories.
To avoid a TOCTOU race the config file is actually open()ed during the
search. Its file descriptor is returned and stored in the compositor
for later use when performing subsequent config file parses.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Most backends relies on gettimeofday(2) for output repaint timestamps
but this is not a requirement. Before this patch repaints coming from
idle_repaint() always used gettimeofday(2) for timestamps. For backends
not using that time source this could cause large jumps between
timestamps.
To fix this, timestamps needs to always come from the backend. This
means that the backend needs to always be responsible of starting the
repaint loop in case that the repaint cannot start immediately.
The drm backend implementation is from the patch by Ander Conselvan de
Oliveira found here:
http://lists.freedesktop.org/archives/wayland-devel/2013-February/007393.html
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Before, cairo-util.h would combine pixman and cairo includes. X11 and
Wayland compositors uses this to load an image as a pixman_image_t but are
forced to include cairo headers. Clients use load_cairo_surface to
load images as cairo_surface_t's, but are forced to include pixman.h.
We move the load_image pixman prototype to its own header, so compositors
can get at the pixman prototype without including cairo.h and clients
can include the cairo based function without including pixman.h.
Fix the following build warnings, and the build failures due to the
warning fixes:
CC libshared_cairo_la-image-loader.lo
image-loader.c:369:1: warning: no previous prototype for 'load_image'
CC x11_backend_la-compositor-x11.lo
compositor-x11.c: In function 'x11_output_set_icon':
compositor-x11.c:396:2: warning: implicit declaration of function 'load_image'
compositor-x11.c:396:8: warning: assignment makes pointer from integer without a cast
CC wayland_backend_la-compositor-wayland.lo
compositor-wayland.c: In function 'create_border':
compositor-wayland.c:97:2: warning: implicit declaration of function 'load_image'
compositor-wayland.c:97:8: warning: assignment makes pointer from integer without a cast
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
Backends may move surfaces to different planes, in which case damage is
generated in the primary plane. This damage is usually passed to the
renderer, but in some cases the backend may decide to not render
anything (that's the case when drm compositor scans out a client
buffer). In that case the damage on the primary plane would be
discarded, leading to artifacts later.
This patch makes the backend's responsibility to clear the damage on
the primary plane, so that unrendered damage is kept for as long as
necessary.
This moves the EGLConfig, EGLContext and EGLDisplay fields into
gles2-renderer. It also moves EGLDisplay creation and EGLConfig
selection into gles2-renderer.
This introduces callbacks for output creation and destruction for the
gles2-renderer. This enables the gles2-renderer to have per-output
state. EGL surface creation is now done by the output_create callback
and the EGL surface is stored in the new per-output gles2-renderer
state. On the first output_create call, the gles2-renderer will setup
it's GL context. This is because EGL requires a EGL surface to be able
to use the GL context.
Apply wl_surface.frame request only on the next wl_surface.commit
according to the new protocol.
This makes it explicit, which repaint actually triggered the frame
callback, since commit schedules a repaint. Otherwise, something causing
a repaint before a commit could trigger the frame callback too early.
Ensure all demo clients send commit after wl_surface.frame. Note, that
GL apps rely on eglSwapBuffers() sending commit. In toytoolkit, it is
assumed that window_flush() always does a commit.
compositor-wayland assumes renderer->repaint_output does a commit.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
We move the EGL and GLES2 output repaint code into a new gles2-render.c
file. The eglMakeCurrent, glViewPort, surface loop etc was duplicated
across all backends, but this patch moves it to a new file.
Draw the borders of all the triangles.
v1: original
v2: add keybinding to enable/disable fan debug (super-alt-space),
cycle colors to make it easier to see individual draws, and
redraw undamaged region to clean up previous frames debug
lines
Signed-off-by: Rob Clark <rob@ti.com>
Re-work how the shaders and emitted vertices work. Rather than always
rendering clip-rect sized quads and doing transformation in tex coords
(and requiring the corresponding clipping in frag shader), instead
emit transformed vertices, clipped wrt. dirty region, and use simpler
frag shaders. Also, split the rendering, so blended surfaces with an
opaque region have the opaque region drawn with blend disabled. The
result is considerably fewer pixels drawn with blend enabled, and much
fewer cycles in the frag shader.
This requires having some more complex logic to figure out the vertices
of the shape which forms the intersection of the clip rect and the
transformed surface. Which has perhaps got a few bugs or missing cases,
still (visual glitches in some cases) but at this point more or less is
starting to work. I think it is at least far enough along to get some
initial review.
The result, on small SoC GPU (omap4/pandaboard) on 1920x1080 display,
for simple stuff like moving windows around, I get 60fps (before 30fps
or less), and pushing YUV buffers for hw decoded 1080p video goes from
~6fps to 30fps, with no drop in framerate for transformed/rotated video
surface.
v1: original
v2: check that perpendicular intersect vertex falls within bounds of
transformed surface
v3: update w/ comments and fixes from Pekka Paalanen
v4: fix for full surface alpha from Pekka Paalanen, fix compositor-
wayland build
Signed-off-by: Rob Clark <rob@ti.com>
This patch allows rotation and mirroring outputs for x11 and drm backends.
A new 'transform' key can be set in the [output] section. From the protocol:
"The flipped values correspond to an initial flip around a vertical axis
followed by rotation."
The transform key can be one of the following 8 strings:
normal
90
180
270
flipped
flipped-90
flipped-180
flipped-270
We don't want to send enter/leave events to the compositor when the pointer
enters the surface, only when the pointer enters the content area. This
avoids hiding the cursor when entering the frame and sending out-of-bounds
coordinates to notify_pointer_focus().
When we hit a segv, it's often the case that we might crash again in
the attempt to clean up. Instead we introduce a minimal restore callback
in the backend abstraction, that shuts down as simply as possible. Then
we can call that from the segv handler, and then to aid debugging, we
raise SIGTRAP in the segv handler. This lets us run gdb on weston from
a different vt, and if we tell gdb
(gdb) handle SIGSEGV nostop
gdb won't stop when the segv happens but let weston clean up and switch vt,
and then stop when SIGTRAP is raised.
It's also possible to just let gdb catch the segv, and then use sysrq+k
followed by manual vt switch to get back.
Simplify RGB shader code and split off common code that could be reused.
This is preparatory work for YUV shaders.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
weston_compositor_init is always called late because most
implementations can't initialise GL until fairly late in the game.
Split it into a base version with the same name, followed by
weston_compositor_init_gl which can be called later on.
This simplifies compositor-wayland, which no longer needs a separate
global handler just for wl_seat.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Use the wl_keyboard::modifiers events our parent helpfully sends us to
make sure our views of the keyboard state are always identical, rather
than relying on key press events to do the right thing.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If update_state is true, then notify_key will continue to call
xkb_key_update_state to update the local state mask, as before this
commit. Otherwise, it will rely on the compositor to manually update
the state itself, for nested compositors.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
EGLDisplay is helpfully typedeffed as void *, which means that you won't
get conflicting-pointer-type warnings if you accidentally confuse it
with weston_compositor::wl_display. Rename it to make it more clear
which display you're dealing with, and also rename compositor-wayland's
parent.display member to parent.wl_display.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We'll get a rash of seats added when we run our first wl_display_iterate
across the parent display, but won't actually be ready to create them.
Create a new global listener on our parent display for wl_seats only,
and run that from wayland_input_create.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
These keymap events communicate the keymap from the compositor to the
clients via fd passing, rather than having the clients separately
compile a map.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We were accidentally trying to initialise the wl_seat we just got from
our host server as a weston_seat, rather than the weston_seat we set up
earlier ...
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This allows backends to generate their own keymaps and pass them in for
use rather than always forcing a single global keymap, which is
particularly useful for nested compositors.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Instead of using a uint32_t for state everywhere (except on the wire,
where that's still the call signature), use the new
wl_keyboard_key_state enum, and explicit comparisons.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Instead of using a uint32_t for state everywhere (except on the wire,
where that's still the call signature), use the new
wl_pointer_button_state enum, and explicit comparisons.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This event lets the compositor inform clients of the canonical keyboard
modifier/group state. Make sure we send it at appropriate moments from
the compositor, and listen for it in clients as well.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
wl_input_device has been both renamed and split. wl_seat is now a
virtual object representing a group of logically related input devices
with related focus.
It now only generates one event: to let clients know that it has new
capabilities. It takes requests which hand back objects for the
wl_pointer, wl_keyboard and wl_touch interfaces it exposes which all
provide the old input interface, just under different names.
This commit tracks these changes in weston and the clients, as well as
similar renames (e.g. weston_input_device -> weston_seat). Some other
changes were necessary, e.g. renaming the name for the visible mouse
sprite from 'pointer' to 'cursor' so as to not conflict.
For simplicity, every seat is always exposed with all three interfaces,
although this will change as time goes on.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
To add greater precision when working with transformed surfaces and/or
high-resolution input devices.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Switching display mode may happen when:
1. The fullscreen surface is at top most in fullscreen layer and with
"driver" method. Shell will switch output mode to match the surface
size. If no matched mode found, fall back to "fill" method.
2. The top fullscreen surface is destroyed or unset. Switch back to the
origin mode.
Some GL implementations do not provide GL_EXT_read_format_bgra
extension.
Set a glReadPixels format based on whether the extensions is supported
or not, and use that format in all backends.
Add RGBA->BGRA swapping copy to screenshooter to keep the shm buffer
data format as BGRA.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
