In oneshot mode, the delta needs to come from the TimerLoad register,
not the maximum limit.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reload the timer when TimerControl is written, if the timer is to be
enabled. Otherwise, if an earlier write to TimerLoad was done while
periodic mode was not set, s->delta may incorrectly still have the value
of the maximum limit instead of the value written to TimerLoad.
This problem is evident on versatileap on current linux-next, which
enables TIMER_CTRL_32BIT before writing to TimerLoad and then enabling
periodic mode and starting the timer. This causes the first periodic
tick to be scheduled to occur after 0xffffffff periods, leading to a
perceived hang while the kernel waits for the first timer tick.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support to read manufacturer and device ID. For everything else (eg.
lock bits) 0 is returned.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 3d53f5c36f introduced a segfault by erroneously making fw_cfg a
'void **' and passing it around in different ways.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Computing carry is trivial for some inputs. By avoiding an
external function call, we generate near-optimal code for
the common cases of add+addx (double-word arithmetic) and
cmp+addx (a setcc pattern).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Define OPC_JCC*, OC_JMP*, and EXT_JMPN_Ev. Use them throughout.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the address register overlaps one of the output registers
simply issue the clobbering load last, rather than emitting
an extra move of the address register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Define OPC_MOVB* and OPC_MOVL*; use them throughout.
Use tcg_out_ld/st instead of bare tcg_out_modrm_offset
when it makes sense.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use int32 types instead of target_ulong when computing ICC. This
simplifies the generated code for 32-bit host and 64-bit guest.
Use the same simplified expressions for ICC as were already used
for XCC in carry flag generation.
Simplify the ADD carry generation to not consider a possible carry-in.
Use the more complex carry computation for ADDX only. Use the same
carry algorithm for the XCC result of ADDX. Similarly for SUB/SUBX.
Use the ADD carry generation functions for TADD/TADDTV. Similarly
for SUB and TSUB/TSUBTV.
Tidy the code with respect to CODING_STYLE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Return a target_ulong from compute_C_icc to match the width of the users.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compilation with DEBUG defined
Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
189 was allocated in upstream binutils.
0xbaab was the old temporary value. Still used by some tools and the
linux kernel.
I've seen 115 in older gdb versions, but lets ignore that one.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Setting the registers one by one is easier to read, and gets
optimized by the compiler just the same.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch enhances the algorithm which finds the correct settings for SDL.
For cross compilations (when cross_prefix is set), it looks for sdl-config
with cross prefix. Here is the complete search order:
$(cross_prefix}pkg-config (old, only used for cross compilation)
${cross_prefix}sdl_config (new, only used for cross compilation)
pkg-config (old, needs PATH)
sdl-config (old, needs PATH)
Cross SDL packages (or the user) now can simply set a link (for example
/usr/bin/i586-mingw32msvc-sdl-config -> /usr/i586-mingw32msvc/bin/sdl-config)
which allows cross compilations without PATH modifications.
Without the patch, configure and make (which calls configure) typically
need a non-standard PATH. Failing to set this special PATH results in
broken builds.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For SMP to work with KVM, we need to properly emulate the SIGP Initial Reset
Command. Recent (2.6.32) kernels issue that before the SIGP Reset command that
actually wakes up the vcpu.
This patch makes -smp work on S390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This function had been disabled from the beginning:
see 9fddaa0c0c
cpu_reset() function is in target-ppc/helper.c
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds a firmware blob to the S390 target. The blob is a simple
implementation of a virtio client that tries to read the second stage
bootloader from sectors described as of offset 0x20 in the MBR.
In combination with an updated zipl this allows for booting from virtio
block devices. This firmware is built from the same sources as the second
stage bootloader. You can find a virtio capable s390-tools in this repo:
git://repo.or.cz/s390-tools.git
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running with --enable-io-thread the timer we have doesn't help,
because it doesn't wake up the CPU thread. So instead we need to
actually kick it.
While at it I refined the logic a bit to not dumbly trigger a timer
every 500ms, but rather do it more often after an interrupt got injected.
If there's no level based interrupt to be expected, we don't need the
timer anyways.
This makes qemu-system-ppc with --enable-io-thread work when using KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
chardev_init functions use socket,so socket_init() shoud be placed at
the front of chardev_init on win32.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the user wants to create a chardev of type socket but forgets to give a
host= option, qemu_opt_get returns NULL. This NULL pointer is then fed into
strlen a few lines below without a check which results in a segfault.
This fixes it.
Signed-off-by: Jens Osterkamp <jens@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.
One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.
Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.
Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The special case doesn't really us buy anything. Without it vvfat works more
consistently as a protocol. We get raw on top of vvfat now, which works just
as well as using vvfat directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'parent' field in the 'query-blockstats' monitor command is
part of the top level block device QDict, not part of the 2nd
level 'stats' QDict.
* block.c: Fix docs for 'parent' field in block stats monitor
command output
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a call to free() where qemu_free() should instead be used.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fix is based on a patch from Kevin Wolf. Here his comment:
"The number of blocks needs to be rounded up to cover all of the virtual hard
disk. Without this fix, we can't even open our own images if their size is not
a multiple of the block size."
While Kevin's patch addressed vdi_create, my modification also fixes
vdi_open which now accepts images with odd disk sizes.
v3:
Don't allow reading of disk images with too large disk sizes.
Neither VBoxManage nor old versions of qemu-img read such images.
This change requires rounding of odd disk sizes before we do the checks.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: François Revol <revol@free.fr>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Dmg actually does an lseek to a negative offset in the open routine,
which we replace with offset arithmetics after doing a bdrv_getlength.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use pread instead of lseek + read in preparation of using the qemu
block API. Note that dmg actually uses the implicit file offset
a lot in dmg_open, and we had to replace it with an offset variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When dmg_read_chunk encounters an uncompressed chunk it currently
calls read without any previous adjustment of the file postion.
This seems very wrong, and the "reference" implementation in
dmg2img does a search to the same offset as done in the various
compression cases, so do the same here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VHD algorithm calculates a disk geometry
which is usually smaller than the requested size.
QEMU tried to round up but failed for certain sizes:
qemu-img create -f vpc disk.vpc 9437184
would create an image with 9435136 bytes
(which is too small for qemu-img convert).
Instead of hacking the geometry algorithm, the patch
increases the number of sectors until we get enough
sectors.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even it is not very useful, users may create images of size 0.
Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz
aborts execution when it is told to allocate 0 bytes,
so avoid this kind of call.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reopening the image, don't guess the driver, but use the same driver as
was used before. This is important if the format=... option was used for that
image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can't assume the file protocol for Windows devices, they need the same
detection as other files for which an explicit protocol is not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When cancelling a request, bdrv_aio_cancel may decide that it waits for
completion of a request rather than for cancellation. IDE therefore can't
abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback
of a completed request would use invalid data.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
