The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/20230403171232.000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch provides accessor functions as replacements for direct
access to slot_reserved_mask according to the comment at the top
of include/hw/pci/pci_bus.h which advises that data structures for
PCIBus should not be directly accessed but instead be accessed using
accessor functions in pci.h.
Three accessor functions can conveniently replace all direct accesses
of slot_reserved_mask. With this patch, the new accessor functions are
used in hw/sparc64/sun4u.c and hw/xen/xen_pt.c and pci_bus.h is removed
from the included header files of the same two files.
No functional change intended.
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <b1b7f134883cbc83e455abbe5ee225c71aa0e8d0.1678888385.git.brchuckz@aol.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [sun4u]
igb can use this function to change its behavior depending on the
number of virtual functions currently enabled.
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These two helpers enable host bridges to operate differently depending on
the number of downstream ports, in particular if there is only a single
port.
Useful for CXL where HDM address decoders are allowed to be implicit in
the host bridge if there is only a single root port.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230227153128.8164-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This infrastructure will be reused for CXL RAS error injection
in patches that follow.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
PCIe r6.0 Figure 6-3 "Pseudo Logic Diagram for Selected Error Message Control
and Status Bits" includes a right hand branch under "All PCI Express devices"
that allows for messages to be generated or sent onwards without SERR#
being set as long as the appropriate per error class bit in the PCIe
Device Control Register is set.
Implement that branch thus enabling routing of ERR_COR, ERR_NONFATAL
and ERR_FATAL under OSes that set these bits appropriately (e.g. Linux)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
This register in AER should be both writeable and should
have a default value with a couple of the errors masked
including the Uncorrectable Internal Error used by CXL for
it's error reporting.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Message-Id: <20230302133709.30373-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
acpi-index is now working with non-hotpluggable buses
(pci/q35 machine hostbridge), it can be used even if
ACPI PCI hotplug is disabled and as result acpi-index
uniqueness check will be omitted (since the check is
done by ACPI PCI hotplug handler, which isn't wired
when ACPI PCI hotplug is disabled).
Move check and related code to generic PCIDevice so it
would be independent of ACPI PCI hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the property may flip its state
during VM bring up or just doesn't work as
the name implies.
In particular with PCIE root port that has
'hotplug={on|off}' property, and when it's
turned off, one would expect
'hotpluggable' == false
for any devices attached to it.
Which is not the case since qbus_is_hotpluggable()
used by the property just checks for presence
of any hotplug_handler set on bus.
The problem is that name BusState::hotplug_handler
from its inception is misnomer, as it handles
not only hotplug but also in many cases coldplug
as well (i.e. generic wiring interface), and
it's fine to have hotplug_handler set on bus
while it doesn't support hotplug (ex. pcie-slot
with hotplug=off).
Another case of root port flipping 'hotpluggable'
state when ACPI PCI hotplug is enabled in this
case root port with 'hotplug=off' starts as
hotpluggable and then later on, pcihp
hotplug_handler clears hotplug_handler
explicitly after checking root port's 'hotplug'
property.
So root-port hotpluggablity check sort of works
if pcihp is enabled but is broken if pcihp is
disabled.
One way to deal with the issue is to ask
hotplug_handler if bus it controls is hotpluggable
or not. To do that add is_hotpluggable_bus()
hook to HotplugHandler interface and use it in
'hotpluggable' property + teach pcie-slot to
actually look into 'hotplug' property state
before deciding if bus is hotpluggable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trace how IRQ are rooted from EP to RC.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230211152239.88106-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It should not be zero, the only valid values are ON, OFF and BLINK.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-13-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In pcie_cap_slot_write_config() we check for PCI_EXP_SLTCTL_PWR_OFF in
a bad form. We should distinguish PCI_EXP_SLTCTL_PWR which is a "mask"
and PCI_EXP_SLTCTL_PWR_OFF which is value for that mask.
Better code is in pcie_cap_slot_unplug_request_cb() and in
pcie_cap_update_power(). Let's use same pattern everywhere. To simplify
things add also a helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-12-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
*_by_mask() helpers shouldn't be used here (and that's the only one).
*_by_mask() helpers do shift their value argument, but in pcie.c code
we use values that are already shifted appropriately.
Happily, PCI_EXP_SLTCTL_PWR_ON is zero, so shift doesn't matter. But if
we apply same helper for PCI_EXP_SLTCTL_PWR_OFF constant it will do
wrong thing.
So, let's use instead pci_word_test_and_clear_mask() which is already
used in the file to clear PCI_EXP_SLTCTL_PWR_OFF bit in
pcie_cap_slot_init() and pcie_cap_slot_reset().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-11-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have indicator values in
include/standard-headers/linux/pci_regs.h , no reason to reinvent them
in include/hw/pci/pcie_regs.h. (and we already have usage of
PCI_EXP_SLTCTL_PWR_IND_BLINK and PCI_EXP_SLTCTL_PWR_IND_OFF in
hw/pci/pcie.c, so let's be consistent)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-9-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_EXP_SLTCTL_PIC_OFF is a value, and PCI_EXP_SLTCTL_PIC is a mask.
Happily PCI_EXP_SLTCTL_PIC_OFF is a maximum value for this mask and is
equal to the mask itself. Still the code looks like a bug. Let's make
it more reader-friendly.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-8-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename it to shpc_device_get_slot(), to mention what it does rather
than how it is used. It also helps to reuse it in further commit.
Also, add a return value and get rid of local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-7-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We'll need it in further patch to report bridge in QAPI event.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-6-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Free slot if both conditions (power-led = OFF and state = DISABLED)
becomes true regardless of the sequence. It is similar to how PCIe
hotplug works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-5-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ENABLED -> PWRONLY transition is not allowed and we handle it by
shpc_invalid_command(). But PWRONLY -> ENABLED transition is silently
ignored, which seems wrong. Let's handle it as correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-4-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The result of the function is always one byte. The result is always
assigned to uint8_t variable. Also, shpc_get_status() should be
symmetric to shpc_set_status() which has uint8_t value argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 is not a valid state for the led. Let's start with OFF.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Anton Kuchin <antonkuchin@yandex-team.ru>
Message-Id: <20230216180356.156832-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The code that collects the available NIC models is not really specific
to PCI anymore and will be required in the next patch, too, so let's
move this into a new separate function in net.c instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
function doesn't need RW aceess to passed in bus pointer,
make it const.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
simplify build_append_pci_bus_devices() a bit by handling bridge
specific logic in bridge dedicated AcpiDevAmlIfClass::build_dev_aml
callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... so that the concrete impl. won't has to duplicate it
every time. By default it doesn't do anything unless leaf class
defines and sets AcpiDevAmlIfClass::build_dev_aml handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI PCI hotplug for Q35 was introduced (6.1), it was implemented
by hiding HPC capability on PCIE slot. That however led to a number of
regressions and to fix it, it was decided to keep HPC cap exposed
in ACPI PCI hotplug case and force guest in ACPI PCI hotplug mode
by other means [1].
That reduced meaning of x-native-hotplug to a compat knob [2] for
broken 6.1 machine type.
Rename property to match its current purpose.
1) 211afe5c69 (hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC)
2) c318bef762 (hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pressing attention button has special meaning when power indicator is
blinking. Better just not do it.
For example, trying to remove device immediately after hotplug leads to
both commands succeded but device not actually unrealized.
Same thing for PCIE hotplug was done in
81124b3c7a "pcie: add power indicator blink check"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221116214458.82090-1-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and
pci_map_irq_fn to a PCI bus. This coupling gets in the way when the
pci_map_irq_fn is board-specific while the pci_set_irq_fn is device-
specific.
For example, both of QEMU's PIIX south bridge models have different
pci_map_irq_fn implementations which are board-specific rather than
device-specific. These implementations should therefore reside in board
code. The pci_set_irq_fn's, however, should stay in the device models
because they access memory internal to the model.
Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the
assignments to be decoupled, resolving the problem described above.
Note also how pci_vpb_realize() which gets touched in this commit
assigns different pci_map_irq_fn's depending on the board.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-5-shentey@gmail.com>
[PMD: Factor out in vfu_object_set_bus_irq()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl
misc fixes, cleanups, documentation
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOi/OQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGCkH/j06y7PEDHfG1MnPoFQIEWKHPyU/FMUe1RCW
dRsfVmHZ8Jc1Jy4wVch461QpcIC+WL/Fshzh92G0hVDI2AWzJOxzpWQESmCphJJG
Olk/H/ort4ZIrwOynAHDKLzgltoTI91uao3UT7w67NumAgVYYW4Q9ObHm2G3Wmwc
fe763NmlObrNYYCIbJw/KiBLrk7M5LaMLPeoRGJefD4MYUAPXy/sUQt61VyuZpuG
xFAeDB7/76MXFKJVjccSnZfa8lihOJ5AlvCBTjjY5PbGl8+U1usdd3hOVComYb02
LW4sKLkxe5sycg/bFQdBLpz2lZVlMjpY9nd9YiumIrgLBv70Uf0=
=WyvK
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
make TCO watchdog work by default
part of generic vdpa support
asid interrupt for vhost-vdpa
added flex bus port DVSEC for cxl
misc fixes, cleanups, documentation
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 21 Dec 2022 12:32:36 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
contrib/vhost-user-blk: Replace lseek64 with lseek
libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq
hw/virtio: Extract QMP related code virtio-qmp.c
hw/virtio: Extract config read/write accessors to virtio-config-io.c
hw/virtio: Constify qmp_virtio_feature_map_t[]
hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[]
hw/virtio: Rename virtio_ss[] -> specific_virtio_ss[]
hw/virtio: Add missing "hw/core/cpu.h" include
hw/cxl/device: Add Flex Bus Port DVSEC
hw/acpi: Rename tco.c -> ich9_tco.c
acpi/tests/avocado/bits: add mformat as one of the dependencies
docs/acpi/bits: document BITS_DEBUG environment variable
pci: drop redundant PCIDeviceClass::is_bridge field
remove DEC 21154 PCI bridge
vhost: fix vq dirty bitmap syncing when vIOMMU is enabled
acpi/tests/avocado/bits: add SPDX license identifiers for bios bits tests
include/hw: attempt to document VirtIO feature variables
vhost-user: send set log base message only once
vdpa: always start CVQ in SVQ mode if possible
vdpa: add shadow_data to vhost_vdpa
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
and use cast to TYPE_PCI_BRIDGE instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221129101341.185621-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
When argument @error_status is symbolic, flag -c is ignored. Reject
it instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221201121133.3813857-14-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-13-armbru@redhat.com>
I'd like to use @err for an Error *err. Rename PCIEAERErr err to
aer_err.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-11-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-10-armbru@redhat.com>
PCI AER error status is 32 bit. The HMP command supports both
symbolic and numeric error status: anything that isn't a known
symbolic value is parsed as number with strtol(). Issues:
* Empty argument yields value zero.
* Range errors from strtol() are ignored, value is UINT32_MAX.
* Values not representable in uint32_t are silently truncated.
Fix to reject such input by switching to strtoui().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-9-armbru@redhat.com>
This method is for HMP command "info qtree".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-8-armbru@redhat.com>
pcibus_dev_print() contains a copy of get_class_desc(). Call the
function instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-7-armbru@redhat.com>
We compile pci-hmp-cmds.c always, but pci-qmp-cmds.c only when
CONFIG_PCI. hw/pci/pci-stub.c keeps the linker happy when
!CONFIG_PCI. Build pci-hmp-cmds.c that way, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-6-armbru@redhat.com>
QMP query-pci and HMP info pci can behave differently when there are
no PCI devices. They can report nothing, like this:
qemu-system-aarch64 -S -M spitz -display none -monitor stdio
QEMU 7.1.91 monitor - type 'help' for more information
(qemu) info pci
Or they can fail, like this:
qemu-system-microblaze -M petalogix-s3adsp1800 -display none -monitor stdio
QEMU 7.1.91 monitor - type 'help' for more information
(qemu) info pci
PCI devices not supported
They fail when none of the target's machines supports PCI, i.e. when
we're using qmp_query_pci() from hw/pci/pci-stub.c.
The error is not useful, and reporting nothing makes sense, so do that
in pci-stub.c, too.
Now qmp_query_pci() can't fail anymore. Drop the dead error handling
from hmp_info_pci().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-5-armbru@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "PCI".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-4-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to "PCI".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-3-armbru@redhat.com>
[Commit message improved]
Fix a few style violations so that checkpatch.pl won't complain when I
move this code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-2-armbru@redhat.com>
