When starting a remote connection GDB sends an '+':
/* Ack any packet which the remote side has already sent. */
remote_serial_write ("+", 1);
which gets flagged as a garbage character in the gdbstub state
machine. As gdb does send it out lets be permissive about the handling
so we can better see real issues.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: gdb-patches@sourceware.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-9-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The original fix caused problems with spurious characters on other
system emulation. So:
- instead of spamming output make the warning a trace point
- ensure we only allow a stop reply if it was 0x3
Suggested-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <456ed3318421dd7946bdfb5ceda7e05332da368c.1690910333.git.quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-8-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without -S we run into potential races with tests starting before the
gdbstub attaches. We don't need to worry about user-mode as enabling
the gdbstub implies we wait for the initial connection.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-7-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A patch to pass the correct exception address when handling floating
point exceptions.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmTT95sACgkQw7McLV5m
J+TV2g/8CTpOm2bvyFF0YmRhmTBit0kqyDcX1Shi8/2SMO4++CCpIp1mlaxdHZKe
swdOqIqJeCl3+v+z4xN3ubNMis1Gac8DmXVpVmnUoocDS6m0zM3ly9kETKjYy2vn
+GLGzOJ+GnPeQ2oApWwOyCqdCwSx2ZuIYK+FRKIx8T1pRm4Nb1gGP6nRKYAy0+C9
aINdaQEZrFMKl8mlEuGcNmw5YDVvT6M9+KAMaNG0AzG8N9oMCo8VZpeY4z0qkZVp
forksGucRoWVZ5JWl6kzcPAxxAf49olRx0njfbbUcUlyXtsVQpNhPPsdDGAE5gLu
8kHqtRG5OIJUvsZUaedHmJW9BsISnKqIhB7keG72xeBCYPqsKkzpWotq79I50hWY
arTvAbyEwNCPEi1kpevveuGokoKsHKr/6yJRsA2VXM5AFhIy54DkLNz6Zh8W1OGA
Nst45kSt7tQsTwxXHTHWGO6gRK/7ZtSr/afsEYZCz9vRUnb4UMeBBAuM9u0W+WYZ
+hEZivQI7AEVuFbfzCTpw96jAPg4tpJ0JzC0o3Vh/EKIZahrPdzvmBlsV15geu4/
xa5PBWRFpySLEO/6/I9XrIux8wjQ1NHOTC6NtJkH33tu9tJ9pfmyRs+jdUiNwWyd
mMz0jvDUhjGaqUYSbXDvBLcSAIKbpXpnay2StSt0S/Enr08KU+o=
=yZi9
-----END PGP SIGNATURE-----
Merge tag 'or1k-pull-request-20230809' of https://github.com/stffrdhrn/qemu into staging
OpenRISC FPU Fix for 8.1
A patch to pass the correct exception address when handling floating
point exceptions.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmTT95sACgkQw7McLV5m
# J+TV2g/8CTpOm2bvyFF0YmRhmTBit0kqyDcX1Shi8/2SMO4++CCpIp1mlaxdHZKe
# swdOqIqJeCl3+v+z4xN3ubNMis1Gac8DmXVpVmnUoocDS6m0zM3ly9kETKjYy2vn
# +GLGzOJ+GnPeQ2oApWwOyCqdCwSx2ZuIYK+FRKIx8T1pRm4Nb1gGP6nRKYAy0+C9
# aINdaQEZrFMKl8mlEuGcNmw5YDVvT6M9+KAMaNG0AzG8N9oMCo8VZpeY4z0qkZVp
# forksGucRoWVZ5JWl6kzcPAxxAf49olRx0njfbbUcUlyXtsVQpNhPPsdDGAE5gLu
# 8kHqtRG5OIJUvsZUaedHmJW9BsISnKqIhB7keG72xeBCYPqsKkzpWotq79I50hWY
# arTvAbyEwNCPEi1kpevveuGokoKsHKr/6yJRsA2VXM5AFhIy54DkLNz6Zh8W1OGA
# Nst45kSt7tQsTwxXHTHWGO6gRK/7ZtSr/afsEYZCz9vRUnb4UMeBBAuM9u0W+WYZ
# +hEZivQI7AEVuFbfzCTpw96jAPg4tpJ0JzC0o3Vh/EKIZahrPdzvmBlsV15geu4/
# xa5PBWRFpySLEO/6/I9XrIux8wjQ1NHOTC6NtJkH33tu9tJ9pfmyRs+jdUiNwWyd
# mMz0jvDUhjGaqUYSbXDvBLcSAIKbpXpnay2StSt0S/Enr08KU+o=
# =yZi9
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 01:31:23 PM PDT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* tag 'or1k-pull-request-20230809' of https://github.com/stffrdhrn/qemu:
target/openrisc: Set EPCR to next PC on FPE exceptions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
linux-user: Correctly detect access to /proc in openat
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTT0O4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9NeQf/SGtJsvcMdPPcOt1P
ZK9fBK+gS9XzWvkquSL2wehs0ZY61u2IHznIqsFxhhmPqNTZPKb27u6Cg8DCxYdw
Hc+YMtjx2MOBv2pXTCc14XWkTsclP2jJaf2VUFIR/MowBJb7Xcgbv53PvRnCn3xT
KC80Pm6eJZFT0EkQZwHbT8doakkjyIx8JIapdNFvD6Ne0CWCKOwDK9sF5ob1Tf5g
BXyCw5ZtnCiToYw+RpBnhZ1wsInV+o/MV7FwcgrxGWB+4ovwRLknBzAggHvhz3ZO
pdCqvobBtUk88+txMX6ewIDYU9BsuOnWDR+j99MD9/kPtbgSLlRYzxJ0PAjCMG6m
xu0Tyg==
=n1TD
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20230809' of https://gitlab.com/rth7680/qemu into staging
linux-user: Fixes for mmap syscall emulation
linux-user: Correctly detect access to /proc in openat
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTT0O4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9NeQf/SGtJsvcMdPPcOt1P
# ZK9fBK+gS9XzWvkquSL2wehs0ZY61u2IHznIqsFxhhmPqNTZPKb27u6Cg8DCxYdw
# Hc+YMtjx2MOBv2pXTCc14XWkTsclP2jJaf2VUFIR/MowBJb7Xcgbv53PvRnCn3xT
# KC80Pm6eJZFT0EkQZwHbT8doakkjyIx8JIapdNFvD6Ne0CWCKOwDK9sF5ob1Tf5g
# BXyCw5ZtnCiToYw+RpBnhZ1wsInV+o/MV7FwcgrxGWB+4ovwRLknBzAggHvhz3ZO
# pdCqvobBtUk88+txMX6ewIDYU9BsuOnWDR+j99MD9/kPtbgSLlRYzxJ0PAjCMG6m
# xu0Tyg==
# =n1TD
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Aug 2023 10:46:22 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20230809' of https://gitlab.com/rth7680/qemu:
linux-user: Fix openat() emulation to correctly detect accesses to /proc
util/interval-tree: Check root for null in interval_tree_iter_first
tests/tcg: Disable filename test for info proc mappings
linux-user: Use ARRAY_SIZE with bitmask_transtbl
linux-user: Split out do_mmap
qemu/osdep: Remove fallback for MAP_FIXED_NOREPLACE
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In qemu we catch accesses to files like /proc/cpuinfo or /proc/net/route
and return to the guest contents which would be visible on a real system
(instead what the host would show).
This patch fixes a bug, where for example the accesses
cat /proc////cpuinfo
or
cd /proc && cat cpuinfo
will not be recognized by qemu and where qemu will wrongly show
the contents of the host's /proc/cpuinfo file.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230803214450.647040-2-deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix a crash in qemu-user when running
cat /proc/self/maps
in a chroot, where /proc isn't mounted.
The problem was introduced by commit 3ce3dd8ca9 ("util/selfmap:
Rewrite using qemu/interval-tree.h") where in open_self_maps_1() the
function read_self_maps() is called and which returns NULL if it can't
read the hosts /proc/self/maps file. Afterwards that NULL is fed into
interval_tree_iter_first() which doesn't check if the root node is NULL.
Fix it by adding a check if root is NULL and return NULL in that case.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3ce3dd8ca9 ("util/selfmap: Rewrite using qemu/interval-tree.h")
Message-Id: <ZNOsq6Z7t/eyIG/9@p100>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than using a zero tuple to end the table, use a macro
to apply ARRAY_SIZE and pass that on to the convert functions.
This fixes two bugs in which the conversion functions required
that both the target and host masks be non-zero in order to
continue, rather than require both target and host masks be
zero in order to terminate.
This affected mmap_flags_tbl when the host does not support
all of the flags we wish to convert (e.g. MAP_UNINITIALIZED).
Mapping these flags to zero is good enough, and matches how
the kernel ignores bits that are unknown.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New function that rejects unsupported map types and flags.
In 4b840f96 we should not have accepted MAP_SHARED_VALIDATE
without actually validating the rest of the flags.
Fixes: 4b840f96 ("linux-user: Populate more bits in mmap_flags_tbl")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Reclaim Unit Update operation in I/O Management Receive does not
verify the presence of a configured endurance group prior to accessing
it.
Fix this.
Cc: qemu-stable@nongnu.org
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme_directive_receive() does not check if an endurance group has been
configured (set) prior to testing if flexible data placement is enabled
or not.
Fix this.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1815
Fixes: 73064edfb8 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In order for our emulation of MAP_FIXED_NOREPLACE to succeed within
linux-user target_mmap, we require a non-zero value. This does not
require host kernel support, merely the bit being defined.
MAP_FIXED_NOREPLACE was added with glibc 2.28. From repology.org:
Fedora 36: 2.35
CentOS 8 (RHEL-8): 2.28
Debian 11: 2.31
OpenSUSE Leap 15.4: 2.31
Ubuntu LTS 20.04: 2.31
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230808164418.69989-1-richard.henderson@linaro.org>
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Rewrite probe_guest_base
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTSrp4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9lTQf/W/Tbd6CFnZpVE8Sb
BPrhdmo+x6Jftt1Ha66b/4xnasX7DuVaI1ECDh4CQQKIOh9A4LETx6ue9/UGi4vT
Fe4UrrJcAjt/CPaZhwXniJM9CvEnw1gkl3AgKAtZOBEConuPnkTiSWjySmCt3T4r
EGQxDe0HLpWYavNtvyywak/sEbwOD4hNAunFpJB6PLZ+KEoCDZwtcQdl55kg5bIt
WBMgUSXnWhC45t+26OcSDeHovqxHoA647H10T0y0U6bNVkW0tRW51xCTvHt+iDyR
s8UOCe1Q+w8F18fN68HIWBJ6NCzUts/AmQrWwc/MWiK1z91/ht5mlKAuNYnoZ6jH
htCSEA==
=ERAI
-----END PGP SIGNATURE-----
Merge tag 'pull-lu-20230808' of https://gitlab.com/rth7680/qemu into staging
linux-user: Adjust guest image layout vs reserved_va
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Rewrite probe_guest_base
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTSrp4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9lTQf/W/Tbd6CFnZpVE8Sb
# BPrhdmo+x6Jftt1Ha66b/4xnasX7DuVaI1ECDh4CQQKIOh9A4LETx6ue9/UGi4vT
# Fe4UrrJcAjt/CPaZhwXniJM9CvEnw1gkl3AgKAtZOBEConuPnkTiSWjySmCt3T4r
# EGQxDe0HLpWYavNtvyywak/sEbwOD4hNAunFpJB6PLZ+KEoCDZwtcQdl55kg5bIt
# WBMgUSXnWhC45t+26OcSDeHovqxHoA647H10T0y0U6bNVkW0tRW51xCTvHt+iDyR
# s8UOCe1Q+w8F18fN68HIWBJ6NCzUts/AmQrWwc/MWiK1z91/ht5mlKAuNYnoZ6jH
# htCSEA==
# =ERAI
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 08 Aug 2023 02:07:42 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-lu-20230808' of https://gitlab.com/rth7680/qemu:
linux-user: Rewrite non-fixed probe_guest_base
linux-user: Rewrite fixed probe_guest_base
linux-user: Consolidate guest bounds check in probe_guest_base
linux-user: Remove duplicate CPU_LOG_PAGE from probe_guest_base
util/selfmap: Rewrite using qemu/interval-tree.h
linux-user: Use zero_bss for PT_LOAD with no file contents too
linux-user: Do not adjust zero_bss for host page size
linux-user: Do not adjust image mapping for host page size
linux-user: Adjust initial brk when interpreter is close to executable
linux-user: Use elf_et_dyn_base for ET_DYN with interpreter
linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap
linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.h
linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h
linux-user: Adjust task_unmapped_base for reserved_va
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use pgb_addr_set to probe for all of the guest addresses,
not just the main executable. Handle the identity map
specially and separately from the search.
If /proc/self/maps is available, utilize the full power
of the interval tree search, rather than a linear search
through the address list.
If /proc/self/maps is not available, increase the skip
between probes so that we do not probe every single page
of the host address space. Choose 1 MiB for 32-bit hosts
(max 4k probes) and 1 GiB for 64-bit hosts (possibly a
large number of probes, but the large step makes it more
likely to find empty space quicker).
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create a set of subroutines to collect a set of guest addresses,
all of which must be mappable on the host. Use this within the
renamed pgb_fixed subroutine to validate the user's choice of
guest_base specified by the -B command-line option.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The three sets of checks are identical, logically.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The proper logging for probe_guest_base is in the main function.
There is no need to duplicate that in the subroutines.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want to be able to search the set of mappings.
For this patch, the two users iterate the tree in order.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If p_filesz == 0, then vaddr_ef == vaddr. We can reuse the
code in zero_bss rather than incompletely duplicating it in
load_elf_image.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove TARGET_ELF_EXEC_PAGESIZE, and 3 other TARGET_ELF_PAGE* macros
based off of that. Rely on target_mmap to handle guest vs host page
size mismatch.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we attempt to load a ET_DYN executable far away from
TASK_UNMAPPED_BASE, we are not completely in control of the
address space layout. If the interpreter lands close to
the executable, leaving insufficient heap space, move brk.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Re-order after ELF_ET_DYN_BASE patch so that we do not
"temporarily break" tsan, and also to minimize the changes required.
Remove image_info.reserve_brk as unused.]
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Follow the lead of the linux kernel in fs/binfmt_elf.c,
in which an ET_DYN executable which uses an interpreter
(usually a PIE executable) is loaded away from where the
interpreter itself will be loaded.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use this as extra protection for the guest mapping over
any qemu host mappings.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy each guest kernel's default value, then bound it
against reserved_va or the host address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide default values that are as close as possible to the
values used by the guest's kernel.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ensure that the chosen values for mmap_next_start and
task_unmapped_base are within the guest address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CPU model has to be canonicalized to what Meson wants in the cross
file, to what Linux uses for its asm-$ARCH directories, and to what
QEMU uses for its user-mode emulation host/$ARCH directories. Do
all three in a single case statement, and check that the Linux and
QEMU directories actually exist.
At a small cost in repeated lines, this ensures that there are no hidden
ordering requirements between the case statements. In particular, commit
89e5b7935e ("configure: Fix linux-user host detection for riscv64",
2023-08-06) broke ppc64le because it assigned host_arch based on a
non-canonicalized version of $cpu.
Reported-by: Joel Stanley <joel@jms.id.au>
Fixes: 89e5b7935e ("configure: Fix linux-user host detection for riscv64", 2023-08-06)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230808120303.585509-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alpha and 31-bit s390 lack the assembly fragment to handle signals
occurring at the same time as system calls, so they cannot run
linux-user emulation anymore. Drop the host-signal.h files for
them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230808120303.585509-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x32 uses the same signal handling fragments as x86_64, since host_arch
is set to x86_64 when Meson runs. Remove the unnecessary forwarder and
set the host_arch variable properly in configure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230808120303.585509-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add missing entry for pif ("protection information format").
Protection information size can be 8 or 16 bytes, Update the pil entry
as per the NVM command set specification.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The nvme CRC64 generator expects the caller to pass inverted seed value.
Pass inverted crc value for metadata buffer.
Cc: qemu-stable@nongnu.org
Fixes: 44219b6029 ("hw/nvme: 64-bit pi support")
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Hi,
Here is a collection of ui, dump and chardev fixes that are worth for 8.1.
thanks
-----BEGIN PGP SIGNATURE-----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=ANQg
-----END PGP SIGNATURE-----
Merge tag 'fixes-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
Fixes for 8.1
Hi,
Here is a collection of ui, dump and chardev fixes that are worth for 8.1.
thanks
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmTRWDscHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5eUrD/9BvqJ87XSKchV01jji
# PmA+yFyI0JSG68oYbNPYJXxkLWdRCKp6GGcT8h1yiVtGH/SVey9spxDqbV+sK0uW
# FmqIcmSBbjI4A6+Mne07Iyd0QtgL9H6YNenRXDFLIXLh84HP47Dg9vfgx4AsRY7O
# efcCdi43/PoJOelVfn9wIkP/8DU4pZV6IsdtdUxZ3rtu/zwjW61rLzuxtLcAoCIE
# rAYiTp699NH5fKBbMzm3puK4hpaPLj4GuGPrSaWVSCcgARqi7LWpgZC5i+a6FUfS
# eWzK8WkdvHIPaUPRNl70LTWPKVxJ4PdSxFlIKgiH0bnpXHBvJnO2y1v4jaiGI0y2
# WSHKJWY513zTF4B+pMdQLjNiLotkiqtAXHw5rrjPTuVHxi1N5w6Z/BvWOSAvs8V6
# ijYmjksNoqwfpbPRTyu8psLcmj3fo2UIjQ739PgLN2lfC8d+nzdx4PIIq/ybQdZZ
# 7QBJGhxP33Ou8c3ok43Jz3go6w0WOKM0ucG1K1iTVxQ27leMKTO5Zsm2TShG2pMG
# CY6d/dumID8+G7sho8TmtTDjC5ZBkY5e27etkS+P4p+Buc60lqDrL+u6UadxWNZ1
# 3ifsQ1PhVTRuhZUJNMcX1Qo3PuEfAOH1ZuCbvXpubHwcUr4o/ZqlVrMaJtYB3ueo
# 7SX8YistmktaEeN+Y50qoiEVgg==
# =ANQg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Aug 2023 01:46:51 PM PDT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
* tag 'fixes-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
ui/gtk: set scanout mode in gd_egl/gd_gl_area_scanout_texture
hw/i386/vmmouse:add relative packet flag for button status
dump: kdump-zlib data pages not dumped with pvtime/aarch64
virtio-gpu: reset gfx resources in main thread
virtio-gpu: free BHs, by implementing unrealize
chardev: report the handshake error
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixing a regression (black screen) caused by a commit 92b58156e7
("ui/gtk: set scanout-mode right before scheduling draw").
The commit 92b58156e7 was made with an assumption that the scanout
mode needs to be set only if the guest scanout is a dmabuf but there
are cases (e.g. virtio-gpu-virgl) where the scanout is still processed
in a form of a texture but is not backed by dmabuf. So it is needed
to put back the line that sets scanout mode in gd_egl_scanout_texture
and gd_gl_area_scanout_texture.
Fixes: 92b58156e7 ("ui/gtk: set scanout-mode right before scheduling draw)
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230725001131.24017-1-dongwon.kim@intel.com>
The buttons value use macros instead of direct numbers.
If request relative mode, have to add this for
guest vmmouse driver to judge this is a relative packet.
otherwise,vmmouse driver will not match
the condition 'status & VMMOUSE_RELATIVE_PACKET',
and can't report events on the correct(relative) input device,
result to relative mode unuseful.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Message-ID: <20230413081526.2229916-1-zhouzongmin@kylinos.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The kdump-zlib data pages are not dumped from aarch64 host when the
'pvtime' is involved, that is, when the block->target_end is not aligned to
page_size. In the below example, it is expected to dump two blocks.
(qemu) info mtree -f
... ...
00000000090a0000-00000000090a0fff (prio 0, ram): pvtime KVM
... ...
0000000040000000-00000001bfffffff (prio 0, ram): mach-virt.ram KVM
... ...
However, there is an issue with get_next_page() so that the pages for
"mach-virt.ram" will not be dumped.
At line 1296, although we have reached at the end of the 'pvtime' block,
since it is not aligned to the page_size (e.g., 0x10000), it will not break
at line 1298.
1255 static bool get_next_page(GuestPhysBlock **blockptr, uint64_t *pfnptr,
1256 uint8_t **bufptr, DumpState *s)
... ...
1294 memcpy(buf + addr % page_size, hbuf, n);
1295 addr += n;
1296 if (addr % page_size == 0) {
1297 /* we filled up the page */
1298 break;
1299 }
As a result, get_next_page() will continue to the next
block ("mach-virt.ram"). Finally, when get_next_page() returns to the
caller:
- 'pfnptr' is referring to the 'pvtime'
- but 'blockptr' is referring to the "mach-virt.ram"
When get_next_page() is called the next time, "*pfnptr += 1" still refers
to the prior 'pvtime'. It will exit immediately because it is out of the
range of the current "mach-virt.ram".
The fix is to break when it is time to come to the next block, so that both
'pfnptr' and 'blockptr' refer to the same block.
Fixes: 94d788408d ("dump: fix kdump to work over non-aligned blocks")
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713055819.30497-1-dongli.zhang@oracle.com>
Calling OpenGL from different threads can have bad consequences if not
carefully reviewed. It's not generally supported. In my case, I was
debugging a crash in glDeleteTextures from OPENGL32.DLL, where I asked
qemu for gl=es, and thus ANGLE implementation was expected. libepoxy did
resolution of the global pointer for glGenTexture to the GLES version
from the main thread. But it resolved glDeleteTextures to the GL
version, because it was done from a different thread without correct
context. Oops.
Let's stick to the main thread for GL calls by using a BH.
Note: I didn't use atomics for reset_finished check, assuming the BQL
will provide enough of sync, but I might be wrong.
Acked-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230726173929.690601-3-marcandre.lureau@redhat.com>
This can help to debug connection issues.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=2196182
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230510072531.3937189-1-marcandre.lureau@redhat.com>
OpenRISC (or1k) has long long alignment to 4 bytes, but currently not
defined in abitypes.h. This lead to incorrect packing of /epoll_event/
structure and eventually infinite loop while waiting for file
descriptor[s] event[s].
Fixed also CRIS alignments (1 byte for all types).
Signed-off-by: Luca Bonissi <qemu@bonslack.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1770
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The clock and data values were logged swapped. Correct the trace event
text to match what is logged. Also fix a typo in a comment nearby.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As of prior to this patch, the controller checks the value of CC.IOCQES
and CC.IOSQES prior to enabling the controller. As reported by Ben in
GitLab issue #1691, this is not spec compliant. The controller should
only check these values when queues are created.
This patch moves these checks to nvme_create_cq(). We do not need to
check it in nvme_create_sq() since that will error out if the completion
queue is not already created.
Also, since the controller exclusively supports SQEs of size 64 bytes
and CQEs of size 16 bytes, hard code that.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1691
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
